b71fa91bc4
Don't write outside of overrides array on pad zone_layer_connections.
...
Use std::array to catch future errors in Debug.
Fixes https://gitlab.com/kicad/code/kicad/issues/13803
2023-02-08 01:32:52 +03:00
a493a2c822
kicad-cli, pcbnew pàlot: honor the color options when ploting pdf files
...
--black-and-white and -t were shown in help, but not handled
Fixes #13805
https://gitlab.com/kicad/code/kicad/issues/13805
2023-02-07 20:20:45 +01:00
82d9176782
FOOTPRINT::Flip(): add missing PCB_BITMAP_T.
...
Fixes #13785
https://gitlab.com/kicad/code/kicad/issues/13785
2023-02-05 18:41:58 +01:00
f2f54fe926
Improve zone-layer-connections terminology and comments.
...
This makes it clearer that the overrides are not inverses of each
other -- one overrides the flashing state and the other overrides
the connection state (to other zones, not to everything).
Also fixes a bug where we were failing to check the force-no-connect
for pads.
2023-02-05 17:39:42 +00:00
c122fd0e36
Remove unused cache_optionally_flashed_connections.
2023-02-05 17:39:42 +00:00
f6fd85af85
CHANGED: Try to determine via/pad flashing state before filling zones.
...
If removing unused via annular ring option is enabled on a layer, then the via will have the ring if both:
- Via center is not inside a rule area with "Keep out copper fill" flag set
- Highest-priority zone the via hole intersects with has the same net
Pads will be flashed if:
- Pad center is not inside a rule area with "Keep out copper fill" flag set
- Highest-priority zone at the pad center has the same net
Fixes https://gitlab.com/kicad/code/kicad/issues/12964
2023-02-05 17:39:42 +00:00
bf1a8f2582
router: Fix clamp in meander corner radius calculation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13781
2023-02-05 07:22:38 +03:00
a59c1afa53
Fix two bugs in RTree polygon collions special case.
...
1) Special case doesn't work for polygons with holes
2) Fix special case to handle intersecting lines where neither end is
in the polygon.
Note that only (1) is required for the bug below. (2) was just
discovered while implementing (1).
Fixes https://gitlab.com/kicad/code/kicad/issues/13779
2023-02-04 13:46:40 +00:00
6b5eeeb861
Preferences dialog: try to reduce its width, in non English languages.
...
Remove some useless spacers, and do not force some widgets to have a to
large size (by removing empty areas).
Work in progress: one panel is still too big.
2023-02-04 14:36:14 +01:00
887c740c2e
Limit the number of potential netnames
...
Don't set text if outside of the clipbox. Text is non-cached so will
get redrawn on zoom
Fixes https://gitlab.com/kicad/code/kicad/issues/13572
2023-02-04 11:17:09 +01:00
8ecf64b6c5
Don't run DRC rules on non-existant layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13753
2023-02-03 15:08:31 +00:00
235925d62c
Clearer reporting of negative clearances.
2023-02-03 15:08:31 +00:00
0d083d0230
AllCuMask() and AllTechMask() are static, they do NOT modify "this".
2023-02-03 15:08:31 +00:00
b427ad80f6
Don't make unneeded copies of std::pairs
2023-02-03 15:28:53 +01:00
dde336ee40
Split connectivity mutex locking
...
Internal routines have no need for locking the mutex they already own.
While external routines that want to recalculate the Ratsnest do need an
exclusive lock before being allowed access
Fixes https://gitlab.com/kicad/code/kicad/issues/13011
2023-02-03 15:26:19 +01:00
8ce0a84ca7
Fix compatibility with older wxWidgets versions.
...
Fix also a compil warning
2023-02-03 08:24:38 +01:00
e20c86ad5e
Minor dialog layout improvements.
2023-02-02 16:54:52 -05:00
e60152e351
Fix island removal when copper->edge clearance is 0
...
Just testing a single point to find copper that is outside the board works
until the arc->segment conversion moves the board outline just enough to
have the filled copper slightly (few IU) outside of the converted outline.
Instead, we do an expensive check of comparing the size of the
intersection between the island and the island's intersection with the
board. If the intersection is at least half as large as the original
island, we can say with certainty that the island is inside. The margin
could be much smaller than half but this preserves the intent without
picking an arbitrary number that might be violated
Fixes https://gitlab.com/kicad/code/kicad/issues/13717
2023-02-02 19:19:26 +00:00
fcefb5f86d
Re-allows selection of bitmaps not owned by a footprint.
...
It was broken by my commit f8051d95Fixes #13747
https://gitlab.com/kicad/code/kicad/issues/13747
2023-02-02 18:09:37 +01:00
200bf696af
Fix importing of legacy netclasses
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13746
2023-02-02 08:29:43 -05:00
737318a24d
struct ZONE_DESC: ensure ENUM_MAP<PCB_LAYER_ID> is initialized before use it.
...
ENUM_MAP<PCB_LAYER_ID> is tested initialized in some other XXX_DESC,
but not in ZONE_DESC
Fixes #13699
https://gitlab.com/kicad/code/kicad/issues/13699
2023-02-02 09:11:27 +01:00
26b9d2f5ac
DRC: Allow disabling DP constraints in specific areas
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13743
2023-02-01 23:11:39 -05:00
7874735810
Add doc link to custom rules syntax help.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13727
2023-02-01 23:40:53 +00:00
6543d23d9f
router: Re-add electrical path lines drawing for length tuning.
2023-02-01 20:36:52 +03:00
7d6218acb4
Unify checkbox borders in Interactive Router Settings.
2023-02-01 07:46:42 +03:00
1c2345776e
Remove unused variable.
2023-02-01 07:28:55 +03:00
48e4005111
Fix diff pair router checking of min clearance
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13720
2023-01-31 19:53:35 -05:00
68eac74458
pcbnew: Fix strokeWidth truncation to integer mm in SVG polygons import
...
The polygon conversion algorithm mistakenly stored the stroke width of
filled polygons in an integer variable. As a result, all stroke widths
were rounded down to the next smaller integer mm size. This commit changes
the types in the relevant functions and variables from int to double.
2023-01-31 20:34:25 +00:00
f34aa947d3
Allow on-outline zones to be considered inside
...
Also ensure that calculated areas for island removal are absolute.
The on-outline zone can happen when the clearance to the edge is
particularly small.
Fixes https://gitlab.com/kicad/code/kicad/issues/13717
2023-01-31 12:32:23 -08:00
f8051d954a
Better handling of PCB_BITMAP items in a footprint.
...
- Ensure they can be erased in the FP editor
- Ensure they cannot be selected in the PCB editor (they are not show)
Fixes #13714
https://gitlab.com/kicad/code/kicad/issues/
2023-01-31 11:16:38 +01:00
44cfb1ea43
CADSTAR PCB: Don't create zero sized text items
...
Partially addresses https://gitlab.com/kicad/code/kicad/-/issues/13693
2023-01-30 19:56:22 +00:00
963e82ee7f
CADSTAR PCB: Correctly handle anticlockwise arcs
...
Also add some qa tests for EDA_SHAPE::SetAngleAndEnd
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13626
2023-01-30 19:56:22 +00:00
50e9685490
Check for tented vias before expanding solder mask.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13705
2023-01-30 17:56:35 +00:00
ce06171561
Convert additional sprintf to snprintf
2023-01-30 16:22:03 +00:00
e928d72c3b
Fix relative step file export
...
Forgot to set the project relative path, and the library search path
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13696
2023-01-29 22:19:37 -05:00
5bdaf20af6
eagle: determine and use the minimum copper layer stackup count
...
Fixes: https://gitlab.com/kicad/code/kicad/issues/13484
2023-01-29 21:13:41 +00:00
971abcfc1a
Fix DP meander placer when tuning from an uncoupled section
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12212
2023-01-28 22:25:46 -05:00
68decdd4f2
Fix static event table derived object definitions.
2023-01-28 14:10:06 -05:00
d4a5e2caad
Fix crash when .kicad_pcb is renamed to .kicad_mod and load library attempted
...
Pick a random error message used elsewhere
2023-01-28 10:42:46 -05:00
d04cda35c5
Handle hidden attribute in fp-lib-table
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13689
2023-01-28 09:23:25 -05:00
b1018e8eeb
Relax no-zone-commands constraint on interactive placer tools.
...
These tools are initialized with an item (via/pad/microwave) so there's
no way to tell between during-placement and idle. Besides, they don't
update the ratsnest so they probably won't fall afoul of the original bug
(https://gitlab.com/kicad/code/kicad/-/issues/12736 ).
Fixes https://gitlab.com/kicad/code/kicad/issues/13686
2023-01-28 10:42:24 +00:00
4d811ba975
Enable layer arg for fp export svg
2023-01-27 23:45:42 -05:00
b4994a7fa1
Locked shadows should not be on overlay
...
These are supposed to render under the component
and do not need to be pulled to the front for overlay.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12486
2023-01-27 22:09:42 -05:00
51c8f2c119
Fix library sort order in library viewers
...
The lib table returns a properly sorted list of libraries already, which
we just iterate through. A std::set is a sorted collection, but uses a
different sorting function than the lib table, so appending to a
std::set breaks the initial sorting that was done already.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13530
2023-01-27 23:39:50 +00:00
f6dc48ead7
Pcbnew: Make "Substitute similarly named models" on by default in STEP export.
2023-01-27 23:32:23 +00:00
a3e3231605
Pcbnew: Increase the default size of the board setup dialog
2023-01-27 22:00:39 +00:00
8603c06ef3
Fix netnames.
2023-01-27 19:35:41 +03:00
13ce2ebf46
15% rendering optimization in PCB_TRACK::ViewGetLOD.
2023-01-27 18:37:43 +03:00
8268234aa1
Reverse shown-source logic so we report if it's the netclass width.
...
(whether or not it's *also* the previous track width).
2023-01-27 15:31:02 +00:00
675b6b5d5c
Fix logic error in ec4d377d
...
Also fixup goldens for importers for new default island mode
2023-01-27 10:16:56 -05:00
ec4d377d15
Stop removing islands for fully-isolated zones
...
It is hard for a user to tell what is going on when their zone
just doesn't fill at all. We catch isolated areas in the DRC so
we can just leave them alone here until the zone has at least one
non-isolated filled area.
Also change default back to always remove islands to reduce confusion
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13271
2023-01-27 08:57:18 -05:00
e3fa447f0c
router: Remove extra qualification.
2023-01-27 11:56:23 +03:00
0ff6cb49d6
router: When dragging tracks, don't snap to parts of the original line.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10113
2023-01-27 11:06:36 +03:00
52edbf91dc
Better synchronization of various ratsnest visibility controls.
2023-01-27 10:01:12 +03:00
a872ed11bf
Fix paths for Copy default global library table.
2023-01-27 09:24:52 +03:00
a0236113da
Attempt fix to RATSNEST crash
...
We call 'RecalculateRatsnest' in multiple locations, this will
invalidate various pointers needed by VIEW::Redraw(). When this is
called through the normal connectivity routines, we have the mutex
locked to prevent conflict but we've added more locations that update
just the Ratsnest. The std::adopt_lock should take over the existing
lock when needed
Fixes https://gitlab.com/kicad/code/kicad/issues/13011
2023-01-26 17:32:38 -08:00
ec9e7eed90
Don't link DNP with Exclude from Pos files
...
Exclude from Pos file property follows the footprint but may be
different from the DNP property
Fixes https://gitlab.com/kicad/code/kicad/issues/13616
2023-01-25 13:54:12 -08:00
a6badd0313
Fix compile warning
2023-01-25 13:53:13 -08:00
2312cf34c4
Pay attention to knockout text when adding to DRC Rtrees.
2023-01-25 18:34:03 +00:00
b2f6c13b6a
Fp editor and Fp viewer: fix missing info on msg panel after loading a fp
...
Fix also duplicate/not used code
Fixes #11404
https://gitlab.com/kicad/code/kicad/issues/11404
2023-01-25 17:47:04 +01:00
a76a4f9788
Router: don't unnecessarily change track widths on layer change
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13546
2023-01-25 09:34:17 -05:00
ae812bdf39
Try to use the theme setting for the cli pcb svg export
2023-01-24 22:57:28 -05:00
e886ccacbd
Cleanup unused local variable.
2023-01-24 23:45:55 +00:00
769afa6fe6
Properties: refactoring
2023-01-24 12:08:37 -05:00
890103a012
Properties: Fix handling of mixed value selections
2023-01-24 11:51:26 -05:00
05198b896f
Move PCB_EDIT_FRAME::ExchangeFootprint to pcb_edit_frame.cpp
...
No idea why it was in the dialog file, but there is no good reason for that.
2023-01-24 12:54:05 +00:00
00e2bbac5a
Special-case net-ties for solder mask bridging.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13646
2023-01-24 11:33:08 +00:00
b0ec006b81
The safety of running the event loop during doCloseWindow is debatable.
...
(Possibly a fix for Sentry KICAD-7T.)
2023-01-24 11:33:08 +00:00
8eae75e8d6
Suppress handling of selection events until delete is done.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13451
2023-01-24 00:07:40 +00:00
e713a3eac2
Handle cleanup safely
...
Make sure that the connectivity has successfully completed before
attempting to merge segments. Also avoids reaching into the shared_ptr
if we don't need to
Fixes https://gitlab.com/kicad/code/kicad/issues/13639
2023-01-23 15:56:46 -08:00
12b0a12d74
Handle DP checks for board minimum rules
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13640
2023-01-23 17:45:16 -05:00
efe12f2da5
Cleanup variable naming
...
Also remove ancient/unused code for lazy resolving
2023-01-23 22:21:12 +00:00
a9ed47f06c
Update KICAD6->KICAD7
2023-01-23 22:21:12 +00:00
509b39e9e4
Propagate nets within non-conflicting clusters immediately.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13601
2023-01-23 16:25:29 +00:00
ece775c53c
Blind/buried vias are drilled, and drilled holes need to avoid prior-burned holes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13627
2023-01-23 16:25:29 +00:00
c430c88f9d
Immediate update of no-net objects when they're connected to something else.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13601
2023-01-23 16:25:29 +00:00
4a55b7998a
Standardize on longer phrasing
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13514
2023-01-23 08:59:18 -05:00
e11012fe06
Properties: show via friendly name
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13635
2023-01-23 08:56:21 -05:00
09b83b95d0
PCB Editor: Locked filter unchecked by default
...
And some minor code style improvement in one place
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13246
2023-01-23 11:36:06 +00:00
136c150460
plot_brditems_plotter: fix crash (null poiner use) when run from kicad-cli,
...
with a not initialized plotter render settings.
Fixes #13633
https://gitlab.com/kicad/code/kicad/issues/13633
2023-01-23 11:50:27 +01:00
e0111f709b
Fix minor cosmetic issues in Print dialogs
...
Fixes #13629
https://gitlab.com/kicad/code/kicad/issues/13629
2023-01-23 09:21:23 +01:00
1bc3f77d2e
Coverity fixes
2023-01-22 22:48:31 -05:00
1aca216f18
Add DRC suggestions for Via_Type
2023-01-23 05:14:06 +03:00
91d154cd28
Add DRC suggestions for Shape
2023-01-22 22:35:12 +03:00
05eafdc08b
Add missing DRC Type suggestions.
2023-01-22 22:35:12 +03:00
bf8762c57c
Streamline color lookup (and a bit of wxS).
2023-01-22 17:18:03 +00:00
09cb222252
Change indeterminate checkbox behavior to be more intuitive
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13604
2023-01-22 12:10:45 -05:00
351f668645
Separate selection change updates from properties updates
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13624
2023-01-22 12:10:45 -05:00
729b2deb5c
Use board layer names for properties grid.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13553
2023-01-22 15:47:57 +00:00
0ff32d20cd
wxS more things
2023-01-22 09:41:42 -05:00
03a64492e8
Handle all member vars if not doing a std::swap on "this".
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13621
2023-01-22 13:00:18 +00:00
86c12d35b4
Small order change for three View menu items
2023-01-22 01:04:17 +00:00
005648f4db
The net inspector is a modeless panel, not a dialog.
...
No need for OK button.
2023-01-22 00:14:02 +00:00
8a9a63134c
Minor dialog adjustments.
2023-01-22 00:14:02 +00:00
3a9ef02fdf
Clean up handling of selection changes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13620
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13609
2023-01-21 17:37:29 -05:00
df4f9d4c94
FP editor: fix crash when trying to save a footprint after removing its library
...
Fixes #13619
https://gitlab.com/kicad/code/kicad/issues/13619
2023-01-21 18:18:38 +01:00
12215647f1
Handler blind/buried/micro via drawing when all layers are hidden.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13607
2023-01-20 19:09:12 +00:00
6586a2ca66
PCB Editor: prevent scroll wheel on track size opening board settings
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13218
2023-01-20 12:13:16 -05:00
34810d24a5
Remove unique dummy text
...
Text that will be replaced programmatically should be specified as
"dummy" in wxFormBuilder to avoid adding unneeded translation strings
2023-01-20 09:11:08 -08:00
89d434255c
Run clearance rules for router status bar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13605
2023-01-20 14:19:58 +00:00
d9a90519f9
Flatten (and fix layout) of library table managers.
2023-01-20 14:19:58 +00:00
24dd402e29
Finish processing last pad in pad group, and trim whitespace from pads.
2023-01-19 15:48:32 +00:00
67eae77e9d
PCB/SCH/3D: Implement 3D cross-probing from schematic
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/3859
2023-01-19 10:39:47 -05:00
b8352b07c5
PCB: Immediate mode copy should deselect if hover selecting
2023-01-19 09:45:47 -05:00
7e5a2450b8
Move multiple wxMessageBox to DisplayErrorMessage
...
Also provide protection for headless running in multiple callsites
Fixes https://gitlab.com/kicad/code/kicad/issues/13575
2023-01-18 16:54:01 -08:00
b99bd7633d
Allow commas, spaces in pad names for net-ties
...
Net tie groups are currently separated by comma. But comma is also an
allowed, albeit rare character for pad names. To allow pad names with
commas in net tie groups, the group definition must be escaped with a
forward slash for commas (and forward slashes).
Pad 1,2
Pad 2,3
Net-tie group "1\,2,2\,3"
Fixes https://gitlab.com/kicad/code/kicad/issues/13001
2023-01-18 14:45:52 -08:00
8f4486752d
Fix build error
2023-01-18 10:20:20 -08:00
7fa15b3fbb
Only update items that can be affected
...
When updating the view, don't force repaint all items. Changing the
line width only affects elements with lines
Fixes https://gitlab.com/kicad/code/kicad/issues/13579
2023-01-18 09:59:00 -08:00
cff0560088
Eagle schematic import: Handling of escaped text
2023-01-18 12:33:36 +00:00
3af9c658e6
Don't specify fonts in wxFormBuilder. It only leads to pain.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13547
2023-01-18 12:28:07 +00:00
90c76fa4bc
Pcbnew: display first and last layer ID on buried and micro vias.
...
Fixes #13566
https://gitlab.com/kicad/code/kicad/issues/13566
2023-01-18 09:56:25 +01:00
940d88c47d
PCB_SHAPE::swapData() : Do not swap twice a parameter
...
Fixes #13576
https://gitlab.com/kicad/code/kicad/issues/13576
2023-01-18 08:37:34 +01:00
7844602210
Nullptr safety.
2023-01-18 01:30:40 +00:00
f90b04c715
Nullptr safety. (Sentry KICAD-5N)
2023-01-18 01:05:27 +00:00
f45d44a639
Don't leave temp footprints attached to a board.
2023-01-18 00:46:59 +00:00
f35a02d57a
Move early exit higher in netname redraw
...
If the track is outside of the viewbox, GetLOD returns HIDE. This needs
to be handled quickly in the loop before further processing
Fixes https://gitlab.com/kicad/code/kicad/issues/13572
2023-01-17 15:56:04 -08:00
3cc960a872
Push nets to free pads when they're used.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13516
Fixes https://gitlab.com/kicad/code/kicad/issues/13517
2023-01-17 23:29:47 +00:00
1d223d1439
Safely load python plugins
...
Catch potential exceptions when doing the initial python plugin load
Fixes https://gitlab.com/kicad/code/kicad/issues/12231
2023-01-17 12:56:15 -08:00
60ba245474
Remove Eagle islands by default unless told otherwise
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13503
2023-01-17 12:49:44 -08:00
26c821962f
Simplify and regularize text variable substitution architecture.
...
EDA_ITEMs are responsible for giving their parent a crack at it if
they failed to resolve it. This recurses all the way up to the schematic/
board, and then to the project.
Cross-reference handling is also move to the EDA_ITEMs. It must be done
before bubbling up so that we don't end up in loops. (The aDepth parameter
will break the loop, but without having done anything useful.)
Fixes https://gitlab.com/kicad/code/kicad/issues/13541
2023-01-17 17:05:41 +00:00
9820062c71
Fix clipping issue in Pad Properties dialog.
2023-01-17 17:05:41 +00:00
022c913e8f
Fix another broken graphics import file filter.
2023-01-17 11:34:51 -05:00
369c0efade
Bitmaps: respect source DPI
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13565
2023-01-17 11:20:17 -05:00
f81642bbb3
Fix broken graphics import file filters.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13570
2023-01-17 11:19:53 -05:00
90c5ede1e6
pcbnew: move DIALOG_PAD_PROPERTIES_BASE from dialog_pad_properties to its own files.
...
dialog_pad_properties_base.fbp included to many dialog descriptions.
2023-01-17 09:44:28 +01:00
ac94995f70
Some more wxS
2023-01-16 19:07:50 -05:00
08295c795b
Add vertical justification buttons to pcbnew text dialog
...
kicad 6 default behaviour was not achievable through the UI.
Addresses #13423 and #2375
2023-01-16 18:40:08 +00:00
22497502e6
Don't leave a dummyPad in a group. Freeing it will cause problems.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13556
2023-01-16 17:30:40 +00:00
e490728226
Don't run the footprint checker's shorting pads routine at board level.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13555
2023-01-16 16:44:16 +00:00
c4ccf46cc7
DIALOG_PAD_PRIMITIVES_PROPERTIES: fix incorrect display of polygon primitive.
...
Fixes #13557
https://gitlab.com/kicad/code/kicad/issues/13557
2023-01-16 17:32:22 +01:00
f0b2902b8c
Don't allow quit while zone filler is running.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13551
2023-01-16 16:01:45 +00:00
62649b868c
Ensure good fonts in grid headers.
...
Also moves rendering to a flat look for headers (instead of a beveled
border).
Fixes https://gitlab.com/kicad/code/kicad/issues/13547
2023-01-16 02:47:14 +00:00
ca1fb732c8
Share Eagle var substitution between board and schematic importers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13541
2023-01-15 22:27:19 +00:00
91c5bb9175
Block user-initiated zone-fill actions, but not system ones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13536
2023-01-15 19:16:36 +00:00
0328cae94c
Detach revert footprint copy from parent board.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13537
2023-01-15 17:26:44 +00:00
744fd3a71e
Fix GCC build issue on Linux.
2023-01-15 12:18:56 -05:00
bf4b9ef6e2
Remove sorting by priority before filling.
...
We can't fill lower-priority zones until the higher-priority ones
have been tesselated, and as the tesselation step always gets pushed
to the back of the queue after the fill finishes having them sorted
by priority accomplishes little. (We're also going to push all other
layers of the high-priority zone to the back as the first layer will
have the lock, further degrading the usefulness of sorting.)
2023-01-15 15:52:24 +00:00
0c8f95aa02
Make sure tesselate_lambda has lock before modifying zone.
...
Also implements locking for upating pad & tracks' zoneConnectionCaches.
Fixes https://gitlab.com/kicad/code/kicad/issues/13531
2023-01-15 15:52:24 +00:00
45a71a205c
Don't wait for degenerate zones.
2023-01-15 15:52:24 +00:00
f1aee2fa18
Minor dialog tweaks.
2023-01-14 01:45:30 +00:00
ea4c3a267b
Be more discerning about dirtying zones for auto-refill.
...
In particular, record which children caused a parent footprint to be
added to the commit so we can determine if they have intersecting
bounding boxes and/or layers.
Fixes https://gitlab.com/kicad/code/kicad/issues/13512
2023-01-13 19:09:22 +00:00
f358749b28
Import copper pour cutouts from Eagle packages (footprints).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13503
2023-01-13 16:35:45 +00:00
761e754294
router: trying to improve the 'guess posture' algorithm to work well with both fix-all and fix-last-segment on click
2023-01-12 23:37:07 +01:00
65def26b4d
router: follow up ROUTER::GetUpdatedItems() API changes in the ROUTER_TOOL
2023-01-12 23:37:07 +01:00
d07d6c9a30
router: fix 'Bowen knot'-looking hulls for 0-length segments
2023-01-12 23:37:07 +01:00
0595440d79
router: minor improvements in shove algorithm handling of vias
2023-01-12 23:37:07 +01:00
213d30cad6
router: workaround for assertion fail on NODE::Add(unique_ptr<LINE>)
2023-01-12 23:37:07 +01:00
aa7271e55a
router: expose the 'head' traces in a separate list for debug logs
2023-01-12 23:37:07 +01:00
79f567cff4
Standardize BOM nomenclature
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13499
2023-01-12 13:54:12 -08:00
631fd54f9f
Don't suppress writing of empty values. They have meaning.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13507
2023-01-12 15:24:59 +00:00
595bf70d5d
Do not try to read from UI elements that haven't been initialized yet
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13480
2023-01-12 09:16:22 -05:00
c530bdb5a1
Rename GetSelectMenuText to GetItemDescription
...
This descriptive text is used for many more things than
just the select menu these days.
2023-01-11 22:27:44 -05:00
1ff1571849
Bring back deprecated net properties to rules system
2023-01-11 22:14:52 -05:00
2654279678
Cleanup zone bbox cache in destructor
2023-01-12 00:21:51 +00:00
248399f771
Standardize print/plot terms
...
Use choice box for color/bw selection
"border and title block" -> "drawing sheet"
Fixes https://gitlab.com/kicad/code/kicad/issues/13128
2023-01-11 12:30:02 -08:00
8238973bf4
Make sure std::unique_ptr gets initialized.
...
(Fixes unit test failure.)
2023-01-11 18:28:29 +00:00
096cc7a5ad
Suppress unflashed annular rings only when copper layer is primary.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13471
2023-01-11 18:15:46 +00:00
c85dcbc4e1
Improve performance of IncrementTimestamp so it can be called at will.
2023-01-11 17:41:08 +00:00
1500e3bb80
Pcbnew, minor fix: do not write twice the dielectric color in stackup section in broad file.
2023-01-11 17:45:00 +01:00
30c9deb9d5
Flat(er) look for paged dialogs.
2023-01-11 01:11:25 +00:00
f153ff8453
Add GetCurrentSelection() python scripting helper
2023-01-10 16:39:48 +00:00
507edc54b3
Fix issues related to footprint wizards not loaded/reloaded in fp editor and fp wizard frame.
...
Fixes #11195
https://gitlab.com/kicad/code/kicad/issues/11195
2023-01-09 19:58:02 +01:00
c3ded7a03d
Remove board editor standard dialog button static line separators.
2023-01-09 08:49:38 -05:00
e916b715d5
Special case for very-short tracks was killing both-ends-in-a-zone.
...
(And doing so randomly as if the closer endpoint to the zone center
was the one without a pad then it would get marked as good, while if
it was the other way around we'd notch 2 connections for the pad end
and none for the other end.)
Fixes https://gitlab.com/kicad/code/kicad/issues/13420
2023-01-09 13:35:54 +00:00
82a1175d72
Fix cli gerbers output path and add job file
2023-01-08 23:03:30 -05:00
6ed90134c7
Check for collisions on common layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13438
2023-01-08 20:53:15 +00:00
f28ea5e784
Remove standard dialog button static line separators.
...
For the sake of consistency across all dialogs and window that behave
like dialogs, remove the static line that separates the main part of
the dialog from the standard buttons. This only applies to windows
that have the standard button on the bottom of the frame.
This covers the 3D viewer, CvPcb, common, GerbView and KiCad dialogs.
2023-01-08 13:15:33 -05:00
ae8bbcad32
PadArray.py: ensure parameters used to create a VECTOR2I are ints.
...
Fixes #13430
https://gitlab.com/kicad/code/kicad/issues/13430
2023-01-08 09:10:13 +01:00
a369fd6a9c
Fix swig optimization flag causing incompatible codegen
2023-01-08 00:55:21 +00:00
1e407e5e20
Minor dialog adjustments.
2023-01-07 23:55:01 +00:00
4794956804
Minor dialog adjustments.
2023-01-07 22:26:43 +00:00
bc50f537ff
Re-layout standard buttons after editing their names.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13425
2023-01-07 19:34:32 +00:00
e509fa0fc9
Don't depend on a pad being connected to a non-zone when filling zones.
...
If the pad hasn't already been owned by another zone, and the zone we're
currently filling can connect to it, then we want to try to flash it even
if it's not connected to anything else.
Fixes https://gitlab.com/kicad/code/kicad/issues/13415
2023-01-07 19:34:32 +00:00
a93c83d2fa
Don't count non-coper SMD pads for likely type
...
We are only concerned for connected pads, not apertures
Fixes https://gitlab.com/kicad/code/kicad/issues/13387
2023-01-07 07:14:16 -08:00
94847336a1
Bug fix for dark mode switch for layers palette.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13154
2023-01-06 20:43:33 +00:00
2399759c03
Allow default sexpr libs to have '.' and no .pretty
...
We default to KICAD_SEXPR format. In this case, if the library doesn't
have the .pretty extension, the full directory name including a '.' is
the correct nickname
Fixes https://gitlab.com/kicad/code/kicad/issues/13388
2023-01-06 10:08:32 -08:00
2cbb66d70d
Dim other pads when in pad edit mode.
2023-01-06 11:13:57 +00:00
25f34a14a1
Check file starting signature when opening
...
Opening .brd files might be legacy or eagle (probably others as well).
We check for the starting "PCBNEW" in KiCad files to differentiate
Fixes https://gitlab.com/kicad/code/kicad/issues/10201
2023-01-05 18:10:22 -08:00
1ccd387c8d
Exit a group when selecting a component outside it
...
We had this filter in place when doing mouse selection, but not when
the selection comes from another tool event.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13398
2023-01-05 20:32:52 -05:00
a6eb6d3228
Default to SMD if we have an SMD pad
...
SMD pads indicate that the footprint can be used in PnP more often than
the presence of THT indicate that it cannot.
Fixes https://gitlab.com/kicad/code/kicad/issues/13387
2023-01-05 16:56:07 -08:00
126225866b
Don't add footprint components to PCB group
...
Footprint components are only group-able inside of the footprint editor
Fixes https://gitlab.com/kicad/code/kicad/issues/13396
2023-01-05 15:38:07 -08:00
7dfa100ff0
Correctly refresh the board after action plugin run and maintain
...
selection
2023-01-05 14:05:15 -08:00
cbe5340d37
Allow pads in multi-select mode when nothing else would be selected.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13371
2023-01-05 17:02:50 +00:00
fa7205ebbc
Handle block insert scaling a little better but incompletely
...
https://gitlab.com/kicad/code/kicad/-/issues/11614
2023-01-04 21:22:36 -05:00
0e42cb19f2
Realize we can just describe the dxf arb axis with our MATRIX3x3 class
2023-01-04 20:42:56 -05:00
20d7ffd5d3
Ensure we are not trying to sort on an invalid col
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13377
2023-01-04 13:56:25 -08:00
6271917682
Remove deprecated -py3 flag, use -O for swig
2023-01-04 11:32:15 -08:00
98d55ce82f
Avoid rebuilding with each commit
...
We shouldn't include the kicad_build_info.h outside of the wrapper
build_info.h. Also adds an error directive to prevent re-introduction
of define dependencies
2023-01-04 11:32:15 -08:00
14339aa786
Fix shadowing variable
...
Move check into switch block
2023-01-03 17:15:44 -08:00
ac3ed02283
Rework bitmap cache and enable it
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12405
2023-01-04 00:26:45 +00:00
8ab9934143
Use our own cmake module path variable to avoid conflicting with the main ones listy functional
2023-01-03 19:18:16 -05:00
375fdb7a49
Exact clearance is allowed; less than clearance is an error.
...
Also fixes a bug where the units weren't shown for extra precision
numbers.
Fixes https://gitlab.com/kicad/code/kicad/issues/13262
2023-01-04 00:03:11 +00:00
1ba9a6abe3
Rotate/Mirror: unbreak immediate mode actions
2023-01-03 16:05:52 -05:00
c2e7524cb6
Surpress the giant opencascade stats print unless we are tracing
...
Also catch Warn level messages to set a flag and print the relevant there were warning message
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8613
2023-01-02 18:34:32 -05:00
056349e5ea
Units for footprint preview widgets.
2023-01-02 22:12:26 +00:00
67e6603699
Move updateUnits functionality to where it can be shared.
...
Also call it when adding a footprint via the chooser.
Fixes https://gitlab.com/kicad/code/kicad/issues/13340
2023-01-02 22:12:26 +00:00
f4bce6079c
Prevent round-off errors from drawing one spoke and not the other.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13316
2023-01-02 19:23:52 +00:00
07b4f88e6b
Pcbnew: Fillet Lines tool does not set line width and layer.
...
When fillet a polygon or a rect, the resulting lines and arcs had incorrect
width and layer.
Fixes #13338
https://gitlab.com/kicad/code/kicad/issues/13338
2023-01-02 16:52:08 +01:00
20f2232d4e
Adjust dimension units when placing footprints on board.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13339
2023-01-02 12:39:35 +00:00
e8114dc49a
Minor compil and Coverity warnings fixes.
2023-01-02 10:21:42 +01:00
16fd586c41
Do not prune items/layers when copying the clipboard to the FP editor: all are allowed
...
(Some are disabled only for GUI)
Fixes #13334
https://gitlab.com/kicad/code/kicad/issues/13334
2023-01-01 13:35:05 +01:00
8e8a3c7bdc
Do not translate name in version info
...
Leave the application name in version info untranslated when
viewed, copied, or used in a bug report.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13298
2022-12-31 20:28:45 -05:00
9f56771611
Fix a typo
2022-12-31 11:41:04 +01:00
53b6993d2b
Don't report errors in first pass of board outline generation.
...
Segments which aren't used to build holes in footprints can still
be used by the second pass to build the board outline.
Fixes https://gitlab.com/kicad/code/kicad/issues/13321
2022-12-30 22:32:08 +00:00
95f5d92fc6
Fix length overestimation when first/last line segment enters a pad.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13322
2022-12-30 16:27:59 +05:00
867a2e833d
router: Hotglue the debug graphics back to pcbnew.
2022-12-30 14:44:48 +05:00
4c63b4e061
Class name <-> file name sync.
2022-12-29 18:05:57 +00:00
7d40bbdf38
router: mark the head trace (as opposed to the 'fixed tail') with fully saturated color
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11386
2022-12-29 17:54:59 +01:00
dfb1068358
router: improve heuristic to avoid segment drag 'flickery snapping'
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10113
2022-12-29 17:54:31 +01:00
4bb1b4a3d2
Router: settings dialog fixes
...
Make keyboard activation of OK save settings instead of cancelling.
Also, fix the string for the shortcut so that it works (shortcut
unchanged).
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13303
2022-12-29 10:31:12 -05:00
3b55f9e326
PCB Editor: Inform tools when selecting/unselecting net
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13308
2022-12-29 13:46:20 +00:00
29e51cc198
fix quoting of layernames
2022-12-29 09:01:11 +00:00
411efe6f3d
PCB Editor: Allow mouse drag of group-of-groups
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13076
2022-12-28 15:23:52 -05:00
0c415a7190
PCB Editor: make rotate menu bar items conditional on selection items
2022-12-28 13:33:35 -05:00
d62681f6db
PCB Editor: fix pad preview sketch mode not applying immediately
2022-12-28 12:27:57 -05:00
e7300ffb5c
Improved column sizing in library setup dialogs.
2022-12-28 16:27:03 +00:00
8d4694a83e
Iterator safety.
...
Move mergeSegments to a lambda so we can more easily break out of the
nested for-loops when we find a merge. We really need to start over
again at that point as we may have invalidated our connectivity items
iterator.
This also means we don't have to queue up all the track pointers, which
should get us a _little_ bit of the performance back.
Fixes https://gitlab.com/kicad/code/kicad/issues/13287
2022-12-27 20:14:13 +00:00
741d1e043a
PCB Editor: make Mirror menu items conditional
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13230
2022-12-27 14:18:47 -05:00
c85590a470
Correct is-inside logic.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13259
2022-12-27 14:34:35 +00:00
ee0a41e3bc
Remove excess calls to SelectedItemsModified
...
We really don't want to post these events unless the *selected* items
were actually modified, since it results in a redraw of the properties
panel (which disturbs edit state and causes flicker on MSW).
Now the COMMIT system is responsible for sending this event iff the
commit touches items that are selected.
Side note: UpdateMsgPanel is useless on every app except pl_editor, so
it can probably be refactored/removed at some point.
2022-12-26 20:57:58 -05:00
5eb3f5d3e7
Use correct translation macro for group names
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13277
2022-12-26 20:11:20 -05:00
dee5357d4d
Properties: give focus back to canvas after committing changes
...
Only needed on MSW, but safe to enable everywhere I think
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13275
2022-12-26 16:46:03 -05:00
ab6aa08f33
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13263
2022-12-26 20:33:04 +00:00
1f3727f548
Assigning a netclass has no meaning in fp editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13267
2022-12-26 20:33:04 +00:00
f214f6f44c
Temporarily work around buggy zone refresh behavior
...
The actual problem is that EVENTS::SelectedItemsModified (via EDA_DRAW_FRAME::UpdateMsgPanel) is being called on every OnModify call, where it really should only be called if the *selected* items are modified. This problem will take longer to fix.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13279
2022-12-26 14:04:53 -05:00
eb5a831a99
Fix typo.
2022-12-26 14:11:46 +00:00
0094a0fc15
Treat teardrops as tracks not zones for disallow constraints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13264
2022-12-26 11:33:09 +00:00
fbaf4af489
Properties: Allow dynamic update of read-only state
2022-12-25 20:35:44 -05:00
b85fab9ab6
Support DXF ellipses and elliptical arcs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12563
2022-12-24 22:46:07 -05:00
5dce8323e8
KIGFX::REPAINT is not enough if the item isn't in the view.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11656
Fixes https://gitlab.com/kicad/code/kicad/issues/13217
2022-12-24 17:18:22 +00:00
34e134c5e5
Don't allow clearanceEpsilon to force clearance < 0.
...
Also, a plated hole has the max clearance of hole_clearance and
copper_clearance.
Fixes https://gitlab.com/kicad/code/kicad/issues/13237
2022-12-24 12:56:41 +00:00
020f8f61db
Let's try fixing the doxygen-python again
2022-12-23 23:11:04 -05:00
59f0e428fa
Fix a PnS router issue doesn't respect knockout texts.
...
Fixes #13251
https://gitlab.com/kicad/code/kicad/issues/13251
2022-12-23 18:17:44 +01:00
eef47c2a79
DRC: ensure tracks are tested against holes, even if hole clearance is set to 0.
...
Even with clearance = 0, copper to hole must be tested because it cannot be
inside the hole
2022-12-23 14:06:10 +01:00
e152cf0a92
Undo one doxygen-python build change, remains broken
2022-12-22 21:35:21 -05:00
e19fb101ef
Properties: Show basic marker props
2022-12-22 17:45:16 -05:00
18788b03eb
Properties: Hide unsupported hyperlink property
2022-12-22 17:45:16 -05:00
2b4cafe9f7
Properties: Fixes for arc tracks
2022-12-22 17:45:16 -05:00
4a0588db7a
Properties: translation fixes
2022-12-22 17:45:16 -05:00
cc2b107649
Footprint Viewer: resolve canvas type after menus are created
...
SaveSettings can't be called until the menus are in place
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13243
2022-12-22 12:14:55 -05:00
8bfec30761
Fix the pcbnew.py dependency causing the doxygen to fail
...
The doxygen-python target recreates pcbnew.py that got deleted by xml-to-docstrings
2022-12-21 23:49:23 -05:00
caeb579174
Fix the dependencies for the python doxygen build
...
DEPENDS was being used for targets which is invalid for add_custom_target...as confusing as that is.
It is files only.
2022-12-21 23:39:35 -05:00
1cc9792cdb
Fix snapping dist when disabling grid
...
The disable grid hotkey should allow the snap scale to be completely
determined by the snapSize and world scale. This prevents snapRange
from overriding in the case where grid is disabled.
Additionally, we disallow grid snapping when the grid scale is not
visible. This means that when zoomed out sufficiently to not show the
minor ticks, these minor ticks will not override a snap
Fixes https://gitlab.com/kicad/code/kicad/issues/12303
2022-12-21 17:47:45 -08:00
1590e48ec1
Use translated strings for property display
2022-12-21 18:03:15 -05:00
47dc2379d8
PCB: Fix issues with grab unconnected
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13232
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13233
2022-12-21 15:10:19 -05:00
e28f6ecc00
Fetch a better location for keepout area collsions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13220
2022-12-21 18:22:15 +00:00
e8f755c665
router: Match segment endpoint calculation between dragger and the tool.
...
Prevents always picking point A when dragging short segments.
2022-12-21 20:55:49 +03:00
75053cfc57
Remove normally unused code from Move function.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13222
2022-12-21 19:06:32 +03:00
5d94d2634e
PCB Editor: make locking menu items conditional
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/5202
2022-12-21 10:34:54 -05:00
44ab6876d9
fp editor: remove useless "Unroute Selected" from context menu.
...
Fixes #13229
https://gitlab.com/kicad/code/kicad/issues/13229
2022-12-21 13:11:51 +01:00
b0cbab5c4b
Footprint Editor: Focus search field when window is first opened
...
The search field on the Symbol Editor is focused when its window
is first opened. Similar behavior has been implemented in the search
field of the Footprint Editor with this change.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13100
2022-12-20 19:54:02 +00:00
bd24e85289
PCB: Add Copy With Reference to the Positioning Menu
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/11947
2022-12-20 11:54:05 -05:00
161a1e21f5
PnS router: NPTH can be on copper layers, depending of the pad size and the hole size.
...
Now: round NPTH with a round hole bigger than the pad are not on a copper layer.
Other pas shapes are seen on copper layers (far from ideal, but reasonable)
Fixes #13214
https://gitlab.com/kicad/code/kicad/issues/13214
2022-12-20 12:50:22 +01:00
f601c87cea
Export UNITS_PROVIDE into SWIG
2022-12-19 17:30:37 +00:00
abff7975f1
Python scripting: fix some issues when trying to create a DRC Report:
...
- avoid aborting the DRC report on a .dru issue without any error message.
- ensure the list of layer names is up to date (contains both canonical
and user layers names, that can be used in DRC tests.
Fixes #11410
https://gitlab.com/kicad/code/kicad/issues/11410
2022-12-19 12:39:20 +01:00
6c73fe05e9
python scripting: better fix for commit 5a79821 (fix crash due to a null pointer):
...
Try to use a better error message for severity.
Fixes #13160
https://gitlab.com/kicad/code/kicad/issues/13160
2022-12-18 18:31:19 +01:00
639626fda4
Include the proper header instead of the entire lockfile function
2022-12-17 23:37:24 +00:00
82a11c71af
Clean up extra control creator logic in pcbnew save file dialog
2022-12-17 23:37:24 +00:00
5abf73e3c9
Never call ReCreateMenuBar inside a menu event handler
...
As of wxWidgets 3.2, the wxWidgets event handler runs code after the
the client event handler that depends on the menu still existing.
Because there are potentially many paths to call ReCreateMenuBar from
within a menu event handler, let's just wrap this action in a CallAfter
to make sure it happens after the wx handler call completes.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13149
2022-12-16 16:37:51 -05:00
90fb315113
Add missing text alignment types to SWIG export
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13174
2022-12-16 18:55:21 +00:00
e699c25d98
Add operators for the SWIG wrapper of EDA_ANGLE
2022-12-16 18:55:21 +00:00
66c2462c7e
Eliminate angle as double in SWIG wrapper
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13171
2022-12-16 18:55:21 +00:00
66e9d5c61c
Return reference rather than copy
...
No need to return a const copy by default in GetItems(). The const
reference will be faster. Thanks to @GyrosGeier for the suggestion
2022-12-16 10:52:57 -08:00
12ea3e0822
Fix wxWidgets crankiness.
2022-12-16 00:53:53 +00:00
7750d2e00e
Microvias always use separate uvia netclass properties.
...
There is no current microvia size/drill.
Fixes https://gitlab.com/kicad/code/kicad/issues/13176
2022-12-16 00:10:03 +00:00
b5cb9eccbf
Generate dependency files from Swig
...
The wrapper is only rebuilt if one of the files that were parsed during
generation has changed.
2022-12-15 23:42:07 +00:00
e91c039ed3
Prevent event stackup when init pages
...
The paged book initialization (and others) can generate events,
re-laying out the whole dialog multiple times during initialization.
This halts events during the layout period
Fixes https://gitlab.com/kicad/code/kicad/issues/13158
2022-12-15 11:39:03 -08:00
5327ea5823
Respect selectabiltiy when adding wholy-selected groups.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13092
2022-12-15 17:57:58 +00:00
366cad1f01
Uniformly translate "<no net>" message.
2022-12-15 13:59:25 +00:00
5a7982161d
python scripting: fix crash due to a null pointer use.
...
Fixes #13160
https://gitlab.com/kicad/code/kicad/issues/13160
2022-12-15 14:27:29 +01:00
034981ff9d
Add tooltip to add existing library button in pcbnew
2022-12-15 02:08:41 +00:00
93879532f7
More wxTextCtrl minimum widths.
2022-12-14 23:23:41 +00:00
279edcefdc
Don't break tracks without snap
...
If the user asks to not snap to a track, we should also prevent the
track from snapping to the via
Fixes https://gitlab.com/kicad/code/kicad/issues/13142
2022-12-14 13:51:42 -08:00
19a5a3ae16
Remove unused member variable.
2022-12-14 13:36:28 +00:00
2f8cc84551
Hotglue footprint to svg export
...
This needs additional work
2022-12-13 22:50:15 -05:00
eb10d7d1d8
PCB Search: fix untranslated string
2022-12-13 16:35:15 -05:00
5652eaea82
Search Pane: name net 0 as "No Net" with no class
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13148
2022-12-13 15:52:07 -05:00
c0872364d4
Get rid of bloated bitmap buttons on wxWidgets 3.2.
2022-12-13 20:48:02 +00:00
88038907fa
Pcbnew, graphic importer: do not import 0 length segments and smaller than 20 nm Bezier curves.
...
Degenerated Bezier curves (i.e. straight lines) are imported as segments.
They create issues in kicad because they are hard to edit and manage.
2022-12-13 20:23:40 +01:00
d3228dbab2
Differentiate search panel font between Mac and others.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13145
2022-12-13 00:47:19 +00:00
f24372bc18
Layout adjustments for wxWidgets 3.2.
2022-12-13 00:47:19 +00:00
9d13e419c2
Reduce compiler warnings.
2022-12-13 00:47:19 +00:00
4fe35d0df1
More push/pop tool issues
...
We need to pop the move tool off when it doesn't find anything to act on
so that the pushed tools under it on the stack can re-activate
Fixes https://gitlab.com/kicad/code/kicad/issues/13114
2022-12-12 12:56:35 -08:00
2fd500e20b
Respect the "report all errors" checkbox
...
When we have objects spanning multiple layers, the user doesn't need to
see every layer/hole combination violation if they do not request it
(cherry picked from commit c07043e762
2022-12-12 11:14:38 -08:00
6d73d9a08e
Split another couple of hairs in the never-ending "how big is a font".
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13009
Fixes https://gitlab.com/kicad/code/kicad/issues/13115
2022-12-12 17:37:17 +00:00
96a9ec4a0c
Enhance compatibility with V6.0 for Intersheetrefs fields associated to GLOBAL labels.
...
In V6.0, the identifier is "Intersheet References" and was not immediately
seen as Intersheetrefs field.
2022-12-12 16:38:04 +01:00
45eae3e594
Don't Simplify() polys with arcs in them.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13134
2022-12-12 12:54:34 +00:00
5e8227b54a
pcbnew: Support dragging arc center in "Keep endpoints" mode.
2022-12-12 13:00:44 +03:00
3eb31befed
Fix a delay when dragging arc endpoints in pcbnew.
2022-12-12 09:39:56 +03:00
da1e5a80a8
Restore removeCorner transition in PCB editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13133
2022-12-12 07:04:20 +03:00
7e53663d5d
Add a bulk gerber export that's a wee bit smarter
2022-12-11 20:13:26 -05:00
65538ccad4
Rename files and classes to match dialog name.
...
Also a bit of formatting cleanup.
2022-12-11 18:42:57 +00:00
d27fb35780
A few more adjustments to wx 3.2 layout issues.
2022-12-11 14:12:35 +00:00
4e47b5c25f
Fix some layout and selection issues on Mac.
...
Some of these are due to moving to wxWidgets 3.2, but I'm not sure
all of them are. In particular, the need for CallAfter() in the
search pane's selection handler is probably just a wxWidgets bug on
Mac (the control lies about the current selection inside the event
handler).
Also sets better column widths in the search pane.
2022-12-11 00:56:46 +00:00
a7df573748
Clear bounding box caches *before* reverting commit.
...
We're going to re-add items to the view assuming they will have their
current locations, which requires the bounding boxes to be refreshed.
Fixes https://gitlab.com/kicad/code/kicad/issues/13084
2022-12-11 00:56:46 +00:00
75f1067642
GRAPHICS_CLEANER: fix bad detection of short Bezier curves that can be cleaned
...
eda_shape: small enhancement: when generating a polyline from the Bezier curve,
filter the last point if the last segment is shorter than the given min lenght
2022-12-10 18:19:09 +01:00
492e6548ff
If item is on mask layer then we won't call it again on copper layer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13075
2022-12-10 13:51:00 +00:00
b01d950071
Remove start pt when collinear with neighboring pts in zone/poly draw.
2022-12-10 06:21:54 +03:00
02325130fa
Initial arm64 work
2022-12-09 23:48:31 +00:00
aff5245041
Fix enum class DRILL_MARKS no export to python
2022-12-09 18:07:58 +00:00
Alex
jean-pierre charras
Jeff Young
Seth Hillbrand
Wayne Stambaugh
Jon Evans
Kliment
Roberto Fernandez Bautista
Chris Morgan
Marek Roszko
vinsfortunato
Ian McInerney
Mike Williams
Simon Richter
aris-kimi
Dag Lem
Felix Schneider
Tomasz Wlostowski
qu1ck
Gary Kim
Greg Davill
lukas-heiligenbrunner
Tanay Gupta
Jan Mrázek
Alexander Dewing
Yang sheng