5974446523
PNS: Let's make the r-tree work for us
...
I'm not sure where the magic number of "4x worst" came from, but it's
been around forever. This is extremely inefficient as it negates much
of the power of r-tree filtering in dense designs. If we really trusted
it, we could set this just to worstClearance. Keeping it above the worst
clearance by a little bit seems to provide enough of a speed improvement
to resolve the test cases I have, so I'll go with that for now.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7777
2021-04-17 21:37:11 -04:00
1d7e5a0443
Fix merge error that prevented a previous change from working
2021-04-14 23:30:16 -04:00
268d570941
PNS: keep last valid diff pair trace as current state
...
This allows fixing/committing what is on screen even if the current
cursor position doesn't have a valid solution (the old behavior
would result in the current trace disappearing)
2021-04-14 23:21:10 -04:00
c829dba88e
PNS: Reduce minimum distance to start turn in diff pair placer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8193
2021-04-14 23:21:10 -04:00
cac4d70154
PNS: Respect fix-all in diff pair placer
2021-04-14 23:21:10 -04:00
296a9df530
PNS: Pick up diff pair starting width from continuation track
2021-04-12 23:10:15 -04:00
1d9ca181a2
PNS: Use existing seg direction if both DP segs are parallel
2021-04-12 22:34:13 -04:00
311cde0984
Safety check suggested by Coverity
2021-04-12 20:42:50 -04:00
2aa5e568e8
Refactoring
2021-04-12 20:40:05 -04:00
73fb85a352
PNS: Calculate diff pair primitive orientation using anchors only
...
The previous method fails if the primitive is an expanding or
contracting pair (diagonals going inward or outward) resulting in
incorrect orientation, which then leads to incorrect candidate
gateways being generated and no solution found.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8185
2021-04-12 20:34:44 -04:00
715c61ac9f
PNS: Fix yet more arc edge cases
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8150
2021-04-12 19:59:55 -04:00
49a91414d7
PNS: Apply co-linear seg merging to drag operations
2021-04-11 22:32:11 -04:00
1c431d9929
PNS: Fix some off-by-one errors with arc dragging
2021-04-11 22:12:53 -04:00
a26fc6d65d
PNS: Fix several issues with arc dragging
...
Do not merge vertices that belong to different arcs
Fix start segment identification after arcs
Fix free-angle drag after arc
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8173
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8150
2021-04-11 17:56:40 -04:00
7ba110bd77
PNS: Fix dragging of segments with arcs in line
2021-04-11 10:18:57 -04:00
a30894e5a1
Allow SHAPE_LINE_CHAIN and SHAPE_ARC to be mirrored using a SEG
2021-04-11 13:27:25 +00:00
fe8fbf1d5d
Use arcs instead of line approximation for Miter shape
...
TODO:
* The resulting line chain is broken with the arcs, and
this appears to be some subsequent issue I was not able to pin down.
* The requirement of a correction factor is not clear to me
2021-04-11 13:27:25 +00:00
5c448057c8
PNS: Prevent state flicker when starting drag
2021-04-10 16:31:39 -04:00
7784d7cb12
PNS: Fix visible area restriction
...
VIEW::GetBoundary() returns the entire view area, not the visible area.
Surprisingly, we had no API for this, so I added one.
Also, changed the dragger behavior to toggle between optimizing just the
modified area and optimizing the visible area, i.e. we will now never
optimize off-screen portions of the dragged track.
2021-04-10 16:13:08 -04:00
94afdcb92a
PNS: Allow control of area-restricted drag optimization
...
CHANGED: The interactive router settings now include a switch to
enable or disable optimization of the entire dragged track,
which is now disabled by default. When enabled, the router
will reroute the entire track (from the dragged segment to
the closest pad/via in each direction) to be more optimal.
When disabled, only the area around the dragged segment
will be modified.
CHANGED: The "optimizer effort" slider is removed from the interactive
router settings dialog, as this setting did not have any
meaningful impact in most cases and was a source of confusion.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5918
2021-04-10 15:17:39 -04:00
dc0cf3b802
Clean up a confusing API.
...
AllowDRCViolations is kept in any mode as a *setting*, but only
controls router behaviour when the mode is mark obstacles.
Fixes https://gitlab.com/kicad/code/kicad/issues/7795
2021-04-10 11:08:02 +01:00
d878cbddbc
PNS: a few forgotten cleanup items
2021-04-07 23:34:45 -04:00
c9040a5c53
PNS: fix some weirdness identified by PVS
2021-04-07 23:16:56 -04:00
d4957b112e
PNS: Keep last valid drag solution in the node
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5450
2021-04-07 21:59:23 -04:00
26835f582c
Some situations require more than one dummy
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7820
2021-04-07 21:30:18 -04:00
9432484394
PNS: Find origin segment correctly when arcs are present
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8139
2021-04-07 20:28:30 -04:00
9f957d3e08
Fix crash when attempting to tune discontinuous lines
...
Also correctly find the tuning path through arcs
https://gitlab.com/kicad/code/kicad/-/issues/8131
2021-04-06 09:07:11 -04:00
b2f788adc1
PNS: Fix UseConnectedTrackWidth when starting from ARCs
2021-04-06 01:27:13 +00:00
e46c9d35ac
Add undo/redo handling to length tuner event loop
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8129
2021-04-05 19:58:14 -04:00
24cd174a23
Don't dereference a possibly-invalid optional
2021-04-05 19:34:57 -04:00
a6c3d74a73
Pass active layer to StartRouting in length tuner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7857
2021-04-04 21:51:54 -04:00
a24bc34b66
Better colors for length tuning popup in dark mode
2021-04-04 20:33:59 -04:00
c7ecb51f77
Update PNS length tuning algorithm to match the new BOARD algorithm
...
Now tracks inside pads are optimized to give a more accurate length.
Also, the start/end of the assembled line is used to identify the right
pad joints for pad-to-die length calculation.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4204
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1765
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6877
2021-04-04 20:27:22 -04:00
cdfb014ab6
CHANGED: Account for via height in track length calculations
2021-04-04 13:59:18 -04:00
6b24abac8f
PNS: Don't snap to end items if snapping is disabled by modifier key
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8033
2021-04-04 10:22:23 -04:00
a8896ebd73
Don't show leading ratline for unconnected net
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8040
2021-04-02 20:29:25 -04:00
f88d39b4f0
Fix state issue in router's switch layer handling.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7590
2021-04-01 18:10:04 +01:00
8cb6f15687
Warn when diff pair router can't start due to too-small-gap.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7795
2021-03-30 19:49:23 +01:00
78a60e9dfb
PNS: Put polygon error outside pad shapes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7672
2021-03-29 19:49:59 -04:00
6cbc3fb97d
Fix a minor inconsistency between router and DRC
...
Also make sure collision highlighting runs at the starting
location of a drag.
See: https://gitlab.com/kicad/code/kicad/-/issues/7672
2021-03-29 19:41:17 -04:00
8be9832153
PNS: Don't highlight Net 0 (the unconnected net)
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8040
2021-03-29 17:45:07 -04:00
132ec37b56
Handle arc in buildHullForPrimitiveShape
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8008
2021-03-25 21:25:30 -04:00
8be213e36f
Trim includes (and use consistent terminology in error messages).
2021-03-21 20:15:47 +00:00
5e0b65c3a8
Change wording of corner rounding action
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4505
2021-03-21 15:55:56 -04:00
cad1cb0262
Improve naming.
2021-03-16 12:07:06 +00:00
18037e2f65
Rework bitmap system to load from archived PNGs
...
Bitmaps are now identified by an enum class instead of by pointers.
Bitmap loading and caching is now handled by a class in common, and
we no longer compile most bitmaps into the binary, so there is no
longer a bitmaps static library.
Instead, bitmaps are archived to a .tar.gz file which is installed
in ${KICAD_DATA}/resources/images.tar.gz
The source PNGs are checked in to Git as the original CPP files were,
so that people can build without the required dependencies to convert
SVGs to PNGs.
Initial support is also added for dark theme icons, although this
is not yet exposed in the GUI.
Stubs are present for multi-resolution image resources, but this is
not fully-baked yet and could use some refinement.
2021-03-11 08:37:35 -05:00
720147d272
Remove transitive inclusion of bitmaps.h
2021-03-07 16:08:57 -05:00
df99ee39d9
PNS: new through vias should span all copper layers
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7576
2021-03-07 17:58:43 +00:00
79a9d69ff5
Coverity fixes for issues 314755, 316287, 324536, 324539, and 324539.
2021-03-02 08:10:37 -05:00
d06e8ef01c
Honour pre-defined-size selections for diff pairs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7759
2021-03-02 12:12:05 +00:00
d269778cd4
PNS: disable smart pads in walkaround if posture is forced
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7710
2021-02-27 13:48:01 -05:00
b36e1c741d
Fix insidious bug which resets layer of SOLID when marking collision.
...
It's supposed to be setting the layer of the collsion display object,
not the host object, but there's a typo.
Fixes https://gitlab.com/kicad/code/kicad/issues/7712
2021-02-25 23:39:48 +00:00
75032f3acd
Use the more-constrained layer when running rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7639
2021-02-25 22:58:07 +00:00
87ea540953
Fix whitespace errors
2021-02-25 17:18:23 +01:00
c79610e132
router: post-rebase fixes
2021-02-25 17:18:23 +01:00
6948cdd8ef
router: Fix return type within pointInside2
2021-02-25 17:18:23 +01:00
9bdfc13155
router: improve locality of post-shove optimization
...
Fixes : #4359
2021-02-25 17:18:23 +01:00
e1d4bb777c
router: use new LINE::Walkaround in the walkaround algo
2021-02-25 17:18:23 +01:00
045d02f818
router: add strict/loose area restriction constraint. WIP
2021-02-25 17:18:23 +01:00
24574aa2f5
router: first insert intersections, then build graph in Walkaround()
2021-02-25 17:18:23 +01:00
61e75a838b
router: replace large stack variables with std::array
2021-02-25 17:18:23 +01:00
028f209126
router: more robust LINE::Walkaround() implementation
2021-02-25 17:18:23 +01:00
e9c55cd0e3
router: if the drag anchor is not reachable by the mouse, use the closest point on dragged trace for optimizer restriction
...
Fixes : #4056
2021-02-25 17:18:23 +01:00
a141ed3444
router: feed view size change events to the router engine
2021-02-25 17:18:23 +01:00
12dfb541fc
router: expose current view area to the router algorithms so that the optimizer could know not to mess with traces/vias not currently visible to the user (wip)
2021-02-25 17:18:23 +01:00
2831c7d24c
router: fix compile error in DRAGGER
2021-02-25 17:18:23 +01:00
b67e5768a6
router: feature to save debug event log & board dump for easier recreation of router bugs and misbehaviours
2021-02-25 17:18:23 +01:00
ebdc68ac1d
router: correctly handle line width in PREVIEW_ITEMs
2021-02-25 17:18:23 +01:00
34c037684b
router: partially migrate SHOVE algorithm to use new DEBUG_DECORATOR
2021-02-25 17:18:23 +01:00
0e6cf3f56e
router: fix board edge clearance queries
...
Fixes : #7254
2021-02-25 17:18:23 +01:00
4574f52eac
router: DRAGGER::CurrentNode() should always return non-null value
2021-02-25 17:18:23 +01:00
e221b11e3b
GRID_HELPER: fixed arithmetic issue in segment snap distance check disguised as 'excessive optimization' by the dragger in the router
2021-02-25 17:18:23 +01:00
325300bd76
router: don't use compound pad shapes if pad contains a single primitive shape
2021-02-25 17:18:23 +01:00
a4bd2ad8c6
router: drag in walkaround mode now works
2021-02-25 17:18:23 +01:00
f84836f51e
router: factor out POSTURE_SOLVER to more generic MOUSE_TRAIL_TRACER class
2021-02-25 17:18:23 +01:00
af95235f47
router: report debug log events from DRAGGER
2021-02-25 17:18:23 +01:00
0306d16748
router: make post-drag optimization less intrusive
...
Fixes : #5918
2021-02-25 17:18:23 +01:00
14ce7a0ad7
router: implement area constraint in optimizer
2021-02-25 17:18:23 +01:00
64cf593ee9
router: debug points now have variable size
2021-02-25 17:18:23 +01:00
caa18c8e16
Fix bugs in diffPair hole-to-hole logic and add rule resolution.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7697
2021-02-25 14:23:02 +00:00
fa89263c8f
Push hole-to-hole min processing down a level.
...
Also removes adding the track width to the via gap, which was
never right.
Fixes https://gitlab.com/kicad/code/kicad/issues/7173
2021-02-24 21:42:00 +00:00
7f892669cc
Consistent punctuation.
2021-02-23 12:46:27 +00:00
c12666ec43
Fix arg type of NODE::followLine
2021-02-20 11:58:55 -05:00
6fce39607e
Fix return type within pointInside2
2021-02-20 11:58:55 -05:00
d0b91b1106
Router, place via: fix issue created by 45b2bc: cancelling via must be made
...
only when the select layer is called.
Fixes #7606
https://gitlab.com/kicad/code/kicad/issues/7606
2021-02-19 17:28:20 +01:00
54282dffe3
Move preview items using FP orientation
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7600
2021-02-18 16:32:40 -08:00
45b2bce698
Cancel placement of via if user cancels layer selection.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7578
2021-02-18 11:53:36 +00:00
5d2dc0b50e
Fix a few (minor) issues:
...
- Make DIALOG_SHIM::SetPosition working)
- rename PCB_BASE_FRAME::SelectLayer() to PCB_BASE_FRAME::SelectOneLayer()
- PCB_BASE_FRAME::SelectOneLayer(): make dismiss dialog by escape key working.
Fixes #7578
https://gitlab.com/kicad/code/kicad/issues/7578
2021-02-17 20:56:43 +01:00
0198d5a3bd
PNS: don't lose track of pad offset when dragging footprints
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7500
2021-02-16 19:47:52 -05:00
9212197c26
Grammar
2021-02-15 15:18:13 -08:00
e2f8b1a4b1
Interpreting wxDialog::ShowModal()'s retval as bool is never what you want.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7454
2021-02-08 17:40:57 +00:00
6272b48481
Make sure layer gets passed in to rules evaluation.
2021-02-08 14:53:49 +00:00
7aa7e3fd43
Push undo/redo blocking down a level in LengthTuner tool.
...
This way it's active only while tuning a single line, rather than
while the tool is selected.
Fixes https://gitlab.com/kicad/code/kicad/issues/7462
2021-02-08 14:15:46 +00:00
792904557e
Remember Parent data when routing
...
Keeps parent information such as UUID and pad removal options for
elements that are just updated in routing rather than created fresh or
fully destroyed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7460
2021-02-07 17:08:43 -08:00
721bf82603
Handle malformed lines in dragCornerInternal
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7398
2021-02-03 20:55:22 -05:00
d7ddc62d7e
Fix mouse warping and dialog placement for layer switcher.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2607
2021-02-02 17:20:01 +00:00
dc4b73fcef
Correct m_board check location in PNS_KICAD_IFACE_BASE::SyncWorld
2021-02-01 11:58:22 -05:00
73886aecb1
Ensure partially triangulated polys are not valid
...
Moves rule area triangulation outside of layer iterator and keeps the
triangulation_valid flag false until the triangulation has been
completed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7032
2021-01-29 16:33:57 -08:00
6a39b81647
Fix the last of broken Doxygen comment specifiers.
2021-01-27 17:39:44 -05:00
3e42ba18a9
Show dragging tools in context selection menu for components
...
Show the dragging tools in the context selection menu when a single
component is selected. Prevent the dragging tools from appearing when
more than one object is selected, as they will not activate anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/7258
2021-01-27 19:55:42 +00:00
b96bcc86b1
Don't restrict start item to same layer if snapping is enabled
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7276
2021-01-25 21:19:26 -05:00
3fcd0860c1
Make 'E' go straight to Custom Track Width dialog.
...
Also fixes some mouse capture issues.
Fixes https://gitlab.com/kicad/code/kicad/issues/7198
2021-01-20 18:19:55 +00:00
330d717c69
Fix typo
2021-01-18 21:50:26 -05:00
44655b98de
Initialize variables properly
2021-01-18 18:35:10 +00:00
68efdb2fff
Push shared parts of GRID_HELPERs into common.
2021-01-16 23:18:10 +00:00
02ccd5fbdb
Make sure properties commands don't go to other tools during routing.
...
Brings up the track widths (or diff pairs) context menu instead,
which seems to be the closest parallel.
Fixes https://gitlab.com/kicad/code/kicad/issues/7099
2021-01-14 15:19:09 +00:00
dc02ec9758
Remove a few const_cast
2021-01-12 20:51:31 +00:00
111fa99f9f
PNS: Use last-segment posture optimization always
...
Also when auto-posture is enabled, don't flutter
until area threshold has been met.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
2021-01-07 20:12:31 -05:00
6ca9a42251
Removes 3 other instances of a potential encoding problem
...
Signed-off-by: hoijui <hoijui.quaero@gmail.com>
2021-01-07 17:36:49 +00:00
e41c06304b
Don't show a leading ratline to a NPTH.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6960
2021-01-07 12:25:04 +00:00
f702b64b8d
Minor improvements to formatting & SNR.
2021-01-07 12:25:04 +00:00
0234b7278a
PNS: Make DIRECTION_45 North be up everywhere
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
2021-01-06 21:47:06 -05:00
46c4727783
Make MSVC happy again
2021-01-05 20:56:37 -05:00
e7b047660c
PNS: Correctly assemble lines with reversed arcs
2021-01-05 17:57:21 -05:00
feda03f69b
PNS: Fix arc orientation when assembling lines with backwards arcs
2021-01-05 17:57:21 -05:00
7431d5c985
PNS: First pass at updating meander placers for arcs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6464
2021-01-05 17:57:21 -05:00
8619086cf2
PNS: re-enable optimization of colinear segs in lines with arcs
2021-01-05 17:57:21 -05:00
8901e71fc8
PNS: Fix loop removal, make walkaround less broken for arcs
2021-01-05 17:57:21 -05:00
02cd8c99cd
Better error messages when routing can't be started.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6541
2021-01-05 18:47:58 +00:00
88d42724e6
Remove diff-pair-gap handling from single-line-router.
...
We can't really support it until we do min/max/opt shoving and
dragging.
Fixes https://gitlab.com/kicad/code/kicad/issues/6932
2021-01-05 16:54:52 +00:00
d975f2f6aa
Commenting and naming for clarity.
2021-01-05 16:54:52 +00:00
f7b20611c1
Enforce hole-to-hole min when placing diffpair vias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6931
2021-01-05 00:26:49 +00:00
93bd2171ab
Formatting.
2021-01-05 00:26:49 +00:00
d24b034cbc
Cleanup (and a minor performance improvement).
2021-01-04 22:32:29 +00:00
2ea6bc5529
Formatting.
2021-01-04 19:19:55 +00:00
648c42f643
Show collisions preventing routing from starting.
...
Also introduces a callback to the infobar so that the view can be
cleaned up when the timer expires.
Fixes https://gitlab.com/kicad/code/kicad/issues/6930
2021-01-04 19:19:55 +00:00
71215bcab3
Make sure TH pads get collision layer highlighted.
...
Also cleans it up to centralise all the decision-making.
Fixes https://gitlab.com/kicad/code/kicad/issues/6925
2021-01-03 21:16:09 +00:00
f01297fedd
Convert an annoying message box to an infobar
2021-01-02 22:14:10 -05:00
8b849b1c49
Fix several bugs in hull push-back with vias.
...
1) take hole plating thickness into account
2) build hulls specifically for via so pushing back to the hull doesn't
have to try and figure out how much extra to push back for the via
and/or hole
3) clear MK_HOLE flags when colliding with the pad itself so that we
don't get stuck in HOLE mode
4) move flag setting/clearing to updateNearest() so that it will keep
track of the state of the nearest collision
Fixes https://gitlab.com/kicad/code/kicad/issues/6913
2021-01-02 19:14:44 +00:00
13094fdc28
Formatting.
2021-01-02 18:38:17 +00:00
85e42890c4
Distinction between via and via hole probably not useful.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6913
2021-01-02 16:41:09 +00:00
068af7d328
When routing don't give NPTH holes a copper clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6903
2021-01-02 16:33:51 +00:00
eba7cb222c
PNS: Fix initial posture guess for pads
2021-01-02 10:32:15 -05:00
6b6694f55f
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6913
2021-01-02 15:04:30 +00:00
42c114f6ed
Record status of via dragging in Walkaround mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/3967
2021-01-02 00:31:02 +00:00
8a049cf290
Make sure bounding boxes get cached on rule areas.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6898
2021-01-01 23:17:49 +00:00
018c17399d
SNR.
2021-01-01 23:17:49 +00:00
fc1b0ec11f
Improve feedback when routing in highlight collisions mode.
...
In particular, when Allow DRC violations is NOT turned on and we
bump in to an obstacle.
2021-01-01 17:25:37 +00:00
3ba17e0a16
Formatting.
2021-01-01 01:02:06 +00:00
ecc0e861d3
Implement hole clearance and hole-to-hole clearance in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6882
2021-01-01 00:31:36 +00:00
5d8e6020d1
Improve clarity.
2021-01-01 00:31:36 +00:00
0e3c9de684
Formatting.
2021-01-01 00:31:36 +00:00
1b93663627
Formatting.
2021-01-01 00:31:36 +00:00
9a0f685a75
PNS: Consider arcs when searching for lines between joints
2020-12-31 13:05:43 -05:00
73248ab219
PNS: correct initial segment direction for posture solver
2020-12-31 13:05:43 -05:00
60fd7fdbb2
Fix comment
2020-12-30 18:52:56 -05:00
510db66f0e
PNS: Fix rollback for arc traces
...
PNS: Update posture solver after rollback
2020-12-30 18:23:24 -05:00
6105ac50da
ADDED: Default hotkey of CTRL+/ for switch corner rounding
2020-12-30 18:23:24 -05:00
b5b64a55ad
PNS: Only run optimization if lastNode is valid
2020-12-30 18:23:24 -05:00
79502a0d88
PNS: A new approach to arc placement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6334
2020-12-30 18:23:24 -05:00
bf9501e1d4
PNS: Fix auto-posture when placing via
2020-12-29 21:14:36 -05:00
689da3794d
PNS: Merge co-linear segments during placement
2020-12-29 21:14:36 -05:00
4c0aa6db1a
PNS: Disable smart pads optimization for vias
...
There is not much point with the current algorithm and it
breaks auto-posture.
2020-12-29 21:14:36 -05:00
81d4e06f00
PNS: Consider pad orientation when routing
...
PNS: Skip smart pads when posture was manually forced
This allows a more-correct pad breakout to be chosen when
smart pads is off.
2020-12-29 01:06:46 -05:00
96d49d1473
PNS: Improved auto-posture when starting from a segment
...
The previous auto-posture algorithm worked great for pads
but not so great when starting routing from a segment.
Now we can optimize the posture based on the starting
segment if one exists, to maximize the "obtuseness" of the
posture.
2020-12-28 23:51:13 -05:00
3adff647a7
PNS: Preserve nearest vertex when dragging in shove mode
2020-12-28 19:44:39 -05:00
be294dabce
PNS: Snap back to last valid point when committing a drag
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6651
2020-12-28 16:36:42 -05:00
3c87e67753
PNS: Allow committing routes even when cursor moves beyond valid solution
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6651
2020-12-27 17:14:38 -05:00
2cdf9875b9
PNS: fix off-by-one in dragCorner45
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6644
2020-12-27 15:58:36 -05:00
c615b7a49b
PNS: make initial direction behavior consistent with fix-all enabled
2020-12-27 15:21:55 -05:00
1c79e3174c
Pcbnew: Prevent footprint jumping when starting to drag it
...
CHANGED: When dragging a footprint, if the mouse isn't directly over the
footprint anchor when 'D' is pressed, the footprint center will jump to
the mouse position when dragging begins. This MR uses the current
mouse position instead of the footprint anchor as the inital reference
point when starting to drag.
Fixes https://gitlab.com/kicad/code/kicad/issues/6813
2020-12-27 17:43:52 +00:00
8ad89ae457
PNS: fix manual posture mode
2020-12-24 17:31:54 -05:00
8a2667c4c3
PNS: Fix all segments by default (and make optional)
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5920
2020-12-23 21:55:43 -05:00
8c247fc97c
PNS: Add a setting to disable posture solver
...
PNS: Prevent autoposture flutter when trail has little area
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6797
2020-12-23 21:02:17 -05:00
912657dd23
Component dragger: make relaxed segment pickup work for PTH pads
2020-12-22 22:43:44 -05:00
70c6314c67
Component dragger: be more generous about picking up tracks
...
We now pick up tracks that end anywhere in the pad, not just
at the pad anchor.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5945
2020-12-22 22:28:24 -05:00
70c397a9b4
Implement free vias fully
...
CHANGED: manually-placed (stitching) vias won't have their nets automatically updated
(unless the via is placed directly on a track segment)
CHANGED: stitching vias can be placed on footprint pads and pick up their nets
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5484
2020-12-20 16:29:50 -05:00
cd162a8f58
Honour m_placingVia when avoiding collisions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/3773
2020-12-20 20:36:19 +00:00
e8f38e3c18
Snap to footprint origin when dragging
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6633
2020-12-20 15:15:48 -05:00
ac793618f9
Set start item for inline dragging so that snapping works properly
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6796
2020-12-20 11:13:09 -05:00
46314f6483
Only compare collision-corrected routes when looking for shortest.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6511
2020-12-19 23:20:27 +00:00
acfbcb4beb
Make distinction between PCBNew-wide tools and Board-specific tools.
...
The old names were really hard to keep straight (even for me, who named
many of them).
2020-12-16 13:32:46 +00:00
5f9ed2583c
Don't put up double lock confirmation dialogs.
...
Also removes EditToolSelectionFilter which was misused in more places
than it was used correctly. The original point of the client filter
was to move the logic to the point of use, which the
EditToolSelectionFilter sort of obviated anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/6751
2020-12-15 22:34:24 +00:00
c0a9742b3a
Apply 0ef63aca47 to diff pairs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6314
2020-12-12 03:43:41 +00:00
dd4298bb94
Coverity fixes: 280374, 313611, 313648, 313649, and 314720.
2020-12-11 13:29:52 -05:00
0ef63aca47
Don't reset tail when changing track width/via sizes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6314
2020-12-11 17:58:36 +00:00
7cb2d19814
Honour alt-means-disable-grid-snapping in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6679
2020-12-11 13:11:47 +00:00
d304f12284
Formatting.
2020-12-11 12:48:04 +00:00
73b7b104cd
Fix some issues with Infobar sizing.
...
This also commits to the new strategy as it wasn't really compatible
with if-def-ing anymore.
2020-12-11 12:39:40 +00:00
be4b6ec06a
Cleanup compiler warnings
2020-12-09 23:13:33 +00:00
b1f0bf7334
More consistent naming.
2020-12-08 13:05:39 +00:00
aa3e29ee7c
Don't re-enter router on subsequent X key.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6656
Fixes https://gitlab.com/kicad/code/kicad/issues/4504
2020-12-08 00:13:29 +00:00
f09ca9ceee
Pass unhandled events when dragging in the router tool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6630
2020-12-06 12:30:29 +00:00
7b347d793b
Change gears on no-connect net generation. See bug rpt.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6534
Fixes https://gitlab.com/kicad/code/kicad/issues/6615
2020-12-04 18:25:48 +00:00
00edc85f4f
Allow layer switching when routing from pad.
...
Additionally, don't process layer events from both main loop and
transitions -- it makes for a mess.
Fixes https://gitlab.com/kicad/code/kicad/issues/4832
2020-12-02 21:17:56 +00:00
f2ac6fcd44
Treat net 0 items as each being in their own net.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6534
2020-12-02 20:05:47 +00:00
d06d35a74d
Formatting.
2020-12-02 20:05:47 +00:00
288ab7ed6f
Minor formatting cleanup.
2020-12-01 14:04:01 +00:00
06b9439dbf
Edge Cuts shapes have zero width.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6517
2020-11-26 17:42:46 +00:00
9c7c05c161
Mostly formatting cleanup but a few type-casting cleanups too.
2020-11-24 22:16:41 +00:00
976c6262f4
French translation update (fix also trailing spaces in a few sentences)
2020-11-23 11:42:25 +01:00
b32c2a6c90
Refactor EDA_TEXT::TransformToSegmentList() to return a vector of points
...
This allows reading text object as it is rendered through python API.
2020-11-23 07:50:54 +00:00
ff3bd7e72a
Fix a crash bug in DRC, and equate Margin to Edge.Cuts.
2020-11-20 21:22:27 +00:00
9e9946628a
Go back to arrow cursor on a cancel (or finish).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6421
2020-11-19 20:09:28 +00:00
99da663e82
Remove unused variables plus some more fixes from CppCheck
...
Remove unused variables plus a few more fixes from CppCheck
Remove unused variables plus a few more fixes from CppCheck
2020-11-19 02:28:47 +00:00
0e44f5128c
Add const specifiers
2020-11-18 19:50:36 +00:00
795e45836d
Fix assert in DRC.
2020-11-17 17:41:57 +00:00
7bd31d5237
Naming conventions.
2020-11-14 18:26:03 +00:00
ec020dd19f
First-class support for filled shapes.
2020-11-14 01:40:32 +00:00
bdbb68f813
MODULE -> FOOTPRINT.
2020-11-13 16:04:03 +00:00
3451ac3088
PCB_MODULE_T -> PCB_FOOTPRINT_T
2020-11-13 15:16:24 +00:00
52a46341db
More module -> footprint.
2020-11-13 15:16:24 +00:00
f5443de7f9
D_PAD -> PAD.
2020-11-13 15:16:24 +00:00
84dd5108ba
Remove some "class_" prefixes from files.
2020-11-13 15:16:23 +00:00
f7333ad64a
Update some classnames including archaic zone names.
2020-11-12 10:31:25 +00:00
da5cfb5df1
Improve commenting.
2020-11-11 17:52:15 +00:00
5e569e81e7
Performance enhancements for PNS.
2020-11-11 15:32:30 +00:00
d88eaaf477
Fix various compiler and Coverity warnings
2020-11-11 00:41:02 +00:00
ce3b2921bd
Sort potential start candidates by distance from cursor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1926
2020-11-10 23:50:57 +00:00
bd63c018c9
Don't snap synthetic priming event.
...
We need to let the consumer of the event do snapping (so that, for
instance, it can also snap to tracks, pads, etc.)
Fixes https://gitlab.com/kicad/code/kicad/issues/4365
2020-11-09 17:21:47 +00:00
64876a2761
PNS_DRAGGER should report its layers.
...
Also, don't use ViewGetLayers() for visibility checking. For some
things (like vias) it deals with synthetic layers, not board layers.
Fixes https://gitlab.com/kicad/code/kicad/issues/6328
2020-11-08 17:19:37 +00:00
81ea71fb80
More safety when fetching via sizes.
2020-11-07 18:50:30 +00:00
ae9afdd169
SNR. (Mostly for progammers, but a little for user messages.)
2020-11-02 16:20:00 +00:00
76ac8b5acf
Preflight routing so we can give a warning if it's not going to work.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4975
2020-11-02 00:10:21 +00:00
8bfb255c96
Put a warning when routing can't start due to DRC violation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4975
2020-11-01 23:46:42 +00:00
409cd9d4ee
Formatting.
2020-11-01 20:25:36 +00:00
f6c92ab1ea
DRAGGER needs to report it's nets.
...
Otherwise things like snapping don't work.
Fixes https://gitlab.com/kicad/code/kicad/issues/4147
2020-11-01 19:57:42 +00:00
a95e2184da
A more generic error message when route start pt violates DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1812
2020-11-01 18:23:07 +00:00
2c1b6e42e0
Repair ARC copy constructor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6176
2020-11-01 00:10:08 +00:00
fab87fb97b
Handle proxy items for the second PNS_ITEM as well.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6193
2020-10-31 23:23:54 +00:00
843974b0bf
Cleanup and formtting.
2020-10-31 15:50:06 +00:00
ba4d711356
I should have known better than to use a global....
...
When the board is closed and reopened the dummy items belong to a
freed board.
2020-10-31 15:50:06 +00:00
c17ceb5875
Make sure proxy items at least get the right net for clearance lines.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5980
2020-10-30 23:37:35 +00:00
a7d5d1f091
Add more consts all over the place
2020-10-27 11:03:35 +00:00
31e626f279
Cleanup creation of all our smart pointers
2020-10-26 23:52:44 +00:00
a785f70ea1
msgpanel is a widget, shove it to the right folder.
2020-10-25 20:01:12 -04:00
d6f91c810f
Fix a few compil and Coverity warnings.
2020-10-25 10:02:07 +01:00
81a7afc76e
Use kicad_algo directly rather than common.h
2020-10-24 08:53:11 -04:00
8d7feb3d72
Nip some common.h from headers
2020-10-24 08:28:03 -04:00
4085757aeb
Remove beginning/ending spaces in translations
...
Adding space padding makes translations more difficult by increasing
string counts
2020-10-20 12:08:04 -07:00
3045dbd6e8
Minor code clean-up.
2020-10-20 13:38:09 +01:00
d7ea70ba02
Don't assume a valid constraint.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6059
2020-10-18 20:58:53 +01:00
02cbcb99df
Fix broken logic in ImportSizes().
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6049
2020-10-18 12:08:16 +01:00
827699bed2
Just because we have a startItem doesn't mean it can find a width.
...
For instance, a pad with no other tracks attached will return 0.
Fixes https://gitlab.com/kicad/code/kicad/issues/6019
2020-10-17 13:57:07 +01:00
23d9e2e74a
New rules engine needs non-connected items as well.
2020-10-17 13:52:18 +01:00
1ee3df61c9
Improve robustness of infobar button handling.
2020-10-16 17:07:59 +01:00
eea7957e16
Inform user of bad DRC rules when filling zones.
...
ADDED: facility for hypertext links in infobar.
Also made use of this for via constraint errors when routing.
Fixes https://gitlab.com/kicad/code/kicad/issues/5800
2020-10-16 12:44:20 +01:00
9656bd310b
Remove eda_item and gr_basic from eda_text.h
2020-10-13 22:46:39 -04:00
cea73fe510
Restore net highlighting to router tool
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5962
2020-10-13 20:30:38 -04:00
fd4b9f0efa
PNS: ratlines need to not be debug graphics
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5995
2020-10-13 20:04:47 -04:00
ac8b072284
router: fix assertion failure when starting a route on an empty board
2020-10-13 19:36:36 +02:00
44dbe3577b
Create proxy items for PNS when needing to query clearances.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5929
2020-10-12 20:59:19 +01:00
c40483d18a
Cleanup: Move KiCad files into plugins folder
2020-10-12 16:36:08 +00:00
b92cb5c930
Hook up PNS via command to new rule system.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5951
2020-10-12 00:14:32 +01:00
bcebb19665
Add implied diffpair netclass rules.
2020-10-11 13:19:23 +01:00
79f91481f3
Fix missing break stmt.
2020-10-11 01:11:55 +01:00
f680ff17d6
Need an item to pick a netclass value.
2020-10-11 00:14:42 +01:00
22cde88ba9
Allow chamfering/filleting of zone/board edge intersections.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5947
2020-10-10 23:09:43 +01:00
04c4012ee6
Make track/via sizes UI more predictable and compatible with DRC.
...
Two main changes: netclass values need to go through the DRC engine
so they can interact with other rules. They're also now dependent
on the layer being routed as well as the start object.
Also make the controls adjust to each other better. For instance,
copy-track-width needs to turn off when you select a particular
track width, and a particular track width needs to zero out when
you choose copy-track-width.
Fixes https://gitlab.com/kicad/code/kicad/issues/5951
2020-10-10 19:32:30 +01:00
c5f01501c1
PnS, router/router_preview_item: fix incorrect size of SH_RECT shape when drawing it.
...
The width of the rectangle was used instead of the width of outline (usualy 0) to
draw the shape (when dragging the pad for instance)
Fixes #5944
https://gitlab.com/kicad/code/kicad/issues/5944
2020-10-10 10:03:23 +02:00
Jon Evans
Thomas Pointhuber
Jeff Young
david-beinder
Wayne Stambaugh
Tomasz Wlostowski
Marek Roszko
jean-pierre charras
Seth Hillbrand
Mikołaj Wielgus
Ian McInerney
Dominik Wernberger
hoijui
Peter Montgomery
qu1ck
Michael Kavanagh