The ReloadFootprint function now exists in the base class with 1
argument, but this frame already had a similar function with no
arguments. Rename this one to RegenerateFootprint to prevent warnings.
We don't really control when these are called, so best not to assume
we've finished initialization of the frame/screen/document/whatever.
Possible fix for KICAD-KY.
Note that this only works where a BOARD_COMMIT or SCHEMATIC_COMMIT is used.
(BOARD_COMMIT is used almost universally in PCBNew, but SCHEMATIC_COMMIT
has very little adoption in EEschema so far.)
ADDED: The -n or --negative option for exporting negative svg or pdf plots
from kicad-cli. Example usage: kicad-cli pcb export svg -n -l B.Cu board.kicad_pcb
This commit partially reverts deb3cbf8. VIA and SOLID operator='s introduced in it do a good job but the cloning of holes in addHole() causes bogus collisions.
The diff-pair placer creates DIFF_PAIRs on the stack, which have
VIAs in them, which have HOLEs in them. The HOLEs get put in the
NODE's index, and we then crash later when doing a collision after
the stack variable has gone out of scope.
The stack variable is also copied while doing a search for "best",
and without the operator= definitions the "best" and the "original"
both think they own the HOLE.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14852
We need to check if a lockfile is valid to determine if we should
override the lock. Valid() is true if the lockfile couldn't be created
b/c of permissions or if the lockfile could be created and acquired.
This was causing intermittent shove hiccups/freezes as RULE_RESOLVER::GetClearance() could return a bogus clearance value, taking
a cached value for an item that does not exist anymore. If the allocator/stack accidentally reclaimed such item's address - we were getting
very nasty and difficult to reproduce misbehaviours of the shove algorithm. Hopefully this patch fixes this. More info in the comments.
Note to self - I'm still not fully convinced I want PNS::ITEM pointers as the cache key, probably a unique counter would be better here.
When editing or viewing library symbols, the files are watched for
underlying changes. If any occur, the user is either prompted to reload
(if reloading would overwrite their current edits) or the file is
silently updated to the current version on disk.
This also sets a custom assertion handler to avoid unneeded crashes when
recieving invalid SAMBA packets and turns off assertions entirely when
running in release (non-debug) mode
The root cause was not removing the original (pre-dragging) via from the world, comparing the ITEM::Parent() pointers of the items was only hiding the main issue.
This also fixes the PNSViaCollisions test in the qa/ suite.
1) Also reorders parameters to make sure the compiler helps out.
2) This also makes it harder to mess up the discrepency between
BOX2I/wxRECT/etc::Inflate() and SHAPE_POLY_SET::Inflate.
3) Also fixes a couple of bugs where the corner strategy was passed
in as a segCount.
4) Also fixes a couple of bugs where the error wasn't forced to the
outside to match the ERROR_LOCATION.
5) Also fixes a couple of bugs where the seg count was specified
without regard to an already passed-in max deviation
Don't open-code knockout text shape generation in several different
places.
Make sure triangulated knockout text gets clearance added when
specified.
Collapse duplicated footprint text item plot routine (they're no
longer any different from plotting pcb text items).
Temporary and autosave files do not neccessarily have the correct
permissions set to replace existing project files. This updates the
permissions to match the existing values where possible
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13574
wxSingleInstanceChecker is meant for running programs, not file locking.
This implements an RAII class for file locking that stores the lock
files next to the file being locked, allowing it to be easily found and
removed. Also includes the ability to override the lock, with
information about the original owner
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14734
The previous test didn't handle is-self-tests between a hole and
its override in a different NODE. When calculating the pushout
force we don't remove the via (and its hole) from the current
node until after the calculation, so we end up checking for
collisions between the new (cloned) via's hole and the original
hole in the root node.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14795
The layer combobox color swatch was clipped when the combobox was
closed when the dialog was launched. Setting the minimum width
resolved the issue. This may have been a GTK only issue.
Operator[] was creating an empty entry in the connectivity map,
fooling us into thinking the item had already been added.
Worryingly, this bug has been in there since 2017; a recent
change in teardrops just happened to expose it.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14781
Change teardrop generation to rely more heavily on BOARD_CONNECTIVITY
for improved performance.
Add updating of teardrops on BOARD_COMMIT::Push().
Also converts m_CopperItemRTreeCache to std::shared_ptr.
We don't copy it around anyway, and having to create a new set
of std::unique_ptr's for each operation is likely to be more
expensive than std::shared_ptr's overhead.
Version 7 text alignment changed subtly for stroke fonts from version 6.
Additionally, the output has been different between screen and plotting,
leading to offset text in plotted output relative to the text shown on
screen.
This introduces a fudge factor in FONT::getLinePositions to correct the
offset in the plotting output relative to v6.
This also changes the SCH_PAINTER and PCB_PAINTER to correct the
relative offsets between GAL and PLOTTER classes. The source of these
offsets is atm unclear.
Fixes https://gitlab.com/kicad/code/kicad/issues/14755
If you drag a track out and connect to a pad then press the hotkey
to switch the track posture it may not switch because the track
posture selected when the pad was reached is different than the one
that the mouse trail placer drew. As the aspect switching is done
in the mouse trail placer it does not know that the line placer
already override the track.
To correct this, in LINE_PLACER::FlipPosture() if the aspect is not
currently manually forced then copy the current aspect from the
line placer to m_mouseTrailPlacer before calling the FlipPosture()
method of m_mouseTrailPlacer. This will only be done once per
dragging session as once the aspect is manually forced it remains
manually forced. This seems to fix the issue with no undesirable
side effects.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12369
A sheetpath is required to correctly resolve text variables.
Depending on currentSheet is rife with bugs.
There are many places where we do *not* want to be prepending
field names to the field values, such as netlisting,
building PDF hypertext menus, etc.
Also, Find/Replace needs to work on unresolved text, as
that's what we're going to display (and if replace nuked
your variable references you wouldn't be happy).
In particular, when a CN_ITEM is freed set all its anchor's
item pointers to NULL. (The anchors have a separate
lifecycle due to being std::shared_ptrs.)
Hopefully fixes Sentry KICAD-KV.
Also simplifies the scoring algorithm so that it only
differentiates between exact-match, match-at-start and
any-match. The rest of the position-based matching
stuff is gone, as is the knowledge of the name vs the
keywords vs the description. All that is left to the
provider of the weighted search terms array.
- SCH_SYMBOL::GetMsgPanelInfo(): slighly change the displayed lines to allow
longer strings in Description and Keywords
- panel_setup_rules_help.md: fix incorrect html link (URI), creating ERR 404
Provides a single-point access for modifying the schematic and symbol
elements that allows chaining updates and reverting partial changes.
Standardizes the undo hierarchy between pcb and schematic editors
As this is another layer on the existing undo/redo structure, the
initial commit does not replace all undo/redo calls currently existing.
These will be handled in a series of follow-on commits
Adds QA checks to copper sliver tests. Adds the following checks:
- Dot product between two arms (quickly avoids checks for >90°)
- Checks the sliver is convex (area test)
- Eliminates minor slivers with angles that are approximately 0 and ones
with the opposite side width beneath a configurable level
- Updates Clipper2 to fix a couple of jagged edges on inflate
- Adds simplify during zone fill inflation to limit jaggies
Fixes https://gitlab.com/kicad/code/kicad/issues/14549
in GetMsgPanelInfo() (PPI, scale).
m_image name was confusing: it is not a wxImage, but a BITMAP_BASE item,
and m_image name was already in use in BITMAP_BASE, used inside SCH_IMAGE.
Bitmap properties dialog: show PPI value and add Title to dialog.
Our basic logic for whether we have a hole or an outline in a footprint
checks if there is copper pads outside of the closed edge. This misses
the case where the footprint is used to align multiple holes but has no
copper. Since we do not support multiple outlines in a board, we can
safely assume that multiple, closed edges in a footprint represent holes
and not outlines
Fixes https://gitlab.com/kicad/code/kicad/issues/14468
Settings loading needs to account for potential chaining, so each
instance should be created before being Load()ed. Additionally, add the
settings loading to QA
Settings should be initialized on start-up. This removes the option of
lazily loading the settings from file and instead requires all settings
needed to be loaded on KiFACE start before requesting data from the
settings object
DRC exclusions were originally written following the C++
pragma model (ie: allow this violation here). However, the
"exclusion" terminology we used in the GUI suggests a model
model where the exclusions go away when the violation no
longer exists.
Fixes https://gitlab.com/kicad/code/kicad/issues/14351
That even was removed by upstream wxWidgets in
81570ae070
which is included in all versions after 3.1.1, so our 3.2 versions
definitely aren't doing anything when we pass this event. The actual
identifier has also been guarded behind a 3.0 compatibility define in wx
as of 3.3.
This method shadows the C++ method, and doesn't properly handle updating
the duplicated object's KIID to be unique.
Also add tests to ensure the KIIDs are unique after duplication.
Fixes https://gitlab.com/kicad/code/kicad/issues/14460
About 1/3 of callers to Parent() don't care if they get the immediate
parent or not, about 1/3 want only the immediate parent, and about 1/3
want the hole parent's Parent().
I had earlier changed PNS::ITEM::HOLE to override Parent() and return
the hole parent's Parent(), but since the callers are pretty evenly
split I've reverted that and added BoardItem() for callers who want the
eventual BOARD_ITEM (whether a direct parent or a grandparent).
(Also removes a dead routine so I didn't have to figure out which of
the two it wanted....)
(While we don't currently have holes without a parent pad or via, you
could imagine using HOLEs in the future to represent a hole in a first-class
board outline, so better not to build this assumption in.)
- LINEs now own their vias optionally (depending whether a LINE with its VIA belongs to a node)
- get rid of unique_ptr on the internal NODE::Add API (and also made it private)
- make sure stack pointers are not added to the node
- use rvalue reference for NODE::Add/NODE::Replace
Manually rebased by Jeff Young <jeff@rokeby.ie> 5 April 2023
pickSingleItem() had a two-attempt algorithm, but the second attempt
was never made because we'd check for no hits before throwing out the
aAvoidItems.
The second attempt would fail anyway because QueryHoverItems() ignored
the aUseClearance flag when not idle, and didn't factor in the actual
clearance.
The spacemouse driver, particularly on Mac, is extremely unstable and
causes crashes even when not being used. This places the interface
behind an advanced config flag to ensure that users can affirmatively
opt-in to the potential for crashes
- ensure the metadata GBR_NETINFO_CMP is added to all PCB_SHAPE living in a footprint
- fix a too zealous plot of negative objects on the silkscreen layers, when
merging layers to silkscreen layers.
This reverts commit 33da9b2327 and the
following commit dc08c48f33.
C++17 changed the behavior of static class member variables that are
constexpr defined. Previously this definition/declaration split was
valid for constexpr members, but after C++17 the static constexpr member
variables are automatically inlined, so the declaration is no longer
exported in some compilers (GCC 9/10/11 seem to have problems).
An alternate way of constexpr member variables is putting the
initialization in the class definition, but we can't init a COLOR4D
object when defining the COLOR4D class.
For now, revert this change until we can figure out the proper way of
architecting these colors.
This library is meant to move non-EDA items (language extensions,
library extensions, etc.) into the lowest-level of our dependency chain.
This library should never depend on anyother non-thirdparty code in the
kicad codebase.
After last changes in PCB_SHAPES, there were issues when comparing coordinates
of shapes.
Use now a footprint not flipped, not rotated and at position 0,0 for comparisons.
Fixes#14496https://gitlab.com/kicad/code/kicad/issues/14496
- prerequisite for holes as first class objects code
- introduced the OWNABLE_ITEM interface that defines the owning container (NODE/other ITEM/ITEM_SET)
- simplified the ITEM_SET interface
- constified a lot of APIs (ownership/JOINT management) as a side effect
Rebased and cleaned up by Jeff Young <jeff@rokeby.ie> 5 April 2023
- some STL cover types removed
Ian McInerney
Jeff Young
CraftedNightmare
Roberto Fernandez Bautista
Alex
Jon Evans
jean-pierre charras
Tomasz Wlostowski
Nils VAN ZUIJLEN
Marek Roszko
Seth Hillbrand
Wayne Stambaugh
Ian McInerney
Steve Bollinger
Lucas Dumont
Mike Williams
qu1ck
Nimish Telang
Salvador E. Tropea