6c224156f5
Adding conversion from points to arcs
...
Allows detection of arcs from segments in a SHAPE_LINE_CHAIN, converting
them to SHAPE_ARCs in the chain
2021-07-03 19:37:50 +00:00
5b2be906b8
Removing CLIPPER poly support
2021-07-03 19:37:50 +00:00
4f4deece6d
ADDED support for reading/writing arcs in polys
...
This adds support for reading and writing arc elements in polygons.
2021-07-03 19:37:50 +00:00
eff75b630f
Get rid of anonymous struct typedefs
...
We are using C++14 where there is no reason for this and is banned in C++20 under P1766R1. MSVC generates a warning under C++14 as a reminder.
2021-07-01 18:28:41 -04:00
507a88524a
KiCad internal library header file housekeeping.
2021-07-01 13:46:38 -04:00
175b474c3e
Coverity issue fixes.
...
Fixes issues #280412 , #314755 , #329615 , #332459 , #332157 , #332167 ,
2021-06-30 18:08:49 -04:00
17737af130
Fix some issues related to SHAPE_ARC:
...
- Some are related to shape errors when the allowed error to approximate circle
by segment is large and arc radius small.
- fix the actual error used in ConvertToPolyline().
- Use SHAPE_ARC::DefaultAccuracyForPCB() instead of a fixed value as extra margin
in zones. It should not change something, because it is also a fixed value
(5 micrometers), but it is not a magic number.
-TransformArcToPolygon() fix some issues and add a new algo, based on the arc actual
outline shape (initial algo is still available in code, just in case).
2021-06-30 13:33:49 +02:00
bcb5618315
Fix incorrect calculation in TransformCircleToPolygon(), only noticeable
...
when the allowed aError is (unusually) large.
2021-06-28 18:51:37 +02:00
fa49b54f93
Fix minor issue in TransformCircleToPolygon() when aError is set to a large value.
...
pcb_painter.cpp: add (but not activate) compil option to show the conversion
of SHAPE_ARC::ConvertToPolyline as segments, for debug purposes.
2021-06-28 15:50:16 +02:00
9a865b1989
Fix a typo and a minor compil warning
2021-06-28 14:37:35 +02:00
310adedf85
Add GetCircleToSegmentError() to geometry/geometry_utils.
...
This function returns the error created by a circle to segment approximation.
2021-06-26 18:57:07 +02:00
3c81403424
Refinements in Arc to Polygon transform: slightly better shapes of arc ends.
...
Note also the transform is still not good: the same parameters are applied
to convert inner arc, outer arc and middle arc of a thick arc to segments.
But these parameters depend on arc radius (or circle radius) value.
2021-06-26 14:20:55 +02:00
31d7a0a8d1
TransformArcToPolygon(): slightly better approximation of arc.
...
The error between the "right" shape and the polygon is slightly smaller.
The approximations of the inner arc and the outer arc are better, but not perfect.
Also add (for test and debug purpose only) the code to show the polygon when
drawing a PCB_ARC (currently disabled)
2021-06-25 18:46:16 +02:00
1d6ad4a52a
SHAPE_ARC::ConvertToPolyline(): fix ugly approximation for some arcs.
...
Arcs with small radius can be approximated with very few segments.
However, if the thickness is large, relative to the radius, the approximation
must be based on the external radius, not the arc radius.
The difference can be significant.
This is especially noticeable for these graphic arcs in filled zones.
2021-06-23 18:30:02 +02:00
0ff1f6f69c
Try to fix a include order (Windows only, to fix aCI/CD error)
2021-06-16 20:04:32 +02:00
aeb479b46f
Fix an issue with pythons scripts running outside Kicad (Windows specific).
...
When running a python script is run from a console, outside Kicad, a wxWidgets
alert was always show (even in release mode)
This is due to calling wxStandardPaths::Get() with no wxApp open( i.e. wxTheApp == O)
The fix uses a dummy wxApp in this case.
2021-06-16 10:18:39 +02:00
a04d6401c1
Transform arcs more accurately
...
Segment approximation for arcs leaves small "indents" where the rounded
edges of two segments don't quite meet.
This gives closer approximation by calculating the inner and outer joint
points based on the radius, eliminating the indents.
2021-06-11 14:26:38 -07:00
f968fc8719
Fix source comment / documentation typos
2021-06-09 19:32:58 +00:00
053bd66650
Fix localization of OS unsupported message, disallow bug reports from W7
2021-06-09 19:01:54 +00:00
ffa87e69c6
Remove/replace some stdint.h includes
2021-06-08 21:17:57 -04:00
69d7a23e1c
Start cleaning out wx/wx.h in cpp files
2021-06-07 18:20:47 -04:00
f923649801
If NSError contains recovery suggestion string, append it to error message as it was until now. However, if recovery string is NIL, do not append it at all.
...
This MR fixes the "error message\n\n(null)".
2021-06-06 14:24:08 +00:00
53a75a4961
Fix actual-clearance handling in arc collision routines.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8407
2021-06-03 18:33:59 +01:00
976e756b02
Formatting.
2021-06-03 18:33:59 +01:00
059f79dfdb
Re-remove KiROUND from header
...
Moves routines requiring KiROUND (and util.h by extension) to the cpp
file
2021-06-03 08:44:17 -07:00
29783f125b
Eliminate one wxRect constructor in BOX2
...
The only usage auto converted to BOX2D anyway...
2021-06-03 01:27:15 -04:00
cf1c75ecd4
Handle rounding errors in seg length calculation
...
SQRT needs to be passed through KiROUND before returning otherwise,
truncation errrors will accumulate between routing and DRC
Fixes https://gitlab.com/kicad/code/kicad/issues/8541
2021-06-02 16:42:35 -07:00
c294d28275
Split POLY_GRID_PARTITION to a cpp file
...
Not entirely a lightweight class
2021-06-02 18:31:30 -04:00
13abb9f947
Shift some seg functions to the cpp file
2021-06-02 18:31:30 -04:00
b6de4da686
Fix compatibility with wxWidgets 3.0.x
...
Fixes #8533
https://gitlab.com/kicad/code/kicad/issues/8533
2021-06-02 10:02:20 +02:00
0b4a680dbb
Hotglue wxLogDebug into math/util.h without the global include
2021-06-02 00:26:16 -04:00
cf2bb5692a
Remove the wxLog calls from math/util.h for now
...
This was leaking windows headers and partial wx headers to 1084 compilation units......
This also means math/util.h is leaking to 1084 compilation units which seems a bit high too.
2021-06-01 18:44:22 -04:00
46d746c9da
Performance optimizations.
2021-06-01 23:11:54 +01:00
2d8264124d
geometry: SHAPE_LINE_CHAIN::PathLength() now can accept the maximum index of the segment to calculate the length to
2021-05-29 00:13:24 +02:00
7553b7b092
geometry: add minimum distance threshold parameter to SHAPE_LINE_CHAIN::Find()/FindSegment()
2021-05-29 00:13:24 +02:00
b3fb7190df
geometry: SEG::Contains() should use Distance(), not SquaredDistance() for correct rounding
2021-05-29 00:13:24 +02:00
e7fe8c4ddb
geometry: rework SHAPE_LINE_CHAIN::Intersect() to explicitly indicate touching vertices and remove references to SEGs from INTERSECTION structure
2021-05-29 00:13:24 +02:00
f30ebbde33
Fix accuracy of tuning path calculation when measuring arcs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8401
2021-05-10 21:22:51 -04:00
30c92fc5d1
Disable OSX automatic window tabbing
2021-05-09 12:59:57 +01:00
dc70df6036
kiplatform: check for null window handle in IsWindowActive().
2021-04-27 14:13:16 +02:00
715c61ac9f
PNS: Fix yet more arc edge cases
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8150
2021-04-12 19:59:55 -04:00
1c431d9929
PNS: Fix some off-by-one errors with arc dragging
2021-04-11 22:12:53 -04:00
f5ef60c2f2
PNS: Fix shoving segment after arc
2021-04-11 18:06:21 -04:00
a26fc6d65d
PNS: Fix several issues with arc dragging
...
Do not merge vertices that belong to different arcs
Fix start segment identification after arcs
Fix free-angle drag after arc
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8173
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8150
2021-04-11 17:56:40 -04:00
258fd07939
Fix a compil issue (at least on msys2)
2021-04-11 17:32:40 +02:00
7ba110bd77
PNS: Fix dragging of segments with arcs in line
2021-04-11 10:18:57 -04:00
a30894e5a1
Allow SHAPE_LINE_CHAIN and SHAPE_ARC to be mirrored using a SEG
2021-04-11 13:27:25 +00:00
e04c820442
Formatting.
2021-04-09 14:02:13 +01:00
b7bd7246af
SHAPE_LINE_CHAIN::Split: Add integers before incrementing the iterator
...
Partially Fixes https://gitlab.com/kicad/code/kicad/-/issues/8131
2021-04-07 11:28:02 +00:00
235688e459
Less restrictive Arc Track Dragging tool
...
Use the connecting straight tracks even if not exactly parallel - allow
an error margin configurable in ADVANCED_CFG (default 1 degree). Also
be less strict about end point matching and use the width of the track
as the criteria to determine suitability.
Finally, delete any short lengths of track at the end of the operation
and amend the arc end points to keep connectivity.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7967
2021-04-06 12:52:01 +00:00
1632707d9b
Replace tabs with spaces
2021-04-05 01:13:39 +00:00
2c05d99d9f
SHAPE_POLY_SET: Fix segment collision testing
...
It appears as though there was an optimization to skip testing segments if
one of their endpoints (and only the A point) was inside. Unclear the reason
for this, but I'm going to assume that it was intended to optimize the case
where both points are inside (like the point case above it).
2021-04-04 20:12:45 -04:00
5bc1e55272
SHAPE_LINE_CHAIN: Don't crash if inserting point at the end
2021-04-04 19:38:54 -04:00
bd6539885b
Fix SHAPE_POLY_SET::SquaredDistanceToPolygon ignoring aNearest if unlucky
2021-04-04 19:38:54 -04:00
3c1a8f8c88
Fix MSW build, take 2
2021-04-02 20:16:25 -04:00
80eee2decb
Fix MSW build
2021-04-02 20:13:10 -04:00
8ea18c0639
Don't steal focus from other windows on GTK
...
Before, it was possible for the canvas to steal the
focus if the cursor was only moved over it and not
clicked. Now, the canvas will only take the focus if
the frame is active.
Fixes https://gitlab.com/kicad/code/kicad/issues/7233
2021-04-03 00:17:28 +01:00
b6f2941a06
Another try a allowing touching courtyards.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8076
2021-03-31 22:54:30 +01:00
41f88dbabc
Refactor platform-specific init into two phases
...
The first phase is for the environment before the OS
apps are created, and the second phase is for after
the OS app is created but before all of our processing.
Fixes https://gitlab.com/kicad/code/kicad/issues/7992
2021-03-23 19:11:08 +00:00
cdb352bb24
Allow finding kicad_3dsg when running from build dir
...
This might also come in handy later when we use more dynamic libs
2021-03-21 09:16:47 -04:00
f1c599fa4d
Tweak PCB selection behavior to reduce unintuitive behavior
...
We were discarding shapes too aggressively for having a
larger area than a shape underneath.
Let's also try showing fewer disambiguation menus, in particular
always preferring items on the active layer when the candidates
include overlapping items of similar area on other layers.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7949
2021-03-20 13:11:51 -04:00
e4b99b9bb5
Fix SHAPE_ARC::Collide and add Unit Tests
2021-03-20 16:11:43 +00:00
917e368db3
Add missing header that broke msvc builds
2021-03-20 10:28:35 -04:00
61c9645220
Fix Windows build
2021-03-19 18:36:16 -04:00
008f0d55c3
Add an interceptor for GTK error messages to hide them
...
wxWidgets seems to cause GTK to spam messages to the terminal,
and we have no control over that. So lets hide the messages
so no one complains about them. If people really want to see
them, they can add the KICAD_SHOW_GTK_MESSAGES build flag to CMake
and they can watch them scroll past.
2021-03-19 22:05:00 +00:00
3036683a2c
Move platform-specific init tasks into KIPLATFORM
2021-03-19 21:26:07 +00:00
48bd564639
Add Dark mode detection to MacOS
2021-03-16 21:58:42 +00:00
a9f86c6f3d
Enable icon themes for Windows
...
Windows 10 "dark mode" is not supported and likely won't be,
but high-contrast mode and manual color theme editing is still
possible.
2021-03-14 15:39:47 -04:00
e2aa7be4b3
Added a lot of consts and refactored a few lines
2021-03-08 12:49:48 -08:00
0f22b54cd8
Clip the leader lines properly when using circular text frame
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7810
2021-03-07 21:19:19 +00:00
87ea540953
Fix whitespace errors
2021-02-25 17:18:23 +01:00
f7f5e67f56
geometry: SHAPE_LINE_CHAIN::Simplify() now correctly simplifies last 3 colinear vertices
2021-02-25 17:18:23 +01:00
baacb9c85a
geometry: fix MTV calculation for simple polygons
2021-02-25 17:18:23 +01:00
507ca9bc73
Add DPI scaling to KIPLATFORM
...
GTK needs to check current scaling but wx doesn't provide this
functionality in 3.0, so we can bypass by going straight to the source.
2021-02-22 17:38:27 -08:00
e89f9db438
Footprint disallow layer checking needs to be based on courtyards.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7620
2021-02-20 14:13:36 +00:00
079203c345
Change Linux documents path to XDG_DATA_HOME
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7543
2021-02-17 20:25:50 -05:00
2d66abdc89
CADSTAR PCB Archive Importer: More improvements to loading of zones
...
Adds a new function Area() to SHAPE_POLY_SET
2021-02-10 18:49:21 +00:00
1ba7bebce6
Handle lack of a Documents directory
2021-02-09 20:15:30 -05:00
872184fe8b
Revert "Bump minimum required CMake version to 3.10"
...
This reverts commit a475f45753
2021-02-09 18:46:13 -05:00
9728ceab0d
Fall back to explicit documents path if XDG special dirs are missing
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7452
2021-02-08 20:21:39 -05:00
a475f45753
Bump minimum required CMake version to 3.10
...
This allows us to remove even more workarounds
2021-02-08 12:23:08 +00:00
90b3d0c96d
Implement TransformShapeWithClearanceToPolygon for DIMENSIONs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6890
2021-02-03 23:34:17 +00:00
06a515339c
Correct pointless and bad buffer sizing in RegisterApplicationRestart
2021-02-01 15:36:07 -05:00
73886aecb1
Ensure partially triangulated polys are not valid
...
Moves rule area triangulation outside of layer iterator and keeps the
triangulation_valid flag false until the triangulation has been
completed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7032
2021-01-29 16:33:57 -08:00
a47e8af0d0
Fix up naming of the kiplatform helpers
2021-01-27 19:12:20 -05:00
299830350c
Fix macos build error
2021-01-27 19:12:19 -05:00
34bcf1883d
Blindly implement the macos fetch of cache dir
2021-01-27 19:12:19 -05:00
daf9c4f319
Centralize the 3d cache path
2021-01-27 19:12:19 -05:00
8622565480
Add GetUserConfigDir
2021-01-27 19:12:18 -05:00
2bbc25a630
Use g_get_user_special_dir for documents dir on gtk
2021-01-27 19:12:18 -05:00
28c6967dbc
Start trying to shuffle around path management
2021-01-27 19:12:18 -05:00
6ab1144ea3
Fix broken Doxygen comment specifiers.
...
Please note, ///> is not a valid Doxygen comment specifier. ///< is the
correct specifier to use for single line or short Doxygen comments.
2021-01-25 07:42:36 -05:00
99d203feae
Clarify CIRCLE::ConstructFromTanTanPt
...
Remove unused bool aAlternateSolution and add doxygen comments
2021-01-24 16:41:11 +00:00
48823c0723
Formatting fixes and fix qa_kimath following rebase
2021-01-24 16:41:10 +00:00
19620cebe7
qa tests: fix test_circle
2021-01-24 16:41:10 +00:00
6ed5ed52b8
qa tests for CIRCLE geometry library
2021-01-24 16:41:10 +00:00
b6a50d2f74
qa tests for SEG perpendicularity and parallelism
2021-01-24 16:41:10 +00:00
6e7ae93cc8
EDIT_TOOL::DragArcTrack Fix incorrect undo history when items are deleted
...
Need to make sure we only apply one COMMIT operation per object before calling COMMIT::Push() or COMMIT::Revert()
2021-01-24 16:41:10 +00:00
2b5c1bae97
CHANGED: Dragging a curved track starts an interactive resizing of it, keeping start an end points tangent
2021-01-24 16:41:10 +00:00
b8dfcb34c4
Revert "Use less-sophisticated arc editing math."
...
This reverts commit 3b424d3868
2021-01-18 12:44:27 -08:00
00a9910149
Fix misplaced parenthesis in VECTOR2<T>::Resize()
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7045
2021-01-16 09:41:14 +00:00
dc02ec9758
Remove a few const_cast
2021-01-12 20:51:31 +00:00
ac94d72d2d
Add more const specifiers
2021-01-12 20:51:31 +00:00
7994c59169
libs/kimath: POLY_GRID_PARTITION must use truncating (round-to-zero) rescale function for correct grid generation.
2021-01-10 00:04:57 +01:00
b2cfd7f479
Fix rounding issues
...
Rescaling and rotating has been leaving 1nm errors due to integer
truncation in VECTOR2I. This rounds integers using KiROUND before
returning
2021-01-09 13:05:58 -08:00
31dd04fa96
Fix ToVector to return world coordinates
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7002
2021-01-08 13:52:39 -05:00
c3eb8dccda
Fix typo in DIRECTION_45 ctor
2021-01-07 19:13:05 -05:00
a342bb9ab3
Standardize rounding in 64-bit rescale
...
32-bit rescale still uses truncation until we can determine how this
affects poly_grid_partition
2021-01-07 11:21:05 -08:00
77acf85310
Revert "Standardize rescale"
...
poly_grid_partition appears to depend on integer calculation for large
scaling
This reverts commit eef16fe717
2021-01-07 10:36:06 -08:00
6ca9a42251
Removes 3 other instances of a potential encoding problem
...
Signed-off-by: hoijui <hoijui.quaero@gmail.com>
2021-01-07 17:36:49 +00:00
e34b829242
Prevent an encoding error when generating python API DoxyGen
...
Signed-off-by: hoijui <hoijui.quaero@gmail.com>
2021-01-07 17:36:49 +00:00
0234b7278a
PNS: Make DIRECTION_45 North be up everywhere
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
2021-01-06 21:47:06 -05:00
eef16fe717
Standardize rescale
...
Rescale was returning differing results based on 32-bit vs 64-bit
implementations. Speed difference here appears to be positive.
2021-01-06 17:52:14 -08:00
2a088e5c7b
Add conversion of circles to zones and enable in footprint editor.
...
Also rule areas, of course.
Fixes https://gitlab.com/kicad/code/kicad/issues/6966
2021-01-06 17:21:49 +00:00
7431d5c985
PNS: First pass at updating meander placers for arcs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6464
2021-01-05 17:57:21 -05:00
8619086cf2
PNS: re-enable optimization of colinear segs in lines with arcs
2021-01-05 17:57:21 -05:00
8901e71fc8
PNS: Fix loop removal, make walkaround less broken for arcs
2021-01-05 17:57:21 -05:00
aebb571dc9
Short-circuit arc generation if we are on a diagonal
2021-01-05 17:57:21 -05:00
5a97764319
Make segment contain its edge
...
This allows segment snapping along its diagonals to the grid.
Fixes https://gitlab.com/kicad/code/kicad/issues/6924
2021-01-03 12:47:33 -08:00
eaffacbc85
PNS: construct initial lines with arcs more precisely
2021-01-02 23:57:09 -05:00
af4c6393bb
Fix arc collisions to account for width
...
This was causing arcs to be really hard to start routing from
2021-01-02 22:01:05 -05:00
73248ab219
PNS: correct initial segment direction for posture solver
2020-12-31 13:05:43 -05:00
111c644a82
Don't append zero-length arcs
2020-12-31 13:05:43 -05:00
fbdf31d35a
Prevent creating arcs with slightly offset endpoints
2020-12-31 13:05:43 -05:00
23c9eddf2d
Cleanup
2020-12-30 18:29:41 -05:00
79502a0d88
PNS: A new approach to arc placement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6334
2020-12-30 18:23:24 -05:00
af2219ba7f
Finish implementation of hole clearance checking.
...
It appears we never did via hole testing, and pad hole testing didn't
appear to get much testing.
2020-12-25 22:32:19 +00:00
ea351fde69
Recache polygon triangulation when mirroring
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6265
2020-12-20 10:45:24 -05:00
33dbc8ccd1
Add IsNetworkPath to kiplatform
2020-12-15 19:28:58 -05:00
d67cf2f9af
Replace wxFile usage with wxFFile
...
Buffered libc wxFFile is better thinking about syscall wxFile going wrong.
2020-12-12 13:16:23 -05:00
bc484784fc
Make sure zones are triangulated for DRC.
...
Normally this happens as a side-effect of rendering them but if done
from a script (or test case) this won't happen.
Fixes https://gitlab.com/kicad/code/kicad/issues/6635
2020-12-12 15:27:46 +00:00
f08b7f098f
Cleanup.
2020-12-12 15:27:46 +00:00
807eef1208
Better error reporting to try and catch 6635.
2020-12-12 12:22:52 +00:00
2c2630ef9e
Formatting.
2020-12-12 03:43:41 +00:00
be4b6ec06a
Cleanup compiler warnings
2020-12-09 23:13:33 +00:00
37178e3751
Formatting.
2020-11-29 14:02:46 +00:00
68625494f3
specctra_export: fix an issue with custom and chamfered/round rect pads.
...
Is some cases a created pad stack name had the same name as an other pad stack
having a slightly different shape, thus creating pads with a incorrect shape on board.
Fixes #6495
https://gitlab.com/kicad/code/kicad/issues/6495
2020-11-25 13:57:46 +01:00
9c7c05c161
Mostly formatting cleanup but a few type-casting cleanups too.
2020-11-24 22:16:41 +00:00
45598f2933
Add handling of DXF arbitrary axis/extrusions
...
This fixes some DXFs imports where unforunately CAD tools like SolidWorks
randomly decide to mirror circle definitions across the "z" axis (resulting in x or y axis flips in 2d)
Most likely live projection from 3D to 2D drawings introduces this.
However this is DXF specification to describe it so obtusely with vectors for a 2d drawing.
2020-11-23 21:24:38 -05:00
0e44f5128c
Add const specifiers
2020-11-18 19:50:36 +00:00
a3a409b438
Fix crash bug when deleting files with spaces in names.
2020-11-14 14:15:02 +00:00
7265f84358
fix PAD::TransformShapeWithClearanceToPolygon() incorrect calculation in some cases.
...
For round rect pads, when the arc error was OUTSIDE, the shape was too big and creates
bad shape for chamfered round rect pads.
For chamfered pads, when the clearance value was not 0, the chamfer was not at the
right place.
2020-11-14 08:50:58 +01:00
63773809d0
Formatting.
2020-11-10 18:08:25 +00:00
791a50b493
Remove work-around in favour of real fix in Clipper.
2020-11-04 11:21:45 +00:00
55c25f3cc4
Work around a round-off bug in Clipper.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6260
2020-11-02 17:43:13 +00:00
6bf29deb7f
Improve formatting.
2020-10-31 17:25:08 +00:00
a7d5d1f091
Add more consts all over the place
2020-10-27 11:03:35 +00:00
d1c73cb1d5
Clean up MODULE effective shape memory handling.
2020-10-25 23:38:21 +00:00
31cc100669
Don't make clients deal with nested SHAPE_COMPOUNDs.
2020-10-25 18:17:58 +00:00
d6f91c810f
Fix a few compil and Coverity warnings.
2020-10-25 10:02:07 +01:00
59f3fefd17
When polygonizing arcs don't use synthesized center and angle.
...
Start, mid and end are the "real" properties and come with less
error.
Also collapses two arc polygonization routines into one.
Also fixes DRC checks to be cognizant of arc approximation error.
Fixes https://gitlab.com/kicad/code/kicad/issues/6039
2020-10-23 23:55:45 +01:00
1cb7fbaab1
Fix errors in arc polygonization and test case.
...
1) Tests can't expect accuracies around 1 to work. PCBNew defaults
to 5000.
2) Tests shouldn't artifically expand tolerance just to match the
results.
3) Tests should guarantee that end point is on arc, not just close
to it.
4) Standard polygonization of a circle is inside so splitting the
error needs to increase radius, not decrease.
5) Special-case first and last points so that they're exact.
2020-10-23 23:55:45 +01:00
19bf594aa0
Remove unused point in polygon test
...
There can be only one.
2020-10-23 12:13:09 -07:00
58c006bc45
Register properties for ARC elements so we can get their netclass.
...
Also improves GAL arc drawing and polygonization.
Fixes https://gitlab.com/kicad/code/kicad/issues/6039
2020-10-23 14:27:36 +01:00
5b4f463c38
kimath: SHAPE_POLY_SET::Format() outputs C++-like code now, like other shapes
2020-10-23 01:18:01 +02:00
a8074ed37d
kimath: POLY_GRID_PARTITION now uses safer degeneracy (overlapping edges/'slits') handling mechanism. Also added some explanation of the algorithm used.
2020-10-23 01:17:54 +02:00
8185a416b9
Fix broken build on Linux with gcc.
2020-10-22 08:36:28 -04:00
9ff49277e1
Add implicit rule generation for keepout areas.
...
Also implements collision detection for SHAPE_POLY_SET.
Fixes https://gitlab.com/kicad/code/kicad/issues/6105
2020-10-22 10:41:21 +01:00
bfd04926b5
Performance improvement for polyset fracture.
2020-10-20 22:26:47 +01:00
006c462d8f
ADDED: Fillet Tracks tool in pcbnew
...
Select two or more track segments and run the "Fillet Tracks" tool.
2020-10-20 21:23:05 +00:00
06f01d0d8a
Add platform-specific code to allow wxChoice to ellipsize
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5377
2020-10-17 23:20:13 +01:00
bbe7573d1c
Performance enhancements to roundrect pads and clearance outlines.
...
Aka: avoid Clipper at all costs.
Fixes https://gitlab.com/kicad/code/kicad/issues/5900
2020-10-14 15:56:43 +01:00
54dc91a623
Account for segment width in aActual calculation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5990
2020-10-14 15:56:32 +01:00
1703729269
Require explicit decl of maxError and errorLocations.
...
This should reduce both performance issues and clearance issues.
2020-10-13 13:49:07 +01:00
88102bca46
Kick the refresh timer for GAL on Win32 with a terrible hack
2020-10-11 21:44:46 -04:00
14c2937fc3
Implement IsDarkTheme for GTK
2020-10-10 14:55:32 -04:00
cc563d254f
Add MSW implementation for IsDarkTheme (for future)
...
As noted, we can't enable this yet as wxWidgets does
not automatically apply a dark theme to the system
colors.
2020-10-10 14:15:30 -04:00
48a5907412
Remove extraneous debug statements
2020-10-08 17:56:54 +01:00
db9e111838
kimath: SHAPE_POLY_SET should re-parent triangulated polygons when copied/cloned
2020-10-08 15:22:17 +02:00
2f49db49bf
Fix fly-off arc handles and move Arc Properties to start/end/angle.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5791
2020-10-08 11:33:32 +01:00
d9485129c8
Implement more context specific cursors using both stock and custom cursors.
2020-10-08 00:50:28 +00:00
16374e9ae1
Ensure string is chosen correctly
2020-10-07 23:23:43 +01:00
8fb154e04e
geometry: SHAPE_RECT: use SquaredDistance() for collision detection
2020-10-07 16:36:37 +02:00
d6fa81036b
geometry: SEG::NearestPoint(SEG) now returns points only on (this) segment
2020-10-07 16:36:37 +02:00
1ef120ff4f
geometry: SHAPE::Format() now outputs C-like code for easy test cases...
2020-10-07 16:36:37 +02:00
7ffef32ea0
geometry: placeholder method for converting compounds to simple polygons [wip]
2020-10-07 16:36:37 +02:00
bd27d38d9a
DRAW_PANEL_GAL: added DebugOverlay() method, creating a temporary overlay for drawing debug graphics
2020-10-07 16:36:37 +02:00
18a3c4c1db
Fix some fairly catastrophic bugs in shape collision optimization.
...
I did a little too much copy & paste last time around....
2020-10-05 22:32:07 +01:00
a28a0e14ba
Fix conversion warnings
2020-10-05 10:41:14 +00:00
8dd7777108
Handle closed shape-line-chain with circle collisions.
2020-10-04 19:40:18 +01:00
f9cfd31351
0 is always a collision (whether clearance is 0 or not).
2020-10-04 13:21:01 +01:00
f4f578b755
Add closed-shape handling to SHAPE_LINE_CHAIN collision routines.
2020-10-04 13:21:01 +01:00
bf67648562
Support optional location reporting in SHAPE collisions.
...
Also fixes a few bugs in the collision routines.
2020-09-28 23:28:33 +01:00
482767a850
libs/kimath: implement indexable subshape support for SHAPE_COMPOUND and SHAPE_POLY_SET
2020-09-27 16:45:46 +02:00
c5feccca53
Add stub functions in KIPLATFORM to detect dark mode
...
These haven't been written yet, but current code can
be adapted to use these now.
2020-09-20 01:43:27 +01:00
d402d93487
Implement shape routines for DIMENSION_Ts.
...
This allows them to participate in DRC and PNS.
Fixes https://gitlab.com/kicad/code/kicad/issues/5712
2020-09-19 14:16:00 +01:00
0f3d2147aa
Performance enhancements for DRC.
2020-09-17 20:13:39 +01:00
08bf5f4b4e
ADDED: 45° snapping for rectangles aka Squares
...
The snap obeys only the Ctrl key and not the global preference setting
for drawsegments because rectangles are _always_ on H/V lines when drawn
Fixes https://gitlab.com/kicad/code/kicad/issues/5607
2020-09-15 11:22:26 -07:00
9f85730987
Make SHAPE_POLY_SET::CacheTriangulation() behavior same as previously.
...
Previously, SHAPE_POLY_SET::CacheTriangulation() was able to handle polygons
with holes.
Due to recent changes, CacheTriangulation( true ) handle polygons with holes,
but CacheTriangulation( false ) did not handle polygons with holes, due to a
missing call to Fracture(), lost in latest changes.
This is now fixed.
Fixes #5606
https://gitlab.com/kicad/code/kicad/issues/5606
2020-09-13 17:55:59 +02:00
35d993988d
Comment update
2020-09-11 09:48:39 -07:00
03f510ff0d
Ensure segmented polys have outlines
...
In the event the calculation removes outlines, we need to keep the
original polygon
Fixes https://gitlab.com/kicad/code/kicad/issues/5594
2020-09-11 08:45:11 -07:00
6b4a6f4d3e
Restore min seg limit for rounded-corner pads.
...
It suffered from a cacophony of errors, starting with an errant
comment that made it later look like a bug. Sigh.
2020-09-11 14:41:45 +01:00
e2bc7557cc
Clean up arc/circle polygonization.
...
1) For a while now we've been using a calculated seg count from a given
maxError, and a correction factor to push the radius out so that all
the error is outside the arc/circle. However, the second calculation
(which pre-dates the first) is pretty much just the inverse of the first
(and yields nothing more than maxError back). This is particularly
sub-optimal given the cost of trig functions.
2) There are a lot of old optimizations to reduce segcounts in certain
situations, someting that our error-based calculation compensates for
anyway. (Smaller radii need fewer segments to meet the maxError
condition.) But perhaps more importantly we now surface maxError in the
UI and we don't really want to call it "Max deviation except when it's
not".
3) We were also clamping the segCount twice: once in the calculation
routine and once in most of it's callers. Furthermore, the caller
clamping was inconsistent (both in being done and in the clamping
value). We now clamp only in the calculation routine.
4) There's no reason to use the correction factors in the 3Dviewer;
it's just a visualization and whether the polygonization error is
inside or outside the shape isn't really material.
5) The arc-correction-disabling stuff (used for solder mask layer) was
somewhat fragile in that it depended on the caller to turn it back on
afterwards. It's now only exposed as a RAII object which automatically
cleans up when it goes out of scope.
6) There were also bugs in a couple of the polygonization routines where
we'd accumulate round-off error in adding up the segments and end up with
an overly long last segment (which of course would voilate the error
max). This was the cause of the linked bug and also some issues with vias
that we had fudged in the past with extra clearance.
Fixes https://gitlab.com/kicad/code/kicad/issues/5567
2020-09-11 11:23:49 +01:00
08d4e91f3b
Change partitions to fixed size
...
Partititioning small polygons causes excessive partitions when we use a
fixed number of cells per side. Partitioning by size keeps the
partition count limited and speeds the calculations.
Also adds an option to not partition the grid for elements (like 3d
raytracing) that do not need it.
Fixes https://gitlab.com/kicad/code/kicad/issues/5579
2020-09-10 09:31:20 -07:00
b1343ca281
Fix NormalizeAngleNeg to be (-360, 0]
2020-09-08 21:21:21 +00:00
a9ef38e6c8
CADSTAR PCB Archive Importer: Load Board shapes
2020-09-08 21:21:20 +00:00
37e268c162
Remove incorrect short-circuit of rotate
2020-09-08 14:10:23 -07:00
efb03b7482
Optimize loading new footprints
...
When loading footprints, we need to skip the triangulation trigger in
rotate. If the triangulation cache is invalid when starting the
rotation, do not retriangulate after the rotation.
2020-09-08 11:17:50 -07:00
aee06e46b0
SHAPE_POLY_SET: split polygons into rectangular cell grids to obtain more regular triangulations
2020-09-08 01:31:42 +02:00
83ac2070fe
BOX2: allow constructing a zero-sized BOX2 from a single point
2020-09-08 01:31:42 +02:00
74623b8c98
geometry: derive SHAPE_LINE_CHAIN, SHAPE_SIMPLE and SHAPE_POLY_SET::TRIANGULATED_POLYGON::TRI from a common base class allowing to simplify collision detection
2020-09-08 01:31:42 +02:00
eb6e1c4f90
geometry: handle collisions of null shapes
2020-09-08 01:31:42 +02:00
5096ac815f
libs/kimath: introducing empty shape object (SHAPE_NULL)
2020-09-08 01:31:42 +02:00
9f128f942c
Move shutdown blocker to kiplatform
2020-09-01 10:14:51 +00:00
fa8655511e
Enable converting segments to arcs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1957
2020-08-29 12:13:51 -04:00
a0d84e94fd
Use move to trash to the project manager instead of immediate delete
...
CHANGED: Delete in the project manager now moves files to the trash can
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2499
2020-08-28 23:00:43 +00:00
ede39780e2
Remove all debugging output that cannot be disabled.
...
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.
There is still some debugging output in test code that really needs to
be moved into a unit test.
Add debugging output section to the coding policy regarding debugging
output.
2020-08-18 10:17:36 -04:00
afc94fdec3
PNS: Be better about handling multiple layers
...
Rather than adding pads/vias multiple times for each layer, we introduce
the "alternate shape" idiom to PNS that allows us to optionally place
the collision constraint on the hole instead of the pad for those
vias/pads that have inner layers removed.
Fixes https://gitlab.com/kicad/code/kicad/issues/5158
Fixes https://gitlab.com/kicad/code/kicad/issues/5198
Fixes https://gitlab.com/kicad/code/kicad/issues/5195
2020-08-16 12:39:15 -07:00
463100d67f
Remove a long-standing hack to keep divots out of adjacent zones.
...
The new algorithm unions any adjacent zones before doing the
chamfer/fillet and then subtracts the other zones back out afterwards.
Fixes https://gitlab.com/kicad/code/kicad/issues/3812
2020-08-12 22:20:08 +01:00
7c455f2357
First pass at DRC RTree functionality
...
This implements a copper-layer RTree with functions for iterating over
the elements in a copper layer and providing Nearest Neighbor returns
for BOARD_CONNECTED_ITEMS
2020-08-11 16:52:29 -07:00
71882a7b0e
Add <algorithm> for std::min/std::max
2020-07-31 03:29:55 +00:00
265f28afe1
Fix a minor compil warning and a Coverity warning
2020-07-30 10:40:51 +02:00
32bd31a1b8
libs/kimath: implement BBox() and Size() methods in SHAPE_COMPOUND
2020-07-29 23:14:03 +02:00
747f2eb948
kimath: fix MTV and actual clearance calculation for SHAPE_COMPOUNDs
2020-07-29 23:14:03 +02:00
48f87dedc9
Implement collisions for SHAPE_COMPOUND
2020-07-29 23:14:03 +02:00
b03044d3d1
kimath/geometry: starting with SHAPE_COMPOUND
2020-07-29 23:14:03 +02:00
9278660b10
Add support for the windows application restart api
2020-07-28 14:32:39 -04:00
d5ff02ad55
Fix compiler warning - those extra brackets aren't needed
2020-07-18 23:55:27 +01:00
3aeb3c8f99
Fix case of 360° arc handling
...
A 360° arc will have the mid point on the opposite side of the circle
from both the start and end points. This will make both slopes the
same, leading to a degeneracy in the calculation. We address this by
noting that the center will be halfway between the midpoint and the
start point.
2020-07-18 13:03:39 -07:00
854e7a4928
SHAPE_POLY_SET: AddHole should return the hole idx
...
Returning the poly index is not useful as it does not allow the use of
other SHAPE_POLY_SET Hole* functions that expect to get the indices of
holes rather than the outline
2020-07-18 13:03:22 -07:00
c407e96b14
std::min/std::max requires <algorithm>
2020-07-11 15:46:57 +02:00
d85a707385
Move rest of DRC to SHAPE collision architecture.
2020-07-06 20:00:50 +01:00
5d5706b8be
Fix incorrect Rotate() functions for shapes circles and arcs.
...
VECTOR2I::Rotate( double aAngle ) returns a rotated point, but does change
the object itself.
Fixes #4810
https://gitlab.com/kicad/code/kicad/issues/4810
2020-07-06 13:50:55 +02:00
5bc6389477
Comments.
2020-07-05 19:53:04 +01:00
82da739786
Better calculations in TransformRoundChamferedRectToPolygon().
...
the old calculations was creating a slightly too small shape for rounded corners.
Now the polygon is outside the perfect shape (as required to create a shape with clearance)
Fixes #4805
https://gitlab.com/kicad/code/kicad/issues/4805
2020-07-05 19:32:07 +02:00
b5adf5bb21
Only try to remove the implicit conversion warning if it is supported
2020-07-03 02:59:19 +01:00
c27207500d
Cleanup some compiler warnings
2020-07-03 00:10:31 +01:00
2cfd6ba978
Fix a couple of integer overflows.
2020-07-02 22:52:37 +01:00
9940931b0f
Fix null dereference in DRC checking.
2020-07-02 22:23:28 +01:00
eb1ff80d57
SHAPE collision fixes.
...
1) An actual distance of 0 is still a collision, even if the allowed
distance is 0.
2) Be consitent about edges and interiors. Everyone expect the edge
of a RECT to be part of the RECT; same with a CIRCLE. SHAPE_POLY_SET
shouldn't be any different. (And SHAPE_LINE_CHAIN was a split-
personality with the edge considered part of it for Collide() but not
for PointInside()).
2020-07-02 21:38:37 +01:00
441dfa30f0
Return individual custom pad shapes instead of a SHAPE_POLY_SET.
...
Also implements an optional pointer to return the actual distance
from all the SHAPE collision routines.
Fixes https://gitlab.com/kicad/code/kicad/issues/4774
2020-07-02 17:09:15 +01:00
32b7b0c617
Fix filled zone rotation and move operations
2020-06-30 22:26:30 -04:00
25c5c35176
Fix compile error on Linux.
2020-06-30 19:15:11 +01:00
40a72d9530
Add SH_RECT handling to 3D shape conversion.
...
Also add some debugging for not-implemented shape cases in other
places to catch simmilar issues in future.
Fixes https://gitlab.com/kicad/code/kicad/issues/4757
2020-06-30 18:32:31 +01:00
da2b7071b4
WYSISYG custom pad editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2153
Fixes https://gitlab.com/kicad/code/kicad/issues/2305
2020-06-27 14:37:01 +01:00
d01b29ab37
Cleanup pad geometry handling.
...
There were a lot of plotters, exporters, etc. that were rolling their
own implementations.
This also introduces a lazily-built set of SHAPE objects for doing
collision detection and some forms of rendering (and later DRC).
2020-06-22 22:28:37 +01:00
d89f8407e0
Const fixes.
2020-06-22 20:36:54 +01:00
08c61e6788
Ensure triangulation follows moving zone
...
Dragging filled zones in OpenGL was extremely slow due to the
invalidated triangulation cache. Moving the zone should also move the
triangles and keep the cache valid.
2020-06-17 19:43:11 -07:00
a5500973a2
Fix SHAPE_ARC hittest and adjust radius return
...
The hittest needs to use distance calc rather than squared distance.
This also adjusts the radius value to be double as to avoid unneeded
loss of precision
2020-06-13 11:23:21 -07:00
a8ab668122
Move SHAPE_ARC to start->mid->end format
...
The arc shapes need to connect with their adjacent points. By storing
the relevant points, we allow exact point matching on both ends of the
arc as well as localize point storage.
2020-06-13 11:23:14 -07:00
df7b67e109
Fix missing virtual dtor
2020-06-11 11:26:55 -07:00
64231a8491
fix a minor wxWidgets alert and a outdated comment.
2020-06-09 14:12:38 +02:00
904687affb
Fix typos.
2020-06-04 22:44:03 +01:00
0ddf53397f
Make sure CvPcb gets its Cancel button fixed up.
...
It's no longer a DIALOG_SHIM so it can't depend on its fixup.
Fixes https://gitlab.com/kicad/code/kicad/issues/4611
2020-06-04 22:35:01 +01:00
a843c74529
Add new kiplatform library for platform-specific code
...
* Implement ReparentQuasiModal for OSX natively
* Implement ForceFocus of OSX natively
This change means we no longer rely on the kicad-specific functions in our osx wx fork.
2020-06-03 14:58:54 +00:00
13493437d0
Add hole-inside-courtyard DRC checks.
...
One for NPTH and one for PTH; both default to "ignore".
Fixes https://gitlab.com/kicad/code/kicad/issues/3434
2020-05-14 22:02:47 +01:00
dfe4a00d43
Add distance reporting for copper item DRC tests.
...
Also adds some performance improvements.
2020-05-01 18:49:42 +01:00
a56191b658
Add distances to a bunch of DRC violation reports.
2020-05-01 18:49:42 +01:00
25d7c0cae2
Opencascade: fix min version: OCE=0.18, OCC=6.9.0
...
Fix also a few minor Coverity warnings.
2020-04-16 10:22:20 +02:00
88d0092e43
libs: added POINT_INSIDE_TRACKER, a state-based class to track if a point is inside/outisde a dynamically built closed polyline
2020-04-15 13:00:48 +02:00
Seth Hillbrand
Marek Roszko
Wayne Stambaugh
jean-pierre charras
luz paz
david-beinder
Michal Schulz
Jeff Young
Tomasz Wlostowski
Jon Evans
Ian McInerney
Thomas Pointhuber
Roberto Fernandez Bautista
Marcus A. Romer
Dominik Wernberger
Mikolaj Wielgus
Simon Richter
hoijui