88495e5be1
Properties: Fix masking of layers for non-copper items
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12884
2022-11-24 20:34:40 -05:00
7a9467b0d5
Get rid of some gcc warnings
2022-11-24 17:05:58 -05:00
32836da14b
Don't show annular rings controls for vias that span only a single layer.
2022-11-24 18:05:37 +00:00
d6ae915616
Pay attention to layers when sorting pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10143
2022-11-24 15:47:10 +00:00
47d86e5d9e
Don't crash when canceling graphics import
...
Grouped graphics need to have their group removed from the preview
before deleting the elements to avoid reading freed memory when
redrawing
2022-11-23 16:21:06 -08:00
16db0440ba
Fix logic that was accidentally flipped in earlier commit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12962
Fixes https://gitlab.com/kicad/code/kicad/issues/12969
2022-11-23 23:10:28 +00:00
1aad2fb37b
Change via keep-start-end to be start/end, not top/bottom.
...
The implementation used to always check F_Cu and B_Cu, rather than
where the via started and ended (which will be different for blind/
buried vias and microvias).
2022-11-23 21:37:50 +00:00
5de4bfde93
Move drilled NPTH holes to hole-clearance checking. Edge-clearance
...
checking is just for milled holes (slots).
Fixes https://gitlab.com/kicad/code/kicad/issues/12980
2022-11-23 13:31:51 +00:00
e62463b52b
Don't store optimized anchors in CN_ITEMs.
...
It appears that multiple RN_NETs can refer to the same CN_ITEMs meaning
that we run into threading problems if we modify the CN_ITEM.
Fixes https://gitlab.com/kicad/code/kicad/issues/12968
2022-11-23 00:46:06 +00:00
60d42a7b1e
Spelling: fix various suppress misspellings
2022-11-22 13:47:10 -05:00
b42d5da07d
Check keepTopBottom when determining whether or not to flash a pad/via.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12961
2022-11-22 18:18:43 +00:00
8b1ffca7fa
Better reporting of nets and netclasses.
2022-11-22 14:54:08 +00:00
97fd99ec99
Re-resolve netclasses after assigning netclass to pattern.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12965
2022-11-22 14:54:08 +00:00
9403b5ce99
Unescape strings in search panel
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12963
2022-11-22 05:51:31 -08:00
50089ce558
Fix errors in handling of std::shared_ptrs.
...
We can't reset to a pointer owned by another std::shared_ptr.
2022-11-22 13:14:00 +00:00
226529235c
Mostly const safety, but also performance opt. by avoiding shared_ptr overhead.
2022-11-22 12:21:30 +00:00
740dbdf09a
De-initialize propertygrid when done
...
There doesn't appear to be a nice way to de-register wxPropertyGrids, so
we need to reach into the singleton and remove our registered editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/12297
2022-11-21 16:36:00 -08:00
0e818360c4
Unescape netnames in search panel
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12960
2022-11-21 15:47:14 -08:00
50ecb5b498
Remove errant printf
2022-11-21 15:19:45 -08:00
11130bfd88
Backing out earlier fix in favour of fixing std::shared_ptr usage.
...
Assigning to a reference to a std::shared_ptr does not update the
reference to a different std::shared_ptr; it changes what the
std::shared_ptr points to.
Fixes https://gitlab.com/kicad/code/kicad/issues/12968
2022-11-21 21:56:17 +00:00
106508f266
Split ratsnest optimization into separate parallel threads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12968
2022-11-21 18:50:44 +00:00
3b31955d98
Get hit test in group members
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12957
2022-11-21 09:28:49 -08:00
01138a2e19
Fix fillet action for lines
...
Generalize fillet action behavior to all straight lines in pcbnew
Fixes https://gitlab.com/kicad/code/kicad/issues/4742
2022-11-21 07:01:14 -08:00
c1510f07d8
Fix some issues with group bounding boxes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12958
2022-11-20 23:57:36 +00:00
0120df014e
Give group the right parent when pasting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12954
2022-11-20 22:52:06 +00:00
12a55f20d3
Fix a mistake in grip margin.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12952
2022-11-21 00:25:19 +05:00
dd2f19ca5f
Allow router cursor snapping to points on the arc.
...
Also don't disable grid snapping when holding Shift over arcs.
2022-11-20 16:56:25 +05:00
110bc6abd1
Fix router cursor glitching on H/V track segments.
...
Also don't disable grid snapping when holding Shift over tracks.
2022-11-20 16:56:25 +05:00
c5fe265eb4
Take axis inversion into account when importing graphics. Fixes #9351 .
2022-11-19 17:25:27 +01:00
9b2606018e
Fix shadowed variable.
2022-11-19 11:53:33 +00:00
bab2b6c4b6
Don't assume a 1:1 map between Altium and Kicad nets.
...
We've found at least one Altium board which has duplicate netcodes
for the same net.
Fixes https://gitlab.com/kicad/code/kicad/issues/12909
2022-11-19 11:53:33 +00:00
b82ec9595a
Allow board importing into project.
2022-11-19 11:53:33 +00:00
035031d902
BOARD_CONNECTED_ITEM::GetShortNetname(): protect against nullptr.
...
m_netinfo was not tested against nullptr in this method, although it is
tested in all other places.
2022-11-19 11:16:47 +01:00
9f0c03db94
Export STEP dialog: Fix outdated text (virtual components). Replaced by
...
"not mounted components" and added a tooltip.
No actual code change.
Fixes #12922
https://gitlab.com/kicad/code/kicad/issues/12922
2022-11-19 09:31:37 +01:00
126d224e44
array_creator: Transform item before adding, modify only the first one.
2022-11-19 04:07:35 +05:00
11dddefd05
Implement GetEffectiveShape for groups.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12940
2022-11-18 21:13:23 +00:00
38fd1c9985
pcbnew: Improve performance when something is selected.
2022-11-19 01:53:30 +05:00
c409646aad
Update message panel after rebuilding connectivity.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10122
2022-11-18 15:29:16 +00:00
24c271d508
router: GetUpdatedItems() now returns an unique_ptr to the temporary NODE so that the items it owns do not get deleted upon return from the method
2022-11-18 15:14:33 +01:00
644c76b9c6
router: follow up via force propagation interface changes in the via DRAGGER
2022-11-18 15:14:09 +01:00
dcfb35f002
router: more resilient via force propagation
2022-11-18 15:14:09 +01:00
3960f48b5d
Fix a fatal compil error on gcc.
2022-11-17 08:39:42 +01:00
bba6d503d4
Don't keep value of user or grid anchors between invocations.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12065
2022-11-17 00:51:52 +00:00
5e7c4b734c
Small optimizations in DRC and SHAPE_POLY_SET.
2022-11-17 02:10:22 +05:00
3dea146488
router: Clear rule resolver caches on routing/dragging start.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12907
2022-11-17 02:10:21 +05:00
3f790d9dae
Revert "router: Disable writing clearance cache for items in local variables."
...
This reverts commit 6d71f27500
2022-11-17 02:10:20 +05:00
cefc5268ab
Allow pads in selection and filter them for free-pads later.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12912
2022-11-16 18:37:40 +00:00
6d71f27500
router: Disable writing clearance cache for items in local variables.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12907
2022-11-16 21:19:56 +05:00
1b3f03a800
Don't feed wxWidgets negative column widths.
2022-11-16 13:33:55 +00:00
13f5c78e89
More tightening of group parent lifecycles.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12908
2022-11-16 00:42:38 +00:00
26a38797c7
router: log and replay the 'unfix' events too
2022-11-15 23:05:53 +01:00
b507c44d74
router: fix regression in Backspace (unfix/undo last segment) caused by redesign of the line placement algo
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12835
2022-11-15 23:05:53 +01:00
f9bfb8534f
Fix orientation of track netnames.
2022-11-16 00:43:06 +05:00
5759a3a10a
Fix copy/pasta from previous commit.
2022-11-15 16:01:24 +00:00
f13ffa8276
Step export: fix incorrect export of a pcb with multiple main outlines.
...
The code was existing but did not work fine with more than one outline
Fixes #6684
https://gitlab.com/kicad/code/kicad/issues/6684
2022-11-15 16:37:00 +01:00
9724f6e736
Don't allow zone filling during other editing operations.
...
It's a very heavy op, and is likely to violate all manner of
assumptions the other ops make.
Fixes https://gitlab.com/kicad/code/kicad/issues/12736
2022-11-14 23:39:49 +00:00
93c6d99a6d
Move saving preferences out of the destructor.
...
For other reasons we wrap the adapters in a wxDataObject, which has
delayed destruction semantics, but that means the settings stuff may
no longer be around when the d'tor executes.
Fixes https://gitlab.com/kicad/code/kicad/issues/12371
2022-11-14 20:01:37 +00:00
bc0a753238
Slight improvement to overly-wide checkbox columns.
2022-11-14 20:01:37 +00:00
e85a84b8a3
Fix the step export for now
...
Need to fix argparse to handle single quotes and double quotes better
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12899
2022-11-14 07:31:23 -05:00
f51db4e093
Fix some Coverity and compil warnings.
2022-11-14 09:02:40 +01:00
50dcf258e6
Adjust the position file comment header
2022-11-13 18:43:49 -05:00
d3606cb4e4
Fix position export job not running
2022-11-13 18:42:23 -05:00
f4944f0db3
Quiet clang getting its knickers in a knot over case fallthroughs.
2022-11-13 23:01:48 +00:00
9d8fdd8d53
Fire selection events from SelectAll().
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12896
2022-11-13 22:59:21 +00:00
cedef5912e
Link to zlib for pcbnew due to step
2022-11-13 17:58:41 -05:00
126914859a
Use correct pad to die lengths in DP length tuner.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12859
2022-11-13 21:07:09 +00:00
ea83449ef7
Change up the step export arg handling to single quote for now
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12890
2022-11-13 11:49:20 -05:00
0a8db3bb88
Fix forgotten handling of origin offsets
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12889
2022-11-13 09:22:59 -05:00
7089e99f4b
Integrate move individually into move algo so other commands don't choke.
...
Also adds commands to cancel and finish move individually.
Fixes https://gitlab.com/kicad/code/kicad/issues/12750
Fixes https://gitlab.com/kicad/code/kicad/issues/12749
2022-11-13 13:18:42 +00:00
365674dfdf
Footprints in the footprint editor can't be in a group.
2022-11-13 13:18:42 +00:00
6a9a1e6e65
Print hole walls if in colour (and printing real drill sizes).
2022-11-13 13:18:42 +00:00
49ff3513e7
Add missing lib (libz) in lib list to link on msys2
2022-11-13 09:29:48 +01:00
9c5fbdb040
Fix compatibility with OCC version 7.4 and older
2022-11-13 08:18:10 +01:00
066a609b39
Cleanup warnings in the step exporter
2022-11-12 21:52:54 -05:00
3dd2ae762d
Refactor step export to use our normal board processing routines
2022-11-12 21:27:10 -05:00
248181e62d
Fix Coverity and compil warnings.
2022-11-12 16:02:24 +01:00
90238dede8
PCBNEW_PRINTOUT: fix incorrect size of holes printed with the "small drill" option
...
Fixes #12880
https://gitlab.com/kicad/code/kicad/issues/12880
2022-11-12 16:02:24 +01:00
31bad5baaa
Avoid duplicating similar options in print and plot headers
2022-11-12 16:02:24 +01:00
348c3d4216
Fix an incorrect calculation in length tuning tools.
...
MEANDER_PLACER_BASE::lineLength wasn't calculating the length correctly
when starting and ending pads were on different layers.
Naturally, now jointA corresponds to the start of the path, jointB to the end.
Fixes https://gitlab.com/kicad/code/kicad/issues/12881
2022-11-12 13:11:27 +00:00
d9987e9569
Orig_items will have been invalidated by Revert.
...
Don't use it to rebuild the selection. Use the board_item flags instead.
Fixes https://gitlab.com/kicad/code/kicad/issues/12882
2022-11-11 22:57:38 +00:00
138f835672
Retire group bbox cache.
...
It's too hard to maintain when changes to other items (the groups
members) affect it.
2022-11-11 20:31:31 +00:00
3fc727bb91
Clear selection before deleting objects during conversion.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12879
2022-11-11 17:53:01 +00:00
03ba14c6d3
Tighten lifecycle management of parent group pointers.
...
Also adds some debugging to try to catch dangling pointers.
Also adds a cache for group bounding boxes (which will be expensive
to calculate for large groups).
Fixes https://gitlab.com/kicad/code/kicad/issues/12875
2022-11-11 17:27:28 +00:00
0b4fc8f50d
Fix bugs in PCB arc editing.
2022-11-11 15:00:36 +05:00
46d4861187
Use the 45-degree limit button to apply alternative constraint.
2022-11-11 15:00:36 +05:00
8b0f3f1ee7
Set keeping the center as the default arc editing mode.
2022-11-11 15:00:36 +05:00
f846bc833b
Don't error out when enumeration of footprints fails.
...
We still want to load the ones that did enumerate.
Fixes https://gitlab.com/kicad/code/kicad/issues/12864
2022-11-10 13:48:04 +00:00
36eb853570
Formatting.
2022-11-10 13:48:04 +00:00
3e3ed0f3ee
Formatting and naming. (No functional changes.)
2022-11-09 16:31:29 +00:00
da171b9665
0,0 origin isn't an option we give to the user.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12324
2022-11-09 16:20:52 +00:00
3f63f9fc57
Don't prune inner layers of through-hole parts.
...
For historical reasons we've always included ALL inner layers in these
items and changing that has uncovered several latent bugs. Rather
than find all the rest this late in the game, I went back to storing
all inner layers, even those the board doesn't currently have.
Fixes https://gitlab.com/kicad/code/kicad/issues/12863
2022-11-09 15:58:14 +00:00
63f937db85
Don't use drag origin for real drag events.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12763
2022-11-09 13:09:31 +00:00
4066850f37
Use event point to determine if we're still in draggable item.
2022-11-09 13:09:01 +00:00
85e44c2dae
pcbnew, SVG import: fix an issue for SVG files using a CR+LF end of file
...
The issue was in a validity test working only if CR+LF is not replaced by LF
Fixes #10096
https://gitlab.com/kicad/code/kicad/issues/10096
2022-11-09 09:33:51 +01:00
8b7d997a6d
Fix broken refactor
...
Don't trust the automatic refactor. It misses the strangest things
2022-11-08 20:30:30 -08:00
39774463db
Remove extra line
2022-11-08 16:35:03 -08:00
2ada7db282
Update footprint editor's board with changed prefs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12678
2022-11-09 00:30:39 +00:00
056f45cd70
Fixup most intersecting polygon points
...
Remaining is the intersecting complex pad, so this keeps the error
message when drawing
Fixes https://gitlab.com/kicad/code/kicad/issues/12806
2022-11-08 16:05:04 -08:00
2cfe78170c
Honour selection filter when picking move anchors.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12773
2022-11-08 16:27:18 +00:00
1d7c5dce70
Don't attempt to write zone-connection-layers to footprint library.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12857
2022-11-08 12:13:15 +00:00
9501f4303d
Rename CreateWindow to CreateKiWindow to avoid a collision name with a windows header
...
No code change, but it fix an issue specific to msys2 that bother me when
trying to fix issues with wx 3.0.x version
2022-11-08 12:31:07 +01:00
cb3d215b6a
Fix compil and Coverity warnings.
2022-11-08 11:53:13 +01:00
d8e9436d92
Fix step export not resolving variables
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12754
2022-11-07 23:21:48 -05:00
cd30da179a
Round out the cli with position file export
2022-11-07 19:53:35 -05:00
be8bbcaac3
Send Selected event even if the result is an empty selection.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12849
2022-11-07 19:47:51 +00:00
b5f62da5d9
Respect synthetic layer visibility when selecting footprint texts.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12850
2022-11-07 19:26:14 +00:00
ae741b93e6
Resore push/pop-less PickerTool.
...
(Functionality was accidentallly lost when we removed the opt command
strings.)
2022-11-07 19:11:12 +00:00
0b3ecdd968
Revert "Fix handling of self-intersecting polygons"
...
This reverts commit ed309e20da
2022-11-07 09:41:56 +00:00
dc6fcc262c
Pcbnew : allows overwriting viewport with same name in appearance manager.
...
Fixes #12765
https://gitlab.com/kicad/code/kicad/issues/12765
2022-11-07 09:11:49 +01:00
be29ab2c76
Need to check enabled as well as visible.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12786
2022-11-06 19:53:57 +00:00
396e220133
Non-visible layers are stored in the GPU so still have to be drawn.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12792
2022-11-06 17:37:29 +00:00
dd94b2d3a7
Rename PROPERTIES to STRING_UTF8_MAP for clarity
...
This class has nothing to do with the properties system
2022-11-06 11:51:52 -05:00
68de92313e
Properties: move to custom editor for distances; refactoring
...
Also fix display of angle values since EDA_ANGLE was introduced
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12290
2022-11-06 11:40:45 -05:00
90c5295a9f
Fix builds on non-Macs.
2022-11-06 15:07:38 +00:00
f706ac06b8
Code cleanup.
2022-11-06 11:17:54 +00:00
b385a4b60a
Implement DarkMode for the Appearances Palette.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11734
2022-11-06 00:34:45 +00:00
a03799c61e
Don't mark collisions on dragged items, only things they collide with.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8965
2022-11-05 21:54:33 +00:00
bb618f2d55
Update pointEditor after cancelled move.
2022-11-05 16:50:54 +00:00
25f06eed8c
Move zone borders back to their "host" layer.
...
Zone borders shouldn't be affected by zone-opacity control; we always
draw them in full layer opacity.
Fixes https://gitlab.com/kicad/code/kicad/issues/12438
2022-11-05 16:50:54 +00:00
0883c0ae64
Remove shadow member variable.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12830
2022-11-05 16:50:54 +00:00
7b0535e63f
My build seems to want to check this in.
...
I thought the compiled files were outside of the tree?
2022-11-05 16:50:54 +00:00
995a153f27
Update nlohmann::json to 3.11.2
...
Also update json_schema_validator to match new deprecations
2022-11-05 10:53:57 -04:00
9fafd6feff
Add missing constraint type to help.
2022-11-05 10:23:12 +00:00
c1f2ca1d8d
Make multiple names of the net on a track
...
Rather than moving the netname around, we want to keep the correct
number of netnames on a track such that there is always at least one
displayed on long tracks even when panning.
This reduces calculation time while keeping the netnames visible
Fixes https://gitlab.com/kicad/code/kicad/issues/12436
2022-11-04 11:49:50 -07:00
c95bd3fc89
Cache LOD for netname redraw
...
When panning, we should only redraw the netnames when they come into
view or go out of view. Caching the LOD provides this preventing
unneeded redraws while still redrawing on zoom changes
Fixes https://gitlab.com/kicad/code/kicad/issues/12436
2022-11-03 13:50:12 -07:00
8bc9d456c3
Fix area selection calculation
...
area was a double value for comparison of large numbers. But the
promotion from int happened after the multiplication (and overflow) for
large images
Fixes https://gitlab.com/kicad/code/kicad/issues/12821
2022-11-03 11:46:40 -07:00
d8ddeea14a
Update errors count when errors are logged.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12800
2022-11-03 17:19:59 +00:00
e33c611488
Replace collision calls with ones that work.
...
I'm not sure why the old calls didn't work, but they reported "no
collision" between two overlapping zones.
2022-11-03 17:19:59 +00:00
13b097396b
More explicit error message for unnumbered pins.
2022-11-03 17:19:59 +00:00
bc45ae1b72
Move a dialog that was hiding in the filetree
2022-11-02 22:30:46 -04:00
a234d5a2c8
common,eeschema,pcbnew: path cleanup
2022-11-02 13:29:52 +00:00
619c340d92
Handle holes when building outlines for copper sliver checker.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12797
2022-11-01 23:33:44 +00:00
1f4e51b008
Be careful of interveneing priority zones when doing divot prevention.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12797
2022-11-01 23:33:44 +00:00
ed309e20da
Fix handling of self-intersecting polygons
...
We allow temporary self-intersection but before committing, we reduce
the polygon to a single outline (optionally with holes)
Fixes https://gitlab.com/kicad/code/kicad/issues/12806
2022-11-01 13:09:11 -07:00
a5d685ff5c
Handle coordinate transforms in properties system
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12320
2022-10-31 23:01:52 -04:00
c7c4439027
Allow bezier->line/poly conversion
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12778
2022-10-31 12:48:53 -07:00
a0105efc0c
router: major rewrite of shove/walkaround single line placement. An attempt to fix most router blockages/non-45 stray segments and simplar stuff. Also adds a ton of debug geometry cruft.
...
fixes: 12258
fixes: 12067
fixes: 10807
fixes: 10632
2022-10-31 11:38:31 +01:00
70bca1b2d5
router: allow caller to override the 'safety' length limit in WALKAROUND
2022-10-31 11:17:32 +01:00
363d606503
router: improved heuristics in via force propagation algorithm
2022-10-31 11:17:32 +01:00
1ddabd4eaf
router: some extra debug geometry dumps in SHOVE
2022-10-31 11:17:32 +01:00
165b5257e8
router: temporaily disable upper corner count limit constraint in the OPTIMIZER which prevents almost any optimization of shoved lines
2022-10-31 11:17:32 +01:00
e80bdf934a
router: add via force propagation iteration limit as a user-controllable parameter in ROUTING_SETTINGS
2022-10-31 11:17:32 +01:00
247922ca2d
router: LINE::SetShape() should update the attached via position with the last point of the new line shape
2022-10-31 11:17:32 +01:00
3e67b42efd
router: fix another corner case in LINE::Walkaround
2022-10-31 11:17:31 +01:00
65507e7186
router: extend dump format to support automatic regressions tests of interactive routing scenarios
2022-10-31 11:17:31 +01:00
d289130627
fix memory leak and missing switch to "C" locale in some handlers
...
PCBNEW_JOBS_HANDLER::JobExportGerber(): disable plot pad holes.
2022-10-31 10:04:01 +01:00
ed4a40ee4f
Save state of appearance panel panes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9087
2022-10-30 19:46:15 -04:00
0a134788d0
Implement cli for gerber, drill, pdf export of pcb
2022-10-29 11:56:10 -04:00
8d44c770a8
board_commit.cpp: Avoid generating a wxAssert message in QA test.
...
In QA test, frame and selTool are nullptr.
So we cannot use wxCHECK( frame && selTool,...) because it breaks the QA test.
We just test frame and selTool when needed.
2022-10-29 16:28:57 +02:00
aca3329469
Remove superfluous Simplify call
2022-10-28 17:01:36 -07:00
01b4c20c94
Router only owns message panel when routing.
...
Also fixes a pair of copy/paste error not caught earlier.
Fixes https://gitlab.com/kicad/code/kicad/issues/12780
2022-10-28 22:51:43 +01:00
e1af4c5cf6
Pcbnew move item dialog layout improvements.
...
Don't use wxBU_EXACTFIT to define the reset buttons. On GTK, there is no
border around the button text which does looks cramped and inconsistent
with the other buttons.
2022-10-28 14:27:35 -04:00
3b3e6de515
Disable mirror commands when a single footprint is selected.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12752
2022-10-28 19:20:24 +01:00
7a874255c5
Be smarter about canceling fills
...
Handles cancellation in main fill loop. Allows loops to finish without
restarting new ones. Further enhancement might allow breaking threads
cleanly but this gets 90% of the cases
Fixes https://gitlab.com/kicad/code/kicad/issues/12693
2022-10-28 10:17:58 -07:00
24f8bf2adf
Clear Editing Board Footprint message when loading new footprint.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12783
2022-10-28 15:59:03 +01:00
78db69bb48
Don't append '+' when modifier used on its own.
2022-10-27 18:03:07 +01:00
f6c441c434
Viewport switcher keys are platform-specific.
...
Also fixes a regression where ctrl-tab doesn't get recognized.
Fixes https://gitlab.com/kicad/code/kicad/issues/11778
Fixes https://gitlab.com/kicad/code/kicad/issues/10127
2022-10-27 14:28:11 +01:00
ef17ee3384
Tooltips for layer & viewer presets.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11778
2022-10-27 14:27:19 +01:00
6a0db3e7e2
Fix Coverity warnings.
2022-10-26 14:39:44 -04:00
a7e1f668a7
Some cleanup of the cli functions
2022-10-25 23:26:23 -04:00
2b8a29b662
Try and make the svg command handling warn a little, also default the output
2022-10-25 20:17:25 -04:00
5f0ebfbfbd
Expose black&white setting for PDF plotting also
...
Also fix an issue plotting tech layers for pads in color
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12740
2022-10-25 19:06:19 -04:00
9380b9a451
Trim pad layers to current board before comparing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12758
2022-10-25 23:53:10 +01:00
c026c3af7b
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12753
2022-10-25 18:28:31 +01:00
5fe5534822
Clean up layer handling and normalize to remove magic numbers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12747
2022-10-25 12:31:47 +01:00
f480cbf93f
Treat internal copper layers as side-specific.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12726
2022-10-25 12:08:57 +01:00
20b63f305e
Sim: Ibis improvements and fixes
...
Follow-up after the KIBIS and KIBIS GUI merge requests.
- Move KIBIS from Pcbnew to Eeschema space,
- Make KIBIS obtain the Ku/Kd coefficients via the `SPICE_SIMULATOR` class instead of calling the `ngspice` executable via `system()`,
- Allow to toggle between differential and single-ended model in the GUI,
- Various GUI fixes and improvements.
2022-10-25 09:45:40 +00:00
b058ef2d87
Add the missing black and white setting to Plot -> SVG
2022-10-24 22:46:01 -04:00
960c92634f
Improve logic of Position Relative tool
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12672
(cherry picked from commit 2d2912c23d
2022-10-24 18:47:38 -04:00
d6fca11419
Finish up work on PlaceFile settings persistence.
...
We were missing several flags, and using the Plot output directory
instead of saving our own.
Fixes https://gitlab.com/kicad/code/kicad/issues/12715
Fixes https://gitlab.com/kicad/code/kicad/issues/12714
2022-10-24 22:23:11 +01:00
fa2a36b74e
Add SMD and TH settings to config, and get rid of intermediate vars.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12715
2022-10-24 19:50:59 +01:00
4778122aa0
Flip anything on a side-specific layer, rather than physical layer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12726
2022-10-24 16:54:33 +01:00
d06155f6af
Allow the search pane to highlight nets
...
Fix https://gitlab.com/kicad/code/kicad/-/issues/12551
2022-10-23 19:54:12 -04:00
2dec37f806
We must check clearance on all layers of multi-layer items.
...
(One layer may have a custom rule.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12733
2022-10-24 00:14:12 +01:00
cef7cd8f7c
Move default font to RENDER_SETTINGS.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12723
2022-10-22 21:32:42 +01:00
d78b41969f
Fix broken autosave when board is modified.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12700
2022-10-22 15:49:03 -04:00
63002cec57
Do not add a title/comment in mandatory field strings when writting netlists.
...
This is mainly for "Sheetfile" property because current it is the only one
that has a title when plotting/drawing it.
2022-10-22 12:50:26 +02:00
ce2dbdec75
Formatting and a bit of cleanup.
2022-10-21 18:41:39 +01:00
d16b23d16e
Name shortening and line-break reduction.
2022-10-21 18:41:39 +01:00
d1bf889e71
Resolve embedded text vars
...
Title Block text variables are embedded into the pcb file and should
be used for resolving when the project file is missing
2022-10-21 08:37:37 -07:00
67985510a8
Fix selecting pads of footprints in groups.
2022-10-21 17:13:24 +03:00
585fac19c6
Copy connected-only and keep-top-bottom properties.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12691
2022-10-21 00:05:11 +01:00
6fd195c389
Use comma to separate diff pair nets/netclassse rather than /.
...
("/" is problematic because it's more likely to appear in netnames.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12592
2022-10-21 00:05:11 +01:00
3451506d25
Slight performance improvement.
2022-10-20 18:37:48 +01:00
323c04af2c
Fix order-of-ops issue with calling collide before tesselating.
2022-10-20 18:37:48 +01:00
6aa515e2f8
board_stackup_manager: fix incorrect behavior when adding a new dielectric layer.
...
Fixes #12680
https://gitlab.com/kicad/code/kicad/issues/12680
2022-10-20 11:27:35 +02:00
e3842514e7
Move courtyard collision setting to preferences.
...
Also cleans up PCBNew/FPEditor edit options panel to be more in sync
with each other.
2022-10-19 11:33:11 +01:00
403cc50e7c
Don't exit group when the cancel went to another tool.
...
Also fixes a bug where the group border didn't get updated immediately
on enter/exit.
Fixes https://gitlab.com/kicad/code/kicad/issues/12669
2022-10-18 17:53:06 +01:00
8d40bf25d6
Need to setup outline mode stuff if it's turned on late.
2022-10-18 14:41:27 +01:00
1f0fa3ef63
Fix bug in new optionally-flashed via/pad zone fill logic.
2022-10-18 14:02:47 +01:00
4633d251a5
Remove single-zone-fill and unfill.
...
These are incompatible with our zone-priority-based algorithms.
2022-10-18 13:45:28 +01:00
437d2c4589
Overhaul of remove-unconnected's zone filling and drawing strategies.
...
1) The highest priority zone that a via/pad collides with "owns" its
connectivity state. Once set, lower priority zones cannot change it --
and in fact, if they would have connected to it are forced not to.
2) The connectivity state goes with the zone fill state, and therefore
must be saved in the file.
3) Display of remove-unconnected's pads is no longer done in GetViewLOD()
(which isn't called for selected items), and is instead done in PCB_PAINTER.
This allows us to draw the full pad in outline mode when a via/pad is
selected which would otherwise only show the hole.
4) Note that in some cases this will still generate DRC errors -- in
particular when a via nearly collides with a higher priority zone it
won't get "owned" by that zone and may therefore have insufficient
clearance if said zone concludes it's unconnected and a subsequent
(lower priority) zone connects to it (causing it to now become flashed).
Fixes https://gitlab.com/kicad/code/kicad/issues/11299
2022-10-18 13:05:42 +01:00
598b09821a
Coverity fixes.
2022-10-17 15:30:20 -04:00
92f1ee556f
Don't fill drawing sheet rects with transparent fill.
...
It might make sense to do that with board and/or schematic items for
hit-testing or something, but it definitely doesn't make any sense for
the drawing sheet border.
Also, when reading in items with a transparent fill, treat them as
unfilled (otherwise we get filled with layer colour in at least PCBNew).
2022-10-17 17:51:11 +01:00
413fd82813
Re-entrancy guard for router tool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12604
2022-10-17 13:21:07 +01:00
46752499df
We need both a tool-oriented delete and one that doesn't push/pop, etc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12600
2022-10-17 13:21:07 +01:00
f3bb34779a
TransformTextShapeWithClearanceToPolygon() add optimization for 3D viewer.
...
This function convert a text shape to a set of polygons for the 3D viewer.
Texts shapes are a bit special and can generate a lot of small overlapping polygons.
These polygons are now merged before being added to the list of polygons handled
by the 3D viewer draw functions.
Locally merging polygons is usually not efficient but in this case it can speedup
the 3D viewer (up to 10x).
Mainly noticeable for silkscreen layers when the "copper" thickness is shown
2022-10-17 07:32:30 +02:00
3e53426b6c
Use same ratsnest colours in the router as the rest of KiCad.
2022-10-16 22:21:14 +01:00
e9f8454a67
No DRC engine in footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12658
2022-10-16 18:39:37 +01:00
631980b0ab
We were saving the old board pointer, but not updating the current one.
...
This also makes a few other adjustments to order and to where we look
for the enabled layers which should make it more robust.
Fixes https://gitlab.com/kicad/code/kicad/issues/10925
2022-10-16 18:39:37 +01:00
73e1676bdb
Fix const-reference property access.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12639
2022-10-15 20:22:38 +01:00
d1fb32f26c
Formatting.
2022-10-15 19:09:25 +01:00
4af98827fd
Revert change for 11299, and update removed-pad items after zone fills.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12645
2022-10-15 16:06:57 +01:00
b012cc1ac3
Don't resolve footprint text variables in footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12658
2022-10-15 16:05:22 +01:00
0d7185c2ff
Fix mismatch between PCB_VIA defaults and file format defaults.
2022-10-15 11:17:58 +01:00
a855c9a40c
Fix not handled exceptions.
2022-10-15 10:27:00 +02:00
8098db2a20
BuildBoardPolygonOutlines: enable multiple main outlines: it works fine in 3D viewer.
2022-10-15 09:33:27 +02:00
697056fa7e
Correctly sort positions for default align
...
When not aligning under mouse cursor, choose the X-most element where X
is top/bottom/left/right. Previous sorting was not correct for two
directions
Fixes https://gitlab.com/kicad/code/kicad/issues/12627
2022-10-14 16:15:06 -07:00
7ffdfb1067
Clear Scintilla undo history after setting initial text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12650
2022-10-14 22:01:20 +01:00
6f9bc0980b
Refactor poly outline generator to handle multiple outlines.
...
Note: disjoint outlines are handled in footprint courtyards, but not
for board outlines.
Fixes https://gitlab.com/kicad/code/kicad/issues/7660
2022-10-14 20:32:04 +01:00
6357c83a8c
Debug code to try and catch Undo/SyncWorld mismatch.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12640
2022-10-14 13:25:25 +01:00
07d9671126
Repair unbalanced UndoRedoBlock call.
2022-10-14 11:44:04 +01:00
b01bf081d8
Cleanup.
2022-10-14 11:12:25 +01:00
de5980b92e
Share more of the courtyard collision highlighting code.
2022-10-14 10:42:07 +01:00
11dc5424cb
Pull interactive courtyard checker out of move tool to share with router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-14 00:48:37 +01:00
8f1b4a9c03
Include cleanup.
2022-10-13 23:15:41 +01:00
3090363cd5
Copy via flags down to the level the router consumes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12591
2022-10-13 17:41:42 +01:00
46a41e2e34
Pin 0-sized pads at 1um rather than throwing them out.
...
(See bug report for more commentary.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12617
2022-10-13 14:47:50 +01:00
08260661b8
Force flashing when generating SOLIDs.
...
We only have a single SOLID per pad, so the solid's shape must always
be the flashed shape and then we can do layer-specific flashing tests
internally.
Fixes https://gitlab.com/kicad/code/kicad/issues/12458
2022-10-13 13:05:51 +01:00
d1450e1802
Commenting.
2022-10-13 13:05:51 +01:00
8b9cbd5805
Don't reset editPad if it still exists after model reset.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12630
2022-10-13 00:07:30 +01:00
efa14e501c
Cleanup.
2022-10-12 16:36:54 +01:00
d0d625dcb5
BOARD_INSPECTION_TOOL::LocalRatsnestTool(): set a suitable cursor when activated.
2022-10-12 15:56:41 +02:00
bd1114d94d
Move footprint properties dialogs to symbol properties grid resizing strategy.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9883
2022-10-12 00:38:44 +01:00
e02c05d38f
Add unit and eval support to WX_GRIDs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1871
Fixes https://gitlab.com/kicad/code/kicad/issues/4285
2022-10-11 23:40:58 +01:00
c9f11827a7
Don't connect disparate nets
...
Only some elements get their nets assigned based on connectivity. Other
elements should be keps in different clusters for connection
Fixes https://gitlab.com/kicad/code/kicad/issues/12622
2022-10-11 15:03:51 -07:00
57a6aeb86a
Redraw ratsnest after removing teardrops.
...
No, I don't know why this is needed. But after a couple of hours trying
to chase it down, return-on-investment is fading....
Fixes https://gitlab.com/kicad/code/kicad/issues/12420
2022-10-10 21:07:18 +01:00
83310659fd
Basic geometry: R != D.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12601
2022-10-10 19:18:37 +01:00
8470b178cd
Use actual pad shapes or built outline instead of effective shpaes for anchors.
...
The effective shapes don't work very well in the custom pad or rounded
rectangle cases, and they're somewhat slower in some of the other cases.
Fixes https://gitlab.com/kicad/code/kicad/issues/12601
2022-10-10 18:11:32 +01:00
3221877fe8
Push autosave-require down in to EDA_BASE_FRAME.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11790
2022-10-10 14:03:52 +01:00
be6f08deca
Code clarity. (No functional changes.)
2022-10-10 14:03:52 +01:00
b2f05c758b
We don't always have a line when dragging.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12612
2022-10-10 11:44:17 +01:00
ea6fb84351
Formatting.
2022-10-10 11:44:17 +01:00
6bc00eabaf
dialog_dxf_import dialog minor UI fixes
2022-10-10 02:51:24 +00:00
35a14b8e5d
Better error messages (and make an empty pad an error, not a warning).
2022-10-09 20:28:54 +01:00
e866dfe137
Avoid trying to draw empty pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12605
2022-10-09 20:28:54 +01:00
4a66203493
Update zone layers for all layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12128
2022-10-08 23:27:59 +01:00
3b63ce8a48
Don't use the 3d resolver config anymore
2022-10-08 14:27:10 -04:00
27f8abd8a1
Fix compatibility with wxWidgets 3.0
...
change wxOVERRIDE -> override
2022-10-08 17:34:37 +02:00
faae4f9eea
kicad2step: force immediate printing of messages (mingw issue: we need to flush the stdout buffer)
2022-10-08 16:43:14 +02:00
aaa1d166a7
Redirect step export output to a pretty window
2022-10-08 09:48:00 -04:00
51c20da93e
Areas might have layers defined in area as well as rule.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12584
2022-10-07 23:52:47 +01:00
79dabdd484
Fix typo.
2022-10-07 23:52:47 +01:00
2577ebb94d
Increase dynamic ratsnest opacity for better visibility.
2022-10-07 21:50:12 +00:00
04fec5016b
Add keepout zones set to keepout footprints to footprint courtyard checker.
...
(This is for the move tool, not DRC. DRC uses more sophisticated keepout
processing which is too slow for the move tool, and doesn't let us know which
keepout area collided for collision highlighting.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-07 22:23:37 +01:00
d6f1d5da76
Start-routing list needs to be a white list, not a black list.
...
We check the collisions later in the same routine, which is where all
the black-listed objects come in.
Fixes https://gitlab.com/kicad/code/kicad/issues/12595
2022-10-07 18:18:02 +01:00
b8dfbe02ad
Fix some issues in STEP exporter
2022-10-07 18:53:31 +02:00
bc58480e24
Missed some other uses of m_startItem in previous commit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12592
2022-10-07 14:01:46 +01:00
cbb997a3b5
Use GetCurrentNets(), not m_startItem for message panel updates.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12592
2022-10-07 10:34:11 +01:00
01a1d148e6
Make a sentence understandable and translatable.
...
Fix a minor compil warning
2022-10-07 10:11:02 +02:00
Jon Evans
Jeff Young
Seth Hillbrand
Mike Williams
Alex
Kliment
jean-pierre charras
Tomasz Wlostowski
Marek Roszko
Sylwester Kocjan
Wayne Stambaugh
Fabien Corona
aris-kimi