- Slightly change the info text in the dialog. Add a definition of exactly what it means to "rescue" a component.
- Reload the project libraries when a project is opened, even if kicad is already running and the same project is open (to be sure the lib cache is up to date).
- Set the Modified flag on cancel, because a change has indeed been made (choosing not to rescue is equivalent to updating the components)
* Components with multiple "converts" were rendered with all of them overlapping instead
of just one.
* Schematics missing a -cache.lib resulted in unnecessary renaming suggestions.
* The dialog title "Conflicts Checking" is inaccurate now (as we're checking for more than
just conflicts) and also somewhat awkward, unidiomatic GUI English; I renamed it to
"Project Rescue Helper".
* Eliminate modal annotation warning dialog when generating a netlist fails
due to components that are not annotated.
* Add warning message to annotate dialog.
Fix also an issue on Windows, when using the footprint viewer or the component viewer in modal mode:
Reason: these frames (when run under the Kicad manager) have the Kicad manager as parent, and were built with wxFRAME_FLOAT_ON_PARENT style.
On windows, when the frame with style wxFRAME_FLOAT_ON_PARENT is displayed its parent frame is brought to the foreground, on the top of the calling frame.
and stays displayed when closing the frame in modal mode.
This issue does not happen on unix so we use now wxSTAY_ON_TOP on Windows, and wxFRAME_FLOAT_ON_PARENT on unix to simulate a dialog called by ShowModal.
This is not perfect, but at least it works.
* Change 'Silent mode' -> 'Always ask for confirmation'. Default on
(Same behavior as before, though arguably, it is very annoying and
should probably be default off)
* 'Automatically close dialog' -> 'Keep this dialog open'. Also changed
the default to _not_ keep the dialog open (what is keeping it open even
useful for ?)
* Change leave sheet hot key from back space to alt + back space. Note: for
some reason ctrl + back space did not work at least on windows.
* Add back space as delete node hot key which is consistent with the delete
track segment hot key in Pcbnew.
Now all are calculated using the top to bottom draw Y axis. This is perhaps not a good idea, but at least it will be easy to change, later.
Code cleaning relative to these bounding boxes.
* If a bus entry is drawn between two WIRES (not a wire and a bus, or two
buses), it looks like it's connecting the wires together, but doesn't
actually represent a connection. Display them as dangling in that case,
to make it clear to the user that a connection has not actually been made.
* Enable and disable save schematic button and menu entry depending on
modification status.
* Add toolbar and menu entries for leaving sheet.
* Enable and disable leave sheet menu entry and toolbar when in root sheet
or descended into the hierarchy.
* Add code to test for sheet path recursion to SCH_SHEET_PATH and SCH_SHEET_LIST.
* Add recursion tests to edit sheet code in Eeschema.
* Add recursion tests to block paste code in Eeschema.
* Remove global s_NetObjectslist.
* Separate out non-owning version of NETLIST_OBJECTS_LIST into NETLIST_OBJECTS.
* Fix double free pertaining to ~NETLIST_READER().
* Remove all file-io from CvPCB.
* Remove exe launcher cvpcb, retain only cvpcb.kiface, since cvpcb.kiface has no file i/o.
* Add void CVPCB_MAINFRAME::KiwayMailIn( KIWAY_EXPRESS& mail ) and teach it to use old
netlist loading code with a STRING_LINE_READER LINE_READER.
* Fix BEGIN_EVENT_TABLE( CVPCB_MAINFRAME, KIWAY_PLAYER )
Previously, acute angles (especially small angles) in zone outlines create incorrect shapes and sometimes strange shapes for clearance areas, when using generic algorithms.
This happens when zones outlines have "spikes", but not usually for smooth outlines.
* auto-save was broken for all sub sheets with are in a sub-directory of the project directory. (reason wxFileName::Normalize(), used to create the absolute path has issues with filenames starting by '$', perhaps due to env var which also start by $). the auto-save prefix is modified ( now AUTOSAVE_PREFIX_FILENAME which defines "_save_" ) and defined only once.
* auto-save files from sub-sheets were not found due to the fact the path was not set (fixed by Blair Bonnet's patch)
added the example gen_gerber_and_drill_files_board.py in demos, which shows how to do that.
Fix a Printf format issue (shown in Debug mode) in Libedit (%d used for a size_t, changed in %zu)
Fix a i18n issue in field names when loading a component, if the language was changed during a session, and kicad not restarted (see Bug #1448654).
However changing the language needs restarting kicad, in order to have all messages or menus translated.
* Add code to test if any of the components in the schematic cache have been changed
in the component libraries.
* Prompt user to accept or reject components when changes are found.
* If the user chooses to use the components in the cache, create a new library with the old
components and add it to the beginning of the component library list so the schematic will
not be changed.
* Create dialogs to handle user feedback and status.
* Use "Close" in the file menu of every main frame window instead of the
mismatch of the terms "Close", "Exit", and "Quit".
* Change the terminology in the Pcbnew graphic text edit dialog to match the
module text edit dialog.
* Improve the layout of the Pcbnew graphic text dialog.
* Fix some wxPrintf parameter type assertions for 64 bit time_t.
* Fix all (at least I think I got all of them) duplicate menu accelerator
characters.
Now these parameters are stored in user config, not project config ( they are not really related to a given project, they are just a setup during an edition),
and the schematic editor and the component editor have now separate parameters, because they are separate editors with different constraints.
component editor: repeat pin enhancement (from and idea of Edward Johns)
Previously, only the lib named "power" was used (and therefore power parts defined in other libs not shown).
Now, all power parts can be loaded from any library.
Also, when loading power parts from the chose component dialog or the lib viewer, libs and parts are filtered: only power parts and libs containing power parts are listed.
Hotkeys: move a few global strings in the files where ther are actually used (and make them local.) and code cleaning.
Fix a few other minor issues.
* The SCH_COLLECTOR m_foundItems was being obsoleted after a pin name search.
If a library edit changed the found pin name, the cache still held the now
missing library pin and would segfault on next search due to the cache being
out of date.
This is due to the fact static strings flagged translated ( _("string") notation) are not translated when they are static only if they are not inside a dll.
When they are static inside a dll, the dictionary is already loaded, and the constructor translate them.
Therefore they can be translated twice in dialogs are calling wxGetTranslation to show them, if the application is run from kicad.
But if the application is run as stand alone, the translation is made only once (as expected).
Fix minor 3D viewer issues (includling change number of segments and its optimization to draw pad holes.)
Fix Bug #1439132 (track and via list on toolbar not always refresh after loading a board).
Remove useless tool in Modedit.
* Add footprint and drop table from the Pcbnew footprint library table menu
entry to make it clear to new users.
* Add component to the Eeschema library configuration menu entry.
legacy plugin: better compatibility with old brd files (current track width and current vias size, stored in SETUP section, were not read from file and incorrectly set)
Eeschema now uses dashed lines for graphic lines (to be consistent with plot functions and toolbal icon).
Fix an old bug in some envionments which warp the mouse on a bad monitor when opening eeschema, pcbnew and some other windows, only noticeable guys who are lucky enough to have more than one monitor.
Move items rework: enhancements: for some items (sheets, components, bus entries) the mouse cursor is no more wrapped to the anchor. For large symbols, this is better: they are more easy to place.
There is also a change when starting a move item command: the full screen is redraw, and therefore there is no artifact due to the XOR draw mode.
Some other minor coverity fixes (uninitialized members).
* move not shared files (sch_item_struct.*, sch_base_frame.h) to eeschema;
* move wxEeschemaStruct.h to eeschema and rename it schframe.h to be consistent with the other corresponding file name schframe.cpp;
* remove few not needed #include
Rename eeschema/dialogs/dialog_sch_find.fbp to dialog_schematic_find_base.fbp, to be consistent with other dialogs.
Pcbnew run from the project manager: add menu Save Copy As..., which is the same command as Save As ... in stand alone mode, but with the constraints of a project (no cwd change, no board filename change, and keep project settings)
- the net file now has all project sheet title block using node 'sheets' and 'sheet'
- Updated bom_with_title_block_2_csv. Note, its only going to output the root title block.
- corrected the code that violated the code policy. i.e. added the extra space to make the code more readable
- Restored bom2csv.xsl to its original form
- Added bom_with_title_block_2_csv.xsl which has the new BOM generator.
For example:
- Company name
- Project title
- issue date
- Revision
- Comment 1 to 4
- updated bom2csv.xsl plugin to take advatage of the extra project information that the net file now outputs.
Overall this improvement will make it easier to automatically make controlled and traceable documents.
* Fix -Woverloaded-virtual warning in DIALOG_LIB_NEW_COMPONENT class
definition.
* Make EDA_ITEM::Matches( const wxString& wxFindReplaceData& ) protected
since it's a helper function that should only be called by derived objects.
* Check to see if image handler is already initialized to prevent warning
on debug builds.
* Change LIB_PART destructor message output to use wxLogDebug for debugging
on windows builds.
* Minor code cleaning and coding policy fixes.
* if the current select plugin is the github plugin, one can select some of these libraries and add them to the table
* if the current select plugin is the kicad plugin, one can select some of these libraries and download them to make alocal copy.
They can added to the table after they are downloaded.
* Make generate button the default in Eeschema netlist dialog.
* Fix spacing issues in export IDF dialog.
* Make OK button the default in export IDF dialog.
* Remove unnecessary end dialog code from export IDF dialog.
* Improve resizing of export IDF dialog.
* Change Read to Load in Pcbnew and Eeschema preference menus.
* Make electrical rules check status bar message the same for both the menu
and toolbar entries.
When the filename is not absolute, the page layout file is now searched first in project folder, and then in kicad template folder, if not found in project.
Fix issue when using a page layout file in project folder: eeschema and Pcbnew did not use it, unless using an absolute path.
Now, if the file path is nor absolute, it is seen as relative to the project (which is the expected behavior)
fp lib wizard: when pcbnew id compiled with USE_GITHUB_PLUGIN=OFF, the github plugin option is no more accessible (and the web viewer no more used).
BOM dialog: remove a not very useful button, and merge its function with an other (not perfect, need more work)
Add message box to show info added in BOM python scripts (See scripts/bom-in-python/README-bom.txt about this info)
* Make title capitalization consistant.
* Replace some instances of module with footprint.
* Use angle instead of orientation where appropriate.
* Remove abbreviations where it made sense.
* Coding policy fixes.
* Fix assertions in Eeschema when editing net labels, electronic rules check,
and plotting.
* Fix assertion when opening PCB calculator.
* Fix assertions in Pcbnew when changing footprints in footprint properties
dialog and adding or editing text.
steps to better support devices with precise scrolling deltas (trackpads).
Scrolling is done in the handler rather than creating and firing cmd events.
This is intended to support two-finger scrolling on the Magic Trackpad.
- Added a preference, 'Use mousewheel to pan', to allow panning by default
on mousewheel events. This reverses the existing behavior where unmodified
mousewheel zooms and Shift/Cmd modified pans.
The old behavior was:
- Unmodified scrollwheel performed zoom in/out
- Shift modified scrollwheel performed pan up/down
- Cmd modified scrollwheel performed pan left/right
- Shift+Cmd modified scrollwheel performed zoom in/out
with no cursor warp
With the new preference checked, this changes to:
- Unmodified scrollwheel performs pan up/down
- Shift modified scrollwheel performs pan left/right
- Cmd modified scrollwheel performs zoom in/out
- Shift+Cmd modified scrollwheel performs zoom in/out
with no cursor warp
With the preference unchecked, this is now:
- Unmodified scrollwheel performed zoom in/out
- Shift modified scrollwheel performed pan left/right
- Cmd modified scrollwheel performed pan up/down
- Shift+Cmd modified scrollwheel performed zoom in/out
with no cursor warp
It should be noted that for the last case, the behavior has changed.
This is not arbitrary. This now matches expected behavior for an OS X
application. This also matches what wxWidgets expects on this platform
as wxWidgets changes the axis of mousewheel events to horizontal when
the event is shift-modified.
The preference is added everwhere that mouse preferences previously
existed, i.e., eeschema, pcbnew and gerbview. The 3D Viewer does
not yet honor this preference, but behaves as if it was checked.
The pl_editor does not currently have any preferences to honor.
As with the magnify event support, this covers canvases for all
current tools, EDA_DRAW_PANEL, EDA_3D_CANVAS and EDA_DRAW_PANEL_GAL.
This does NOT modify the behavior of mousewheel zooming, though it
probably should. This remains unsuitable for use with a trackpad,
use pinch-to-zoom instead.
* Make all files generated by make_lexer() dependencies of thier respective build targets.
* Make building Boost a dependency for all libraries.
* Remove duplicate make_lexer() call for Specctra lexer files.
Rename "Switch highcontrast" to "Toggle High Contrast".
Eliminate most of the abbreviated hotkey titles.
Doxygenize dialog_hotkeys_editor.h and add missing license block.
Display <unassigned> if key code is 0 (NULL).
Refactor hotkey editor to use tab control instead of one giant list.
Each tab is a separate hotkey section.
Modify EDA_HOTKEY_CONFIG to change the m_Comment member to m_Title for a new purpose.
We want a pretty title in the hotkey editor. We use m_Title for the key export comment which
still conveys the purpose just as easily.
Refactored usage of wxGrid into wxListCtrl which allows capturing navigation characters
and also works better (single selection is built in).
Add hotkey overwrite prompts that are paired with "Common" section. It will check if a hotkey
overlaps with the proper sections. i.e. Common with the all other sections; or Section 1 with just Common.
Right-click menu removed due to wxListCtrl being able to catch the special keys properly.
* Include new field template editor
- Removes 10 template limitation
- Adds ability to set default value
- Adds ability to set default visibility
* Documentation to follow
* Tested in Linux (Ubuntu 14.04) + Windows, Windows has issue with displaying highlight for selected template, fix to follow
* Use the proper verb Annotate in the Annotate dialog for the action button
* Used the proper verb Generate in the Netlist dialog for the action button
* Fix ERC dialog title to be "Electrical Rules Checker".
* Fix all usages of "Erc" to "ERC" consistently in ERC dialog.
* Move action buttons to bottom of ERC dialog and change Del Markers to
Delete Markers.
* Add tooltips to ERC options matrix buttons to indicate their current state.
* Cleanup ERC options code that for some reason decided to delete the button
and recreate it instead of just updating it's bitmap directly.
* Rename "Test ERC" to "Run" to describe what it's actually doing properly
* Fix creation of single app bundle with respect to scripting support.
* Cleanup scripting search paths for OSX.
* Fix some small CMake bugs from previous OSX build change.
* Optimize bundle file structure to be consistent with Apple specs.
* Add helper script for compiling wxWidgets and wxPython
* Update OSX build instructions.
Fix dialog title to be "Electrical Rules Checker" to match everywhere else.
Fix all usages of "Erc" to "ERC" consistently.
Move action buttons to bottom of dialog, make Del Markers actually say Delete Markers.
Add tooltips to ERC options matrix buttons to indicate what their current state is, for newb friendliness.
Cleanup ERC options code that for some reason decided to delete the button and recreate it instead of just updating it's bitmap directly.
Rename "Test Erc" to "Run" because you are running ERC and not testing it.
Fix improper usage of SetLabel on a wxTextCtrl instead of SetValue so the ERC totals now work!
* Compile all binaries into a single application bundle.
* Use CMake BundleUtilities to make application bundle relocatable.
* Restructure build output to directly create an image file.
* Fix default search paths.
* Set KIGITHUB environment variable.
* Added patch to fix wxWidgets so names for OSX.
Schematic component properties dialog: add 2 helper buttons to manage the chip name (name of the corresponding part in lib)
- a browse button to chose an other chip name
- a test button, to know if the part exists. If not existing, list the parts found when searching using a case insensitive comparison.
However to be compatible with old versions of Eeschema, when a search in library fails, a case insensitive search is made.
Therefore, this version should be compatible with sch files created by previous Eeschema versions compiled with KICAD_KEEPCASE = OFF
* Add hot key handled return indicator to DRAW_FRAME::GeneralControl() and
DRAW_FRAME::OnHotKey() and all classed derived from DRAW_FRAME.
* Add code to all GeneralControl() and OnHotKey() functions to return true if
hot key was handled.
* Call event skip in DRAW_PANEL::OnKeyEvent() when key event is not handled to
allow default menu event handler to function properly.
* Fix Eeschema back annotation bug where footprint field visibility setting was ignored.
* Replace two confusing and ambiguous dialogs with a simple single choice dialog.
Ensure some values initialized by the schematic editor and used by libedit are also initialized in libedit even if the schematic editor was not started.
Remove useless commands (save/load project config) in libedit, because now they have no sense.
This fixes Bug #1360219 (Lost settings in eeschema) and keep separation between code relative to lib management and code relative to preferences.
2 or 3 minor settings could be lost in some designs, but they are very easy to reenter.
* Refresh canvas when user cancels edits so that the discarded sheet is
cleared from the schematic.
* Add file name validation to the sheet properties dialog to prevent
illegal file name characters from being entered into the text control.
* Rename FOOTPRINT_NAME_VALIDATOR to FILE_NAME_CHAR_VALIDATOR for clarity.
* Use clockwise and counterclockwise in menu strings which is less ambiguous than + and -.
* Moved the rotate hot key R to the rotate clockwise menu entry string.
* Patch Boost interlocked.hpp from version 1.56.
* Fix segfault in Eeschema when auto save event occurs before root sheet is initialized.
* Add assertion when SCH_SHEET_PATH::BuildSheetList is called with NULL pointer.
*) When kicad.exe closes a project, close any open KIFACEs so that they cannot
get disassociated from their true PROJECT.
*) Allow loading eeschema library editor from kicad.exe
*) Allow loading pcbnew library editor from kicad.exe
*) Rename LIB_COMPONENT to LIB_PART.
*) Add class PART_LIBS, and PART_LIB.
*) Make PART_LIBS non-global, i.e. PROJECT specific.
*) Implement "data on demand" for PART_LIBS
*) Implement "data on demand" for schematic SEARCH_STACK.
*) Use RSTRINGs to retain eeschema editor's notion of last library and part being edited.
*) Get rid of library search on every SCH_COMPONENT::Draw() call, instead use
a weak pointer.
*) Remove all chdir() calls so projects don't need to be CWD.
*) Romove APPEND support from OpenProjectFiles().
*) Make OpenProjectFiles() robust, even for creating new projects.
*) Load EESCHEMA colors in the KIWAY::OnKiwayStart() rather in window open,
and save them in the .eeschema config file, not in the project file.
*) Fix bug with wxDir() while accessing protected dirs in kicad.exe
*) Consolidate template copying into PROJECT class, not in kicad.exe source.
*) Generally untangle eeschema, making its libraries not global but rather
held in the PROJECT.
2) LIB_RECTANGLE and related classes sscanf data read from a file using "%s"
without field limits, which can cause problems with malformed/really long
inputs.
3) If some of the optional fields in a lib line are missing, "tmp" can remain
uninitialized.
Remove a minor warning message in Debug mode for 2 dialogs.
Pcbnew: update Gerber X2 file format (File Attribute) to very last X2 specification
Eeschema: Fix a minor bug in block selection (sometimes the last selected component was select instead of items in selected area)
and better drag behavior when draging an item by the drag hotkey.
Also fix incorrect backannotation when footprint names contain spaces (put spaces in names is always a bad idea)
* Fix minor Bug #1349058 Choose component dialog: Search field loses focus after entering a character and internationalize the dialog.
* Fix a subtle bug which prevent eeschema to read the project config file when launched from kicad manager, and when kicad.pro is not found.
2) Change from legacy Cu stack to counting down from top=(F_Cu or 0).
The old Cu stack required knowing the count of Cu layers to make
sense of the layer number when converting to many exported file types.
The new Cu stack is more commonly used, although ours still gives
B_Cu a fixed number.
3) Introduce class LSET and enum LAYER_ID.
4) Change *.kicad_pcb file format version to 4 from 3.
5) Change fixed names Inner1_Cu-Inner14_Cu to In1_Cu-In30_Cu and their
meanings are typically flipped.
6) Moved the #define LAYER_N_* stuff into legacy_plugin.cpp where they
can die a quiet death, and switch to enum LAYER_ID symbols throughout.
7) Removed the LEGACY_PLUGIN::Save() and FootprintSave() functions.
You will need to convert to the format immediately, *.kicad_pcb and
*.kicad_mod (=pretty) since legacy format was never going to know
about 32 Cu layers and additional technical layers and the reversed Cu
stack.
They are now member of EDA_DRAW_FRAME.
This change could fix Bug #1330781 (Background color change in Eeschema affects background color in Pcbnew)
Show page limits has meaning only for the schematic editor, the board editor and the page layout editor.
Draw background color selection exists only in eeschema and page layout editor.
In pcbnew, only a black background is allowed.
A side effect is now the user should set the background color in schematic editor, and the library editor (2 different options).
The default is still the white color.
- Refactored the common part of cursor key movement and crosshair update
in the various GeneralControl
- Add x10 movement with the keyboard (CTRL modifier)
- Avoid fixup of the cursor position by dummy mouse movements generated
by cursor warping (original analysis and idea Chris Gibson)
- Do key handling in a way to permit sub-pixel cursor movement
Change class PROJECT to use a generalized wxString in place of the
RETAINED_PATH items, so that new session and project specific strings
of any purpose can be saved there, for the life of a session.
Fix ( workaround only) crash (Windows only) when a quasi modal frame (like footprint viewer) was called from a dialog (like the component properties dialog in schematic editor).
Very minor other fixes.
- Better shape to the 60617 pin markers
- Made the markers' size proportional to the pin text
- Added the missing implementation in the pin plot routines
*) Eeschema can now show the footprint editor.
*) Eeschema can now invoke the footprint picker from the library part field editor.
*) KIWAY_PLAYER::ShowModal() takes aResultantFocusWindow that tells what window
to give the focus to. Required since frames are often near the top of the
hierarchy and they are invoked by a peer, not a parent.
*) KIWAY_PLAYER::IsModal() is now a retained state, controlled by SetModal()
*) Fully re-work the KIWAY_PLAYER::ShowModal() to use a nested event loop.
*) Add support to DIALOG_SHIM for a "quasi-modal" dialog presentation and mode.
See top of dialog_shim.cpp about that for benefits and need.
*) You can now pick footprint from the schematic component field dialog, although
if you do this before you open the BOARD, you will only get the global footprint
libraries, not also the project specific ones. Opening the BOARD first avoids this
problem.
This is the first example of cross KIFACE invocation, it is also the first
instance of using a TOP_FRAME other than FRAME_PCB as the first thing. It works,
but it's missing support for opening the project specific table because
historically the FRAME_PCB did that. This is now starting to expose all the near
term needs for KIWAY_PLAYER <-> PROJECT interaction, independence and out of
sequence usage.
A fix for this will be coming in a few days.
However it mostly starts to show why the KIWAY is terribly useful and important.
*) Rework the set language support, simplify it by using KIWAY. Now any major
frame with a "change language" menu can change the language for all KIWAY_PLAYERs
in the whole KIWAY. Multiple KIWAYs are not supported yet.
*) Simplify "modal wxFrame" support, and add that support exclusively to
KIWAY_PLAYER where it is inherited by all derivatives. The function
KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.
*) Remove the requirements and assumptions that the wxFrame hierarchy always
had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
and editors. This is no longer the case, nor required.
*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
quickly. It also gives control to the KIWAY as to frame hierarchical
relationships.
*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
the single KIWAY_PLAYER, see bullet immediately above.
*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
gives the KIFACEs a chance to save their final configuration dope to disk.
*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
these modal frames are distinctly different than their non-modal equivalents.
KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
so this is another important reason for having a dedicated FRAME_T for each
modal wxFrame.
On balance, more lines were deleted than were added to achieve all this.
- Converted the Next/Prev C casts to static casts and removed the type
unsafe ones
- Splitted as virtual the VIA::Flip member instead of using RTTI
- Heavily refactored the 'unconnected track' cleanup routine
- Misc constification
SVG plot, fix a missing reinitialization in plot lines, which could define a filled polyline, instead of a simple polyline
(these fixes solve Bug #1313084 )
*) void KIWAY::ExpressMail( FRAME_T aDestination, MAIL_T aCommand, const std::string& aPayload, wxWindow* aSource=NULL );
*) virtual void KiwayMailIn( KIWAY_EXPRESS& aEvent );
*) enum MAIL_T expansion into the brave new world if cross KIWAY_PLAYER communications.
Let the KIWAY_PLAYING begin.....
through well conceived mail from one KIWAY_PLAYER to another.
Get thinking now. Add a new MAIL_T value, then send ExpressMail(),
and receive it in KiwayMailIn(), it's that easy.
Eeschema, Pcbnew, and Cvpcb all run under the same process now,
FOR THE VERY FIRST TIME!
*) Added KIWAY::PlayerCreate(), PlayerClose(), and PlayersClose().
*) Factored FRAME_T into <frame_type.h> from ID_DRAWFRAME_TYPE.
*) Found that the following command line is helpful for collecting all the *.kiface
files into the <build>/kicad/ directory so that kicad can find them.
$ cp `find . -name '*.kiface'` kicad/
Maybe somebody will want to rework how the CMake files are organized so all
the binaries can go into the same place. See python-a-mingw-us.
*) This might fix the problem on the Mac where child process windows were not
coming to the front. See ->Raise() in kicad/mainframe.cpp.
*) You can set USE_KIFACE to 0 in kicad/mainframe.cpp to chain load child exes
instead of using the KIFACE modules directly, i.e. revert.
if it is running under single_top.cpp or under a project manager.
*) Test Kiface().IsSingle() when adding menus, some operations are not permitted
when running under a project manager and the KIWAY_PLAYER is pegged to a
specific project.
*) Implemented KIWAY::KiFACE() so it loads *.kiface files. They still have to be
in the same directory as the main *.exe launcher, so this presents some difficulty
when the binaries are not yet installed but rather the *.kiface files are still
in their original build directories. For today, I simply copied _pcbnew.kiface
to build/kicad/.
*) Add a test case to kicad/mainframe.cpp just to get an early peek at loading
_pcbnew.kiface under the C++ project manager. Got that working for one
specific invocation just for proof of concept. Surprise, it works.
was used locally. Then comment it out in favor of a newer strategy for
filling in nicknames in cvpcb.
Add MODULE* FootprintLoadWithOptionalNickname( const FPID& aFootprintId )
throw( IO_ERROR, PARSE_ERROR );
from code found elsewhere.
In PATCH_COMMAND, use patch instead of bzr patch if patch or patch.exe is found (mandatory to use msys2 because bzr patch does not work when using msys2)
! The initial testing of this commit should be done using a Debug build so that
all the wxASSERT()s are enabled. Also, be sure and keep enabled the
USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it
off is senseless anyways. If you want stable code, go back to a prior version,
the one tagged with "stable".
* Relocate all functionality out of the wxApp derivative into more finely
targeted purposes:
a) DLL/DSO specific
b) PROJECT specific
c) EXE or process specific
d) configuration file specific data
e) configuration file manipulations functions.
All of this functionality was blended into an extremely large wxApp derivative
and that was incompatible with the desire to support multiple concurrently
loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
An amazing amount of organization come from simply sorting each bit of
functionality into the proper box.
* Switch to wxConfigBase from wxConfig everywhere except instantiation.
* Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
PGM_SINGLE_TOP,
* Remove "Return" prefix on many function names.
* Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
* Fix building boost for use in a DSO on linux.
* Remove some of the assumptions in the CMakeLists.txt files that windows had
to be the host platform when building windows binaries.
* Reduce the number of wxStrings being constructed at program load time via
static construction.
* Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
these functions are useful even when the wxConfigBase comes from another
source, as is the case in the KICAD_MANAGER_FRAME.
* Move the setting of the KIPRJMOD environment variable into class PROJECT,
so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
* Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
its child wxFrames and wxDialogs now have a Kiway() member function which
returns a KIWAY& that that window tree branch is in support of. This is like
wxWindows DNA in that child windows get this member with proper value at time
of construction.
* Anticipate some of the needs for milestones B) and C) and make code
adjustments now in an effort to reduce work in those milestones.
* No testing has been done for python scripting, since milestone C) has that
being largely reworked and re-thought-out.
* getpart.cpp: fix a potential bug on a translatable string with has requirements in spelling.
* fix bug #1066179
* kicad: fix erroneous labels in sub menus.
* Pressing 'Enter' while the focus is in the tree did not work due to the
double-click wxWidgets workaround. Make it work.
* More clearly document what is happening and how it can be tested.
* Fix string concatenation for _( "Unit" ) + wxT( " " ). This failed
compiling against wxWidgets 2.8 (thanks Cirilo Bernardo ).
* Base the indentation on a measured observation with explanation
(98%-ile of name-length found in library). The previously chosen 24
character indentation was too wide for most.
* Don't use a #define spilling into the global namespace, but use
a locally defined constant for COLUMN_DESCR_POS.
* Manually change fbp file minor version number so dialog could be edited
with latest release version of wxFormBuilder.
* Give component view panel more weight for improved component view size.
* Add padding around dialog button sizer.
* Improve component chooser redraw to fit in wxWidgets redraw strategies.
* Use LIB_COMPONENT::Draw and LIB_COMPONENT::GetBoundingBox for drawing the
component
* Make resize redrawing work properly.
* Allow to select units in components that have more than one right in the
component chooser dialog.
* Keep chosen unit in history.
* Show preview of current component unit as thumbnail image next to the
description box.
* Fixes lp:1280567
* make some more fields 'const' that can.
* Instead of previous/next _visible_ element, Go through
previous and next element. Otherwise the cursor stops moving
if the item is only partially visible.
Add a workaround to fix a new bug in wxWidgets 3.0 ( Windows specific ) which shows icons only with a size = 16x16 in menus which have attribute wxITEM_CHECK
Add missing calls to Show( false ) to some main frames (Kicad, eeschema, gerbview), to force config saving when closing these windows.
Code cleanup and minor coding style fixes in footprint_wizard_frame.
The desire is to migrate designs *away from* case independence, and to create
designs which use literally (case specific) interpreted component names. But for
backwards compatibility, you may turn OFF this option if you really must.
(Remember that with KiCad using text data files, typically you would be better
off simply doctoring those files into a case literal state with a text editor
and move forward into the brave new world of case specificity. Also, BOM
generators may not work properly when you have this option turned OFF, the xml
export's referential integrity is broken on library part name. Hence the default
is ON now, as of 29-Jan-2014.
Add missing calls to Show( false ) to some main frames (Kicad, eeschema, gerbview), to force config saving when closing these windows.
Code cleanup and minor coding style fixes in footprint_wizard_frame
Pcbnew: Code cleaning and bug fix in autoplace functions
Dialog exchange footprints has now a separate button to update the .cmp file, only on request.
* Replace all occurrences of the word "part" with "unit" when referring to
multiple unit components for improved consistency.
* Replace "shared by" with "common to" when referring to objects (lines, arcs,
pins, etc.) that are common to all units.
* Improve wording in library component properties dialog.
Eagle plugin: filter and replace not allowed chars in FPID(-':' and '/') by _ or -, if they are used in Eagle footprint names (otherwise, boards converted and saved under kicad_pcb format are not readable by Pcbnew).
* Fix replace bug to handle case sensitivity properly.
* Fix replace bug where the item index was getting updated incorrectly.
* Fix replace infinite loop bug on replace all.
* Make find/replace view update code a separate function.
* Rearrange find/replace trace string to add tracing to EDA_ITEM::Replace().
* Add IsComplexHierarchy method to SCH_SHEET_LIST for future find/replace
improvements.
* Create a generic yes/no/cancel dialog from DIALOG_EXIT.
* Make DIALOG_EXIT return wxID_YES instead of wxID_OK so it is consistent
with the standard message dialogs.
* Add missing license to confirm.h and confirm.cpp.
* Change Eeschema message dialog when loading a schematic if the current
schematic is modified to be more consistent with the exit dialog.
* Change Pcbnew message dialog when loading a board if the current board
is modified to be more consistent with the exit dialog.
* Remove some Eeschema block debug logging code left over from my last
commit.
* Merge HandleBlockEnd() and HandleBlockEndByPopUp() into as single block
end function HandleBlockEnd().
* Replace all instances of HandleBlockEndByPopUp() with HandleBlockEnd().
* Change block hot keys to send command events instead of directly calling
end block handler.
Remove KICAD_GOST option because it is now useless: the 2 GOST options are now selectable at run time and are:
* specific page layouts (now user definable, and the GOST page layouts are available in template folder)
* notation for multiple parts per package (made in eeschema, preference menu)
Enhancement in Excellon file reader: accept Feed Rate and Spindle Speed definitions in Tool information line (but does not use them)
Eeschema: better name for m_SheetList (changed to m_SheetPath) member of class NETLIST_OBJECT.
Fix an annoying issue about not named nets:
now, these nets are named from the component references and pin names which are connected.
therefore, unless the net or the footprint references are modified, the net name is not modified between 2 netlist calculations.
Pcbnew: better test for allowed layers when creating/editing Dimensions and some other Graphic items
Drc: fix comments and messages for some drc tests.
To do: fix issues in active layer selection when creating a track and layer pair selection dialog
* Use a regular expression to enforce more stringent bus label testing.
* Add validator to edit label dialog to prevent space character from being
used in labels.
dialogs which allow editing of component properties. The button
is active when the table row cursor is on the DATASHEET field only.
When active, and your datasheet is a URI, then your default
browser will be launced to show that datasheet if it can find it.
This incentivizes use of http:// links for datasheets.
was simply a pointer to an object on the display list. At times this object
would disappear from the display list, in the test case because of a concatonation
of two wires, and if you then tried to clone the non-existent object you'd get a
crash. This was not merely a bug, but a naive design choice. IMO.
Now the item to repeat is cloned, so will never also be on the display list.
*) add hotkey for setting the grid origin as 'S', in board editor, module editor.
*) re-position the function interface for cursor movement from BASE_SCREEN into
class EDA_DRAW_FRAME. This is a prelude to getting rid of BASE_SCREEN or
splitting it up.
* Force search when wrap past end of list option changes state.
* Fix SCH_FIELD::Matches() for bug in user defined fields which have an ID
of -1.
* Minor improvements to the find data names to improve source code readability.
sometimes, the modified flag was set for these components just when switching from a sheet to an other sheet.
Pcbnew: fix Bug #1197414 (dragged track segments does not show clearance area)
When KISYSMOD is not defined , in GetAllFiles, skip hidden directories
Gerbview: fix a collision name for GetLayout method.
Eeschema: fix potential crash when editing a pin electrical type (The user was able to enter a non existing type)
Remove dead code relative to old BOM generation.
Rename witha more explicit name bom-example?.py , fix some issues and move them from script/bom-in-python/ky to script/bom-in-python
Rename ki.py utility to more explicit ky_generic_netlist_reader.py
and various DIALOG classes called from top frames. See comments in
{eeschema,pcbnew}/invoke_a_dialog.h.
*) Move some dialog classes into *.cpp files from *.h files.
*) void SCH_EDIT_FRAME::OnErc( wxCommandEvent& event ) was opening the modeless
ERC dialog more than once if icon was clicked more than once.
*) Remove BOM stuff.
Eeschema, dialog netlist: fix a bug when removing a plugin panel, when is is not the last.
dialog netlist:Add a predefined command string for python scripts, when creating a new netlist plugin entry.
because under Linux and wxWidgets 2.9, wxStaticBoxSizer are very ugly (text not readable in this dialog)
(Does not happen with wxWidgets 2.8)
Eeschema hotkeys: remove duplicate keys in key editor.
File "rules" has instructional text as comments near top.
2) Convert all text files in repo to LF line ending form.
Any checkout done with "rules" in play will convert the working
tree to native line ending, while keeping repo as LF line ending.
* Fix a bug when full file name and path are passed to FOOTPRINT_INFO::
ReadFootprintFiles() which I created in bug fix lp:593989.
* Fix a wxString debug assertion in EDA_APP::InitEDA_Appl() when the KICAD
environment variable is defined as an empty string.
* Add error dialog when libraries cannot be found in system search path
when loading footprint using the select footprint dialog.
* Add footprint library name column to the EDA_LIST_DIALOG when selecting
footprints from the list.
* Allow reading all columns from the selected row in EDA_LIST_DIALOG.
* Remove redundant sort from EDA_LIST_DIALOG constructor
* Add library name member variable and accessors to FOOTPRINT_INFO.
* Make headers translatable for Eeschema select component from list dialog.
* Add some helper methods to FPID for identifying the FPID type and validity.
* Remove a bunch of trailing whitespace and add missing license comments.
(explanation: float is implicitly promoted to double anyway, it's only useful
for storage; also a fp variable forces conversion of other int in the expression
without needing a cast)
Typo fixes in some comments 'floatting' -> 'floating' :D
The plan goes like this:
- eeschema still uses int in decidegrees
- all the other things internally use double in decidegrees (or radians
in temporaries)
- in pcbnew UI the unit is *still* int in decidegrees
The idea is to have better precision everywhere while keeping the user with int i
angles. Hopefully, if a fractional angle doesn't come in from the outside, everything
should *look* like an integer angle (unless I forgot something and it broke)
When the time comes, simply updating the UI for allowing doubles from the user should
be enough to get arbitrary angles in pcbnew.
- Removed spurious int casts (these are truncated anyway and will break
doubles)
- Applied the Distance, GetLineLength, EuclideanNorm, DEG2RAD, RAD2DEG
ArcTangente and NORMALIZE* functions where possible
- ArcTangente now returns double and handles the 0,0 case like atan2, so
it's no longer necessary to check for it before calling
- Small functions in trigo moved as inline
In most case the assignment to null was not necessary since it was easily provable that the (local) variable wouldn't have referenced after that anyway.
* Tweak the NETLIST_READER code to allow for component footprint names that
are not found in any library to generate a warning instead of an error and
update the board accordingly.
* Don't display undo warning in netlist dialog when dry run option selected.
* Rename netlist_reader_common.cpp to netlist_reader.cpp
* Rename netlist_reader_firstformat.cpp to legacy_netlist_reader.cpp
* Rename netlist_reader_kicad.cpp to kicad_netlist_reader.cpp
* Remove cvpcb/read_write_cmpfile.cpp and move the single function it
contained into cvframe.cpp
* Remove cvpcb/loadcmp.cpp and move the single function it contained into
class_DisplayFootprintsFrame.cpp.
* Remove cvpcb/readschematicnetlist.cpp and move the single function it
contained into cvframe.cpp.
* Remove cvpcb/setvisu.cpp and move the few functions it contained into
the appropriate source file.
* Create separate NETLIST object to hold contents of netlist files.
* Read entire netlist and footprint link files before making applying
changes to board.
* Add BOARD::ReplaceNetlist() function to eliminate the calls between the
NETLIST_READER, PCB_EDIT_FRAME, and BOARD objects.
* Change placement of new components below the center of the current board
or in the center of the page if the BOARD is empty.
* Add dry run option to netlist dialog to print changes to message control
without making changes.
* Add button to netlist dialog to allow saving contents of message control
to a file.
* Eliminate the need to compile netlist_reader_*.cpp in both CvPcb and Pcbnew.
* Add netlist_reader_*.cpp to the pcbcommon library.
* Remove redundant load component link file code from CvPcb.
* Modify CvPcb new to work with the new NETLIST_READER object.
* Add compare() function and < and == operators to FPID object.
* Add REPORTER class to hide an underlying string writing implementation for
use in low level objects. Thank you Dick for the idea.
* Lots of minor coding policy, Doxygen comment, and missing license fixes.
a CSV file for Libre Office or Open Office. It is very easy to use. You can specify it as a plugin for
Eeshema netlist generator.
It searches for all field names, generates the table headings accounting for all fields found in any part.
Then stuffs all the parts rows according to proper fields.
Depending on build options seems that wx uses different types for size() so the Format string was not always correct. Put a fat warning in a comment too.
the spurious warning about stuff that couldn't be seen when changing
colours.
NOTE that the 'net name' layer is present and configurable but non used
anywhere!
Pcbnew, layer manager: add option (popup menu) to always keep copper layers not visible but the active layer, even when the active layer is changed.
Usefull for multilayer ( more than 4 layers) PCBs.
In particular the new mechanism for handling extended color palettes is in place,
included renaming the ini keys and saving the color name instead of its index; this means better forward compatibility with palette changes.
Since ini keys are changed, colors will be reset
* Complete encapsulation of the MODULE class.
* Complete encapsulation of the EDA_TEXT class.
* Encapsulate most of the ZONE_CONTAINER class.
* Add pcbcommon library as a dependency for reSWIGging the scripting
support. This should cover most dependency cases.
* Make Pcbnew net list dialog honor escape key on Linux.
* Make Pcbnew swap layers dialog honor escape key on Linux.
* Layout and UI policy fixes for Pcbnew swap layer and net list dialogs.
* Layout and UI policy fixes for Eeschema plot dialog.
* Rename fpip.h to fpid.h.
* Fix FPID class compiler errors.
* Restore fpid.cpp to Pcbnew static library source list.
the crosshair after zooming.
This method is only used when the ALT key is held while using the mousewheel or
if it's permanently enabled in the options dialog next to the middle mouse
button panning option.
* Improve the stable and testing build version option logic.
* Use CMake FindPythonInterp to configure the Python interpreter.
* Use Python interpreter to determine the system Python module install
path if not already defined on the command line.
* Add header symbol checks for asinh(), acosh(), and atanh().
* Add test source to check for isinf() which can be defined as a C++template.
* Replace conditional compile on windows systems for aXXXh() with CMake
configuration tests.
* A few minor MSVC compile fixes.
* Fix incorrect python environment string in fixswigimports.py
* Create a separate document for KiCad CMake build options.
* Create a separate how to compile KiCad on Windows document.
Pcbnew: in netlist dialog: The user now can choose between the netlist and the .cmp file to import footprints names.
Therfore no need to delete the .cmp file when exists to use only the netlist.
This is useful for users who use CvPcb only once to fill footprints fields in schematic, and after edit/modify the footprints fields in schematic outside CvPcb.
* Improve MSG_PANEL_ITEM to handle message panel information.
* Create containers for passing message panel items between objects and
the message panel.
* Rename EDA_ITEM::DisplayInfo to EDA_ITEM::GetMsgPanelInfo.
* Remove all direct manipulation of EDA_DRAW_FRAME from all objects derived
from EDA_ITEM.
Use wxFormBuilder to create EDA_LIST_DIALOG_BASE, like other dialogs.
Minor code cleanup (remove unused functions and coding style fixes) and minor bug fixes.
Pcbnew: Drc dialog: fix a old very minor bug.
Added: single click on an item in marker list moves the board graphic cursor on the corresponding marker location on the board
Double clicking is not modified.
Library Browser tool, you have to select it in the components listbox
and then press the "Insert component into schematic" button to close the
window and return to the schematic.
The attached patch enables the selection and insertion of a component in
schematic by double clicking on it in the Library Browser component
listbox. As the double clicking should have effect only if the Library
Browser was launched to load a component in schematic, the patch checks
for NULL the m_Semaphore variable, used two distinguish the mode in
which the Library Browser is running (modal, used when inserting a
component in schematic, or non-modal).
* remove useless spaces in csv bom file format.
* remove KICAD_GOST conditionnal compilation and merge KICAD_GOST code with the "normal" code.
* Csv file format created by KICAD_GOST code is now available for everybody through the BOM dialog options (as it should).
* fix coding style issues.
This required the additional compiler command line option "-std=c++0x".
2) Switch to unique_ptr from auto_ptr which is C++ deprecated.
3) Change to new English layer names per mailing list discussion, see class_board.cpp.
4) When saving to *.kicad_pcb or *.kicad_mod, identify opportunities to use wildcard
layer sets, for pads so far.
5) Switch to two std::string hashtables in pcb_parser.cpp, away from one wxString based one
for layer names and layer sets mapping. One hashtable holds the mask, the other the index.
Layer sets are only in the mask table.
6) Move "LOCALE_IO toggle" into PCB_IO::Format() since it is a public API function and
caller should find it as convenient as possible to use. LOCALE_IO should handle
nesting OK in the case where public Format() is called from one of the Footprint*()
functions.
7) Drop support for "export module to new library". Creating new libraries will have to
be handled in concert with library table entries, and we've talked recently about
creating a better footprint library manager, one that resides in a DLL/DSO. So
this kind of functionality needs to be handled in there in the near future.
8) Change name of exported PCB_IO module/footprint to *.kicad_mod and not *.emp.
clean duplicate code.
Simplify HPGL dialog: plot offet removed and replace by only one option (plot origin to center of sheet or not)
This is surely enought.
Mainly to plot drill maps, but can be used to plot boards, for documentation.
The print svg still exists, but the plot SVG has more options (mirroring, holes in pads),
however print svg allows color print, and full board printing, and plot does not.
therefore tracks which have a end point inside a pad, but not necessaryexactly to the pad position are seen as connected, and are no more removed.
Side effect: reconnect to pads option is removed, because it is useless.
TODO: use this algorithm in drag functions.
Minor other fixes
Kicad manager: shows now svg files in tree files.
Pcbnew: fix incorrect printing (board out of page) when creating drill map in postscript format ( noticeable mainly for small boards)
* serious code cleanup (remove duplicate code)
* shows (option in 3D preference menu) the copper items (tracks, zones...) in 3D, using 35 microns copper thickness.
However, because there are a lot more3D data to show (roughly 4 times more), this is slower.
All: press ctrl+shift key when moving the mouse allows the graphic cursor to be moved outside the grid.
(useful to place graphic objects, texts in any position, regardless the current grid)
* Add s-expression file parser object and keyword files.
* Fix minor issues with s-expression file formatting.
* Fix a minor bug the zone container fill state parsing in the legacy plugin.
* Move EDA_TEXT visibility definition to eda_text.h.
* Add minor BOARD_ITEM object improvements to support s-expression file
parser.
fix a compil warning.
CvPcb: fix regressions :
Shows now a void field instead of the dummy footprint name $nonane (whenthere is no footprint selected in netlist).
The active footprint selection changes only if a new component is selected from the component file,
and does not change just when the next component is automatically selected, after a footprint selection.
Speed up delete association and auto associe.
Eeschema (also Libedit and Libview) starts always to the default grid (50 mils)
Gerbview starts with the last selected grid, but the validity is tested.
In Pcbnew the grid value is always displayed, so it should always be good.
Delete LEGACY_PLUGIN cache after deleting library of same name.
Remove automatically generted freerouter help header.
Add Normalize() to BOX2.
Clamp some values in the virtual space of drawframe.cpp
Should allow Pcbnew code easier to change and Gerbview code more understandable and easier to maintain.
Code cleaning (remove dead code, add comments).
Minor other enhancements.
Other scaling factors (MILS_TO_IU_SCALING_FACTOR and DECIMILS_TO_IU_SCALING_FACTOR)
also defined only in convert_to_biu.h.
Allows different scaling value for Gerbview.
Needs more tests.
// This provides better project control over rounding to int from double
// than wxRound() did. This scheme provides better logging in Debug builds
// and it provides for compile time calculation of constants.
#include <stdio.h>
#include <assert.h>
#include <limits.h>
//-----<KiROUND KIT>------------------------------------------------------------
/**
* KiROUND
* rounds a floating point number to an int using
* "round halfway cases away from zero".
* In Debug build an assert fires if will not fit into an int.
*/
#if defined( DEBUG )
// DEBUG: a macro to capture line and file, then calls this inline
static inline int KiRound( double v, int line, const char* filename )
{
v = v < 0 ? v - 0.5 : v + 0.5;
if( v > INT_MAX + 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' > 0 ' for int\n", __FUNCTION__, filename, line, v );
}
else if( v < INT_MIN - 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' < 0 ' for int\n", __FUNCTION__, filename, line, v );
}
return int( v );
}
#define KiROUND( v ) KiRound( v, __LINE__, __FILE__ )
#else
// RELEASE: a macro so compile can pre-compute constants.
#define KiROUND( v ) int( (v) < 0 ? (v) - 0.5 : (v) + 0.5 )
#endif
//-----</KiROUND KIT>-----------------------------------------------------------
// Only a macro is compile time calculated, an inline function causes a static constructor
// in a situation like this.
// Therefore the Release build is best done with a MACRO not an inline function.
int Computed = KiROUND( 14.3 * 8 );
int main( int argc, char** argv )
{
for( double d = double(INT_MAX)-1; d < double(INT_MAX)+8; d += 2.0 )
{
int i = KiROUND( d );
printf( "t: %d %.16g\n", i, d );
}
return 0;
}
*) for footprint access into *.mod files and
*) BOARD save/load
The item_io.cpp and ioascii.cpp have been set off to the side for reference
as *.notused, for awhile.
The CMake options USE_NEW_PCBNEW_LOAD and USE_NEW_PCBNEW_SAVE are gone,
this is now the mandatory usage of the LEGACY_PLUGIN. This should reduce
code maintenance for awhile until the s-expression plugin comes into
play. But at least for legacy format, there is not two code bodies
to maintain any more.
A new LEGACY_PLUGIN footprint library caching scheme is in place which
needs some testing. It should not be any faster, but might give better
results in a networked environment if there is *.mod files on the server.
* Remove internal units from BASE_SCREEN and it's derivatives.
* Remove internal units from EDA_DRAW_FRAME and it's derivatives.
* Use build time code to replace internal units conversions.
* Fix scaling bug in page layout sample window that I created in my
last commit.
* Move all convert from user to internal units into base_units.cpp.
* Remove internal units parameters from all moved conversion functions.
* Revise all source code that calls the moved conversion functions.
* Remove internal units from all dialog text control helper classes.
* Move all convert from internal to user units functions into separate file.
* Remove internal units parameter from all moved conversion functions.
* Revise all source code that calls the moved conversion functions.
* Compile these conversion routines separately for the appropriate pcb or
schematic internal units.
* Move internal units specific status bar update code into the appropriate
application for updating the status bar.
* Move millimeter user units rounding function to common.cpp.
* Move EDA_TEXT object into separate header and source file.
* Compile EDA_TEXT class separately for BOARD_ITEM and SCH_ITEM units.
* Compile PAGE_INFO class separately for BOARD_ITEM and SCH_ITEM units.
* Minor formatting tweaks to Pcbnew s-expression file.
* Move internal unit formatting functions into BOARD_ITEM and SCH_ITEM.
* Add s-expression Format() function to all objects derived from
BOARD_ITEM.
* Add s-expression Format() function to base objects as required.
* Add functions to convert coordinates from base internal units
(nanometers) to millimeter string for writing to s-expression
file.
* Add temporary dummy conversion functions to prevent link errors
until schematic and board object and action code can be separated
into DSO/DLL.
* Add CMake build option to build Pcbnew with nanometer internal
units.
Eeschema: one string with a bad char (\a, not useable in internationalized strings).
Dialog_page_settings: use not translated strings in code, so strings can be freely translated for the UI.
(Initial code was not working with existing translations)
Update 2 icons.
* BLOCK_SELECTOR class is not longer derived from EDA_ITEM.
* Encapsulate BLOCK_SELECTOR class member variables and add access methods.
* Move HandleBlockBegin() function from block_commande.cpp to drawframe.cpp.
* Remove virtual methods from top level derived objects per future
coding policy change.
* Remove Doxygen copydoc statement from objects derived from EDA_ITEM
since the comments are automatically copied to the derived object.
* Removed copy and pasted Doxygen comments from objects derived from
EDA_ITEM.
issue in cast to wxRect fixed (EDA_RECT accepts negative size, but not wxRect, so the wxRectcast is normalized now).
This fixes some bugs.
A minor other bug fix in Pcbnew.
subclass DIALOG_SHIM support.
Tried dialog_drc but it has nesting problems due to use of DRCLISTBOX, which
needs to be put into its own header file to untangle.
This works, but in my version of wxformbuilder there is a bug which does not properly show the
subclass property, even though it is still in play. This happens after saving then loading the *.fbp file.
So it is a nuisance bug, but does not affect functionality.
* All objects derived from EDA_ITEM now have consistent hit test method
definitions.
* Remove double function calls from all classes derived from SCH_ITEM.
* Lots of Doxygen comment fixes.
* make 2 bitmaps more visible.
* fix incorrect screen redraw when rotating a component.
* netlist : the pcbnew advanced format can be now stored (persistant option) in project config.
Pcbnew:
* graphic_item_properties_base.fbp * dialog pad edit: make some strings more easier to translate.
* global pad edition: fix a bug that change pad position instead of pad size (round pas only).
Eeschema:
* fix a bug: new created wires were not alwaes shows until the screen was redrawn.
wxWidgets 2.9 knows wxSVGFILEDC device context.
Unfortunately, arcs are drawn as pies (this is a feature, not a bug).
This is not correct for Kicad.
So Kicad has its own wxSVGFILEDC (named KicadSVGFileDC) that is basically the same as wxSVGFILEDC,
but with arcs drawn as arcs, not pies.
Note also under wxWidgets 2.8 does not know wxSVGFILEDC , so kicad had already its own SVG device context.
* Convert Eeschema from manually linked list to DLIST for storing
SCH_ITEM objects.
* Add helper functions to SCH_SCREEN for appending list of SCH_ITEM
objects.
* Fix bug in wire editing code for accurate undo/redo behavior.
* Add member to DLIST to append another DLIST.
* Other minor code cleaning.
* Pcbnew: in hight contrast mode the 'V' hotkey did not always refresh the screen.
* Eeschema: incorrect print scale when the option 'Show page limits' is disable.
Eeschema: Viewlib is now accessible from Libedit (to browse libs or load a component to edit)
Libedit: uses now the same dialog as the schematic editor to load a component
Some code cleaning.
Design rules: increase number of vias and tracks sizes
Pcbnew: netlist reader: change from my recent commits to keep netnames in pads for footprints not in netlist
(allow an user to place some footprints by hand, set pads netnames and do not lost these netnames when loading a netlsit)
Fix other very minor issues.
the match between wxString::Format() or wxString::Printf() format strings
with passed arguments, but does this at runtime, not compile time.
Fix some mismatches. size_t is a 64 bit type on x86_64 whereas int and
unsigned are 32 bit types. On 32 bit machines they are all 32 bits so
this error is probably not triggered.
* Eeschema can generate this netlist format.
* Pcbnew can use (automatic identification) the current format or the new format.
* Cvpcb does not use yet the new format.
* Enhance class PLUGIN's comments to improve their value as instructional.
* Switch #includes from "file.h" to <file.h>, and fiddle with search paths
by using include_directories(BEFORE ...)
* dialog_page_settings did not have symmetrical space on its right border.
And it now remembers it last position and size within a program session.
* base_screen.cpp is now compiled twice, once for {pcbnew,cvpcb} and once
for eeschema, in preparation for "compile time" support of internal units
rather than "runtime" support.
sizes. Tested with postscript output only. Required minor file format changes
to reflect the "portrait" setting. common/dialogs/dialog_page_settings.cpp
uses a checkbox but its name is "Landscape", which is inverted from portrait,
but since it is the more common choice, I used that rather than portrait.
The tooltip for that checkbox makes it clear. No portrait mode is supported
for "User" paper size.
* Remove unnecessary copy constructors from schematic and component
library objects.
* Add comment to class definitions where the default copy constructor
generated by the compiler was adequate.
* Add assignment operator to EDA_ITEM, SCH_ITEM, and all schematic
objects where the default assignment operator generated by the
compiler would not be adequate.
* Move SCH_ITEM::Place() code into SCH_EDIT_FRAME so schematic item
objects no longer have any knowledge of the schematic frame window
or undo/redo containers.
note: the Module editor save it with default orientation and layer, but the archive function does not, so some footprints can be not editable.
TODO: modify the Archive Function to use the default layer / orientation.
* EDA_DRAW_PANEL completely encapsulated.
* Moved OSX m_overlay member from EDA_DRAW_PANEL to EDA_DRAW_FRAME where
it is used.
* Doxygen comment warning fixes.
* Add check box and flag to ignore replacing the component reference
designator field.
* Fix a resizing bug when switching between the find and replace modes of
the find/replace dialog.
* Fix replace component reference designator field bug.
* Force rebuild of search list when schematic is modified and the replace
dialog is closed.
* Prevent finding the next item when the find/replace dialog is closed.
* Respect warp mouse pointer setting when closing find/replace dialog.
* Fix duplicate mnemonic control accelerator keys in find/replace dialog.
* EDA_DRAW_FRAME completely encapsulated except for DrawFrame member.
* Moved members specific to Pcbnew from EDA_DRAW_FRAME to PCB_BASE_FRAME
or PCB_EDIT_FRAME as appropriate.
* Replace EDA_TOOLBAR with wxAuiToolBar as EDA_TOOL bar provided no
additional functionality and made code less readable.
* Remove EDA_TOOLBAR class definition from wxstruct.h and delete file
wineda_toolbar.cpp.
* Rename tool bar members to something more descriptive since the
horizontal and vertical references wont mean anything once the
tool bars are movable.
* Lots of dead code removal.
* changed all the RotatePoint() functions in trigo.{h,cpp} to take a double as the
angle, which is still in tenths of degrees for now.
* EDA_TEXT::m_Orient is now double, still in tenths of degrees (for a short while),
but the double means parsing files and saving them use a different format string.
++pcbnew
* DRAWSEGMENT::GetStart() and GetEnd() do not operate for S_ARC like they used to.
They are now simply accessors for m_Start and m_End. Use DRAWSEGMENT::GetArcStart()
and GetArcEnd() and GetCenter() for arcs. specctra_export.cpp was the only
source file dependent on the old behavior.
* DIMENSION::m_Text is now contained, not dynamically allocated.
* more kicad_plugin work.
* Enable replace toolbar button and menu entry.
* Improve find replace logging granularity.
* Fix find and replace dialog control hiding and disabling.
* Minor improvements to the SCH_FIND_REPLACE_DATA object.
* Move find collector list iterator into the collector object.
* Add visibility override flag to EDA_ITEM to temporarily show items that
are hidden during find and replace.
In common.cpp GetTimeStamp is renamed GetNewTimeStamp (a better name).
Pcbnew: prepare work to calculate connections between pads that inteserct and therefore can be connected without any track (composite pads).
* Removed Pcb_Frame argument from BOARD() constructor, since it precludes
having a BOARD being edited by more than one editor, it was a bad design.
And this meant removing m_PcbFrame from BOARD.
* removed BOARD::SetWindowFrame(), and BOARD::m_PcbFrame
* Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp
* added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance
* a couple dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed,
such as dialog_mask_clearance, dialog_drc, etc.
* Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it
with build_version.h's #define BOARD_FILE_VERSION, although there may be a
better place for this constant.
* Made the public functions in PARAM_CFG_ARRAY be type const.
void SaveParam(..) const and void ReadParam(..) const
* PARAM_CFG_BASE now has virtual destructor since we have various way of
destroying the derived class and boost::ptr_vector must be told about this.
* Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use
an automatic PARAM_CFG_ARRAY which is on the stack.\
* PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array,
since it has to access the current BOARD and the BOARD can change.
Remember BOARD_DESIGN_SETTINGS are now in the BOARD.
* Made the m_BoundingBox member private, this was a brutally hard task,
and indicative of the lack of commitment to accessors and object oriented
design on the part of KiCad developers. We must do better.
Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox().
* Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()
* Replace Eeschema find code with a collector based implementation.
* Fixed a search bug when all subsequent searches of an item would ignore
the remaining valid child items when an item had more than one child
item that matched the search criteria.
* Add SCH_FIND_COLLECTOR class to find all items that meet the specified
search criteria.
* Add SCH_FIND_COLLECT0R_DATA to keep track of information for all matching
items.
* Use collector to iterate over the list of items that match the search
criteria rather than trying to start at the last matched item.
* Remove unused searching methods from sheet path and sheet path list
objects.
* Add replace and replace all functionality to Eeschema find dialog.
* Push matching methods down to EDA_ITEM class so they can be used by
other derived objects.
* Add method to EDA_ITEM to test if item supports replacing.
* Add flag to find/replace data to support replace feature.
* Disable wild card matching check box when dialog is in replace mode as
wild card replacement is not supported at this time.
* The usual Doxygen comment and coding policy fixes.
* Fix bug in hierarchical searches using sheet path pointers which are
destroyed on every search. Use human readable path as last sheet found
in test to prevent comparison of deleted pointers.
* Fix a bug in SCH_COMPONENT::Matches() that would prevent searching for
pins if the search all fields flags was not set.
* Fix a bug in SCH_COMPONENT::Matches() to use the sheet path to perform
the comparison to the correct reference designator and unit number.
* Fix wrapping in sheet path and sheet path list MatchNextItem methods.
* Push search methods down to EDA_ITEM object so advanced searching can
be performed on all items derived from EDA_ITEM.
* Add virtual method to EDA_ITEM object to test if item supports replacing
text.
* Replace switch statement magic numbers in Eeschema socket connection code
with Pcbnew for improved readability.
Fix bug 880132 (Justify not correct)
Note: justifications are now always relative to the text, in libedit (as before) and schematic editor:
if rotated, justification is rotated, because in Pcbnew rotation can have any value.
* Move the component library save file creation and write error dialogs
into the appropriate frame object.
* Change the save component library and document definitions take an
OUTPUTFORMATTER object instead of a file name.
* Change the component alias save document definition function to take
an OUTPUTFORMATTER object instead of a file handle.
* Replace C malloc() and free() functions with C++ new and delete
operators or the appropriate STL container.
* Add option to end mouse capture function to skip executing the end
mouse capture callback.
* Lots of coding policy and Doxygen comment goodness.
* Use version of DateAndTime that returns a wxString and delete the
version that takes a char* as it is no longer required.
* Merge StrNumICmp() and StrLenNumICmp() into StrLenNumCmp() to create a
single function for comparing strings with integers and remove a lot
of duplicate code.
* Remove unused strupper from string.cpp.
* Use wxArrayString for sorting the EDA_LIST_DIALOG contents.
* Modify algorithm to correctly calculate the virtual drawing size and
offset required to place the drawing correctly under all conditions.
* Ignore default wxWidgets scroll keys on Windows in EDA_DRAW_PANEL key
event handler.
jean-pierre charras
unknown
unknown
Jon Neal
Henner Zeller
Wayne Stambaugh
unknown
Tomasz Wlostowski
Martin d' Allens
Maciej Suminski
Maurice
unknown
unknown
Garth Corral
Ronald Sousa
John Beard
Alexander Golubev
Blair Bonnett
unknown
Bernhard Stegmaier
Brian Sidebotham
Lorenzo Marcantonio
Andrew Zonenberg
marco.
Marco Serantoni
Fabrizio Tappero
Cirilo Bernardo
maciej.
Povilas Kanapickas
Andrey Fedorushkov
Thiadmer Riemersma
Alexander Lunev
Stefan Helmert
Marco Mattila
Carl Poirier
Baranoviskiy Konstantin
Emmeran
Antia Puentes
Jacobo Aragunde Perez
Moses McKnight
Ryan Bunch
brian.
Jerry Jacobs
lajos kamocsay
Alexander Zakamaldin