The standard DIM() macro was not typesafe as it happily deferred errors
to runtime that can be caught at compile time. Replacing it with a
generic C++11 constexpr allows for typecasting, comparison and compile
time error checking.
The intention here is to make it possible to wrap up many of the
KiCad utility tools into a single executable. This reduces link times
as well as the duplication of CMake files needed to build very
similar tools.
This particular tool should be suitable for any code in common,
code in pcbnew and other end-executables probalby will need an
analagous version linked to the relevant kiface.
The first tool is the coroutine_example.cpp test case, which
can be useful when learning, debugging or porting the coroutine
infrastructure.
Cairo supports antialiasing when rendering but can be slow when set to
sub-pixel mode. This bumps the minimum version of Cairo to 1.12
(available in 14.04 LTS as well as mingw) to support three antialias
settings (fast, good, best) that offer speed/appearance tradeoffs.
This can provide a higher-quality eeschema render as it works on a
per-element basis as opposed to the OpenGL per-screen antialias.
wxChoice centers the selection on GTK. So when switching from a
mid-list item to an item at the top, the list is always cut off for
choice lists located on the top toolbar. Using a combobox provides a
drop-down that allows easier access to all elements in the box.
Fixes: lp:1808569
* https://bugs.launchpad.net/kicad/+bug/1808569
It avoid including these extensions in a translatable string, thus avoid breaking filter
if the translation is incorrect (It happens sometimes).
See wildcards_and_files_ext.cpp for use.
This make the use of legacy canvas on GTK3 a default-off
advanced config. Legacy is substantially broken on GTK3
and is of basically no use at all to general users on this
platform.
If the program starts with legacy canvas in the config,
it is forced into a GAL mode, as otherwise it could happen
that the user is stuck and unable to get into pcbnew to change
the setting.
Fixes: lp:1803156
* https://bugs.launchpad.net/kicad/+bug/1803156
This can be used for "advanced" options which are for developers
to use for feature-flags and other configuration. Run time config
has some advantages over preprocessor defines:
* Can be changed without recompilation
* Sensitive to XDG_CONFIG_DIR, so flipping configs is easy
* Better compiler coverage (less conditionally compiled code means
less chance to break a different configuration). Also better
analysis coverage.
* Type safe config params
* Centralised documentation: it's in doxygen, in one place
No advanced config should be required by a general users. If a general
user does use one of these configs, it's probably because:
* There is a bug and one of these configs is a workaround
* A config in here is generally useful and should be moved into the
relevant application config and given UI.
For now, the config is read-only, and is read from the
"kicad_advanced" config file in the normal config dir.
Rather than depend on proper unlocking for each exit, we move the
connectivity lock mutex into an RAII-type configuration that
automatically unlocks on exit.
The fracture() call may result in zero polygons remaining, which will
cause failure in our tesselation routine, so we need to check whether
this is a valid POLYGON before re-tesselating.
Tesselation can fail for a number of reasons. When this happens, we set
the triangulationValid flag to false to prevent using the broken
triangulation. This will fall back to the slow OpenGL triangulation
when DrawPolygon is called.
Use TesselatePolygon() to draw polygons in Gerbview instead of GLU tesselation, much slower.
Add helper methods in GAL to know if the current GAL engine is Cairo, OpenGL or something else,
useful to optimize drawing code.
Append the appropriate file extension to the file name if the file name
does not have a file extension. This is a know issue with the GTK+ file
dialog.
Make the last 3D viewer screenshot last file used code more coherent.
Add the 3D viewer main frame trace string to the trace environment
variables doxygen group.
Doxygen comment and other minor code cleaning.
Fixes lp:1804980
https://bugs.launchpad.net/bugs/1804980
GTK3 smooth scrolling is enabled by wxWidgets but not to the exclusion
of normal scroll up/down events. wxWidgets maps these both to the same
scroll handler and will fire them both if they are not handled before
being queued. Testing timestamps allows us to mark and ignore the
dupes.
This is set to GTK3 only for now as it isn't listed as a problem for
other platforms. But it shouldn't cause issues if it is enabled
elsewhere in the future.
This adds a check for contiguous board outlines to the DRC. It also
uses the calculated outline to ensure that traces are not crossing the
outlines.
Fixes: lp:1648055
* https://bugs.launchpad.net/kicad/+bug/1648055
The reduces a little bit of WX dependency, and makes
the timing code a bit more type-safe.
Also adds a more testable interface for the accelerated
zoom controller.
This is done to avoid a big chunk of conditionally-compiled code
in the middle of the event function.
Also separates the zoom logic from the WX_VIEW_CONTROLS object
and isolates it in a separate class behind a clearer interface.
Add some simple tests for sane steps on GTK+3-sized scroll
steps.
This syncs the "All" checkbox with the state of the report options such
that selecting "All" automatically selects the other boxes and
deselecting a box results in the "All" box also being unselected. This
allows a single click filtering of report messages.
Fixes: lp:1796992
* https://bugs.launchpad.net/kicad/+bug/1796992
This makes using Scrollbars more easy to use, especially for "small" page sizes like A or B.
Note also the working/drawing area size is bigger than the page size (3 times)
Factor out save current canvas view to image file code from symbol editor
code so it can be used anywhere.
Add ability to save to any image format supported by wxBitmapType. See
https://docs.wxwidgets.org/3.0/gdicmn_8h.html#a90a1eb6d85b5044a99b706fd979f27f5.
Currently only PNG output is implemented.
Please note that there is a minor bug that appears to be due to the
scroll bars which causes unfilled areas on the right and bottom edges
of the image. This always existed in the save symbol editor view
image but it was not as noticeable because by default the background
color is white. It is very noticeable in the footprint editor with
a black background.
The usual smattering of coding policy and comment fixes.
Fixes lp:1802127
https://bugs.launchpad.net/kicad/+bug/1802127
Due to the implicit floor of the cast from double to unsigned char,
there was a small rounding error in COLOUR4D's WX conversion function.
This fixes the failing tests.
Also make the cast to unsigned char explicit.
Add some unit tests on TITLE_BLOCK
This commit also requires some mocks so the libcommon stuff
can work:
* Needs a Kiface() function to be linkable
* Needs some stuff from common to be build specially
* Needs to define itself as one of the unit-having programs
to appease the units defines.
Display GALs had an incorrect world unit value set. Now the world unit
value says how many internal units are in an inch, in accord with the comments
in the GAL header. Bitmap drawing code relied on the information about DPI,
so scaling worked differently for display and print GALs.
CAIRO_PRINT_CTX provides a Cairo context created from wxPrintDC.
It allows one to prepare printouts using the Cairo library and
let wxWidgets handle the rest.
Fixes a crash when typing fast in the place footprint filter box.
Also adds a bunch more checking to GAL locking, including making
sure the same person unlocks as locked, and preventing piece-meal
calls (the RAII objects must be used).
When processing the selection filter, items were deselected before being
reselected after passing through the filter. This adjusts the logic to
only deselect those items that are filtered out.
Many operations on the selection involved getting an item by index or
dereference. The std::set needed to iterate from the beginning of the
set to find the item in its red-black tree. Using a deque that we keep
sorted, we get index access in O(1) and item search in O(lg N).
Replace all instances of wxLogDebug with wxLogTrace in the common and
kicad folders to prevent unwanted debugging output.
Add new trace flags for locale and screen object tracing.
The usual smattering of code policy fixes.
This prevents deadlocks when exceptions are thrown and the context
ends up not getting unlocked.
It also removes an earlier hack to try and minimize this which
didn't work anyway.
Getting the position of a non-position TOOL_EVENT will
now result in a wxCHECK, and a null-position (0,0) will
be returned. The new interface HasPosition() can be used
to determine if a call to a position function is safe to
make from the caller.
Fixes the underlying danger behind lp:1796045, which has
already been neutralised by a4966adb6, which avoids calling
the Position() functions when the TOOL_EVENT is not known
to be a position.
Fixes: lp:1796045
* https://bugs.launchpad.net/kicad/+bug/1796045
Block rotate and mirror now work like they do in Pcbnew (that is
they're treated as part of the block move/duplicate/whatever
rather than finishing it).
Fixes: lp:1780794
* https://bugs.launchpad.net/kicad/+bug/1780794
1) when duplicating don’t keep original hidden until end of drag
2) reset selectionArea when showing it so it doesn’t flash in its previous location
3) center a pasted block on the cursor
4) don’t draw the source selectionArea when pasting a block
5) implement selection-style highlighting for contents of blocks
6) add pasted items to view so they don’t disappear when the block is placed
Fixes: lp:1747197
* https://bugs.launchpad.net/kicad/+bug/1747197
Split antialiasing options out from display options. Move
antialiasing to common. Duplicate the rest of display options
for Eeschema.
Implement OnSelectGrid and hookup GAL canvas refresh to
SetPresetGrid.
Add Grid Settings... to View menu and move Show Grid from
preferences to View Menu to match Pcbnew.
5.0 doesn't set the GAL's line width. It gets away with this since
it's using the same GAL to measure as to set up the drawing, so
the width happens to be set correctly for other reasons. 5.1 uses
a separate GAL and so isn't so lucky.
Note: it's only the renderer that is changed from wxDC to GAL. Tools stay the same, consider this a temporary hack.
This commit splits the EDA_DRAW_FRAME, EDA_DRAW_PANEL and BLOCK_SELECTOR classes into two variants, each independently compiled into a static library.
- "legacy_wx" for PCBnew/Gerbview - wxDC-based legacy canvas. We have full GAL support there anyway so it makes no sense to introduce GAL rendering API to the legacy tools.
- "legacy_gal" for EEschema and the rest - GAL-based legacy canvas, using legacy tools but with a GAL renderer.
Such split ensures only a small part of the common library and eeschema is affected, without messing around with already GALified tools.
The commit also removes some header dependencies on class_drawpanel.h
It would appear that some platforms process the KILL_FOCUS event
after running TransferDataFromWindow(). This change makes sure
that the evaluation is done no matter the order.
Fixes: lp:1793911
* https://bugs.launchpad.net/kicad/+bug/1793911
The '/' and ':' are reserved and cannot be used in symbol or footprint
names. They will cause the LIB_ID parser and formatter to fail. While
it seems like they should be legal in symbol alias names, they will
trigger a symbol rescue the next time the schematic is loaded.
Use ID_SCH as in the Eagle schematic plugin rather than ID_ALIAS to
ensure symbol names do not need rescued the next time the schematic is
opened.
Remove ID_ALIAS since the rules for alias names are the same as the
rules for symbol names. Otherwise, allowing '/' and ':' in alias names
will force a symbol rescue on the next schematic load.
Fixes lp:1795600
https://bugs.launchpad.net/kicad/+bug/1795600
There are lot of places where constants are used in the KiCad UI
as "magic numbers". The most common one is "5", used in many
wxFormBuilder and manual UI constructions as the margin.
This commit provides a place for all UI to look up shared
constants and other functions, to help create a consistent UI using
functions that provide meaning and intent to these magic numbers.
This is in preparation for making this widget optionally read-only.
Major changes:
* Construct panel in code, not with wxFormBuilder. This make's it
easier to conditionally construct elements that won't be used
in a read-only mode (e.g. the buttons).
* Use a generic "button row panel" widget for the buttons, as the
sizing and layout logic is reusable in nearly all dialogs, and
it's simplifies layout in the higher-level dialog widget. This
widget is one example of many possible "reuable widgets".
Put the cursor and pan control TOOL_ACTIONs in ACTION,
and refer to them in that way.
The handlers are currently identical in Pcbnew and Cvpcb,
and Gerbview (and all canvases) can benefit from them as well
if they are in libcommon. Also saves duplicated code.
Fixes: lp:1795855
* https://bugs.launchpad.net/kicad/+bug/1795855
Adds Cut/Copy/Paste and Revert for footprints; introduces a new
shared Revert Changes? dialog; hooks up Add Library for footprints,
standardizes the Save As terminology.
This puts generic logic for KiCad environment vars in
one place.
Also updates the DIALOG_CONFIGURE_PATHS help to document
the new KICAD_USER_TEMPLATE_DIR and KICAD_TEMPLATE_DIR.
SEGZONE types were confusingly named PCB_ZONE_T. Zones in pcbnew are
now _only_ PCB_ZONE_AREA_T, so we name segzone types PCB_SEGZONE_T to be
clear.
This also removes processing of the SEGZONEs from connectivity
calculations.
This version makes use of lots of things learned going down the
other rat hole. Avoiding the wxComboFocusHandler is key, as well
as specifying using the AltPopupWindow.
The key handler is still tricky with respect to those platforms
that use native controls, but the starting-key strategy is similar
to the one used with wxGrid text editors.
This is caused by:
* Not checking the hotkey data is not null when performing a
hotkey action
* Allowing hotkey actions on non-hotkey rows.
This fixes both of these, and adds an assert to warn if someone
does manage to fire a hotkey action on a non-hotkey row (but it
won't crash).
Fixes: lp:1794756
* https://bugs.launchpad.net/kicad/+bug/1794756
It was possible to get conflicting hotkeys when undoing and resetting hotkeys
to defaults.
This uses the same logic as when setting hotkeys to avoid conflcits in these
other two cases.
Fixes: lp:1794730
* https://bugs.launchpad.net/kicad/+bug/1794730
This separates the "ground truth" store of hotkeys from what is shown
in the dialog. This will allow us to filter the displayed hotkeys
while keeping the same underlying data structures.
Now, the UI data items interact with an intermediate set of data, which
represents the "original" hotkey data, and the "changed" data. The
ultimate aim here is to allow UI elements to come and go, but the
hotkeys that are "in-edit" are preserved.
This also allows us to abstract some bookkeeping complexity
out of the WIDGET_HOTKEY_LIST class into a separate non-GUI
class.
This commit finishes the removal of OpenMP from the KiCad codebase.
Removed in this commit are the OpenMP calls in 3d-viewer and
qa/polygon_triangulation as well as all references in CMakeLists.txt
std::thread is used instead for multithreaded computation
Commit 73c229714 was a bit of a sledgehammer for the associated problem
of degenerate points. This commit replaces that one by only performing
additional simplification of the zone polygons on those polygons that
fail our initial triangulation attempt.
Add Display Settings to Footprint Browser.
Make each of them OpenGL on OSX and Cairo on other platforms.
Allow auto-zoom to be turned off and save last zoom setting.
Make ordering of tools in htoolbar consistent.
Standardize grid and zoom drop-downs.
Fixes: lp:1791667
* https://bugs.launchpad.net/kicad/+bug/1791667
The previous clearance values were equivalent to the default copper
clearance, which could cause issues for users who didn't adjust the
values and had alignment errors at the board house. New values default
to typical dry film minimums.
( cherry-picked from 2c5154c63 )
Fixes: lp:1786765
* https://bugs.launchpad.net/kicad/+bug/1786765
When expanding the drag item to allow corners, we accidentally picked up
other items in the list. This limits the items that can be dragged to
only those that are explicitly in the draggable list.
A side effect of this commit is that when converting from move to drag
(with tab), items not in the draggable list will be left in place.
Fixes: lp:1787966
* https://bugs.launchpad.net/kicad/+bug/1787966
It creates a lot of integer overflow in Pcbnew in Debug mode (Legacy mode), although it ha meaning onlt for the Page Layout Editor.
This function should be deprecated when the GAL canvas is used in Page Layout Editor.
Replaces Poly2Tri with updated code to process polygons faster and more
robustly. Notably, we can now handle overlapping holes in the polygons,
allowing us to cache the triangulation of complex boards
Using Title + Message wasn't working for all the dialogs which
did substitutions in the message (which was a lot of them).
Fixes: lp:1789348
* https://bugs.launchpad.net/kicad/+bug/1789348
Also fixes a bug where nets wouldn't get changed because the
pads weren't changed and so the pad nets would propagate and
wipe out the changed nets on the tracks.
Also includes warning dialogs that pad nets will be changed if the
track nets are.
Fixes: lp:1779854
* https://bugs.launchpad.net/kicad/+bug/1779854
Also updates the file menu IDs so that we can actually handle
more than 9 items in the file history.
Also adds configurable file history length to the other gerber
files (zip, drill and job).
Fixes: lp:1745729
* https://bugs.launchpad.net/kicad/+bug/1745729
Primary change is to replace most control/window borders with
AUI pane borders. We implement our own AUI border drawing
routine which avoids the ugly one-pixel white frames around
dark canvasses.
Also increases the signal-to-noise ratio of all the pane
creation code in the various frames.
This reverts the previous work-around 7d62f14dd for the RTree splitting
degeneracy that was placed prior to v5. It appears not to have worked
for all systems. In its place, we use doubles instead of floats to
calculate the bounding box when filling the RTree. This keeps maximum
volume items from overlapping with the system boundary in test cases.
Spooling up a full PLAYER in the background takes too long.
This also fixes bugs around how the tables are saved, although
that was just missing code rather than anything architectural.
Fixes: lp:1785436
* https://bugs.launchpad.net/kicad/+bug/1785436
Be more intelligent about sorting lib tree items. (Footprint
entries, for instance, come out of an already-sorted list.)
Don't recreate menus twice when laoding Footprint Editor.
More pervasive use of WX_FILENAME to avoid expensive calls to
wxFileName::SplitPath() and string concatenation.
For POSIX kernels do all the work on the file-system side so we
don't have to keep converting back and forth between encodings.
Cache the footprint info on disk (in the project).
Move timestamp-generation (and checking) to the filesystem so the
above will be bullet-proof.
Rewrite some wxWidgets classes for performance (see common.h).
This also fixes a bunch of bugs where an error during save would
still close the window (rather than cancelling the close action).
Fixes: lp:1785034
* https://bugs.launchpad.net/kicad/+bug/1785034
Put the buttons in platform-compliant order.
Get rid of SaveMultiOptions in favour of repeated standard save
dialogs with a "Apply to all" checkbox.
Fixes: lp:1783444
* https://bugs.launchpad.net/kicad/+bug/1783444
Eagle allows for variants of components to be listed in the schematic.
This patch copies the variant data into the imported schematic item,
prefixing the alternate variant names with "VARIANT_" and keeping the
alternate values.
There's no point in having both Save Symbol and Save Library when
only one can be selected at a time.
Also cleans up a bunch of extraneous icons, and fixes a few
copy/paste errors in menus and toolbars.
This removes the existing constructors so that all parsing must
be explicit and callers are made aware that they need to think
about illegal characters, malformed ids, etc.
Fixes: lp:1783474
* https://bugs.launchpad.net/kicad/+bug/1783474
Also brings horizontal toolbar in line with Pcbnew and Eeschema.
And updates the EDA_LIST_DIALOG to current practices.
This finishes the removal of the active library concept from the
Symbol Editor (started with the new component tree in 5.0).
Fixes: lp:1740717
* https://bugs.launchpad.net/kicad/+bug/1740717
This introduces a new util function in geometry_utils which snaps a vector
to axes or 45 degree lines. This can be used whenever you want to
snap a vector to these angles, but still want it to stay on a grid.
This snapping is used for the dimension tool and the ruler tool.
This is substantially simpler for two-point tools that the method
used by the line tool, which uses DIRECTION_45.
Fixes: lp:1780826
https://bugs.launchpad.net/kicad/+bug/1780826
Don't beep when inserting character from focused grid cell (but
before editor is opened).
Handle reference validation separately from name validation and
separately from user field value validation. The old way of setting
the fieldId on the validator wasn't working because the validator
gets copied.
Run validation when leaving cell. Don't just check for empty
(particularly for fields that CAN be empty).
Fixes: lp:1782917
* https://bugs.launchpad.net/kicad/+bug/1782917
(cherry picked from commit 79e04de)
Also move courtyard testing flags to BoardSettings API. Both are
still stored in the config until we decide where they go in order
to prevent prematurely disturbing the board file format.
Fixes: lp:684067
* https://bugs.launchpad.net/kicad/+bug/684067
(cherry picked from commit 5399f60)
Seth Hillbrand
John Beard
jean-pierre charras
Tomasz Włostowski
Maciej Suminski
Wayne Stambaugh
Jeff Young
Simon Richter
qu1ck
Andrew Zonenberg
José Jorge Enríquez
Mark van Doesburg