126914859a
Use correct pad to die lengths in DP length tuner.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12859
2022-11-13 21:07:09 +00:00
348c3d4216
Fix an incorrect calculation in length tuning tools.
...
MEANDER_PLACER_BASE::lineLength wasn't calculating the length correctly
when starting and ending pads were on different layers.
Naturally, now jointA corresponds to the start of the path, jointB to the end.
Fixes https://gitlab.com/kicad/code/kicad/issues/12881
2022-11-12 13:11:27 +00:00
63f937db85
Don't use drag origin for real drag events.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12763
2022-11-09 13:09:31 +00:00
a03799c61e
Don't mark collisions on dragged items, only things they collide with.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8965
2022-11-05 21:54:33 +00:00
a0105efc0c
router: major rewrite of shove/walkaround single line placement. An attempt to fix most router blockages/non-45 stray segments and simplar stuff. Also adds a ton of debug geometry cruft.
...
fixes: 12258
fixes: 12067
fixes: 10807
fixes: 10632
2022-10-31 11:38:31 +01:00
70bca1b2d5
router: allow caller to override the 'safety' length limit in WALKAROUND
2022-10-31 11:17:32 +01:00
363d606503
router: improved heuristics in via force propagation algorithm
2022-10-31 11:17:32 +01:00
1ddabd4eaf
router: some extra debug geometry dumps in SHOVE
2022-10-31 11:17:32 +01:00
165b5257e8
router: temporaily disable upper corner count limit constraint in the OPTIMIZER which prevents almost any optimization of shoved lines
2022-10-31 11:17:32 +01:00
e80bdf934a
router: add via force propagation iteration limit as a user-controllable parameter in ROUTING_SETTINGS
2022-10-31 11:17:32 +01:00
247922ca2d
router: LINE::SetShape() should update the attached via position with the last point of the new line shape
2022-10-31 11:17:32 +01:00
3e67b42efd
router: fix another corner case in LINE::Walkaround
2022-10-31 11:17:31 +01:00
65507e7186
router: extend dump format to support automatic regressions tests of interactive routing scenarios
2022-10-31 11:17:31 +01:00
01b4c20c94
Router only owns message panel when routing.
...
Also fixes a pair of copy/paste error not caught earlier.
Fixes https://gitlab.com/kicad/code/kicad/issues/12780
2022-10-28 22:51:43 +01:00
c026c3af7b
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12753
2022-10-25 18:28:31 +01:00
5fe5534822
Clean up layer handling and normalize to remove magic numbers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12747
2022-10-25 12:31:47 +01:00
2dec37f806
We must check clearance on all layers of multi-layer items.
...
(One layer may have a custom rule.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12733
2022-10-24 00:14:12 +01:00
d16b23d16e
Name shortening and line-break reduction.
2022-10-21 18:41:39 +01:00
6fd195c389
Use comma to separate diff pair nets/netclassse rather than /.
...
("/" is problematic because it's more likely to appear in netnames.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12592
2022-10-21 00:05:11 +01:00
e3842514e7
Move courtyard collision setting to preferences.
...
Also cleans up PCBNew/FPEditor edit options panel to be more in sync
with each other.
2022-10-19 11:33:11 +01:00
413fd82813
Re-entrancy guard for router tool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12604
2022-10-17 13:21:07 +01:00
3e53426b6c
Use same ratsnest colours in the router as the rest of KiCad.
2022-10-16 22:21:14 +01:00
6357c83a8c
Debug code to try and catch Undo/SyncWorld mismatch.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12640
2022-10-14 13:25:25 +01:00
07d9671126
Repair unbalanced UndoRedoBlock call.
2022-10-14 11:44:04 +01:00
b01bf081d8
Cleanup.
2022-10-14 11:12:25 +01:00
de5980b92e
Share more of the courtyard collision highlighting code.
2022-10-14 10:42:07 +01:00
11dc5424cb
Pull interactive courtyard checker out of move tool to share with router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-14 00:48:37 +01:00
3090363cd5
Copy via flags down to the level the router consumes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12591
2022-10-13 17:41:42 +01:00
08260661b8
Force flashing when generating SOLIDs.
...
We only have a single SOLID per pad, so the solid's shape must always
be the flashed shape and then we can do layer-specific flashing tests
internally.
Fixes https://gitlab.com/kicad/code/kicad/issues/12458
2022-10-13 13:05:51 +01:00
b2f05c758b
We don't always have a line when dragging.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12612
2022-10-10 11:44:17 +01:00
ea6fb84351
Formatting.
2022-10-10 11:44:17 +01:00
d6f1d5da76
Start-routing list needs to be a white list, not a black list.
...
We check the collisions later in the same routine, which is where all
the black-listed objects come in.
Fixes https://gitlab.com/kicad/code/kicad/issues/12595
2022-10-07 18:18:02 +01:00
bc58480e24
Missed some other uses of m_startItem in previous commit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12592
2022-10-07 14:01:46 +01:00
cbb997a3b5
Use GetCurrentNets(), not m_startItem for message panel updates.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12592
2022-10-07 10:34:11 +01:00
40ad5b6de3
Broaden reset-sizes-after-layer-switch algorithm.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12576
2022-10-06 15:50:22 +01:00
d8a3ba7917
Update router sizes when switching layers.
...
We may have layer-specific rules involved. Note that at some point
we also need to do something similar on every "fix route" step to
handle area-specific rules.
Fixes https://gitlab.com/kicad/code/kicad/issues/12576
2022-10-05 16:45:42 +01:00
b4f3390626
Drill size is absolute
...
Use hole plating size for visibility only, not zone filling, routing or
DRC
2022-10-04 09:52:40 -07:00
7be05e9eb1
Make sure we have nets before grabbing the first.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12554
2022-10-01 13:50:26 +01:00
ba6afafc86
Router Tool: get rid of getNearestRatnestAnchor
...
Unused now that the PNS Router handles the actions that needed it.
2022-09-28 13:29:52 +00:00
6252840abd
PNS/Router Tool: Refactor Continue From End
2022-09-28 13:29:52 +00:00
1be0deb58f
PNS/Router Tool: Refactor Finish Route
2022-09-28 13:29:52 +00:00
b1f2273bc6
PNS: Add CurrentStart() to placers.
2022-09-28 13:29:52 +00:00
1683e552f7
Add/fix some variable initializations
2022-09-25 00:48:38 +01:00
fdb97a46c1
Don't copy items in for loops when not needed
2022-09-24 03:46:06 +01:00
64a6fc0fd4
Push UNITS_PROVIDER down into a low-level mixin.
...
This allows us to also construct cheap UNIT_PROVIDERs for specific
tasks when necessary.
2022-09-19 17:10:59 +01:00
9304607624
TOOL_EVENT: make command string non-optional
...
We're getting segfaults in places where this isn't checked. Also, add
some asserts so we can catch bad tool push/pop.
Removes all uses of GetCommandStr() and makes it private.
2022-09-19 10:23:09 -04:00
45d6b4a9fc
Readability improvements.
2022-09-19 11:18:20 +01:00
b00178adb3
Nuke base_units from orbit
2022-09-16 04:38:10 +00:00
1a023f5dd0
PCB Editor: (Auto)Route Selected (From Other End)
...
3x Selection-Based Routing Tools. Takes a selection of routable objects
and routes them one at a time individually, with an attempted finish, or
from the other end, depending on the action given.
2022-09-13 15:06:36 +00:00
dc20e24c4a
Route Other End: Perform Steps in one Undo Commit
2022-09-13 15:06:36 +00:00
82f8cd72a3
PNS Router IFACE: Add board commit mode control
2022-09-13 15:06:36 +00:00
cc4e34ef49
Don't sync the world twice in inline router tools.
...
Activate() already clears and syncs the world via PNS::TOOL_BASE::Reset,
so there's no need to sync in InlineDrag and InlineBreakTrack.
2022-09-10 20:49:30 +00:00
fa3e9efdce
PCB Router: return to original active layer after routing
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12313
2022-09-06 10:51:46 -04:00
68f71e4a62
PCB Router: Pressing V again can untoggle Via
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12315
2022-09-06 10:51:46 -04:00
7c83c78afe
Allow free pad usage in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11730
2022-09-06 13:59:52 +01:00
156755e9db
Allow processing of non-handled events in length tuner tool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11425
2022-09-05 10:57:07 +01:00
895a8a8dbc
Work around focus issues for status popups.
...
Autoscroll wasn't working on Mac because the status popup's panel
has the focus. This *may* also fix a problem on MSW of the auto-scroll
not being cancel-able.
Fixes https://gitlab.com/kicad/code/kicad/issues/11425
2022-09-04 21:08:01 +01:00
9405817a4d
Improve contrast of status popup text on Mac.
...
Also works around an issue where GetBackgroundColor() returns black
(with a 40% alpha) on Mac.
2022-09-04 21:08:01 +01:00
c30a557810
ADDED netclass assignment from PCB canvas.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5975
2022-09-03 19:29:59 +01:00
c15a13963b
Fix Build error: AddLine doesn't exist anymore
2022-09-02 11:17:28 +02:00
22f96bfd11
Re-route m_last_head after routing fails
...
This should ensure the shove state gets reverted
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9023
2022-09-02 09:41:15 +02:00
b736460e71
Move optional access from value() to *operator
...
`value()` throws. Where we check for existence, we don't need to use
the throwing version and should just use the unprotected variant
2022-08-30 13:59:39 -07:00
91fbb5c957
Don't prevent immediate actions while router active
...
Immediate actions that can take place are useful. We should only be
preventing immediate actions while actively routing or dragging
Fixes https://gitlab.com/kicad/code/kicad/issues/12311
2022-08-30 10:31:29 -07:00
2ff6a6aee1
Implement and enable option to not shove vias during push & shove routing
2022-08-29 17:32:39 +00:00
7baa56528a
Make sure via-gap-same-as-trace-gap gets turned off for board settings.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12236
2022-08-26 13:22:57 +01:00
f1261e71d4
Replace boost::optional with std::optional
2022-08-25 15:50:47 -07:00
aa2ad3b44c
Move KICAD_T[] to std::initializer_list<KICAD_T>.
2022-08-20 10:28:11 +01:00
46df421064
ADDED defined pad groups for net-tie footprints
...
Each pad group is allowed to short nets with other pads in its group.
Legacy footprints with the "net tie" keyword hack will get a single
group auto-created with all the footprint's pads in it.
DRC and the router now allow a track to collide with copper graphic items
while entering a net-tie pad as long as the closest point in the collision
is within the pad.
DRC (and the footprint checker) now check for copper items in the
footprint shorting pads which are not in the same pad group.
Fixes https://gitlab.com/kicad/code/kicad/issues/2265
2022-08-19 18:54:20 +01:00
f06e28b7a7
PCB: Finish Route, Route From End
...
Adds restart routing from other ratsnest' end and automatically finish
routing.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/5051
2022-08-17 03:15:46 +00:00
a9536b5de9
CHANGED netclass assignments now done via canvas or via patterns.
2022-08-14 22:56:29 +01:00
1ce8fc1614
Ensure arcs are handled in topology
...
Use the connection-independent `Anchor()` function to get connection
points for either arcs or segments in topology. This allows the
ratsnest to be correctly drawn between nets with arcs
Fixes https://gitlab.com/kicad/code/kicad/issues/12205
2022-08-12 20:07:28 -07:00
96f01d33c8
Performance improvements.
...
1) Move a bunch of std::map's to std::unordered_map to get constant-time
look-ups
2) Lengthen progress-reporting intervals to spend more time doing work
and less time talking about it
3) Reverse order of SHAPE_LINE_CHAINs in thermal intersection checks to
make (much) better use of bbox caches
4) Don't re-generate bboxes we already have
5) Fix some autos that weren't by reference (and were therefore copying
large datasets)
6) Rename delta progressDelta so it's easier to search for in future
7) Get rid of a few more autos (because I don't like them)
8) Pass large items to lambdas by reference
Fixes https://gitlab.com/kicad/code/kicad/issues/12130
2022-08-03 11:59:42 +01:00
76b9e25143
Cleanup unused code
2022-08-02 08:33:59 -07:00
e0b3f6c258
PNS: Handle via-in-pad distances when tuning
...
Tuning with a via in pad, the via isn't a part of the full line. But we
still need to account for the line length distance of the
starting/ending vias. To do this, we simply measure the height from
the ending track to the ending pad and starting track to starting pad
(cherry picked from commit 82e8e38054
2022-08-01 20:25:17 -07:00
17fdb7c6a8
Prevent drag index from exceeding full line count
...
Simplification removes segments, so we might lose our valid index.
Ideally, we would simplify during the assembly or pass the input index
to the simplify routine to maintain the proper value.
Fixes https://gitlab.com/kicad/code/kicad/issues/12137
(cherry picked from commit 6c617d84ca
2022-08-01 08:58:28 -07:00
f41af10007
Clean up hole shapes for safety (smart pointer) and consistency.
2022-07-22 23:06:07 +01:00
16e3d40552
ADDED: Display calculated clearance in status bar
...
In addition to showing resolved clearance, we also show the calculated
clearance in the same method as is used for DRC. This will allow users
to better examine their system while working.
Fixes https://gitlab.com/kicad/code/kicad/issues/7934
2022-07-21 15:44:48 -07:00
e558893851
router: use actual snap point position for routability checks of a segment instead of the segment endpoint(s).
...
Explanation:
- place a long segment A with something violating the rules close to its endpoint
- try to start routing in the 2/3 of the length of A (on the obstacle side)
- bummer - the router picks the nearest endpoint of A for the collision check (even though we don't care about this collision since we want to route far away from it)
2022-07-21 16:30:28 +02:00
a9a5136c1c
Always allow blind/buried/micro vias
...
Removes a nanny setting that prevented the use of
blind/buried/micro-vias without a checkbox. If the designer does not
want microvias in their board, they simply do not place microvias.
2022-07-12 19:47:31 -07:00
3d1d432c5e
PCB Editor: re-add missing color to dynamic ratsnest
2022-07-12 19:36:51 -04:00
664bf1382d
PNS: Fix IsLineCorner logic
...
Handle segment width test in the case of locked segs
Fix logic failure where vias on path cause crash
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11990
(cherry picked from commit 2512375988
2022-07-12 02:49:24 +00:00
e122dc38bd
Add context menu item for clearing net highlighting.
...
In selection tools, drawing tools, router tool, line_wire_bus tool.
Fixes https://gitlab.com/kicad/code/kicad/issues/11920
2022-07-10 17:15:20 -06:00
b8479bf6f1
Handle severity ignore rules in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11609
2022-07-09 11:24:47 -06:00
0cb5abd7f7
Fix highlight on route again
...
Added a clarifying comment that will hopefully keep the required code
block in place
2022-07-08 20:14:46 -07:00
3111b7679d
router: bring back the snap-to-hull behaviour in Mark Obstacles mode
2022-07-03 23:59:27 +02:00
f48ed79039
Rely on DRC rules when items might overlap.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1790
2022-06-29 13:43:44 -06:00
833dc70bff
Add edge-exclusions to router (for castellated pads).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1790
2022-06-27 15:16:37 -06:00
f5fe1d5462
router: another attempt at improving 'kink' robustness of the hull generator
2022-06-09 20:51:21 +02:00
56df462474
router: fix SegmentHull() corner case when it 'chamfers' more than the clearance permits (corner case for 0-length segments, which we use
...
for representing holes)
2022-06-09 00:33:08 +02:00
990281a897
router: use either copper or hole clearance, whichever is larger, when checking track -> hole collisions
2022-06-09 00:31:47 +02:00
4192c0a709
router: move IsFlashedOnLayer to the IFACE_BASE class so that it can be used in the debugger tool
2022-06-09 00:30:57 +02:00
bcfe12ce47
router: improvements in robustness of SegmentHull()
...
- ensure the 'chamfer' radius and clearance is rounded before computing the actual hull vertices
- for small, non-45 degree line segments (present in many boards), generate a slightly larger but still axis-aligned 45 degree hull instead of following exactly the segment direction
2022-06-08 14:28:31 +02:00
e90ab055b9
router: remove unused LINE::Is45Degree()
2022-06-08 14:28:31 +02:00
30fb298ed3
PNS: Re-enable hole clearance for non-flashed pads/vias
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11098
2022-06-07 19:49:38 -04:00
23596812b6
PNS: Implement HoleHull for VIA
2022-06-07 19:49:38 -04:00
9f38fa43cd
Fix some minor compil and Coverity warnings.
2022-06-05 11:44:49 +02:00
3747369aaa
PNS: Remove offsets from hull generation
...
This is likely an old workaround to numerical precision issues
in the DRC system that no longer exist. Removing this is necessary
for "exact" hull generation to produce walkaround results that
look nice (paths falling exactly on the grid lines)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10710
(cherry picked from commit 5d4e2aa595
2022-06-04 00:04:03 -04:00
9a2950cca1
PNS: Use exact hulls for walkaround path generation
...
When we generate hulls, by default we subtract the clearance epsilon
to prevent false collisions in the router that wouldn't be flagged
by DRC. However, we need to use the actual hull with no epsilon
when generating hulls for pathfinding in the walkaround system.
Without this change, it is possible for the walkaround to generate
a valid-seeming path that results in a DRC violation, for example
when dragging a drag against a board edge.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10536
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11365
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10710
(cherry picked from commit 2a91ba35c1
2022-06-04 00:04:03 -04:00
c8b93c39b6
router: remove some old cruft from the WALKAROUND class
2022-06-03 23:28:41 +02:00
0bd7f603a3
router: consider mouse drag event a valid route start/end event
...
L-clicks during routing operation while the mouse is moving (even slightly) were ignored, which was annoying to some users (myself included). Now the router
always fixes the track upon mouse click.
2022-06-03 23:28:41 +02:00
eaee610fd9
router: save project settings together with the debug log
2022-06-03 23:28:41 +02:00
f73acbb206
router: derive VIA class from LINKED_ITEM interface
2022-06-03 23:28:41 +02:00
cab08f859a
router: cluster extraction should only consider objects that are touching (instead of checking clearance)
2022-06-03 23:28:41 +02:00
297c60923e
router: return routing status from ROUTER::Move()
2022-06-03 23:28:41 +02:00
54f4f765b9
router: NODE|ITEM::QueryColliding() now can override clearance
...
Needed for clustering algorithm (to be committed later... ;-)
2022-06-03 23:28:41 +02:00
aca9cce5d5
router: more verbose debug messages for the debugger tool
2022-06-03 23:28:41 +02:00
2a0accd184
router: shove algorithm now considers cases where a small via sits 'inside' a fanout of wide (width > via diameter) segments.
...
The shove algorithm can't move the loose track ends. It always needs a via. In case of wide segments stitched with
a small via, the collision search finds only colliding segments and does not consider the via. This leads to frequent shove falilures
or 'choppy' behaviour when the head line only slightly overlaps with an end of a thick trace. This patch attempts at improving this behaviour
by considering the 'tiny via in wide segment' case explicitly.
2022-06-03 23:28:41 +02:00
08647bf035
router: temporarily disable via hole clearance check in the shove algorithm.
...
- needs refinements and additional checks for corner cases.
- disabled also to facilitate debugging of other shove bugs
2022-06-03 23:28:40 +02:00
8cb65a8a13
router: default values for LOGGER::Log()
2022-06-03 23:28:40 +02:00
752ba2ed76
router: log via toggle events
2022-06-03 23:28:40 +02:00
a4ad47cd08
router: use SHAPEs and PNS::ITEMs only in the ROUTER_PREVIEW_ITEM
2022-06-03 23:28:40 +02:00
b08280d00c
router: enable Hole Clearance rule only in Mark Obstacles mode
...
(it will be brought back to Walk/Shove modes as soon as all the underlying issues are fixed)
2022-06-03 23:28:40 +02:00
40593930d0
PNS: Fix off-by-one in dragCornerInternal
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10919
(cherry picked from commit 8d8f96b094
2022-06-01 21:13:05 +00:00
6fd14ac945
[PNS] Fix invalid assumption in IsLineCorner
...
(cherry picked from commit a4aa447b95
2022-05-31 20:24:54 -04:00
9470bd15a1
PNS: Fix skew calculation with pad-to-die specified
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11710
(cherry picked from commit 53dbd3bb02
2022-05-31 20:24:54 -04:00
f2fc78f380
Don't copy modifiers to prime events.
...
The modifiers go with the hotkey, not with the action.
Fixes https://gitlab.com/kicad/code/kicad/issues/11618
2022-05-16 13:51:40 +01:00
a54bbfe12b
Honour prime-event-location when starting router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11239
2022-03-29 13:44:40 +01:00
7b2d9dfc0c
Fix some Coverity uninitialized scalar variable issues.
2022-03-24 13:17:07 -04:00
4225f92573
Slight improvements to via drawing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8717
2022-03-16 14:56:32 +00:00
ec5b7a57ec
Consistency in via dimensions terminology.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11024
2022-03-03 22:40:18 +00:00
adace996f4
qa/pns: refactored the P&S debug tool:
...
- factored out 'business' code from the UI code
- moved to the new DEBUG_DECORATOR interface
- UI-less log file and log player classes as a step towards P&S unit tests
2022-03-03 01:02:00 +01:00
45f7cf9571
router: rework the DEBUG_DECORATOR a bit:
...
- support for dumping complete PNS::ITEMs and generic SHAPEs
- support for log nesting levels
- wxT-ized strings
- more verbose output where needed
2022-03-03 01:02:00 +01:00
4d6c2e4868
Update end item before moving on track/via change
...
The move even dereferences m_enditem for logging and perhaps other
actions. We need to ensure that the end item has not been invalidated
before taking this action
Fixes https://gitlab.com/kicad/code/kicad/issues/10732
(cherry picked from commit 901c330478
2022-03-02 09:23:15 -08:00
639fdb915a
Implement real layer test for visibility.
2022-02-24 21:32:43 +00:00
f076d07e9e
Fix asserts.
2022-02-24 18:16:45 +00:00
f18aae679c
Use router to update message panel when routing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10068
2022-02-20 16:50:30 +00:00
a2ca8cf413
Improve SNR.
2022-02-12 18:38:11 +00:00
8dcc933fc3
Don't use bounding box cache during insideArea.
...
For starters we can't rely on it having been updated, but we also
cache the entire result so there's no huge cost-savings anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/10821
2022-02-12 18:38:11 +00:00
0a5ddb8d40
Add some vector reservations
2022-02-05 21:12:29 -05:00
b2e3f03222
More wide-string declarations.
2022-02-05 22:03:04 +00:00
92dc06ac9d
Don't convert KIID on the fly
...
Converting to string on save prevent unneeded ops
(cherry picked from commit 901685f01b
2022-02-03 10:35:31 -08:00
803675195d
Be more diligent in preventing drag line errors
...
They can happen even when there are no collisions, so we need to reset
the 'ok' flag before using the line again.
Fixes https://gitlab.com/kicad/code/kicad/issues/9555
(cherry picked from commit 833ce19221
2022-01-31 16:13:53 -08:00
5739505aa3
TextBoxes for PCBNew.
2022-01-31 20:00:47 +00:00
ad84b62b63
Prevent multiple single-point line solutions
...
Suggested by @rivimey, we test the case where both lines return singular
point lines and prevent them leaking into our drag solution
Fixes https://gitlab.com/kicad/code/kicad/issues/9555
(cherry picked from commit 38a4894d92
2022-01-29 07:07:29 -08:00
7277fd6218
Don't allow degenerate lines in dragger
...
If walkaround returns an invalid line, don't consider it for a track
Fixes https://gitlab.com/kicad/code/kicad/issues/9555
(cherry picked from commit 8ae304dcca
2022-01-28 15:19:06 -08:00
441e5fd486
router: don't reject non-45 degree lines in the LINE_PLACER
2022-01-22 00:28:11 +01:00
ce28525172
router: include arc approximation tollerance in arc hull clearance calculation
...
fixes: https://gitlab.com/kicad/code/kicad/-/issues/10470
2022-01-22 00:28:11 +01:00
14006495d5
Angle cleanup.
2022-01-20 22:35:41 +00:00
e61144d45a
Finish with EDA_ANGLE.
2022-01-16 21:15:40 +00:00
e84c574830
Some more EDA_ANGLE cleanup.
2022-01-16 19:16:18 +00:00
1539fa5af2
Move SHAPE_ARC to EDA_ANGLE.
2022-01-16 01:19:45 +00:00
07013d00e1
More EDA_ANGLE.
2022-01-14 16:08:19 +00:00
abd3f5bc2b
Move footprints to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
d485eb2514
Move pads to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
eac1936303
PNS: Do not clear layer pairs when importing new sizes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10225
(cherry picked from commit 20bbf9b179
2022-01-13 20:38:08 -05:00
3011ae1d51
PNS: Do not allow smart pads when in 90-degree mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10386
(cherry picked from commit cf4d46b24d
2022-01-13 20:38:01 -05:00
79fe0bf456
router: use VIA::PushoutForce() for via push force calculation in the shove algorithm
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10317
2022-01-13 00:43:27 +01:00
4d0a317e3d
router: fix via force propagation for vias where hole clearance > copper clearance
2022-01-13 00:42:50 +01:00
eb58d7e44c
Text glyph caches and bug fixes.
...
1) Unify metrics between stroke and outline fonts
2) Unify handling of rotation and mirroring
3) Bug fixes in collision handling
4) Use of VECTOR2I (instead of VECTOR2D) for world-coordinates
5) Generate outline font overbar with rounded ends and fix rotation
bugs
6) Generate wxEVT_CHOICE events from FONT_CHOICE::SetFontSelection
7) Change text-item PNS SOLIDs to use compound shapes
2022-01-08 16:47:45 +00:00
72340fcee2
Implement router and DRC collisions for outline fonts.
2022-01-08 16:47:45 +00:00
Alex
Jeff Young
Tomasz Wlostowski
Seth Hillbrand
Mike Williams
Ian McInerney
Mark Roszko
Roberto Fernandez Bautista
Stefan Hamminga
Jon Evans
jean-pierre charras
Wayne Stambaugh