0c3da0f072
Implement true arc collisions for arcs inside a SHAPE_LINE_CHAIN
2021-11-15 14:04:37 +00:00
d66487c383
Make sure RTree bounding box is at least as big as hole.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9526
2021-11-05 14:29:10 +00:00
64f77b3596
PNS: Add support for 90-degree corner modes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6902
2021-11-03 02:14:23 +00:00
29c3601061
SHAPE_POLY_SET: add FullPointCount(), mainly for statistics and debug.
2021-10-24 15:06:24 +02:00
9b9e379aa0
Overhaul arc internal model to not over-specify information.
2021-10-15 12:45:43 +01:00
9e557d84c6
Ensure appended arcs are valid arcs (start, mid, end cannot be collinear)
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9380
2021-10-13 18:58:21 +01:00
4b8ca18bf7
Remove unfinished code for handling arcs in SHAPE_POLY_SET::booleanOp
...
Boolean Ops on polygons with arcs are not supported (the only exception
is Simplify)
Also fix a bug in SHAPE_LINE_CHAIN::splitArc that resulted in an
exception
Partially fixes https://gitlab.com/kicad/code/kicad/-/issues/9380
2021-10-13 18:29:32 +01:00
c1e6fdfb47
Polygon triangulation: Check for broken remainders
...
If the last three points of a tesselation are concave, we will never be
able to triangulate them. They were likely formed from a bad polygon,
so we will drop the triangle and return completed
Fixes https://gitlab.com/kicad/code/kicad/issues/9380
2021-10-12 12:14:42 -07:00
52bbfb9109
Remove dependency of dot size on linear mils
...
Changes a dot to be a square pixel (linewidth x linewidth). This allows
the removal of IU dependencies and ensures that a dot is always visible
on screen. Also makes sure that cairo is setting the current linewidth
during its stroke routines
Fixes https://gitlab.com/kicad/code/kicad/issues/9362
2021-10-10 09:40:26 -07:00
f606679164
Proper numeric sorting for intersheet refs.
...
Also expunges the horrifically named std::remove and std::remove_if
(neither of which remove anything).
2021-10-01 18:29:21 +01:00
e2368b733c
Allow selection of NPTH pads with zero copper size
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9249
2021-09-26 18:17:50 -04:00
4abee7c2eb
Fix SHAPE_LINE_CHAIN::Split when inserting a point on an arc
...
Ensure the arc is split into two at the point specified.
Partly fixes https://gitlab.com/kicad/code/kicad/-/issues/9023
Additional work required to ensure that the shove state is preserved.
2021-09-26 15:15:51 +01:00
46949abe4a
Don't scroll to highlight an object already visible.
2021-09-25 15:31:52 +01:00
28bd734313
Prevent invalid paths in fracture
...
We are not always sure of the path validity in fracture. Nominally, the
Clipper Simplify routine should remove invalid parts but in the case
where it doesn't, we need to recover gracefully, even if the output
polygon is not valid.
Fixes https://gitlab.com/kicad/code/kicad/issues/9199
2021-09-21 10:49:39 -07:00
f64abcba36
Restore BBoxCache usage for zone fill performance.
2021-09-09 16:43:47 +01:00
ed39b33d74
Fix edge case in CIRCLE::Intersect that caused a divide-by-zero crash
...
Also add some additional test cases.
2021-08-25 19:11:19 +01:00
80355f04a9
Fix SHAPE_LINE_CHAIN::Replace at end of chain
2021-08-13 16:59:45 -04:00
d9cf939ba1
SHAPE_LINE_CHAIN::Replace Don't call front() or back() if empty
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8949
2021-08-12 16:32:06 +01:00
ab3564f12d
Fix formatting in prior commit
2021-08-11 17:40:23 +01:00
22df01183d
Fix edge cases in CIRCLE::Intersect that were causing KiROUND overflow
2021-08-11 17:31:27 +01:00
11fc74920c
Fix infinite loop in SHAPE_LINE_CHAIN::Slice
...
Was resulting in infinite loop due to wrong calculation
in NextShape.
2021-08-09 21:10:33 +01:00
ae87dc686a
Fix SHAPE_LINE_CHAIN::NearestPoint when aAllowInternalShapePoints=false
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8770
2021-08-08 20:58:20 +01:00
1edb96cc5b
Fix SHAPE_LINE_CHAIN::Slice(), splitting arcs when required
2021-08-08 19:09:54 +01:00
eaf8eb284a
Add true arc-to-polyline collisions
2021-08-05 17:45:12 +01:00
dd65ce9523
Simplify & move new arc collision code into Kimath library
...
Don't need to check intersections with the circle, just fix the
calculated "projected" point from the end points.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8234
2021-08-05 17:45:12 +01:00
b6be10f05c
Fix CIRCLE::Intersect( const SEG& aSeg ) and add unit tests
2021-08-05 17:45:12 +01:00
318435aedb
Add more test cases: simulate zone fill around arc + diff pair meander
2021-08-05 17:45:11 +01:00
b6664eecf2
arc: fix incorrect arc center calculation for angle < 0 or > 180 deg
2021-08-05 18:15:55 +02:00
c00f4ed5d2
Add regression tests for track cleaner.
2021-08-03 16:17:18 +01:00
3a833debea
ShapeToPolygon: implement negative inflation
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8859
2021-07-28 10:37:56 +00:00
78e5e98ea0
Pass VECTOR2I objects by reference instead of on the stack.
2021-07-27 08:41:27 -04:00
8fd83cbb95
Pass wxPoint objects by reference instead of on the stack.
2021-07-26 15:35:33 -04:00
4760480f40
Quiet compiler warnings.
2021-07-22 13:03:17 +01:00
937e4b1d8c
ShapeToPoly: Fix outline/arc intersection for large expansions
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8820
Adds shortcut code path for 90deg corners
Segments are now actually symetrical
Refactored and commented the code
2021-07-22 11:53:08 +00:00
4c457b5ed3
More NULL expunging.
2021-07-18 14:31:55 -04:00
25e9d17722
Fix a boost compatibility with old boost versions.
...
(replace boost::optional::has_value() by its definition is_initialized())
2021-07-16 14:01:26 +02:00
8b3ccab0a3
Implement explicit polygon construction for most pad shapes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8650
2021-07-13 14:51:58 +00:00
54b6f51633
DSN export: export RECT and ARC shapes (on silkscreen layer) from footprints
...
Also export arc track segments as lines. (Freerouter does not support QARCs)
Fixes #8769
https://gitlab.com/kicad/code/kicad/issues/8769
2021-07-11 18:15:40 +02:00
ec64e8ad5b
TransformRingToPolygon(): fix incorrect approximation of the hole.
2021-07-06 13:59:05 +02:00
72435c78af
Fix out of bounds crash in SHAPE_LINE_CHAIN::splitArc
...
Check that the index references a point that is part of an arc
2021-07-05 20:29:24 +01:00
515669284a
convert_basic_shapes_to_polygon: some enhancements:
...
- allows setting a minimal seg count for circles and rounded end segments.
- When using ERROR_OUTSIDE, ensure the arc correction is the actual value
needed by the segment count, not the max value allowed
2021-07-05 17:46:02 +02:00
3103ff9aa3
Fix display of filled polygons with arcs in the outline
2021-07-04 12:10:59 -04:00
ddc20dadc0
Formatting and spelling tweaks
2021-07-03 15:43:40 -04:00
cee5920d5c
Remove dead code (SHAPE_LINE_CHAIN::DetectArcs)
2021-07-03 19:37:50 +00:00
778c64de88
Implement ClearArcs() and check curved polys don't get a booleanOp
...
We cannot (yet) support passing several curved outlines through clipper.
In these cases, the caller should ClearArcs() before processing.
2021-07-03 19:37:50 +00:00
260a9d0540
Use ZFillFunction to modify arcs post clipper (does not fully work yet)
...
Added a unit test to verify union and intersection of polygons result
in desired results: subject + clip - intersect == union
2021-07-03 19:37:50 +00:00
437e2783fb
Use Clipper Z value to detect arcs post clipper
2021-07-03 19:37:50 +00:00
a9a8aa8243
SHAPE_LINE_CHAIN splitArc on Insert, Remove and Replace
...
This ensures that the arc shapes remain correct after removing
a point belonging to an arc or inserting a point in the middle
of an arc.
Simplify implementation of Replace( ..., aP ). Now a Remove
operation followed by an Insert operation.
Improve QA test for SHAPE_LINE_CHAIN Append, Insert and Replace
Implement SHAPE_LINE_CHAIN::splitArc to break up an arc into two
Implement SHAPE_ARC::ConstructFromStartEndCenter and add qa test
2021-07-03 19:37:50 +00:00
3f73d8c2b5
SHAPE_LINE_CHAIN::Area() should always be positive
...
The algorithm relied on the assumption that the points were
ordered anti-clockwise. When ordered in a clockwise fashion, the
result was correct but negative.
Refer to https://www.mathopenref.com/coordpolygonarea2.html
for more information.
2021-07-03 19:37:50 +00:00
c3051ba48a
Refactor SHAPE_LINE_CHAIN to allow two shapes per point
...
m_shapes now has two possible indices. The first one is populated if
the point is associated with an arc and the second index is populated
if the point is shared between two arcs.
2021-07-03 19:37:50 +00:00
c1361ae173
SHAPE_POLY_SET: Detect arcs after boolean operations
2021-07-03 19:37:50 +00:00
3ee8b4825c
Implement SHAPE_LINE_CHAIN::DetectArcs and add qa test
2021-07-03 19:37:50 +00:00
14c3d9055e
Add CIRCLE::Contains( VECTOR2I aP ) and add unit tests
2021-07-03 19:37:50 +00:00
a28d9f17e8
WIP
2021-07-03 19:37:50 +00:00
8521deb38d
De-scope ClipperLib namespace
2021-07-03 19:37:50 +00:00
6c224156f5
Adding conversion from points to arcs
...
Allows detection of arcs from segments in a SHAPE_LINE_CHAIN, converting
them to SHAPE_ARCs in the chain
2021-07-03 19:37:50 +00:00
5b2be906b8
Removing CLIPPER poly support
2021-07-03 19:37:50 +00:00
4f4deece6d
ADDED support for reading/writing arcs in polys
...
This adds support for reading and writing arc elements in polygons.
2021-07-03 19:37:50 +00:00
eff75b630f
Get rid of anonymous struct typedefs
...
We are using C++14 where there is no reason for this and is banned in C++20 under P1766R1. MSVC generates a warning under C++14 as a reminder.
2021-07-01 18:28:41 -04:00
507a88524a
KiCad internal library header file housekeeping.
2021-07-01 13:46:38 -04:00
175b474c3e
Coverity issue fixes.
...
Fixes issues #280412 , #314755 , #329615 , #332459 , #332157 , #332167 ,
2021-06-30 18:08:49 -04:00
17737af130
Fix some issues related to SHAPE_ARC:
...
- Some are related to shape errors when the allowed error to approximate circle
by segment is large and arc radius small.
- fix the actual error used in ConvertToPolyline().
- Use SHAPE_ARC::DefaultAccuracyForPCB() instead of a fixed value as extra margin
in zones. It should not change something, because it is also a fixed value
(5 micrometers), but it is not a magic number.
-TransformArcToPolygon() fix some issues and add a new algo, based on the arc actual
outline shape (initial algo is still available in code, just in case).
2021-06-30 13:33:49 +02:00
bcb5618315
Fix incorrect calculation in TransformCircleToPolygon(), only noticeable
...
when the allowed aError is (unusually) large.
2021-06-28 18:51:37 +02:00
fa49b54f93
Fix minor issue in TransformCircleToPolygon() when aError is set to a large value.
...
pcb_painter.cpp: add (but not activate) compil option to show the conversion
of SHAPE_ARC::ConvertToPolyline as segments, for debug purposes.
2021-06-28 15:50:16 +02:00
9a865b1989
Fix a typo and a minor compil warning
2021-06-28 14:37:35 +02:00
310adedf85
Add GetCircleToSegmentError() to geometry/geometry_utils.
...
This function returns the error created by a circle to segment approximation.
2021-06-26 18:57:07 +02:00
3c81403424
Refinements in Arc to Polygon transform: slightly better shapes of arc ends.
...
Note also the transform is still not good: the same parameters are applied
to convert inner arc, outer arc and middle arc of a thick arc to segments.
But these parameters depend on arc radius (or circle radius) value.
2021-06-26 14:20:55 +02:00
31d7a0a8d1
TransformArcToPolygon(): slightly better approximation of arc.
...
The error between the "right" shape and the polygon is slightly smaller.
The approximations of the inner arc and the outer arc are better, but not perfect.
Also add (for test and debug purpose only) the code to show the polygon when
drawing a PCB_ARC (currently disabled)
2021-06-25 18:46:16 +02:00
1d6ad4a52a
SHAPE_ARC::ConvertToPolyline(): fix ugly approximation for some arcs.
...
Arcs with small radius can be approximated with very few segments.
However, if the thickness is large, relative to the radius, the approximation
must be based on the external radius, not the arc radius.
The difference can be significant.
This is especially noticeable for these graphic arcs in filled zones.
2021-06-23 18:30:02 +02:00
a04d6401c1
Transform arcs more accurately
...
Segment approximation for arcs leaves small "indents" where the rounded
edges of two segments don't quite meet.
This gives closer approximation by calculating the inner and outer joint
points based on the radius, eliminating the indents.
2021-06-11 14:26:38 -07:00
f968fc8719
Fix source comment / documentation typos
2021-06-09 19:32:58 +00:00
ffa87e69c6
Remove/replace some stdint.h includes
2021-06-08 21:17:57 -04:00
53a75a4961
Fix actual-clearance handling in arc collision routines.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8407
2021-06-03 18:33:59 +01:00
976e756b02
Formatting.
2021-06-03 18:33:59 +01:00
059f79dfdb
Re-remove KiROUND from header
...
Moves routines requiring KiROUND (and util.h by extension) to the cpp
file
2021-06-03 08:44:17 -07:00
29783f125b
Eliminate one wxRect constructor in BOX2
...
The only usage auto converted to BOX2D anyway...
2021-06-03 01:27:15 -04:00
cf1c75ecd4
Handle rounding errors in seg length calculation
...
SQRT needs to be passed through KiROUND before returning otherwise,
truncation errrors will accumulate between routing and DRC
Fixes https://gitlab.com/kicad/code/kicad/issues/8541
2021-06-02 16:42:35 -07:00
c294d28275
Split POLY_GRID_PARTITION to a cpp file
...
Not entirely a lightweight class
2021-06-02 18:31:30 -04:00
13abb9f947
Shift some seg functions to the cpp file
2021-06-02 18:31:30 -04:00
b6de4da686
Fix compatibility with wxWidgets 3.0.x
...
Fixes #8533
https://gitlab.com/kicad/code/kicad/issues/8533
2021-06-02 10:02:20 +02:00
0b4a680dbb
Hotglue wxLogDebug into math/util.h without the global include
2021-06-02 00:26:16 -04:00
cf2bb5692a
Remove the wxLog calls from math/util.h for now
...
This was leaking windows headers and partial wx headers to 1084 compilation units......
This also means math/util.h is leaking to 1084 compilation units which seems a bit high too.
2021-06-01 18:44:22 -04:00
46d746c9da
Performance optimizations.
2021-06-01 23:11:54 +01:00
2d8264124d
geometry: SHAPE_LINE_CHAIN::PathLength() now can accept the maximum index of the segment to calculate the length to
2021-05-29 00:13:24 +02:00
7553b7b092
geometry: add minimum distance threshold parameter to SHAPE_LINE_CHAIN::Find()/FindSegment()
2021-05-29 00:13:24 +02:00
b3fb7190df
geometry: SEG::Contains() should use Distance(), not SquaredDistance() for correct rounding
2021-05-29 00:13:24 +02:00
e7fe8c4ddb
geometry: rework SHAPE_LINE_CHAIN::Intersect() to explicitly indicate touching vertices and remove references to SEGs from INTERSECTION structure
2021-05-29 00:13:24 +02:00
f30ebbde33
Fix accuracy of tuning path calculation when measuring arcs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8401
2021-05-10 21:22:51 -04:00
715c61ac9f
PNS: Fix yet more arc edge cases
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8150
2021-04-12 19:59:55 -04:00
1c431d9929
PNS: Fix some off-by-one errors with arc dragging
2021-04-11 22:12:53 -04:00
f5ef60c2f2
PNS: Fix shoving segment after arc
2021-04-11 18:06:21 -04:00
a26fc6d65d
PNS: Fix several issues with arc dragging
...
Do not merge vertices that belong to different arcs
Fix start segment identification after arcs
Fix free-angle drag after arc
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8173
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8150
2021-04-11 17:56:40 -04:00
258fd07939
Fix a compil issue (at least on msys2)
2021-04-11 17:32:40 +02:00
7ba110bd77
PNS: Fix dragging of segments with arcs in line
2021-04-11 10:18:57 -04:00
a30894e5a1
Allow SHAPE_LINE_CHAIN and SHAPE_ARC to be mirrored using a SEG
2021-04-11 13:27:25 +00:00
e04c820442
Formatting.
2021-04-09 14:02:13 +01:00
b7bd7246af
SHAPE_LINE_CHAIN::Split: Add integers before incrementing the iterator
...
Partially Fixes https://gitlab.com/kicad/code/kicad/-/issues/8131
2021-04-07 11:28:02 +00:00
235688e459
Less restrictive Arc Track Dragging tool
...
Use the connecting straight tracks even if not exactly parallel - allow
an error margin configurable in ADVANCED_CFG (default 1 degree). Also
be less strict about end point matching and use the width of the track
as the criteria to determine suitability.
Finally, delete any short lengths of track at the end of the operation
and amend the arc end points to keep connectivity.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7967
2021-04-06 12:52:01 +00:00
1632707d9b
Replace tabs with spaces
2021-04-05 01:13:39 +00:00
2c05d99d9f
SHAPE_POLY_SET: Fix segment collision testing
...
It appears as though there was an optimization to skip testing segments if
one of their endpoints (and only the A point) was inside. Unclear the reason
for this, but I'm going to assume that it was intended to optimize the case
where both points are inside (like the point case above it).
2021-04-04 20:12:45 -04:00
5bc1e55272
SHAPE_LINE_CHAIN: Don't crash if inserting point at the end
2021-04-04 19:38:54 -04:00
bd6539885b
Fix SHAPE_POLY_SET::SquaredDistanceToPolygon ignoring aNearest if unlucky
2021-04-04 19:38:54 -04:00
b6f2941a06
Another try a allowing touching courtyards.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8076
2021-03-31 22:54:30 +01:00
f1c599fa4d
Tweak PCB selection behavior to reduce unintuitive behavior
...
We were discarding shapes too aggressively for having a
larger area than a shape underneath.
Let's also try showing fewer disambiguation menus, in particular
always preferring items on the active layer when the candidates
include overlapping items of similar area on other layers.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7949
2021-03-20 13:11:51 -04:00
e4b99b9bb5
Fix SHAPE_ARC::Collide and add Unit Tests
2021-03-20 16:11:43 +00:00
e2aa7be4b3
Added a lot of consts and refactored a few lines
2021-03-08 12:49:48 -08:00
0f22b54cd8
Clip the leader lines properly when using circular text frame
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7810
2021-03-07 21:19:19 +00:00
87ea540953
Fix whitespace errors
2021-02-25 17:18:23 +01:00
f7f5e67f56
geometry: SHAPE_LINE_CHAIN::Simplify() now correctly simplifies last 3 colinear vertices
2021-02-25 17:18:23 +01:00
baacb9c85a
geometry: fix MTV calculation for simple polygons
2021-02-25 17:18:23 +01:00
e89f9db438
Footprint disallow layer checking needs to be based on courtyards.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7620
2021-02-20 14:13:36 +00:00
2d66abdc89
CADSTAR PCB Archive Importer: More improvements to loading of zones
...
Adds a new function Area() to SHAPE_POLY_SET
2021-02-10 18:49:21 +00:00
872184fe8b
Revert "Bump minimum required CMake version to 3.10"
...
This reverts commit a475f45753
2021-02-09 18:46:13 -05:00
a475f45753
Bump minimum required CMake version to 3.10
...
This allows us to remove even more workarounds
2021-02-08 12:23:08 +00:00
90b3d0c96d
Implement TransformShapeWithClearanceToPolygon for DIMENSIONs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6890
2021-02-03 23:34:17 +00:00
73886aecb1
Ensure partially triangulated polys are not valid
...
Moves rule area triangulation outside of layer iterator and keeps the
triangulation_valid flag false until the triangulation has been
completed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7032
2021-01-29 16:33:57 -08:00
6ab1144ea3
Fix broken Doxygen comment specifiers.
...
Please note, ///> is not a valid Doxygen comment specifier. ///< is the
correct specifier to use for single line or short Doxygen comments.
2021-01-25 07:42:36 -05:00
99d203feae
Clarify CIRCLE::ConstructFromTanTanPt
...
Remove unused bool aAlternateSolution and add doxygen comments
2021-01-24 16:41:11 +00:00
48823c0723
Formatting fixes and fix qa_kimath following rebase
2021-01-24 16:41:10 +00:00
19620cebe7
qa tests: fix test_circle
2021-01-24 16:41:10 +00:00
6ed5ed52b8
qa tests for CIRCLE geometry library
2021-01-24 16:41:10 +00:00
b6a50d2f74
qa tests for SEG perpendicularity and parallelism
2021-01-24 16:41:10 +00:00
6e7ae93cc8
EDIT_TOOL::DragArcTrack Fix incorrect undo history when items are deleted
...
Need to make sure we only apply one COMMIT operation per object before calling COMMIT::Push() or COMMIT::Revert()
2021-01-24 16:41:10 +00:00
2b5c1bae97
CHANGED: Dragging a curved track starts an interactive resizing of it, keeping start an end points tangent
2021-01-24 16:41:10 +00:00
b8dfcb34c4
Revert "Use less-sophisticated arc editing math."
...
This reverts commit 3b424d3868
2021-01-18 12:44:27 -08:00
00a9910149
Fix misplaced parenthesis in VECTOR2<T>::Resize()
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7045
2021-01-16 09:41:14 +00:00
dc02ec9758
Remove a few const_cast
2021-01-12 20:51:31 +00:00
ac94d72d2d
Add more const specifiers
2021-01-12 20:51:31 +00:00
7994c59169
libs/kimath: POLY_GRID_PARTITION must use truncating (round-to-zero) rescale function for correct grid generation.
2021-01-10 00:04:57 +01:00
b2cfd7f479
Fix rounding issues
...
Rescaling and rotating has been leaving 1nm errors due to integer
truncation in VECTOR2I. This rounds integers using KiROUND before
returning
2021-01-09 13:05:58 -08:00
31dd04fa96
Fix ToVector to return world coordinates
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7002
2021-01-08 13:52:39 -05:00
c3eb8dccda
Fix typo in DIRECTION_45 ctor
2021-01-07 19:13:05 -05:00
a342bb9ab3
Standardize rounding in 64-bit rescale
...
32-bit rescale still uses truncation until we can determine how this
affects poly_grid_partition
2021-01-07 11:21:05 -08:00
77acf85310
Revert "Standardize rescale"
...
poly_grid_partition appears to depend on integer calculation for large
scaling
This reverts commit eef16fe717
2021-01-07 10:36:06 -08:00
6ca9a42251
Removes 3 other instances of a potential encoding problem
...
Signed-off-by: hoijui <hoijui.quaero@gmail.com>
2021-01-07 17:36:49 +00:00
e34b829242
Prevent an encoding error when generating python API DoxyGen
...
Signed-off-by: hoijui <hoijui.quaero@gmail.com>
2021-01-07 17:36:49 +00:00
0234b7278a
PNS: Make DIRECTION_45 North be up everywhere
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
2021-01-06 21:47:06 -05:00
eef16fe717
Standardize rescale
...
Rescale was returning differing results based on 32-bit vs 64-bit
implementations. Speed difference here appears to be positive.
2021-01-06 17:52:14 -08:00
2a088e5c7b
Add conversion of circles to zones and enable in footprint editor.
...
Also rule areas, of course.
Fixes https://gitlab.com/kicad/code/kicad/issues/6966
2021-01-06 17:21:49 +00:00
7431d5c985
PNS: First pass at updating meander placers for arcs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6464
2021-01-05 17:57:21 -05:00
8619086cf2
PNS: re-enable optimization of colinear segs in lines with arcs
2021-01-05 17:57:21 -05:00
8901e71fc8
PNS: Fix loop removal, make walkaround less broken for arcs
2021-01-05 17:57:21 -05:00
aebb571dc9
Short-circuit arc generation if we are on a diagonal
2021-01-05 17:57:21 -05:00
5a97764319
Make segment contain its edge
...
This allows segment snapping along its diagonals to the grid.
Fixes https://gitlab.com/kicad/code/kicad/issues/6924
2021-01-03 12:47:33 -08:00
eaffacbc85
PNS: construct initial lines with arcs more precisely
2021-01-02 23:57:09 -05:00
af4c6393bb
Fix arc collisions to account for width
...
This was causing arcs to be really hard to start routing from
2021-01-02 22:01:05 -05:00
73248ab219
PNS: correct initial segment direction for posture solver
2020-12-31 13:05:43 -05:00
111c644a82
Don't append zero-length arcs
2020-12-31 13:05:43 -05:00
fbdf31d35a
Prevent creating arcs with slightly offset endpoints
2020-12-31 13:05:43 -05:00
23c9eddf2d
Cleanup
2020-12-30 18:29:41 -05:00
79502a0d88
PNS: A new approach to arc placement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6334
2020-12-30 18:23:24 -05:00
af2219ba7f
Finish implementation of hole clearance checking.
...
It appears we never did via hole testing, and pad hole testing didn't
appear to get much testing.
2020-12-25 22:32:19 +00:00
ea351fde69
Recache polygon triangulation when mirroring
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6265
2020-12-20 10:45:24 -05:00
bc484784fc
Make sure zones are triangulated for DRC.
...
Normally this happens as a side-effect of rendering them but if done
from a script (or test case) this won't happen.
Fixes https://gitlab.com/kicad/code/kicad/issues/6635
2020-12-12 15:27:46 +00:00
f08b7f098f
Cleanup.
2020-12-12 15:27:46 +00:00
807eef1208
Better error reporting to try and catch 6635.
2020-12-12 12:22:52 +00:00
2c2630ef9e
Formatting.
2020-12-12 03:43:41 +00:00
be4b6ec06a
Cleanup compiler warnings
2020-12-09 23:13:33 +00:00
37178e3751
Formatting.
2020-11-29 14:02:46 +00:00
68625494f3
specctra_export: fix an issue with custom and chamfered/round rect pads.
...
Is some cases a created pad stack name had the same name as an other pad stack
having a slightly different shape, thus creating pads with a incorrect shape on board.
Fixes #6495
https://gitlab.com/kicad/code/kicad/issues/6495
2020-11-25 13:57:46 +01:00
9c7c05c161
Mostly formatting cleanup but a few type-casting cleanups too.
2020-11-24 22:16:41 +00:00
45598f2933
Add handling of DXF arbitrary axis/extrusions
...
This fixes some DXFs imports where unforunately CAD tools like SolidWorks
randomly decide to mirror circle definitions across the "z" axis (resulting in x or y axis flips in 2d)
Most likely live projection from 3D to 2D drawings introduces this.
However this is DXF specification to describe it so obtusely with vectors for a 2d drawing.
2020-11-23 21:24:38 -05:00
0e44f5128c
Add const specifiers
2020-11-18 19:50:36 +00:00
7265f84358
fix PAD::TransformShapeWithClearanceToPolygon() incorrect calculation in some cases.
...
For round rect pads, when the arc error was OUTSIDE, the shape was too big and creates
bad shape for chamfered round rect pads.
For chamfered pads, when the clearance value was not 0, the chamfer was not at the
right place.
2020-11-14 08:50:58 +01:00
63773809d0
Formatting.
2020-11-10 18:08:25 +00:00
791a50b493
Remove work-around in favour of real fix in Clipper.
2020-11-04 11:21:45 +00:00
55c25f3cc4
Work around a round-off bug in Clipper.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6260
2020-11-02 17:43:13 +00:00
6bf29deb7f
Improve formatting.
2020-10-31 17:25:08 +00:00
a7d5d1f091
Add more consts all over the place
2020-10-27 11:03:35 +00:00
d1c73cb1d5
Clean up MODULE effective shape memory handling.
2020-10-25 23:38:21 +00:00
31cc100669
Don't make clients deal with nested SHAPE_COMPOUNDs.
2020-10-25 18:17:58 +00:00
d6f91c810f
Fix a few compil and Coverity warnings.
2020-10-25 10:02:07 +01:00
59f3fefd17
When polygonizing arcs don't use synthesized center and angle.
...
Start, mid and end are the "real" properties and come with less
error.
Also collapses two arc polygonization routines into one.
Also fixes DRC checks to be cognizant of arc approximation error.
Fixes https://gitlab.com/kicad/code/kicad/issues/6039
2020-10-23 23:55:45 +01:00
1cb7fbaab1
Fix errors in arc polygonization and test case.
...
1) Tests can't expect accuracies around 1 to work. PCBNew defaults
to 5000.
2) Tests shouldn't artifically expand tolerance just to match the
results.
3) Tests should guarantee that end point is on arc, not just close
to it.
4) Standard polygonization of a circle is inside so splitting the
error needs to increase radius, not decrease.
5) Special-case first and last points so that they're exact.
2020-10-23 23:55:45 +01:00
19bf594aa0
Remove unused point in polygon test
...
There can be only one.
2020-10-23 12:13:09 -07:00
58c006bc45
Register properties for ARC elements so we can get their netclass.
...
Also improves GAL arc drawing and polygonization.
Fixes https://gitlab.com/kicad/code/kicad/issues/6039
2020-10-23 14:27:36 +01:00
5b4f463c38
kimath: SHAPE_POLY_SET::Format() outputs C++-like code now, like other shapes
2020-10-23 01:18:01 +02:00
a8074ed37d
kimath: POLY_GRID_PARTITION now uses safer degeneracy (overlapping edges/'slits') handling mechanism. Also added some explanation of the algorithm used.
2020-10-23 01:17:54 +02:00
8185a416b9
Fix broken build on Linux with gcc.
2020-10-22 08:36:28 -04:00
9ff49277e1
Add implicit rule generation for keepout areas.
...
Also implements collision detection for SHAPE_POLY_SET.
Fixes https://gitlab.com/kicad/code/kicad/issues/6105
2020-10-22 10:41:21 +01:00
bfd04926b5
Performance improvement for polyset fracture.
2020-10-20 22:26:47 +01:00
006c462d8f
ADDED: Fillet Tracks tool in pcbnew
...
Select two or more track segments and run the "Fillet Tracks" tool.
2020-10-20 21:23:05 +00:00
bbe7573d1c
Performance enhancements to roundrect pads and clearance outlines.
...
Aka: avoid Clipper at all costs.
Fixes https://gitlab.com/kicad/code/kicad/issues/5900
2020-10-14 15:56:43 +01:00
54dc91a623
Account for segment width in aActual calculation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5990
2020-10-14 15:56:32 +01:00
1703729269
Require explicit decl of maxError and errorLocations.
...
This should reduce both performance issues and clearance issues.
2020-10-13 13:49:07 +01:00
48a5907412
Remove extraneous debug statements
2020-10-08 17:56:54 +01:00
db9e111838
kimath: SHAPE_POLY_SET should re-parent triangulated polygons when copied/cloned
2020-10-08 15:22:17 +02:00
2f49db49bf
Fix fly-off arc handles and move Arc Properties to start/end/angle.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5791
2020-10-08 11:33:32 +01:00
16374e9ae1
Ensure string is chosen correctly
2020-10-07 23:23:43 +01:00
8fb154e04e
geometry: SHAPE_RECT: use SquaredDistance() for collision detection
2020-10-07 16:36:37 +02:00
d6fa81036b
geometry: SEG::NearestPoint(SEG) now returns points only on (this) segment
2020-10-07 16:36:37 +02:00
1ef120ff4f
geometry: SHAPE::Format() now outputs C-like code for easy test cases...
2020-10-07 16:36:37 +02:00
7ffef32ea0
geometry: placeholder method for converting compounds to simple polygons [wip]
2020-10-07 16:36:37 +02:00
bd27d38d9a
DRAW_PANEL_GAL: added DebugOverlay() method, creating a temporary overlay for drawing debug graphics
2020-10-07 16:36:37 +02:00
18a3c4c1db
Fix some fairly catastrophic bugs in shape collision optimization.
...
I did a little too much copy & paste last time around....
2020-10-05 22:32:07 +01:00
a28a0e14ba
Fix conversion warnings
2020-10-05 10:41:14 +00:00
8dd7777108
Handle closed shape-line-chain with circle collisions.
2020-10-04 19:40:18 +01:00
f9cfd31351
0 is always a collision (whether clearance is 0 or not).
2020-10-04 13:21:01 +01:00
f4f578b755
Add closed-shape handling to SHAPE_LINE_CHAIN collision routines.
2020-10-04 13:21:01 +01:00
bf67648562
Support optional location reporting in SHAPE collisions.
...
Also fixes a few bugs in the collision routines.
2020-09-28 23:28:33 +01:00
Roberto Fernandez Bautista
Jeff Young
Johannes Pfister
jean-pierre charras
Seth Hillbrand
Jon Evans
david-beinder
Wayne Stambaugh
Marek Roszko
luz paz
Tomasz Wlostowski
Thomas Pointhuber
Marcus A. Romer
Dominik Wernberger
Mikolaj Wielgus
Simon Richter
hoijui
Ian McInerney