* Removed Pcb_Frame argument from BOARD() constructor, since it precludes
having a BOARD being edited by more than one editor, it was a bad design.
And this meant removing m_PcbFrame from BOARD.
* removed BOARD::SetWindowFrame(), since BOARD::m_PcbFrame gone.
* Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp
* Added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance
* A couple of dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed,
such as dialog_mask_clearance, dialog_drc, etc.
* Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it
with build_version.h's #define BOARD_FILE_VERSION, although there may be a
better place for this constant.
* Made the public functions in PARAM_CFG_ARRAY be type const.
void SaveParam(..) const and void ReadParam(..) const
* PARAM_CFG_BASE now has virtual destructor since we have various ways of
destroying the derived classes and boost::ptr_vector must be told about this.
* Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use
an automatic PARAM_CFG_ARRAY which is on the stack.
* PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array,
since it has to access the current BOARD and the BOARD can change.
Remember BOARD_DESIGN_SETTINGS are now in the BOARD.
* Made the m_BoundingBox member private, this was a brutally hard task,
and indicative of the lack of commitment to accessors and object oriented
design on the part of KiCad developers. We must do better.
Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox().
* Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()
* Removed Pcb_Frame argument from BOARD() constructor, since it precludes
having a BOARD being edited by more than one editor, it was a bad design.
And this meant removing m_PcbFrame from BOARD.
* removed BOARD::SetWindowFrame(), and BOARD::m_PcbFrame
* Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp
* added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance
* a couple dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed,
such as dialog_mask_clearance, dialog_drc, etc.
* Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it
with build_version.h's #define BOARD_FILE_VERSION, although there may be a
better place for this constant.
* Made the public functions in PARAM_CFG_ARRAY be type const.
void SaveParam(..) const and void ReadParam(..) const
* PARAM_CFG_BASE now has virtual destructor since we have various way of
destroying the derived class and boost::ptr_vector must be told about this.
* Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use
an automatic PARAM_CFG_ARRAY which is on the stack.\
* PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array,
since it has to access the current BOARD and the BOARD can change.
Remember BOARD_DESIGN_SETTINGS are now in the BOARD.
* Made the m_BoundingBox member private, this was a brutally hard task,
and indicative of the lack of commitment to accessors and object oriented
design on the part of KiCad developers. We must do better.
Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox().
* Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()
Enhanced algorithms to calculate board connections:
Previously, a track was seen connected to a pad only if the track end is
exactly on the pad position.
Now a track is seen connected to a pad if the track end is inside the pad shape.
Algorithm to calculate pads connections to track is still very fast.
However some other functions (drag pads, track len calculation ...)
still need the track end exactly on the pad position.
Dead code removal.
* Replace Eeschema find code with a collector based implementation.
* Fixed a search bug when all subsequent searches of an item would ignore
the remaining valid child items when an item had more than one child
item that matched the search criteria.
* Add SCH_FIND_COLLECTOR class to find all items that meet the specified
search criteria.
* Add SCH_FIND_COLLECT0R_DATA to keep track of information for all matching
items.
* Use collector to iterate over the list of items that match the search
criteria rather than trying to start at the last matched item.
* Remove unused searching methods from sheet path and sheet path list
objects.
* Add replace and replace all functionality to Eeschema find dialog.
* Push matching methods down to EDA_ITEM class so they can be used by
other derived objects.
* Add method to EDA_ITEM to test if item supports replacing.
* Add flag to find/replace data to support replace feature.
* Disable wild card matching check box when dialog is in replace mode as
wild card replacement is not supported at this time.
* The usual Doxygen comment and coding policy fixes.
the GetPosition() and SetPosition() changes. It also starts towards making m_Orientation
and m_Thickness fields private with accessors, but does not complete this latter goal.
* Fix bug in hierarchical searches using sheet path pointers which are
destroyed on every search. Use human readable path as last sheet found
in test to prevent comparison of deleted pointers.
* Fix a bug in SCH_COMPONENT::Matches() that would prevent searching for
pins if the search all fields flags was not set.
* Fix a bug in SCH_COMPONENT::Matches() to use the sheet path to perform
the comparison to the correct reference designator and unit number.
* Fix wrapping in sheet path and sheet path list MatchNextItem methods.
* Push search methods down to EDA_ITEM object so advanced searching can
be performed on all items derived from EDA_ITEM.
* Add virtual method to EDA_ITEM object to test if item supports replacing
text.
* Replace switch statement magic numbers in Eeschema socket connection code
with Pcbnew for improved readability.
* Move the component library save file creation and write error dialogs
into the appropriate frame object.
* Change the save component library and document definitions take an
OUTPUTFORMATTER object instead of a file name.
* Change the component alias save document definition function to take
an OUTPUTFORMATTER object instead of a file handle.
* Replace C malloc() and free() functions with C++ new and delete
operators or the appropriate STL container.
* Add option to end mouse capture function to skip executing the end
mouse capture callback.
* Lots of coding policy and Doxygen comment goodness.
Added configuartion option KICAD_NANOMETRIC for this.
* With option set to false: *
- it should work and compile as usual
- some values are saved with decimal point (which should be backward/forward compatible as old versions should just drop fractional part)
* With option set to true: *
- lengths in Global Design Rules should be settable 1nm steps.
FROM/TO_LEGACY_LU(_DBL) macros introduced for easy interconnection between old and new units.
* Use version of DateAndTime that returns a wxString and delete the
version that takes a char* as it is no longer required.
* Merge StrNumICmp() and StrLenNumICmp() into StrLenNumCmp() to create a
single function for comparing strings with integers and remove a lot
of duplicate code.
* Remove unused strupper from string.cpp.
* Use wxArrayString for sorting the EDA_LIST_DIALOG contents.
* Modify algorithm to correctly calculate the virtual drawing size and
offset required to place the drawing correctly under all conditions.
* Ignore default wxWidgets scroll keys on Windows in EDA_DRAW_PANEL key
event handler.
Lee algorithm replaced by a Minimun Spanning Tree algo (using Prim's algorithm ).
Tested on a 5350 pads board, it is more than 100 times faster.
Also fix a crash when clicking on tool "delete selected items" (main horizontal toolbar),
and remove this tool (currently, no code in Pcbnew for this tool)
More about code refactoring in connect.cpp: RecalculateAllTracksNetcode() is 50 times faster with a board using 27000 tracks
Use right icon in pcbnew for load board and new board.
* Create command event handler for orienting schematic items and block.
* Remove redundant orient item and block command handler code and IDs.
* Remove redundant cancel current command event table entry.
* Remove unnecessary schematic bitmap object virtual functions.
* Set path when saving schematic sheet files to prevent assertion in
updated path and file write permission test function.
* Restore directory and file name write permission test function to it's
previous behavior to prevent unexpected save results.
* Add an assertion to verify the path is not empty to directory and file
write permission test function.
* Improve documentation for path and file write permission test function.
* Fix Doxygen link warnings.
* Create command event handler for draggining all schematic items.
* Remove redundant delete item command handler code.
* Remove unused close current tool command ID from process special
functions event handler.
* Add a rotate event handler to schematic frame object.
* Remove unique rotate item command IDs.
* Use process event instead of post event to eliminate the need to clean
up the command event client object from the heap.
* Unify find next item and next DRC error hot key commands.
* Unify move and rotate hot keys commands.
* Remove external dependency for adding suffix to reference designator
fields.
* Make schematic field get and set position methods transform coordinates
relative to the parent component object that owns them.
* Make base text class get text method virtual so derived classes can
change the base string according to their individual requirements.
* Fix a problem with default place schematic item add in last commit.
* Tweak move item to support moving schematic sheet pin objects.
* Change schematic sheet pin set position to constrain position within
the parent sheet.
* Schematic sheet pin moving now handled by unified move code.
* Remove old schematic sheet pin move code.
* Add custom client data object for passing hot key information to
command event handlers.
* Fix a bug that prevented changes to schematic sheet pin objects from
being undone.
* Add get and set position methods to all schematic items.
* Encapsulate schematic item position members.
* Add swap data method to schematic items that lacked one.
* Remove global swap data function used by undo and redo functions.
* Unify as many schematic move methods as possible.
* Remove unnecessary place schematic item methods.
* All schematic items are now moved in the same event handler.
* Fixed bug in hierarchical sheet get menu item string method.
* Make no connect and junction items movable, fixes lp:804048
* Grammar and spelling fixes in Eeschema, CvPcb, and Pcbnew path and
library dialog tool tips.
* Translate the French file name subrill.cpp to highlight.cpp.
* Lots of coding style policy fixes.
* Factor test for auto save file into base frame class.
* Added auto save feature to Eeschema for saving schematics, addresses
launchpad question 173631.
* Add auto save interval control to Eeschema options dialog.
* Fix problem with subsequent auto saves in last commit.
* Factor auto save common code into base frame class so all frame windows
can take advantage of the shiny new auto save goodness.
* Use a timer instead of depending on mouse and keyboard events to trigger
an auto save.
* Check for auto save file when opening a board and ask user if they
wish to use the auto save file or the last saved board file.
* Protect all base frame public members.
* Define function to allow schematic objects to create their own net list
objects.
* Add net list object creation functions to schematic line, junction, and
no connect objects.
* Add license statements to all modified files that required one.
* Move the hierarchical label connected test into the NETLIST_OBJECT class.
* ERC pin type strings can now be translated.
* Remove unused EDA_DRAW_PANEL attribute from all ERC test functions.
* Add get marker count method to SCH_SCREENS object.
* Redundant header removal.
* Lots of coding style policy fixes.
* Correct all user strings and comments for the correct capitalization of
application names according to JP. They are KiCad, Pcbnew, CvPcb,
Eeschema, and GerbView.
* Add a note the the user interface policy about the correct capitalization.
* Add visible clearance when edit node or track segment,
add parameter "show clearance for new or edited track with via area"
in "Display options" menu.
* Move auto save time global variables into PCB_EDIT_FRAME object.
* Move footprint library name list global variable int PCB_EDIT_FRAME
object.
* Improve library back up and temporary file error message strings and make
them translatable.
* PCBNew string unification.
* Translate French code names and comments.
* Coding style policy and Doxygen comment fixes.
* All header files used to create the PCB common library now compile as
stand alone code. This prevents the need to define them in a specific
order to make source code compile properly. It should also now be
possible to relocate the source code to build the common PCB library
to a separate folder.
* Remove sine and cosine look up tables from trigo.cpp and replace them with
sin() and cos() math functions.
* Large include file clean up to prevent header ordering dependency build
failures.
* Translate French code names and comments.
* Lots of coding style policy and doxygen comment fixes.
* Refactor locate footprint function into the board object.
* Remove locate.cpp as it is no longer needed.
* Actually remove track.cpp from repo that I missed on the last commit.
* Increase the size of the layer pair tool bar bitmap so that it looks
better with the new larger tool bar images.
* Fixes to prevent common headers from complaining when not included
in the correct order in source files.
* Move various locate functions into the appropriate board item object.
* Unified best zoom for all frames derived from PCB_BASE_FRAME.
* Remove track.cpp as it is no longer needed.
* Dead code removal.
* Remove scary frame window pointer member from board item objects.
* Add draw bounding box to gerber draw item for debugging purposes.
* Replace use of wxICON by new icons declaration.
* Remove unused files.
* Fix filenames inconsistencies between old and new icons.
* dialog_erc handle variable size icons in erc matrix.
* Add hotkey fast switch to two grids: for place and trace
Alt+"1" - switch grid for place module
Alt+"2" - switch grid for trace
This two grid set in dialog - menu Preferences->Dimensions->Grid.
* Add hotkey switch grid:
"`" - switch to next grid
Ctrl+"`" - switch to previous grid
* Add hotkey switch track width:
"W" - switch to next track width
Ctrl+"W" - switch to previous track width
cmakemodules:
* Add GOST to KICAD_BUILD_VERSION if define KICAD_GOST.
* Changed <wx-2.8/xml/xml.h> to "xnode.h" in pcbnew_config.cpp to fix bug
when building against wxWidgets 2.9 and above.
* Convert broken wxXmlNode code to use XNODE.
* Overloaded XNODE constructor for creating child nodes.
* Translate French naming conventions.
* Translate French comments.
* Remove tabs from several source files.
* Coding style policy and Doxygen comment fixes.
* Add hotkey "P" - place item
* Add record and play macros for sequence hotkey.
Macros set to numeric key 0..9.
<Ctrl>+<numkey> - start record macros
<hotkey> <mouse move> ... <hotkey>|<mouse place>
<Ctrl>+<numkey> - end record macros
<numkey> - play macros
* Add menu save/read macros to/from xml-file
* Add configure rotate angle for rotate module: 45 or 90 deg.
* fix segfault when move/drag segment if disconnected to pad
Eeschema:
* Graphic texts ans labels: fix fully broken undo/redo code relative to the way undo/redo command
* handles changes (maintly move) for labels
* Fix minor bug for undo command relative to block rotate
* Remove dead code.
* Add new class BITMAP_BASE, and (for Eeschema) SCH_BITMAP to handle bitmap images in schematic.
Remember plot Bitmaps in not possble with all plotters.
* Rename all ADD_MENUITEM_* functions to AddMenuItem and move them to
wxstruct.h since they are used by the Kicad main frame classes.
* Move SET_BITMAP and SETBITMAPS definitions to wxstruct.h.
* Fix a bug in SET_BITMAPS that prevented enabling menu item images on
OSX.
* Rename MsgItem to EDA_MSG_ITEM.
* Remove redundant includes from modified files.
* Doxygen and coding style policy fixes.
* Warn the user that fields with no value and not it the field template list
will be removed from the component before exiting the edit component in
schematic dialog.
* Add a function to TEMPLATES class to check if template list contains a
field with a given name.
* Move the function to display the edit component in schematic dialog into
the SCH_EDIT_FRAME class.
* Doxygen and coding style policy fixes.
* Add USE_IMAGES_IN_MENUS definition to override the default platform
behavior for adding images to menu items.
* Update COMPILING.txt to document how to use USE_IMAGES_IN_MENUS.
* Fix Windows segfault when creating language selection submenu introduced
by new bitmap code in r3087.
* Changed per email from JP from CVPcb to CvPcb because I'm getting old and
blind and misread the email.
* Lot's of Doxygen comment and coding style policy fixes.
* Check user write permissions before saving project, board, and footprint
library files.
* Append read only to file name and path in title bar when the user
does not have write privileges.
* Rename class WinEDA_ModuleEditFrame to FOOTPRINT_EDIT_FRAME.
* Lot's of Doxygen comment and coding style policy fixes.
* Check user write permissions before saving project and net list files.
* Append read only to file name and path in title bar when the user
does not have write privileges.
* Don't display file dialog every time the net list or project file is
saved.
* Add save as and save project file as commands.
* Make capitalization of CVPcb consistent in all user strings.
* Doxygen comment and coding style policy fixes.
* Add general purpose user write permission test function to base
window class.
* Check user write permissions before saving project, schematic and
library files.
* Remove displaying file dialog every time the project file is saved.
* Display absolute paths for non-root sheet file in title bar.
* Remove redundant command table entry from schematic editor.
* Remove unused variables to fix GCC 4.6 warnings.
* The usual Doxygen comment and coding style policy fixes.
* Raise 3D frame in PCB editor and module editor instead of displaying a message
dialog indicating that the 3D viewer is already open.
* Raise 3D viewer and module viewer in CVPCB to mimic the behavior changed in
PCBNew.
* Set focus to OpenGL canvas when creating 3D viewer so mouse wheel events
are handled on Windows without having to click on the canvas.
* Rename 3D viewer frame class from WinEDA3D_DrawFrame to EDA_3D_FRAME.
* The usual smattering of coding policy fixes.
* Change the minimum required CMake version to 2.6.4 for all build platforms
except Windows and OSX.
* Move all schematic plot code from plot.cpp into the appropriate schematic
objects.
* Create SCH_SCREEN plot method to plot all objects in the schematic
screen.
* Delete plot.cpp and remove it from the CMakeList file.
* Move code from function ClearProjectDrawList() into SCH_SCREEN object
Clear() method.
* Delete eeschema/delsheet.cpp as none of the code in it is ever called.
* Move global spice and net list command line variables into SCH_EDIT_FRAME
object as priviate members and provide access methods.
* Remove unnecessary header includes from eeschema/sheet.cpp.
* Minor coding policy fixes.
* Fix debug build warning (lp:793373).
* Changed sheet edit restore and undo to use object copy and replace method.
* Add minimum width and height constraints when resizing sheets that have
hierarchical pins.
* Fix drag sheet hot key bug.
* Change Doxygen configuration to extract private methods and members
when creating documentation.
* Fix a bunch of Doxygen comment warnings.
* Add drag context menu entry for junctions that actually form a junction
with wires to EESchema.
* Add function to test for junctions to SCH_COLLECTOR class.
* Create annotate type and sort order enums to eliminate magic numbers
used in annotate code.
* Remove duplicate Doxygen comments from annotate.cpp and improve the
actual Doxygen comments in wxEeschemaStruct.h.
* Create library collector class.
* Add clarification menu to library editor when multiple items are found
at the current position.
* Add get clarification menu text to all objects derived from LIB_ITEM.
* Add get menu bitmap for all objects derived from LIB_ITEM.
* Improve LIB_PIN bounding box calculation.
* Rename LIB_ITEM::DoGenCopy to doClone to match behavior defined in base
class EDA_ITEM.
* Minor class renaming for improved code consistency.
* Added less than operator to EDA_ITEM.
* Change class WinEDA_MsgPanel name to EDA_MSG_PANEL per coding policy.
* Change some old set message panel code in PCBNew with updated message
panel methods in EDA_DRAW_FRAME.
* Remove unused global function Affiche_1_Parametre.
* Minor Doxygen warning fixes.
* Component moves can now be undone do to incorrect virtual method declaration
in schematic component object.
* Undoing a field move now redraws the undone field properly.
* Fix bug when after aborting a field move kept displaying context menu
field items.
* Removed unused current field member variable and access methods from the
schematic edit frame object.
* Update component move code to comply with coding policy.
* Move undo item copy global variable into schematic editor frame object
member variable.
* Add helper methods for accessing the undo item copy member variable.
* Fix undetected bug when changing a text type.
* Added an exchange command to the undo/redo base class for handling undoing
a changed item type which cannot be undone by swapping out the variables.
* Revert change to common/hotkeys_basic.cpp that broke hot key behavior.
* Lots of coding policy changes while making the changes above.
* store selected language by name instead of wx language id (that changes between wxWidgets version)
* accept always comma and point as flotating point separator.
* Change all code references to pin sheet and sheet label to sheet pin to
more closely match the sheet pin object for improved code readability.
* Change menu and tool bar text from pin sheet to sheet pin for improved
user readability.
* Moved sheet pin place method to sheet pin object source file.
* Move last sheet pin stored state information into schematic frame object.
* Add Doxygen comments for the sheet pin editing methods.
* Remove specialized edit reference, value, and foot print field methods
from SCH_FRAME object.
* Improve general field method to handle all field types as this was
essentially the same code used in the three methods removed.
* Updated the the hot key and context menu handlers to use the new field
edit method.
* Minor Doxygen comment warning fixes.
* Push schematic back annotation code down into the appropriate class.
* Minor improvements to back annotate file selection code and user prompt
strings.
* Minor tool bar tool tip capitalization fixes.
* Change tool bar ID error from message dialog to a debug assert message.
* Add item clarification context menu to EESchema when multiple unresolved
items are found at the current cross hair position.
* Add collector class SCH_COLLECTOR for supporting multiple item hit testing.
* Removed bit wise masked filtering from schematic item hit testing.
* Removed all old hit testing functions and methods scattered about the
EESchema source code.
* Move terminal point test function into SCH_SCREEN object.
* Fixed bug in terminal point test when terminating a bus to a label.
* Define the < operator for sorting schematic items.
* Add area calculation method to EDA_Rect item.
* Add method for returning an item's bitmap for menu display purposes.
* Add method for returning an item's menu text for menu display purposes.
* Changed EDA_ITEMS container from boost::ptr_vector to std::vector.
* Factor coordinate string conversion code from EDA_DRAW_FRAME to function
CoordinateToString().
* Set default button on all dialogs that do not already have a defined
default button. The only exception is the EESchema net list dialog
which needs converted over to wxFormBuilder and due to it's design makes
setting the default button in any tab other than the default tab
problematic.
* Fix escape key dialog handling bug in EESchema print post script
dialog.
* Remove clearance and net class name read only text boxes from PCBNew
auxiliary tool bar.
* Display full net class information in message panel when an object that
supports net classes is selected.
* Move coordinate string conversion function to EDA_DRAW_FRAME object and
made it more versatile.
* Refresh message panel text when units change.
* Move locate function code into schematic screen object.
* Move test for junction needed into schematic screen object.
* Move test for marking connected items into schematic screen object.
* Move delete item function code into schematic screen object.
* Move delete all markers code into schematic screen object.
* Add method for locating multiple items in schematic screen object.
* Fix minor bug in schematic field object hit test declaration.
* Initial encapsulation work on item picker object.
* Remove duplicate doxygen comments from item picker object source file.
* Factor change schematic component orientation code out of switch statement
into separate function.
* Remove redundant command events from schematic editor hot key handler.
* Change EDA_ITEM set flag function to set flag bits using logical or
instead of assignment.
* Add clear flag function to EDA_ITEM to clear flag bit using inverted
logical and.
* Factor change schematic text type code out of switch statement into
a single function call.
* Schematic text orientation function renaming improvements.
* Lots of small coding policy changes to updated files.
* Fix grid select box update bug on context menu.
* Fix via size and track width select box update bugs.
* Fix layer pair indicator button update bug.
* Fix auto track width tool bar control enable bug.
* Fix via size and track width select status bug in context menu.
* Fix layer select box and layer control widget select bug when current
layer is removed.
* Add virtual function to notify objects derived from EDA_DRAW_FRAME that
the units setting has changed.
* Coding policy class naming fixes.
* Make EDA_DRAW_FRAME current tool ID member variable private.
* Added global no tool selected ID to replace application specific no
tool selected IDs.
* Change SetToolID to prevent setting the tool ID to anything less than
the new global no tool selected ID and assert on debug builds.
* Change command and update user interface command event handlers to use
new global no tool selected ID.
* Fixed schematic library editor add pin hot key handler.
* CVPcb now uses wxUpdateUIEvent instead of set toolbars.
* Removed duplicate event handlers in CVPcb that were factored into
EDA_DRAW_FRAME.
* Fix definition of GeneralControle() in CVPcb that prevented it from being
called.
* Remove rarely used and scary refresh code GeneralControle() method in all
main frame windows.
* Factor zoom menu and tool bar command IDs down to EDA_DRAW_FRAME.
* Old control state handling code completely removed in all applications.
* Factor common control state handlers into EDA_DRAW_FRAME.
* Replaced EDA_ITEM test for newness with IsNew() method.
* Factor vertical right toolbar command handlers out of giant edit command
switch statement in EESchema and PCBNew.
* Rename all member variables and methods that reference the cross hair
code in draw panel object from cursor to cross hair to eliminate confusion
between the two concepts.
* Rename cursor capture call backs in draw panel object to improve code
readability.
* Create helper class for turning off the cross hair while drawing.
* Remove redundant block clear code.
* Remove redundant mouse capture call back reset code when end capture
call back is called.
* Remove unused function definitions in base draw frame object.
* Lots of minor coding policy and doxygen comment fixes.
* Fix optimized bitmap grid drawing method.
* Enable optimized grid drawing method on Windows and Linux.
* Create a helper class for resetting and restoring device context scale
and origin settings for blitting purposes.
* Use wxLogTrace instead of wxLogDebug for coordinate dumping in
drawpanel.cpp. See comments for more information on enabling coordinate
tracing.
* Add flag to allow hiding the drawing cross hair. Hide cross hair by
default on OSX.
* Move get cross hair device position code from draw panel object to base
screen object.
* Remove redundant parent member variable from draw panel object by
overriding wxWindow::GetParent() method.
very minor enhancement in netlist dialog.
Gerbview: remove useless code I wrote specific to Windows in BOARD::Draw() function, because Wayne has fixed the bug.
common_plotPS_functions.cpp: remove a potential bug.
Rename some classes according to coding style policy.
* Fix rendering bug in GerbView caused by wxDC scaling change caused by
setting the wxDC clipping region.
* Eliminate the need to have optional background erasing as the change
above fixed that problem as well.
* Default cursor handling improvements.
* Schematic editor cancel current tool command now use a single command
ID that is used everywhere the event is generated.
* Moved cancel current tool code from Process_Special_Functions to a
separate event handler.
* Add idle check method to block select object.
* Add block active check to base screen object.
* Remove base screen methods from draw frame object and correct current
screen methods in derived objects.
* Move restore old wires function code into schematic screen object.
* Make add junction method use current screen position instead of store
position.
* Move poly line ghosting function into the delete current segment method
as that was the only place is was being used.
* Add method to base schematic object of testing if object has a label
that can be incremented.
* Simplified the schematic hierarchy traversing code.
* PCBNew Doxygen warning fixes.
* Changed managed cursor callback definition to include the current
cursor drawing position.
* Modified all managed cursor callbacks to match new definition.
* Added snap to grid option to base drawing frame object.
* Changed add no connect managed cursor callback to use new position
parameter instead of the stored one.
* Lots of coding policy fixes.
* Remove unused member variable m_SizeVisu from base screen object.
* Move nearest grid position code into base screen object.
* Add get cursor position method to base screen object.
* Add position parameter to OnHotKey method in base draw frame and all
derived objects.
* Pass logical position on left mouse button click and double click
events instead of device position.
* Pass logical position to on right mouse button click instead of device
position.
* Use logical event position parameter for locating items in EESchema
instead of the stored position.
* Remove unused position parameter when displaying component edit dialog
in EESchema.
* Comment out debugging macro in eeschema/template_field_names.cpp that was
preventing debug builds using wxWidgets 2.8.x.
* macros.h now has TO_UTF8() and FROM_UTF8() which are working converters
to and from UTF-8 encoding for any wxWidgets build mode. We can switch to
them at any time. I am using them now for specctra conversions and
elsewhere where I wanted gauranteed UTF8 encoding.
* added OUTPUTFORMATTER::Quoted( const wxString& ) to simplify converting
to UTF8 encoded s-expression atoms. The recommended technique is now simply:
out->Quoted( wxString ).c_str()
* Use wxDC to calculate screen center position.
* Minor grid drawing optimization.
* Remove an unnecessary use of global variable ActiveScreen.
* Doxygen warning fixes.
* Remove all occurrences if #ifdef USE_WX_ZOOM and all associated code within
the #else/#endif block ( old zoom code ).
* Removed the build option for USE_WX_ZOOM from CMakeList.txt and config.h.in.
* Removed all scaling code in base screen object.
* Fixed buffered paint and buffered client DC on Windows. Buffering works
properly on Linux and Windows.
* Modified kicad_device_context.h to automatically uses buffering on platforms
where double buffering is supported natively.
* Remove all of the scaled versions of the drawing functions in gr_basic.cpp
and any support code.
* Removed all traces of ActiveScreen global variable from eeschema and
gerbview.
* Renamed Recadre_Trace to RedrawScreen in draw frame object.
* Renamed PostDirtyRect to RefreshDrawingRect in draw panel object.
* Lots of code cleaning an Doxygen comment improvements.
* DSNLEXER::NextTok() now uses two separate modes to parse quoted strings.
This gives us the freedom to control our own destiny separate from the
constraints put on us by the Specctra DSN spec.
* Added Documentation/s-expressions.txt to explain all this.
* Enhanced our quoting protocol by moving away from doubling up double quotes
to a C line escape mechanism.
* Now support multi-line strings, which when properly escaped, can still be
read in as a token originating on a single line.
* Move schematic wire and bus break code into schematic screen object.
* Move schematic test for dangling ends into schematic screen object.
* Remove left over debugging output in schematic screen object.
* Remove unused file eeschema/cleanup.cpp.
* Fix bug in schematic line object hit test algorithm.
* Fix a string concatenation compile error added in r2752.
* Rename class WinEDA_BasicFrame to EDA_BASE_FRAME.
* Rename class WinEDA_DrawFrame to EDA_DRAW_FRAME.
* Rename class WinEDA_DrawPanel to EDA_DRAW_PANEL.
* Encapsulate file name member of base screen object.
* Encapsulate associated screen member of schematic sheet object.
* Create add screen method to schematic sheet object to simplify setting
the associated screen.
* Move the change file name code in the schematic sheet object to the edit
sheet method in the schematic editor frame object to eliminate message
dialogs.
* Improve reference counting in schematic screen object.
* Add helper type definitions for changing schematic object storage to C++
containers.
* TokenList2DsnLexer.cmake now supports comments, which start with a leading
# character, and may be either on their own line or on a line after a token.
* DSNLEXER::PopReader() now pops even the last LINE_READER* and returns it.
++pcbnew:
* SPECCTRA_DB now inherits from new class SPECCTRA_LEXER, which led to a great
deal of simplification and code factoring.
* Moved specctra keywords into specctra.keywords.
* Rename sch_item files to sch_junction.
* Make global variable g_ItemToRepeat a private member of SCH_EDIT_FRAME
object.
* Encapsulate SCH_SCREEN reference count member.
* Change default build to enable wxDC zooming.
* Move sheet label find function into SCH_SCREEN object.
* Move draw screen items function into SCH_SCREEN object.
* Remove redundant page print method from SCH_EDIT_FRAME.
* Add method to hit test for all items in SCH_SCREEN.
* Add method for testing if junction is required in SCH_SCREEN.
* Fix Doxygen waring in help_common_strings.h
* Move update block pick list code to SCH_SCREEN object.
* Remove redundant drawing function RedrawOneStruct().
* Change context menu text "Noconn" to "No Connect".
* Change context menu text "GLabel" to "Global Label".
* Move schematic select block from global variable to SCH_EDIT_FRAME.
* Remove redundant schematic drawing code for eeredraw.cpp.
* Move block select code into SCH_SCREEN object.
* Simpilify block item select code.
* Fix bug in SCH_LINE selection state test.
* Add test to schematic objects for connectability.
* Make copy block items function a private method in SCH_EDIT_FRAME.
* Added the basic structure to the Sweet parser in sch_part.cpp.
* Got inheritence working off of the 'extends' keyword and PART::inherit()
* Tossed the units support out of sweet.keywords, since we agreed to go dimensionless.
++richio:
* Added the problemInputLine support to PARSE_ERROR, so UI can show the
offending line of bytes. Yes bytes, not even guaranteed to be characters.
Eeschema: cleaning code. Start work to enhance annotation algorithm.
Already added an option to annotate using sheet number (sheet 1 uses numbers 100 to 199, sheet 2 uses 200 to 299..).
Works fine if deleting existing annotation, but needs work to be used when the existing annotation is kept .
Rename EDA_Rect::Inside to EDA_Rect::Contains ( EDA_Rect::Inside( const EDA_Rect& aRect ) was very ambiguous )
Fix some Doxygen warnings and erroneous comments; Add comments.
Added: in file dialog, multiple file selection.
Added: Draw mode selector (in left toolbar):
Raw mode:
a Gerber image is drawn on screen without buffering.
Artifacts happen if there are negative items drawn, if more than one Gerber file is shown.
Stacked mode:
each Geber image is drawn in a buffer and after drawn on screen
No artifact with negative items.
Each Gerber image covers previous images.
OR mode (transparency mode):
each Geber image is drawn in a buffer and after drawn on screen
No artifact with negative items.
Each Gerber image is "ORed" with previous images, like in Pcbnew.
Try to optimize Draw function in buffered modes.
(Useful for PC that have problems with "blit" graphic function)
Fix minor issues.
soldermask. Nevertheless, it would be nice to have proper gerbers to
begin with, i.e., gerbers with no silkscreen in soldermaskless areas.
Of course, most of the problem can be taken care of by drawing the
footprints properly. However, sometimes the silkscreen of one
footprint ends up on the pads of another one (think components under a
so-dimm card, for example). The attached patch adds an option to
subtract the soldermask from the silkscreen when doing gerber output.
marco
* All library component object editing is now performed with the ojbect
except LIB_PIN (coming soon).
* Added TRANFORM class to handle coordinate transforms.
* Remove old transform matrix functions.
* More file renaming to align them with the other component library
object file names.
* Fix hot key bugs in library editor to disable edit keys while an item
is being edited.
* Fixed bug when cancelling rotation of text and field objects while
being moved.
* Break classes_body_item.cpp(.h) into more reasonable size bites.
* Rename classes_body_item.cpp(.h) to lib_draw_item.cpp(.h)
* Fix some unsatisfied header file dependencies.
* Add stubs to component library draw item base classe to handle editing
internally.
* Lots of code cleaning.
* Changed wxPenStyle which is not define in wxWidgets 2.8 to int and
renamed GRRect to prevent duplicate function definition in gr_basic.
* Add missing wxT() macros to strings in rs274x.cpp.
* Use C++ map in component library instead of boost::ptr_vector.
* Drop Boost pointer containers for standard C++ containers.
* Moved duplicate name user interface elements from library object to
library editor.
* Added code to support direct addition and replacement of component
alias objects into libraries.
* Removed temporary strings used to add and remove alias objects.
* Libraries only store alias objects, components now accessed thru alias.
* Simplify library API for adding, removing, and replacing components.
* Updated edit component in library dialog and library editor to reflect
component library object changes.
* Fixed bug in library viewer when displaying alias name.
* Made a few header files compile stand alone per the new coding policy.
* Remove some dead code and the usual code formatting fixes.
* reverted clock ( --<| ) as it is commonly used for inverted clock in x-USSR
* nonlogic ( ---X ) for non-logic pins of logic ICs (commonly used for power and timing RC pins).
Added hotkeys editor from David Turner, with a lot of enhancements and fixes
Added pins connections info in intermediate netlist for each compoment. This is redundant, but some netlist formats (ORCADPCB, PSPICE) are very easy to create with this redundant info.
Fixed some issues with wxWidgets 2.9.1 (fixed Gerbview and Pcbnew crashes under Linux when starting. Could explain also crashes under MACOSX)
Code cleaning.
pcbnew:
Added experimental zone fill calculations with boost::polygon
old file zones_convert_brd_items_to_polygons.cpp has now 2 versions:
zones_convert_brd_items_to_polygons_with_Boost.cpp use boost::polygon to calculate filled areas
zones_convert_brd_items_to_polygons_with_BKbool.cpp use kbool (code cleaned).
>>> to use boost polygon version:
call cmake with option: -DUSE_BOOST_POLYGON_LIBRARY=ON
Eeschema: added patches from Yuri Khalyavin
inches and mm, the industry is crazy enough to force us with mixed
design. For example I routinely use imperial units for track size and
clearance, but drilling is strictly a metric issue...
So I added a little parser to recognize a suffix specification in the
unit text boxes... so you can put in things like:
1in (1 inch)
1" (idem)
25th (25 thou)
25mi (25 mils, the same)
6mm (6 mm, obviously)
The rules are: spaces between the number and the unit are accepted, only
the first two letters are significant.
As a bonus, it also recognize the period (.) as a decimal point
substituting it with the correct locale character (there was a wishlist
for it, IIRC). Most useful for number pad fans :D
* Fix a minor problem with wxFileDialog to open a file that no longer
exists in PCBNew.
* Make GerbView open file behavior the same as PCBNew.
* Remove redundant PCB file wild card definition.
* Add open file refactor task to the todo list.
* Fix some minor code formatting issues.
* PCBNew remembers last net list read during the current editing session
as well as between project editing sessions. Closes bug 576902.
* Separate PCBNew application settings from project file settings and
allocate them dynamically instead of statically to make it easier to
eliminate global variables.
* Add CMake script to generate DSN token header and source file from
token list file.
* Add preliminary component library DSN token list and lexer file to
test script and prepare for new component library file lexer.
* EESchema: right click on ERC check mark displays error in message panel.
* Remove PCBNew header file dependency from common DSN lexer source.
* Minor code clean ups.
Pcbnew: Fixed an issue in GERBER file creation, under Vista and W7 only for non administrator users
Plot files were 0 byte length.
This was due to use of function tmpfile() in a GERBER function to create a temporary file that seems not working using mingw.
Replaced by more usual files functions.
* Some bugs fixed
* Starting enhancements in Libedit: menubar and commands to "plot" current component in PNG or SVF file (SVG file not fully working, must be refined)
* Replaced find dialog with wxFormBuilder version.
* New find dialog is modeless, supports more advanced search features,
remembers it's last position, size, search history, and search settings,
and implements initial support for replacing.
* Added Shift+F5 hot key to search for next DRC marker. F5 now just
repeats previous search.
* Minor cosmetic enhancements to label edit dialog.
* Remove tab from grid size text printf to fix toolbar grid combobox
display in wxGTK.
* Updated my TODO list items.
* DSNLEXER now owns an abstract LINE_READER by pointer so that polymorphism
can be used in alternative LINE_READERS.
* Write FILE_LINE_READER and STRING_LINE_READER. The latter can be used
to parse text coming from the clipboard or other string source.
This paves the way for other kinds of LINE_READERs, such as one which reads from a
multiline string which comes from the clipboard.
Will still need to:
1) add new additional DSN_LEXER constructor,
2) virtualize the LINE_READER's ReadLine() function
3) create derived class from LINE_READER.
* Make USE_WX_ZOOM clipping routine actually clip rather than just test
if line needs drawn.
* Clean up as many USE_WX_ZOOM #ifdefs as possible.
* Minor coordinate rounding improvements.
* Minor scrolling and panning improvements.
* Remove unused KicadGraphicContext object code.
1) nested quotes. This is in anticipation of broader usage of the
file type/syntax. A string like this in the file:
"my ""favorate"" string"
can be returned as
my "favorite" string
2) CommentsAsTokens is implemented, so you can ask the lexer to return
comments as tokens, so they can be preserved. The default is to ignore
them. A comment is defined as any line that has # as its first
non-blank character. (This means comments cannot follow anything else
on a line.)
* Implement code to allow wxDC to handle coordinate conversions between
device and drawing units.
* Add build settings to enable wxGCDC for wxGraphicsContext testing.
* Remove wxAUI conditional build cruft as it is now required to build
Kicad.
* Fix scroll increment size regression to prevent jumping around the
zoom center position.
* Add find GDI+ cmake module for building on WXMSW when wxGraphicsContext
is enabled.