Commit Graph

  • 17ed72cc44 sw_limits: start msec timeout period only after start() call Gerhard Sittig 2020-05-31 11:22:07 +0200
  • dbb3e2ad3d serial: accept bitrate only serialcomm= spec, default to 8n1 frames Gerhard Sittig 2020-05-31 15:23:19 +0200
  • 7718f3ca8f asix-sigma: update comment on channel names (vendor doc says "1-16") Gerhard Sittig 2020-05-23 07:41:55 +0200
  • 2d8a508976 asix-sigma: add support for external clock Gerhard Sittig 2020-05-16 19:37:52 +0200
  • 16791da9c9 asix-sigma: more trigger spec to register values conversion sync with doc Gerhard Sittig 2020-05-16 18:07:37 +0200
  • 7dd766e0aa asix-sigma: rephrase trigger LUT creation (mechanical change) Gerhard Sittig 2020-05-16 17:04:51 +0200
  • 72ea3b84bd asix-sigma: rephrase trigger LUT upload to hardware for readability Gerhard Sittig 2020-05-16 16:27:25 +0200
  • 0f017b7da9 asix-sigma: rephrase and extend register access for readability Gerhard Sittig 2020-05-16 12:13:38 +0200
  • 419f109505 asix-sigma: rephrase firmware dependent param upload at acquisition start Gerhard Sittig 2020-05-16 10:23:15 +0200
  • abcd477196 asix-sigma: keep remaining samplerate handling in protocol.c Gerhard Sittig 2020-05-15 13:59:29 +0200
  • a426f74aca asix-sigma: cosmetics, sort protocol.h function groups Gerhard Sittig 2020-05-15 13:40:26 +0200
  • 7fe1f91f75 asix-sigma: prepare FTDI open/close for "optional open" Gerhard Sittig 2020-05-15 13:29:20 +0200
  • 88a5f9eabe asix-sigma: improve error propagation, increase robustness Gerhard Sittig 2020-05-15 12:13:32 +0200
  • 5c231fc466 asix-sigma: style nits, expression complexity, information locality Gerhard Sittig 2020-05-15 09:06:40 +0200
  • 9334ed6ccd asix-sigma: update copyright notice for recent non-trivial changes Gerhard Sittig 2020-05-13 18:52:32 +0200
  • 2a62a9c44e asix-sigma: more u16 sample memory access nits (timestamps, values) Gerhard Sittig 2020-05-13 18:26:54 +0200
  • a53b8e4d74 asix-sigma: improve robustness of parameter upload to hardware Gerhard Sittig 2020-05-12 21:51:10 +0200
  • 9b4d261fab asix-sigma: style nits, devc in routine signatures, long text lines Gerhard Sittig 2020-05-12 20:09:54 +0200
  • b65649f6b9 asix-sigma: reword list of sample rates, (try to) use 1/2/5 steps Gerhard Sittig 2020-05-12 21:57:13 +0200
  • c749d1ca57 asix-sigma: improve robustness of firmware download, delay and retry Gerhard Sittig 2020-05-12 07:59:54 +0200
  • 80e717b3cf asix-sigma: eliminate magic numbers in firmware file references Gerhard Sittig 2020-05-12 07:20:17 +0200
  • 1bb9dc8217 asix-sigma: mark FPGA config phase in "state" of dev context Gerhard Sittig 2020-05-10 20:06:16 +0200
  • 5e78a56481 asix-sigma: rework time/count limits support, accept more samplerates Gerhard Sittig 2020-05-10 16:45:17 +0200
  • 98b43eb3cd asix-sigma: rephrase submission of logic data to session feed Gerhard Sittig 2020-05-10 09:14:41 +0200
  • 2c33b09255 asix-sigma: eliminate magic numbers in sample memory access Gerhard Sittig 2020-05-09 20:23:23 +0200
  • 7c41c420aa asix-sigma: move FPGA commands before register layout declaration Gerhard Sittig 2020-05-09 18:59:40 +0200
  • 07411a605e asix-sigma: rephrase some of the FPGA command exchange Gerhard Sittig 2020-05-09 18:28:02 +0200
  • 9fb4c6324d asix-sigma: sync FPGA register names with documentation Gerhard Sittig 2020-05-09 17:16:13 +0200
  • dc0906e21c asix-sigma: eliminate magic numbers in FPGA configuration Gerhard Sittig 2020-05-08 16:54:28 +0200
  • 53a939aba5 asix-sigma: rework scan for USB devices, add support for conn= specs Gerhard Sittig 2020-05-03 17:02:17 +0200
  • 742368a2bc asix-sigma: nits in the list of firmware files Gerhard Sittig 2020-05-02 18:37:03 +0200
  • 97aa41e9b5 strutil: introduce sr_atol_base() conversion helper (non-decimal) Gerhard Sittig 2020-05-03 16:38:13 +0200
  • d770bfbbbc tests: extend endianess conversion tests to also cover inline routines Gerhard Sittig 2020-05-27 19:53:09 +0200
  • 080b6bcf09 libsigrok-internal.h: add 24bit little endian reader helper Gerhard Sittig 2020-05-12 23:16:05 +0200
  • f1833600a0 libsigrok-internal.h: rephrase endianess conversion helpers Gerhard Sittig 2020-05-02 18:31:48 +0200
  • f2a9a7c2c8 tests: also cover endianess conversion helpers Gerhard Sittig 2020-05-10 22:37:29 +0200
  • 883db4dad1 hp-3478a: Fix glib variant ref count in SET MQ request. Frank Stettner 2020-05-03 11:55:05 +0200
  • 1c8110dbc7 scpi-dmm: Fix coding style. Frank Stettner 2020-05-03 10:57:35 +0200
  • 6d2e307016 serial-dmm: Added support for Metex ME-21 multimeters Tobias Faeth 2020-05-26 21:07:42 +0200
  • de4dc45eae udev: Add FTDI FT4232 VID/PID. Uwe Hermann 2020-05-02 16:20:32 +0200
  • 9785891436 ftdi-la: Add FT4232H PID:VID. Sergey Rzhevsky 2020-04-12 23:52:38 +0300
  • 77f3c5e51f rigol-ds: Added support for the DS1202Z-E Richard 2020-04-17 13:30:13 +0000
  • 8c381a353c hameg-hmo: use common helper to setup description of an analog value Gerhard Sittig 2020-03-18 15:54:29 +0100
  • 00f3c94386 uni-t-ut32x: drop redundant close and free at end of scan Gerhard Sittig 2019-12-14 09:27:15 +0100
  • ff5fb18526 scpi-dmm: fix glib variant ref count in SET MQ request Gerhard Sittig 2019-12-16 11:26:56 +0100
  • 6cfc6c5c7a Fix compiler warnings related to -Wcast-function-type. Uwe Hermann 2020-05-02 16:11:42 +0200
  • 4c5ac0cf5b siglent-sds: Fix various compiler warnings. Uwe Hermann 2020-05-02 15:39:26 +0200
  • 4704f64551 bt/bt_bluez: Implement retry if rfcomm sockets are busy Andreas Sandberg 2020-02-24 22:46:35 +0000
  • 1d657f47be modbus: Close device after scan v1ne 2020-04-08 17:05:16 +0200
  • 8f3c77db26 scpi-pps: fixed out-of-bounds array access... Florian Schmidt 2020-04-08 12:24:48 +0200
  • f0aec55605 center-3xx: Fix incorrect values due to endianness issue. Uwe Hermann 2020-04-09 23:51:16 +0200
  • 4c5f70063a Use std_session_send_df_frame_begin()/_end() where possible. Uwe Hermann 2020-04-08 23:49:38 +0200
  • 7f7702b81b std: Rename std_session_send_frame_begin/_end(). Uwe Hermann 2020-04-08 23:35:44 +0200
  • 0fa71943e3 Use std_session_send_df_trigger() where possible. Uwe Hermann 2020-04-08 23:21:39 +0200
  • 447c4216fc std: Factor out send_df_without_payload() helper. Uwe Hermann 2020-04-08 23:11:15 +0200
  • 10cf811385 std: Add std_session_send_df_trigger(). Uwe Hermann 2020-04-08 23:02:04 +0200
  • 148cf8bea1 zeroplus-logic-cube: Fix an issue when changing triggers. Uwe Hermann 2020-04-08 22:46:23 +0200
  • 88daa0536c zeroplus-logic-cube: Enable edge-triggering capabilities. Jan Metzger 2020-02-14 08:38:27 +0100
  • c8dcd3ab72 korad-kaxxxxp: Add support for RND KA3005P V5.5 power supply Christian Fruth 2020-04-05 11:26:35 +0200
  • 082ca8d8bc korad-kaxxxxp: Add support for TENMA 72-2540 V5.2 power supply Peter van der Perk 2020-04-06 14:14:06 +0200
  • 78d78afb57 udev: Add TIAO USB Multi Protocol Adapter (TUMPA) VID/PID. Uwe Hermann 2020-04-07 00:53:46 +0200
  • 3ff6cfeebe ftdi-la: add TUMPA VID:PID and JTAG pin names Tom Matthews 2020-03-30 18:32:12 +0100
  • 69c5d959e7 rdtech-dps: Make it work in SmuView v1ne 2020-04-03 03:51:09 +0200
  • 56a1bf7b4b center-3xx: use common signed LE16 conversion for temperature value Gerhard Sittig 2019-12-23 17:00:13 +0100
  • ca7d442692 serial-dmm/uni-t-dmm: Add UNI-T UT804 DMM definitions Elen Eisendle 2020-02-08 21:24:23 +0100
  • 35037b1d8b input/trace32_ad: Fix pod_data uninitialised warning Andreas Sandberg 2020-02-24 23:03:25 +0000
  • 5ff772410b gwinstek-gpd: Fix use of uninitialized variable Andreas Sandberg 2020-03-25 09:16:31 +0000
  • 5652085a4e bindings/cxx: Include missing header file Juan M. Bello-Rivas 2020-03-29 19:27:24 -0700
  • 49d130200d bindings/ruby: Disable Ruby bindings until we have a fix for #1526. Uwe Hermann 2020-04-04 22:14:48 +0200
  • c9901879f6 configure.ac: Also check for "swig4.0". Uwe Hermann 2020-04-04 22:00:17 +0200
  • e803574173 bindings/java: Fix build issue with SWIG 4.x. Uwe Hermann 2020-04-04 21:54:13 +0200
  • 6762401d2b Doxygen: Fix various warnings. Uwe Hermann 2020-03-25 20:11:06 +0100
  • 82b9f3d116 Doxygen: Properly mark a few symbols as private. Uwe Hermann 2020-03-24 20:09:02 +0100
  • deaaebb28d bindings/python/Doxyfile: Set OPTIMIZE_OUTPUT_JAVA to NO. Uwe Hermann 2020-03-24 22:38:21 +0100
  • b4066aa80e Doxyfile_internal: Fix various settings and paths. Uwe Hermann 2020-03-24 19:42:29 +0100
  • 4e9e767be0 Doxyfile: Predefine HAVE_SERIAL_COMM for serial docs. Uwe Hermann 2020-03-25 19:37:23 +0100
  • b07a07fec2 Doxyfile: Fix/update path and file references. Uwe Hermann 2020-03-24 19:31:26 +0100
  • 2faa1db033 Doxyfile: Bring back the workaround for bug #1422. Uwe Hermann 2020-03-24 20:17:31 +0100
  • e2bd01f4a7 All Doxyfile files: Update file template to doxygen 1.8.16. Uwe Hermann 2020-03-22 15:15:09 +0100
  • d7357ebbb6 All Doxyfile files: Set CREATE_SUBDIRS to NO. Uwe Hermann 2020-03-22 15:11:52 +0100
  • 20680f58ff manson-hcs-3xxx: Support device IDs with and without "HCS-" prefix. Uwe Hermann 2020-03-24 21:07:08 +0100
  • bfa79fbdb6 asix-sigma: Drop duplicate error message prefixes. Uwe Hermann 2020-03-24 19:22:11 +0100
  • 440810958c asix-sigma: move DRAM line buffer allocation closer to its use Daniel Trnka 2020-03-12 12:08:35 +0100
  • f73b00b647 asix-sigma: check for successful register access in sample download Daniel Trnka 2020-03-12 12:08:35 +0100
  • f5c863e572 korad-kaxxxxp: Fix max. possible current for all devices. Uwe Hermann 2020-03-22 16:58:54 +0100
  • 7415217ede korad-kaxxxxp: Add a new ID for KORAD KA3005P V4.2 power supply David Sastre Medina 2020-03-21 15:22:28 +0100
  • c4a46475a6 rigol-ds: Rigol DS1152E-EDU support fix jirjirjir 2020-01-17 16:28:55 +0300
  • 781ae4484d Fix #1509 by providing alternate sample format scales Soeren Apel 2020-02-28 22:49:57 +0100
  • 8491cf7cad python: Apply typemap for VariantBase to VariantContainerBase. Martin Ling 2020-01-05 18:25:13 +0000
  • f0362f595a agilent-dmm: Add Agilent U1237AX (completely untested). Uwe Hermann 2019-12-27 21:22:18 +0100
  • e47e23355f agilent-dmm: U127x: Fix mode switch event handling. Uwe Hermann 2019-12-27 20:59:04 +0100
  • a6b07d7e28 Bump package version to 0.5.2. libsigrok-0.5.2 Uwe Hermann 2019-12-24 16:29:32 +0100
  • c66fde84f6 configure.ac: Bump libtool/library version from 5:0:1 to 5:1:1. Uwe Hermann 2019-12-24 16:29:18 +0100
  • c1a8e19d9a Doxyfile: Set version to 0.5.2. Uwe Hermann 2019-12-23 14:18:05 +0100
  • fdb297c6de NEWS: Add list of user-visible changes so far. Uwe Hermann 2019-12-23 14:15:01 +0100
  • e4204b1757 Backport recent changes from mainline. Uwe Hermann 2019-12-23 13:53:55 +0100
  • 4c660b46c1 Makefile.am: Add missing src/serial_hid.h. Uwe Hermann 2019-12-24 16:39:01 +0100
  • f0901a5050 src/serial_hid.h: Include guard consistency fix. Uwe Hermann 2019-12-24 16:38:56 +0100
  • 31b4a9a236 input/csv: Set default "header" option value to true. Uwe Hermann 2019-12-22 23:50:22 +0100
  • 5a27356705 output/csv: Set default "time" option value to false. Uwe Hermann 2019-12-22 23:49:08 +0100