d44e0ab765
Limit use of non-copper layers
...
When importing, we should not use Eco1 for other purposes as the
importer uses it to place unknown layer objects. We also need to avoid
placing objects on the courtyard layers that do not relate to the layer
purpose in DRC
Fixes https://gitlab.com/kicad/code/kicad/issues/9442
2021-10-22 12:31:11 -07:00
57f907f6e7
Make sure PCB_PARSER is fully initialized between footprints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9424
2021-10-19 17:14:04 +01:00
10ac675905
Fix shadowing
2021-10-18 09:00:24 -07:00
99442350a4
CADSTAR PCB: Fix loading of arc tracks following recent PCB_ARC changes
...
We no longer have any knowledge of the original start/end of the arc,
since SetArcAngleAndEnd swaps the start and end to ensure the arc is
always clockwise at the end.
Adds a method EDA_SHAPE::EndsSwapped() to notify whether the start/end
point of the shape were swapped.
2021-10-17 17:57:51 +01:00
e867a4fd27
CADSTAR PCB: Fix Zone fill priorities
...
The algorithm now correctly determines fill priorities when the zone
outlines are close together and within the minimum clearance between
zones.
2021-10-16 21:50:56 +01:00
f9861b4a6c
Finish arc rework and push out to file formats.
2021-10-15 12:45:43 +01:00
9b9e379aa0
Overhaul arc internal model to not over-specify information.
2021-10-15 12:45:43 +01:00
8b08c9e53f
Shorter names before things get out of hand.
...
Also, remove comments indicating CURVE is a Bezier. Just call it a
BEZIER.
2021-10-15 12:45:43 +01:00
a41944020d
Push most of PCB_SHAPE impl down in to EDA_SHAPE.
2021-10-15 12:45:43 +01:00
43e59b0ea7
CADSTAR PCB: Correctly handle associated pad ids and PCB Only pads
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9372
2021-10-11 18:30:20 +01:00
7a71ebf9ac
CADSTAR PCB: Load all three net properties into a single Netclass
...
The final netclass name will be a bit long but it will allow for custom
DRC rules to individually target each of the three properties available
in CADSTAR:
- Route Code (which specifies width of the track in min, max, opt)
- Net class (only used in signal integrity analysis)
- Spacing class (for specifying clearance requirements between classes)
2021-10-10 22:16:08 +01:00
ac3ade874e
CADSTAR PCB: Set Copper-to-Hole clearance as 0
...
Testing suggests that CADSTAR doesn't actually have any clearance to the
hole (other than electrical clearance to the barrel of the padstack/
viastack).
This removes a large amount of DRC violations on imported designs.
2021-10-10 00:20:13 +01:00
eb7d0fdf8a
CADSTAR PCB: Use board clearance + additional isolation as zone clearance
...
Copper-to-copper clearance is too onerous and results in large amount
of DRC errors for the majority of imported designs.
2021-10-10 00:18:36 +01:00
f4ff01a5ab
CADSTAR PCB: Copy default netclass settings when creating new ones
...
Ensures that the global clearance is preserved in the newly created
netclass.
2021-10-09 23:10:55 +01:00
8f74085ca4
CADSTAR PCB: Handle older boards without construction layers
...
Use KiCad default stackup for older CADSTAR boards that do not
define any dielectric layers between the electrical layers.
Also fix default stackup calculation to ensure finished board thickness
is 1.6mm
2021-10-09 21:26:16 +01:00
33a3cfc87b
CADSTAR PCB: Update Board Design Settings to notify that a stackup exists
...
Also update thickness of the PCB
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9307
2021-10-09 20:33:14 +01:00
e80a1c2679
CADSTAR PCB: Don't load items on invalid layers
...
This was happening in two cases:
- Loading documentation symbols (CADSTAR on purpose defines these in an
invalid layer)
- When an item was in a "layer set" such as ALLELEC or ALLLAYER - need to
make sure we remove the copper layers that are not active in the design
2021-10-09 20:07:23 +01:00
677166f0b8
CADSTAR PCB: Rule Areas have zero width
...
Cadstar areas have a line width but this is only for display purposes.
Instead CADSTAR uses the center line when determining whether a DRC
violation occurred.
2021-10-08 21:27:32 +01:00
2dfbd42be6
CADSTAR PCB: Legacy netclass and design settings loading is required
2021-10-08 20:48:10 +01:00
ae0229b7c9
CADSTAR PCB: Add imported nets to the imported netclass.
2021-10-08 20:25:09 +01:00
58fc4f512d
CADSTAR PCB: Don't create zero width tracks
...
Fixes a bug in the route offsetting part of the import
that was resulting in zero-width tracks being imported.
2021-10-08 20:25:09 +01:00
16b61e47cd
CADSTAR PCB: Clear arcs from polys before boolean ops (e.g. zone fills)
2021-10-08 20:25:09 +01:00
fb588da875
CADSTAR PCB: Fix loading of thermal relief gap in zones
...
We were loading as solid fill when the relief gap was exactly the
same as the minimum width.
Also we can do better than just load as solid fill when it is smaller:
we can instead just use the minimum width and at least it still will
have thermal reliefs.
2021-10-08 17:39:08 +01:00
cb47bf25c0
CADSTAR PCB: Actually load the original route code as a KiCad NETCLASS
...
We weren't actually loading it into the design settings even though
everything else was already being correctly loaded.
2021-10-07 22:13:06 +01:00
9a8d1246cc
We don't keep a CHANGELOG.TXT
...
Direct interested readers to AUTHORS.TXT instead.
2021-10-05 19:46:53 -07:00
548e5f49bd
Clean up unused variable usage
...
Unused variables in function calls can be commented out. Unused
return variables get a new routine `ignore_unused()` that silences the
warnings with zero overhead.
2021-10-05 10:00:30 -07:00
f606679164
Proper numeric sorting for intersheet refs.
...
Also expunges the horrifically named std::remove and std::remove_if
(neither of which remove anything).
2021-10-01 18:29:21 +01:00
6b25099df7
Read/write lock status for fp text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9325
2021-09-25 20:37:56 +01:00
04aff93248
Eagle doesn't use netclass clearance so make them the board clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2442
2021-09-20 21:31:19 +01:00
f66654247a
Read netclasses when importing Eagle projects.
...
Also creates a DRU file with the various netclass-to-netclass
clearance rules from the Eagle clearance matrix.
Fixes https://gitlab.com/kicad/code/kicad/issues/1774
2021-09-20 12:38:56 +01:00
b84d1456d5
KIFACE_I -> KIFACE_BASE.
2021-09-14 23:45:14 +01:00
625e56676a
Add progress reporting to CADSTAR Schematic & PCB importers
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8685
2021-09-11 17:50:19 +01:00
d2bff137ee
.kicad_pcb file: fix incorrect keyword stored for some (not all) PAD properties.
...
( a copy-paste error? )
Fixes #9102
https://gitlab.com/kicad/code/kicad/issues/9102
2021-09-06 09:15:18 +02:00
ee5f9034f7
pcb parser: ensure the parser is reinitialized before parsing a new fp file
...
Because the same parser is used to read all footprint files of a library,
the parser must be reinitialized (internal variable cleared) before reading
a new file, otherwise the previous parser state is applied to the next file.
Fixes #7627
https://gitlab.com/kicad/code/kicad/issues/7627
2021-08-26 19:38:20 +02:00
2b3477ca28
Handle RGBA conversion to hexadecimal format for wxWidgets 3.0
2021-08-25 02:40:17 +01:00
a02ea1609b
A more robust solution to the 3D color opacity issue.
...
(This also fixes a typo in the previous fix that assigned the opacities
backwards.)
2021-08-24 11:24:25 +01:00
e6ca9837a2
Clear numbers from non-numberable pads and don't run DRC on them.
...
This was also the last straw on the misnamed PAD::GetName() and
PAD::SetName(), which are now PAD::GetNumber() and PAD::SetNumber().
Fixes https://gitlab.com/kicad/code/kicad/issues/9017
2021-08-24 01:03:06 +01:00
21f2b235ce
Rework stackup colors a bit to support opacity for 3D viewer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9012
2021-08-23 20:00:17 +01:00
fec34e8dd8
Get rid of an extraneous layer parameter.
...
Also adds a bit of nullptr safety.
2021-08-23 20:00:17 +01:00
41619ebbe2
Decouple PROGRESS_REPORTER interface from implementations.
2021-08-14 21:05:49 +01:00
54942a1401
Fix typos that would result in fp zone setting written into pads.
2021-08-08 18:12:29 +01:00
46bdce2747
Don't allow pads in groups in the board editor.
...
Bad stuff happens, including crashes.
2021-08-04 13:55:42 +01:00
0f5a8f87d3
Add writing of pad primitive polys with arcs, and fix a bug in reading.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8827
2021-08-01 10:47:00 +01:00
6aaf4413b3
Fix kicad_string.h / string.cpp mismatch.
...
They don't define a KiCad string class, so the header file name was
somewhat misleading. But the fact that they didn't match definitely
made coding more difficult.
2021-07-29 16:03:25 +01:00
f221220fe2
Rename layer ids file.
...
It hasn't had anything to do with colors or visibility for some time
now.
2021-07-29 16:03:25 +01:00
46338403e7
Unwrap some std::library typedefs.
2021-07-28 22:16:38 +01:00
369d813a32
Pass std::string by reference instead of on the stack where applicable.
2021-07-27 13:30:05 -04:00
37b200cb3e
Pass wxString objects by reference instead of on the stack.
2021-07-27 08:41:27 -04:00
8fd83cbb95
Pass wxPoint objects by reference instead of on the stack.
2021-07-26 15:35:33 -04:00
373f0335c8
Convert Altium radial dimensions to leaders.
...
This is because we don't yet support radial dimensions.
Also fixes a bug where we fail to read an Altium circular track. We
now convert it to a pair of 180-degree arcs.
Also fixes a bug where we were failing to import prefixes on linear
dimensions.
Fixes https://gitlab.com/kicad/code/kicad/issues/8789
2021-07-24 14:25:59 +01:00
531f5480a7
Reduce line-breaks and increase SNR.
2021-07-24 14:25:59 +01:00
04b9b15255
Fix copy/paste error.
2021-07-23 01:11:22 +01:00
a16b85db67
Read/write group locked state. Show locked state in dialog & statusbar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8796
2021-07-22 12:49:30 +01:00
0fb864d596
Pull some name changes back from 7.0 to ease merging.
2021-07-21 20:58:59 +01:00
af90d47edc
Altium: Fix calculating third arc point from uninitialized memory
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8671
2021-07-20 19:13:32 +00:00
cf00319c85
More NULL expunging.
2021-07-20 07:27:18 -04:00
e61822c9e0
Naming conventions and a bug fix on arc points.
2021-07-19 13:17:12 +01:00
56412cc843
PCB_TEXT: remove "hide" option, because they are never hidden.
...
- avoid write "hide" option in file
- always return true when calling IsVisible()
Fixes #8806
https://gitlab.com/kicad/code/kicad/issues/8806
2021-07-18 14:58:21 +02:00
01d3a88faa
Allow unnamed embedded step files in altium boards.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7898
2021-07-10 16:37:45 +01:00
17ab2c7197
.kicad_pcb files: minor enhancements: add missing new lines in file.
...
No actual change, this is only a cosmetic change.
2021-07-07 11:44:11 +02:00
576d70fab0
Fix file format syntax of arcs in polygons
...
No format bump as there is no way to create these files yet.
2021-07-04 12:10:59 -04:00
0116e9c94e
Silence Altium polygon-needs-at-least-3-verticies warning.
...
Too many Altium files appear to have these. Just ignore them instead.
Fixes https://gitlab.com/kicad/code/kicad/issues/8183
2021-07-04 11:02:59 +01:00
ab38dfd7ae
Fix build
2021-07-03 19:47:58 -04:00
77b68a827c
Remove unused variable
2021-07-03 19:20:54 -04:00
4f4deece6d
ADDED support for reading/writing arcs in polys
...
This adds support for reading and writing arc elements in polygons.
2021-07-03 19:37:50 +00:00
bc65b7173f
Don't use SCH version number when inspecting PCB files.
2021-07-03 15:24:54 +01:00
eff75b630f
Get rid of anonymous struct typedefs
...
We are using C++14 where there is no reason for this and is banned in C++20 under P1766R1. MSVC generates a warning under C++14 as a reminder.
2021-07-01 18:28:41 -04:00
6810912f09
Refuse to load schematics from the future.
...
Also fixes a bug where an empty window would get left when loading
a file from the KiCad manager window errored out.
Also fixes a bug where we were getting the wrong exception because
we were rethrowing the type-casted one (rather than just calling
throw).
Fixes https://gitlab.com/kicad/code/kicad/issues/8604
2021-06-30 18:32:07 +01:00
5cac8afe1d
Remove long-dead revision support for LIB_IDs.
2021-06-30 13:12:57 +01:00
a1dfc36233
More error message regularization.
2021-06-29 01:08:26 +01:00
062c4fda62
More error message regularization (and translatability improvements).
2021-06-28 00:45:24 +01:00
4aa8318dc2
More error message regularization.
2021-06-27 14:24:02 +01:00
0dfb5fcaf9
Error message cleanup.
...
wxString::Format is redundant in a wxLogXXX call.
Error messages should generally be translatable.
Error messages should use generally consistent sentence forms.
2021-06-26 22:53:24 +01:00
5c21f93803
Consistency in progress and error messages.
2021-06-26 13:23:43 +01:00
e50eaed7b9
altium: Improve parsing of UTF-8 data
...
This is an implementation based on d4ccec05 from @fxtentacle
2021-06-26 13:58:56 +02:00
e6c047896c
altium: introduce progress reporting, fix possible nullptr when reading 3D models
2021-06-26 12:54:31 +02:00
81fc710a5d
Use consistent terminology.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8681
2021-06-26 10:11:41 +01:00
8502fd6877
Divide-by-zero safety.
2021-06-24 12:18:22 +01:00
a8028e3bd1
Fix uninitialized variables.
2021-06-24 12:18:22 +01:00
b532ecec52
Fix ALTIUM_RULE_TOKEN qa test failure
2021-06-24 05:58:24 +00:00
50eea4f487
Import progress dialog for FabMaster.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5315
2021-06-24 00:21:37 +01:00
5fa5a73c6d
File open/import progress dialogs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6864
Fixes https://gitlab.com/kicad/code/kicad/issues/2166
2021-06-23 23:55:54 +01:00
1a35d8ba5d
Setup layer mapping when importing Eagle library.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7891
2021-06-15 19:20:17 +01:00
4418707e5e
Add a few more overbar syntax conversion calls.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8606
2021-06-15 13:09:18 +01:00
096e342386
Prefix TRACK, ARC and VIA.
2021-06-11 22:07:02 +01:00
ade38f48bc
Add conversion from old `~...~` to new `~{...}` notation
2021-06-11 18:40:57 +00:00
16b0147af8
Prefix DIMENSION types.
2021-06-11 17:59:44 +01:00
5f1e9bc8a7
Fix typos in source code
2021-06-10 01:24:15 +00:00
f968fc8719
Fix source comment / documentation typos
2021-06-09 19:32:58 +00:00
6e01ce84b9
Break out eda_item_flags.h, fix the typedef to std::uint32_t, fix some signed vars
2021-06-08 19:12:30 -04:00
2aaec31832
Don't put up "old version" warning for gerbview-generated PCBs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8574
2021-06-08 22:12:44 +01:00
9268340dcc
Kick wx.h out of pcbnew
2021-06-07 18:38:51 -04:00
022dd6072c
Add utility method to resolve symlinks
...
The same logic block to resolve possible symlinks exists in 5 different
places now. This change moves this duplicated code to a static member
function of WX_FILENAME instead.
2021-06-07 20:59:59 +00:00
83080b67f5
Fix build on wx 3.0
2021-06-06 20:21:21 -04:00
5bb6f8c5e3
hashtables.h doesn't need eda_item.h
2021-06-06 19:11:35 -04:00
10e60acf34
Clean up including of board_design_settings.h
2021-06-06 15:03:42 -04:00
581ba21865
Remove wx includes out of cadstar_archive_loader.h
2021-06-06 09:28:02 -04:00
06e967354f
Fix symlink read-/write-through code
...
Use `realpath(3)` instead of `readlink(3)`, which offers support for
relative and absolute symlinks alike, since all symbolic links will be
resolved to the absolute path of the linked-to file.
Fixes #8082
2021-06-05 14:22:50 +00:00
0c879eead3
Cleanup headers in pcbnew pcad importer
2021-06-04 01:28:40 +01:00
4f05262705
Cleanup includes in board.h and footprint.h
2021-06-03 20:19:52 +01:00
Seth Hillbrand
Jeff Young
Roberto Fernandez Bautista
jean-pierre charras
Wayne Stambaugh
david-beinder
Jon Evans
Marek Roszko
Thomas Pointhuber
Mikolaj Wielgus
luz paz
Johannes Maibaum
Ian McInerney