3ee31473c6
cortexm.c: LPC15xx has designer 43b and Partno 4c3
...
Thanks to JojoS!
2020-11-27 22:26:48 +01:00
62d9f60f03
hosted/firmware: Waits for read response as long as cortexm_wait_timeout.
2020-11-27 22:26:48 +01:00
26a23dd1cb
stlinkv2: Try harder to open an AP.
...
Problem seen on STM32L0 with probably long sleep periods.
2020-11-27 22:26:48 +01:00
19e1fddba2
adiv5: Remove unnescessary read.
2020-11-27 22:26:48 +01:00
cda83d3084
Fix memleaks.
...
Happened e.g. when Stlink could not enter debug or when cortexm_prepare timed out.
2020-11-27 22:26:48 +01:00
9ac5adfcef
adiv5: Additional decoding.
2020-11-27 22:26:48 +01:00
d78d7838d3
stm32f1: Always read DBGMCU_IDCODE for t->idcode ( #770 )
...
At least STM32F042 has 0x440 as romtable partno vs 0x445 as DBGMCU_IDCODE.
Thanks to Andrey Melnikov(aam335) for pointing out!
2020-11-27 22:26:48 +01:00
653d486ee2
cortexm: Store CPUID in target structure.
2020-11-27 22:26:48 +01:00
824a1d8abc
hosted/find_debuggers: Do not check hubs. Print class of devices unable to open.
2020-11-27 22:26:48 +01:00
e68dd25813
cl_utils: Clarify -d option is BMP/firmware only and deprecate -d.
2020-11-27 22:26:48 +01:00
f71e18948a
GPIO for SWD: Slow down edges on more platforms.
2020-11-27 22:26:48 +01:00
80154c5c7a
adiv5_swdp: Fix more memory leak.
2020-11-27 22:26:48 +01:00
35bcb4f7c6
Switch on the lpc546xx target
...
Enable the lpc546xx target. Tested on the LPCXpresso54628 dev board,
able to flash and debug.
2020-11-24 21:32:39 +01:00
e9c02296f2
target: kinetis: add S32K118
...
This adds support for the NXP S32K118. This is an automotive-grade part
that is derived from the Kinetis line, so it has a very similar
interface to other parts in the family.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-11-14 13:06:23 +01:00
f18be6ef7a
Add support for Kinetis K12 and placeholders for other K-series MCUs
2020-11-07 12:44:05 +01:00
2c33cde63f
cortexm.c/cortexm_halt_resume: Add some clock cycles to always get CPU going ( #768 )
2020-11-01 21:53:23 +01:00
d75f3124b9
ftdi_bmp.c: Reapply fix from #715 : Check for libftdi 1.5
2020-11-01 12:09:27 +01:00
99142d1c0e
Add documentation details for building PC-hosted BMP in msys2.
2020-11-01 11:33:54 +01:00
1f7a716710
adiv5.c: Run cortexm_prepare on all suspected CortexM instances.
...
Gets all debug units of the second CPU of a STM32H745 visible.
2020-10-23 09:40:15 +02:00
18673d9a56
adiv5: Rework DP/AP refcounting.
...
ASAN non longer reports leaks with the STM32H745.
2020-10-23 09:40:15 +02:00
f76a7c4e92
adiv5: Release devices after scan.
...
Before, scanning only kept device stopped until POR or attach/detach cycle.
2020-10-23 09:40:15 +02:00
73e6b540b2
command: When debug channel is available, print morse messages readable.
2020-10-23 09:40:15 +02:00
776861c6a0
Makefile: Fix version.h generation for make all_platforms
...
Same fix as 0ae65cc10f
2020-10-23 09:40:15 +02:00
80ddafc2f8
Jtag/High Level : Transfer dp->dp_jd_index with every HL command.
...
- Add REMOTE_HL_VERSION, now at 1. Fall back to hosted/low-level
when wrong version is found and give hint to user.
2020-10-23 09:40:15 +02:00
59dc1b7eb4
cortex-m7: Give hint about buggy core revision.
2020-10-23 09:40:15 +02:00
976c763747
jtag remote: Start fixing handling M0 (second jtag) for LPC4322 in high-level
...
- LPC11: Only print none-null unknown idcodes.
2020-10-23 09:40:15 +02:00
0995fe1288
cmsis-dap: Various fixes
...
- decrease report size to 64, otherwise MIMRXT10x0-EVK crashed when
reading larger memory block
- dp_read_reg acts direct, fixing CortexM core register read.
- length of data to write with read_block.
2020-10-23 09:40:15 +02:00
f15b1d7763
cl_utils: Clip opt_flash_start only when not set.
2020-10-23 09:40:15 +02:00
c161521c26
cortexm: Designer ARM must be in the default path when probing.
2020-10-23 09:40:15 +02:00
cdd07544d5
Cortexm: Allow pure debug on devices not yet handled for flashing
...
- Recognize STM32L552 and MIMXRT10XX
- Fix another PIDR
- Fix bad debug print string.
2020-10-23 09:40:15 +02:00
3270138ec2
Revert 69e577c9243ce027b628e96881ce2416213fef43
...
What was thought to be a typo is apsel = 0xff for a dp access.
2020-10-23 09:40:15 +02:00
77c4f9d702
stlink: Rework README.md
...
- Document flashing BMP Firmware and reverting to ST firmware
- Consistant nameing
2020-10-19 14:13:29 +02:00
9cd3193a89
bmp_remote.c: Fix bug introduced with 8b929c12c9.
2020-10-17 12:49:37 +02:00
0ffb4f7b18
cortexm: Fix protected SAM detection
...
- Only run cortex_prepare() if reading cidr fails
- With Atmel DSU detected, run cortexm_probe()
2020-10-17 12:49:37 +02:00
5bc743d221
samd: Propagate security after setting security by chip reset.
2020-10-17 12:49:37 +02:00
8b929c12c9
hosted/jtag: Transfer jtag_devs to firmware.
2020-10-16 20:03:03 +02:00
3d92b82678
jtag: Use index and not device structure for jtag_dev_write_ir and jtag_dev_shift_dr
2020-10-16 20:03:03 +02:00
6e2a074064
bmp_remote: Deny high level JTAG for now.
...
jtag_devs and jtag_dev_count needs to be known on th firmware side
and remote_dp->dev needs to be filled with jtag_dev_t.
2020-10-16 20:03:03 +02:00
0f5fb6b9a0
remote: Initialise dp_read and low_access with SWD_INIT.
...
Before "mon s" after "mon j" failed.
2020-10-16 20:03:03 +02:00
752d14ca3e
remote.c: Add comments.
2020-10-16 20:03:03 +02:00
ba26adce53
remote.h: Remove typo.
2020-10-16 20:03:03 +02:00
7ccf0d3e03
jtag_dev_t: Make dev, idcode and desc less generic.
...
No codechange intended.
2020-10-16 20:03:03 +02:00
87b546777a
nrf51: Be more verbose about the protection status.
2020-10-16 12:16:33 +02:00
4108b649c2
stm32h7: Add support for new product lines
...
Add support for:
* STM32H7B3/B0/A3 (RM0455)
* STM32H723/33/25/35/30 (RM0468)
Successfully tested with:
* STM32H7A3ZIT (RM0455)
* STM32H747XIH (check for regressions)
2020-10-10 22:09:34 +02:00
817c62d7fd
Merge pull request #507 from UweBonnes/cortexm_romtable
...
Cortexm romtable
2020-10-08 10:53:17 +02:00
877b4be8ee
cortexm: Restrict probing by using the ap_designer.
...
More designers need to be observed and reported by users and added.
Request users to send needed data.
2020-10-07 20:12:35 +02:00
91d1ef8bf6
target/stm32: Use t->idcode with probe.
2020-10-07 20:12:35 +02:00
44bfb62715
Adiv5: Print Designer/Partno when device is not recognized
...
t->idcode is now 16 bit.
2020-10-07 20:12:35 +02:00
c456fc7f61
adiv5: Store AP designer and partno in the AP structure.
2020-10-07 20:12:32 +02:00
159196c2ad
Cortexm: Remove forced_halt.
2020-10-07 20:11:33 +02:00
9bb2807706
adiv5/romtable: Prepare CortexM devices to read the ROMTABLE
...
It seems, writing to DHCSR fails silent when the device is sleeping.
Reading DHCS during sleep may return nonsense.
Repeated write may at some point catch the device running and succeed.
With devices sleeping for long time and running on faster clock the
chance for a successful hotplug gets smaller.
- Try hard to halt a sleeping device
- Prepare vector catch and enable all debug units by TRACENA
- Release reset
- Apply device specific fixes
-- STM32F7: Store old value of DBGMCU_CR, enable debug in sleep in
DBGMCU before reading PIDR and restore DBGMCU on detach.
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
2020-10-07 20:11:17 +02:00
a254bc6308
Fix icdi usb error https://github.com/blacksphere/blackmagic/issues/740 https://github.com/blacksphere/blackmagic/pull/748
2020-10-07 18:08:04 +02:00
ceaee2a11e
hosted: Hint about BMPs in bootloader mode.
2020-10-07 17:12:22 +02:00
dc8924a2bc
stm32h7: Don't tc_printf from flash functions ( #747 )
...
* stm32h7: Don't tc_printf from flash functions
Receving an 'O' packet while flashing confuses GDB and then
weird stuff happens.
* Replace tc_printf with DEBUG_WARN
2020-10-05 10:45:18 +02:00
9bba3165fb
swdptap: Turnaround immediate after a reading with parity.
...
Thanks to JojoS.
Probably mostly cosmetic, but is keeps the device from driving SWDIO
until the next commands.
2020-10-02 10:51:14 +02:00
4d18496a6f
hosted: Allow to disable high level commands for BMP.
...
Useful for tracking low level problems on native with hosted.
2020-10-01 15:49:21 +02:00
014abf6cc9
adiv5.c: Reduce number of errors if reading cidr fails.
2020-10-01 15:33:28 +02:00
be40d2b851
adiv5: Check Debug Base Address early
...
Reduces printout when scanning the romtable
2020-10-01 15:22:17 +02:00
747336e927
f4discovery: Slow done JTAG pin slew rate to avoid ringing #742
2020-10-01 15:06:16 +02:00
38bc5bbf82
Add LPC546xx support #741 #553
2020-09-30 12:56:53 +02:00
2fdd94adeb
STM32F7: Add another missing Arch ID.
2020-09-24 16:20:34 +02:00
0ae65cc10f
src/Makefile: Fix version.h generation.
...
It seems, some git behaviour change got by unnoticed.
2020-09-22 19:02:26 +02:00
61d919c1ac
libftdi: Remove no longer needed workaround for travis CI.
2020-09-20 14:10:37 +02:00
77231e8972
serial_no: Fix error with "mon trace" #732
...
launchpad-icdi: Allow to set a serial number with make
2020-09-20 13:23:52 +02:00
bdb351a6ea
adiv5_swdp: On ACK_FAULT, error() and try again once #731
...
when writing CSW.
2020-09-18 20:07:32 +02:00
a4a934f461
Add comments for hardware revision of v2.1
2020-09-17 11:54:19 +02:00
75b5e72a00
Fix typo
2020-09-16 18:41:56 +02:00
de01a75ca9
Fix broken link to bluepill pinout.
2020-09-15 20:58:10 +02:00
6d18a61b2e
hosted: Make ASAN build optional.
...
Use ASAN=1 on the make command line to activate,
2020-09-11 15:23:13 +02:00
120b3134bb
Add SAM4SD32C/B support.
2020-09-07 17:36:15 +02:00
8289862b55
gdb: Reset flash_mode with when erase or flash fails.
...
Thanks to Dave Marples <dave@marples.net>, extracted from #607
2020-09-04 15:17:29 +02:00
58281ec232
SWD Timing: Enhance SWD high time with low speed loss.
...
On F103 no high time < 80 ns and no low time < 100 ns was seen with a scope
2020-09-04 14:45:34 +02:00
af3480e523
hosted: Update Readme.md
2020-09-04 11:49:13 +02:00
6650831243
ftdi: Get turtelizer (JTAG only FT2232D dongle) going
...
FT2232D seems to dislike "Set TCK/SK Divisor" or
"Set Data Bits Low Byte" as first command on a non-first run
- Add printout when garbage is found
- Add "Disconnect TDI to TDO for Loopback" as first MPSSE command
(seemed to help!)
2020-09-04 11:49:13 +02:00
74b3baad1e
ftdi_bmp : Another size fix and small rearrangement.
2020-09-04 11:49:13 +02:00
aeb97466b9
libftdi: Automatically switch to JTAG if SWD is not possible.
2020-09-04 11:49:13 +02:00
ae8cb8ab46
ftdi_bmp: Reject writes with no data.
...
Pending transfers made the MPSSE behaviour strange and unpredictable.
2020-09-04 11:49:13 +02:00
c41ab1738e
ftdi/swdptap: Use parity builtin. Fix array width.
2020-09-04 11:49:13 +02:00
34d0f8a2a1
ftdi: Recognize bitbang SWDIO settings.
2020-09-04 11:49:13 +02:00
6ac0a25123
ftdi: Add UM232H as probe.
2020-09-04 11:49:13 +02:00
d73a6a3d29
platform/ftdi: Do not double initialize.
2020-09-04 11:49:13 +02:00
f0b0639189
ftdi: Output wire debug.
2020-09-04 11:49:13 +02:00
e95e5e3fba
ftdijtag: Really enable TMS/TCK/TDI driver.
2020-09-04 11:49:13 +02:00
f4eed249eb
hosted/ftdi: Allow to list supported cables.
2020-09-04 11:49:13 +02:00
8a2bce26f2
Hosted: Fix memory leak when platform_swdptap_init fails.
2020-09-04 11:49:13 +02:00
7b497302c0
hosted/ftdi: Autodetect ftdi cables with distinguishing feature.
2020-09-04 11:49:13 +02:00
a83e76bef9
libftdi: Add USBMATE.
2020-09-04 11:49:13 +02:00
c78066255d
libftdi: Infrastructure to test for target voltage present.
2020-09-04 11:49:13 +02:00
aff624b6e0
libftfdi: Allow to specify external resistor SWD connection.
...
More explanations in src/platforms/hosted/Readme.md
2020-09-04 11:49:13 +02:00
eabf45357d
libftdi: Reinitialize pins when switching JTAG/SWD.
2020-09-04 11:49:13 +02:00
05534e9b49
libftdi/swdptap: Provide SWD using generic MPSSE if hardware allows.
2020-09-04 11:49:13 +02:00
40ba261982
libftdi: Use asynchronous transfers if header indicate newer libftdi1.
...
This is a hack to keep travis happy. Setting up travis to use a recent
libftdi1 is a major issue.
2020-09-04 11:49:13 +02:00
9b6e19785e
Implement SRST for libftdi.
...
Travis GCC needs -Wno-missing-field-initializers or will otherwise warn.
2020-09-04 11:49:13 +02:00
dea4be2539
Add ifdef to check for libftdi 1.5 to use ftdi_tcioflush instead of ftdi_usb_purge_buffers
2020-08-21 13:10:55 +02:00
7e1b0321e2
Cleanup Makefiles for hosted bmp on darwin
2020-08-21 11:28:17 +02:00
5908fc2da1
Add serial auto-connection to darwin target
2020-08-21 11:28:17 +02:00
e75eb19d78
cmsis_dap: Detect CMSIS-DAP before STLINK
...
Debugger may be realized with the ST USB Vendor ID.
2020-08-16 15:20:58 +02:00
998a9747f8
cmsis_dap: Make some errors more prominent.
2020-08-16 15:20:58 +02:00
c97c4a0960
hosted: Better decoding for ap_decode_access().
2020-08-16 15:20:58 +02:00
badff20099
cmsis_dap.c: Fix dap_dp_read_reg.
2020-08-16 15:20:58 +02:00
Uwe Bonnes
Noah Pendleton
Sean Cross
jbuonagurio
Stoyan Shopov
Richard Meadows
David A. Aguirre Morales
Gareth McMullin
Eivind Alexander Bergem
jxltom
Raghu
Damien Merenne
Matthew Skolaut