c4b66e7cd3
drc/drc_test_provider: Fix a crash due to code change, at least on Windows.
...
The new code has not a lot of change, and is a bit cleaner.
2020-09-16 11:46:16 +02:00
652a59b781
Fix null pointer use
2020-09-16 09:21:39 +02:00
75ffce1a0b
ADDED: Leader dimension object
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5555
2020-09-15 23:37:38 -04:00
b4229d9a3e
Fix testcase crash when progressReporter was null.
...
(And it helps if the DRC tester you're trying to test is actually
in the make file.)
2020-09-15 22:25:12 +01:00
6a7266d589
Only update DRC progress reporter if the reporter exists
...
The DRC engine might not have a reporter when run headless
2020-09-15 21:18:58 +01:00
b6a8e165c3
Don't allow schematic/pcb DRC tests when in standalone mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5635
2020-09-15 21:14:11 +01:00
e2e229da96
Finish exorcising the old DRC system.
...
This moves the various BOARD_ITEM calls to the new system, and make
the DRC_ENGINE long-lived so that it can field those queries.
2020-09-15 20:15:46 +01:00
aa7e021bfc
Remove translated null strings
...
Also improves translatability by separating clauses
2020-09-15 08:35:09 -07:00
665212341d
Cleanup (consistent naming, 100-char line width, message precision).
2020-09-15 12:07:31 +01:00
514da2f886
Move DRC dialog to new DRC engine.
2020-09-14 22:39:36 +01:00
52d9a47d5b
Fix endless loop in drc
...
Need to allow looping to negative when decrementing
2020-09-14 12:25:25 -07:00
ff0a728753
Fix a few I18N issues.
2020-09-14 10:02:07 +02:00
748bee1bc7
Hook up netclasses and board minimums to new DRC engine.
...
Improves implicit rule reporting.
Makes some internal names more consistent.
Moves DRC_REPORT to the test framework.
Removes priority (which isn't supported in the grammar)
2020-09-13 17:08:24 +01:00
d47d119d5f
Compile layer test into CONSTRAINT_WITH_CONDITIONS.
...
Also processes constraints in correct order for priority (reversed)
and removes multiple-expression-conditions for a single constraint
(which is not supported in the grammar).
2020-09-13 17:08:24 +01:00
8420fcc33b
Cleanup.
2020-09-13 17:08:24 +01:00
5d9301d394
Adjust isErrorLimitExceeded so it can be used for severity==IGNORE.
2020-09-13 17:08:24 +01:00
1aa38b8f82
drc_rule.cpp: avoid crash with a incorrect (broken or too old?) drc_rule file.
...
The crash was due to a null pointer not tested.
2020-09-12 11:26:53 +02:00
5be887a60f
Iron out some wrinkles in the DRC migration.
2020-09-12 01:57:37 +01:00
8ac7288696
Fix a crash bug loading DRC rules.
...
Also moves the clearance report to the new DRC engine.
2020-09-12 00:46:55 +01:00
ce2937a399
Move rest of DRC tests to kicad.
2020-09-11 23:14:12 +01:00
5424d6fa09
Move new clearance tests into kicad.
2020-09-11 21:26:57 +01:00
965a32077d
Fix compile error
2020-09-11 08:40:36 -07:00
cc86630f11
Start pulling new DRC engine into Kicad.
2020-09-11 16:04:11 +01:00
6b4a6f4d3e
Restore min seg limit for rounded-corner pads.
...
It suffered from a cacophony of errors, starting with an errant
comment that made it later look like a bug. Sigh.
2020-09-11 14:41:45 +01:00
e2bc7557cc
Clean up arc/circle polygonization.
...
1) For a while now we've been using a calculated seg count from a given
maxError, and a correction factor to push the radius out so that all
the error is outside the arc/circle. However, the second calculation
(which pre-dates the first) is pretty much just the inverse of the first
(and yields nothing more than maxError back). This is particularly
sub-optimal given the cost of trig functions.
2) There are a lot of old optimizations to reduce segcounts in certain
situations, someting that our error-based calculation compensates for
anyway. (Smaller radii need fewer segments to meet the maxError
condition.) But perhaps more importantly we now surface maxError in the
UI and we don't really want to call it "Max deviation except when it's
not".
3) We were also clamping the segCount twice: once in the calculation
routine and once in most of it's callers. Furthermore, the caller
clamping was inconsistent (both in being done and in the clamping
value). We now clamp only in the calculation routine.
4) There's no reason to use the correction factors in the 3Dviewer;
it's just a visualization and whether the polygonization error is
inside or outside the shape isn't really material.
5) The arc-correction-disabling stuff (used for solder mask layer) was
somewhat fragile in that it depended on the caller to turn it back on
afterwards. It's now only exposed as a RAII object which automatically
cleans up when it goes out of scope.
6) There were also bugs in a couple of the polygonization routines where
we'd accumulate round-off error in adding up the segments and end up with
an overly long last segment (which of course would voilate the error
max). This was the cause of the linked bug and also some issues with vias
that we had fudged in the past with extra clearance.
Fixes https://gitlab.com/kicad/code/kicad/issues/5567
2020-09-11 11:23:49 +01:00
fc1665ff28
ADDED Clearance Inspector.
2020-09-10 20:58:38 +01:00
e782794f96
Flesh out object properties and DRC Rule syntax help.
2020-09-05 17:44:59 +01:00
f1f8f746f4
Also resolve worksheet textVar refs in DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5506
2020-09-04 21:55:10 +01:00
ec576b5dfa
DRC checks need to be done on current layer.
...
Don't be fooled by the name "segment". It might be a via which is
on multiple layers....
Fixes https://gitlab.com/kicad/code/kicad/issues/5503
2020-09-04 15:05:03 +01:00
007580c4b8
ADDED pad:pin checks for DRC "Test footprints against schematic".
2020-09-04 14:07:42 +01:00
d1006138fd
ADDED holeWallPlatingThickness to AdvancedCfg.
...
Used for zone filling and DRC hole collision testing. Allows us to
calculate the actual hole size from the finish hole size.
Fixes https://gitlab.com/kicad/code/kicad/issues/5468
2020-09-03 16:00:07 +01:00
38e9217d54
Consolidate all DRC epsilon/threshold values to a single advancedCfg setting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5464
2020-09-03 15:03:09 +01:00
9a8dd6312b
Fix formatting.
2020-09-03 15:03:09 +01:00
4e885990b8
Don't keepout a keepout's own footprint.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5371
2020-08-28 11:05:58 +01:00
aa84bd6283
Use the right sign when dealing with the clearance epsilon.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5313
2020-08-22 20:03:46 +01:00
f95651841e
Report all extra footprints, even if they're duplicates.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5303
2020-08-22 16:20:18 +01:00
93ef18d775
Fix typo where two footprint warning messages were transposed.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5303
2020-08-22 16:20:18 +01:00
ade7f529b8
Switch shared_ptr creation to using make_shared
2020-08-16 12:37:50 +01:00
ec5040aff5
Fix missing 'else' and EOF processing, both of which cause crashes.
2020-08-14 22:11:04 +01:00
519bc80394
Replace error reporting in DRC rule compiler.
2020-08-13 18:47:41 +01:00
e907e43bd9
pcbnew/drc: post-rebase fixes
2020-08-13 14:50:59 +02:00
d937fadd6f
Migrate RC_ITEM to use shared_ptr
2020-08-13 14:50:59 +02:00
0c9d08249f
Fix crash where dummy edge doesn't have a valid parent.
2020-08-13 00:07:59 +01:00
393bb0fd83
Fix assert where geometry routine wasn't ready to handle layers.
...
This introduces layer handling to a lot of the geometry routines.
Many of them don't do much with it now, but it does help multi-layer
zones and will help when padstacks are implemented.
2020-08-12 22:20:08 +01:00
463100d67f
Remove a long-standing hack to keep divots out of adjacent zones.
...
The new algorithm unions any adjacent zones before doing the
chamfer/fillet and then subtracts the other zones back out afterwards.
Fixes https://gitlab.com/kicad/code/kicad/issues/3812
2020-08-12 22:20:08 +01:00
2c8d20207e
Allow micro-via to begin/end in middle layers
...
Microvias can be drilled through adjacent layer pairs, not just F_Cu and
B_Cu
2020-08-10 03:27:27 +00:00
41edf5c5bf
Updating DRC to handle vias with differing layers
2020-08-10 03:27:27 +00:00
5fc6b74c89
ADDED: Remove unused pads
...
This option removes copper layers from pads and vias where they are not
connected to other board elements. This allows the inner layers to be
more closely routed if the via landing pad is not needed.
Fixes https://gitlab.com/kicad/code/kicad/issues/1835
2020-08-10 03:27:26 +00:00
9b3ff5af47
Fix a few I18N issues.
...
Especially keywords should not be included in translated strings.
2020-08-09 20:38:35 +02:00
c6e388db14
Implement an app progress indicator in the taskbar
...
ADDED: Progress indicator in the taskbar
This adds a progress indicator to the Windows and macOS taskbar
icons to display the progress of some operations.
Note, this requires wxWidgets 3.1+
2020-08-09 10:55:00 +00:00
02bf5d27df
Fix crash when a DRC rule specifies an empty zone as a keepout.
2020-08-08 16:25:30 +01:00
db501c2002
Fix issue with doing DRC on a multi-layer zone.
...
Testing for an intersection of layers between the zone and the
item (track in this case) isn't enough: we need to test for the
presence of the item on each layer of the zone.
Fixes https://gitlab.com/kicad/code/kicad/issues/5102
2020-08-07 22:40:18 +01:00
1671c3356d
Fix typo where "continue" got put on wrong side of closing brace.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5100
2020-08-07 22:40:18 +01:00
e5b50d90a7
Update DRC rules to new layer and disallow grammars.
...
Also adds support for hooking rules up to named zones.
Fixes https://gitlab.com/kicad/code/kicad/issues/2041
2020-08-07 21:49:36 +01:00
f27661fa39
Be more flexible with user input; more multibyte safety.
2020-08-06 19:38:06 +01:00
9c9fdb2569
More performant (and more correct) deletion of DRC markers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5057
2020-08-04 11:45:07 +01:00
c56599ab07
Allow ERC/DRC markers to be deleted without deleting exclusions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4953
2020-08-02 22:45:48 +01:00
6d319e5bf7
Both pads must have nets to be shorting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5047
2020-08-02 17:05:13 +01:00
fdb23d1a2d
Add DRC check for items (pads for now) shorting two nets.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4955
2020-07-30 21:42:23 +01:00
577c1be391
Report all DRC rule errors, not just the first.
2020-07-30 14:27:42 +01:00
5a1b1c544a
Add layer to rule grammar.
2020-07-30 14:27:42 +01:00
89a953e039
Migrated GetEffectiveShape(s) to SHAPE_COMPOUND
2020-07-29 23:14:03 +02:00
0fecb5f277
Be more explicit about string/character conversions.
...
This *may* fix the bug where a layer name isn't displayed correctly
in the error dialog. But probably not.
2020-07-28 20:44:40 +01:00
bf445c1a95
Performance enhancements.
...
1) cache pad polygon outlines
huge improvement in connectivity performance and a decent
improvement in DRC performance
2) don't pre-allocate CONTEXT stack
significant improvement in DRC rule performance
2) don't keep re-encoding strings
decent improvement in DRC rule performance
2020-07-25 13:03:33 +01:00
f97c50bfde
Give excluded DRC items their own layer.
...
(And fix a bug with the new mulit-layer zones and rule-based keepouts
at the same time which prevented me from testing it.)
Fixes https://gitlab.com/kicad/code/kicad/issues/4954
2020-07-24 01:28:25 +01:00
6529e339a9
Don't store context in the uCode. (It's not thread-safe.)
...
Although it does give some pretty funny results when filling zones.
2020-07-23 22:21:13 +01:00
a6b6084a60
Add preflighting for DRC rule function calls.
2020-07-22 14:33:32 +01:00
c52df811ae
Add expression eval to constraint min/max/opt values.
...
Also adds error reporting for above.
2020-07-21 23:43:10 +01:00
095937563b
Hook libeval compiler up to rule parser
...
- convert expression string tokens to single-quote-delimited
- fix bug where netclass assignments weren't getting updated after
board setup dialog
- move property manager rebuild to lazy evaluation
- improve performance with wider use of const&
- retire DRC_SELECTOR stuff
- use wxString for GUI stuff (particularly translated stuff)
- fix EqualTo() to return false instead of asserting when op types
don't match
- fix buffer overruns with fixed-size string buffers
- make expression function calls case-insensitive
- integrate expression errors into rule parser
- produce more and better error messages
- keep BOARD_ITEM ptrs const as long as possible
- fix a couple of uninitialized variables
2020-07-20 22:11:53 +01:00
998c216487
Remove some nag tests which keep you from doing a DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4845
2020-07-09 16:22:59 +01:00
5226d6b4df
libcommon build: add NGSPICE_INCLUDE_DIR in include list (similar to Eeschema build).
...
Useful when ngspice is build by the developer in a specific folder.
Fix also an other minor compil warning.
Fixes #4851
https://gitlab.com/kicad/code/kicad/issues/4851
2020-07-09 08:46:59 +02:00
d85a707385
Move rest of DRC to SHAPE collision architecture.
2020-07-06 20:00:50 +01:00
2a1550d1d2
Don't crash when failing to deserialize old exclusions
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4820
2020-07-06 12:53:55 -04:00
0d8c6d43a8
fix minor I18N issues.
2020-07-06 13:47:42 +02:00
8ffa86a63f
get it to compile after rebase
2020-07-05 22:44:38 +02:00
8bb442ac37
pcbnew: try to compile 'old' DRC alongside the new prototype
2020-07-05 22:44:38 +02:00
12b4a55ae8
Port Eeschema to new project settings
...
DRC/ERC error serialization changed to use explicit tokens
Old stored severities and ignored errors are discarded
2020-07-02 22:08:54 -04:00
c0aa6965de
Migrate PcbNew project settings to new framework
...
Various architecture upgrades to support this.
Creating a BOARD now requires a valid PROJECT, which caused
some (mostly transparent) changes to the Python API internals.
ADDED: Project local settings file
CHANGED: Board design settings are no longer stored in PCB file
CHANGED: Net classes are no longer stored in PCB file
CHANGED: Importing board settings now reads boards, not just projects
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2578
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4070
2020-07-02 22:08:54 -04:00
441dfa30f0
Return individual custom pad shapes instead of a SHAPE_POLY_SET.
...
Also implements an optional pointer to return the actual distance
from all the SHAPE collision routines.
Fixes https://gitlab.com/kicad/code/kicad/issues/4774
2020-07-02 17:09:15 +01:00
424d551054
Cache pad bounding boxes for performance.
...
Also allows us to return to a LOD test for pad numbers which treats
round and square pads the same.
2020-07-01 16:57:00 +01:00
40a72d9530
Add SH_RECT handling to 3D shape conversion.
...
Also add some debugging for not-implemented shape cases in other
places to catch simmilar issues in future.
Fixes https://gitlab.com/kicad/code/kicad/issues/4757
2020-06-30 18:32:31 +01:00
42296d7eb9
fix issues in DRC and fill zone, related to recent changes in code.
...
Note also: the actual clearance between 2 pads when < minimal clearance
is incorrectly calculated.
2020-06-30 12:59:26 +02:00
0d4ee39f75
CHANGED: Copper zones can be on more than one layer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1963
2020-06-28 08:52:37 -04:00
d01b29ab37
Cleanup pad geometry handling.
...
There were a lot of plotters, exporters, etc. that were rolling their
own implementations.
This also introduces a lazily-built set of SHAPE objects for doing
collision detection and some forms of rendering (and later DRC).
2020-06-22 22:28:37 +01:00
c57c21f577
Pad bounding radius is from pad centre, NOT shape centre.
2020-06-22 20:36:54 +01:00
7877e4083e
Don't match to an unknown layer.
2020-06-20 14:34:53 +01:00
32738862b8
Fix build error in linux
2020-06-18 09:52:04 -07:00
76d1b8bfa1
Make sure selectors match against user layer names.
...
Also allows for user specification of units in rule constraints.
2020-06-18 15:38:01 +01:00
a7703d1207
Cleanup Graphics to parallel Cleanup Tracks & Vias.
...
This also allows for easier migration to DRAWSEGMENT::S_RECTs by
auto-converting 4 rectilinear lines to a rectangle.
2020-06-17 18:44:39 +01:00
aeed8e6e2c
Finish implementation of DRAWSEGMENT::C_RECT.
...
It's currently only supported in the Footprint Editor. It could be
easily added to the board editor (all the code is there), but the board
editor is a little short on room in the drawing tools toolbar.
2020-06-15 20:51:31 +01:00
d7d877241a
More explicit type conversion to attempt to fix GCC compile issue.
2020-06-10 13:41:45 +01:00
4138c8554c
Parse DRC rules when closing Board Setup dialog.
2020-06-10 12:03:37 +01:00
f4d8c30f9a
Tighten DRC epsilon value until we decide what to do about it.
2020-06-04 18:28:48 +01:00
36d197d8b6
Increase pad clearance test epsilon to polygonization max error.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4604
2020-06-03 18:47:19 +01:00
d2cd4de280
Allow rules to operate on hole when hole-to-track testing.
2020-06-03 12:11:50 +01:00
6d5b6c8b81
A bit more refactoring to get code out of the DRC tool.
2020-05-29 22:06:48 +01:00
39ec63c4e9
Fix some inconsistencies in clearance priorities.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4555
2020-05-29 13:41:45 +01:00
9f2be3714f
Add unresolved variable testing for worksheet items.
2020-05-28 17:36:22 +01:00
e61185775f
Implement testCopperDrawItem() for POLYGON draw items.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4549
2020-05-26 23:48:21 +01:00
1db799d841
Implement "disallow" rules and integrate with keepout settings.
2020-05-25 22:51:47 +01:00
jean-pierre charras
Jon Evans
Jeff Young
Ian McInerney
Seth Hillbrand
Tomasz Wlostowski
Mark Roszko