Instead of keeping dominant speaker locally, get it from redux and be
updated when the dominant speaker changes. This is in an attempt to mimic
the video layout being reactified and connected to redux.
The visibility of the toolbar can be toggled by interacting with the main screen.
This change allows the toolbar to be configured to be 'always visible'. This voids
the 'toggle' functionality.
Simplify parts of the logic introduced in
11b7144ad0.
Specificaly, using all the state change avoiding functions doesn't give us much
since we need to copy the state for sure.
Makes sure that whenever a conference is left or switched, the local
participant's id will be equal to the default value.
The problem fixed by this commit is a situation where the local
participant may end up sharing the same ID with it's "ghost" when
rejoining a disconnected conference. The most important and easiest to
hit case is when the conference is left after the CONFERENCE_FAILED
event.
Another rare and harder to encounter in the real world issue is
where CONFERENCE_LEFT may come with the delay due to it's asynchronous
nature. The step by step scenario is as follows: trying to leave a
conference, but the network is not doing well, so it takes time,
requests are timing out. After getting back to the welcome page the
the CONFERENCE_LEFT has not arrived yet. The same conference is joined
again and the load config may timeout, but it will be read from the
cache. Now the network gets better and conference is joining which
results in our ghost participant added to the redux state. At this point
there's the root issue: two participants with the same id, because the
local one was neither cleared nor set to the new one yet
(PARTICIPANT_JOINED come, before CONFERENCE_JOINED where we adjust the
id). Then comes CONFERENCE_JOINED and we try to update our local id.
We're updating the ID of both ghost and local participant. It could be
also that the delayed CONFERENCE_LEFT comes for the old conference, but
it's too late and it would update the id for both participants.
The approach here reasons that the ID of the local participant
may be reset as soon as the local participant and, respectively, her ID
is no longer involved in a recoverable JitsiConference of interest to
the user and, consequently, the app.
Co-authored-by: Pawel Domas <pawel.domas@jitsi.org>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
If the ID of a remote participant was the same as the ID of the local
participant (across multiple conferences), removing the remote
participant on PARTICIPANT_LEFT would remove the local participant.
Like the preceding commit "ref(base/conference): clear the 'conference'
field on WILL_LEAVE", this commit is part of the story how we are to
deal with conferences which take noticeable time to leave.
Like the preceding commit "ref(base/conference): clear the 'conference'
field on WILL_LEAVE", this commit is part of the story how we are to
deal with conferences which take noticeable time to leave.
If a leave is delayed and the leaving JitsiConference manages to sneak a
PARTICIPANT_JOINED in, it may create a remote participant who even
collides with the local participant.
With so many abstractions called conference, I'm not surprised I made a
mistake and my reviewer didn't catch it.
As we are transitioning from remote participants identified by ID alone
to an ID-conference pair, the subsequent commits "Protect against late
PARTICIPANT_JOINED" and "Refine PARTICIPANT_LEFT for ID collisions"
caught the error.
Pawel Domas said:
The conference state field is referring to the current conference in
progress, so it feels like this field should be cleared as soon as we
declare that the conference is being left and the asynchronous process
of leaving the conference starts (which happens on
CONFERENCE_WILL_LEAVE).
Lyubo Marinov said:
Merely setting conference to undefined is incomplete because there are
other redux state properties associated with conference.
What we're doing here is redefining the redux action
CONFERENCE_WILL_LEAVE:
The redux action CONFERENCE_WILL_LEAVE represents the order of the user
to leave a JitsiConference instance. From the user's perspective, there's
no going back (with respect to the instance itself). The app will perform
due clean-up like leaving the associated room, but the instance is no
longer the focus of the attention of the user and, consequently, the app.
Now CONFERENCE_LEFT and CONFERENCE_WILL_LEAVE have more in common than
before and we can do a much better job by expressing the common parts in
source code. Additionally, our source code can be rewritten to better
express the meaning of any of these two actions.
Co-authored-by: Pawel Domas <pawel.domas@jitsi.org>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
Add ability to provide a display name in the configOverwrite object that
when available it will be used to customize the name of the meeting in
callkit screen and recent call list.
Co-authored-by: Daniel Ornelas <daniel.ob64@gmail.com>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
This zOrder change fixes the issue that the scrollable filmstrip videos
rendered in front of the local participant, however there is still an
issue that needs to be fixed later: The rendered videos should have
overflow: 'hidden' property applied so then they don't get rendered when
scrolled out of the ScrollView, that property however doesn't seem to
work for Video components.
This fix is based on storing the location URL object we are loading the
configuration for in the redux store. Once the config has been loaded (or it has
failed, for that matter!) we'll check if the current "config URL" is the same we
set, and discard the old one if they don't match.
With some of the preceding commits in the "multiplying remote
thumbnails" story line, I started hitting this error with 100%
reproducibility:
1. Have a remote participant prepared in conferenceA. Web will do as
well.
2. On iOS prepare to join conferenceB in Safari and use the same device
for step 3.
3. Join conferenceA on the iOS device from step 2 with audio-only. The
audio-only is so that avatars are always visible. Wait for the remote
participant prepared in step 1 to appear.
4. Switch to Safari and hit "Continue in the app" to have the app leave
conferenceA and join conferenceB.
What happens:
After the iOS device joins conferenceB in the Jitsi Meet app, the local
participant is on the large video (as expected) but the avatar of the
local participant is the default audo-generated auto-colored
placeholder. That's because this error was hit and the avatar couldn't
be "fetched".
The Jitsi Meet app always has at most 1 conference of primary interest.
It may have to juggle with 2 JitsiConference instances at the same time
if 1 is in the process of being left and one is joining/joined. But the
one which is joining or joined (which we call conference in the
features/base/conference redux state) is the one "of interest", the
other one is "clean up". Consequently, the remote participants of the
conference "of interest" are the remote participants "of interest" and
the others are "clean up". In order to reduce the time during which
there may be multiplying remote thumbnails, clean the remote
participants who are no longer "of interest" up.
As part of the work on fixing the problem with the multiplying
thumbnails, we've associated remote participant w/ JitsiConference.
However, there are periods of time when multiple JitsiConferences are in
the redux state (and that period is going to be shorted by
StateListenerRegistry). In order to give more control to the feature
base/participants, reduce the occurrences of direct access to the
features/base/participants redux state and utilize the feature's
existing read access functions. Which will allow us in the future to
enhance these functions to access participants which are relevant to the
current conference of interest to the user only.
The commit message of "Associate remote participant w/ JitsiConference
(_JOINED)" explains the motivation for this commit.
Practically, _JOINED and _LEFT combined with "Remove remote participants
who are no longer of interest" should alleviate the problem with
multiplying remote participants to an acceptable level of annoyance.
Technically though, a remote participant cannot be identified by an ID
only. The ID is (somewhat) "unique" in the context of a single
JitsiConference instance. So in order to not have to scratch our heads
over an obscure corner, racing case, it's better to always identify
remote participants by the pair id-conference. Unfortunately, that's a
bit of a high order given the existing source code. So I've implemented
the cases which are the easiest so that new source code written with
participantUpdated is more likely to identify a remote participant with
the pair id-conference.
Additionally, the commit "Reduce direct read access to the
features/base/participants redux state" brings more control back to the
functions of the feature base/participants so that one day we can (if we
choose to) do something like, for example:
If getParticipants is called with a conference, it returns the
participants from features/base/participants who are associated with the
specified conference. If no conference is specified in the function
call, then default to the conference which is the primary focus of the
app at the time of the function call. Added to the above, this should
allow us to further reduce the cases in which we're identifying remote
participants by id only and get us even closer to a more "predictable"
behavior in corner, racing cases.
The plan set in motion here is to associate remote participants with the
JitsiConference instances that created them in order to be able to
remove remote participants when a JitsiConference is no longer the
primary focus of the jitsi-meet app. And that's supposed to alleviate a
problem with multiplying remote thumbnails.
Doing all of the above in a single commit is a bit of a high order. So
I'm splitting the whole into multiple successive commits for the
purposes of observability, comprehension. Each commit is supposed to be
safe even if subsequent commits are not accepted, are reverted,
whatever. Obviously, without the successive commits, a commit may be
"unused".
One of the important pieces of the multiplying remote thumbnails "fix"
offered is removing remote participants who are no longer of interest
i.e. PARTICIPANT_LEFT. But in order for _LEFT to be implemented, _JOINED
must be implemented first.
Because a conference can fail before or after it's joined it must be
"left" in order to release any allocated resources like peerconnections,
tracks and all the other things.
- add 10px of padding on the sizes of the toolbar
- make the button margin smaller (from 10 to 7)
- increate the secondary button factor to 85%, thus rising the maximum secondary
button size to 50 (from the previous 48)
Doing so in CONFERENCE_JOINED is too late because if we are moderators that
event will come first and we won't know what ID to match it with.
This is safe because our local ID is created early.
* feat(recording): frontend logic can support live streaming and recording
Instead of either live streaming or recording, now both can live together. The
changes to facilitate such include the following:
- Killing the state storing in Recording.js. Instead state is stored in the lib
and updated in redux for labels to display the necessary state updates.
- Creating a new container, Labels, for recording labels. Previously labels were
manually created and positioned. The container can create a reasonable number
of labels and only the container itself needs to be positioned with CSS. The
VideoQualityLabel has been shoved into the container as well because it moves
along with the recording labels.
- The action for updating recording state has been modified to enable updating
an array of recording sessions to support having multiple sessions.
- Confirmation dialogs for stopping and starting a file recording session have
been created, as they previously were jquery modals opened by Recording.js.
- Toolbox.web displays live streaming and recording buttons based on
configuration instead of recording availability.
- VideoQualityLabel and RecordingLabel have been simplified to remove any
positioning logic, as the Labels container handles such.
- Previous recording state update logic has been moved into the RecordingLabel
component. Each RecordingLabel is in charge of displaying state for a
recording session. The display UX has been left alone.
- Sipgw availability is no longer broadcast so remove logic depending on its
state. Some moving around of code was necessary to get around linting errors
about the existing code being too deeply nested (even though I didn't touch
it).
* work around lib-jitsi-meet circular dependency issues
* refactor labels to use html base
* pass in translation keys to video quality label
* add video quality classnames for torture tests
* break up, rearrange recorder session update listener
* add comment about disabling startup resize animation
* rename session to sessionData
* chore(deps): update to latest lib for recording changes
Contributing all buttons in one place goes against the designs that we
set out at the beginning of the project's rewrite and that multiple of
us have been following since then.
Currently the following are implemented:
- AudioMuteButton
- HangupButton
- VideoMuteButton
In order to implement these new buttons a new abstract class was introduced,
which abstracts the ToolboxItem into a button with enough hooks so a stateful
and a stateless version of it can be created.
This patch only adds the stateful implementation of the aforementioned buttons.
This abstraction represents an action which can go anywhere in a toolbox (be
that the main toolbar or the overflow menu) and it's platform independent.
It does not depend on Redux, thus making it stateless, which facilitates its use
in stateful button implementations as well as stateless ones.
Knowledge is power, man!
The config.js cache predates the feature base/known-domains.
Technically, it's also able to recall more domains that the feature
recent-list can (because the latter limits its entries).
Knowledge is power, man!
We moved "knownDomains" from calendar-sync to base/known-domains.
However, we do have an official release in the app stores and I'd like
us to not throw away the knowledge it has acquired.
If multiple JitsiMeetView instances are created (not necessarily
existing at once), it's possible to hit a TypeError when reading the
React Component props of the currently mounted App. Anyway, in certain
places we're already protecting against that out of abundance of caution
so it makes no sense to not protect everywhere.
Make it more generic by accepting any content except of just rows with text and
icons.
In addition, rework its structure so the animation is smoother, by putting the
background overlay outside of the Modal. This way, the animation doesn't affect
the background, which won't slide down.
* fix(toolbar): make button hover bigger
* fix(toolbar): make hangup button bigger
* fix(always-on-top): make toolbar and buttons same sizes as main toolbar
* fix(toolbar): change some tooltips
* fix(toolbar): adjust side panel and filmstrip for new toolbar sizes
It seems that the external API will not send any event to let the sdk
consumer know that the conference has failed if the problem occurs at
the establishing of XMPP connection stage. That's because the config was
loaded successfully, but the conference instance does not exist yet, so
neither base/config nor base/conference will emit any failure.
Make the external API emit CONFERENCE_WILL_JOIN early on SET_ROOM action
which occurs before the XMPP connection is created. At this point we
know that config has loaded and if there's a valid conference room to
be joined. We were thinking of doing that even on CONFIG_WILL_LOAD,
but that seemed to be to risky at this point.
With this the RN component and the consumer app can share same CallKit
provider, configuration, and enable to be part of multiple listeners of
the CallKit flow events. The main driver of this is to enable the
consumer app to be able to report an incoming call to the OS before
loading the JitsiMeetView. Once the user answers the call, the app can
instantiate a JitsiMeetView, pass the CallKit call UUIID, and the Jitsi
Meet components will handle the connection and report back to CallKit
that the call has been established.
Hristo Terezov, Chris Cordle, and I/Lyubomir Marinov agreed that we'd
try to use "invite" & "invitee(s)" in Web/React's iframe API,
mobile/react-native's SDK invite API, and internally for the purposes of
consistency, ease of understanding, etc.
This can happen if there are multiple JitsiMeetView instances are active at the
same time, because there is a single bridge, which means all of them would get
the events.
Currently enterPictureInPicture action can only be dispatched when
the app is on the conference view and the enter PiP button is displayed,
so no check should be necessary.
Activity.enterPictureInPictureMode method must be invoked synchronously
on userLeaveHint callback in order to be sure that the current Activity
is still visible (does not transit to PAUSED state). Previously if the
asynchronous processing would be delayed enough for the Activity to go
into the PAUSED state it will be too late to go into the PiP mode.
To reduce the amount of motion that has to be blurred, use a canvas
to essentially set the FPS of the video background. This canvas
component is behind a temporary feature flag, as well as being able
to disable the blur, so it can be played around with on deployed
environments.
- Update font files to add new icon.
- Update markup and style so the icon has a small background
to fill in the text of the icon.
- Remove some css transitions that don't seem to do much.
In order to be able to add analytics to the deep-linking pages the
lib-jitsi-meet initialization has been moved so it happens earlier.
The introduced `initPromise` will eventually disappear, once conference is
migrated into React and / or support for Temasys is dropped. At that stage, it
can be turned into a sync function which all platforms share.
* Button conditionally shown based on if the feature is enabled and available
* Hooks for launching the invite UI (delegates to the native layer)
* Hooks for using the search and dial out checks from the native layer (calls back into JS)
* Hooks for handling sending invites and passing any failures back to the native layer
* Android and iOS handling for those hooks
Author: Ryan Peck <rpeck@atlassian.com>
Author: Eric Brynsvold <ebrynsvold@atlassian.com>
* Adds in memory log storage, to be used while testing.
Enabling it only when config.debug is set, a configuration provided by jitsi-meet-torture.
* Moves to using config.testing.testMode property for logs storage.
* Fixes comments.
Activity.enterPictureInPictureMode can fail for a couple of reasons
mentioned in the JSDoc:
"The system may disallow entering picture-in-picture in various cases,
including when the activity is not visible, if the screen is locked or
if the user has an activity pinned."
It seems to be safe to assume that those cases will be caught by
a RuntimeException handler (only RuntimeExceptions can be left without
explicit catch block).
Anyway the root cause for problems is the fact that the current process
for going to the picture in picture mode is not synchronised with
Activity's lifecycle. On Activity's "userLeaveHint" callback we dispatch
async task to the JS code which only then after dispatching some more
stuff eventually call native method that enter PiP. In case we spend too
much time on the JS side and the Activity goes to PAUSED state the call
will fail with IllegalStatException: "activity is not visible",
"activity is paused" etc. This means with this fix the app will not
crash, but we'll see it sometimes not go to the PiP mode as expected.
* feat(recording): show the YouTube live stream URL
- From the start live stream dialog, push up the broadcast ID
of the chosen broadcast. It is assumed the ID can be used to
create the YouTube link.
- Listen for lib-jitsi-meet to emit updates of the known live
stream URL, shove it into redux, and have InfoDialog display
it.
* ref(info): pass in dial in and live stream url
Passing these values in should trigger AtlasKit InlineDialog
to re-render and reposition itself.
* ref(info): use conference existence as trigger for autoshowing dialog
* feat(info): add live stream link to invite copy
* Revert "ref(info): use conference existence as trigger for autoshowing dialog"
This reverts commit 1072102267.
* hidden -> url
* _onClickHiddenURL -> _onClickURLText
Since the main conference container is no longer "clickable" there must
be a way for clicking on the "large video". A clickable TestHint nested
in ParticipantView makes it easier for dealing with the fact that the
click handler is not always on the same component (required for the
pinch and zoom feature to work correctly).
Allows to bind a click handler to a TestHint.
When a mobile test wants to click an UI element it must be able to
locate it through the accessibility layer. Now the problem with that is
that there is currently no uniform way for finding element on both iOS
and Android. This problem is solved by TestHint component which takes
an id parameter which then can be specified in the corresponding java
TestHint class in jitsi-meet-torture to easily find it. By being able to
add a click handler to a TestHint, it's possible to duplicate original
handler under nested TestHint and then find it easily on the torture
side.
Adds the logic to render TestHint only when the test mode is enabled
in order to be able to put independent TestHints in other places than
the TestConnectionInfo component.
Be explciit about the appearance we desire, since each mounted StaturBar
component will override the existing values. In this case, the problem was
caused because the default on iOS is dark, whereas it's light on Android.
Set it to light so it works consistently across both, which is what we want.
It's too sensitive and most of the time I cannot perform an onPress. In
contrast, the builtin/default/standard onPress is noticeably more
forgiving. While we fix the sensitivity of "pinch to zoom", don't use
its onPress unless absolutely necessary i.e. use it only for desktop
streams.
Zoltan Bettenbuk suggested the following:
const state = getState();
if (desiredTypes.length === 0) {
- const { audio, video } = state['features/base/media'];
-
- audio.muted || desiredTypes.push(MEDIA_TYPE.AUDIO);
- video.muted || desiredTypes.push(MEDIA_TYPE.VIDEO);
+ const startAudioOnly = getPropertyValue(state, 'startAudioOnly');
+ const startWithAudioMuted
+ = getPropertyValue(state, 'startWithAudioMuted');
+ const startWithVideoMuted
+ = getPropertyValue(state, 'startWithVideoMuted');
+
+ if (!startWithAudioMuted) {
+ desiredTypes.push(MEDIA_TYPE.AUDIO);
+ }
+ if (!startAudioOnly && !startWithVideoMuted) {
+ desiredTypes.push(MEDIA_TYPE.VIDEO);
+ }
}
const availableTypes
The final commit is really a different implementation of the same idea
but takes into account that the state of base/media already contains the
intent of the URL and notices the delay in the realization of the
background app state.
Additionally, unbreaks one more case where setAudioOnly is incorrectly
dispatched on CONFERENCE_LEFT or CONFERENCE_FAILED and, consequently,
overrides the intent of the URL.
* feat(Deeplinking): Implement for web.
* ref(unsupported_browser): Move the mobile version to deeplinking feature
* feat(deeplinking_mobile): Redesign.
* fix(deeplinking): Use interface.NATIVE_APP_NAME.
* feat(dial_in_summary): Add the PIN to the number link.
* fix(deep_linking): Handle use case when there isn't deep linking image.
* fix(deep_linking): css
* fix(deep_linking): deeplink -> "deep linking"
* fix(deeplinking_css): Remove position: fixed
* docs(deeplinking): Add comment for the openWebApp action.
* fix(recording): fetch events also for available broadcasts
Only "persistent" broadcasts were being fetched using the
YouTube API. Fetching "all" will get persistent broadcasts
and events. If events use a custom encoder then the stream
key can be obtained. If google hangouts is used for the event
then a stream key will not be obtainable; in those cases
input empty string as the stream key.
* squash: fix typos, reword comments, use object for preventing duplicate broadcasts
The feature was not ported to the new toolbar. Arguable these
can all be moved into notification but for now simply the
logic will be removed and worked on again as demand arised.
Adds TestConnectionInfo component which exposes some internal app state
to the jitsi-meet-torture through the UI accessibility layer. This
component will render only if config.testing.testMode is set to true.
Moves the statsEmitter.start() invocation to the middleware of
the connection-indicator feature, so that it's started for both mobile
and web (now mobile needs RTP stats for the tests).
On Android the files will be copied to the assets/sounds directory of
the SDK bundle on build time. To play the "asset:/" prefix has to be
used to locate the files correctly.
On iOS each sound file must be added to the SDK's Xcode project in order
to be bundled correctly. To playback we need to know the path of the SDK
bundle which is now exposed by the AppInfo iOS module.
TouchableWithoutFeedback and TouchableHighlight interfere with the
implementation of 'pinch to zoom' to come. We prepare for it by driving
the onClick/onPress handler(s) out of Conference, through LargeVideo and
ParticipantView into Video itself where the bulk of 'pinch to zoom' will
be implemented.
In preparation for "pinch to zoom" support in desktop streams on mobile, make
certain Views not intervene in touch event handling. While the modification is
necessary for "pinch to zoom" which is coming later, it really makes sense for
the modified Views to not be involved in touching because they're used to aid
layout and/or animations and are to behave to the user as if they're not there.
Adds Nat64InfoModule which resolves IPv6 addresses for IPv4 addresses
in IPv6 only network where jitsi-meet deployment does not provide any
IPv6 addresses as ICE candidates.
Being kicked out of the conference will result with a conference failed
event with 'conference.kicked' reason and take the user back to
the welcome page by navigating to 'undefined'.
I don't understand the old showDesktopSharingButton action
but I've tried my best to copy it over. There is an existing
issue where the keyboard shortcut gets registered when it
probably shouldn't because screensharing is disabled. It will
be fixed soon with refactoring of the entire logic determining
whether or not to show the screensharing button.
The onPresence parsing was refactored to remove use of jQuery.
This exposed three methods not available in react-native:
ParentNode.children, ChildNode.remove, and
document.querySelectorAll. The querySelectorAll change could
be swapped for the already polyfilled querySelector, but
children and remove had to be added. The polyfills are based
on those supplied by MDN web docs, but modified to pass jitsi
linting.
* fix(invite): do not send empty queries for people search
The endpoint might return an error if an empty query is sent.
* fix(invite): add error logging for failed people directory requests
The error currently being passed through from $.getJSON ended up
being an empty string plus was not getting logged. So switch to
fetch to move along with jquery killing and log the error.
* fix(dial-in): add error logging for failed requests
* ref(invite): create a fetch helper to remove duplicate logic
* feat(invite): add basic analytics for AddPeople dialog
Analytics for opening the dialog, closing the dialog, the
count of invites sent, and the count of invites errored.
* squash: fix typo, change default count init, remove extra analytics param
* feat(recording): use google api to get stream key
* squash: renaming pass
* squash: return full load promise
* sqush: use google api state enum
* squash: workaround for lib not loading
* another new design...
* increase timeout workaround for gapi load issue
* styling pass
* tweak copy
* squash: auto select first broadcast
Moves the things around to be able to override the config with the URL
params specified in the hash part of the location URI to which the app
is navigating to.
Adds base/sounds feature which allows other features to register a sound
source under specified id. A new SoundsCollection component will then
render corresponding HTMLAudioElement for each such sound. Once "setRef"
callback is called by the HTMLAudioElement, this element will be added
to the Redux store. When that happens sound can be played through the
new 'playSound' action which will call play() method on the stored
HTMLAudioElement instance.
Pre-existing logic made it so numbers were assumed as valid
if no validation url was specified. To be consistent with
the validation server, the faked number should include a
+ at the beginning.
* feat(invite): be able to call numbers from the invite dialog
The major changes:
- Remove DialOutDialog, its views, redux hooks, css, and images.
Its main functionality has been moved into AddPeopleDialog.
- Modify the AppPeopleDialog styling a bit so it is wider.
- Add phone numbers to AddPeopleDialog search results. Phone
numbers are validated in parallel with the request for people
and then appended to the result. The validation includes
an ajax to validate the number is recognized as dialable by
the server. The trigger for the validation is essentially if
the entered input is numbers only.
- AddPeopleDialog holds onto the full object representation of
an item selected in MultiSelectAutocomplete. This is so
selected items can be removed on successful invite, leaving
only unsuccessful items.
- More granular error handling on invite so individual invitees
can be removed from the selected items list.
* squash: change load state, new regex for numbers
* squash: change strings, auto prepend 1 if no country code, add reminders
* deps: update jquery version
* squash: resize thumbnails after appending shared thumb
This forces jquery animate to show the thumbnail somehow...
Remote thumbnails basically work this way (append to filmstrip
and then resize filmstrip thumbnails) so I just copied that
implementation. ... So I admit I lost this fight because
even after looking at jquery I couldn't understand why
it doesn't work on the first resize but does on the second.
Plus I'm being put on a strict timebox to update jquery.
* squash: getJSON no longer supports .success
The difference from this change and 88325ae is there is no
attempt to do this in redux. This is the safer change in that
the cleanup logic is known only to trigger on hangup.
This reverts commit 88325aeef2.
Turns out a conference with a password triggers a failed conference
join. It's going to be tricky to decipher when to do actual
cleanup, and where to shove that code, so reverting is easier for
now.
Recent changes in lib-jitsi-meet probably led to (1) our
RTCPeerConnection customizations on react-native not being used which is
a problem because we need them for at least NAT64 on iOS in order to
pass the review in Apple's App Store and (2) unexpected exceptions
inside react-native-webrtc.
The Promise-based WebRTC API should be merged from react-native-webrtc's
upstream but I don't want to do it right now because last time we got
multiple bugs in addition.
Destroy local tracks and also destroy large video so the
user does not wonder why camera (and mic) are still enabled
even though hangup has been pressed.
This only works automatically on Android >= 8. On other platforms / versions, it
relies on the SDK user on implementing a "reduced UI" mode and reacting to the
"request PIP" delegate method.
- Move the existing components for the static dial in page into
a separate folder for easier reuse.
- Reuse those components for displaying dial-on numbers on the
mobile page for unsupported browsers.
- Modify those components to support having tel protocol
links on the dial-in numbers.
- Have DialInSummary, formerly DialInInfoPage, respect a
passed in className prop for easier styling differences.
* ref(invite): remove InviteDialog
InviteDialog functionality has been moved into InfoDialog.
The InviteButton has been temporarily hacked to show one
of its dropdown options instead as the button. Future
work will bring in a redesigned InviteModal that the button
will open.
* squash: filter invalid options and map valid options
* squash: update strings
On Android we go into "immersive mode" when in a conference, this is our way of
being full-creen. There are occasions, however, in which Android takes us out of
immerfive mode without us (the application / SDK) knowing: when a child activity
is started, a modal window shown, etc.
In order to be resilient to any possible change in the immersive mode, register
a listener which will be called when Android changes it, so we can re-eavluate
if we need it and thus re-enable it.
* feat(info): new dialog design
- Add display of a dial in number.
- Add a static page to show a full list of dial in numbers.
- Add password management.
- Invite modal will be changed soon to remove password and
dial-in.
* squash: add classes for torture tests
* squash: class for local lock for torture tests
* squash: more classes for torture tests
* squash: more classes, work around linter
* squash: remove unused string?
* squash: work around linter and avoid react warnings
* squash: pixel push, add bold
* squash: font size bump
* squash: NumbersTable -> NumbersList
* squash: document response from fetching numbers
* squash: showEdit -> editEnabled, pixel push padding for alignment
* squash: pin -> conferenceID
* squash: prepare to receive defaultCountry from api
When in PiP mode the LargeView will not be large enough to hold the avatar (for
those interested in the details, our avatar's size is 200, and in PiP mode the
app is resized to about 150).
In order to solve it, this PR refactors how the avatar style is passed along,
reducing it to a single "size" prop. With this only prop, the Avatar compononent
will compute the width, height and borderRadius, plus deal with some Android
shenanigans.
In addition, the LargeView component now uses DimensionsDetector to check its
own size and adjust the size prop passed to the Avatar component as needed.
* ref(large-video): reactify background
This is pre-requisite work for disabling the background on
certain browsers, namely Firefox. By moving the component
to react, and in general encapsulating background logic,
selectively disabling the background will be easier.
The component was left for LargeVideo to update so it can
continue to coordinate update timing with the actual large
video display. If the background were moved completely into
react and redux with LargeVideo, then background updates would
occur before large video updates causing visual jank.
* fix(large-video): do not show background for Firefox and temasys
Firefox has performance issues with adding filter effects on
animated elements. On temasys, the background videos weren't
really displaying anyway.
* some props refactoring
Instead of passing in classes to LargeVideoBackground, rely on
explicit props. At some point LargeVideo will have to be reactified
and the relationsihp between it and LargeVideoBackground might
change, so for now make use of props to be explicit about
how LargeVideoBackground can be modified.
Also, set the jitsiTrack to display on LargeVideoBackground to
null if the background is not displayed. This was an existing
optimization, although previously done with pausing and playing.
* squash: use newly exposed RTCBrowserType
* squash: rebase and use new lib browser util
* squash: move hiding logic all into LargeVideo
* squash: remove hiding of background on stream change. hopefully doesnt break anything
Passing around of the component was used when there were two
independent Notification components. Now that there is only
one Notification component, it is not necessary to pass
around the component.
This is only implemented for mobile at the moment, since web doesn't handle
visibility within the Filmstrip component yet, so this should be added right
then, too.
* Handles connection failed event details (passing them to analytics).
* Fixing comments.
* Updates depending versions to be able to test.
* Fixing comments.
* Fixes wrong jsdoc.
We started on the way to responsive UI and its design with aspect ratio
and keeping the filmstrip on the short side of the app's visible
rectangle.
Shortly, we're going to introduce reduced UI for Picture-in-Picture. And
that's where we'll need another dimensions-based detector akin to the
aspect ratio detector.
While the AspectRatioDetector, the up-and-coming ReducedUIDetector, and
their base DimensionsDetector are definitely separate abstractions and
implementations not mixed for the purposes of easy extensibility and
maintenance, the three of them are our building blocks on top of which
we'll build our responsive UI.
Turns out this was a bit more involved than I originally thought due to an
interesting (corner) case: IFF the user was never asked about microphone
permissions and the call starts with audio muted, unmuting from the CallKit
interface won't work (iOS won't show the prompt, it fails immediately) and we
need to sync the mute state back.
If the view gets resized to a 1:1 aspect ratio, remember the previous mode to
avoid flickering when going back to a larger size or different aspect ratio.
If config.enableUserRolesBasedOnToken is true, only let moderators
and non-guests modify the password. Otherwise, only let moderators
edit the password.
Spot will need a way to submit call feedback using the iframe
api. For now expose a method on conference.js to submit that
feedback. Exposing on conference.js looks to be the existing
pattern... Also add an event to notify consumers of the iframe
api that feedback was submitted, as postMessage is async
and the notification can at least give some guarantee maybe.
I haven't updated documentation yet as I'm not confident
about this api.
Improve the experience when joining a room by removing the need to tap the join
button. The keyboard type has also been set to "go", which translated on the
builtin keyboard button label to be "go" (it's builtin, the operating system
translates it). This works on both Android and iOS.
Android uses a SurfaceView to render video, which is not quite a View, so the
fade-in animation (which varies the opacity) doesn't work.
Instead, add an opaque black view covering the video, which transitions to
transparent. This creates much smoother transitions on Android, while behaving
the same.
In addition, I removed the flip animation for local tracks, which is no longer
used, since the camera is switched without changing tracks.
* ref: Restructures the pinned/unpinned events.
* ref: Refactors the "audio only disabled" event.
* ref: Refactors the "stream switch delay" event.
* ref: Refactors the "select participant failed" event.
* ref: Refactors the "initially muted" events.
* ref: Refactors the screen sharing started/stopped events.
* ref: Restructures the "device list changed" events.
* ref: Restructures the "shared video" events.
* ref: Restructures the "start muted" events.
* ref: Restructures the "start audio only" event.
* ref: Restructures the "sync track state" event.
* ref: Restructures the "callkit" events.
* ref: Restructures the "replace track".
* ref: Restructures keyboard shortcuts events.
* ref: Restructures most of the toolbar events.
* ref: Refactors the API events.
* ref: Restructures the video quality, profile button and invite dialog events.
* ref: Refactors the "device changed" events.
* ref: Refactors the page reload event.
* ref: Removes an unused function.
* ref: Removes a method which is needlessly exposed under a different name.
* ref: Refactors the events from the remote video menu.
* ref: Refactors the events from the profile pane.
* ref: Restructures the recording-related events.
Removes events fired when recording with something other than jibri
(which isn't currently supported anyway).
* ref: Cleans up AnalyticsEvents.js.
* ref: Removes an unused function and adds documentation.
* feat: Adds events for all API calls.
* fix: Addresses feedback.
* fix: Brings back mistakenly removed code.
* fix: Simplifies code and fixes a bug in toggleFilmstrip
when the 'visible' parameter is defined.
* feat: Removes the resolution change application log.
* ref: Uses consistent naming for events' attributes.
Uses "_" as a separator instead of camel case or ".".
* ref: Don't add the user agent and conference name
as permanent properties. The library does this on its own now.
* ref: Adapts the GA handler to changes in lib-jitsi-meet.
* ref: Removes unused fields from the analytics handler initializaiton.
* ref: Renames the google analytics file and add docs.
* fix: Fixes the push-to-talk events and logs.
* npm: Updates lib-jitsi-meet to 515374c8d383cb17df8ed76427e6f0fb5ea6ff1e.
* fix: Fixes a recently introduced bug in the google analytics handler.
* ref: Uses "value" instead of "delay" since this is friendlier to GA.
There is more avatar work coming down the line for mobile,
which should also affect web, assuming the same getAvatarURL
helper will be used. As such, instead of continuing to
support the initials service and tweaking UI, revert to
make way for the future avatar work.
This reverts commit 2ea5ad68a5.
The inline classes for the toolbars were re-arranged
to fix non-rounded corners in the always-on-top window's
toolbar. However, those classes were also used by the
torture tests as a way to find stable elements that will
not get blown away by a react re-render. So re-wrap the
buttons with a div that will not get blown away,
add back the inline classes to those divs, and change
the CSS to round the corners in the always-on-top
window's toolbar.
* ref(avatars): remove Avatar.js
- Rely on redux getting updated with new participant state
and any calls to getAvatarURL passing in the redux
participant state. This way the state within Avatar.js can
be removed.
- Clean up methods on UI.js. Because all state is in the
store, separate methods for updating the avatar aren't as
necessary. Instead centralize accessing of the avatar for
components outside of redux and centralize the call to
update avatars for non-react components.
- Controversial: cache a participant's avatarURL on the
participant state. Currently the participant's avatarURL
that is generated without jwt (which sets the avatarURL directly)
is not cached. Without cache, there can be many redundant
calls to APP.API.notifyAvatarChanged.
* Leverage middleware timing to diff avatars
One alternative implementation is to leverage middleware's
ability to intercept updates before and after redux has
upated and then compare avatarURLs.
* kill UI.getAvatarUrl
* profile button sets its own avatar url (solves update timing)
* remove calls to updating avatar outside of middleware
* update UI.js doc
* remove left over logic from initial implementation
* try to move local user fallback into selector func
* default to id 'local' in selector
The video will switch to the avatar and be tinted with gray. On the large view,
a text message indicating the user has connectivity issues will be shown.
They will be stored in redux and the PageReloadOverlay will be displayed.
Note that this commit also introduces a subtle (and yet important!) change:
the location URL is now always set, regardless of the configuration loading or
not. This is needed in order for the retry logic to pick it up.
On web Conference is pretty much all there is, but on mobile we have the welcome
page and the blank page. If we fail to load config.js, for example we will still
be in the welcome page *and* we want to show an error overlay.
* Removes unused config logic.
* Whitelists config options that can be overridden using the URL.
* Recorder login with credentials, not supported by externalconnect.
Jibri uses xmpp credentials to login, which is not supported by externalconnect, so we want to skip it till that is supported.
* Whitelist only config.js
* Extracts whitelisting in separate function.
The goal is to reduce usage on atlassian/aui. New components
have been created to display the settings panel. Language
selection will reach into i18n for state whereas moderator
options will keep state in redux.
Properly handle errors while connecting or joining a conference. Prior to this
patch, only errors on established conferences / connections were saved to the
redux store.
75bf7638b3 introduced this regression, state must
be assigned as an object, even though one would think it's automagically
initialized to an object. Oh well!
AtlasKit is not fully compatible with React 16. One problem
is PropTypes will not be defined on the React object. So,
add the prop-types shim to the popup bundle.
Do the selection in mapStateToProps so the container itself doesn't need to
receive all the props that each overlay needs.
Each overlay is responsible for fetching their own props and for providing a
"needsDisplay" static method wich will be called with the full redux state and
should return true if the overlay needs displaying.
Also eliminate duplicated state keeping: the connection and conference error
states can be fetched from their respective base features.
Initializing UI features, like keyboard shortcuts, by chaining
onto APP.conference.init is not safe because init can fail,
skipping the initializing of UI features. This can happen when
the room is locked and then a failure event is dispatched into
middleware. I couldn't find a place to properly chain onto
in the APP.conference.init promise chain, primarily due
to the flow continued within middleware, so instead I
leveraged an existing listener for CONFERENCE_JOINED.
* Adds initial documentation for sipgw jibri.
Also explains enabling the people search service and the request/response that are made around sipgw jibri service.
* Fixes add people dialog to invite users and rooms.
No invitation is sent when there is nobody to invite.
* Reuse some recording strings, by using arguments.
* Make sure web also dispatches CONFERENCE_WILL_JOIN.
* Introduces new feature videosipgw.
* Fixes lint errors.
* Renames methods to use people, chatRooms and videoRooms.
* Updates to latest lib-jitsi-meet (dc3397b18b).
It was decided along with the mute participant dialog reactification
that these types of warning messages should not be toggleable--that
they should simply always display because there is no undo action.
As such, the component NotificationWithToggle is no longer needed.
* fix(notifications): throttle and batch join notifications
Instead of directly calling to show a join notification,
go through a specific method. This method will queue
names for display while a throttled function pulls
the names and shows a notification.
* squash: remove unused translation key
* squash: use default display name
* squash: move into participant actions
Rearrange the ToolbarButtons in the secondary Toolbar in order to mostly
group the media-related ones such as the AudioRouteButton, the
switchCamera button, and the audio-only mode button.
Due to the difference in nature, the iOS and Android implementations are
completely different:
iOS: MPVolumeView is used, which allows us to place a button which will launch a
native route picker provided by iOS itself. This view is different depending on
the iOS version, with the iOS 11 version being more complete.
Android: A completely custom component is used, which displays a bottom sheet
with the device categories, not devices individually. This is akin to the sheet
in the builtin dialer.
It emulates Android's BottomSheet in pure JavaScript. It's implemented as
another Dialog, so it can be used instead of one.
The implementation only supports text options with an associated icon, and an
optional 'selected' marker.
While reviewing "[PREVIEW|RN]: Handle getUserMedia in progress" I
discovered JSDoc comments which could be improved. They are not
necessarily 100% related to the PR.
This commit adds extra actions/Redux state to be able to deal with
the GUM operation being in progress. There will be early local track
stub in the Redux state for any a local track for which GUM has been
called, but not completed yet.
Local track is considered valid only after TRACK_ADDED event when it
will have JitsiLocalTrack instance set.
* feat(keyboard-shortcuts): show help in a react dialog
- Move shortcut help dom declaration to a react component
- Let open/close logic be handled by AtlasKit Dialog
- Remove static html for help from index.html
- Consolidate keyboard shortcut css
* squash: use lozenge for key styling
* squash: use different iteration style
* squash: update package-lock for lozenge
* feat(audio-only): be able to lock a browser into capturing audio only
* squash: try to make string more clear about audio only support
* squash: final strings
With the introduction of wide and narrow layouts the margins of the
Filmstrip and the Toolbox became inconsistent. For example, the
Filmstrip's top in the wide layout was nearer to the top than the
secondary Toolbar.
Adds the ability to detect app area's aspect ratio on react-native
through the features/base/aspect-ratio.
Makes conference, filmstrip and toolbox react to the aspect ratio
changes and display filmstrip on the shorter side of the screen.
* ref(notifications): convert some dialogs to error or warning notifications
- Expand the configurability of the Notification component so warnings
and errors can be displayed.
- Allow Notification to take in arbitrary text for the body.
- Rename defaultTitleKey to titleKey for consistency with descriptionKey.
* ref(notifications): remove openReportDialog method
openReportDialog is a wrapper around showError that adds
a logger statement. It is being called in one place only
so remove the method and have that one place call logger.
* ref(notifications): UI.showTrackNotWorkingDialog takes a boolean
Change UI.showTrackNotWorkingDialog so it takes a boolean
arguments instead of the entire track. A small refactor so
the method needs to know less.
* [squash] Fixes eslint errors
* WiP: Fixes desktop sharing error strings and adds support button
* [squash] Fix icons appearances
* [squash] Fix translate titles and messages
* [squash] fix(translation): Fixes incorrect password string
* [squash] fix(recording): Fixes recording message
* [squash] fix(warning): Turns some warnings to errors and makes support link optional.
* [squash] fix(translation): Addressing language comments
* [squash] Fixes jsdoc and formatting
* [squash] fix(noopener): Fixes window.open noopener
* [squash] fix(constants): Extract constants and refactor NotificationWithToggle
* [squash] fix(lang): Fixes camera and mic error titles
* [squash] fix(supportLink): Renames addSupportLink to hideErrorSupportLink
Instead of targetting a div that contains multiple elements
and risking the elements appearing out of order, create a
specific div for local video to append to.
The intention of the code is (1) to return target if none of the setters lead
to an actual change, (2) to not modify target, and (3) to do it with a 1
copyOnWrite at most.
The lib will accept new style constraints and use those
to capture audio/video. By defining the constraints in
config, there is greater flexibility for defining
and changing constraints.
The popovers in filmstrip only are displaying thinly.
As a quick workaround, set a width on them. There
should only be one anyway, which shows up when
talking while muted.
Triggering the 'conference left' action when the wait for owner dialog
is dismissed will let the Call Kit implementation end the call, after
a recoverable conference failed event was emitted.
Also fixes conference state reduction when 'conference left' is emitted
by room lock or auth features where the conference has not been joined
yet.
The feature authentication affords recovery from CONFERENCE_FAILED
caused by AUTHENTICATION_REQUIRED. (Like the feature room-lock afforded
recovery from CONFERENCE_FAILED caused by PASSWORD_REQUIRED.)
Recently/as part of the work on taking into account the user defined by
JWT, the local participant (on mobile) started telling the remote
participants that he/she had the display name "me". Obviously, that's
incorrect. Do not store the default display name in redux. While it may
be argues that redux is the place for all states, base/participants and
the name property of Participant is not meant to be that display name
because that is being sent to remote participants, the default name
needs to be internationalized, etc. So it's better to not store the
default display name at this time at all because it's not used by mobile
anyway and Web already deals with remote participants who don't share
their display names.
Will override email, display name and avatar URL with the values
provided in 'context.user' structure of the JWT token.
Settings will no longer be used to retrieve local display name,
email and avatar URL. Now those values will be obtained from
the /features/base/participants Redux state.
fix(jwt/middleware): use const for default name
fix: wrong default display name on web
ref(base/participants): remove getDisplayName functions
ref(jwt): do not accept unknown user fields
Instead of assuming the initial info dialog open should auto
close, explicitly call opening of the dialog with a flag for
auto closing. This better facilitates the auto close timeout
being set at any time.
The changes led to refactoring out state in the InfoDialogButton
in preference for always clearing the timeout instead of
first checking for interaction before clearing.
Delay showing the dialog until after joining the conference
instead of as soon as possible. This resolves a few issues.
One is the dialog displaying right before the permissions
overlay is shown. Another is that logically it does not
make sense to show the invite options when unable to invite.
It also sidesteps the initial react UI bootstrapping that
can cause race conditions with toolbar re-renders causing
misalignment. Lastly, it prepares prematurely for what I
assume will be changes for when the info dialog will
actually be shown automatically.
When _setLoggingConfig is invoked for the first time old and new config
are equal and _initLogging is not called. Currently, there is no way to
detect when the first time we call it is. We could use APP.logCollector
but it should go away at some point in the future.
Never show the local participant in the large view unless it's the only
participant.
This fixes 2 issues:
- selecting the local participant when the camera permission wasn't granted
- selecting the other participant when they join a 1-1 call with video muted
* WiP(invite-ui): Initial move of invite UI to invite button
* Adjusts styling to fit both horizontal and vertical filmstrip
* Removes comment and functions not needed
* [squash] Addressing various review comments
* [squash] Move invite options to a separate config
* [squash] Adjust invite button styles until we fix the whole UI theme
* [squash] Fix the remote videos scroll
* [squash]:Do not show popup menu when 1 option is available
* [squash]: Disable the invite button in filmstrip mode
* feat(connection-indicator): implement automatic hiding on good connection (#2009)
* ref(connection-stats): use PropTypes package
* feat(connection-stats): display a summary of the connection quality
* feat(connection-indicator): show empty bars for interrupted connection
* feat(connection-indicator): change background color based on status
* feat(connection-indicator): implement automatic hiding on good connection
* fix(connection-indicator): explicitly set font size
Currently non-react code will set an icon size on ConnectionIndicator.
This doesn't work on initial call join in vertical filmstrip after
some changes to support hiding the indicator. The chosen fix is
passing in the icon size to mirror what would happe with full
filmstrip reactification.
* ref(connection-stats): rename statuses
* feat(connection-indicator): make hiding behavior configurable
The original implementation made the auto hiding of the indicator
configured in interfaceConfig.
* fix(connection-indicator): readd class expected by torture tests
* fix(connection-indicator): change connection quality display styling
Bold the connection summary in the stats popover so it stands out.
Change the summaries so there are only three--strong, nonoptimal,
poor.
* fix(connection-indicator): gray background on lost connection
* feat(icons): add new gsm bars icon
* feat(connection-indicator): use new 3-bar icon
* ref(icons): remove icon-connection and icon-connection-lost
Both have been replaced by icon-gsm-bars so they are not
being referenced anymore. Mobile looks to have connect-lost
as a separate icon in font-icons/jitsi.json.
* fix(defaultToolbarButtons): Fixes unresolved InfoDialogButton component problem
* [squash]: Makes invite button fit the container
* [squash]:Addressing invite truncate, remote menu position and comment
* [squash]:Fix z-index in horizontal mode, z-index in lonely call
* [squash]: Fix filmstripOnly property, remove important from css
ESLint 4.8.0 discovers a lot of error related to formatting. While I
tried to fix as many of them as possible, a portion of them actually go
against our coding style. In such a case, I've disabled the indent rule
which effectively leaves it as it was before ESLint 4.8.0.
Additionally, remove jshint because it's becoming a nuisance with its
lack of understanding of ES2015+.
* Javadoc introduced @code as a replacement of <code> and <tt> which is
better aligned with other javadoc tags such as @link. Use it in the
Java source code. If we switch to Kotlin, then we'll definitely use
Markdown.
* There are more uses of @code in the JavaScript source code than <tt>
so use @code for the sake of consistency. Eventually, I'd rather we
switch to Markdown because it's easier on my eyes.
* Xcode is plain confused by @code and @link. The Internet says that
Xcode supports the backquote character to denote the beginning and end
of a string of characters which should be formatted for display as
code but it doesn't work for me. <tt> is not rendered at all. So use
the backquote which is rendered itself. Hopefully, if we switch to
Markdown, then it'll be common between JavaScript and Objective-C
source code.
This is more of a principle change than a necessary one.
In lib-jitsi-meet, when a getStats call finishes, the
stats are processed and first emitted (and received by
jitsi-meet) and then processed again for sending to
remote participants. Modifying the stats in place changes
the structure of stats before the second processing,
which maybe be unexpected.
* ref(info): be able to open dialog through store
* feat(info): automatically show the info dialog
Conditions:
- Lonely call
- Has not opened the info dialog yet
* squash: change to show on start, hide later
* squash: update naming and comment
* ref(contact-list): remove invite functionality
Removing becuase there is already a toolbar button dedicated
to opening the invite dialog. Now the contact list focuses
on showing current participants.
* squash: remove unused strings and styling
* squash: add plural to panel title
This commit adds initial support for CallKit on supported platforms: iOS >= 10.
Since the call flow in Jitsi Meet is basically making outgoing calls, only
outgoing call support is currently handled via CallKit.
Features:
- "Green bar" when in a call.
- Native CallKit view when tapping on the call label on the lock screen.
- Support for audio muting from the native CallKit view.
- Support for recent calls (audio-only calls logged as Audio calls, others show
as Video calls).
- Call display name is room name.
- Graceful downgrade on systems without CallKit support.
Limitations:
- Native CallKit view cannot be shown for audio-only calls (this is a CallKit
limitaion).
- The video button in the CallKit view will start a new video call to the same
room, and terminate the previous one.
- No support for call hold.
* ref(connection-stats): use PropTypes package
* feat(connection-stats): display a summary of the connection quality
* feat(connection-indicator): show empty bars for interrupted connection
* feat(connection-indicator): change background color based on status
* feat(connection-indicator): implement automatic hiding on good connection
* fix(connection-indicator): explicitly set font size
Currently non-react code will set an icon size on ConnectionIndicator.
This doesn't work on initial call join in vertical filmstrip after
some changes to support hiding the indicator. The chosen fix is
passing in the icon size to mirror what would happe with full
filmstrip reactification.
* ref(connection-stats): rename statuses
* feat(connection-indicator): make hiding behavior configurable
The original implementation made the auto hiding of the indicator
configured in interfaceConfig.
* fix(connection-indicator): readd class expected by torture tests
* fix(connection-indicator): change connection quality display styling
Bold the connection summary in the stats popover so it stands out.
Change the summaries so there are only three--strong, nonoptimal,
poor.
* fix(connection-indicator): gray background on lost connection
* feat(icons): add new gsm bars icon
* feat(connection-indicator): use new 3-bar icon
* ref(icons): remove icon-connection and icon-connection-lost
Both have been replaced by icon-gsm-bars so they are not
being referenced anymore. Mobile looks to have connect-lost
as a separate icon in font-icons/jitsi.json.
Gradually, we exploded the error of CONNECTION_FAILED in multiple
redux state properties. The explosion makes maintenance harder because
the properties have to be updated in sync. Collect them in an object
resembling an Error instance.
It is required to clear the flag, before the connection attempt.
Otherwise the app may confuse deployments without guest access with
a one with guess access if it was visited previously and
the WaitForOwnerDialog was canceled. That's because there will be no
conference related event that clears the flag.
* Implement disabling buttons (like Web had the ability).
* Use consistent colors (e.g. for the buttons) like the rest of the app
(e.g. WelcomePage).
* Enable AbstractDialog to await a thenable from onSubmit and Dialog to
render a LoadingIndicator in place of the OK/submit button text.
* feat(AddPeopleDialog): invite rooms
Distinguish between 'user' and 'videosipgw' search result items and
invite them with using different method.
* squash: fix typo in AddPeopleDialog.web.js
It will replace the "Join" text button while appNavigate lasts.
Note about the implementation: when appNavigate completes the component
may have been unmounted and thus we cannot touch its state. In order to
avoid this problem I added a 'mounted' instance variable which gets set
and reset in componentWillMount / Unmount respectively. This is to avoid
using isMounted, which is highly discouraged.
In order to support XMPP authentication, we'll need the message
accompanying the error and carried by lib-jitsi-meet's
CONFERENCE_FAILED in the redux store. We already carry the message in
the redux action and we've got the error in the redux store.
In order to accommodate the requirements of the work on supporting XMPP
authentication on mobile/react-native, make dealing with Dialog a
little more generic and a little easier.
Filmstrip only mode displays a device selection dialog that
does not have access to the redux/connect. However, the current
VideoTrack extends from AbstractVideoTrack, which assumes a
redux connection. The fix is to move video display logic into
a separate component and have device selection use that, while
the existing VideoTrack remains connected to redux but
uses the new video display component.
Instead of going through the Avatar object, call the getAvatarURL
directly so that the code flows consistently use the participant
representation within redux.
We broke external_api.min.js by importing react/features/util which
imported react/features/base/lib-jitsi-meet.
1. To reduce the risks of such a breakage until we add
external_api.min.js to the torture tests, import as little as
possible in modules/API/external/external_api.js.
2. Use the global JitsiMeetJS on Web in react/features/base/util.
The error is stored in the redux store in base/config so other components can
consult it. It is also broadcasted as a new event in the external API for the
SDK.
- Remove references to the model ContactList.
- Replace ContactListView with an empty element for attaching
the React Component ContactListPanel, which has the same
features as the old ContactListView.
- Create new selector for getting non-fake participants for
ContactListPanel's props.
- Create a ParticipantCounter component to place in the contact
list button. Previously ContactListView updated that but now
it's a react component hooked into the participant state.
- Remove pub/sub that was used only by ContactListView.
Implement a React Component which displays children as an overlay of
local video. The WelcomePage implemented such a component inside of it
among other WelcomePage-specific logic so I split
LocalVideoTrackUnderlay out of it. The new Component is used on the
BlankPage which may be displayed in the future not only when the
WelcomePage is disabled but also when there are long running network
requests, for example.
This only helps iff there is a short transient network error which prevents the
configuration from being loaded. In such case, use the cached version in
localStorage, which may not match the shard, but it's (probably!) better than
nothing.
In case there is no Internet connectivity, an error will be produced as soon as
the XMPP connection is attempted anyway.
It's built on top of React Native's AsyncStorage. They have differing APIs, so
we implement a synchronous API on top of an asynchronous one. This is done by
being optimistic and hoping that operations will happen asynchronously. If one
such operation fails, the error is ignored and life goes on, since operations
are performed in the in-memory cache first.
Note to reviewers: LocalStorage.js lacks Flow annotations because indexable
class declarations are not yet supported:
https://github.com/facebook/flow/issues/1323 and yours truly couldn't find a way
to make the required syntax work without making it unnecessarily complex.
This patch loads the config later than we used to, that is, only once we
know the room the user is about to join.
Due to architectural limitations in lib-jitsi-meet, it needs to be
initialized with a configuration in order to properly function. This is
unfortunate because we need to create a video track in the welcome page,
but don't know the room (hence no config) yet. In order to circumvent
this problem an empty configuration is used, which is later swapped with
the appropriate one, once loaded.
Some interesting side-effects of this change are a perceived speed
increase when the app starts or a conference is hangup. They are both
due to the fact that no config needs to be fetched from a remote server
in those cases.
In order to load the configuration from the shard that will actually
host the conference, it's imperative that we add the room= query
parameter:
https://meet.jit.si/config.js?room=example
This implies a departure from our current model, where the config is
discarded if the domain for the next conference is different, but kept
otherwise.
* feat(filmstrip): show thumbnails with toolbar and on hover
* squash: reduce verbosity of logic for when to display
* squash: remove check for fake participant
Before fake participant (youtube video) would make the filmstrip
always displayed. However, youtube videos already dock the
toolbar, so filmstrip will remain displayed, so the check is
redundant.
* squash: change mouse hover listener targets
* feat(analytics): move to React
The analytics handlers have been moved to JitsiMeetGlobalNS, so now they are
stored in `window.JitsiMeetJS.app.analyticsHandlers`.
The analytics handlers are re-downloaded and re-initialized on every
lib-jitsi-meet initialization, which happens every time the config is changed
(moving between deployments in the mobile app).
* Adds legacy support for old analytics location.
We have already made the implicit decision not to pursue what the
comment describes. If we ever revisit it, it probably won't be handled
where the comment is anyway.
The torture tests were looking for the anchor tag within each
button. However, that anchor could get blown away from a react
re-render. So instead, expose a way for the torture tests
to find the root node of the button.
I'm not saying that the two commits in question were wrong or worse than
what I'm offering. Anyway, I think what I'm offering brings:
* Compliance with expectations i.e. the middleware doesn't compute the
next state from the current state, the reducer does;
* Clarity and/or simplicity i.e. there's no global variable (reqIndex),
there's no need for the term "index" (a.k.a "reqIndex") in the redux
store.
* By renaming net-interceptor to network-activity feels like it's
preparing the feature to implement a NetworkActivityIndicator React
Component which will take on more of the knowledge about the specifics
of what is the network activity redux state exactly, is it maintained by
interception or some other mechanism, and abstracts it in the feature
itself allowing outsiders to merely render a React Component.
Works only for XHR requests, which is the only network request mobile performs
(WebRTC traffic aside). The fetch API is implemented on top of XHR, so that's
covered too.
Requests are kept in the redux store until they complete, at which point they
are removed.
* ref(1-on-1): move remote visibility to a selector
Derive whether or not remote videos should display using a selector
to look across different states. A selector was chosen over using
memoized selectors (reselect) or subscribers as a first step
approach, avoiding additional mutations caused by a subscriber
updating the filmstrip state and avoiding additional api overhead
introduced by reselect.
* rename selector
* ref(recording): convert recording label to react
- Create a RecordingLabel component for displaying the current
recording state, as reflected in the redux store. This is
needed for 1-on-1 mode to be completely in redux.
- Update the store with the recording state so RecordingLabel
can update itself.
- Remove previous logic for updating the non-react label, which
includes event emitting for filmstrip visibility changes,
as RecordingLabel is hooked into redux updates.
* ref(recording): use status and type constants from lib
* make label really dumb, move logic back to Recording
Create empty elements within InlineDialog content that can be
used to bridge mouse movement from the InlineDialog trigger to
the InlineDialog content. The empty elements are positioned
absolute so they can break out of the InlineDialog container
and not affect popper's position calculations.
I see it as the first step in simplifying the route navigate of the
JavaScript app by removing BlankWelcomePage from _getRouteToRender. From
a faraway point of view, the app is at the route at which it is not in a
conference. Historically, the route was known as the Welcome page. But
mobile complicated the route by saying that actually it may not want to
see the room name input and join button.
Additionally, I renamed BlankWelcomePage to BlankPage because I don't
think of it as a WelcomePage alternative but rather as a more generic
BlankPage which may be utilized elsewhere in the future.
I plan for the next steps to:
* Merge Entryway, _interceptComponent, and _getRouteToRender in one
React Component rendered by AbstractApp so that the whole logic is in
one file;
* Get rid of RouteRegistry and routes.
When do we need tracks?
- Welcome page (only the video track)
- Conference (depends if starting with audio / video muted is requested)
When do we need to destroy the tracks?
- When we are not in a conference and there is no welcome page
In order to accommodate all the above use cases, a new component is introduced:
BlankWelcomePage. Its purpose is to take the place of the welcome page when it
is disabled. When this component is mounted local tracks are destroyed.
Analogously, a video track is created when the (real) welcome page is created,
and all the desired tracks are created then the Conference component is created.
What are desired tracks? These are the tracks we'd like to use for the
conference that is about to happen. By default both audio and video are desired.
It's possible, however, the user requested to start the call with no
video/audio, in which case it's muted in base/media and a track is not created.
The first time the app starts (with the welcome page) it will request permission
for video only, since there is no need for audio in the welcome page. Later,
when a conference is joined permission for audio will be requested when an audio
track is to be created. The audio track is not destroyed when the conference
ends. Yours truly thinks this is not needed since it's a stopped track which is
not using system resources.
Iterate over objects and copy over primitives and arrays
instead of using _.merge, as merge will not replace a config
entry completely. For arrays in a target object, the arrays
will have its indices replaced. This means if a source array
is empty, the target array will be left alone. Similarly,
if the target array is longer than a source array, there
will be indices not touched in the target array.
* ref: video muted state
Get rid of 'videoMuted' flag in conference.js
* ref: audio muted state
Get rid of 'audioMuted' flag in conference.js
* fix(conference.js|API): early audio/video muted updates
* ref(conference.js): rename isVideoMuted
Rename isVideoMuted to isLocalVideoMuted to be consistent with
isLocalAudioMuted.
* doc|style(conference.js): comments and space after if
* ref: move 'setTrackMuted' to functions
* fix(tracks/middleware): no-lonely-if
* ref(features/toolbox): get rid of last argument
* ref(defaultToolbarButtons): rename var
- Remove non-redux paths for hiding and showing remote videos.
- Hook web filmstrip to redux to know when to hide remote videos.
This works, even though VideoLayout is handling RemoteVideo
appending, because react is only monitoring filmstrip's declared
JSX which does not change except for attributes (css classes).
Deep/universal linking now utilizes loadURL (when possible). But loadURL
is imperative in the native source code while its JavaScript counterpart
i.e. React App Component prop url is declarative. So there's the
following bug: open a URL, leave the conference (by tapping the hangup
button, for example), and then opening the same URL actually leaves you
on the Welcome page (if enabled; otherwise, a black screen).
The implementation has a flow though: opening the same URL twice in a
row without an intervening leave will leave the first opening and join
the new opening. Which can be improved by not leaving and joining if the
conference is joined, joining, an not leaving. But that can be done
separately as an improvement independent of the current implementation
details.
As https://facebook.github.io/react/docs/typechecking-with-proptypes.html
says, React.PropTypes have moved into the npm package prop-types since
React v15.5. I've already failed to update certain devDependencies
because they mandate the use of prop-types so I'd rather we (gradually
at least) move to prop-types rather than face a lot of work later on.
* fix(quality-slider): prevent resizing by making p2p warning hidden
Instead of removing and appending the p2p warning, make it always
appended but toggle visibility so it always takes up space. This
should prevent resizing when the warning appears. Margin and
padding were adjusted to account for the empty space displayed
by a hidden p2p warning.
* let vertical size change
* ref(invite): use AtlasKit for invite modal buttons and inputs
- Convert button to AK Button.
- Convert inputs to AK FieldText.
* remove noop, replace with custom empty func
* feat(small-video): use InlineDialog for stats and remote menu
- Remove JitsiPopover and use InlineDialog instead.
- Bring the remote menu icon into react.
- Make vertical filmstrip position:fixed so popper (AtlasKit
dependency) sets InlineDialogs and eventually tooltips to
position:fixed.
* ref(remote-menu): hook KickButton to redux
* ref(remote-menu): hook MuteButton to redux
* modify padding, toggle dialogs
* pixel push margins to align dialogs, adjust padding of dialogs
* add comment about margin for dialog, add file I forgot
* modify indicator markup so the icon can be moved down while trigger stays at top of toolbar
- Re-use the native redux pinning implementation for web
- Remove pinning logic from conference.js
- To the native pinning add a check for sharedVideo so
youtube videos do not send a pin event
- Add shared videos as a participant to enable pinning and
so they can eventually get added to the filmstrip
- Emit UIEvents.PINNED_ENDPOINT from middleware
* feat(quality-slider): initial implementation
- Add new menu button with an Inline Dialog slider for
selecting received video quality.
- Place P2P status in redux store for the Inline Dialog
to display a warning about not respecting video quality
selection.
- Respond to data channel open events by setting receive
video quality. This is for lonely call cases where a
setting is set before the data channel is open.
- Remove dropdown menu from video status label and clean
up related js and css.
* first pass at addressing feedback
- Move VideoStatusLabel to video-quality directory.
- Rename VideoStatusLabel to VideoQualityLabel.
- Open VideoQualitydialog from VideoQualityLabel.
- New CSS for making VideoQualityLabel display properly.
- Do not render VideoQualityLabel in filmstrip only instead of hiding with css.
- Remove tooltip from VideoQualityLabel.
- Show LD, SD, HD labels in VideoQualityLabel.
- Remove action SET_LARGE_VIDEO_HD_STATUS from conference.
- Create new action UPDATE_KNOWN_LARGE_VIDEO_RESOLUTION in large-video.
- Move VideoQualityButton into video-quality directory.
- General renaming (medium -> standard, menu -> dialog).
- Render P2P message between title and slider.
- Add padding to slider for displacement caused by P2P message's new placement.
- Fix display issue with VideoQualityButton displaying out of line in the
primary toolbar.
* second pass at addressing feedback
- Fix p2p inline message color
- Force labels to break on words
- Resolve rebase issues, including only dispatching quality
update on change. Before there was double calling of dispatch
produced by an IE11 workaround. This breaks now when setting
audio only mode to true twice.
- Rename some instances of quality to definition
* rename to data channel opened
* do not show p2p in audio only
* stop toggle audio only icon automatically
* remove fixme about toolbar button
* find closest resolution for label
* toggle dialog on button click
* redo last commit for both button and label
* ref(base/conference): add tracks before join
Sometimes it will be suboptimal to add local tracks to the conference,
after the room has been joined. It may slow down the session initiation
process by having to send unnecessary 'source-add' notifications.
* squash: fix typos/comments
* feat(feedback): convert to react and redux
- For styles, remove "aui-dialog2" nesting so existing styles
can be reused.
- Remove Feedback.js and replace with calls to redux for state
storing and accessing.
- Add dispatching to FeedbackButton instead of relying on jquery
clicking handling so the button can be hooked into redux.
* address feedback
* remove calling to not show feedback for recorder and filmstrip
Simplify the code by using a bitfied instead of a couple of boolean flags. This
allows us to mute the video from multiple places and only make the unmute
effective once they have all unmuted.
Alas, this cannot be applied to the web without a massive refactor, because it
uses the track muted state as the source of truth instead of the media state.
Currently lib-jitsi-meet looks there in case the `anonymousdomain` config option
was specified.
While this commit alone doesn't add support for authenticated deployments, it
avoids a failure if `anonymousdomain` was set, regardless of authentication being
turned on or not.
Fixes: https://github.com/jitsi/jitsi-meet/issues/1858
Refactors the previous "[RN] Cache avatars and provide a default in
case load fails" for the purposes of simplification but also modifies
its functionality at the same time. For example:
- Always displays the default avatar immediately which may be seen if
the remote avatar needs to be downloaded.
- Does not use random colors.
- Uses a default avatar image which is not transparent and ugly but at
least it's the same image that's used on Web. I've started talks to
have images/avatar2.png replaced with a transparent and beautiful
so that will land later on and we'll see the automagic colors in all
their glory then.
Avatars are cached to the filesystem and loaded from there when requested again.
The cache is cleaned after a conference ends and on application startup
(defensive move).
In addition, implement a fully local avatar system, which is used as a fallback
when loading a remote avatar fails. It can also be forced using a prop.
The fully local avatars use a user icon as a mask and apply a background color
qhich is picked by hashing the URI passed to the avatar. If no URI is passed a
random color is chosen.
A grace period of 1 second is also implemented so a default local avatar will be
rendered if an Avatar component is mounted but has no URI. If a URI is specified
later on, it will be loaded and displayed. In case loading the remote avatar
fails, the locally generated one will be used.
- Create a notification component for displaying a toggle.
- Create an action for showing the component if allowed by
the local storage setting and for saving the setting to
local storage.
- Remove all notifications having a timeout by default so the
device error notification must be dismissed manually.
- Split the camera and mic error dialog into two separate
notifications.
* feat(presence): display status in thumbnail and large video
- Create a React Component for displaying presence. It currently
connects to the store for participant updates but in the future
should not be as smart once more reactification occurs.
- Modify filmstrip css so the presence status displays horizontal
center and below the avatar.
- Modify videolayout css so the presence status displays horizontal
centered and with a rounded background.
- Dispatch presence updates so the participant state can be update.
- Update message position on large video update to ensure message
positioning is correct.
* squash: do not show presence message if connection message is displayed
Hides the UI component showing dialout codes and uses the dial input without validating it.
Skips printing error when dial-in numbers is not configured.
- Swap the telephone input with FieldText.
- Swap the dropdown trigger input with FieldText for styling
consistency with the telephone input.
- Wrap the dropdown trigger so it can be modified with jitsi css.
- Use flexbox to have the trigger and input align horizontally
but have the input take up width if the trigger is not displayed.
* feat(notifications): implement a react/redux notification system
* squash into impl explicit timeout, style
* ref(notifications): convert toastr notifications to use react
* ref(toastr): remove library
* squash into conversion: pass timeout
* squash into clean remove from debian patch
Make toolbar's microphone button enabled whenever there are any
'audioinput' devices available and allow to add audio during
the conference even if microphone permissions were denied on startup.
Whatever I've tried so far ends up failing in really weird ways, so let's admit
defeat, for now. Destroy containers only on Android.
This shall be revisited when we update RN to version >= 0.43 and we have
"display: 'none'" available.
Web's ExternalAPI accepts an object with properties as one of its
constructor arguments and from which it generated a URL. Mobile's
JitsiMeetView.loadURLObject is supposed to accept pretty much the same
object.
Introduces loadURLObject in JitsiMeetView on Android and iOS which
accepts a Bundle and NSDictionary, respectively, similar in structure to
the JS object accepted by the constructor of Web's ExternalAPI. At this
time, only the property url of the bundle/dictionary is supported.
However, it allows the public API of loadURLObject to be consumed. The
property url will be made optional in the future and other properties
will be supported from which a URL will be constructed.
When a Container is not visible there is no need for it to react to touch
events, thus avoid wrapping it in a touch component.
In addition, simplify the style needed for hiding the component. Moving the view
out of the window boundaries no longer works on RN 0.42 on iOS. Seting the size
to 0 works well on both platforms, but in the future (when we upgrade to RN >=
0.43) we should switch to display: none:
4d69f4b2d1
Because on web video track is stored both in redux and in 'localVideo'
field, video is attempted to be unmuted twice when turning off the audio
only mode. This will crash the app with 'unmute operation is already in
progress'. This commit will prevent from taking action from the web
world if the video track already exists and will make the redux side
rollback unmuted status in case unmute fails.
In another installment of "how on earth?!", using a 1px border instead of a
0.2px border fixes view clipping on a device where it didn't work before
(Moto X Play).
Observations:
- When nothing was rendered, rotating the device made the buttons show up, this
makes me think the Surface is not properly composited with the toolbar view
for some reason. Why this happens in some devices and not in others remains a
mistery.
Other approaches attempted:
- Setting View.collapsed to false so it will remain in the view hierarchy. It
made no effect.
- Setting View.needsOffscreenAlphaCompositing to true. It made no effect.
Just like before, I came up with this workaround by accident, but couldn't find
another way, so here we go again.
This essentially reverts
023359b9d2
In the filmstrip we keep a container full of thumbnail views. Destroying these
every time we want we want to hide it is costly, as new renderers have to be
recreated, and they lack context, so there is an increased chance for "black
thumbnails".
With the upgarde of @atlaskit/icon to 7.0.0, the size prop
essentially became required to maintain its appearance in the
jitsi app, otherwise it'll unexpectedly try to take up the
available space and cause minor display issues.
The speakerStatus field already exists as part of the objects
in the participant reducer. When the library updates the
connection status of a user, plumb that update through to redux.
Instead of passing stats through UI then VideoLayout then the
SmallVideo, pass stats directly to what uses it--ConnectionIndicator.
This also bypasses adding the stats to the store, as they do not
seem to be something that needs to be shared or stored app-wide
just yet.
The end goal of this patch was to avoid opening the camera when there is no
welcome page.
In order to achieve this, the logic for creating the local tracks was
refactored:
Before this patch local tracks were created when lib-jitsi-meet was initialized,
and destroyed when it was deinitialized. As a side note, this meant that when a
conference in a non-default domain was joined, local tracks were destroyed and
recreated in quick succession.
Now, local trans are created and destroyed based on what the next route will be,
and this happens when the target room has been decided. This allows us to create
local tracks the moment we need to render any route, and destroy them when there
is no route to be rendered. As an interesting byproduct, this refactor also
avoids the destruction + recreation of local tracks when a conference in a
non-default domain was left.
* feat(local-video): convert to react
- Create a VideoTrack component for displaying a video element.
This mirrors native also having a VideoTrack component.
- The VideoTrack component does not let React update it to prevent
the video element from re-rendering, which could cause flickers
and would not work with temasys's overriding of the video element.
- VideoTrack extends AbstractVideoTrack to mirror native
implementation and to get the dispatch of the onplaying event.
- Remove the onclick handler on the video element. Honestly, I
didn't get it to work, and did not try, but it is also unnecessary
because another handler already exists on the video wrapper.
* ref(device-selection): VideoInputPreview uses VideoTrack to show video
* squash into conversion: change css selectors
* squash into conversion: mix in abstract props
* squash into conversion: change shouldComponentUpdate check
* squash: update comment about why triggerOnPlayingUpdate is used
config.disableDesktopSharing - when set to false will disable desktop
sharing
interfaceConfig.DESKTOP_SHARING_BUTTON_DISABLED_TOOLTIP - when value is
assigned, will not hide the desktop sharing button completely, but show
as disabled with this value used as the tooltip text.
Listeners were set for when a track muted or changed its video
type, but the listeners were never removed. This would could
cause events to keep firing on the removed tracks, which would
cause redux to fire and error because the tracks were no longer
known. That the tracks still fire events after removal is
another issue...
Chrome has deprecated line breaks in requests. The template
literal used for the searchPeople url has a line breaks. Instead
of line breaking the request url, concatenate it together.
Dynamically enables/disables the toolbar video button. Prior to that
commit if we would start with no video there would be no way to enable
it later on.
Keep track of the connection and conference objects so we can leave and / or
disconnect early, before the connection is established or the conference joined.
React (pun intended) to prop changes, that is, load the new specified URL.
In addition, fix a hidden bug in loading the initial URL from the linking
module: we prefer a prop to the URL the app was launched with, in case somehow
both are specified. We (the Jitsi Meet app) are not going to run into this
corner case, but let's be defensive just in case.
* fix(filmstrip-only): vertically align center the toolbar
Use top 50% to position the toolbar's top at the vertical center
of the iframe. Then use transform 50% to move the toolbar itself
up 50% so its middle matches the middle of the iframe.
* squash: toolbox should center with filmstrip
Apparently iOS doesn't like dangling background tasks very much, so update the
background timers plugin with a version which fixes this.
https://github.com/ocetnik/react-native-background-timer/pull/38
Also accomodate for the API changes upstream.
Credits to @lyubomir for finding the needle in the haystack.
* feat(display-name): convert to React
- Create a new React Component for displaying and updating display
names on small videos
- The updating of the Component is defined in the parent class
SmallVideo, which children will get access to through prototype
copying
- Create a new actionType and middleware so name changes that occur
in DisplayName can be propogated to outside redux
- Update the local video's DisplayName when a conference is joined
or else the component may keep an undefined user id
* squash: query for the container, not the el owned by react
- Create a new ConnectionIndicator component for displaying an
icon for connection quality and for triggering a popover. The
popover handling has been left in ConnectionIndicator for now,
which follows the existing implementation.
- Remove the unused method "connectionIndicatorShowMore"
- Change the implementation of existing methods that update the
connection indicator to call the same method which will rerender
the indicator completely.
- Add tracks to the redux store by intercepting where the
tracks actually get used via conference.replaceTrack
- While the replace call is unique to web, the _dispose and
_addTracks calls use existing native code implementations
- Between _dispose and addTracks is a call to update mute state.
Without it, when changing devices or videoType while muted,
the user will stay muted (whereas existing web behavior
causes unmute). This is due to middelware calling
_syncTrackMutedState to make the track mute if the user is
currently muted.
- Move the rest of ConferenceEvents.TRACK_MUTE_CHANGED into
middleware so the event is no longer used
- Note: This change does not guarantee the track state in the
redux store will be 100% accurate, specifically the attribute
videoStarted. Muted and videoType should be accurate.
- Use actions trackAdded and trackRemoved to add and remove remote
tracks from the redux store
- Emit out to non-react components on track added and removed in
the track middleware
- Emit out to existing non-react components on track mute and
video type changes
Move all logic related to displaying a table of connection stats to a React
Component. The actual parsing logic was modified as little as possible as the
focus is moving display to React.
- Create new React Components for RemoteVideoMenu and its
buttons
- Remove existing menu creation from RemoteVideo
- Refactor RemoteVideo so all function binding happens once in
the constructor, removing the need to rebind when updating
the RemoteVideoMenu
- Allow popover to append and remove React Components from itself
- Refactor popover so post-popover creation calls are broken out and
popover removal behavior is all done in one function.
When entering audio-only mode, VideoBridge is instructed to stop sending
remote videos. However, if the instruction fails because DataChannels do
not work, for example, then the app continues to display the remote
videos. Even though they're received in the case of such a failure, no
videos are to be displayed in audio-only mode.
The value of inviteURL is derived from locationURL by removing the hash
and query/search params in order to make it fit for display and/or
public purposes. The Jitsi Meet SDK consumers do not fall into that
category and our intention is to provide them with the URL they used
with JitsiMeetView.openURL(URL) anyway.
Also rewrites to remove repetition. I'm not saying the new source code
is better really but at least I got to examine it and comment on some of
its weaknesses.
The current implementation doesn't use the API and Transport modules. This is
due to the fact that they are too tied to APP at the moment, which is web only.
Once API is refactored and moved into the Redux store this will be adjusted,
though it's unlikely that the lowest level React Native module (ExternalAPI)
changes drastically.
This commit also introduces a stopgap limitation of only allowing a single
instance for JitsiMeetView objects on both Android and iOS. React Native doesn't
really play well with having multiple instances of the same modules on the same
bridge, since they behave a bit like singletons. Even if we were to use multiple
bridges, some features depend on system-level global state, such as the
AVAudioSession mode or Android's immersive mode. Further attempts will be made
at lifting this limitation in the future, though.
Introduce certain React Components which may be used to write
cross-platform source code such as Audio like Web's audio, Container
like Web's div, Text like Web's p, etc.
The counterpart of the external API in the Jitsi Meet Web app uses the
search URL param jwt to heuristically detect that the Web app is very
likely embedded (as an iframe) and, consequently, needs to forcefully
enable itself. It was looking at whether there was a JSON Web Token
(JWT) but that logic got broken when the JWT support was rewritten
because the check started happening before the search URL param jwt was
parsed.
We've had Filmstrip & LargeVideo React Components on mobile/React Native
from the start. We didn't have them on Web (because the rewrite in React
is not complete yet). However, that led to differences in the React
Component Conference on Web and mobile. In an effort to get closer to
merging the React Component Conference on Web and mobile, introduce the
React Components Filmstrip & LargeVideo on Web even if a minimal
render-only form at this time.
* fix(vertical-filmstrip): different label animations for filmstrip states
Instead of one timing for sliding the video status label left and right,
have different timings depending on the filmstrip state. To facilitate
triggering the different animations, add more classes to the labels
that need to move that specify the filmstrip state.
- Faster transition if focusing on self-view with videos present so
the label does not overlap videos transitioning from 0 opacity.
- Transition delay when de-focusing on self-view with videos present
so videos have time to go away before the label moves over them.
- Maintain no movement if there are no videos, regardless of
filmstrip toggle state.
- Different delays for when the filmstrip is being toggled visible
and hidden if there are remote videos visible.
* SQUASH: remove remote videos count
* SQUASH: add docs to scss
The video status labels, which include recording and hd status,
have been moved back to the top left while in vertical filmstrip
mode. The following had to be done:
- Remove styling to move the labels to the bottom left
- For VideoStatusLabel, move filmstrip remote video count, toggle
state, and 1:1 state into redux.
- Use middleware to emit out to the Recording label when the
filmstrip changes.
- Create an empty Filmstrip file for web and identify the existing
Filmstrip component as native.
The 1:1 call UI and vertical filmstrip act on remote videos
while leaving local video alone. To facilitate acting only on
remote videos, place remote videos into their own container element.
Audio only mode will be toggleable only from the VideoStatusLabel,
so remove AudioOnlyButton from the toolbar and delete the component
itself. As a result of the button being removed, a truthy check in
VideoStatusLabel was also removed to ensure it will display as it
is now the only way to toggle audio only mode. Also set the cursor
on VideoStatusLabel to always be default, so it can never show the
text cursor.
Add a menu that displays when hovering over VideoStatusLabel. The menu's
display is controlled by CSS. As the existing AudioOnlyLabel no longer needs
needs its own tooltip, it has been removed and label display logic has been
moved into VideoStatusLabel.
DialInNumbersForm has been modified to display a conference id to be used for
dialing into the conference. The changes include:
- Requesting the conference id and adding the conference id to the redux store
- Displaying the conference id in DialInNumbersForm
- Modifying the copy behavior to support copying the new message to clipboard
- DialInNumbersForm does not display until all ajax requests have completed
successfully. This eliminates the need for the REQUESTING state.
In its current implementation, the VideoStatusLabel shows HD based on peer
connection stats. These stats will be available on temasys browsers soon but
will remain unavailable on Firefox, which does not collect height/width stats.
To support VideoStatusLabel showing cross-browser, move the high-definition
detection out of stat sniffing and instead check the video element itself using
an interval in LargeVideoManager. (An interval was used because the temasys
video object does not support the onresize event.) Also, add a cleanup path from
conference.web to LargeVideoManager to remove the interval.
There were getDomain, setDomain, SET_DOMAIN, setRoomURL, SET_ROOM_URL
which together were repeating one and the same information and in the
case of the 'room URL' abstraction was not 100% accurate because it
would exist even when there was no room. Replace them all with a
'location URL' abstraction which exists with or without a room.
Then the 'room URL' abstraction was not used in (mobile) feature
share-room. Use the 'location URL' there now.
Finally, removes source code duplication in supporting the Web
application context root.
Device selection has live previews that reuse the current local
audio and video tracks for the sake of internet explorer. This
means when the local video was muted, device selection would
show a muted message. It is preferred to show a live preview
even when muted.
The changes include:
- Passing device ids into DeviceSelectionDialog, not tracks.
- Setting default selected devices to use for live previews.
- Removing all checks in DeviceSelectionDialog involving local tracks.
- Catching and displaying errors when creating a live video preview.
Move the HD label into the newly renamed VideoStatusLabel
component. That way it cannot be possible for the audio only
label and the HD label to display simultaneously.
Audio only mode can be used to save bandwidth. In this mode local video is muted
and last N is set to 0, thus disabling all remote video.
When this mode is enabled avatars are shown.
* fix(react/participant): store display name in redux
* feat(remotecontrol): Add option to display the authorization dialog in meet
* feat(remotecontrol): Enable ESLint and Flow
toolbox/functions has functions that are specific only to web,
specifically defaultToolbarButtons. This has caused the native
build to attempt to bring in a web dependency which leads to a
build error. The fix for now is splitting web functions from
native functions to resolve the build error.
Create a new React Component for displaying a list of dial-in
numbers. The Component will fetch the numbers from a new
numberRetreviewUrl key/value set in config. If not present in
config, the Component will not be displayed.
AtlasKit DropdownMenu cannot be disabled, unlike Single Select.
The result is the isDisabled prop was not being honored. The
workaround is returning only the trigger element for the dropdown
and styling it to look like the dropdown is disabled. The text
for disabled device selection was changed along the way to fit
into the trigger.
Watermarks can be used to link to an external site by configuring a URL.
However, the URL is optional. When it is not set, the watermark should
not be clickable. This prevents users from reloading the room by
clicking on a watermark (caused by an HTML anchor element without an
href).
The functionality around logging including logging_config.js i.e.
loggingConfig and the other classes and/or functions that initialize
loggers for Jits Meet truly deserves a feature of its own. Start getting
in that direction on both Web and mobile by introducing
features/base/logging and bringing loggingConfig to mobile.
The config object defined by lib-jitsi-meet is not used by
lib-jitsi-meet only, jitsi-meet respects its values as well.
Moreover, jitsi-meet defined classes and/or functions which manipulate
that config object. Consequently, it makes sense to move the config
object and the associated classes and functions in a dedicated feature.
AtlasKit Dropdown was recently updated to support fitting the
width of its container. However, AtlasKit Button, the trigger
element currently used for the dropdowns, does not fit the width
of AtlasKit Dropdown and stll has text overflowing out of its
button when there is an iconBefore prop passed in. Instead of
using AtlasKit Button, use a div and mimic the button look. This
allows the "button" to fit the container width and can display
ellipsized text within itself.
@virtuacoplenny, the changes of this commit are not necessarily in
source code that you introduced in
https://github.com/jitsi/jitsi-meet/pull/1499 but I saw violations in
files modified in the PR which I had to read in order to understand the
PR.
Converting the invite modal includes the following:
- Creating new react components to display InviteDialog. The
main parent components are ShareLink and PasswordOverview,
the later handles displaying lock state and password editing.
These components do not make use of atlaskit as the component
for input does not yet support readonly, so for consistency
within the modal content no atlaskit was used.
- Using redux for keeping and accessing lock state instead of
RoomLocker.
- Publicly exposing the redux action lockStateChanged for direct
calling on lock events experienced on the web client.
- Removing Invite, InviteDialogView, and RoomLocker and references
to them.
- Handling errors that occur when setting a password to preserve
existing web funtionality.
When a dialog is opened on Android, full-screen mode is exited but we (the app)
know nothing about this. Make sure we re-enter full-screen mode once a dialog is
closed, if the conditions to be in such mode are still met.
Instead of using AtlasKit Single-Select, use Dropdown. Dropdown
differs in that an icon can be specified for the trigger element,
whereas Single-Select currently supports icons for all elements,
and Dropdown can show all options incuding the already-selected
option.
This change does introduce the issue of the trigger element not
taking up 100% width of the parent. Supporting such would involve
overriding AtlasKit CSS. The compromise made here was to do a
generic override of max-width so the trigger elements at least
stay within the parent and aligning the trigger elements to the
right.
Some atlaskit components, such as field-text, inherit text color.
This is a problem with components that are white as they will
inherit $defaultColor, which is a light gray. So instead, for
the atlaskit modal, set a color for all the form content so it
can be inherited instead.
Dialog does not currently support displaying dynamic strings
for titles, only static strings listed for translation. Accept
a new prop that explicitly states it is for setting the title
and have the web dialog prefer it over the titleKey.
When the prosody setting has muc_allowners, everyone joins as a
moderator. In this case, the local user will not be set as a
moderator in the redux store as the USER_ROLE_CHANGE event will
trigger with the local user id before the redux store has set
the actual local user id--something that happens on
CONFERENCE_JOINED. The fix is to explicitly signal the local user
role has changed to the redux store, which follows the
implementation of pre-existing web logic.
Device Selection re-uses the local video track for its preview.
When displaying Device Selection while video muted, the text
"muted" displays within the video preview, but some translations
may mistake this to mean audio muted. The text has been changed
to be explicit about video mute. This is a temporary solution;
at some point Device Selection should not re-use the local track
except for IE, the one browser that cannot get multiple tracks
from the same video input.
Over time features/base/util became a bucket where people seemed to dump
just about anything they couldn't think of a better place for. That's a
trend I don't like encouraging. Given that roomnameGenerator.js is
currently used in features/welcome only, I'm fine with moving it there
for the greater good.
Because timeUtil.js computes hours, minutes, and seconds out of a single
time/duration using three separate functions, I wouldn't recommend using
it, especially reusing it. That's why I'm even making the functions
private to their current use location.
I don't like the file/function name, I'm not excited about the
complexity of the logic it implements, and it's definitely a reusable
piece worthy of being called a utility.
Move logic to open device selection outside of SettingsMenu so
it can be called independently by either SettingsMenu or by
the settings button itself if no other settings but devices will
be displayed.
Saúl Ibarra Corretgé reported that Recording shows an error dialog
stating "There was an error connecting to your camera". Hristo Terezov
and Yana Stamcheva traced that the problem originates in
da4425b5c0
and, more specifically, is caused by a different order of execution due
to the move of the invocation of the function Recording.init.
The solution is to bring back the execution location of Recording.init.
Atlaskit at times will have localized styling for font-size and
sometimes will not. The button component will inherit its
font-size whereas selectors have localized font-size of 14px. For
consistency, the cancel/submit buttons on the atlaskit modals
will also have 14px. The atlaskit story book examples also use
buttons with 14px font-size.
For images < 80 of size forder radius doesn't work properly (it looks like a
square with rounded corders), however, using a duble sized radius does the
trick. Go figure.
The Device Selection modal consists of:
- DeviceSelection, an overly smart component responsible for
triggering stream creation and cleanup.
- DeviceSelector for selector elements.
- VideoInputPreview for displaying a video preview.
- AudioInputPreview for displaying a volume meter.
- AudioOutputPreview for a test sound output link.
Store changes include is primarily storing the list of
available devices in redux. Other app state has been left
alone for future refactoring.
We seemed to be using the names "film strip" and "filmstrip" (and,
consequently, their source code-conscious forms such as film-strip,
FilmStrip, etc.) In order to comply with our coding style which requires
a consistent one name for a given abstraction, choose one name and
rename the uses of the other name.
Wikipedia has a definition of a "filmstrip", I couldn't find a "film
strip". I guess our abstraction can be seen as what's described there.
When I google "film strip", I get results about "filmstrip" at the top.
That's why I chose "filmstrip".
Certain uses of "film strip" such as interfaceConfig.filmStripOnly and
in the external API I left untouched in an attempt to preserve
compatibility.
I wasn't sure whether CSS was tangled in compatibility so I made a
choice and renamed there was well.
When a conference is to happen in a domain which is not the defaut, its config
is loaded and set. As part of this process, lib-jitsi-meet is disposed. Because
disposing is asynchronous, events happen in this sequence:
- set new config
- dispose lib (which effectively wipes the config)
- init lib
This results in the library to be initialized without the loaded config, which
was lost. This commit fixes that by delaying setting the config and
re-initializing the library until it was disposed.
The functionality to use the react-native-webrtc custom API for fast switching
cameras was moved to JitsiLocalTrack in lib-jitsi-meet. Use that.
Ref: https://github.com/jitsi/lib-jitsi-meet/pull/444
The behavior can be triggered with the toggleAudioOnly action, which is
currently fired with a button.
The following aspects of the conference will change when in audio only mode:
- local video is muted
- last N is set to 0 (effectively muting remote video)
- full-screen mode is exited
- audio mode is set to "audio chat" (default output is the earpiece)
- the wake lock is disengaged
One aspect not handled in this patch is disabling the video mute button while in
audio only mode. The user should not be able to turn back video on in that case.
They better represent if a participant has video available or not. There are
cases when even a participant in the last N set would not have video because it
disconnected momentarily, for example.
Use the curstom _switchCamera API provided by react-native-webrtc to toggle the
camera instead of destroying the current track and creating a new one.
_switchCamera is implemented at a low level, so the track perceives no changes,
thus being a lot faster and less involved since the capturer doesn't need to be
destroyed and re-created.
In addition, don't mirror the video for the back camera.
Ref: https://github.com/oney/react-native-webrtc/pull/235
When a new local video track is created an associated video capturer is created
for it. The cause for the freezes seems to be creating mutliple tracks (which
come with a video capturer each). Fix this by first disposing of the previous
video track before creating the new one.
Ref:
https://github.com/oney/react-native-webrtc/issues/209#issuecomment-281482869
Lib-jitsi-meet does not really implement isScreenSharing. Besides,
getCameraFacingMode will already make sure that the video track does not
represent a desktop stream.
It got broken while rewriting the Web toolbar in React Toolbox. There is
a problem with the toolbars and how we construct the intialState of the
buttons. The _getInitialState() in the toolbox reducer gets the list of
buttons from interfaceConfig, but in fact interfaceConfig is meant to be
overriden in several very important cases. One of the cases being the
external API, which we use in several projects in production.
JSDoc comments didn't follow the ESLint rule for properly formatted
sentences.
BTW, I'm not blind to the fact that PasswordRequiredPrompt and
RoomLockPrompt participated in a birthing of source code through
copy+paste. (If we do not copy+paste, we will not have to fix one and
the same source code such as comments multiple times.)
https://github.com/jitsi/jitsi-meet/pull/1397 (React Toolbar) is huge at
the time of this writing. In order to reduce it, I'm extracting changes
not directly related to React-ifying the Toolbar such as added jsdocs
and source code formatting.
This is in preparation for an upcoming "audio only mode" feature. Setting last N
will also be required for it, so this patch factors out the action and makes it
public so other modules can reuse it.
In addition, if the value is set to undefined the configured default value (or
-1 if absent) is picked.
Replaces changeAvatarID, changeAvatarURL and changeEmail with
participantUpdated action.
participantUpdated can be fired for local user without id. This
fixes the problem with updating the local user before the user
join the conference which results in fix for failing to execute
commands for avatarID, avatarURL and email right after the iframe
api creates the iframe with Jitsi Meet.
In this case makes more sense to have overlay frame included in every overlay instead
of abstract class that implements the overlay frame and have to be extended by every
overlay. In addition, mapStateToProps isn't working well with inheritance.
The error raised by JitsiMeetJS.init() is already in the state of
features/base/lib-jitsi-meet so it's not a good design to store the same
error in the state of features/unsupported-browser.
Fixes an issue where immersive mode would be enabled when coming back from the
background on the welcome screen.
Re-fixes c57e713, which was not correct.
On RN we don't use the global APP object, so don't save the store there unless
it's defined, which is the case in the current web version. Also, check for
undefined explicitly, since a "if (!APP)" check will throw a ReferenceError.
The mobile app remembers the domain which hosted the last conference. If
the user specified a full URL first and specified a room name only the
second time, it was not obvious that the second conference would be
hosted on the domain of the first conference.
Looks like Android gets confused as to what surface to blit when we hide or
show toolbars. Setting a border on the container, seems to force the entire
area to blit properly.
Other attempted approaches, with no success:
- zIndex of -100
- width and height of 0
- opacity of 0 and setting 'disabled' on touch containers
This patch applies the workaround in the welcome page and conference containers.
Lib-jitsi-meet uses jQuery's .append method to manipulate Jingle. The
method in question invokes the getter and setter of Element.innerHTML.
Unfortunately, xmldom which we use in React Native to polyfill DOM does
not polyfill Element.innerHTML. So polyfill it ourselves.
Turns out React Native's timers (setTimeout / setInterval) don't run while the
app is in the background: https://github.com/facebook/react-native/issues/167
This patch replaces the global timer functions with those from the
react-native-background-timer package, which work in the background.
These timers won't magically make an application work in the background, but
they will run if an application already happens to run in the background. That's
our case while in a conference, so these timers will run, allowing XMPP pings to
be sent and the conference to stay up as long as the user desires.
- Use 1 name for 1 abstraction. Instead of useFullScreen and enabled use
fullScreen.
- Comments are correct English sentences so no double spaces between
senteces, no capitalization of the work On midsentence.
- Write as little source code as possible if readability is preserved.
- Utilize Facebook's Flow.
- The name of a private function must start with _ and the jsdoc should
state that the function is private.
The implementation varies across platforms, with the same goal: allow the app to
use the entire screen real state while in a conference.
On Android we use immersive mode, which will hide the status and navigation bars.
https://developer.android.com/training/system-ui/immersive.html
On iOS the status bar is hidden, with a slide effect.
The desired behavior of the button 'Start a conference' / 'Join the
conversation' is to launch the mobile app if installed; otherwise, do
nothing i.e. continue to display UnsupportedMobileBrowser.
Anyway, we may change our minds about allowing the user to continue in a
supported mobile browser so preserve the source code that enables that
but give it more appropriate naming.
The files react/index.native.js and react/index.web.js ended up having
very similar source code related to initializing the Redux store. Remove
the duplication.
Additionally, I always wanted the App React Component to be consumed
without the need to provide a Redux store to it.
Simplify the source code (with the idea that source code which does not
exist does not have to be maintained).
Additionally, apply modifications to have the source code comply with the coding
style.
Overall, prepare saghul:audio-mode for merge into jitsi:master.
Recently, we reimplemented the Welcome page in React. Unfortunately, we
broke the checkbox that enables/disables the Welcome page and it would
allow checking but wouldn't allow unchecking.
Recently, we reimplemented the watermarks in React. Unfortunately, we
didn't take into account film strip-only mode.
Additionally, we duplicated watermark-related source code on the Welcome
and Conference pages.
A bug was discovered in d17cc9fa which would raise a failure to push
into the browser's history if a base href was defined. Fix the failure
by removing react-router. Anyway, the usage of react-router was
incorrect because the app must hit the server infrastructure when it
enters a room because the server will choose the very app version then.
The React-based rewrite looks whether there's a room name (in the
window's location) in order to choose between WelcomePage and
Conference. But app.js expects Conference to be rendered before it
builds a room name if WelcomePage is disabled and there's no room name.
A quick and dirty workaround is to render Conference within WelcomePage
so that the rendered result closely resembles index.html before the
React-based rewrite.
Don't use Array.prototype.sort() because (1) it operates in place and,
thus, mutes the Redux state and (2) it is not necessarily stable and,
thus, unnecessarily shuffles the thumbnails.
The audio levels are gathered by lib-jitsi-meet via polling of
RTCPeerConnection.getStats() which is very slow on Android. Since the
mobile app makes no use of audio levels, it is easiest to disable them
for now in order to not penalize the app.
The toolbar's mute buttons depict respective features/base/media states.
However, (un)muting is practically carried out by features/base/tracks.
When the mobile app enters a conference configured to invite the joining
participant to mute themselves, the tracks would be muted but the
toolbar's mute buttons would not reflect that.
Bundle our custom icon font jitsi.ttf in the Android app (which we
already do for the iOS app).
Additionally, remove icon font files which are not in use.
An error was discovered and fixed by GitHub user blackneck in
jitsi/jitsi-meet PR #1017. The faulty source code was a piece of
duplication though. Remove the source code duplication there to reduce
the risks of bugs.
jitsi/lib-jitsi-meet#66b601e disabled the execution of Temasys'
adapter.screenshare.js on browsers on which we don't use Temasys such as
React Native. Henceforth, no Temasys workarounds are necessary on React
Native.
As a step toward merging jitsi-meet-react with jitsi-meet to share as
much source code as possible between mobile and Web, merge the part of
jitsi-meet-react's source tree which supports mobile inside the
jitsi-meet source tree and leave jitsi-meet-react's Web support in the
source code revision history but don't have it in master anymore because
it's different from jitsi-meet's Web support. In other words, the two
projects are mechanically merged at the file level and don't really
share source code between mobile and Web.
As an intermediate step on the path to merging jitsi-meet and
jitsi-meet-react, import the whole source code of jitsi-meet-react as it
stands at
2f23d98424
i.e. the lastest master at the time of this import. No modifications are
applied to the imported source code in order to preserve a complete
snapshot of it in the repository of jitsi-meet and, thus, facilitate
comparison later on. Consequently, the source code of jitsi-meet and/or
jitsi-meet-react may not work. For example, jitsi-meet's jshint may be
unable to parse jitsi-meet-react's source code.
Leonard Kim
Bettenbuk Zoltan
hristoterezov
paweldomas
Guus der Kinderen
Saúl Ibarra Corretgé
Lyubo Marinov
Daniel Ornelas
Louis Chen
Ryan Peck
George Politis
Дамян Минков
Saúl Ibarra Corretgé
Boris Grozev
Emil Ivov
yanas
bbaldino
Saúl Ibarra Corretgé
bbaldino
Aaron van Meerten
Ilya Daynatovich
Любомир Маринов
Lyubomir Marinov
Ilya Daynatovich
Alexander Chernoshej