Commit Graph

194 Commits

Author SHA1 Message Date
Roberto Fernandez Bautista 7a71ebf9ac CADSTAR PCB: Load all three net properties into a single Netclass
The final netclass name will be a bit long but it will allow for custom
DRC rules to individually target each of the three properties available
in CADSTAR:
- Route Code (which specifies width of the track in min, max, opt)
- Net class (only used in signal integrity analysis)
- Spacing class (for specifying clearance requirements between classes)
2021-10-10 22:16:08 +01:00
Roberto Fernandez Bautista ac3ade874e CADSTAR PCB: Set Copper-to-Hole clearance as 0
Testing suggests that CADSTAR doesn't actually have any clearance to the
hole (other than electrical clearance to the barrel of the padstack/
viastack).

This removes a large amount of DRC violations on imported designs.
2021-10-10 00:20:13 +01:00
Roberto Fernandez Bautista eb7d0fdf8a CADSTAR PCB: Use board clearance + additional isolation as zone clearance
Copper-to-copper clearance is too onerous and results in large amount
of DRC errors for the majority of imported designs.
2021-10-10 00:18:36 +01:00
Roberto Fernandez Bautista f4ff01a5ab CADSTAR PCB: Copy default netclass settings when creating new ones
Ensures that the global clearance is preserved in the newly created
netclass.
2021-10-09 23:10:55 +01:00
Roberto Fernandez Bautista 8f74085ca4 CADSTAR PCB: Handle older boards without construction layers
Use KiCad default stackup for older CADSTAR boards that do not
define any dielectric layers between the electrical layers.

Also fix default stackup calculation to ensure finished board thickness
is 1.6mm
2021-10-09 21:26:16 +01:00
Roberto Fernandez Bautista 33a3cfc87b CADSTAR PCB: Update Board Design Settings to notify that a stackup exists
Also update thickness of the PCB

Fixes https://gitlab.com/kicad/code/kicad/-/issues/9307
2021-10-09 20:33:14 +01:00
Roberto Fernandez Bautista e80a1c2679 CADSTAR PCB: Don't load items on invalid layers
This was happening in two cases:
- Loading documentation symbols (CADSTAR on purpose defines these in an
  invalid layer)
- When an item was in a "layer set" such as ALLELEC or ALLLAYER - need to
  make sure we remove the copper layers that are not active in the design
2021-10-09 20:07:23 +01:00
Roberto Fernandez Bautista 677166f0b8 CADSTAR PCB: Rule Areas have zero width
Cadstar areas have a line width but this is only for display purposes.
Instead CADSTAR uses the center line when determining whether a DRC
violation occurred.
2021-10-08 21:27:32 +01:00
Roberto Fernandez Bautista 2dfbd42be6 CADSTAR PCB: Legacy netclass and design settings loading is required 2021-10-08 20:48:10 +01:00
Roberto Fernandez Bautista ae0229b7c9 CADSTAR PCB: Add imported nets to the imported netclass. 2021-10-08 20:25:09 +01:00
Roberto Fernandez Bautista 58fc4f512d CADSTAR PCB: Don't create zero width tracks
Fixes a bug in the route offsetting part of the import
that was resulting in zero-width tracks being imported.
2021-10-08 20:25:09 +01:00
Roberto Fernandez Bautista 16b61e47cd CADSTAR PCB: Clear arcs from polys before boolean ops (e.g. zone fills) 2021-10-08 20:25:09 +01:00
Roberto Fernandez Bautista fb588da875 CADSTAR PCB: Fix loading of thermal relief gap in zones
We were loading as solid fill when the relief gap was exactly the
same as the minimum width.

Also we can do better than just load as solid fill when it is smaller:
we can instead just use the minimum width and at least it still will
have thermal reliefs.
2021-10-08 17:39:08 +01:00
Roberto Fernandez Bautista cb47bf25c0 CADSTAR PCB: Actually load the original route code as a KiCad NETCLASS
We weren't actually loading it into the design settings even though
everything else was already being correctly loaded.
2021-10-07 22:13:06 +01:00
Roberto Fernandez Bautista 625e56676a Add progress reporting to CADSTAR Schematic & PCB importers
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8685
2021-09-11 17:50:19 +01:00
Jeff Young e6ca9837a2 Clear numbers from non-numberable pads and don't run DRC on them.
This was also the last straw on the misnamed PAD::GetName() and
PAD::SetName(), which are now PAD::GetNumber() and PAD::SetNumber().

Fixes https://gitlab.com/kicad/code/kicad/issues/9017
2021-08-24 01:03:06 +01:00
Jeff Young f221220fe2 Rename layer ids file.
It hasn't had anything to do with colors or visibility for some time
now.
2021-07-29 16:03:25 +01:00
Wayne Stambaugh 37b200cb3e Pass wxString objects by reference instead of on the stack. 2021-07-27 08:41:27 -04:00
Wayne Stambaugh 8fd83cbb95 Pass wxPoint objects by reference instead of on the stack. 2021-07-26 15:35:33 -04:00
Jeff Young 0fb864d596 Pull some name changes back from 7.0 to ease merging. 2021-07-21 20:58:59 +01:00
Wayne Stambaugh cf00319c85 More NULL expunging. 2021-07-20 07:27:18 -04:00
Jeff Young e61822c9e0 Naming conventions and a bug fix on arc points. 2021-07-19 13:17:12 +01:00
Jeff Young 062c4fda62 More error message regularization (and translatability improvements). 2021-06-28 00:45:24 +01:00
Jeff Young 0dfb5fcaf9 Error message cleanup.
wxString::Format is redundant in a wxLogXXX call.
Error messages should generally be translatable.
Error messages should use generally consistent sentence forms.
2021-06-26 22:53:24 +01:00
Jeff Young 81fc710a5d Use consistent terminology.
Fixes https://gitlab.com/kicad/code/kicad/issues/8681
2021-06-26 10:11:41 +01:00
Jeff Young 5fa5a73c6d File open/import progress dialogs.
Fixes https://gitlab.com/kicad/code/kicad/issues/6864

Fixes https://gitlab.com/kicad/code/kicad/issues/2166
2021-06-23 23:55:54 +01:00
Jeff Young 096e342386 Prefix TRACK, ARC and VIA. 2021-06-11 22:07:02 +01:00
Jeff Young 16b0147af8 Prefix DIMENSION types. 2021-06-11 17:59:44 +01:00
luz paz f968fc8719 Fix source comment / documentation typos 2021-06-09 19:32:58 +00:00
Marek Roszko 10e60acf34 Clean up including of board_design_settings.h 2021-06-06 15:03:42 -04:00
Marek Roszko 581ba21865 Remove wx includes out of cadstar_archive_loader.h 2021-06-06 09:28:02 -04:00
Ian McInerney 4f05262705 Cleanup includes in board.h and footprint.h 2021-06-03 20:19:52 +01:00
Ian McInerney 23f8851409 Remove pcb_group include from board header 2021-06-03 20:03:31 +01:00
Marek Roszko af2707929d Don't leak a wx header via eda_item.h
Turns out this provided the translation header globally :D
2021-06-02 19:18:48 -04:00
Marek Roszko a7d1ef9927 Fix some more uninitialized warnings
From PVS Studio
2021-05-30 20:05:37 -04:00
Marek Roszko 03cf2b517f Enum class PAD_ATTR_T
Renamed such that python stays the same
2021-05-01 10:51:54 -04:00
Marek Roszko b243c2280d enum class PAD_SHAPE_T 2021-05-01 08:22:35 -04:00
Marek Roszko 21fde9b629 enum class PCB_SHAPE_TYPE_T 2021-04-30 22:36:12 -04:00
jean-pierre charras e27733587d Fix 2 minor Coverity warnings. 2021-04-23 19:57:36 +02:00
Roberto Fernandez Bautista edb2136a0d CADSTAR PCB: KiCad's minimum permitted Through Drill is 0.0508mm(2mils) 2021-04-12 20:25:05 +01:00
Roberto Fernandez Bautista a3196a11a7 CADSTAR PCB: Be more specific with "allow thermal pads" DRC hack
Only tag the footprint as such when we know it has overlaping copper
over the pads with different pad numbers
2021-04-12 20:25:05 +01:00
Roberto Fernandez Bautista b5edd5f6a5 CADSTAR PCB: Fix loading of thermal pads
- Create a pad if a component copper is associated with any other pads
  in the footprint.
- Rename/renumber 'PCB Only' pads that are associated with a component
  copper and make them all use the same pad name/number.
2021-04-12 20:25:05 +01:00
Jeff Young 2cde76a191 Don't do any hole clearance testing within a single footprint.
Fixes https://gitlab.com/kicad/code/kicad/issues/8141
2021-04-11 16:03:16 +01:00
Jeff Young 3450610977 Add ability to allow thermal vias to be implemented as pads.
This is mostly just for CADSTAR.  Since we don't (yet) have general
purpose footprint attributes, this reuses the "net tie" hack.

Fixes https://gitlab.com/kicad/code/kicad/issues/8141
2021-04-09 14:02:13 +01:00
Roberto Fernandez Bautista 85efdb85b0 CADSTAR PCB: Ensure continuous track routes
When route offsetting, add an additional thin track to ensure
end point of one track and start point of the next are at the same
location.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/8131
2021-04-07 11:28:02 +00:00
Roberto Fernandez Bautista 9a764126ce CADSTAR PCB: Keep all tracks as a single chain where possible
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8119
2021-04-05 20:15:09 +01:00
Roberto Fernandez Bautista b151dd02b9 CADSTAR PCB: Fix incorrect solder mask/paste clearance
Need to divide by two as this is a clearance, not diameter.
2021-03-30 13:03:56 +00:00
Roberto Fernandez Bautista ad2043eda6 CADSTAR PCB: DrillXoffset and DrillYoffset are zero when not specified
Fixes an issue that resulted in pads being loaded 100nm off from the
original CADSTAR position.
2021-03-30 13:03:56 +00:00
Roberto Fernandez Bautista 34a435cd56 CADSTAR PCB: Handle import of pads with different paste and mask sizes
KiCad doesn't yet support full padstacks, but at least we can use the
solder mask / solder paste expansion to import a better result. Also
we can disable the specific layer if the shape has a size of zero.
2021-03-25 17:54:56 +00:00
Roberto Fernandez Bautista 107a1990c9 CADSTAR PCB: Handle route offset
The CADSTAR post processor has a peculiar feature called "route offset"
which effectively shortens tracks when the pad, track or via that it
connects to has a smaller width. This operation is not saved in the
design itself, but applied as a post processing operation meaning that
the importer has to apply it when loading on the board.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/6648
2021-03-25 17:50:33 +00:00
Roberto Fernandez Bautista 1468764f83 CADSTAR PCB: Lock footprint pads after import 2021-03-25 17:50:33 +00:00
jean-pierre charras 9a0f9575b6 Fix minor Coverity warnings 2021-03-25 09:12:24 +01:00
Jon Evans c04e19f9ac Include optimization: move some things from common.h to point-of-use 2021-03-20 12:09:18 -04:00
Jonathan Haas f90164f7cf Fix some typos and improve wording 2021-03-02 19:13:49 +01:00
Roberto Fernandez Bautista 09ebfcd650 CADSTAR Importer: Fix Code Style
- Rename member variable names to use the 'm_' prefix
- Rename a few object types that clashed with KiCad object names, such
  as BOARD and SCHEMATIC, to avoid the use of '::' to access the KiCad
  objects.
- Remove some unused code.
2021-02-22 13:24:00 +00:00
Roberto Fernandez Bautista 19d786852a CADSTAR PCB Archive Loader: Fix loading of zero sized pads
Some CADSTAR designs use zero sized pads because CADSTAR did not allow
arbitrarily assigning pad numbers: they had to be sequential. The
workaround to this was to use zero sized pads. However this causes DRC
errors in KiCad, so we load them just in a mask layer.
2021-02-10 18:49:21 +00:00
Roberto Fernandez Bautista aabe9c063f CADSTAR PCB Archive Loader: Some fixes to design rules
1. Make sure to convert to KiCad units
2. There are some KiCad rules that have no CADSTAR equivalent.
   Make a guess as to what an appropriate rule could be.
2021-02-10 18:49:21 +00:00
Roberto Fernandez Bautista 2d66abdc89 CADSTAR PCB Archive Importer: More improvements to loading of zones
Adds a new function Area() to SHAPE_POLY_SET
2021-02-10 18:49:21 +00:00
Roberto Fernandez Bautista 06c420a2a3 CADSTAR PCB Archive Importer: Improve loading of zones
Load fill state and guess zone priorities from fill state
2021-02-10 18:49:20 +00:00
Roberto Fernandez Bautista 80d8974f87 CADSTAR Archive Importer: Fix loading of non-cadstar font text sizes
Non-cadstar fonts use a width of 0.
2021-02-10 18:49:20 +00:00
Roberto Fernandez Bautista f559e94b00 Non-Kicad Project Importers: Fix the creation of project fp libraries
Adds a new function to PLUGIN GetImportedCachedLibraryFootprints() that
loads the library footprints of the board design that was imported
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7449
2021-02-10 18:49:20 +00:00
Roberto Fernandez Bautista 297ff282f1 CADSTAR Importer: Update copyright years and remove white spaces 2021-02-10 18:49:20 +00:00
Jeff Young 0bce280424 Make sure design rules get recompiled after netclass changes.
Fixes https://gitlab.com/kicad/code/kicad/issues/7082
2021-01-13 12:37:20 +00:00
Allan Nordhøy 8d81abb57a Consistent use of spaces in strings. 2020-12-30 22:57:50 +00:00
Roberto Fernandez Bautista b168b74919 CADSTAR Archive Importer: Fix position of multiline text with NO_ALIGNMENT in CADSTAR 2020-12-30 18:53:43 +00:00
Roberto Fernandez Bautista ffee24be63 CADSTAR PCB Archive Importer: Rewrite loadBoardStackup routine
Uses BOARD_STACKUP::BuildDefaultStackupList instead of trying to build the stackup from scratch
Fixes several asserts / incorrect stackups in some older boards
2020-12-30 18:53:43 +00:00
Roberto Fernandez Bautista a2cbbb963e CADSTAR PCB Archive Loader: Correctly handle Dimension text
Do not parse fields in dimension text to allow splitting it into prefix and suffix
2020-12-30 18:53:43 +00:00
Roberto Fernandez Bautista 45b621a3d1 CADSTAR PCB Archive Importer: Fix Import of Linear Dimensions (Angular dimensions not supported) 2020-12-30 18:53:43 +00:00
Roberto Fernandez Bautista fbac766254 CADSTAR PCB Archive Importer: Refactor layer mapping and fix assert
An assert was being fired to due to incorrect BOARD_STACKUP_ITEM_TYPE on some boards
2020-12-30 18:53:43 +00:00
Roberto Fernandez Bautista 0a1045300b CADSTAR PCB Archive Importer: Fix loading of net class settings 2020-12-30 18:53:43 +00:00
Roberto Fernandez Bautista cde433c82e CADSTAR PCB Archive Importer: Transfer Project to allow importing of Text Variables 2020-12-30 18:53:43 +00:00
Roberto Fernandez Bautista 03a23db4f7 CADSTAR PCB Archive Importer: Load PCB Text Variables to KiCad project 2020-12-30 18:53:42 +00:00
Roberto Fernandez Bautista 9ed4780fec CADSTAR Archive Importer: Change architecture to Parse CADSTAR fields and store them in a static map
Architecture of the parser changed to have a shared PARSER_CONTEXT between all the individual parsers.
Parses CADSTAR fields such as <@DESIGN_TITLE@> or <@SHEET_NUMBER@> and replaces with an equivalent KiCad Text Variable.
2020-12-30 18:53:42 +00:00
Wayne Stambaugh 06aa1506ee Add optional project parameter to PCB plugin load method.
The optional PROJECT parameter is primarily used for third party plugins
that need to store project information loaded by the plugin.
2020-12-18 10:40:51 -05:00
Jeff Young bb232e6ac6 Unify LIB_IDs now that both are stored in sexpr files.
Fixes https://gitlab.com/kicad/code/kicad/issues/6764
2020-12-18 00:30:26 +00:00
Roberto Fernandez Bautista 260219b0e6 CADSTAR PCB Archive Importer: Fix arc and filled shapes in footprints
- Need to call the PCB_SHAPE version of SetAngle in order to set the global coordinates for m_ThirdPoint
- Fill shapes also if in a footprint
2020-12-10 14:35:37 +00:00
Jeff Young b1f0bf7334 More consistent naming. 2020-12-08 13:05:39 +00:00
Roberto Fernandez Bautista 0691e942f4 CADSTAR Archive Importer: Fix duplicate KIID for loaded elements
Don't use clone to copy an EDA_ITEM. Use Duplicate().
Even if you give the clone a new KIID, all its children will still be clones.
Create Duplicate() in LIB_PART
2020-11-28 17:18:17 +00:00
Roberto Fernandez Bautista 71f9847601 CADSTAR Archive Importer: Only load the Master variant 2020-11-28 17:18:17 +00:00
Roberto Fernandez Bautista 78e3f917d9 CADSTAR PCB Archive Importer: Fix loading of old CADSTAR designs and Do Not Keep Upright
Older CADSTAR versions used 1/10 degree whereas newer versions use 1/1000 degree.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6437
2020-11-28 17:18:17 +00:00
Roberto Fernandez Bautista f2ba9f7ac3 CADSTAR PCB Archive Importer: Correctly load the pad numbers as per the original design
To load the pad numbers correctly we need to also check the PART DEFINITION for each component
2020-11-28 17:18:17 +00:00
jean-pierre charras 976c6262f4 French translation update (fix also trailing spaces in a few sentences) 2020-11-23 11:42:25 +01:00
Jeff Young ec020dd19f First-class support for filled shapes. 2020-11-14 01:40:32 +00:00
Jeff Young bdbb68f813 MODULE -> FOOTPRINT. 2020-11-13 16:04:03 +00:00
Jeff Young 63a54d003e More module -> footprint. 2020-11-13 15:16:24 +00:00
Jeff Young 8c947b69b0 More module -> footprint. 2020-11-13 15:16:24 +00:00
Jeff Young f5443de7f9 D_PAD -> PAD. 2020-11-13 15:16:24 +00:00
Jeff Young 2bc004eb0b Prepare for D_PAD -> PAD. 2020-11-13 15:16:23 +00:00
Jeff Young 84dd5108ba Remove some "class_" prefixes from files. 2020-11-13 15:16:23 +00:00
Jan Mrázek fc8bf6f0fe
Allow a user to remap layers in Eagle import
ADDED Allow for user mapping of layers in Eagle import
ADDED Support required and optional layers in the layer mapping dialog
ADDED Add base class for plugins supporting remappable layers
2020-11-12 11:37:04 +01:00
Jeff Young f7333ad64a Update some classnames including archaic zone names. 2020-11-12 10:31:25 +00:00
jean-pierre charras 89e21d28f0 French translation update, and minor I18n fixes 2020-11-02 20:23:01 +01:00
Roberto Fernandez Bautista 3d49f6d6f8 CADSTAR PCB Archive Importer: Import missing layer subtypes LAYERSUBTYPE_CLEARANCE and LAYERSUBTYPE_ROUT 2020-10-27 11:33:35 +00:00
Roberto Fernandez Bautista 7532428c46 CADSTAR PCB Archive Importer: Fix loading of angled slotted holes 2020-10-27 11:33:35 +00:00
Roberto Fernandez Bautista 5e7d4ca6e8 CADSTAR PCB Archive Importer: Fix Position and orientation of non-symmetrical pads
Previously they were not loaded at the correct positions
There is still a problem with angled slotted holes, but now we display a warning to the user.
2020-10-27 11:33:35 +00:00
Roberto Fernandez Bautista 0dc153fe58 CADSTAR PCB Archive Importer: Load correct pad information for pads with PADEXCEPTION
Overwrites pad definitions for pads that have PADEXCEPTION
2020-10-27 11:33:35 +00:00
Roberto Fernandez Bautista 7a1777e9b9 CADSTAR PCB Archive Importer: Parse EXITS node in PADEXCEPTION 2020-10-27 11:33:35 +00:00
Marek Roszko e928b2d8fd Split EDA_UNITS out from common. 2020-10-25 00:02:52 -04:00
Roberto Fernandez Bautista e7ab924a86 CADSTAR PCB Archive Importer: Resolve comments in MR
- Change wxASSERT(false) to wxFAIL_MSG
- Fix double negative
- Add small comment to TXT_HEIGHT_RATIO
2020-10-20 00:00:05 +00:00
Roberto Fernandez Bautista 6fb338d136 CADSTAR PCB Archive Importer: Fix imported Text Angle when mirrored
Angle needs to be negated in KiCad
2020-10-20 00:00:05 +00:00