Added hotkey for cycling through net & netclass color modes.
Added hotkey for cycling through ratsnest layer visibilities.
Added code to display hotkey (if set) on the above and on high-contrast
cycle.
Fixes https://gitlab.com/kicad/code/kicad/issues/9312
Also cleans up the dialog a bit.
Also changes the workings of NormalizePath to return the input if
it couldn't be shortened which saves open coding that behaviour in
all its callers.
Fixes https://gitlab.com/kicad/code/kicad/issues/9036
Bright colors are maxed out for highlighting. Modestly darkening them
helps to distinguish them from their neighbors but keep the blue value
to help "glow" the selection
Fixes https://gitlab.com/kicad/code/kicad/issues/5560
The default is usually wrong and presenting the basic footprint
information when creating an empty footprint allows the user to
establish their preference before mistakes occur.
Fixes https://gitlab.com/kicad/code/kicad/issues/9215
We need to use a "C" locate to read/write files, and therefore switch the locale.
Removing use of setlocale( LC_NUMERIC, "C" ) and use only
wxLocale( "C", "C", "C", false ) was too fast: on linux it breaks the env vars.
on MSW
using setlocale( LC_NUMERIC, "C" ) generates an alert message in debug mode,
and this message ("Decimal separator mismatch") must be disabled.
But calling wxLocale( "C", "C", "C", false ) works fine
On unix:
calling wxLocale( "C", "C", "C", false ) breaks env vars containing non ASCII7 chars.
these env vars return a empty string from wxGetEnv() in many cases, and if such a
var must be read after calling wxLocale( "C", "C", "C", false ), it looks like empty
So use wxLocale on Windows and setlocale on unix
Copy Kicad2Step fixes back to Kicad's file resolver.
Remove Kicad2Step's autogeneration of some variables in favour of
just reading the config file passed by Kicad verbatim.
Fixes https://gitlab.com/kicad/code/kicad/issues/7670
The Python window is pinned to the main KiCad application but to the
user, it appears that the window opens in response to their clicking
eeschema or pcbnew. For this reason, we should re-center the python
window when the user will expect to see it when showing.
Fixes https://gitlab.com/kicad/code/kicad/issues/8623
On Windows, FILENAME_RESOLVER::ValidateFileName() always returned a illegal filename test,
because the separators ('/' and '\') are in list of illegal chars in filenames on MSW.
Also removes the message bar display of assigned netclass for
buses and bus-to-bus entries.
Also fixes a bug where assigning a netclass via the canvas only
looked at the first level of bus members (and not any nested
members).
Also fixes a bug where the bus name validator tried to validate
a vector bus first -- which doesn't work as a vector bus may be
nested in a group bus.
Also fixes a bug where we were failing to check for illegal
chars in bus definitions which otherwise passed the bus parsers.
See additional comments in the bug report.
Fixes https://gitlab.com/kicad/code/kicad/issues/9160
Some of the Japanese translators who are contribuinge to kicad-i18n
(https://gitlab.com/kicad/code/kicad-i18n) are
not contain the list, so add them.
I found the following translators was missed in the list.
```
Hidemichi Gotou <hgotou@pop16.odn.ne.jp>
KaoruZenyouji <kaoruzen@gmail.com>
kinichiro <kinichiro.inoguchi@gmail.com>
nosuzuki <nosuzuki@postcard.st>
starfort-jp <starfort@nifty.com>
```
Also removes the return value from the BITMAP_STORE's themeChanged
method as it will provide the wrong answer for the second frame it's
called on.
Also hooked up ACTION_TOOLBAR, the app launcher, and the project tree
to the wx event for system color changes so they change on the fly.
Fixes https://gitlab.com/kicad/code/kicad/issues/6026
Mac already uses diverse font sizes (for instance, smaller fonts for
radio button groups), and the anti-aliasing is a lot better. The
other platforms need a more limited range of sizes.
Fixes https://gitlab.com/kicad/code/kicad/issues/8608
It appears that both strategies in the last commit worked, leaving us
with squared scaling. The dialog pixel architecture seems safer than
our icon scaling stuff, so this version attempts to use only it.
Also works around a bug where wxELLIPSIZE_MIDDLE doesn't work on Mac.
Fixes https://gitlab.com/kicad/code/kicad/issues/8608
Fixes https://gitlab.com/kicad/code/kicad/issues/8375
This is a test split per requests. While "Latin American Spanish" is
not really homogeneous, there are distinct differences to European
spanish, so we are splitting in an effort to allow both translations.
If one is less viable, this may re-merge in the future.
Moving points should not be overrided by disambiguation menu, so we
track where the disambiguation event started and only trigger the menu
if the mouse hasn't moved a full unit in x/y
Fixes https://gitlab.com/kicad/code/kicad/issues/9132
Korean has recently been fully updated by a group of dedicated
translators. This adds the official menu entry.
Also remove Catalan as it hasn't been maintained during v6
Previously, we were checking if the selection tool was the top of the
stack but this ignored many other "secondary" tools that might be
running such as the point editor. These still allow the selection tool
to handle events such as clicks. This change allows the selection tool
to handle clicks when it is the primary tool on the stack rather than
the top
Fixes https://gitlab.com/kicad/code/kicad/issues/9110
This requires enabling the space key to be bound with shift, which was
disabled based on an overbroad limit of only allowing shift to be mapped
with letter keys
Previously, the count of segments used a magic number optimized for Pcbnew.
This is not good, and does not work well on Gerbview.
The count uses now a max error acceptable is approximation (5 microns in Gerbview and Pcbnew).
Fixes#9101https://gitlab.com/kicad/code/kicad/issues/9101
Some code seems to think it's :alias:path while other code thinks it's
alias:path. This commit updates both the Kicad2Step resolver and the
KiCad internal resolver to be agnostic.
In 7.0 we should probably get rid of aliases entirely. But that's a
story for another day....
Fixes https://gitlab.com/kicad/code/kicad/issues/9002
For some reason once a player is opened from the Kicad Manager window
all the items under the help menu get grayed out. This prevents that
from happening.
This standardizes selection tools in SELECTION_TOOL class to be able to
handle a long-click as asking for a non-heuristic disambiguation menu.
Fixes https://gitlab.com/kicad/code/kicad/issues/8490
- Update sch text help (~~ no longer gets converted to single ~)
- Update Eagle importer to correctly handle new overbar syntax
- Update CADSTAR importer to correctly handle new overbar syntax
This function attempted a poor-man's natural compare but it assumed
specific structure of the string. This broke for strings with
numberings that looked like decimals.
Instead, we use our natural string comparison function and remove the
references to this older function and its similar elements.
Fixes https://gitlab.com/kicad/code/kicad/issues/9067
curl.h has constraints on Windows (because it includes winsocks2.h) and must be
included before any wxxxx.h.
Because only very few files need curl.h, kicad_curl.h is included only in these files
Seems to cause issues on Windows where the animation locks the screen.
Doesn't effect Linux, possibly because wxWidgets uses a native GTK
infobar that doesn't animate anyway.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8987
Because the same parser is used to read all footprint files of a library,
the parser must be reinitialized (internal variable cleared) before reading
a new file, otherwise the previous parser state is applied to the next file.
Fixes#7627https://gitlab.com/kicad/code/kicad/issues/7627
For historical reasons they are stored in a string using spaces as separators.
So each fp filter is now escaped to remove spaces (replaced by {space})
Fixes#9009https://gitlab.com/kicad/code/kicad/issues/9009
Add control of project creation to Eeschema; change defaults
to enable project creation in both programs. Properly set
project on newly-created schematics so "Save As" doesn't
get triggered repeatedly.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9000
1) Don't wait for UpdateUserInterface to build the (global) list of
layer names.
2) Report clearance resolution between a silk layer and a mask layer.
3) When writing DRC reports, include info about the violating rule.
4) Report "no relevant layers" if we fail to find anything to write
a clearance resolution report about.
Fixes https://gitlab.com/kicad/code/kicad/issues/8963
Also reduces line-wrapping a bit.
I don't think this fixes the linked bug, but I can't reproduce it
and this was found while reviewing the code.
Fixes https://gitlab.com/kicad/code/kicad/issues/8810
They don't define a KiCad string class, so the header file name was
somewhat misleading. But the fact that they didn't match definitely
made coding more difficult.
This adds an icon to the left of the row with an error symbol if the
file can't be found or opened, and shows a tooltip over the icon with
and error string.
Fixes https://gitlab.com/kicad/code/kicad/issues/3815
Note that the dialogs which have mutliple options were not moved over
as it seems perahps not the right choice to have them save state between
sessions.
Fixes https://gitlab.com/kicad/code/kicad/issues/8762
The first time a DIALOG_SHIM was created, with a given size, this size
was not taken in account. This this is now forced.
(when recreated during a session, this is the last dialog size that is used)
This is because we don't yet support radial dimensions.
Also fixes a bug where we fail to read an Altium circular track. We
now convert it to a pair of 180-degree arcs.
Also fixes a bug where we were failing to import prefixes on linear
dimensions.
Fixes https://gitlab.com/kicad/code/kicad/issues/8789
Calling wxDialog::EndModal() directly from inside the dialog is a
potential bug if the dialog is shown in the modeless or window modal
(quasi-modal). Use the internal button events where possible and
check for the appropriate mode before calling the correct end dialog
function.
Fix the valgrind warning from the use of an uninitialized
member variable by setting the DEFAULT value for
m_currentNativeCursor in the constructors member initializer list.
This fixes the following warning caused by the SetNativeCursorStyle
method call later on the constructor.
==66660== Warning: client switching stacks? SP change: 0x1ffeffee40 --> 0xdf7efe8
==66660== to suppress, use: --max-stackframe=137187819096 or greater
==66660== Conditional jump or move depends on uninitialised value(s)
==66660== at 0x13F0764E: UnknownInlinedFun (graphics_abstraction_layer.cpp:276)
==66660== by 0x13F0764E: KIGFX::GAL::GAL(KIGFX::GAL_DISPLAY_OPTIONS&) (graphics_abstraction_layer.cpp:78)
Error can be reproduced and checked from the log.txt
by launching kicad with valgrind command
"valgrind --leak-check=full kicad > log.txt 2>&1"
and then launching the footprint editor from the kicad main dialog.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8784
Signed-off-by: Mika Laitio <lamikr@gmail.com>
Found via `codespell -q 3 -S *.po,./thirdparty -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,dout,einstance,modul,ot,overide,serie,te,,tesselate,tesselator,tht`
1) Fix a couple of bugs in case processing
2) Make case processing more explicit to prevent more (1)
3) Move label processing to AltiumSpecialStringsToKiCadVariables
4) Strip double-quotes from special strings (and add test cases)
5) Change PROJECTNAME to just filename, not full path
6) PROJECTREV and REVISION are two different things
7) Add support for Altium's Application_BuildNumber
8) Fix some issues in trimming spaces around special strings
ADDED CURRENT_DATE titleblock token (to go with existing ISSUE_DATE)
ADDED PROJECTNAME schematic token (to go with FILENAME and SHEETNAME)
Converts other parameters to project text variables.
wxWidgets drives some of this problem, it blindly calls SetValue and invokes the win32 update position messages on all the scroll subevents and we end up fighting it as well by inserting the rounded position on each subevent rather than the final one
Also fixes a bug where an empty window would get left when loading
a file from the KiCad manager window errored out.
Also fixes a bug where we were getting the wrong exception because
we were rethrowing the type-casted one (rather than just calling
throw).
Fixes https://gitlab.com/kicad/code/kicad/issues/8604
It's tempting to say that we don't need to exclude filename chars
from symbols, but we might regret that decision down the road. Better
to just escape them.
Fixes https://gitlab.com/kicad/code/kicad/issues/8694
This allows us to avoid the monospaced font (along with the tab-stop
handling), and process a <return> as an OK rather than just <shift> +
<return>.
Fixes https://gitlab.com/kicad/code/kicad/issues/8425
(The current one keeps pulling the Kicad Manager window to the front
on OSX.)
I also removed the UpdateUI stuff which was probably causing:
Fixes https://gitlab.com/kicad/code/kicad/issues/5049
wxString::Format is redundant in a wxLogXXX call.
Error messages should generally be translatable.
Error messages should use generally consistent sentence forms.
- On wxGTK version < 3.1, the filename must be quoted if containing spaces,
and can be always quoted.
- On wxGTK version >= 3.1, the filename must *never* be quoted because
a quoted filename breaks wxLaunchDefaultApplication().
Fixes#8670https://gitlab.com/kicad/code/kicad/issues/8670
The max-char-width impl was buggy and never applied to PCBNew anyway.
Plus the stroke font has a max-char-width of 2.8 time the space width,
so it made for really wide tab spacing.
Also fixes a bug where the Scintilla editors weren't getting a
monospace font on Mac. (This bug may also exist on the other
platforms, but each would need its own fix.)
Also moves more of the Scintalla customizations to SCINTILLA_TRICKS
where they can be shared.
Fixes https://gitlab.com/kicad/code/kicad/issues/8666
Seth Hillbrand
Jeff Young
jean-pierre charras
Marek Roszko
Jon Evans
Mikolaj Wielgus
Mike Williams
Tokita, Hiroshi
Roberto Fernandez Bautista
Wayne Stambaugh
Michael Kavanagh
qu1ck
Albin Dennevi
david-beinder
Ian McInerney
Pradeepa Senanayake
Mika Laitio
luz paz
Thomas Pointhuber