1) Tests can't expect accuracies around 1 to work. PCBNew defaults
to 5000.
2) Tests shouldn't artifically expand tolerance just to match the
results.
3) Tests should guarantee that end point is on arc, not just close
to it.
4) Standard polygonization of a circle is inside so splitting the
error needs to increase radius, not decrease.
5) Special-case first and last points so that they're exact.
The groundwork has now been laid for per sheet instance data. Initially
this only supports sheet page numbers but could be expanded to include
other per sheet instance information.
ADDED: Support for user defined schematic page numbers.
Previously disambiguation was looking for exact matches,
but vector buses are permitted to have different ranges and
still participate in merging, so they need to be disambiguated.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5925
Note, the original markdown spec specifies using 4 spaces to indent a
code block (https://daringfireball.net/projects/markdown/syntax)
Wrapping with three backticks doesn't work with this lib. Wrapping
with a single backtick for span elements works ok.
in most of files, including wx.h is not necessary, when only 2 or 3 wx files must be included.
Moreover, on windows, including wx.h sometimes create compil warnings about
shadowed vars defined in some specific windows headers.
Also simplifies groups so that other areas of code that have to know
about them at least don't have to know as much. One of the simplifications
is to not worry so much about empty groups until save time; others are in
the access logic to parent groups.
Also simplifies user model slightly by removing Merge and Flatten
(which are just ungroup/group and ungroup/ungroup/.../group).
Also allows multiple groups to have the same name. This is useful when
using groups for a classification system.
Fixes https://gitlab.com/kicad/code/kicad/issues/5788
This changes the file format. All previous copper layers that had a user
defined name are forced back to the canonical name and the user defined
name is stored as an optional quoted string in the layer definition and
only used for UI and plotting purposes. All copper object layer names
are now the canonical name for internal file use.
ADDED: Nine new user definable non-copper layers that can be optionally
added to the board layer stack.
CHANGED: All board layers can now be renamed by the user.
CHANGED: User defined layer names can now contain space characters.
Fixes https://gitlab.com/kicad/code/kicad/issues/1969
Improves implicit rule reporting.
Makes some internal names more consistent.
Moves DRC_REPORT to the test framework.
Removes priority (which isn't supported in the grammar)
code refactoring:
- Renamed CADSTAR_COMMON to CADSTAR_ARCHIVE_COMMON
- Renamed CPA_FILE to CADSTAR_PCB_ARCHIVE_PARSER
- Made CADSTAR_PCB_ARCHIVE_PARSER a derived class of CADSTAR_ARCHIVE_COMMON
- Moved all structures in cadstar_pcb_archive_parser.h/.cpp to be defined inside CADSTAR_PCB_ARCHIVE_PARSER class
Removed the bitmap status field that saved internal states into the
file, creating rcs churn. Also removed the unneeded count variables at
the start of the file as these created merge conflicts for every board
that had multiple revisions
Fixes https://gitlab.com/kicad/code/kicad/issues/1850
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.
There is still some debugging output in test code that really needs to
be moved into a unit test.
Add debugging output section to the coding policy regarding debugging
output.
This introduces layer handling to a lot of the geometry routines.
Many of them don't do much with it now, but it does help multi-layer
zones and will help when padstacks are implemented.
This implements a copper-layer RTree with functions for iterating over
the elements in a copper layer and providing Nearest Neighbor returns
for BOARD_CONNECTED_ITEMS
ADDED: Progress indicator in the taskbar
This adds a progress indicator to the Windows and macOS taskbar
icons to display the progress of some operations.
Note, this requires wxWidgets 3.1+
- convert expression string tokens to single-quote-delimited
- fix bug where netclass assignments weren't getting updated after
board setup dialog
- move property manager rebuild to lazy evaluation
- improve performance with wider use of const&
- retire DRC_SELECTOR stuff
- use wxString for GUI stuff (particularly translated stuff)
- fix EqualTo() to return false instead of asserting when op types
don't match
- fix buffer overruns with fixed-size string buffers
- make expression function calls case-insensitive
- integrate expression errors into rule parser
- produce more and better error messages
- keep BOARD_ITEM ptrs const as long as possible
- fix a couple of uninitialized variables
This moves the program-specific code (e.g. BIU files) into
the program tests.
Also, create title_block.cpp to break a dependency that pulled
in eda_text.cpp when using the TITLE_BLOCK object.
Adds a possibility to replace properties inherited from base types with
a more specific ones. For example, such properties may have:
- different meaning which should be reflected in property name
(e.g. TRACK::{G,S}etWidth() sets actual track width, but
VIA::{G,S}etWidth() modifies the diameter)
- different set of possible values (e.g. BOARD_CONNECTED_ITEM::SetLayer()
should accept any copper layer, but MODULE::SetLayer() works only with
F.Cu and B.Cu)
Introduces classes:
- INSPECTED: base class for types taking advantage of
generic properties system.
- PROPERTY*: meta-data storing information about properties
- PROPERTY_MANAGER: singleton class to get properties data
- Fix file extension for new project
- Fixes for exceptions on MSW
- Fix some ASAN issues
- Allow SETTINGS_MANAGER to run headless
- Don't flag schematic as modified after schematic setup is closed
- Don't automatically unload projects when LoadProject is called
- Don't unload project if it's the same as the current one
- Make sure to properly init/de-init template field names
Various architecture upgrades to support this.
Creating a BOARD now requires a valid PROJECT, which caused
some (mostly transparent) changes to the Python API internals.
ADDED: Project local settings file
CHANGED: Board design settings are no longer stored in PCB file
CHANGED: Net classes are no longer stored in PCB file
CHANGED: Importing board settings now reads boards, not just projects
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2578
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4070
1) An actual distance of 0 is still a collision, even if the allowed
distance is 0.
2) Be consitent about edges and interiors. Everyone expect the edge
of a RECT to be part of the RECT; same with a CIRCLE. SHAPE_POLY_SET
shouldn't be any different. (And SHAPE_LINE_CHAIN was a split-
personality with the edge considered part of it for Collide() but not
for PointInside()).
The arc shapes need to connect with their adjacent points. By storing
the relevant points, we allow exact point matching on both ends of the
arc as well as localize point storage.
CHANGED: All mandatory fields in derived symbols can be edited. This
not only includes the field value but also all text properties.
Kill the dual datasheet variable storage which caused many datasheet
bugs over the years. The datasheet is now always stored in the data
sheet field.
You can now choose the behavior of dragging with the
middle and right mouse buttons.
You can also choose which modifier keys to use for
panning and zooming with the scroll wheel or trackpad.
You can also customize the zoom speed, which makes
it possible to have a good zoom experience on a wider
range of input devices.
You can also now zoom by dragging with the right or
middle button if desired.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/3885
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4348
Set up a new lineage for SCH_ITEMS to get back to the SCHEMATIC
they live on: Items will all be parented to the SCH_SCREEN that
they are added to, and each SCH_SCREEN will point back to the
SCHEMATIC that it is part of. Note that this hierarchy is not
the same as the actual schematic hierarchy, which continues to
be managed through SCH_SHEETs and SCH_SHEET_PATHS.
This is a very large and potentially disruptive change so this will be an
unusually long and detailed commit message.
The new file formats are now the default in both the schematic and symbol
library editors. Existing symbol libraries will be saved in their current
format until new features are added to library symbols. Once this happens,
both the legacy schematic and symbol file formats will be no longer be
savable and existing libraries will have to be converted. Saving to the
legacy file formats is still available for round robin testing and should
not be used for normal editing.
When loading the legacy schematic file, it is imperative that the schematic
library symbols are rescued and/or remapped to valid library identifiers.
Otherwise, there will be no way to link to the original library symbol and
the user will be required manually set the library identifier. The cached
symbol will be saved in the schematic file so the last library symbol in
the cache will still be used but there will be no way to update it from the
original library.
The next save after loading a legacy schematic file will be converted to
the s-expression file format. Schematics with hierarchical sheets will
automatically have all sheet file name extensions changed to .kicad_sym
and saved to the new format as well.
Appending schematics requires that the schematic to append has already been
converted to the new file format. This is required to ensure that library
symbols are guaranteed to be valid for the appended schematic.
The schematic symbol library symbol link resolution has been moved out of
the SCH_COMPONENT object and move into the SCH_SCREEN object that owns the
symbol. This was done to ensure that there is a single place where the
library symbol links get resolved rather than the dozen or so different
code paths that previously existed. It also removes the necessity of the
SCH_COMPONENT object of requiring any knowledge of the symbol library table
and/or the cache library.
When opening an s-expression schematic, the legacy cache library is not
loaded so any library symbols not rescued cannot be loaded. Broken library
symbol links will have to be manually resolved by adding the cache library
to the symbol library table and changing the links in the schematic symbol.
Now that the library symbols are embedded in the schematic file, the
SCH_SCREEN object maintains the list of library symbols for the schematic
automatically. No external manipulation of this library cache should ever
occur.
ADDED: S-expression schematic and symbol library file formats.
This only tests the InterceptsPositiveX() and InterceptsNegativeX() used
for finding the midpoint of an arc.
Tidy up some of the trigo.h header Doxygen comments.
Replace SEVERITY_ERROR by RPT_SEVERITY_ERROR to avoid collision with a system definition.
Replace other SEVERITY_XXX by RPT_SEVERITY_XX for consistency.
Fix compil warnings and some other compil issues.
CHANGES: Symbol library file format has been converted to s-expressions.
Add support code for picking apart symbols at some future junction that
will allow full inheritance conversion of existing symbol libraries. For
now, symbols arranged by unit and body style numbers are nested for round
robin testing of symbol libraries once the parser is complete.
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme
Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
Scope: NETLIST_ITEM, CONNECTION_TYPE, ELECTRICAL_PINTYPE,
NET_CONNECTION, NETLIST_ITEM, GRAPHIC_PINSHAPE
Note, the pin type enum had PT_ added to the front to prevent
shadowing of the INPUT symbol on msys2 (see discussion at
c17c9960d8)
This also removes vector cover types which do nothing except obfuscate
the underlying implementation.
Mainly changes SCH_SHEET_PINS and CONFIG_PARAM_ARRAY (which will soon
be replaced by Jon's new stuff).
This moves EESchema DLIST structures to rtree. These changes are more
fundamental than the pcbnew changes from 9163ac543888c01d11d1877d7c1
and 961b22d60 as eeschema operations were more dependent on passing
drawing list references around with SCH_ITEM* objects.
* Split up the thirdparty code into the thirdparty folder (#3637)
* Create a new kimath static library containing all the math functions
This is part of cleaning the build system for #1906.
This is the first step to allowing non-segments in the line chain.
External routines cannot be allowed to change the line chain without
going through the internal routines. To accomplish this, we remove the
Vertex() and Point() access routines and only leave the const versions.
Transformations are given for both points as well as the chain itself.
This was re-introduced by 5d3e6e3d44
The crash happened b/c we have to manage list containers in each element
and minor adjustments cause the rest of the list to be lost. This
commit re-implements it using std::iterators and deque
Fixes#2623 | https://gitlab.com/kicad/code/kicad/issues/2623
This change completely removes the LIB_ALIAS design pattern an replaces
it by allowing LIB_PART objects to inherit from other LIB_PART objects.
The initial implementation only allows for single inheritance and only
supports the mandatory fields in the derived part because that is all
that the current symbol library file format will support. Once the new
file format is implemented and saving to the old file format is deprecated,
more complex inheritance will be added. The LIB_ALIAS information saved
in the document files was move into the LIB_PART object. This change
impacts virtually every part of the schematic and symbol library editor
code so this commit message is woefully incomplete.
REMOVE: Removed the symbol aliases concept from the schematic and symbol
editors and the symbol viewer.
NEW: Replace the symbol alias concept with simple inheritance that allows
a library symbol to be derived from another library symbol.
This update replaces the existing uses of unique pointer creation with
the C++14 std::make_unique call that provides proper memory release in
event of an exception.
The test_case_template.hpp header is deprecated in Boost, and the
latest Boost version is now throwing warnings during the build.
In Boost 1.59 (at least), this header is included transitively by the main
Boost test header, so this header is not needed by any supported Boost
version.
-Add a "wrap" option->Search results implemented as a nested list.
-Allow to go back with a "Find previous" button
-Remove the marker search option
-Fix a DLIST issue
-Add a result counter ("eg: hit(s): 1/3")
-Search history limited to 10
-Fix the search history order
-User can include or exclude references/values/texts from results
Fixes: lp:1845460
* https://bugs.launchpad.net/kicad/+bug/1845460
This means that utility programs no longer have to be manually
added to the COMBINED_UTILITY, they self-register their
information at static init time. This is basically the same concept
as the Boost test registration.
All utilities need to do now is register their UTILITY_PROGRAM info
struct with the UTILITY_REGISTRY::Register method. No headers required.
* Fix wildcard display in the file selector dialog (on GTK
it would show the regex to the user)
* Move the file extension comparison into a common function
Also rewrites the PCBNew Find dialog to make use of the above, including:
1) searching in user-defined footprint fields
2) searching in pcb text
3) a history list in the search popup
4) case sensitive searching
5) word sensitive searching
6) the ability to turn wildcard searching on/off
7) better placement of the result when the dialog obscures part of the
window
Fixes: lp:1838006
* https://bugs.launchpad.net/kicad/+bug/1838006
This changes make_lexer() so that it no longer generates a custom target
but instead attaches the generated files to an existing one (so the first
argument now is the name of an existing library or executable, and it needs
to come after the add_library/add_executable call).
The generated source is no longer listed in the project sources, as it is
added by the function. The files are generated in the build tree rather
than the source tree, and the directory is added to the include path for
the respective project as well as exported to projects linking against it.
Generated files in subdirectories are somewhat supported, but need to be
referenced with the same name as they were generated (i.e. including the
subdirectory name).
Fixes: lp:1831643
* https://bugs.launchpad.net/kicad/+bug/1831643
Fixes: lp:1832357
* https://bugs.launchpad.net/kicad/+bug/1832357
Fixes: lp:1833851
* https://bugs.launchpad.net/kicad/+bug/1833851
The QA objects link to the direct kiface objects, which creates a second
dependency on the generated lexer files. To ensure that the primary
apps are finished building them in a (potentially) different thread, we
set a false dependency on the final build product in the qa CMake.
Fixes: lp:1833851
* https://bugs.launchpad.net/kicad/+bug/1833851
The returns of KiCad file extensions on GTK contain basic regex matching
case-insensitive file extensions. We need to match these in the
provider and tests
It's a bit of a hack because they're statically initialized and
so we can't make use of the _() macro. We do still want it in the
code, however, because the string harvesting is based off of it.
Fixes: lp:1833000
* https://bugs.launchpad.net/kicad/+bug/1833000
SCOPED_TIMER is a QA-only simpler version of PROF_COUNTER.
Extend PROF_COUNTER to allow access to the std::chrono::duration
for more flexibility.
Wrap PROF_COUNTER in SCOPED_PROF_COUNTER for RAII duration
output (for the same effect as SCOPED_TIMER).
Return the EDA_DRAW_FRAME class back to common, whence it came (before it was
duplicated into legacy_wx and legacy_gal). Now there is only one
implementation (the GAL one), it doesn't need to be in a separate library.
This simplifies the dependencies for common lib users.
The dynamic ratsnest is shown while moving items but this needs to be
hidden after cancelling. Previously this was handled by the
SelectionClear event but we've changed this to (correctly) keep the
previous selection when canceling.
Fixes: lp:1831350
* https://bugs.launchpad.net/kicad/+bug/1831350
The InOutString function is not really useful, in most cases it can
be done more simple with string operator+. This function is causing
issues on MSVC (perhaps the template param names) anyway.
For some reason, older WXs on Linux (e.g. Ubuntu 16.04) would
segfault on loading the 4-tile test image. Change one tile to
a circle to fix this (presumably an old and fixed image library
function).
The bitmap pointer is not checked at copy construct. This is
an instant segfault if you copy an empty bitmap.
Fix the constructor and remove the expected test failure, from the
previous commit.
By making the caller use the "namespace" keyword, the formatter
is given the right indentation hints.
Also makes it clearer synatactically. One day, this will be a
namespace alias (needs GCC 7).
This adds a few tests on:
* LIB_PART
* SCH_PIN
* SCH_SHEET
* SCH_SHEET_PATH
These tests exercise some of the basic code paths in these classes
and show some of the expected behaviours.
None of these tests are particularly ground-breaking, but they
provide a starting point to build out further tests, and to ensure
the already-covered behaviour is stable.
It does expose some places where SCH_SHEET could probably use const.
This is done to allow access to the eeschema library
internals for purposes of test and script access, as the
DLL library has highly restrictive -fvisibility settings
that otherwise prevent the tests being able to access 99.9%
of the eeschema library functions (only a single function
is APIEXPORT'ed, therefore that's the only test we can do).
Using object libraries is a bit of a hack, and makes for
a slower link when done for multiple targets, but with the currently
supported CMake versions, it's about as good as we can get.
A better solution in the longer term may be to break eeschema_kiface(_objects)
into many smaller libraries, each of which has a much more defined scope,
rather than one big interlinked amorphous lump. This has the advantage that
each module is testable in isolation, and we get better organisation of
inter-dependencies in the codebase.
Then, the kiface DLL will gather these sub-libs and present what
is needed on the visible DLL API. Thus, we get both a testable
suite of library functions, and a restricted kiface DLL interface.
This removes the remaining hard-coded segments counts and replaces them
with the relative error calculation where the segments per arc is
determined by the maximum error we allow (smaller arcs = fewer segments)
Remove the axis numbering code from ARRAY_OPTIONS
and place in a new class, ARRAY_AXIS. This keeps
the logic for the array item numbering separate from
the logic for the array item geometry.
This simplifies the logic in the ARRAY_OPTIONS class, which
no longer has to deal with the numbering of each axis.
It was confusing that the primary frames registered their tools
differently than the other frames. In addition, since the other
frames also added their own tools, foo_actions::RegisterAllTools()
didn't really register all tool but rather those used by the
principal frame (PCB_EDIT_FRAME, SCH_EDIT_FRAME, etc.)
The angle needs to be added to the start angle.
Add tests to cover this:
* Check end point is correct
* Check midpoints are within tolerance
This would have prevented the bug fixed in 5813164d1,
as well as the bug fixed in this commit.
As well as failed tests, this manifests when routing across
Edge.Cuts arcs (unless they happen to start at 0 degrees
staritng angle).
Expose as expected failure to prove tests catch it.
Fix to follow in separate commit.
This allows CI tools to get machine-readable test reports.
By default, this is off - when you test normally, you probably
want the regular console spew.
Boost tests use the in-built Boost test command line options.
The Python tests take an --xml parameter and output the tests
there.
If neither OCC or OCE is available, the kicad2step_lib
target is not created, so the unit tests also cannot
be built. Detect missing libs and abort the test
target creation in that case.
Reverts (and fixes): 3a8ffd66c
Add a new CMake target, qa_all, which builds all
tests, tools and their deps.
Then, when KICAD_BUILD_QA_TESTS is set OFF, remove tests
and tools from the ALL target, so `make all` doesn't include
these builds.
This means even when you turn the KICAD_BUILD_QA_TESTS option
off, you still have the option to:
* Build individual tests: `make qa_pcbnew`
* Build all tests: `make qa_all_tests`
* Build all tools: `make qa_all_tools`
* Build all QA executables: `make qa_all`
This also will provide a place to hang extra logic for test routine
wrangling (e.g. by CI tools)
Update the "Compiling KiCad" dev docs.
Also, CMakeModules .cmake files should not be excluded from git
Prevent a divide-by-zero bug in SHAPE_ARC::ConvertToPolyline.
When the radius is zero, just use the initial angle (it makes
no different anyway, the result is the centre point, which is
the start point.
Add unit test of SHAPE_ARC::ConvertToPolyline.
This function has a bug when the arc is of zero radius. This
test shows the bug, but does not fix it yet.
This allows to feed any data directly into the sexpr parser. This can be
used for:
* Benchmarking, profiling and optimisation
* Fuzz testing
* Debugging
As an example, it demonstrates that a 15MB kicad PCB file (the CIAA
motherboard project) takes 1.5s to parse, and uses 140MB of heap
allocation within the Parse() method (using Valgrind massif).
This adds a test to the recent GetLayerName function, and moves
it to the base.h file for re-use for any code that needs a
layer name.
This test covers the case that caused lp:1824750 [1].
[1]: https://bugs.launchpad.net/kicad/+bug/1824750
The SEXPR class is a useful general-purpose S-Expression library
class and can (maybe) be used else where. It also should get
test coverage, as even if noone else uses it, it's critical for the
kicad2step exporter.
Also add some test coverage for some kicad2step routines. For now,
they're not useful outside kicad2step, but they are at least a useful
reference for S-Expression parsing.
On some platforms like MSVC, NaN prints as "-nan(ind)". This
is a bit needlessly ugly, so print "NaN" on all platforms
consistently.
This fixes a test failure on MSVC.
Also provide a utility function to get this path, and
a way to override at run time to quickly sub in alternative
data.
The test itself is still broken, as this plugin won't accept
a call to Load() without a KiWay.
Redesignate the eagle test as eeschema tests and build
more like the other unit tests.
Enable as a test in Ctest now that the test executes without
crashing.
The loading of the file with the hardocded part is still
not enabled, as this needs more infrastructure to support it.
Before Boost 1.64, there was no test logging function
for std::nullptr_t.
Add a logging struct to Boost to deal with this, and some
macros to assist in similar cases. These macros are bit
untidy-looking, but due to GCC bug #56480, we can't use
namespace aliasing to solve this. From Boost 1.64 onwards,
these namespaces are not needed at all.
Remove some code added to work around lack of nullptr printing
in the past.
These macros, and the nullptr printer, can be removed when
the Boost min version is 1.64 or greater.
Added checks to StrCmpNum() function in common/sting.cpp to prevent
iterating past the end of the sting. Also removed length of string
parameter since it did not seem to be used anywhere.
Fixes lp:1818157
https://bugs.launchpad.net/kicad/+bug/1818157
Add some tests of the filename splitting of WX_FILENAME objects.
Interestingly, the result of GetFuillPath on an empty path is
likely wrong as it will imply an absolute path from /. But this is
probably not a used code path. Document the current behaviour as passing
the test.
This unit tests covers the code reported by Coverity 183884 and 183894
(improper use of negative). The find_last_of can return "npos" (-1), but
it's stored as a size_t. This is correct according the WX docs,
and the substr() method it is passed to can handle npos too.
gal: pixel alignment for Cairo.
gal: pixel alignment for OpenGL
Cleanup of pixel alignment patches
gal/opengl: more pixel alignment patches:
- works on Retina displays now
- pixel alignment for circles
- correct 1-pixel strokes
- fixed unfinished 1-pixel line ends
GAL: Restore antialiasing options in Cairo
GAL: Fix arc drawing
Removes DrawArcSegment, which drew arcs whose edge was optionally
stroked (a feature that we did not use). Fixes Cairo arc drawing issue
where arcs were not visible in pcbnew.
gal: further cleanup
gal: removed unused shader parameter
When adding colors to length tuner, we depend on the window background
color, which can be set by the user, resulting in an unreadable text.
This uses the HSL conversion to detect which shade it should use for the
coloring.
Also adds test cases for round-trip HSL and HSV conversion
Fixes: lp:1814530
* https://bugs.launchpad.net/kicad/+bug/1814530
The using the "first available" numbering option, force an
artifical linear numbering scheme starting at '1'.
Start the pad name provider at the 0'th pad index.
Also adds a few related tests and adjusts tests affected by
this change to reflect that the offset still applies.
This can be expanded in future to be more general by skipping
pad (which would allow a custom start and numbering scheme
while still avoiding duplication), but for now,
this does what the UI says and avoids string changes in 5.1rc.
Fixes: lp:1814918
* https://bugs.launchpad.net/kicad/+bug/1814918
Fixes: lp:1814917
* https://bugs.launchpad.net/kicad/+bug/1814917
* Make LIB_TABLE_BASE::GetCount() return unsigned. This is more
consistent with the behaviour of STL containers (especially the
boost::ptr_vector this is really accessing). Sadly
wxGridTableBase() forces an int, so a cast is still required
at the WX interface.
* Make LIB_TABLE_BASE::At() return a reference. First, this is more
consistent with normal STL indexing operator[]'s, and secondly, it
allows an idiomatic const index method (so you can access const
LIB_TABLE_ROWs from a const LIB_TABLE_BASE).
The motivation is to allow use of this class and LIB_TABLE_ROW
in a test program, where the LIB_TABLE_BASE is const.
Some basic tests on LIB_TABLE and LIB_TABLE_ROW that demonstrate
the behaviour of fallbacks and various access methods.
Also add a few LIB_TABLE_BASE comments and changed some NULLs to
nullptr.
Libpolygon can provide its own includes via target_include_dirs PUBLIC.
This means any linking targets do not need to specifiy them manually.
As common requires polygon, the polygon dep is also now no longer
required downstream of libcommon, as it's transisitvely implied
by libcommon's target_link_libraries.
This resolves a circular dependency previously detected and also
simplifies CMakeLists.
The bitmap definitions (BITMAP_DEF and so on) do not
have any dependencies on other libs, including WX. This
means the bitmaps library can be isolated from the other
dependencies.
Common now depends on bitmaps, and libraries that depend
on common can pick it up from the common target_link_libraries,
as it is PUBLIC. This means a lot of targets no longer
need manual bitmap linkage.
This avoids a circular dependency that was previously reported
by static analysis.
Avoiding pulling in WX and other headers into the include
tree of each bitmap .cpp is a huge speed up (around 10x) in
compilation, and the generated static library is also 10x
smaller (20MB vs 200MB)
Add common as a link library to pnsrouter,connectivity.
THese library do still use common code (including bitmaps,
via base_screen.h) and this allows them to pick up the libcommon
includes correctly.
SEG collisions and distances are a fundamental part of SHAPE collision testing
and are therefore critical for DRC correctness.
Also a few Collinear tests.
This function was incorrectly processing refdeses like "U1000".
Change the algorithm to a simpler STL-compatible one and
update the tests.
Fixes: lp:1813669
* https://bugs.launchpad.net/kicad/+bug/1813669
This breaks the following functions out to a general-purposed refdes utils
header:
* MODULE::GetReferencePrefix()
* kicad_string.h RefDesStringCompare()
This acheives:
* Slimming of MODULE interface
* Placement of refdes code in common rather than pcbnew
** Testing of this code in qa_common
* Tighter and smaller includes for code that only needed refdes functions
Note: there are failing tests commited (as expected failures). These
are the cause of lp:1813669 and will be fixed as a follow-up commit.
This is not logic specific to MODULE. Breaking it out to
kicad_string.h acheives:
* Slimming of the MODULE interface
* Enables reuse of the function
* Enables testing of the function
Also add a test under qa_common for this function.
The current module cannot be queried for existing pads as we
add them (because we never commit, until we finish the whole array).
Instead, pre-gather the names and check as we add, skipping any existing
names.
Note: this will not prevent arrays becoming "mis-ordered", but there
is not a lot we can do to prevent all possible errors.
Fixes: 1808706
* https://bugs.launchpad.net/kicad/+bug/1808706
The same principle could be used to skip existing ref-des'es on PCBs.
The geometry and numbering logic is separate to the dialog, and
can be separated for clearer logic and better testability.
Moreover, refactor it to avoid any dependency on pcbnew
classes, so it can be move to common for potential re-use in
eeschema and friends in future.
Also convert all wxPoint logic in these classes to VECTOR2I and
fix some function visibilities.
Add some unit tests of the ARRAY_OPTIONS geometry and numbering.
Move into own include directory for clarity. Also allows qa_utils
to use its own private headers in qa/qa_utils without exposing them
through the target_include_directories directive.
This test assumed points on a edge are counted as colliding.
This is not true: points on an edge are NOT counted at inside
the poly_set.
THe test does still consider points on a *hole* edge as collisions.
The API to SHAPE_POLY_SET is unclear on if this is correct.
Several pcbnew_tools utilities read a file from the command line.
Instead of replicating this code, centralise the code in
qa_pcbnew_utils, which allows simpler reuse.
THe utilities are:
* polygon_triangulation
* polygon_generator
* drc_tool
pcb_parser keeps its own function, as that is the focus of the tool,
and its likely to have its own instrumention.
This also adds the ability to read from stdin for the above tools,
which means fuzz testers could theoretically work with them, and it
also can make life easier if you can pipe a board to the executable
directly.
The "refactor" element of qa_shape_poly_set_refactor has been
previously removed, so these tests are now just regular tests on
libcommon classes. These can therefore be moved to qa_common
and the qa_shape_poly_set_refactor unit test suit can finally be
totally removed.
This adds a simple unit test to qa_common to check coroutines
produce expected events in the right order.
This is an automated analogue to the user-facing tool in
qa/common_tools.
This program has been disabled for some time, but it's not
broken (even if the CMake was!).
Merging into the pcbnew_tools QA program reduces the CMake burden
and puts this tool in the same place as the others.
This means all the current Pcbnew utilities are all in a single
executable.
The tool is now run by:
$ qa/pcbnew_tools/qa_pcbnew_tools pcb_parser <same arguments as before>
Add a tool that allows a user to run DRC functions
on a given KiCad PCB file.
The first available functions are the courtyard functions.
Also move most of the utility program logic into qa_util for
better reusability.
Introduce the concept of a DRC_PROVIDER which allows
to separate the various DRC functions to their own
areas. This allows, amongst other things, a slimmer core
DRC class, and allows DRC functions to be separately testable.
The courtyard DRCs (overlap, missing and malformed)
are the first victims, so instrumentation can be added to this function.
Add some unit tests on this DRC function, as well a few re-usable PCB-based
utility functions in a library (qa_pcbnew_utils) that could be shared between
unit tests and other utilities.
The intention here is to make it possible to wrap up many of the
KiCad utility tools into a single executable. This reduces link times
as well as the duplication of CMake files needed to build very
similar tools.
This particular tool should be suitable for any code in common,
code in pcbnew and other end-executables probalby will need an
analagous version linked to the relevant kiface.
The first tool is the coroutine_example.cpp test case, which
can be useful when learning, debugging or porting the coroutine
infrastructure.
This reverts commit decc7ed888.
This compilation options (-fpermissive) is no longer needed,
as the code that caused the warnings on GCC <7 is no longer
present.
The reason this error was GCC bug #56480 [1], which disallowed
the following (valid, in C++11) syntax:
template<> struct namespace_a::namespace_b::a_struct<TYPE>
{...}
And instead insisted on:
namespace namespace_a {
namespace namespace_b {
template<> struct a_struct<TYPE>
{...}
}
}
[1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=56480
An unhappy conjunction of GCC bug #56480 [1] and Boost having
different namespaces for the print_log_value make it quite
ugly to support this method.
For the limited purposes of the unit tests, a free function in
the unit_test_utils header (in the absence of any implementation
in the main libraries) will do, even if it is a little intrusive.
From Boost 1.64 onwards, the customisation point boost_test_print_type
is avaiable, and anyt print functions should be transitioned over to
that method when the minimum Boost version is 1.64 or higher.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=56480
Test a few "centre-point-angle" cases and add some
generic geom code for testing vectors and boxes are within
tolerance (since rounding often creeps in).
Much of the arc-checking code will be useful to other
construction methods (e.g. point-point-point).
There are expected failures for the bbox code when
the arc passes though, but does not end on, a quadrant point
(0, 90, 180, 270). This is due to a defective
implementation of SHAPE_ARC::BBox() that does not take
into account the quadrant points. This will be fixed
as a follow-up.
Use the AddFileExtListToFilter() to also generate the
wildcard for "all files". This is because:
* Users can use AddFileExtListToFilter for the all files WC
with the same interface as for any other extensions.
* Users do not need to worry about wxGetTranslation, as the
_() is applied in the same way as the other *Wildcard() helpers,
and it is a function just like the others, so it is consistent
* There is a testable interface to document the expected result.
The test is added.
Varargs make it very hard to pass strings in flexibly
when they (and the number of them) are not known
at compile time.
For example, this allows up to now amalgamate the "single
ext" and "multiple ext" unit tests.
This adds a unit test for the recent AddFileExtListToFilter
to demonstrate how to use it and the expected output.
The unit tests are a bit clunky, as the vararg approach cannot
work winth strings passed at runtime.
It was added when refactoring the SHAPE_POLY_SET class, ande replace any use of CPolyLine class inside Kicad code.
the CPolyLine related code is now not used.
So this test nowadays makes no longer sense.
Also modify the linkage of kiface objects, as this is not
supported by older CMake versions.
This was accidentally removed with the reversion of the application
of the wrong patch (8f11a2133).
QA: fix object files
Some functions aren't defined on Boost < 1.59, which is
sadly inclusive of the Ubuntu LTSs.
Make some guards so you can still use these on the newer
Boosts with some useful fallback where possible.
Devolve the logic as to whether a pad should be numbered or not
to a pad utility function. Add a very simplistic test for this
function (demonstrating how to test BOARD_ITEMs in general).
Fixes: lp:1804787
* https://bugs.launchpad.net/kicad/+bug/1804787
The intention here is to make it possible to wrap up many of the
KiCad utility tools into a single executable. This reduces link times
as well as the duplication of CMake files needed to build very
similar tools.
This particular tool should be suitable for any code in common,
code in pcbnew and other end-executables probalby will need an
analagous version linked to the relevant kiface.
The first tool is the coroutine_example.cpp test case, which
can be useful when learning, debugging or porting the coroutine
infrastructure.
The reduces a little bit of WX dependency, and makes
the timing code a bit more type-safe.
Also adds a more testable interface for the accelerated
zoom controller.
This is done to avoid a big chunk of conditionally-compiled code
in the middle of the event function.
Also separates the zoom logic from the WX_VIEW_CONTROLS object
and isolates it in a separate class behind a clearer interface.
Add some simple tests for sane steps on GTK+3-sized scroll
steps.
Due to the implicit floor of the cast from double to unsigned char,
there was a small rounding error in COLOUR4D's WX conversion function.
This fixes the failing tests.
Also make the cast to unsigned char explicit.
This includes:
* Linkage against the Boost unit test libs
* Configuration of the Boost libs
* A place for common generics "extras" for unit test harnesses
including
* A simple way to allow "expected-failure" tests (without
breaking Boost < 1.58, e.g. Ubuntu LTS)
* Moving some simple numeric predicates from the geom tests
to the utils library.
Expand unit test docs to describe the expected failures macro.
Add a few COLOR4D tests, including one with expected failures due
to a pre-existing bug. This will be fixed in a follow-up commit.
Jeff Young
Dominik Wernberger
Wayne Stambaugh
Seth Hillbrand
Jon Evans
Ian McInerney
Marek Roszko
Tomasz Wlostowski
Roberto Fernandez Bautista
jean-pierre charras
qu1ck
Michael Kavanagh
Mikolaj Wielgus
Thomas Pointhuber
Qbort
Joshua Redstone
Maciej Suminski
Sylwester Kocjan
Simon Richter
Fabien Corona
John Beard
Seth Hillbrand