This allows a const BITMAP_BASE to expose const image
data. This is currently done with const_casts, which is
"OK", only as long as the source image is not declared
const, in which case it's undefined behaviour.
Also immediately dereference the pointer to a reference
if it's not checked to make the non-null requirements
explicit at the point of access.
Both versions of EDA_DRAW_FRAME::isBusy have a useless const_cast.
GetScreen() const returns a non-const SCH_SCREEN already, it doesn't
need to be cast, and it's stored in const SCH_SCREEN anyway.
This is useful when working on code paths that rely on KiWay
communications, since you can run and debug the kicad application
without needing to run an install task first.
In OpenSSL 1.1.0 and newer, the locking callback macros do nothing.
This causes unused warnings for the static function lock_callback.
Ignore this function on newer OpenSSL builds, but keep
the infrastructure for now.
When OpenSSL's min version is 1.1 or greater, all the locking
infrastructure can be removed.
Prevent a divide-by-zero bug in SHAPE_ARC::ConvertToPolyline.
When the radius is zero, just use the initial angle (it makes
no different anyway, the result is the centre point, which is
the start point.
The wire image undo/redo option required special handling and was only
used in a single location. Replacing with single change handling
reduces the code complexity
Move repeated GAL config reading routines into GAL_DISPLAY_OPTIONS.
THe app-level config is in here already, do the same for the
common config.
This means that the configs are loaded consistently, which fixes
the symbol-chooser preview window, which previously didn't use the
same config routine as other GAL canvases.
Future work could move these functions to free functions that
act on the public interface of GAL_DISPLAY_OPTIONS to avoid
GAL_DISPLAY_OPTIONS having to know about wxConfig and wxWindow.
Fixes: lp:1824524
* https://bugs.launchpad.net/kicad/+bug/1824524
Hash collisions reduce the speed of unordered maps by increasing the
comparison time of underlying values. This implements the inverse
golden ration offset into the x value to ensure that consecutive points
are far from each other in the map.
This allows setting the config dir at build time, providing packagers a
method of controlling where the configuration files are placed.
Fixes: lp:1780601
* https://bugs.launchpad.net/kicad/+bug/1780601
On some platforms like MSVC, NaN prints as "-nan(ind)". This
is a bit needlessly ugly, so print "NaN" on all platforms
consistently.
This fixes a test failure on MSVC.
This allows us to make the various netlist and pcb update routines
more atomic and less reliant on carefully sequenced asynchronous
messages.
This is also a prelude to adding support for footprint testing
without a netlist.
Both Cairo and OpenGL had issues (different, though) with circles that are
thicker in line width than they have radius. This corrects the OpenGL
implementation (radius is calculated to the outer edge) as well as Cairo
(line width needs to be clamped to twice the radius)
Fixes: lp:1822765
* https://bugs.launchpad.net/kicad/+bug/1822765
Statically constructing wxCursors as used for the probe
and tune cursors crashes the qa_eagle_plugin test
instantly.
Fix this by introducing a new class CURSOR_STORE,
which allows to abstract the platform wierdness of wxCursors
and allow the simulator to laziliy init its own cursors
at runtime.
This code isn't properly tested, as these cursors are never
actually used. However, it does allow the eeschema unit test
to run.
Fixes: lp:1781191
* https://bugs.launchpad.net/kicad/+bug/1781191
Bus upgrades: core new connectivity code
Bus upgrades: eeschema integration and modifications
Bus upgrades: eeschema dialogs
Bus upgrades: netlist export
Bus upgrades: file format changes
the filled areas can use a hatch pattern (crossing lines) using square holes.
The zone filler removes too small holes (truncated holes) from hatch pattern.
It avoid to create small holes when a hole pattern is truncated by the filled area base shape.
Introduced by 416e64a334. The code
appears to have been stepped on purpose but this would be incorrect for
most applications. There remains a good deal of cleanup in mathplot
available for the motivated dev.
Fixes: lp:1810311
* https://bugs.launchpad.net/kicad/+bug/1810311
wxPlatformInfo::Get() causes a linker error on Msys2.
Fix this by making common link wx explicitly, rather
than implicity via it's dependencies, which cause
wrong-order linker command lines on windows.
First, add automatic detection of toolkit DPI scaling options. For now, this
is, in order,
* Check the GDK_SCALE option under GTK+ (users can set this to force the scaling)
* Check the value from WX's GetContentScalingFactor(). This will start to work
correctly from WX 3.1 and GTK+ 3.10.
Then, add a user-settable override in the main prefs panel, next to the icon
scaling. This is independent of the icon scaling options.
DPI handling is performed in a standalone class, so they can be shared between
the prefs UI and the OpenGL backend easily. Also means Cairo could use the same
interface in future.
Also adjust the OpenGL grid drawing code to use the computed scale factor,
which avoids over-thick grids in scaled environments (the user can manually
thicken the grid if wanted).
Fixes: lp:1797308
* https://bugs.launchpad.net/kicad/+bug/1797308
Autosave was not working correctly, partly due to different
implementations in eeschema and pcbnew and partly due to a mistaken
refactor at some point during v5 development. This unifies the expected
autosave prefix to _autosave- for both pcbnew and eeschema. It also
unifies the expected suffix for the backup files to -bak.
Fixes: lp:1820433
* https://bugs.launchpad.net/kicad/+bug/1820433
Allows 0 to 4 chamfered corners, not only one.
A custom shape allow this kind of shape. However because it is a primitive,
it is easier to edit and it support thermal reliefs.
Disable the text update event for the orientation cutom value field before
updating it when the radio buttons are selected. This allows to use the
conventional EVT_TEXT handler, rather than KEYDOWN, which has two effects:
* Tabbing though the dialog no longer sets custom orientation
* Click-driven clipboard actions trigger the update correctly.
Introduce a helper function in validators.h to assist in updating
validated fields without triggering further events.
Fixes: lp:1819006
* https://bugs.launchpad.net/kicad/+bug/1819006
wxWidgets has several bugs that result in cell editors being closed
right after they're opened. There are two wxWidgets hacks to
partially address this: the SetInSetFocus() hack, and a slow-click
hack. We used to try and work-around these bugs ourselves for
single-click access, but this changelist moves those over to
wxWidget's slow-click hack.
Fixes: lp:1817965
* https://bugs.launchpad.net/kicad/+bug/1817965
The folder button handler works will for footprint libraries but we
needed a specific class for the schematic libraries as well.
Fixes: lp:1818346
* https://bugs.launchpad.net/kicad/+bug/1818346
Added checks to StrCmpNum() function in common/sting.cpp to prevent
iterating past the end of the sting. Also removed length of string
parameter since it did not seem to be used anywhere.
Fixes lp:1818157
https://bugs.launchpad.net/kicad/+bug/1818157
The cancel action was set for the escape key when editing the fields in
a dialog. But when the action is a button, we need to ensure that the
escape id is set to ANY for processing.
Fixes: lp:1818056
* https://bugs.launchpad.net/kicad/+bug/1818056
For unknown reasons, GTK3 may send resize events when editing grid
fields. This can cause the grid editor to exit, losing the focus and
overwritting the characters at the next input.
We avoid this by filtering the size events when the size doesn't change.
Fixes: lp:1817810
* https://bugs.launchpad.net/kicad/+bug/1817810
Wayland is not yet compatible with wxWidgets (or rather the other way
around). Until this happens, we must force the x11 compositor while
running. Under wayland, this will map to the wayland-x11 compatibility
layer.
Fixes: lp:1816637
* https://bugs.launchpad.net/kicad/+bug/1816637
For BUTTON_ROW_PANEL::BTN_DEF_LIST, the button definition does not need to be
passed by value, by non-const reference avoids copies and this addresses the
Coverity warnings: 184130, 184134, 184140, 184167.
Also use a unique_ptr to clarify ownership sementics when handing widget
over to WX.
In Symbol editor, axis are always shown. However after switching the backend, axis were no longer drawn.
In Cairo engine, fix a bug preventing axis to be shown.
Each dot is an integer number of pixels wide, so supporting 0.5 width
steps no longer makes sense. We round up the existing settings to the
nearest integer and only allow integers in the dialog.
Fixes: lp:1816748
* https://bugs.launchpad.net/kicad/+bug/1816748
Introduce a shortcut method to set tab ordering and use it in
the dialogs that override the tab traversal orders:
* Eeschema sheet properties
* Pcbnew Move exact
* Pcbnew Move relative
Also set some initial focus fields in the same dialogs.
Tidy a few includes.
Fixes: lp:1816009
* https://bugs.launchpad.net/kicad/+bug/1816009
We shouldn't adjust the pixel size of the grid based on alignment in
GAL. This creates artifacts on the screen at different zoom levels.
The pixel width is fixed by grid size preference
Also clean a left-over debug statement
Fixes: lp:1817377
* https://bugs.launchpad.net/kicad/+bug/1817377
A only one char is very hard to translate outside a context, so avoid to use it.
Remove also 2 "FIX ME" lines, now useless.
Fixes: lp:1817354
https://bugs.launchpad.net/kicad/+bug/1817354
Arc pixel adjustment needs to be limited to +/-1 pixel. But making this
adjustment to nearby points and then using the projection to correct the
center point accumulates errors that are large for angles near 0 and
near 360. This is a compromise that aligns _most_ arcs and provides
stable generation for all angles.
Fixes: lp:1817226
* https://bugs.launchpad.net/kicad/+bug/1817226
GTK3 provides for additional input devices via xinput2. These include
touchscreens and continuous scroll devices. But wxWidgets does not have
specialized handlers for these events, so they double up for some
devices. Until wxWidgets allows us to handle these events, we specify
that the input handler should be the old-style GDK_CORE.
GTK3 does a fade in/fade out routine for scrollbars by default. This
was problematic as it caused a cascade of full-screen repaint events on
each mouse event. Instead of disabling scrollbars (which only helped
the full canvas), we force the old scrollbar behavior is environmental
variables.
Revert "gtk3: Remove scrollbars"
This reverts commit db43bd82a7.
And filled but we don't use those yet. No pixel-alignment needed for
stroked semi-circles (I think) as we set the pixel width to be 1
regardless of the zoom level.
Fixes: lp:1816263
* https://bugs.launchpad.net/kicad/+bug/1816263
Pixel alignment is not required for track outline mode. It creates
differences between segment and radius calculations.
Also add specific width of the outlines
This creates early asserts for issues where we haven't fully implemented
a Clone() function for items or haven't correctly filtered them before
creating the undo/redo commit.
gal: pixel alignment for Cairo.
gal: pixel alignment for OpenGL
Cleanup of pixel alignment patches
gal/opengl: more pixel alignment patches:
- works on Retina displays now
- pixel alignment for circles
- correct 1-pixel strokes
- fixed unfinished 1-pixel line ends
GAL: Restore antialiasing options in Cairo
GAL: Fix arc drawing
Removes DrawArcSegment, which drew arcs whose edge was optionally
stroked (a feature that we did not use). Fixes Cairo arc drawing issue
where arcs were not visible in pcbnew.
gal: further cleanup
gal: removed unused shader parameter
The indent size was estimated by the width of characters. But MSW
indent is substantially different from OSX and Linux. It also cuts off
the middle characters rather than the end leading to poor display if the
width does not fit. This uses the system setting for indent to account
for the indent spacing + 'M' to account for the arrow inset.
Fixes: lp:1815401
* https://bugs.launchpad.net/kicad/+bug/1815401
When filtering, we update the width of the displayed column to ensure
the full text is visible to the user. Check is rough, based on line
width (doesn't completely account for differing char widths) but is
sufficient for the approximate difference
Fixes: lp:1815401
* https://bugs.launchpad.net/kicad/+bug/1815401
Fixes: lp:1788495
* https://bugs.launchpad.net/kicad/+bug/1788495
This was previously "svg:g", but the SVG is declared with only
a "default" namespace, not an "svg:" namespace (looks like
xmlns:svg="http://www.w3.org/2000/svg" in the svg tag).
This means you cannot use svg: as a NS in the document. It's not
needed anywaY: the default is already correct.
Moreover, mismatching <svg:g> and </g> is always invalid.
When adding colors to length tuner, we depend on the window background
color, which can be set by the user, resulting in an unreadable text.
This uses the HSL conversion to detect which shade it should use for the
coloring.
Also adds test cases for round-trip HSL and HSV conversion
Fixes: lp:1814530
* https://bugs.launchpad.net/kicad/+bug/1814530
Apparently FinishDialogSettings() does need to be called on windows to
get the dialog to layout properly. Hopefully this doesn't break any of
the other platforms.
Fix wxGrid column minimal widths on Windows in dialogs (just fixing the size is not enough).
WX_GRID::GetVisibleWidth(): make width bigger for labels, because they usually use a bold font.
(However, the fix is just a workaround: a better code is welcome)
When loading a part in libedit, also transfer certain screen
settings to the incoming SCH_SCREEN, from the current
SCH_SCREEN.
Currently, the grid settings are transferred, but this could
also do other settings if needed.
Also remove some duplicate commentary and mention why the
grid is set in a SCH_SCREEN even though the BASE_SCREEN ctor
sets the same default.
Fixes: lp:1815108
* https://bugs.launchpad.net/kicad/+bug/1815108
Some basic tests on LIB_TABLE and LIB_TABLE_ROW that demonstrate
the behaviour of fallbacks and various access methods.
Also add a few LIB_TABLE_BASE comments and changed some NULLs to
nullptr.
Libpolygon can provide its own includes via target_include_dirs PUBLIC.
This means any linking targets do not need to specifiy them manually.
As common requires polygon, the polygon dep is also now no longer
required downstream of libcommon, as it's transisitvely implied
by libcommon's target_link_libraries.
This resolves a circular dependency previously detected and also
simplifies CMakeLists.
The bitmap definitions (BITMAP_DEF and so on) do not
have any dependencies on other libs, including WX. This
means the bitmaps library can be isolated from the other
dependencies.
Common now depends on bitmaps, and libraries that depend
on common can pick it up from the common target_link_libraries,
as it is PUBLIC. This means a lot of targets no longer
need manual bitmap linkage.
This avoids a circular dependency that was previously reported
by static analysis.
Avoiding pulling in WX and other headers into the include
tree of each bitmap .cpp is a huge speed up (around 10x) in
compilation, and the generated static library is also 10x
smaller (20MB vs 200MB)
Add common as a link library to pnsrouter,connectivity.
THese library do still use common code (including bitmaps,
via base_screen.h) and this allows them to pick up the libcommon
includes correctly.
When the user cancels the footprint load, we should assume they are
canceling the placement of a new footprint. This also adds sanity check
when populating the list
Fixes: lp:1814181
* https://bugs.launchpad.net/kicad/+bug/1814181
Uses existing grouping in SVG output. Sets schematic components as a
grouped element in SVG as well as pcbnew elements per layer.
Fixes: lp:1011754
* https://bugs.launchpad.net/kicad/+bug/1011754
This function was incorrectly processing refdeses like "U1000".
Change the algorithm to a simpler STL-compatible one and
update the tests.
Fixes: lp:1813669
* https://bugs.launchpad.net/kicad/+bug/1813669
This breaks the following functions out to a general-purposed refdes utils
header:
* MODULE::GetReferencePrefix()
* kicad_string.h RefDesStringCompare()
This acheives:
* Slimming of MODULE interface
* Placement of refdes code in common rather than pcbnew
** Testing of this code in qa_common
* Tighter and smaller includes for code that only needed refdes functions
Note: there are failing tests commited (as expected failures). These
are the cause of lp:1813669 and will be fixed as a follow-up commit.
This is not logic specific to MODULE. Breaking it out to
kicad_string.h acheives:
* Slimming of the MODULE interface
* Enables reuse of the function
* Enables testing of the function
Also add a test under qa_common for this function.
The CONFIG_SAVE_RESTORE_WINDOW class does not need to be tied
to the array dialog, put it in common/widgets.
Also do a refactor and tidy-up of the the class, use a union for (slightly)
better type-safety and syntax (a variant would be better but that's C++17).
Also enable integral field save/restore from text boxes.
The geometry and numbering logic is separate to the dialog, and
can be separated for clearer logic and better testability.
Moreover, refactor it to avoid any dependency on pcbnew
classes, so it can be move to common for potential re-use in
eeschema and friends in future.
Also convert all wxPoint logic in these classes to VECTOR2I and
fix some function visibilities.
Add some unit tests of the ARRAY_OPTIONS geometry and numbering.
In the event that we do not have a project configuration file, the
default template will be used. But it needs a destination filename for
copy_pro_file_template().
Fixes: lp:1745022
* https://bugs.launchpad.net/kicad/+bug/1745022
When no default library tables are found, set the default wxFilePickerCtrl
to the users configuration path instead of the current project path to
prevent any project library tables from being used as the default.
Fixes lp:1809769
https://bugs.launchpad.net/kicad/+bug/1809769
If user hotkeys do not map all available actions, we still want the most
recent change to be the primary value. This can happen if the defaults
load a set of hotkeys that are not completely overwritten by the updated
hotkey preferences file. We assume that the most recent hotkey is what
the user want to map.
Fixes: lp:1778408
* https://bugs.launchpad.net/kicad/+bug/1778408
Some MSW seem to have issues with the UTF-8 characters in const
wxString. This explictly casts to wxString from UTF-8 handling the
platform differences
Fixes: lp:1813329
* https://bugs.launchpad.net/kicad/+bug/1813329
Introduce the concept of a DRC_PROVIDER which allows
to separate the various DRC functions to their own
areas. This allows, amongst other things, a slimmer core
DRC class, and allows DRC functions to be separately testable.
The courtyard DRCs (overlap, missing and malformed)
are the first victims, so instrumentation can be added to this function.
Add some unit tests on this DRC function, as well a few re-usable PCB-based
utility functions in a library (qa_pcbnew_utils) that could be shared between
unit tests and other utilities.
When creating the zone cutout, we delete the old zone and add a new one
with each cutout. This requires resetting the source zone and clearing
our previous selection if we would like to continue using the cutout
tool on the new zone.
Fixes: lp:1812339
* https://bugs.launchpad.net/kicad/+bug/1812339
When prompting for a new footprint library, we need to treat the input
as a file for creation rather than a directory for selection.
Otherwise, users cannot specify the name of their new footprint library
independently of the existing directory names.
Fixes: lp:1812135
* https://bugs.launchpad.net/kicad/+bug/1812135
Factor out common dialog code from global symbol library table dialog for
loading initial library table.
Update global symbol library table code to user factored out common dialog
code.
NEW: By default a clipboard is pasted to a grid starting from the
cursor position and doesn't matter is a selection of cells present or
not. Often a grid represents the data of a few similar objects like
components, for example. Some number of cells (fields) may have the same
value for a few rows (components). In this case, when filling data we
must copy the range of identical cells from the first row of similar
components and then paste it to every row of the rest components (by
default). From now it may be done easier. We must copy the range of
identical cells from first row of similar components (here is no
changes) and then select rectangular range of cells (for multiple rows)
where must be placed copied data. After pasting copied cells will be
pasted to every selected row.
So in general, we can copy cells from one row and paste it to multiple
rows at a time.
This new feature also makes possible to copy value from one cell and to
paste it to all from the selection.
If copied range of cells is larger than the selection then only the part
of clipboard that matches the selection will be pasted.
CHANGED: By default dialog closes on Esc key immediately and if dialog
has a grid control there is no way to close a cell editor with canceling
changes. New behavior is next: if dialog has a grid and the grid has an
active cell editor Esc key closes cell editor, otherwise Esc key closes
the dialog.
CHANGED: On pasting multiple rows from a clipboard to the end of a
grid, the grid is automatically expanding (appended needed number of
rows). In general case the grid expanding on pasting is inappropriate.
Rows must be added by tools like a button or a menu command etc. In some
cases rows cannot be added at all. So we must paste only the part of
the clipboard that fits between the cursor position and the end of the
grid without a grid extending.
CHANGED: First click sets a cursor to the specified cell, second click
activates editor (current realization, where first click activates cell
editor, is very buggy especially with cells selection).
Set cursor on cell of reference on mouse left click in Fields editor of
Eeschema.
When removing steiner points, there is the possibility that the test
point is also removed. In this case, it is no longer a member of the
linked list and will break the output.
The test for re-fracturing a broken polygon can also result in multiple
polygons, rather than only 0 or 1. Skipping the extra polygons will
result in a limited tesselation.
Fixes: lp:1812393
* https://bugs.launchpad.net/kicad/+bug/1812393
The config was saving a canvas type EDA_DRAW_FRAME member not always accurately initialized.
And the last canvas opened frame setup was saved, not necessary a frame having a canvas type that can be set by user.
This is a broken feature especially because the footprint viewer has a fixed canvas setting.
The canvas type might change without the frame being notified. If this
happens, the user is presented with repeated notifications of OpenGL
issues. Howver, switching canvas is not an error and should be
presented to the user as an info message to clarify that the system is
still working but it has changed how it renders the screen.
Fixes: lp:1795240
* https://bugs.launchpad.net/kicad/+bug/1795240
Misuse of __WXWINDOWS__ for checking the presence of Windows. The correct
macro is __WINDOWS__ or __WXMSW__ in GUI programs.
__WXWINDOWS__ is always set, on all platforms.
Use the AddFileExtListToFilter() to also generate the
wildcard for "all files". This is because:
* Users can use AddFileExtListToFilter for the all files WC
with the same interface as for any other extensions.
* Users do not need to worry about wxGetTranslation, as the
_() is applied in the same way as the other *Wildcard() helpers,
and it is a function just like the others, so it is consistent
* There is a testable interface to document the expected result.
The test is added.
Varargs make it very hard to pass strings in flexibly
when they (and the number of them) are not known
at compile time.
For example, this allows up to now amalgamate the "single
ext" and "multiple ext" unit tests.
The application warps the cursor when initiating some actions (dragging,
selecting modules or Find and Move). This warping should not also
trigger the autopan action.
Fixes: lp:1810787
* https://bugs.launchpad.net/kicad/+bug/1810787
The standard DIM() macro was not typesafe as it happily deferred errors
to runtime that can be caught at compile time. Replacing it with a
generic C++11 constexpr allows for typecasting, comparison and compile
time error checking.
If you use add_custom_command to generate the grammar file,
it can be removed by "make clean". This then means the user will
need to get it back from Git, or regenerate it with Lemon.
Changing to add_custom_command removes the output file
from the clean list. The incantation to rebuild the grammar
remains the same: "make libeval_grammar", and it is still not
required to have lemon installed for a normal build.
Fixes: lp:1809610
* https://bugs.launchpad.net/kicad/+bug/1809610
When at small zoom levels, the integer bbox can overflow, preventing
redraw. We fix this by redrawing the full tree when this happens
Fixes: lp:1733067
* https://bugs.launchpad.net/kicad/+bug/1733067
Bitmaps loaded via wx can contain alpha channels. We utilize underlying
routines to correctly map the alpha. This also standardizes the Cairo
alpha calls to ensure correct display in Fallback for partially
transparent highlights
Fixes: lp:1809845
* https://bugs.launchpad.net/kicad/+bug/1809845
Cairo supports antialiasing when rendering but can be slow when set to
sub-pixel mode. This bumps the minimum version of Cairo to 1.12
(available in 14.04 LTS as well as mingw) to support three antialias
settings (fast, good, best) that offer speed/appearance tradeoffs.
This can provide a higher-quality eeschema render as it works on a
per-element basis as opposed to the OpenGL per-screen antialias.
Currently, GAL is initialised to NONE (i.e. off). This causes
issues when Legacy canvas is broken (i.e. GTK3).
This changes the default to GAL Cairo, both in PCB_EDIT_FRAME
init, and in the config load.
Now, when the user starts with no config, they are prompted for
a choice: OpenGL or Cairo, and one of them will be set up, with
Cairo as fall back.
Users on platforms that still support legacy can go to it as normal
from the menu, but it will not be the default in any circumstance.
Fixes: lp:1809997
* https://bugs.launchpad.net/kicad/+bug/1809997
If a Scroll event is skipped, a default handler is fired by wxWidgets.
This default default handler fires 3 wxEVT_SCROLLWIN_LINEUP or wxEVT_SCROLLWIN_LINEDOWN events.
This is not wanted now in eeschema (and pcbnew) because they add extra (unwanted) scrolling.
Fixes: lp:1810403
https://bugs.launchpad.net/kicad/+bug/1810403
wxChoice centers the selection on GTK. So when switching from a
mid-list item to an item at the top, the list is always cut off for
choice lists located on the top toolbar. Using a combobox provides a
drop-down that allows easier access to all elements in the box.
Fixes: lp:1808569
* https://bugs.launchpad.net/kicad/+bug/1808569
It avoid including these extensions in a translatable string, thus avoid breaking filter
if the translation is incorrect (It happens sometimes).
See wildcards_and_files_ext.cpp for use.
If a page layout contains bitmaps and is used in all sheets of a hierarchy, and in the board editor,
the cross-probing from pcbnew to eeschema invalidate textures associated to these shared bitmaps,
when switching active sheets.
Usually a crash happens after switching or when closing editors.
As a workaround, I disabled bitmaps (therefore associated textures) cache.
Not optimal, but at least it avoid crashes.
The wrong class is called for the ctor of the wxConfigBase - this should
be a wxFileConfig, just like the bare new used to be.
Fixes: lp:1810002
* https://bugs.launchpad.net/kicad/+bug/1810002
This make the use of legacy canvas on GTK3 a default-off
advanced config. Legacy is substantially broken on GTK3
and is of basically no use at all to general users on this
platform.
If the program starts with legacy canvas in the config,
it is forced into a GAL mode, as otherwise it could happen
that the user is stuck and unable to get into pcbnew to change
the setting.
Fixes: lp:1803156
* https://bugs.launchpad.net/kicad/+bug/1803156
This can be used for "advanced" options which are for developers
to use for feature-flags and other configuration. Run time config
has some advantages over preprocessor defines:
* Can be changed without recompilation
* Sensitive to XDG_CONFIG_DIR, so flipping configs is easy
* Better compiler coverage (less conditionally compiled code means
less chance to break a different configuration). Also better
analysis coverage.
* Type safe config params
* Centralised documentation: it's in doxygen, in one place
No advanced config should be required by a general users. If a general
user does use one of these configs, it's probably because:
* There is a bug and one of these configs is a workaround
* A config in here is generally useful and should be moved into the
relevant application config and given UI.
For now, the config is read-only, and is read from the
"kicad_advanced" config file in the normal config dir.
The fracture() call may result in zero polygons remaining, which will
cause failure in our tesselation routine, so we need to check whether
this is a valid POLYGON before re-tesselating.
Tesselation can fail for a number of reasons. When this happens, we set
the triangulationValid flag to false to prevent using the broken
triangulation. This will fall back to the slow OpenGL triangulation
when DrawPolygon is called.
Use TesselatePolygon() to draw polygons in Gerbview instead of GLU tesselation, much slower.
Add helper methods in GAL to know if the current GAL engine is Cairo, OpenGL or something else,
useful to optimize drawing code.
Graphic lines and polygons are drawn to fit specific areas for which it
is helpful to have the endpoint controlled by the cursor even when
constraining the angle.
Fixes: lp:1805502
* https://bugs.launchpad.net/kicad/+bug/1805502
Append the appropriate file extension to the file name if the file name
does not have a file extension. This is a know issue with the GTK+ file
dialog.
Make the last 3D viewer screenshot last file used code more coherent.
Add the 3D viewer main frame trace string to the trace environment
variables doxygen group.
Doxygen comment and other minor code cleaning.
Fixes lp:1804980
https://bugs.launchpad.net/bugs/1804980
Under GTK3, the scrollbars fade in and out, causing a cascade of
re-paint events. These cause KiCad to be unresponsive while the repaint
events occur. By default this is 1s fade in 1s fade out but can be
configured by the user/wm.
Area mapping the repaint events to just scrollbar areas will be a good
solution but until/unless that happens the scrollbars in GTK3 are
problematic.
On GTK+3, the zoom events are smaller and faster, so
the trigger the zoom acceleration.
A simple fix is to use the non-accelerated Mac-style
zooming and an appropriate constant. This can be tweaked
further as needed.
Fixes: lp:1786515
* https://bugs.launchpad.net/kicad/+bug/1786515
GTK3 smooth scrolling is enabled by wxWidgets but not to the exclusion
of normal scroll up/down events. wxWidgets maps these both to the same
scroll handler and will fire them both if they are not handled before
being queued. Testing timestamps allows us to mark and ignore the
dupes.
This is set to GTK3 only for now as it isn't listed as a problem for
other platforms. But it shouldn't cause issues if it is enabled
elsewhere in the future.
The libeval grammar can now be rebuilt with "make libeval_grammar".
This is only possible when lemon is installed.
Also a couple of modifications to the lemon grammar to
account for external changes since the grammer was last generated.
Also move the grammar defines into grammar.h - this is how
Lemon produces them, and by manually copying into the target .cpp,
it make automated regeneration impossible.
This adds a check for contiguous board outlines to the DRC. It also
uses the calculated outline to ensure that traces are not crossing the
outlines.
Fixes: lp:1648055
* https://bugs.launchpad.net/kicad/+bug/1648055
The reduces a little bit of WX dependency, and makes
the timing code a bit more type-safe.
Also adds a more testable interface for the accelerated
zoom controller.
This is done to avoid a big chunk of conditionally-compiled code
in the middle of the event function.
Also separates the zoom logic from the WX_VIEW_CONTROLS object
and isolates it in a separate class behind a clearer interface.
Add some simple tests for sane steps on GTK+3-sized scroll
steps.
This syncs the "All" checkbox with the state of the report options such
that selecting "All" automatically selects the other boxes and
deselecting a box results in the "All" box also being unselected. This
allows a single click filtering of report messages.
Fixes: lp:1796992
* https://bugs.launchpad.net/kicad/+bug/1796992
When the error switching to OpenGL is triggered by the requested switch,
we want to fallback to the cairo GAL renderer instead of the
GAL_TYPE_NONE, which defaults to legacy.
Fixes: lp:1799017
* https://bugs.launchpad.net/kicad/+bug/1799017
This makes using Scrollbars more easy to use, especially for "small" page sizes like A or B.
Note also the working/drawing area size is bigger than the page size (3 times)
This parameter defines the working area (full page) size.
The fix is not perfect, because it does not take in account the page size.
However it is similar to the "old" initialization, before Eeschema GAL.
In Eeschema, a reasonable boundary size is used.
Due to recent changes in legacy canvas code, when starting a block command,
the block outline was not drawn in pcbnew and pl_editor during block definition.
Fixes: lp:1803668
https://bugs.launchpad.net/kicad/+bug/1803668
Factor out save current canvas view to image file code from symbol editor
code so it can be used anywhere.
Add ability to save to any image format supported by wxBitmapType. See
https://docs.wxwidgets.org/3.0/gdicmn_8h.html#a90a1eb6d85b5044a99b706fd979f27f5.
Currently only PNG output is implemented.
Please note that there is a minor bug that appears to be due to the
scroll bars which causes unfilled areas on the right and bottom edges
of the image. This always existed in the save symbol editor view
image but it was not as noticeable because by default the background
color is white. It is very noticeable in the footprint editor with
a black background.
The usual smattering of coding policy and comment fixes.
Fixes lp:1802127
https://bugs.launchpad.net/kicad/+bug/1802127
Due to the implicit floor of the cast from double to unsigned char,
there was a small rounding error in COLOUR4D's WX conversion function.
This fixes the failing tests.
Also make the cast to unsigned char explicit.
This avoids having to manually specify include/legacy_gal
in and legacy GAL targets, and harominizes with legacy_wx.
This also means .cpp files in common/legacy_gal do not
need to specify the legacy_gal subdirectory, so they
will continue to work as needed when legacy_wx is removed.
Display GALs had an incorrect world unit value set. Now the world unit
value says how many internal units are in an inch, in accord with the comments
in the GAL header. Bitmap drawing code relied on the information about DPI,
so scaling worked differently for display and print GALs.
CAIRO_PRINT_CTX provides a Cairo context created from wxPrintDC.
It allows one to prepare printouts using the Cairo library and
let wxWidgets handle the rest.
When reading (and writing) a file, we must switch the current locale to "C" for LC_NUMERIC.
Unfortunately, on Windows, a wxWidgets assert was shown when reading some items (bitmaps images).
This wxWidgets assert (related to decimal separator) is overzealous and is now hidden only when reading/writing files.
Fixes a crash when typing fast in the place footprint filter box.
Also adds a bunch more checking to GAL locking, including making
sure the same person unlocks as locked, and preventing piece-meal
calls (the RAII objects must be used).
The decision to include the TTL library make KiCad a derivative work
under the terms of the AGPL version 3 or later license.
Add both the GPL3 and AGPL3 license text files and add a readme file
about the KiCad licensing. Contributing to KiCad still falls under
the GPL3+ license.
Fixes lp:1797095
https://bugs.launchpad.net/kicad/+bug/1797095
It happens when the char is not found in the font used to display netnames/pad names.
When happens, a wxASSERT is raised.
Unfortunately it can crash the application if it is during a paint event or some critical time.
Linux does not handle the resize command with wide-character extended
table UTF-8. The solution did not work for W7-32bit. This is a
compromise, attempting first the preferred, previous solution and
falling back to the secondary solution.
(cherry picked from commit 6106210c87)
Replace all instances of wxLogDebug with wxLogTrace in the common and
kicad folders to prevent unwanted debugging output.
Add new trace flags for locale and screen object tracing.
The usual smattering of code policy fixes.
Invalid wchar characters would throw an exception. We need a defined
output from the += operator, even for unknown character.
Fixes: lp:1798144
* https://bugs.launchpad.net/kicad/+bug/1798144
(cherry picked from commit b37bc69476)
The connectivity files were unwieldy. This separates them logically
into data, algo and items where the items classes are those that hold,
surprise, surprise, the items, lists and clusters.
This prevents deadlocks when exceptions are thrown and the context
ends up not getting unlocked.
It also removes an earlier hack to try and minimize this which
didn't work anyway.
Dynamic casts should only be used when we explicitly check for the
resulting pointer to be NULL. Where we know the class is castable we
can use static_cast, save on overhead and ensure our resulting pointer
is non-null.
Block rotate and mirror now work like they do in Pcbnew (that is
they're treated as part of the block move/duplicate/whatever
rather than finishing it).
Fixes: lp:1780794
* https://bugs.launchpad.net/kicad/+bug/1780794
1) when duplicating don’t keep original hidden until end of drag
2) reset selectionArea when showing it so it doesn’t flash in its previous location
3) center a pasted block on the cursor
4) don’t draw the source selectionArea when pasting a block
5) implement selection-style highlighting for contents of blocks
6) add pasted items to view so they don’t disappear when the block is placed
Fixes: lp:1747197
* https://bugs.launchpad.net/kicad/+bug/1747197
Split antialiasing options out from display options. Move
antialiasing to common. Duplicate the rest of display options
for Eeschema.
Implement OnSelectGrid and hookup GAL canvas refresh to
SetPresetGrid.
Add Grid Settings... to View menu and move Show Grid from
preferences to View Menu to match Pcbnew.
5.0 doesn't set the GAL's line width. It gets away with this since
it's using the same GAL to measure as to set up the drawing, so
the width happens to be set correctly for other reasons. 5.1 uses
a separate GAL and so isn't so lucky.
Note: it's only the renderer that is changed from wxDC to GAL. Tools stay the same, consider this a temporary hack.
This commit splits the EDA_DRAW_FRAME, EDA_DRAW_PANEL and BLOCK_SELECTOR classes into two variants, each independently compiled into a static library.
- "legacy_wx" for PCBnew/Gerbview - wxDC-based legacy canvas. We have full GAL support there anyway so it makes no sense to introduce GAL rendering API to the legacy tools.
- "legacy_gal" for EEschema and the rest - GAL-based legacy canvas, using legacy tools but with a GAL renderer.
Such split ensures only a small part of the common library and eeschema is affected, without messing around with already GALified tools.
The commit also removes some header dependencies on class_drawpanel.h
It would appear that some platforms process the KILL_FOCUS event
after running TransferDataFromWindow(). This change makes sure
that the evaluation is done no matter the order.
Fixes: lp:1793911
* https://bugs.launchpad.net/kicad/+bug/1793911
LC_NUMERIC is the right option to use in LOCALE_IO because only the floating point separator must be modified
When using LC_ALL, the Env var expansion wxGetEnv() was not working when the env var contains non ascii7 codes after a call to LOCALE_IO.
When using setlocale( LC_NUMERIC, "C" ) in LOCALE_IO, wxGetEnv() works fine.
Fixes: lp:1795990
https://bugs.launchpad.net/kicad/+bug/1795990
The '/' and ':' are reserved and cannot be used in symbol or footprint
names. They will cause the LIB_ID parser and formatter to fail. While
it seems like they should be legal in symbol alias names, they will
trigger a symbol rescue the next time the schematic is loaded.
Use ID_SCH as in the Eagle schematic plugin rather than ID_ALIAS to
ensure symbol names do not need rescued the next time the schematic is
opened.
Remove ID_ALIAS since the rules for alias names are the same as the
rules for symbol names. Otherwise, allowing '/' and ':' in alias names
will force a symbol rescue on the next schematic load.
Fixes lp:1795600
https://bugs.launchpad.net/kicad/+bug/1795600
When querying the view, we do not want to including items that are not
on layers that are currently visible. This routine is currently only
used by the selection tool (pcbnew and gerbview) and the grid helper.
Both expected this logic but were indifferent to the additional items.
Fixes: lp:1796403
* https://bugs.launchpad.net/kicad/+bug/1796403
The guard isn't working on GTK (causing eval not to happen on
a kill focus), and I can't remember what issue I put it in to
solve. I've done a bunch of testing and it appears that we
don't need it, although I'm sure I put it in for something....
Fixes: lp:1793911
* https://bugs.launchpad.net/kicad/+bug/1793911
Patch modifies the way graphs are displayed: instead of drawing one
point for each X coordinate, there is a line segment joining min and max
values for continuous graphs and all unique points are displayed for
discrete graphs.
Fixes: lp:1674143
* https://bugs.launchpad.net/kicad/+bug/1674143
Graph rendering takes a lot of time, especially when there is a high number
of points to be drawn. The initial implementation drew all points/lines
even if the the coordinates were duplicates, in the new version duplicated
coordinates are skipped.
Fixes: lp:1674143
* https://bugs.launchpad.net/kicad/+bug/1674143
There are lot of places where constants are used in the KiCad UI
as "magic numbers". The most common one is "5", used in many
wxFormBuilder and manual UI constructions as the margin.
This commit provides a place for all UI to look up shared
constants and other functions, to help create a consistent UI using
functions that provide meaning and intent to these magic numbers.
This is in preparation for making this widget optionally read-only.
Major changes:
* Construct panel in code, not with wxFormBuilder. This make's it
easier to conditionally construct elements that won't be used
in a read-only mode (e.g. the buttons).
* Use a generic "button row panel" widget for the buttons, as the
sizing and layout logic is reusable in nearly all dialogs, and
it's simplifies layout in the higher-level dialog widget. This
widget is one example of many possible "reuable widgets".
Put the cursor and pan control TOOL_ACTIONs in ACTION,
and refer to them in that way.
The handlers are currently identical in Pcbnew and Cvpcb,
and Gerbview (and all canvases) can benefit from them as well
if they are in libcommon. Also saves duplicated code.
Fixes: lp:1795855
* https://bugs.launchpad.net/kicad/+bug/1795855
Adds Cut/Copy/Paste and Revert for footprints; introduces a new
shared Revert Changes? dialog; hooks up Add Library for footprints,
standardizes the Save As terminology.
This puts generic logic for KiCad environment vars in
one place.
Also updates the DIALOG_CONFIGURE_PATHS help to document
the new KICAD_USER_TEMPLATE_DIR and KICAD_TEMPLATE_DIR.
This version makes use of lots of things learned going down the
other rat hole. Avoiding the wxComboFocusHandler is key, as well
as specifying using the AltPopupWindow.
The key handler is still tricky with respect to those platforms
that use native controls, but the starting-key strategy is similar
to the one used with wxGrid text editors.
Happens only in Opengl mode.
So enforce controls in 3 group function: DrawGroup, ChangeGroupColor, ChangeGroupDepth.
Fixes: lp:1795044
https://bugs.launchpad.net/kicad/+bug/1795044
This is caused by:
* Not checking the hotkey data is not null when performing a
hotkey action
* Allowing hotkey actions on non-hotkey rows.
This fixes both of these, and adds an assert to warn if someone
does manage to fire a hotkey action on a non-hotkey row (but it
won't crash).
Fixes: lp:1794756
* https://bugs.launchpad.net/kicad/+bug/1794756
It was possible to get conflicting hotkeys when undoing and resetting hotkeys
to defaults.
This uses the same logic as when setting hotkeys to avoid conflcits in these
other two cases.
Fixes: lp:1794730
* https://bugs.launchpad.net/kicad/+bug/1794730
This separates the "ground truth" store of hotkeys from what is shown
in the dialog. This will allow us to filter the displayed hotkeys
while keeping the same underlying data structures.
Now, the UI data items interact with an intermediate set of data, which
represents the "original" hotkey data, and the "changed" data. The
ultimate aim here is to allow UI elements to come and go, but the
hotkeys that are "in-edit" are preserved.
This also allows us to abstract some bookkeeping complexity
out of the WIDGET_HOTKEY_LIST class into a separate non-GUI
class.
GTK uses a level of cooperative multitasking when dealing with
secondary event loops. This gives the wm enough leeway to process the
redraw before returning to the secondary loop
This commit finishes the removal of OpenMP from the KiCad codebase.
Removed in this commit are the OpenMP calls in 3d-viewer and
qa/polygon_triangulation as well as all references in CMakeLists.txt
std::thread is used instead for multithreaded computation
wxString constructor will determine string length using strlen() when it
is not explicitly specified, but there is no termination byte added when
reading file contents to 'buffer' variable.
Commit 73c229714 was a bit of a sledgehammer for the associated problem
of degenerate points. This commit replaces that one by only performing
additional simplification of the zone polygons on those polygons that
fail our initial triangulation attempt.
Add Display Settings to Footprint Browser.
Make each of them OpenGL on OSX and Cairo on other platforms.
Allow auto-zoom to be turned off and save last zoom setting.
Make ordering of tools in htoolbar consistent.
Standardize grid and zoom drop-downs.
Fixes: lp:1791667
* https://bugs.launchpad.net/kicad/+bug/1791667
Modal yes/no questions should not be allowed to fall behind other
windows. They need to be answered before the program continues and
clicking outside of the dialog should not hide dialog itself.
Fixes: lp:1790640
* https://bugs.launchpad.net/kicad/+bug/1790640
It creates a lot of integer overflow in Pcbnew in Debug mode (Legacy mode), although it ha meaning onlt for the Page Layout Editor.
This function should be deprecated when the GAL canvas is used in Page Layout Editor.
Calls the simplify/fracture polygon code on any polygon prior to
tesselation. This avoids issues with degenerate polygons where the
degenerate points are not sequential.
Fixes: lp:1790534
* https://bugs.launchpad.net/kicad/+bug/1790534
Replaces Poly2Tri with updated code to process polygons faster and more
robustly. Notably, we can now handle overlapping holes in the polygons,
allowing us to cache the triangulation of complex boards
Using Title + Message wasn't working for all the dialogs which
did substitutions in the message (which was a lot of them).
Fixes: lp:1789348
* https://bugs.launchpad.net/kicad/+bug/1789348
Also fixes a bug where nets wouldn't get changed because the
pads weren't changed and so the pad nets would propagate and
wipe out the changed nets on the tracks.
Also includes warning dialogs that pad nets will be changed if the
track nets are.
Fixes: lp:1779854
* https://bugs.launchpad.net/kicad/+bug/1779854
Use standard Magnetize() to handle grid and magnetic pads.
Use the standard menu from PCB_TOOL. Delegating the menu to
the SELECTION_TOOL just caused grief.
Also brings clients (such as Position Relative To) into line,
and implements better Cancel behaviour.
Also improves visibility of modal status messages:
- moves Select Anchor message from status bar to popup
- moves Select Reference message from dialog to popup
Fixes: lp:1786727
* https://bugs.launchpad.net/kicad/+bug/1786727
Also updates the file menu IDs so that we can actually handle
more than 9 items in the file history.
Also adds configurable file history length to the other gerber
files (zip, drill and job).
Fixes: lp:1745729
* https://bugs.launchpad.net/kicad/+bug/1745729
Use the wxWidgets official accelerator key string for WXK_BACK (this is "Back") in menuitems instead of "BkSp"
Also when reading the hotkey config file, avoid to set a hotkey to unassigned when its name is not found in list.
The default value is used.
Unassigned hotkey use <unassigned> as key name (and 0 as key code) in file.
Primary change is to replace most control/window borders with
AUI pane borders. We implement our own AUI border drawing
routine which avoids the ugly one-pixel white frames around
dark canvasses.
Also increases the signal-to-noise ratio of all the pane
creation code in the various frames.
Don't process zoom both in Legacy code and Modern code; one of
them will decide the zoom has already changed and do odd things.
Make sure the view is updated after zooming, otherwise you have
to move the mouse over the canvas before seeing the new zoom.
On Linux (GTK?) the accelerator key BkSp, when used in menus must be coded as "\t\b" and not "\tBkSp".
However, On Windows, it must be "\tBkSp".
Joys of multi-platform development.
This reverts the previous work-around 7d62f14dd for the RTree splitting
degeneracy that was placed prior to v5. It appears not to have worked
for all systems. In its place, we use doubles instead of floats to
calculate the bounding box when filling the RTree. This keeps maximum
volume items from overlapping with the system boundary in test cases.
Be more intelligent about sorting lib tree items. (Footprint
entries, for instance, come out of an already-sorted list.)
Don't recreate menus twice when laoding Footprint Editor.
More pervasive use of WX_FILENAME to avoid expensive calls to
wxFileName::SplitPath() and string concatenation.
For POSIX kernels do all the work on the file-system side so we
don't have to keep converting back and forth between encodings.
Cache the footprint info on disk (in the project).
Move timestamp-generation (and checking) to the filesystem so the
above will be bullet-proof.
Rewrite some wxWidgets classes for performance (see common.h).
Drop all uses of wxRAISED_BORDER and wxSUNKEN_BORDER from dialogs and
panels used in main frame windows.
Drop use of wxSP_3DSASH options on all wxSplitterWindow definitions.
Minor dialog alignment and spacing fixes.
This also fixes a bunch of bugs where an error during save would
still close the window (rather than cancelling the close action).
Fixes: lp:1785034
* https://bugs.launchpad.net/kicad/+bug/1785034
Put the buttons in platform-compliant order.
Get rid of SaveMultiOptions in favour of repeated standard save
dialogs with a "Apply to all" checkbox.
Fixes: lp:1783444
* https://bugs.launchpad.net/kicad/+bug/1783444
Eagle allows for variants of components to be listed in the schematic.
This patch copies the variant data into the imported schematic item,
prefixing the alternate variant names with "VARIANT_" and keeping the
alternate values.
There's no point in having both Save Symbol and Save Library when
only one can be selected at a time.
Also cleans up a bunch of extraneous icons, and fixes a few
copy/paste errors in menus and toolbars.
* in DIALOG_EDIT_LIBRARY_TABLES::TransferDataFromWindow(), m_contentPanel->TransferDataFromWindow
* is explicitly called to update library tables.
* Before wxWidgets 3.1.x, m_contentPanel->TransferDataFromWindow is not called by wxDialog::TransferDataFromWindow()
* and explicit call is needed.
* Since wxWidgets 3.1.x, m_contentPanel->TransferDataFromWindow is called by wxDialog::TransferDataFromWindow()
* thus creating two successive calls, not supported by m_contentPanel->TransferDataFromWindow.
* The call to wxDialog::TransferDataFromWindow() was just removed, as it is useless in this dialog
This removes the existing constructors so that all parsing must
be explicit and callers are made aware that they need to think
about illegal characters, malformed ids, etc.
Fixes: lp:1783474
* https://bugs.launchpad.net/kicad/+bug/1783474
Also brings horizontal toolbar in line with Pcbnew and Eeschema.
And updates the EDA_LIST_DIALOG to current practices.
This finishes the removal of the active library concept from the
Symbol Editor (started with the new component tree in 5.0).
Fixes: lp:1740717
* https://bugs.launchpad.net/kicad/+bug/1740717
wxDialog calls Show(false) when the dialog is about to be closed, but
KIDIALOG::Show() implementation did not forward the show parameter to
wxRichMessageDialog::Show() invocation. As the parameter was not
specified, the mentioned Show() call always used 'true' as the default
parameter, preventing the dialog from being closed.
Fixes: lp:1782999
* https://bugs.launchpad.net/kicad/+bug/1782999
Don't beep when inserting character from focused grid cell (but
before editor is opened).
Handle reference validation separately from name validation and
separately from user field value validation. The old way of setting
the fieldId on the validator wasn't working because the validator
gets copied.
Run validation when leaving cell. Don't just check for empty
(particularly for fields that CAN be empty).
Fixes: lp:1782917
* https://bugs.launchpad.net/kicad/+bug/1782917
(cherry picked from commit 79e04de)
This allows it to participate in Kiway things such as updating
language or common settings.
Fixes: lp:1779558
* https://bugs.launchpad.net/kicad/+bug/1779558
(cherry picked from commit b3f8478)
... and GetMsgPanelInfo.
Step 4 in the g_UserUnit eradication effort.
Also removes a couple of conversion routines that were close
enough to extinction.
(cherry picked from commit c75da51)
Work around wxWidgets failure to send first key through validator.
Unify treatment of INDETERMINATE values (such as for multiple
selections with mixed values).
(cherry picked from commit 7308729)
Allow copy of a single cell demarcated by the grid cursor.
Paste of lib_table s-expressions should always start at 0,0.
Let caller or specialized sub-class do auto-sizing; don’t
do it from within the base GRID_TRICKS.
Don’t start GRID_TRICKS menu IDs at -1; wxWidgets doesn’t
like it when you get to 0.
Add column visibility menu.
(cherry picked from commit e5071ed)
It's time to fix the focus issues. This adds a new SetInitialFocus()
routine to DIALOG_SHIM which will need to be called from a lot of
dialogs.
(cherry picked from commit 6d9647a)
The general idea is to support user-units inheritance. The
UNIT_BINDER allows wrapped controls to inherit units from their
parent dialog, while KEYWAY_HOLDER and DIALOG_SHIM allow child
KEYWAY_HOLDERs or DIALOG_SHIMs to inherit units from their
parent.
The GetUserUnits() method signature has to move to KEYWAY_HOLDER
rather than KEYWAY_PLAYER (where it makes more sense) as it’s the
only common ancestor of KEYWAY_PLAYER and DIALOG_SHIM.
As long as we'll be using the UNIT_BINDER more widely, it also
makes sense to move evaluation and validation into it.
This commit also provides eeschema’s DIALOG_LABEL_EDITOR and
pcbnew’s DIALOG_TRACK_VIA_PROPERTIES and DIALOG_SET_GRID as
models of how to use the new user-units inheritance, eval, and
validation.
Fixes: lp:593795
* https://bugs.launchpad.net/kicad/+bug/593795
(cherry picked from commit c8bc53e)
Step 1 of the g_UserUnit global eradication. This commit includes
basic hookup of hotkeys, units tool-buttons and grid dialogs.
(cherry picked from commit e0500ab)
The old item pointers (which aren't safe to keep around) were
removed in favour of opaque references (void*) which are then
compared against existing items when needed.
Also improves brightening by brightening the whole footprint
(ie: its pads, drawings, reference and value) rather than just
its target cross.
(cherry picked from commit 30e90b0)
Small icons for dialog browse, refresh, and row operations.
Icons in B&W so they don't over-emphasize with respect to other
controls in the dialog.
Layout cleanup for consistency. Removal of the blank space to
left of the fields list in the Global Fields Editor, and addition
of column-sizing-to-list-width.
More even spacing for buttons in html report panel.
Honor platform conventions for action button order and layout.
Move netlist importer to update-pcb-from-schematic algorithm
(display messages and then update instead of "dry run" checkbox)
(cherry picked from commit b21e19d)
Hotkey options have shifted some options from context-specific to global
hotkeys. This causes conflicts with old hotkey definitions. Instead,
we keep the v5 eeschema/pcbnew hotkeys completely separate. Users can
still import their custom hotkey files from v4.
Fixes: lp:1778408
* https://bugs.launchpad.net/kicad/+bug/1778408
When staging a commit for an object that has already been modified,
there is a Clone() made for the hypothetical entry. We need to free it
if we are not storing a new entry.
When parsing component names, we need to account for the possibility of
illegal characters (e.g. "/", ":") in the names from v4 libraries. They
are fixed internally by the cache parser but if we don't fix them
in the rescue routine, the symbol won't match it's cache name.
This standardizes all schematic illegal character routines into LIB_ID
Fixes: lp:1774774
* https://bugs.launchpad.net/kicad/+bug/1774774
Paths based on DEFAULT_INSTALL_PATH do not work on Windows,
as in fact there is no default install path, as in case of Unix-based
systems. In such case, the initial paths point to mingw subdirectories
that normally do not exist on user machines.
The patch changes the initial path values to make them relative to
the executable and follow the current Windows installer scheme.
Fixes: lp:1775796
* https://bugs.launchpad.net/kicad/+bug/1775796
The origin item doesn't have a fixed size. It is constant on the screen but
changes the effective BBox size based on the zoom level.
But we can't simply set it to the maximum size as this causes a splitting degeneracy
when compiling for Debian i386. By modestly adjusting the bbox, we avoid the degeneracy
while keeping the origin visible at all zoom levels
Fixes: lp:1777379
* https://bugs.launchpad.net/kicad/+bug/1777379
During the symbol library table implementation, the legal character
tests for the footprint library table were changed and the forward
slash '/' character became illegal. This change broke editing some
users footprint library tables that already had '/' in library table
nicknames. This change split the library nickname and library item
name illegal character tests.
It happens only when the 'warp and center cursor on zoom' option is disabled.
Was created after modifying the code in EDA_DRAW_FRAME::AdjustScrollBars(),
making EDA_DRAW_FRAME::RedrawScreen2() not working very well.
(partial fix of bug 1562173)
Jon Evans
John Beard
Jeff Young
jean-pierre charras
Seth Hillbrand
Michael Kavanagh
Wayne Stambaugh
Jean-Samuel Reynaud
Tomasz Włostowski
Jiaxun Yang
Baranovskiy Konstantin
Fabián Inostroza
Maciej Suminski
qu1ck
Thomas Pointhuber
Simon Richter
Ronnie Gaensli
Hal Gentz
Fabio Rossi
Alexey Chernov
Oliver
Andrew Zonenberg
José Jorge Enríquez
Mark van Doesburg
Carsten Schoenert
Martin Aberg
Andrzej Wolski