Introduces classes:
- INSPECTED: base class for types taking advantage of
generic properties system.
- PROPERTY*: meta-data storing information about properties
- PROPERTY_MANAGER: singleton class to get properties data
wxWidgets 3.1 has deprecated wxPATH_NORM_ALL when normalizing file
paths when calling wxFileName::Normalize(). This change keeps the
existing behavior except in places where our own internal
ExpandEnvVarSubstitutions() to expand environment variables.
Reduces multibyte conversion banging on library load. uuids already are ASCII by their nature and the logic checks that or else it generates a new kiid.
Unconnected items and schematic partity violations are also now
represented by markers, so the ERC/DRC window itself needs to do
the deep-delete.
Fixes https://gitlab.com/kicad/code/kicad/issues/12182
This allows us to switch back to a standard modal dialog (instead of
quasi-modal, which has problems with Ctrl-V in a search box inside a
standard file dialog -- such as when picking a path).
Fixes https://gitlab.com/kicad/code/kicad/issues/9473
This allows them to work in places like search boxes in standard file
dialogs. If wxWidgets doesn't find the standard IDs in our menus
then it won't enable them.
In wxWidgets 3.15 (and perhaps older version) the call to GetTextExtent() probably
creates major issues when called too many times, at least oo msys2.
It was probably also time costly.
Calling it and resize the PROGRESS_REPORTER only when needed fixes these serious issues.
Issues happened only when the board has a lot of zones (when teardrops are added)
With that also begin reworking the internal structure of the simulation
model storage. Some models have parameter information extracted from
Ngspice, which was specially patched to faciliate that. The model is
stored and managed by the SPICE_MODEL class (later will be renamed to
SIM_MODEL).
The wxtimer can fire multiple times and there exists the possiblity for
this to happen before the flags are properly set to prevent it. This
creates a concurrency mutex to skip the EDA_DRAW_PANEL_GAL refresh if
one is already underway.
Fixes https://gitlab.com/kicad/code/kicad/issues/12094
(cherry picked from commit 39dd51490d)
These can happen when a tool is active that sends signals when exiting
(e.g. deselectEvent). These may be caught by the active loop in another
tool which might try to update the UI after it has been freed. By
marking all tools as "shutdown", the only event returned to them should
be null. As an extra precaution, we flag the shutdown globally within
the tool manager and check this flag before launching either events or
new tools
Fixes https://gitlab.com/kicad/code/kicad/issues/10698
Board setup rows should be sortable when inserting new elements. They
get sorted when saving, this keeps that representation while editing
Fixes https://gitlab.com/kicad/code/kicad/issues/12015
Also find a few more places where we are reaching into a new frame to
perform actions that need to have dialogs closed.
Running actions should also wait for the next cycle rather than being
immediately executed when we are calling into a new frame. This allow
for the cleanup actions onClose() to happen prior to the next action
starting
Fixes https://gitlab.com/kicad/code/kicad/issues/11891
Converts dialog_image_editor to panel_image_editor. Embeds this panel in
a new properties dialog for the schematic and PCB editors that allows
editing position, layer, locked status, etc. like other items.
Removes a nanny setting that prevented the use of
blind/buried/micro-vias without a checkbox. If the designer does not
want microvias in their board, they simply do not place microvias.
on gcc 12.1 / msys2 the large initialized list in bitmap_info.cpp breaks
the compiler (perhaps a bug in the compiler).
So, as workaround, the initialization sequence is modified.
Previous the cross-probing options were mixed between sending and
receiving cross-probe events. This clarifies so that all of the pcbnew
cross-probe options deal with whether the cross-probe is seen in pcbnew
and all of the eeschema options deal with seeing the event in eeschema.
Also updates the wording in the options panels to be the same where
possible and adds tooltips
Fixes https://gitlab.com/kicad/code/kicad/issues/11454
The swatches are surrounded by non-scaling icons. We should not scale
the swatches unless we also scale the icons. This patch makes all
elements in the appearance panel equally non-scaling
This relates to https://gitlab.com/kicad/code/kicad/-/issues/11880
The main purpose is to make changes in g_BitmapInfo more easy.
Although it is automatically generated, it is sometime more easy to modify
it by hand (the recreation of bitmaps stuff is time consumming), especially
during testing.
Thread pools are long-lasting executors that have close to zero overhead
when launching new jobs. This is advantageous over creating new threads
as we can use this for threading smalling jobs and smaller quanta. It
also avoids the heuristics needed to determine the optimal number of
threads to spawn
gcc ignores the c++17 standard advisory in some versions and simply
doesn't warn about unused private variables. Clang and MSVC do warn
about unused private variables and do follow the standard
When using the "Filter" search for footprints/symbols, the least
surprising outcome is that the window filters the existing
(alphabetically sorted) list but does not change the display order based
on scoring.
This also needs to adjust the fix for
https://gitlab.com/kicad/code/kicad/-/issues/259 as that assumed the
selected element would be the first below the group (not the case if we
are sorting alphabetically)
Fixes https://gitlab.com/kicad/code/kicad/issues/11746
- Don't use GLX extension functions unless they are supported on the
connection. GLEW only checks for client library support.
- Don't try to set swap interval using glXSwapIntervalSGI when vsync is
not requested.
Fixes https://gitlab.com/kicad/code/kicad/issues/11751
Also implements a uniform mechanism for avoiding auto-scroll after
a prime event or dialog which results in a mouse position at the
edge of the canvas.
Fixes https://gitlab.com/kicad/code/kicad/issues/11057
Also adjusts metrics to better match stroke font.
Also removes text-halo highlighting as it's too expensive to re-render
when the zoom changes.
Fixes https://gitlab.com/kicad/code/kicad/issues/11460
Our menu bar code is interestingly complex. But we were throwing away newly made menu items to the void in the cases of constructed on the fly submenus
CHANGED: The text variable ${SHEETNAME} now always represents the name of the
sheet when used anywhere in the schematic editor, including the title block
ADDED: A new text variable ${SHEETPATH} which is replaced with the path to the
current sheet - e.g. "/Sheet 1/Sheet 2".
To ensure backward compatibility, the default drawing sheet now uses
${SHEETPATH}. Custom drawing sheets will need to be manually edited.
This also fixes a failure to use the correct effective width for
shapes (which might, for instance, inherit their widths from schematic
defaults, netclasses, etc.).
Fixes https://gitlab.com/kicad/code/kicad/issues/11358
Only SVG can actually handle transparency, but we should at least mimic
the color value of other transparent fills by blending with a (presumed)
white paper.
Fixes https://gitlab.com/kicad/code/kicad/issues/11304
We only need one bottom to top layer sequence definition.
Plot a sequence of layer IDs (LSEQ) in the order of the sequence.
Add helper method to layer set (LSET) to create a sequence of layer IDs
using another sequence for ordering.
Fixes:
* Various special cases around junctions on pins and dragging.
* Some rotations of endpoints resulting in a 45 degree rotate.
* Some cases where it was possible to get a line with neither
endpoint selected, and also substractive unselecting only one of two
selected endpoints unselecting both.
* Use line midpoint for sorting. Start and endpoints aren't
consistent in the order they appear on the X or Y axis. So,
we need to use the midpoint for our position for consistent
sorting when dragging groups of parallel lines where some
have the start and end reversed.
Other:
* Rename TEMP_SELECTED TO SELECTED_BY_DRAG. This is the actual meaning
of the flag, and should reduce confusion as
to when it should be used.
* Move usage of TEMP_SELECTED as an algorithmic mark to CANDIDATE
instead.
* Fix mistaken clearing of START_POINT and ENDPOINT.
* Move endpoint setting and clearing out of narrowSelection, and into
selectPoint and selectMultiple.
* Don't show dangling end warnings on new lines
Previously, coordinates were clamped to +- 60 inches. It makes no sense to
clamp them at plotter level: max cooed depends on the editor (schematic/board...)
Rename MAX_PAGE_SIZE_MILS to MAX_PAGE_SIZE_EESCHEMA_MILS and use it only for Eeschema.
Fixes#11196https://gitlab.com/kicad/code/kicad/issues/11196
When moving windows between monitors on Mac that changes the DPI, we
observe incorrect re-sizing of columns and rows. This attempts to
rectify the situation by avoiding DPI changes for Mac builds.
Fixes https://gitlab.com/kicad/code/kicad/issues/10586
When building the connectivity database, we should not be using the
connectivity to check for shapes.
To make this deterministic, we introduce two flags (ALWAYS_FLASH and
NEVER_FLASH) that are used with connectivity building to determine
whether a pad is flashed for connectivity or not. ZONE <-> PAD/VIA
connectivity will be checked with ALWAYS_FLASHED and all other
connectivity will be checked with NEVER_FLASHED if they are marked for
potential annular ring removal. If they are not marked for removal,
they will be checked ALWAYS_FLASHED.
Fixes https://gitlab.com/kicad/code/kicad/issues/11114
Arcs can be altered by the process of changing from on-disk
representation to in-memory representation. Saving back to disk without
modifying the arc should not modify the calculated values.
This stores a copy of the on-disk representation that is only used to
save back to disk in the event that the arc is not modified during
editing.
Fixes https://gitlab.com/kicad/code/kicad/issues/10442
The fix for https://gitlab.com/kicad/code/kicad/issues/10529 kicked the
subsequent IDs for unit selection off the maximum ID value for popup
menus. This increases the maximum popup number (integers are free)
(cherry picked from commit 79b6991d7b)
This is for the out-of-box experience for novice users. It is presumed
that folks with larger more complicated boards will turn it off.
Fixes https://gitlab.com/kicad/code/kicad/issues/6413
It avoid trying to calculate arc angles (start, end or arc angle) that
frequently create issues due to reverse Y axis, plot mirrored and/or
angle normalization with different criteria.
Fixes#10914https://gitlab.com/kicad/code/kicad/issues/10914
When setting previous values, we don't get the "OnFocus" event, so the
evaluation would not get triggered by simply repeating (using the
keyboard)
Fixes https://gitlab.com/kicad/code/kicad/issues/10752
(cherry picked from commit 4c81307391)
We need the item to be currently selected when repeating the last symbol
insert. This ensures we have a valid selection before starting the move
tool and possibly getting odd system behavior from mouse positions
Fixes https://gitlab.com/kicad/code/kicad/issues/10619
(cherry picked from commit 7642a9db79)
Also fixes some plot bugs with arcs.
Also moves polygonization of arcs (when required) in plotting code
from 5 degrees to calculated based on ARC_HIGH_DEF.
Fixes https://gitlab.com/kicad/code/kicad/issues/5017
Use 4 digits in mantissa as default and when exporting SVG.
Allow 0 as line width: this is the right value to draw filled shapes with no outline thickness.
The 3D mouse support is moved from PCB_EDIT_FRAME to PCB_BASE_FRAME.
This allows all PCB_BASE_FRAME derived windows to have 3D mouse enabled
2D navigation support.
Instead of the mouse move and zoom algorithms calculating the new
position or scale values relative to a starting value, the new values
are calculated relative to the current values. This allows the user to
use a second input device to move or zoom the view at the same time
without its change being undone by the mouse.
The zoom selection should only change when requested by the user, not in
response to UI updates. This can cause unexpected zoom shifts when the
calculated zoom is within a range of one of the presets. It also adds
unneeded calls during the UI update cycle
Fixes https://gitlab.com/kicad/code/kicad/issues/10498
(cherry picked from commit 6810479a19)
Includes bug fix for catastrophic error in Add() for converting to
radians.
Includes bug fixes for the fact that the pcbnew test can't seem to
find the ANGLE_* objects (getting all 0's instead).
Putting 1,000s of tiny triangles on a gerber file will cause mfg fits.
Instead, we use easy outline plotting for plots and triangulation for
everything else.
Especially using a translated name breaks kicad config and files because
in non English languages both translated and not translated names were used in code.
Rather than skipping our endEdit() call in libedit, we need to
parameterize whether we want the shape open/closed. Closed will remove
the last segment if it lands on the first point. We don't want that
but we do want to remove the last point if it duplicates the second to
last (in the case of double-clicking)
Fixes https://gitlab.com/kicad/code/kicad/issues/10334
(cherry picked from commit 55020c2b89)
Also fixes a bug where outline fonts weren't being handled for footprint
text in 3D Viewer, and a copy/paste error in stroke font handling for
both PCB and footprint text in 3D Viewer.
Fixes https://gitlab.com/kicad/code/kicad/issues/10319
Mesa does not support adaptive swapping but will sometimes report that
it does. This prevents Mesa drivers from testing (and segfaulting) the
limits of their call
Fixes https://gitlab.com/kicad/code/kicad/issues/10069
(cherry picked from commit 100cf757fe)
1) Unify metrics between stroke and outline fonts
2) Unify handling of rotation and mirroring
3) Bug fixes in collision handling
4) Use of VECTOR2I (instead of VECTOR2D) for world-coordinates
5) Generate outline font overbar with rounded ends and fix rotation
bugs
6) Generate wxEVT_CHOICE events from FONT_CHOICE::SetFontSelection
7) Change text-item PNS SOLIDs to use compound shapes
Checking for the existence of the call only validated that our header
defined the value, not that the video card/driver supported the call.
We query the extensions string directly to check for support. This
should fix both the X11 and virtualization issues (potentially other
crashes with older video cards as well)
Fixes https://gitlab.com/kicad/code/kicad/issues/8944
(cherry picked from commit 7c9340f855)
This one is primarily about pushing TEXT_ATTRIBUTES in to the GAL
API, but it also includes adding EDA_ANGLE signatures to some trig
routines to ease integration.
Seth Hillbrand
Marek Roszko
Jeff Young
jean-pierre charras
Roberto Fernandez Bautista
Jon Evans
Maciej Suminski
Alex
qu1ck
Wayne Stambaugh
Mikolaj Wielgus
Mike Williams
Fabien Corona
Miklós Márton
Mario Luzeiro
markus-bonk
Ola Rinta-Koski
Werni
Thomas Pointhuber
Ian McInerney