Adds QA checks to copper sliver tests. Adds the following checks:
- Dot product between two arms (quickly avoids checks for >90°)
- Checks the sliver is convex (area test)
- Eliminates minor slivers with angles that are approximately 0 and ones
with the opposite side width beneath a configurable level
- Updates Clipper2 to fix a couple of jagged edges on inflate
- Adds simplify during zone fill inflation to limit jaggies
Fixes https://gitlab.com/kicad/code/kicad/issues/14549
There are problems internal to GTK that mean creating choice boxes with
a lot of items is a very slow process. This hack works around one of
those issues to make it faster to create and display the menu in the
choice box.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14277
This library is meant to move non-EDA items (language extensions,
library extensions, etc.) into the lowest-level of our dependency chain.
This library should never depend on anyother non-thirdparty code in the
kicad codebase.
acos(1) returns 0, so this implies infinite segements to get to 0 error.
This is not reasonable but might be encountered in bad arcs or circles
that have 0 radius. Instead of returning infinite or std::max segments,
we limit the error to be at least 1 IU
Rounded line ends when deflating leads to microscopic jags in the
outline that are not visible but add substantial computation time and
minor error when computing polygon offsets.
Instead, the chamfer deflate method prevents these jagged lines by
clipping angles < 90° by the error level. This does not impact deflate
calls where we explicitly require the angles to be maintained
Nominally, the zcode of a vertex is unique. This is not 100% true,
however, as we must interlace two 32-bit numbers into a single 32-bit
number. Sorting needs to account for the possibility that the zcode
will be the same while other elements of the vertex are different. This
commit fixes the broken boolean logic to more clearly handle these cases
Fixes https://gitlab.com/kicad/code/kicad/issues/13867
Just testing a single point to find copper that is outside the board works
until the arc->segment conversion moves the board outline just enough to
have the filled copper slightly (few IU) outside of the converted outline.
Instead, we do an expensive check of comparing the size of the
intersection between the island and the island's intersection with the
board. If the intersection is at least half as large as the original
island, we can say with certainty that the island is inside. The margin
could be much smaller than half but this preserves the intent without
picking an arbitrary number that might be violated
Fixes https://gitlab.com/kicad/code/kicad/issues/13717
The segment iterator creates segments when needed, so using it in a dual
loop creates NlgN more copies than we need. This shifts to a single
copy algorithm that then uses a sorting to preemptively abort the search
once the segments are outside of the search bounding box
Fixes https://gitlab.com/kicad/code/kicad/issues/13191
If the poly set is self-intersecting, the triangulation may be
problematic and the full set needs simplification before. We don't do
this uniformly because the simplification can be a slowdown if it is not
needed
Fixes https://gitlab.com/kicad/code/kicad/issues/12806
For unknown reasons, Clipper2 only returns Paths structures from the
ClipperOffset::Execute routine. Further, the Paths are not properly
ordered (outline->hole in outline, outline2->hole in outline2).
To get proper hierarchy, we need to run an additional pass of the
solution with the paths as Subject in a null union. This is effectively
a Simplify() call but we keep the data in Clipper format to reduce the
churn/calc time
Some clipper cases do not get resolved with the `FAST` mode, so in those
cases, do a second pass in the `SIMPLE` mode. If both fail, return a
broken polygon instead of an infinite loop
Fixes https://gitlab.com/kicad/code/kicad/issues/12761
In Clipper1, we had a flat tree structure on returns. Clipper2 nests
these, so we need to properly handle the nesting structure when
importing the polygons
Currently this lives behind the advanced config flag `UseClipper2`.
Enabling this flag will route all Clipper-based calls through the
Clipper2 library instead of the older Clipper. The changes should be
mostly transparent.
Of note, Clipper2 does not utilize the `STRICTLY_SIMPLE` flag because
clipper1 did not actually guarantee a strictly simple polygon.
Currently we ignore this flag but we may decide to run strictly-simple
operations through a second NULL union to simplify the results as much
as possible.
Additionally, the inflation options are slightly different. We cannot
choose the fallback miter. The fallback miter is always square. This
only affects the CHAMFER_ACUTE_CORNERS option in inflate, which does not
appear to be used.
Lastly, we currently utilize the 64-bit integer coordinates for
calculations. This appears to still be faster than 32-bit calculations
in Clipper1 on a modern x86 system. This may not be the case for older
systems, particularly 32-bit systems.
SHAPE_ARC::IntersectLine() fails when one of the arcs start points
is on the center point of the other -- in this case we can't extend
the line to the arc intersection because one point does not define
a line....
Fixes https://gitlab.com/kicad/code/kicad/issues/12609
Oh dear, there was a bunch going on here. Firstly the move from int
to long long int for ValueFromString() means that we were no longer
catching overflows (as we were C-style casting it back to int in many
places). But even when the overflow is caught, it would run in to
wxWidgets' empty string bug while trying to log it.
Fixes https://gitlab.com/kicad/code/kicad/issues/12577
The hash table for integer hashes is extremely limited and places most
elements in the same buckets. This leads to a linear search time for
structures built on this.
This blocks hashes, directing the coder to utilize std::set or std::map
structures instead of hash tables for implementing integer-based
lookups.
1) Move a bunch of std::map's to std::unordered_map to get constant-time
look-ups
2) Lengthen progress-reporting intervals to spend more time doing work
and less time talking about it
3) Reverse order of SHAPE_LINE_CHAINs in thermal intersection checks to
make (much) better use of bbox caches
4) Don't re-generate bboxes we already have
5) Fix some autos that weren't by reference (and were therefore copying
large datasets)
6) Rename delta progressDelta so it's easier to search for in future
7) Get rid of a few more autos (because I don't like them)
8) Pass large items to lambdas by reference
Fixes https://gitlab.com/kicad/code/kicad/issues/12130
The change in c9c31fcbc2 missed a number of cases. This reverts back to
the system as it existed before 2be352b9f9
but using the revised method of determining A-B-C distance and avoiding
resizing the arrays
(cherry picked from commit 675a5a6e7b)
Fixes a slowdown caused by erasing elements from the middle of a vector
during a hot loop in SHAPE_LINE_CHAIN::Simplify(). This gets called
quite a bit when loading boards and updating lines, so it needs to be as
fast as possible
Fixes https://gitlab.com/kicad/code/kicad/issues/12115
(cherry picked from commit c9c31fcbc2)
Placing via in walkaround mode and colliding with an arc triggered an
unneeded assertion.
Also fixes the bad assertion format that did not receive strings
(cherry picked from commit df9cf0a0c3)
In addition to showing resolved clearance, we also show the calculated
clearance in the same method as is used for DRC. This will allow users
to better examine their system while working.
Fixes https://gitlab.com/kicad/code/kicad/issues/7934
The fractional part of Altium schematic units is an integer number of
1/10000 mil segments, which is 2.54 nm. The internal unit of eeschema
is 10 nm, so each fractional unit in Altium is 0.254 base eeschema
units. To be consistent with
cf33cfcad1
we round to the nearest 10nm for each element
Fixes https://gitlab.com/kicad/code/kicad/issues/11742
We now test the midpoint (B) of the 3 consecutive polyline points (A, B, C), since (assuming the angle between AB and BC is > 90 degrees) AC is always longer than
AB or BC. This minimizes the distance computation rounding error (in the previous algorithm, taking the point C for colineraity test) if AB is short and BC is very long, the test would
often fail due to rouding error in projection/line distance computation
We can't know that all holes will be ccw when entering unfracture.
Instead, we set the largest polyline to be the outline and the others to
be the holes.
(cherry picked from commit 1fe956c069)
Mainly CacheTriangulation() was creating triangles using partition mode.
But this mode is optimized for Pcbnew and Gerbview and different internal units.
Now CacheTriangulation() is used in no partition, much faster in GERBVIEW_PAINTER.
Fixes#11549https://gitlab.com/kicad/code/kicad/issues/11549
This also fixes a failure to use the correct effective width for
shapes (which might, for instance, inherit their widths from schematic
defaults, netclasses, etc.).
Fixes https://gitlab.com/kicad/code/kicad/issues/11358
Inflate with linked holes needs to account for fractured polygons,
otherwise inflating with positive value will create rounded divots where
overlapping fracture lines meet and inflating with negative value will
create spaces between fracture lines.
Calling Simplify before Inflate takes an inordinate amount of time as
the Clipper healing routine is rather slow. Our own Unfracture is meant
to heal the results of our Fracture routine and works much more quickly.
After healing, we still call the Simplify routine
(cherry picked from commit 9ca35cbcee)
Clipper can handle complex input polygons but we will sometimes struggle
dealing with outputs from the inflate routine that have degenerate or
overlapping points. Calling Simplify after the inflate keeps our
polygons easier to handle
Fixes https://gitlab.com/kicad/code/kicad/issues/11036
(cherry picked from commit a24cdcb3f0)
Since we use center points to move back and forth for angle and
adjustments, we want to ensure that our center point is stable.
Rounding using integers introduces a 0.5 int uncertainty in each
measurement. These are combined together multiple times to calculate
the center point, which combines the uncertainty. Propagating the
uncertainty to the final calculation allows us to assign a range of true
values and pick the value that is most likely the correct value.
Fixes https://gitlab.com/kicad/code/kicad/issues/10739
1) Generate SHAPE_POLY_SET triangulation by outline so they can be
shared between connectivity system and other clients.
2) Don't add items to connectivity when reading board; we're going
to do a total rebuild anyway.
3) Use multithreading when caching triangulation.
Mac and some Linux configs disable menu icons. We shouldn't offer the
option when the system does not support this as it leads to confusion
Fixes https://gitlab.com/kicad/code/kicad/issues/10425
Handles checking output of the arc to ensure we don't end up generating
an invalid arc. Also keeps the limit of the arc angle to be (360,360)
excluding 0.
Fixes https://gitlab.com/kicad/code/kicad/issues/10070
(cherry picked from commit 8fc831cbc2)
Test should not be testing against the polygonization error; if done
correctly that should all be on the correct side of the shape. Use an
epsilon instead (I chose polygonization error / 10, but the value isn't
terribly important).
Fixes https://gitlab.com/kicad/code/kicad/issues/10724
The existing algorithm nicely handled the error being on the inside (where
the segment ends are error-free), but not when it was on the outside (where
the segment midpoints are error-free).
In any case, we want error-free points at each end of the arc so we don't
get ears or divots.
We do no track all the various possible issues arising from using
unbundled Mac apps. Users may choose to use KiCad this way but issues
must be recreated on a supported configuration
(Conversion was upside-down.)
Also fixes bugs with rotation angle increment not getting units
set and with a 0 footprint editor value overwriting a non-zero
pcb editor value (or vice versa).
Includes bug fix for catastrophic error in Add() for converting to
radians.
Includes bug fixes for the fact that the pcbnew test can't seem to
find the ANGLE_* objects (getting all 0's instead).
Seth Hillbrand
Marek Roszko
Ian McInerney
qu1ck
Tomasz Wlostowski
Nimish Telang
jean-pierre charras
Alex
Roberto Fernandez Bautista
Jeff Young
Ian McInerney
Jon Evans
Vincenzo Fortunato
Jonathan Haas
Marco Langer
Mike Williams
markus-bonk
Wayne Stambaugh
Ola Rinta-Koski