8a9bf02b7e
Smarten up silk clearance & tented item handling.
...
The inspection tool will report whether or not the item is tented
(indicating in that case that any clearance will only be applied
to any hole).
The DRC test ignores tented items without a hole, and runs the
clearance test against the hole for items with a hole.
Fixes https://gitlab.com/kicad/code/kicad/issues/11954
Fixes https://gitlab.com/kicad/code/kicad/issues/11951
2022-07-08 17:27:05 -06:00
f611f9f5d3
Allow zone connection rules to target footprints.
...
If the pad is set to inherit and a rule targets its parent footprint,
then that rule should fire.
2022-07-08 17:27:05 -06:00
fa2e43f696
Reduce noise in board <-> library footprint tests.
2022-07-08 17:27:04 -06:00
7f9f37e507
Avoid double-caching FP zones
...
Leads to crashes/invalid data when multi-threading hits both at same
time
2022-07-05 20:07:18 -07:00
af6ba1a16e
Fix typos in pcbnew sub-directory
...
Found via `codespell -q 3 -S *.po,./thirdparty,./Documentation/changelogs -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,ba,busses,dout,einstance,leaded,modul,ontext,ot,overide,serie,te,,tesselate,tesselator,tht`
2022-06-30 09:39:45 -04:00
03c279ffd4
ADDED: Threadpool
...
Thread pools are long-lasting executors that have close to zero overhead
when launching new jobs. This is advantageous over creating new threads
as we can use this for threading smalling jobs and smaller quanta. It
also avoids the heuristics needed to determine the optimal number of
threads to spawn
2022-06-24 22:59:24 +00:00
a852286eb5
Cleanup compile warnings
2022-06-21 17:04:56 -07:00
82ebc247b8
More performance enhancements for DRC.
2022-06-18 19:47:11 +01:00
97b0005780
More caching for DRC.
...
Also fixes a bug where some physical clearance tests would be run even
if the clearance was 0 (or if the rule was set to IGNORE).
2022-06-17 23:58:31 +01:00
4043dca613
Push wxString allocation to smaller context
...
Prevents creation of new wxString on stack for each clearance check
2022-06-16 08:26:28 -07:00
5327b10064
Remove shared wxString instance in DRC
...
Threaded DRC access will write to this string, re-allocating the memory
without any synchronization between threads using the string. Comment
adding this listed performance as a reason for using shared strings.
Measured performance does not seem noticeably different in either case,
even with high-error count boards. If there is a case where the
performance is limiting, we can replace these wxStrings with
std::wstring and utilize fmt
Fixes https://gitlab.com/kicad/code/kicad/issues/9888
2022-06-15 16:46:03 -07:00
5e80e2a421
58f553a9ca requires that cache be layer-sensitive.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11814
2022-06-15 00:30:11 +01:00
d14fd5a9da
Fix logic error with silk overlap test.
2022-06-04 19:34:24 +01:00
8b75a32cfa
We only want "actual" shapes, not anything derived from SHAPE.
...
Also fixes a bug where GetParentFootprint would get confused by
groups.
Fixes https://gitlab.com/kicad/code/kicad/issues/11741
2022-06-04 00:24:27 +01:00
d2a9cbe6e8
Use effective width for DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11740
2022-06-03 23:27:10 +01:00
37838dffb9
Make sure physical_clearance rules are run against courtyard layers.
2022-05-10 23:02:53 +01:00
ecf6773f74
Remove dead code.
2022-05-07 21:10:04 +01:00
30ecca464d
Rename mechanical_clearance -> physical_clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11554
2022-05-06 15:54:46 +01:00
dfdedfa605
Fix some issue with NPTH pads with holes same size as pad.
2022-05-06 00:06:00 +01:00
f590dcf513
Fix a couple of typos.
2022-05-06 00:06:00 +01:00
5d0d2201f3
Improve clearance report messages.
...
Removes some duplicated terms; puts in some more headers to make
visual parsing easier, and makes non-connected-pads report the correct
data.
Also fixes a bug where zone-connection overrides of none weren't getting
handled correctly.
Fixes https://gitlab.com/kicad/code/kicad/issues/11544
2022-05-03 16:30:04 +01:00
bf2566a44f
Post-process board min clearance rather than building it in to netclasses.
...
The later makes the diagnostic messages harder to decipher.
2022-05-03 13:39:14 +01:00
d192d3c31d
Better violation title for disabled layers check.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11451
2022-04-25 09:39:49 +01:00
f0dab2e07b
Fix some layer handling issues.
2022-04-23 21:29:46 +01:00
e6684bf7c7
Add footprint checks to board-level DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11437
2022-04-23 11:34:18 +01:00
4525b1f085
More consistency in DRC error messages.
2022-04-23 09:39:34 +01:00
9ff1ae5bdc
Better inspection reporting for netclasses, custom rules and DRC.
2022-04-17 00:33:56 +01:00
7f3a75bccd
Add a bunch more inspections for rule resolution.
2022-04-15 22:10:13 +01:00
819276bd98
DP tolerance needs to be 1IU on each axis
...
ApproximatelyParallel will only check for parallel within 1 IU, so a 1x1
SEG will always be parallel and the projection is invalid
(cherry picked from commit d0796399a2
2022-04-11 16:58:10 -07:00
82820d4b1c
Cleanup.
2022-04-09 20:39:35 +01:00
722b2588f4
Better error reporting for DP uncoupled length.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10087
2022-04-08 11:40:53 +01:00
a118249093
NPTHs obey HOLE_CLEARANCE, not CLEARANCE.
...
Also, plating thickness appears on both walls, so diameter is drill
plus 2X plating thickness.
2022-04-04 20:43:08 +01:00
f7cdc7af75
Apply a more sophisticated test for ignoring isInCoupledDiffPair.
...
The basic problem is that the DRC engine does length testing and skew
testing by collecting all the diff pair constituent parts and pairing them
itself. Since each part is collected on its own, we need to ignore the
'B' unit when evaluating any conditional expressions. However, doing this
in general means that when evaluating "OwnClearance()" we also ignore the
'B' unit and return the diff pair CLEARANCE_CONSTRAINT when we shouldn't.
This implements a more discerning test which know what the current requested
constraint is when evaluating expressions.
See also https://forum.kicad.info/t/solved-custom-differencing-rule-not-working-drc/34034/6
Fixes https://gitlab.com/kicad/code/kicad/issues/11314
2022-04-02 15:12:42 +01:00
150859c973
Try Coverity fixes that don't break unit tests.
2022-03-25 16:49:29 -04:00
7da7864f5e
Fix some Coverity issues.
2022-03-25 15:51:05 -04:00
b679a21651
Zero out parent rule when overridden by local property.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11197
2022-03-21 20:49:35 +00:00
cf611f1742
Better safety around layersets.
2022-03-21 18:19:00 +00:00
5aa561abe1
Add overlapping pad test and share some tests between board & fp editor DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10086
2022-03-18 19:58:42 +00:00
0f359c8a3b
Careful of calculated fields when comparing board FPs with library.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10143
2022-03-17 13:19:25 +00:00
62f813fddc
Better error reporting for PTH pads.
2022-03-16 14:56:32 +00:00
f596ae3487
Allow mechanical-clearance checks between edge_cuts and other layers.
2022-03-16 14:56:32 +00:00
600dcd31ad
Allow track board edge clearance violations inside the holes of castellated pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-15 00:05:23 +00:00
8d682002c3
Fix previous breakage from shared_ptr going out of scope.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-14 23:57:50 +00:00
e7bf4ab8fa
Separate board-edge silk clearance from mask-edge silk clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-14 20:19:09 +00:00
2ec21c7720
Don't check for board edge collision on castellated pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-14 20:19:09 +00:00
65185f53a1
Rotate fp zones before comparing with library versions.
...
Also includes some performance fixes to not copy around triangulation
data when it's not needed.
Fixes https://gitlab.com/kicad/code/kicad/issues/10143
2022-03-14 15:53:24 +00:00
ced1e68ea1
A bit of wxT().
2022-03-13 16:09:06 +00:00
db0b733be5
Clear DRC caches before running soldermask tests again.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10922
2022-03-12 19:44:34 +00:00
89e61ff73b
More performance enhancements for DRC.
2022-03-12 14:17:52 +00:00
6f555b6258
wxT() and some cleanup in DRC.
2022-03-11 23:19:16 +00:00
eec528ae48
Fix GCC build error on Linux.
2022-03-11 17:03:01 -05:00
ae307e1b34
Parallelize DRC triangulation, keepout processing, and sliver checking.
...
Also fixes issue with adding fractured polygons in sliver checking which
slowed the board from hell down to less than a crawl.
2022-03-11 20:52:11 +00:00
663edcf665
Better progress indication for board from hell.
2022-03-09 14:30:21 +00:00
e4b56ab7f1
Performance fixes for the board from hell....
2022-03-08 23:54:34 +00:00
1fc99dd2c0
Don't call GetLayer() on a multi-layer object.
2022-03-05 23:07:43 +00:00
843a56c4e4
Implement two-staged zone priority: assigned priority followed by UUID.
2022-03-01 14:53:35 +00:00
914e706023
Replace zone-with-no-pads test with isolated copper test.
...
The later is far more discriminating.
Fixes https://gitlab.com/kicad/code/kicad/issues/11009
2022-03-01 12:02:17 +00:00
79c7859052
Apply a19d9105f0 to zone case as well.
...
Also improves on the previous comments.
Fixes https://gitlab.com/kicad/code/kicad/issues/10922
2022-02-21 13:48:34 +00:00
86988225c3
Exclude some fab attrs from library parity check.
...
Also excludes zone outline hatching, which is just a visualization
property.
Fixes https://gitlab.com/kicad/code/kicad/issues/10903
2022-02-19 14:59:50 +00:00
a19d9105f0
Fix SolderBridge check to only check across multiple
...
We should not generate an error when overlapping a single copper element
with a soldermask that is not associated with copper.
Fixes https://gitlab.com/kicad/code/kicad/issues/10906
2022-02-18 11:47:28 -08:00
6f6cf995ba
Don't ask for layer of multi-layer item.
2022-02-18 14:53:10 +00:00
1ee3ce45e8
Don't ask for layer of multi-layer objects.
2022-02-18 14:19:13 +00:00
ce0233577b
Don't try to fetch layer of multi-layer objects.
2022-02-18 13:20:36 +00:00
e09ecd8380
Don't ask for layer of multi-layer objects.
2022-02-18 13:20:36 +00:00
2172810600
Performance: better sharing of zone fills.
2022-02-15 19:19:03 +00:00
3deaf902bb
Retire the V5 zone fill algorithm.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10578
2022-02-11 13:10:52 +00:00
50a4d610a6
Be cognizant of flashed layers when generating pad shapes.
2022-02-11 13:10:52 +00:00
ca56de7816
Show DRC overflows in both tab titles and number badges.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10617
2022-02-09 17:04:32 +00:00
06e00c7957
Fix shadow variable compile warning in text DRC provider.
2022-02-08 09:26:12 -05:00
3b5474f190
Don't punt on TrueType char thickness; analyze it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10740
2022-02-08 14:10:37 +00:00
137edbe3f3
Add disclaimer for TrueType fonts to thickness test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10740
2022-02-08 14:10:37 +00:00
3c5ae6d317
Don't let zone cutout on different layer confuse us about intersections.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10583
2022-02-08 14:10:37 +00:00
091055fa1d
Don't count track as a pre-existing connection.
2022-02-08 14:10:37 +00:00
5ce559176d
Overhaul the font metrics calcs for overbar, italics and bboxes.
2022-02-07 17:36:40 +00:00
e59aaf05c6
Make sure that GetConnectedItems searches from the root item.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10583
2022-02-06 19:43:25 +00:00
b2e3f03222
More wide-string declarations.
2022-02-05 22:03:04 +00:00
193dee11e8
Add missing null check PVS V595
2022-02-05 11:25:09 -05:00
c8d14ade65
Only run starved-thermals checks when pad is actually connected to zone.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10583
2022-02-02 13:09:27 +00:00
63a3b1e20a
Estimate outline font thickness for DRC readability checks.
2022-02-01 12:01:04 +00:00
1f8c29c395
Coverity fixup.
2022-02-01 12:01:04 +00:00
5739505aa3
TextBoxes for PCBNew.
2022-01-31 20:00:47 +00:00
c01e2dcfec
Fix large memory leak in DRC
...
All elements get effective shapes, many of which get triangulated. This
memory needs to be freed when destroying the tree
(cherry picked from commit c2707f3cc0
2022-01-28 17:08:33 -08:00
29841ba315
Bring ERC & DRC dialogs into parity.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9350
2022-01-22 22:27:41 +00:00
14006495d5
Angle cleanup.
2022-01-20 22:35:41 +00:00
038db715a3
Move zone hatch orientation to EDA_ANGLE.
2022-01-19 00:34:03 +00:00
f60c05fc67
Use epsilon compartor for doubles.
2022-01-18 18:40:55 +00:00
8c246a761d
Move EDA_ANGLE from int to double.
2022-01-17 20:57:54 +00:00
0967cc82e2
Exclude rules which match no enabled layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10227
2022-01-15 01:30:03 +00:00
bc77a1e2dd
drc_test_provider_library_parity: fix a crash due to a incorrect if()...else() logic.
...
The incorrect logic allowed execution of the else sequence when it should not be executed.
2022-01-14 18:17:27 +01:00
07013d00e1
More EDA_ANGLE.
2022-01-14 16:08:19 +00:00
abd3f5bc2b
Move footprints to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
d485eb2514
Move pads to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
cf11abda3d
Fix test_drc_regressions.cpp: disable tests that need a footprint library
...
DRCE_LIB_FOOTPRINT_ISSUES and DRCE_LIB_FOOTPRINT_MISMATCH imply a library
but the test cases do not have a library.
2022-01-12 15:57:41 +01:00
ea3efac2b6
drc/drc_test_provider_library_parity.cpp: protect against null pointer use.
...
qa tests, test_solder_mask_bridging.cpp: filter not relevant DRC tests
2022-01-12 14:41:11 +01:00
8c6c87eaf4
Separate footprint lib issues from footprint mismatch issues.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10132
2022-01-11 22:28:24 +00:00
fcfe42d67c
Continue the war on wxPoint
2022-01-10 19:52:26 -05:00
21790fcab7
Fix a pair of dereference-freed-pointers in DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10335
2022-01-10 21:06:03 +00:00
c24985e8cf
drc_test_provider_sliver_checker.cpp: skip very small vertices when testing.
...
Very small vertices (length <= 2 or 3 iu) are frequent in filled areas, and
create false positive detections because one cannot calculate a meaningful
orientation of these vertices.
2022-01-10 11:50:29 +01:00
2b20a58615
Zone fill: fix an issue that uses thermal spoke width as thermal gap.
...
Fixes #10300
https://gitlab.com/kicad/code/kicad/issues/10300
2022-01-08 14:24:14 +01:00
33dbe92deb
drc_test_provider_mechanical_clearance: add missing handling of SHAPE_T::RECT
...
test_ee_item.cpp: add missing call to ClearFieldsAutoplaced();
2022-01-08 10:49:47 +01:00
b70cf1473f
Allow solder mask aperture objects to inherit nets during DRC.
...
The issue is that object A (the solder mask aperture object) can
bridge objects B and C which have different nets. Since we only do
object-to-object compares we don't find this. By allowing object A
to inherit the first net it collides with (either object B's or
object C's), we'll generate a violation with the second collision.
Fixes https://gitlab.com/kicad/code/kicad/issues/10189
2022-01-03 20:58:01 +00:00
0365c6bf4b
Coverity fixes.
2022-01-02 14:57:03 +00:00
7d671cff1e
Scoop up some more wxPoints
2022-01-01 21:06:40 -05:00
dafa8ec671
pcbnew: fix incorrect type cast in DRC_TEST_PROVIDER_TEXT_DIMS
...
FP_TEXT cannot be casted to PCB_TEXT for obvious reasons, but what I don't understand is why downcasting to EDA_TEXT also crashes due to incorrect vtable method pointer (Clang10/Linux here).
I leave this as a curiosity for whoever knows C++.
2022-01-01 22:42:16 +01:00
c4c56de708
Neurotically update position wxPoint usages
2022-01-01 11:55:51 -05:00
347e03363a
Convert wxPoint/wxSize starting from EDA_RECT usages
2022-01-01 11:30:33 -05:00
0e9cfd0af2
Add missing initialization values to variables
...
Flagged by Coverity.
2021-12-30 23:42:06 +00:00
dc98419d85
pcbnew: Add via height support in drc length
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10135
(cherry picked from commit 11c967b259
2021-12-30 09:35:10 -05:00
ab583a32f9
Better layer handling for DRC markers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10126
2021-12-26 15:06:12 +00:00
03a5bd5319
Handle flipped footprints in library compare algorithm.
...
Also fixes a bug where line styles weren't taken into account.
Fixes https://gitlab.com/kicad/code/kicad/issues/10107
2021-12-25 13:41:59 +00:00
09b7e0b72b
ADDED Exclude Footprint from Courtyard Requirement.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9881
2021-12-24 21:10:28 +00:00
d649b288a6
Swap out autoplace rotation costs for private footprint layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2291
Fixes https://gitlab.com/kicad/code/kicad/issues/5391
2021-12-24 21:10:28 +00:00
fa908e1f98
Dimensions for footprints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8441
2021-12-24 21:10:28 +00:00
ed79f6e511
Clean up some TODOs.
2021-12-24 21:10:28 +00:00
b4c5e64db2
Exclusions for Unconnected Items; Markers & exclusions for Parity checks
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5589
Fixes https://gitlab.com/kicad/code/kicad/issues/5504
2021-12-24 21:10:28 +00:00
b7e196b710
ADDED assertion constraints for user-defined DRC checks.
2021-12-24 16:13:18 +00:00
4ba3937f8a
Cleanup.
2021-12-24 15:43:24 +00:00
0332ec6016
ADDED exclude all violations of rule X.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5463
2021-12-24 15:42:22 +00:00
5f37c2b247
Custom rule severities.
...
ADDED severity token to custom rule syntax. Each rule can now define
its own severity.
Fixes https://gitlab.com/kicad/code/kicad/issues/6148
2021-12-24 15:42:22 +00:00
b2dff6fa55
Fix solder mask plotting issues.
...
1) Don't plot all footprint texts for each footprint graphic item.
2) Enforce min web thickness around board shapes and board text.
3) Enforce min web thickness around footprint shapes
4) Correctly handle multi-layer zones.
(1) and (4) will get cherry-picked back to 6.0, so after rebasing
won't actually appear in this changelist anymore....
2021-12-24 12:36:45 +00:00
ef10b36948
Add mask-to-copper clearance parameter and rename mask margin.
2021-12-24 12:36:41 +00:00
3aa6d73770
Allow min/max/opt to come from different rules.
2021-12-24 12:36:37 +00:00
4b6f2f0658
Add mechanical copper clearance testing for shapes.
...
Also includes going from distance-based neighbor exclusion to angle-
based. (Distance doesn't work when very short segments are followed
by very long ones.)
Fixes https://gitlab.com/kicad/code/kicad/issues/2512
2021-12-24 11:40:10 +00:00
1305c2177f
Add a checker for copper-to-copper clearance within a single zone.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2512
2021-12-24 11:40:06 +00:00
5433684d3c
Try to make gcc happy.
2021-12-23 23:59:48 +00:00
235e0a430d
Less flashing of the progress bar.
2021-12-23 22:31:33 +00:00
56c85bd354
Improve clearance and constraint resolution reporting.
...
1) Report on all applicable clearance types
2) Don't double-book constraints if they're used by more than one
test provider
Fixes https://gitlab.com/kicad/code/kicad/issues/8961
2021-12-23 22:31:26 +00:00
3f64b69917
Mechanical clearance rules.
...
ADDED mechanical_clearance and mechanical_hole_clearance constraints.
Fixes https://gitlab.com/kicad/code/kicad/issues/2183
2021-12-23 22:31:21 +00:00
a48867ea01
Solder mask integrity testing.
...
ADDED DRC test for solder mask aperture bridging copper from different
nets.
ADDED visualization of minimum web width processing for solder masks.
ADDED allow_soldermask_bridges property for footprints.
Fixes https://gitlab.com/kicad/code/kicad/issues/2183
Fixes https://gitlab.com/kicad/code/kicad/issues/1792
2021-12-23 22:31:14 +00:00
533276e6b6
Copper sliver checking.
...
ADDED DRCE_COPPER_SLIVER DRC error.
ADDED ADVANCED_CFG DRCSliverWidthTolerance and DRCSliverAngleTolerance.
Fixes https://gitlab.com/kicad/code/kicad/issues/2183
2021-12-23 22:31:05 +00:00
a1e3f2b188
Starved thermals DRC checking.
...
ADDED min_resolved_spokes constraint.
ADDED "Thermal relief connection to zone incomplete" violation.
Fixes https://gitlab.com/kicad/code/kicad/issues/2183
2021-12-23 22:30:42 +00:00
32721755bf
Hook up zone-pad connections to custom rules.
...
ADDED zone_connection constraint.
ADDED thermal_relief_gap and thermal_spoke_width constraints.
ADDED angle override for thermal relief spokes in Pad Properties.
Fixes https://gitlab.com/kicad/code/kicad/issues/4067
2021-12-23 22:30:26 +00:00
92e589b398
Use board maxError value, and return SH_ARC for unfilled circle.
2021-12-23 20:36:11 +00:00
2bc86fa0a8
Shapes for schematic.
...
ADDED arc, circle and rectangle shapes for schematic. Shapes support
line styles and fill colors.
CHANGED sheet background color in Edit Text & Graphics Properties to
fill color (and it now affects shapes).
Pushed STROKE_PARAMS down into common and moved all shapes to using it
for stroke descriptions.
2021-12-23 20:36:07 +00:00
4b6bf3095a
Radial dimensions.
...
ADDED radial type dimensions.
Fixes https://gitlab.com/kicad/code/kicad/issues/2056
2021-12-23 19:34:54 +00:00
21eb928218
Add Ignored Violations tab to DRC dialog.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7726
2021-12-23 19:18:45 +00:00
2001d08186
Add DRC tests for text height and text thickness.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8683
2021-12-23 19:18:45 +00:00
0a609dd48d
Add footprint library checking to DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6821
2021-12-23 19:18:45 +00:00
24fe5bc2a8
Fix DRC thread locking
2021-12-15 06:05:40 -08:00
40d44c94cd
Fix single-threaded loads/connectivity
...
We cannot set thread counts to hardware_concurrency()-1 without
considering that single core machines will get a thread count of 0.
2021-12-14 17:18:46 -08:00
0dcbfa2b69
Always use UUIDs for implicit keepout rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9580
2021-11-09 17:57:47 +00:00
6af031be05
Use double-quotes for rule expressions.
...
The Mac double-quote bug is now fixed and strings inside expressions
are single quoted making single-quoting the entire expression pretty
hard to visually parse.
2021-11-08 20:53:59 +00:00
ffd1139cfe
Make sure a pad is at least as big as its hole in the RTree.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9516
2021-11-03 18:53:26 +00:00
40e6a9a926
Fp editor: add DRC test for through hole pads without hole.
2021-10-19 14:47:29 +02:00
856cc26d4c
Allow vias the same same-net waiver that pads have for hole clearance
...
Note that in 7.0 we have physical_hole_clearance rules to give a bit
more expressivity here.
Fixes https://gitlab.com/kicad/code/kicad/issues/9420
2021-10-18 18:09:40 +01:00
b52529521e
Replace individual LIB_* shapes with LIB_SHAPE (based on EDA_SHAPE).
...
Also moves to more capable FILL_T model that can be shared.
2021-10-15 12:45:43 +01:00
fce054319c
Update DRC MatchDPSuffix routine
...
This matches the router matchDPSuffix routine until we merge the two
into a common utility
2021-10-11 10:33:50 -07:00
dfe4997664
Fix nullptr crash.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9250
2021-09-27 10:27:25 +01:00
3e7310a219
Move FP type check to FP DRC
...
Checks for validity are better centrally located where they don't
interrupt user actions
2021-09-25 08:56:27 -07:00
c38de1dcaf
Pull back some 7.0 fixes to Custom Rules code completion.
2021-09-23 13:08:31 +01:00
Jeff Young
Seth Hillbrand
luz paz
Wayne Stambaugh
Marek Roszko
jean-pierre charras
Tomasz Wlostowski
Ian McInerney
Erwan Rouault