Note: This commit is based on the initial implementation by
Christer Ekholm (but stashed into one commit), with some adaptations
(forward porting, coding style and consistency fixes) by Uwe Hermann.
We want the size of the struct, not of a pointer to the struct. And to
be absolutely future proof, dereference the pointer we are assigning the
memory to (not the one we are copying the data from). Found by Coverity,
CID 50858.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The firmware has "on\n" and "off\n" commands since 1.10, so use them.
Apparently you can only set the state (on/off) of the load, but it's
not possible to query the current state.
Also note that the __ namespace is reserved by POSIX for its private
usage, so user land software should never rely on any kind of API
with a __ prefix.
For session sources without a file descriptor to poll a negative number
should be passed for the fd parameter. The hung-chang-dso-2100 driver
currently passes 0 instead, which is the stdin stream. Fix the issue by
passing -1 for the fd parameter.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Accept (and set to default) 0 for numchannels which means 'unlimited'.
I think it is convenient to read all channels of a vcd file by default.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Benefits:
* only channels really used in vcd will be added
* we can give them the proper name found in the vcd file
* less code :)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Current code moves the identifier string one byte to the front to
overwrite the bit value, so 'tokens[i]' is a string to compare against
the desired value. This copying is unnecessary, just pass a properly
setup pointer.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
No need to bail out on vectors. As long as there are tokens left, we can
try to parse the rest. Also, print a message so the user knows what's
going on. Here is a testcase vcd:
$timescale 1 ns $end
$var wire 1 n0 addr_0 $end
$var wire 1 n1 addr_1 $end
$enddefinitions $end
#0
0n0
b1 n1
#1
1n0
b0 n1
#2
0n0
b1 n1
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
If we hit the missing identifier case, then we reached the end of the
token list. So, we should break out of the loop, and not continue.
Otherwise we will go past the end of the array as this minimal testcase
shows:
$timescale 1 ns $end
$var wire 1 n0 addr_0 $end
$enddefinitions $end
1
gives:
$ ./sigrok-cli -I vcd -i no_mod.vcd -O vcd -o /tmp/o.vcd
Segmentation fault
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
A $var block can have an optional index item which looks like '[<sth>]'.
Parse it, too, and append it to the channel name.
This fixes bug #322. A first version was posted by Simon Richter. This
version is rebased and simplified.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
As we're downsampling, several record time stamps can match the specified
trigger time. For this reason, it's possible that several trigger packets
are sent when a file is loaded. This prevents the issue and sends a
trigger packet only on the first matching record.
src/hardware/lecroy-logicstudio/protocol.c: In function 'handle_fetch_samples_done':
src/hardware/lecroy-logicstudio/protocol.c:261:3: warning: passing argument 6 of 'libusb_fill_bulk_transfer' from incompatible pointer type
recv_bulk_transfer, (void *)sdi, USB_TIMEOUT_MS);
^
In file included from ./src/libsigrok-internal.h:31:0,
from src/hardware/lecroy-logicstudio/protocol.h:26,
from src/hardware/lecroy-logicstudio/protocol.c:23:
/home/uwe/sr_mingw/include/libusb-1.0/libusb.h:1546:20: note: expected 'libusb_transfer_cb_fn' but argument is of type 'void (*)(struct libusb_transfer *)'
static inline void libusb_fill_bulk_transfer(struct libusb_transfer *transfer,
^
src/hardware/lecroy-logicstudio/protocol.c: In function 'fetch_samples_async':
src/hardware/lecroy-logicstudio/protocol.c:314:4: warning: passing argument 6 of 'write_registers_async' from incompatible pointer type
handle_fetch_samples_done);
^
src/hardware/lecroy-logicstudio/protocol.c:200:12: note: expected 'libusb_transfer_cb_fn' but argument is of type 'void (*)(struct libusb_transfer *)'
static int write_registers_async(const struct sr_dev_inst *sdi,
^
src/hardware/lecroy-logicstudio/protocol.c: In function 'lls_start_acquisition':
src/hardware/lecroy-logicstudio/protocol.c:1122:3: warning: passing argument 6 of 'libusb_fill_interrupt_transfer' from incompatible pointer type
recv_intr_transfer, (void *) sdi, USB_TIMEOUT_MS);
^
In file included from ./src/libsigrok-internal.h:31:0,
from src/hardware/lecroy-logicstudio/protocol.h:26,
from src/hardware/lecroy-logicstudio/protocol.c:23:
/home/uwe/sr_mingw/include/libusb-1.0/libusb.h:1602:20: note: expected 'libusb_transfer_cb_fn' but argument is of type 'void (*)(struct libusb_transfer *)'
static inline void libusb_fill_interrupt_transfer(
^
There is no status bit for RMS. We know about RMS if certain modes are
active. So, drop this superfluous variable.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The primary display is the power factor, the secondary is the frequency.
This got mixed up, so change the order. We also need to fix the
conversion factor.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
is_power_apparent_power is index 0 of function 0x39, so it is better to
process it first and the later indices after that (we need to add
another one with a different patch later).
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Testing showed that AC current needs to be handled different from DC.
Note that ACA is still untested because of limited testing equipment.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
It was confusing to see the display value (5 digits) printed in debug
output as a float. Print it the same way as shown on the real device,
without comma, of course.
This also allows to simplify the code a little.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This g_close(), the only one in the whole code-base, would unnecessarily
raise the minimum glib version to 2.36.
Thanks to Daniel Glöckner for the report.
This fixes bug #724.
This function replaces the pattern of calling config_list() with
SR_CONF_DEVICE_OPTIONS to obtain a list of device options. Note
that this does not include the SR_CONF_{GET,SET,LIST} bitmask,
which is now retrieved for a specific key by calling
sr_dev_config_capabilties().
Refactor handling the size of modbus_devs, so it doesn't produce a build
warning and still allows the compiler to remove unused code.
This fixes bug #637. It could be reverted once modbus_devs
unconditionally has a member in the struct.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
In some situations, the reply to the *IDN? command contains an
additional trailing 0x01 byte for unknown reasons.
This issue seems to be reproducible by changing the voltage using the knobs
on the device, then turning on the output and turning it off again.
The next korad-kaxxxxp scan() operation would contain the trailing 0x01
byte, which would lead to the detection of the device in libsigrok no
longer working until the next power-cycle.
Work around this issue by treating both the ID string with and without
the trailing 0x01 byte as valid.
This is a desperate measure to improve the success rate of device
initialization even after it got into a bad state. Combine this
with a reduced USB timeout (1 second) so that if it fails, it fails
quickly. Also ignore USB errors from the initial dummy read of the
device test ID.
Detect whether the FX2 firmware of the LWLA device exhibits the
short transfer bug. If so, work around the problem by limiting
reads to at most 64 bytes at a time. This slows down the memory
read after acquisition quite noticably, but makes the device
usable even in adverse conditions.
Reduce the number of long registers read in bulk during status
polling from 10 to 5. The LWLA1034 driver used to do that already
in an earlier iteration, which was then changed to be more like
the original vendor software. The reason for bringing it back now
is that it reduces the response size to 40 bytes, which works
around the spurious 64 byte limit bug in the FX2 firmware of the
LWLA devices.
The sr_input_dev_inst_get API documentation guarantees an input is fully
initialized as soon as the device instance is returned. An sdi
implementation should not set sdi_ready any earlier.
This fixes parts of bug #387.
The sixth character from ISET? is read and discarded. If the device is
turned off and on again, this won't be there and causes 10 ms delay in
every ISET? Luckily, this value isn't queried that often. To get the
sixth byte, the *IDN? command has to be issued before ISET?.
==18779== 800,000 bytes in 196 blocks are definitely lost in loss record 29 of 29
==18779== at 0x4C29110: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==18779== by 0x4E635C3: receive (analog.c:319)
==18779== by 0x40870B: datafeed_in (session.c:316)
==18779== by 0x4E59D4E: sr_session_send (session.c:1201)
==18779== by 0x4E59F8B: sr_session_send (session.c:1159)
==18779== by 0x4E62595: send_chunk (wav.c:234)
==18779== by 0x4E62A06: process_buffer (wav.c:290)
==18779== by 0x40954A: load_input_file_module (input.c:123)
==18779== by 0x4097AB: load_input_file (input.c:157)
==18779== by 0x40531E: main (main.c:288)
==17549== 32 (16 direct, 16 indirect) bytes in 1 blocks are definitely lost in loss record 22 of 39
==17549== at 0x4C29110: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==17549== by 0x5359200: g_malloc (in /usr/lib64/libglib-2.0.so.0.4200.2)
==17549== by 0x536EE2D: g_slice_alloc (in /usr/lib64/libglib-2.0.so.0.4200.2)
==17549== by 0x5370165: g_slist_append (in /usr/lib64/libglib-2.0.so.0.4200.2)
==17549== by 0x4E595C3: sr_session_datafeed_callback_add (session.c:512)
==17549== by 0x409527: load_input_file_module (input.c:111)
==17549== by 0x4097AB: load_input_file (input.c:157)
==17549== by 0x40531E: main (main.c:288)
==7478== Invalid write of size 8
==7478== at 0x4E59182: sr_session_dev_remove_all (session.c:302)
==7478== by 0x4E591CD: sr_session_destroy (session.c:265)
==7478== by 0x4095D9: load_input_file_module (input.c:143)
==7478== by 0x4097AB: load_input_file (input.c:157)
==7478== by 0x40531E: main (main.c:288)
==7478== Address 0x7877eb8 is 88 bytes inside a block of size 96 free'd
==7478== at 0x4C2A37C: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==7478== by 0x4E5F454: sr_input_free (input.c:573)
==7478== by 0x4095C3: load_input_file_module (input.c:140)
==7478== by 0x4097AB: load_input_file (input.c:157)
==7478== by 0x40531E: main (main.c:288)
Do not use size_t for values whose width is defined by the device,
not the host. Also don't use size_t for simple indices with known
small range, unless type compatibility considerations apply.
Refactor the sysclk-lwla driver to separate the generic logic from
the model-specific implementation. Based on this, implement support
for the SysClk LWLA1016 device.
On some systems it can happen that the USB 'bus' number is a lot larger
than 64, but sr_usb_find() currently errors out if it is > 64.
Example:
Bus 250 Device 006: ID 1ab1:04ce 1ab1 DS1000Z Series[...]
Increase that limit so that the code will work everywhere. This bus number
is queried via libusb_get_bus_number() which returns an uint8_t, so we're
limiting to 255 here.
Thanks to 'ssi' on IRC for reporting the issue.
Apparently (some versions of) Mac OS X have the same problem with
usb_get_port_path() as FreeBSD does. Work around this in the same way.
Thanks to hanyazou@gmail.com for the patch!
This fixes bug #673.
The driver should now be able to cope with e.g. multiple ChronoVu LA8
and/or ChronoVu LA16 devices being connected to the same PC.
It now also provides the serial number and connection ID, which can be
used by frontends to differentiate multiple devices.
Also improve the scanopts / drvopts / devopts lists handling.
This fixes bug #504.
With the current driver API and the corresponding session event
handling, it is not possible to destroy and then re-create an
event source with the same key within the same main loop iteration.
The next generation driver API will fix this problem. But for now,
just change the driver to make do without that sort of thing. Also
increase the I/O timeout to 100 ms to be safer in the event of all
kind of delays the OS environment may induce.
This fixes bug #678.
Evaluate all 64 bit of the duration field in the capture status
record. Although unlikely in practical use, due to compression
it is possible for the duration in ms to exceed 32 bit.
zip_discard() was introduced in libzip 0.11, which some systems
do not have yet. Provide a fallback replacement for zip_discard(),
and reduce the requirement to libzip 0.10 again.
This fixes bug #674.
During initialization of the LWLA1034, read the 64-bit test word
twice and verify the result of the second read only. This better
matches what the original vendor software does.
Apparently, these four registers form an interface for indirect
access to another internal 64 bit wide memory. This is likely the
same memory as that accessed by the bulk transfer commands 7 and 8.
Added support for SR_CONF_REGULATION which returns value for CH1
Also VELLEMAN LABPS3005D (only device currently supported) sends single
'M' character in beginning of return value, which is specially discarded.
Trying to configure an invalid capture ratio would reset the
previously configured value. Instead, we should just reject the
new value and keep the original one.
Soeren Apel
Uwe Hermann
Martin Ling
Chriter
Alexandru Gagniuc
Wolfram Sang
Aurelien Jacobs
Lars-Peter Clausen
Daniel Elstner
Martin Ling
Stefan Brüns
Tilman Sauerbeck
Hannu Vuolasaho
Petteri Aimonen
Matthieu Gaillet
jry
Bert Vermeulen