7e682e9948
Don't allow pins on corners.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7917
2021-03-16 22:03:08 +00:00
30fdba4cbb
Finish grid-snapping impl.
2021-03-16 22:03:08 +00:00
4e63aefaab
Call Layout OnSizeGrid
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5690
2021-03-16 21:59:44 +00:00
ee4bc8b1d0
Fix default line width for symbol editor graphic items, add validation
...
There was a mils to iu conversion missing for line width (the default
values are in mils).
Fixes https://gitlab.com/kicad/code/kicad/issues/7813
2021-03-16 13:50:41 +00:00
2bafc1af00
Give up on using preview layer for PlaceComponent.
...
1) Cloning the component fails to select all its pins.
2) Something about the layer compositing causes light selection shadows
to get even lighter. The default pretty much disappears.
Fixes https://gitlab.com/kicad/code/kicad/issues/7908
2021-03-15 19:04:59 +00:00
82af98b08e
Now that user can specify alpha we don't need to add in more.
2021-03-15 19:04:59 +00:00
de12ebf16f
Check if symbol is disabled first
...
By checking for disabledness of the symbol first we skip potentially unnecessary
validation that in turn would throw an unnecessary warning
Fixes https://gitlab.com/kicad/code/kicad/issues/7338
2021-03-15 08:39:46 -07:00
573dd36515
Handle <delete> in move and drawing tools.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7924
2021-03-15 14:23:54 +00:00
afab60ae06
Fixes for autoplace fields.
...
1) Don't factor in pin names when computing symbol body boundingbox.
2) Grid-snap only in the axis corresponding to the layout side.
3) We only need interline spacing *between* lines, not for each line.
4) Also cleans up the unit checking logic as the unit can't be more
than 0 unless it's a multi-unit symbol.
Fixes https://gitlab.com/kicad/code/kicad/issues/7907
2021-03-15 02:23:29 +00:00
7415bf0c62
Don't hide (or disable) options if it's not obvious why.
...
It deprives us of the opportunity to inform the user what the conditions
are.
2021-03-15 02:23:29 +00:00
4482b3baba
altium: Handle special strings and convert them into KiCad variables. Use Comment for VALUE.
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/6256
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/7736
2021-03-14 16:40:36 +01:00
e34734c230
Make sure pasted sheet instances get added.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7872
2021-03-13 16:34:30 +00:00
a79974fb92
Symbol editor: fix segfault when saving library with renamed symbol.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7866
2021-03-13 08:28:52 -05:00
b71ab01de4
More wxWidgets 3.1 layout adjustments.
2021-03-13 00:00:38 +00:00
3e947553f5
Adjust pin conflicts table for wxWidgets 3.1.
2021-03-13 00:00:38 +00:00
faf9cca938
Fix many cases of old mils flag getting interpreted as allowEval flag.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7883
2021-03-12 15:15:50 +00:00
b20f18e6c5
Properly handle mixed-up group buses
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7870
2021-03-11 18:24:39 -05:00
44f88f840c
Bitmaps: a few improvements from review
2021-03-11 08:37:35 -05:00
18037e2f65
Rework bitmap system to load from archived PNGs
...
Bitmaps are now identified by an enum class instead of by pointers.
Bitmap loading and caching is now handled by a class in common, and
we no longer compile most bitmaps into the binary, so there is no
longer a bitmaps static library.
Instead, bitmaps are archived to a .tar.gz file which is installed
in ${KICAD_DATA}/resources/images.tar.gz
The source PNGs are checked in to Git as the original CPP files were,
so that people can build without the required dependencies to convert
SVGs to PNGs.
Initial support is also added for dark theme icons, although this
is not yet exposed in the GUI.
Stubs are present for multi-resolution image resources, but this is
not fully-baked yet and could use some refinement.
2021-03-11 08:37:35 -05:00
2bc22de1a5
Eeschema: fix crash when opening preferences, due to null pointer.
...
In panel preview, Schematic() returns a null pointer.
Fixes #7869
https://gitlab.com/kicad/code/kicad/issues/7869
2021-03-11 08:20:27 +01:00
33f465f754
SCH_GLOBALLABEL::GetBoundingBox(): do not include IREF when not shown.
2021-03-10 18:38:38 +01:00
d295b5d6de
SCH_GLOBALLABEL: fix broken position of IREF, creating a broken bounding box.
...
Note also the bounding box is too large when the IREF is not shown, because
IREF is always included, even if not shown.
Fixes #7864
https://gitlab.com/kicad/code/kicad/issues/7864
2021-03-10 17:58:44 +01:00
068e85c567
Reset moved flag after completing move.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7818
2021-03-10 16:00:28 +00:00
861ad0b6ec
Don't bloat layout.
2021-03-10 16:00:28 +00:00
fb29b4f946
Eeschema: add missing symbol cache library file warning.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7346
2021-03-10 09:52:53 -05:00
e48f86bfd6
Move default assignment on Mac.
...
CHANGED: add corner and repeat last command now default to 'I' instead
of '<insert>' on Mac.
1) wxWidgets doesn't currently display the correct graphic in the menu
for the insert key
2) Mac laptops don't have an instert key
Fixes https://gitlab.com/kicad/code/kicad/issues/5016
2021-03-10 13:35:04 +00:00
3d4ac9af03
Relocate win32 resource files to the central folder for further consolidation
2021-03-09 21:48:14 -05:00
8be3ff5a0a
Perform a slightly more aggressive cleanup.
...
Also removes the functionality that selects the newly-added item as
we don't do that with any of the other drawing tools.
Fixes https://gitlab.com/kicad/code/kicad/issues/7833
2021-03-09 21:42:35 +00:00
14f00271a4
Fix typo in the schematics help text. Align bottom example properly, as the subscript letters are smaller.
2021-03-09 16:23:12 +00:00
2a9186d9e9
Don't re-use FieldIDs when assigning ids on save.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7849
2021-03-09 15:09:31 +00:00
e4590e4762
Make sure SCH_GLOBALLABEL's bounding box includes its intersheet ref.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7819
2021-03-09 12:08:33 +00:00
3c8e35249c
Mac doesn't like menus that start with ID 0.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7845
2021-03-09 12:08:33 +00:00
ae15098a5d
Make a menuitem name translatable and understandable.
2021-03-09 12:53:44 +01:00
e2aa7be4b3
Added a lot of consts and refactored a few lines
2021-03-08 12:49:48 -08:00
c16199c3f9
eeschema: add a setting to allow intersheets to not list their own page
...
Also disable inter-sheet options when "Show inter-sheet references" is
not checked.
2021-03-08 20:40:37 +00:00
14b1d36b38
Simulator: Fix a ugly bug that happens is some simulations
...
TRhe initial code was broken.
2021-03-08 20:01:36 +01:00
638a9b693d
SIM_PLOT_FRAME_BASE: minor cosmetic enhancements and fix a incorrect wxmenu
...
name in the .fbp file that prevent to rebuild working .cpp and .h files.
2021-03-08 16:33:08 +01:00
6fd247a152
Check for active tool as well as items.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7821
2021-03-08 14:09:43 +00:00
c1003e2ddd
Fix missing call to Layout() in SIM_PLOT_FRAME after adding widgets.
...
Fix a minor wxWidgets warning.
2021-03-08 13:49:45 +01:00
8285f2a223
Fix a compil error.
2021-03-08 12:45:00 +01:00
ed61440d2a
Improve clarity.
2021-03-08 11:07:35 +00:00
5b70508624
dialog_sim_settings: don't try to read current wxChoice selection if no choices.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7823
2021-03-08 09:36:15 +00:00
720147d272
Remove transitive inclusion of bitmaps.h
2021-03-07 16:08:57 -05:00
7f9890adaa
Fix a install issue after changing a plugin filename (by commit a0f57d6)
2021-03-07 20:57:09 +01:00
a0f57d6846
Cleanup BOM script descriptions
...
- make descriptions consistent
- fix inaccuracies
- describe what scripts do more precisely
2021-03-07 16:33:59 +00:00
22b4a74bfa
Don't forget intersheet refs when collecting non-view items.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7819
2021-03-07 15:04:01 +00:00
3ab1ef7b83
Formatting.
2021-03-07 15:04:01 +00:00
b691c18bfc
Allow netclass assignents to unnamed nets.
...
Most of the code had already moved over to this, but there were a few
hold-outs.
Fixes https://gitlab.com/kicad/code/kicad/issues/7802
2021-03-05 19:16:09 +00:00
0fc8a9d89a
Eeschema: Fix ctrl-MMB double click to perform 'Zoom to Objects'
...
CHANGED: Ctrl-middle mouse button double click should perform
'Zoom to Objects' in Eeschema, but a change in modifier key handling
broke it. This MR restores the functionality.
Fixes https://gitlab.com/kicad/code/kicad/issues/7803
2021-03-04 22:43:03 -08:00
5ca7a2c457
Fix some issues with group bus prefix handling
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7196
2021-03-04 23:37:46 -05:00
4ddb942ec0
Do not allow drag selection or drag move when already moving something
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7800
2021-03-04 19:01:31 -05:00
6cdc3664ba
Symbol editor: fix crash whe changing symbol name.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7791
2021-03-04 18:21:41 -05:00
7a00e01b3e
Eeschema: fix false positive library symbol changed ERC errors.
...
This fix required sorting all of the LIB_PART draw items to ensure
accurate comparison between the symbols stored in the schematic and the
original library symbols. This has a noticeable impact on symbol library
load performance. It may also cause significant changes the next time
the library is saved due to changes in the draw item sorting. Hashing
may be a better solution here but this addressed the immediate problem.
A skeleton method SCH_SCREEN::SwapSymbolLinks() was added because there
is most likely an issue with orphaned symbols in the schematic library
symbol cache during undo/redo operations. More testing is required to
verify this.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7263
2021-03-04 17:59:24 -05:00
ff23f4324a
Do not hardcode altium file extension length
2021-03-04 12:20:40 +00:00
8831c5567c
Add win32 version manifest block
2021-03-04 00:34:48 -05:00
1fc399fa31
Fix a few more cases of picking up wrong mouse positions
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7745
2021-03-03 20:09:24 -05:00
b9d26a55f2
Show variable references of text in status bar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7790
2021-03-03 18:58:04 +00:00
908de37e7c
Don't hardcode the file extensions where possible
2021-03-03 01:13:59 +00:00
69e310918e
Update singletop eeschema to append the new schematic extension
...
This is used when launching a single top instance and no extension
is supplied to the filename given.
2021-03-03 01:13:59 +00:00
0ce8bce753
Symbol editor: fix symbol renaming bug.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7616
2021-03-02 19:19:08 -05:00
2c289b3f35
Check for ".SchDoc" before replacing to ".kicad_sch" for subsheet
2021-03-02 22:30:08 +00:00
f83b9236ac
Formatting
2021-03-02 22:30:08 +00:00
b98602583c
Remove "SchDoc" and use "kicad_sch" instead for subsheet names
2021-03-02 22:30:08 +00:00
042ea9761c
Revert "Import footprint to symbols. Subsheet is name is prepended to footprint name,..."
...
This reverts commit 8aa4faa4ce24adc6310223952e8b5773ce245778
2021-03-02 22:30:08 +00:00
292aff48fd
Import footprint to symbols. Subsheet is name is prepended to footprint name, which is probably NOT OK when syncing with PCB.
2021-03-02 22:30:08 +00:00
f90164f7cf
Fix some typos and improve wording
2021-03-02 19:13:49 +01:00
f6064523a3
Use valid diff pair suffixes in label help example
2021-03-01 21:47:29 -05:00
7760570d76
Treat action buttons in Symbol/Footprint Properties as OK, not Cancel.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7001
2021-03-01 20:37:04 +00:00
57e948ff08
Make sure axesEnabled is set before saving config.
...
We don't actually allow the user to change this at present, so one
could argue that we should remove it from what is saved out of the
config. But this is a smaller, safer change.
Fixes https://gitlab.com/kicad/code/kicad/issues/7666
2021-03-01 20:37:04 +00:00
959ae73a01
Eeschema,sim: extract plot colors to new class
2021-03-01 18:50:37 +00:00
375cd12258
Eeschema: never replace event position in wire drawing tool
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7745
2021-03-01 12:17:18 -05:00
5bc2285aef
Fix another failure of dynamic_cast<>.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7767
2021-03-01 14:46:27 +00:00
8a33542bcd
SCH_COMPONENT::GetField() expects a vector index, not a field id.
...
Check this at compile time. Callers wanting to use an index now must
use SCH_COMPONENT::GetFields()[i] instead.
Fixes https://gitlab.com/kicad/code/kicad/issues/7757
2021-02-28 15:10:37 +00:00
13bcfc79a1
Eeschema, DIALOG_ERC: fix minor issues:
...
- avoid printing twice the messages when running tests (Report() was called twice).
- when saving the report open the project directory by default.
2021-02-28 15:52:14 +01:00
8ab1f957a2
Update title after a Save All.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7752
2021-02-27 23:17:48 +00:00
790e97a398
Only report "done" once, and be a (bit) more descriptive about it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7743
2021-02-27 20:28:06 +00:00
d8089ed54a
Eeschema: Adds wire when dragging directly connected labels
...
CHANGED: KiCAD allows connecting components directly together in
schematics. If the user drags one of the components, KiCAD
adds a wire to keep the conection intact. It should do the same for
net and global labels but it doesn't.
This MR adds net and global labels to the list of items that can connect
to other items.
Fixes https://gitlab.com/kicad/code/kicad/issues/7713
2021-02-26 22:56:28 -08:00
76ef98339d
CADSTAR PCB Archive Importer: Re-write loading of power symbols
...
Ensure all each power symbol is unique for each net name even
if it uses the same graphical symbol.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7722
2021-02-26 19:32:44 +00:00
7fda7438f9
BOM dialog: explain when we can't find scripts
...
Also default to the user plugin dir when adding a new plugin,
and don't convert filenames to full path on save.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7719
2021-02-25 22:41:12 -05:00
808ab92834
Simplify default format for exporting netlist.
...
It's now just remembers the last-shown tab.
Fixes https://gitlab.com/kicad/code/kicad/issues/7618
2021-02-26 00:36:39 +00:00
f73039cb18
Fix wire endings both too small and too large
...
Junctions should only be wire endings when ending directly on the wire.
This is the requirement for netlisting, so we need to follow it in the
auto-end as well.
SCH_LABEL needs to allow ending because any wire that touches the label
will be connected, so there's a use case for this. However, the
bounding box for local labels did not include their connection point, so
we increase that box a bit. Note that this might have the opposite
effect to https://gitlab.com/kicad/code/kicad/-/issues/7689
Fixes https://gitlab.com/kicad/code/kicad/issues/7714
2021-02-25 16:27:05 -08:00
b8c95345d0
Make sure reporters have a better default path than /bin.
2021-02-25 15:05:26 +00:00
1ac81c04e5
Bugfix for "Edit text and graphic properties" dialog: vertical alignment code
...
erroneously checked against change in horizontal alignment UI item
2021-02-25 12:52:04 +01:00
cfa3f3afeb
Fix compil issue.
2021-02-25 10:44:14 +01:00
9797bc5f25
Left Mouse Button: use same modifiers for Pcbnew, Eeschema and pleditor for selection.
...
It also means the "force disambiguation menu" uses now Ctrl in Eeschema and pleditor.
2021-02-25 08:22:35 +01:00
8d62c73b86
Eeschema: overhaul storage of BOM plugin settings
...
CHANGED: BOM generator plugins are no longer loaded by
searching all plugin directories; instead a
fixed default set of plugins is provided.
Also:
- Move from sexpr to JSON
- Support both full-path and no-path specifications of plugins
- Add a Reset to Defaults button to reset the list
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7633
2021-02-24 22:45:42 -05:00
9f42b5e8c7
Attempt to fix Coverity issue 316502.
2021-02-24 17:36:11 -05:00
92cc88f87c
Tighten up schematic label bounding boxes
...
Margins were being added in more places than necessary
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7689
2021-02-24 17:15:35 -05:00
0bab025832
Fixup toolchaining for immediate mode
...
The move tool can stack on others, so when we re-enter the previous tool
this caused another immediate action. We flag re-entry in the tool
stack to check for this and avoid unexpected tool starts
2021-02-24 10:44:54 -08:00
2fd5f25c3c
Allow expand selection to work (even if you probably can't get there).
...
I think the guessSelectionCandidates narrows down to a single item
in 99.9% of cases, so we can probably remove this entirely. But for
now it's safer just to fix it.
2021-02-24 14:12:32 +00:00
1786ae8773
Eeschema: use symbol nomenclature for object file naming.
2021-02-24 08:48:02 -05:00
eee04f4482
Fix Bus Management UI flow on macOS
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7510
2021-02-24 01:32:29 +00:00
0518d9c546
Add more force-immediate tools
2021-02-23 17:05:03 -08:00
005622027f
Add component/footprint is always immediate
...
When a user clicks on the "Add Component", "Add Power" or "Add Footprint"
icon, they want to add the item. Requiring an extra click on the screen
before selecting the component/footprint is not needed.
2021-02-23 16:15:31 -08:00
7318417ca4
Fix typo in expand-selection-disambiguation menu logic.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7654
2021-02-23 22:09:00 +00:00
7e2b0e63f1
Fix junction logic when splitting two wires.
2021-02-23 21:43:41 +00:00
c0487e5c87
Don't leave the cursor position forced.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7665
2021-02-23 21:43:41 +00:00
94bc373f30
PANEL_EESCHEMA_EDITING_OPTIONS: add info about left mouse click and modifiers.
...
Similar to the existing info in Pcbnew editing options panel.
2021-02-23 20:40:22 +01:00
8755f55956
Fix copy-paste error.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7674
2021-02-23 17:50:11 +00:00
a9ea617069
Add some defensive code for double-moves.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7665
Fixes https://gitlab.com/kicad/code/kicad/issues/7502
2021-02-23 16:38:18 +00:00
9eb2113a50
Make TwoClickPlace cursor handling match SingleClickPlace.
2021-02-23 15:28:45 +00:00
e251cf067a
Formatting.
2021-02-23 14:34:06 +00:00
d7b6d4a541
Warn user when placing a junction is just going to remove it again.
...
Also removes a duplicate call to SaveCopyForRepeatItem (which has
already been done in AddItemToScreenAndUndoList).
Fixes https://gitlab.com/kicad/code/kicad/issues/7651
2021-02-23 12:51:15 +00:00
b938df0e46
Coding policy.
2021-02-23 12:49:02 +00:00
a3b9e8ddb4
Round 2 of Worksheet -> Drawing Sheet.
2021-02-23 11:57:44 +00:00
b484c0787b
Disable commands in SingleTop
...
We cannot do forward/reverse annotation in Single Top mode because we
depend on shared memory access. This disables the menu options in this
case and replaces the toolbar update pcb icon with the import netlist,
which is more appropriate for single top mode
Fixes https://gitlab.com/kicad/code/kicad/issues/7637
2021-02-22 14:49:13 -08:00
cad5198ab7
Worksheet -> (industry standard) Drawing Sheet.
2021-02-22 17:35:46 +00:00
ccbc0f73cc
CADSTAR Schematic Archive Importer: Fix Coordinate Rounding error
...
Rewrite of the calculation to convert CADSTAR to KiCad coordinates,
rounding half way cases away from zero.
Use integer division instead of double, to ensure precision.
2021-02-22 13:24:00 +00:00
842a930ced
CADSTAR Schematic Archive Importer: Autoplace fields when adding sheet
...
Makes the sheets look a little bit better when there is no block name
in the original CADSTAR design.
2021-02-22 13:24:00 +00:00
7b5cf955af
CADSTAR Schematic Archive Importer: Visible fields to calculate BBOX
...
- Ensures page size is calculated correctly
2021-02-22 13:24:00 +00:00
5acdf1ddb1
CADSTAR Schematic Archive Importer: Align to original grid
...
Previous assumption of 100mil grid in CADSTAR schematic designs has
been proven to be incorrect. Let's use the "working grid" in the
original design instead.
2021-02-22 13:24:00 +00:00
c98106ebcf
CADSTAR Schematic Archive Importer: Parse TESTPOINT
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7574
2021-02-22 13:24:00 +00:00
09ebfcd650
CADSTAR Importer: Fix Code Style
...
- Rename member variable names to use the 'm_' prefix
- Rename a few object types that clashed with KiCad object names, such
as BOARD and SCHEMATIC, to avoid the use of '::' to access the KiCad
objects.
- Remove some unused code.
2021-02-22 13:24:00 +00:00
09d3667bce
Fix bone-headed mess up of two-click-place.
...
Original architecture was to pass KICAD_T in to specify what kind of
object you wanted. That didn't work well with things like cursor
shape so it was moved to setting booleans based on the ACTION. When
I cleared out the old KICAD_T stuff I missed one case where it was
still used. That is now corrected as well.
Fixes https://gitlab.com/kicad/code/kicad/issues/7651
2021-02-22 11:54:03 +00:00
f1039dfb94
Disable project saving outside explicit save actions
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7589
2021-02-21 21:31:45 -05:00
781d293b60
Add option for text updating to Update Symbol.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6420
2021-02-22 00:36:40 +00:00
afb4bbde47
Bug fixes to Eeschema context menu.
...
1) Fix typo in SingleSymbolOrPower
2) Remove Edit reference/value/footprint items for power symbols
2021-02-21 23:45:32 +00:00
34d3218f73
Translation cleanup.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6078
2021-02-21 23:13:13 +00:00
2d28ed8eda
Move canvas backend selection to Preferences.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7630
2021-02-21 20:12:43 +00:00
f9c42585fb
Force immediate action for auto start wire feature
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7503
2021-02-21 18:43:34 +00:00
18d4d517b0
Implement RMB Import Sheet Pin as a single-shot.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7638
2021-02-21 15:46:53 +00:00
8a12aa4e3a
Handle unit changes in the netlist
...
Each symbol unit in eeschema has a unique identifier. But we don't have
a unique identifier for the entire symbol. So changing which symbol
instance was unit A (our default base for matching), changed the UUID
that we were using to match the footprints.
This commit adds all UUIDs to the netlist, allowing us to match symbol
to footprint without worrying about which unit is referenced.
This still does not handle changing different units on different sheets.
Fixes https://gitlab.com/kicad/code/kicad/issues/7604
2021-02-20 20:11:49 -08:00
907e282347
Silence some msvc warnings
...
- exception variables that were unused
- RAYSEG2D improperly foward declared with class instead of struct
- unused vars
2021-02-20 11:58:55 -05:00
91e876ce0d
Make sure the title is updated when file is saved/reverted/etc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7626
2021-02-20 15:09:47 +00:00
881cb3182b
Move writable dir checking lower down.
...
(Well, it was already lower down, this really just removes the higher
up calls that were getting in the way.)
Fixes https://gitlab.com/kicad/code/kicad/issues/5937
2021-02-19 22:24:08 +00:00
5994ce3711
Be more aggressive about updating title to show dirty status.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7613
2021-02-19 21:58:49 +00:00
1a36971583
Remove higher-level write-protected check. It's now done lower down.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5937
2021-02-19 21:46:06 +00:00
26cb05051b
fixup! Whittle down library tree context menus to be more contextual.
2021-02-19 19:07:45 +00:00
57e043e0e6
Don't allow moving markers. Do allow excluding them.
2021-02-19 19:07:45 +00:00
c2f68ca4da
Whittle down library tree context menus to be more contextual.
...
(From discussion on Zulip.)
2021-02-19 19:07:45 +00:00
48853d0c88
Eeschema: Allow auto-wiring / drawing from unconnected bus and graphic line endpoints
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7537
2021-02-19 17:15:27 +00:00
9cc2781d55
typo
2021-02-19 10:35:25 +01:00
d0ca01be22
DIALOG_EDIT_COMPONENTS_LIBID: do not replace fields by default.
...
Values entered by the user will be lost and the schematic can be broken.
This is especially true for generic components.
Add also a tool tip for this option.
2021-02-19 09:37:53 +01:00
05b559c9dc
Quiet gcc warnings
2021-02-18 11:20:27 -08:00
b43db7cd7d
Fix assert in Symbol Editor.
...
Also allows some symbol lib operations when we know the context even
if the library itself isn't selected. (For instance, select a symbol,
copy, paste.)
2021-02-18 18:08:37 +00:00
0df1558e10
eeschema: update symbol fields when editing Symbol Library links
...
Also making this behavior optional via a adding checkbox to the
Edit Symbol Library Links dialog.
Fixes: https://gitlab.com/kicad/code/kicad/issues/7010
2021-02-18 18:06:11 +00:00
d951ac5bfe
Fix logic issue with sheet pin ERC
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7592
2021-02-18 12:10:59 -05:00
66b33834b5
Always enable save; move dirty bit to asterisk in title bar.
...
Also unifies PCB Editor and Schematic Editor names with other
locations in the GUI (which were still Pcbnew and Eeschema).
Fixes https://gitlab.com/kicad/code/kicad/issues/7587
Fixes https://gitlab.com/kicad/code/kicad/issues/7594
2021-02-18 16:05:42 +00:00
6a5bba2a80
We don't really want users hand-editing library table files.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7591
2021-02-18 11:53:36 +00:00
b2a4cbedda
Add conditions for rotate/group/lock items in toolbar.
...
Also fixes cut/copy/delete conditions to allow use in immediate mode.
2021-02-18 00:10:41 +00:00
b80fdad511
Don't generate a format specifier length of ":"
...
It's ambiguous, are we talking the length of a human colon or a pigs?
Fix #7556
2021-02-17 18:53:07 -05:00
a25dfcd1b4
Allow "Update Symbol" command on power symbols
...
Power symbols can be modified in the library so it is useful to allow
them to be updated with the right-click menu
2021-02-17 15:31:22 -08:00
309fb0825c
Eeschema: allow auto-wiring from zero-length pins (e.g. power symbols)
2021-02-17 12:29:19 -05:00
b6a7981e62
Write changes back to grid after using file explorer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7361
2021-02-17 14:08:53 +00:00
b609c7dcd6
Kick the osx specific path helpers into PATHS
2021-02-16 23:29:26 -05:00
114043fe93
eeschema: add interface to SCHEMATIC for better testability
...
- added abstract class SCHEMATIC_IFACE
- added missing 'virtual' keyword at destructor
2021-02-17 00:59:44 +00:00
dbbe9cdee4
Hide infobar for save when saving
2021-02-16 15:54:43 -08:00
f9c7eae63a
Avoid null access in NGSPICE::AllPlots
2021-02-16 18:37:57 -05:00
2c4d53d994
Minor cleanup.
2021-02-16 21:11:36 +00:00
2a7e60960a
Use standard mirror icons & terminology.
...
Also use standard group icons.
Also put both (and rotate commands) in toolbar.
Fixes https://gitlab.com/kicad/code/kicad/issues/7504
2021-02-16 21:11:36 +00:00
24795f5b12
Fix overzealous breakSegments()
...
We cannot break segements that are merely close or on endpoints, so we
filter these prior to the break routine. Failing to do this was
overloading our undo stack with bogus values
Fixes https://gitlab.com/kicad/code/kicad/issues/7553
Fixes https://gitlab.com/kicad/code/kicad/issues/7557
Fixes https://gitlab.com/kicad/code/kicad/issues/7554
2021-02-16 10:12:30 -08:00
4408897b87
Formatting.
2021-02-16 16:24:37 +00:00
114dceec2e
Eeschema: Eagle schematic plugin parser improvements.
...
* Complete drawing of sheet border/title block symbol.
2021-02-16 09:33:15 -05:00
a1f510ef6a
Make sure migrated aliases get hooked up to migrated parents.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7322
2021-02-16 12:49:06 +00:00
f997deec75
eeschema: fixing title block variable expanding in text objects
...
Also fixing an off-by-one error, which also affects pcbnew.
Fixes https://gitlab.com/kicad/code/kicad/issues/7489
2021-02-15 22:24:05 +00:00
089b7afacf
Eeschema: Eagle schematic plugin parser improvements.
...
* Fix multi line text alignment.
* Parse schematic frame objects and convert them to lines.
* Make implicit global labels normal size so they can easily be seen.
* Move sheet fields to a more sensible position.
* Parse schematic symbol instances before wires so that the implicit power
connections can properly be tested. This will be used at a later time.
* Scale label text size down to allow for differences in label offset and
graphical items.
2021-02-15 16:44:58 -05:00
d93ba0a06a
Choose half-grid for mirror
...
Using the half-grid allows for odd-grid counts to remain on-grid,
closer to the actual center.
Fixes https://gitlab.com/kicad/code/kicad/issues/7493
2021-02-15 11:59:04 -08:00
55e34592a6
Fix expand selection option in Eeschema
2021-02-15 10:53:17 -08:00
8745691da3
Toggle LOCALE_IO before re-caching
...
cacheLib() can cause a re-load event, which requires the C-locale.
LOCALE_IO needs to be set before this event to prevent mistaken ','/'.'
mixups
Fixes https://gitlab.com/kicad/code/kicad/issues/6434
2021-02-15 09:10:21 -08:00
9205f1571d
EE_SELECTION_TOOL correctly identifies buses and wires for auto starting
2021-02-15 14:57:06 +00:00
cf42d692bf
Remove some dead code. A little bit of comment cleanup as well.
2021-02-15 14:13:43 +00:00
212c67c365
Fix bus<>net conflict ERC not checking local labels
2021-02-14 21:35:29 -05:00
8135abffde
Allow applying global edit actions to selected items only
2021-02-14 18:39:33 -05:00
ec20121114
Make sure schematic symbol fields get transferred to symbol editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7501
2021-02-14 18:30:14 +00:00
0f463ee84b
Add Update Symbol Fields dialog for derived symbols.
...
ADDED This allows one to update a derived symbol's fields from the
parent symbol.
Fixes https://gitlab.com/kicad/code/kicad/issues/7168
2021-02-14 12:15:26 +00:00
1608282a57
Remove msys2 search paths for ngspice under msvc
2021-02-13 20:08:31 -05:00
c51e8ff0c6
Iterate over screens, not sheets, for bus alias loading
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7147
2021-02-13 11:04:55 -05:00
cb27d14ecb
Allow adding a bus alias while one is selected
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7510
2021-02-13 10:55:45 -05:00
07e1ae1b56
Fix logic of global label ERC check
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7392
2021-02-13 10:29:31 -05:00
dbd749c07a
ERC warn if hierarchical labels have no matching sheet pin
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7511
2021-02-13 10:24:22 -05:00
7015f4cf75
Use full names for bus membership ERC checking
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7522
2021-02-13 10:09:16 -05:00
4f1592e5c1
Fix crash with empty undo stack
2021-02-13 06:41:10 -08:00
02c7fcdc84
Fix BreakWire tool
...
Adds ability to start new commit to eeschema, allowing all
AddItemsToUndoList to always append without foreknowledge. Keeps newly
split wires on the tool until placed
Fixes https://gitlab.com/kicad/code/kicad/issues/7512
2021-02-12 17:17:12 -08:00
8c2fe42ef0
More Undo/Redo Cleanup.
...
Don't need the reference point or container action type. Clearing this
command signatures to prevent future confusion/use
2021-02-12 11:26:48 -08:00
d244c09680
Cleanup undo/redo
...
Mirror/Rotate/etc were all just "Change" items in the undo/redo stack.
This removes the old calls
2021-02-12 10:25:14 -08:00
f54ab830f6
Add BOM file extension to BOM plugin command line
...
Attempt to parse BOM output file extension from BOM plugin header, and
append it to the "%O" argument in the BOM plugin command line.
Fixes #6943
2021-02-12 02:17:45 +00:00
32b12228fc
Use the right sheet when looking for pins to add to netlist
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7434
2021-02-11 20:50:26 -05:00
cea9e1b62c
Remove Eagle workaround for stacked NC pins
...
We no longer put stacked NC pins in the same net, so we do not require
this hack.
2021-02-11 16:47:21 -08:00
73ea0fc15e
Always upgrade to a stronger driver even if the path is longer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7492
2021-02-11 17:25:14 -05:00
8e9b457887
Make sure sheet pin connections get reset every time
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7499
2021-02-11 17:25:14 -05:00
1bec10b6fa
Make it easy to select small things overlapping symbols
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7487
2021-02-11 12:13:46 -05:00
a0b9b0c3ee
Improve IsSymbolEditable to differentiate fields.
...
Fields are editable in Aliases, but still not in Legacy libraries,
locked libraries, etc.
Fixes https://gitlab.com/kicad/code/kicad/issues/7175
2021-02-10 22:57:23 +00:00
1dc0ef01b3
Fix automatic wire tool in gridless mode
...
The automatic wire tool was not working in the gridless mode because the
grid snapping on/off logic present in `EE_GRID_HELPER`, based on the
value of `m_enableGrid`, was not taking into account that another check,
but for the global KiCad setting, would be performed in the `Align()`
method, which is inherited from `GRID_HELPER`.
I've modified all tests of `m_enableGrid` value to also take the global
setting into account, and moved checks for it to `Align()` method, as
it's more consistent this way.
I've also removed an override of the `Align()` method in the
`PCB_GRID_HELPER` class, as it was made redundant by my changes.
Fixes https://gitlab.com/kicad/code/kicad/issues/7402
2021-02-10 22:07:49 +00:00
7c06bdbd2e
CADSTAR Schematic Archive Importer: Fix parsing of TERMINAL_SHAPE
...
TRIANGLE shape and a few others do not have a "right length",
only a "length".
Fixes the error "Missing Parameter ‘2’ in ‘TRIANGLE’".
2021-02-10 18:49:21 +00:00
80d8974f87
CADSTAR Archive Importer: Fix loading of non-cadstar font text sizes
...
Non-cadstar fonts use a width of 0.
2021-02-10 18:49:20 +00:00
49bf957c48
CADSTAR Schematic Archive Importer: Fix positioning of global labels
...
Previous calculation did not take into account rotation of the labels
when calculating the final position.
2021-02-10 18:49:20 +00:00
0841f3ae25
CADSTAR Schematic Archive Importer: Fix wires (Implied connections)
...
There is an implied connection between elements in a net even though
there might not be a graphical connection in the file.
2021-02-10 18:49:20 +00:00
8add7a880d
CADSTAR Schematic Archive Importer: Fix positioning and margins
...
Fix calculation of sheet bounding box and sheet margins with the aim
of matching CADSTAR pdf output as closely as possible.
2021-02-10 18:49:20 +00:00
2c04d76ff4
Non-Kicad Schematic Importers: Do not reload all symbols after import
...
This is required to allow handling of pin swaps in the CADSTAR importer
2021-02-10 18:49:20 +00:00
cb90a4b7e6
CADSTAR Schematic Archive Importer: Handle Pin Swaps
...
Each schematic symbol instance can have pin numbers that diverge from
the pin number definitions in the library
2021-02-10 18:49:20 +00:00
4ea487936b
CADSTAR Schematic Archive Importer: Simplify symbol library name
2021-02-10 18:49:20 +00:00
552bb5821f
SCH_COMPONENT: Add `const` specifier to all constructor parameters
2021-02-10 18:49:20 +00:00
4dc264175a
CADSTAR Schematic Archive Importer: Symbol name is case insensitive
...
Fixes an issue on some designs that would not be able to find the
symbol definition referenced by the part due to different
capitalisation of the symbol name in the part definition and
the symbol definition.
2021-02-10 18:49:20 +00:00
914ae001b5
CADSTAR Schematic Archive Importer: Load pin types
...
Default to passive if undefined
2021-02-10 18:49:20 +00:00
f530b12c31
CADSTAR Schematic Archive Importer: Handle undefined pin number in part
...
Use terminal pin number (i.e. from the symbol definition) when the pin
number is undefined in the part.
This fixes a bug that resulted in symbols with "0" as the pin numbers.
2021-02-10 18:49:20 +00:00
cc27c31ab0
CADSTAR Schematic Archive Importer: Import common fields visibilities
...
Import field visibilities for Ref, Value and Part Name
Also fix incorrect loading of designator from previous commit
2021-02-10 18:49:20 +00:00
297ff282f1
CADSTAR Importer: Update copyright years and remove white spaces
2021-02-10 18:49:20 +00:00
bb6fee531e
CADSTAR Schematic Archive Importer: Correctly load symbol instances
...
Previous implementation was not loading all fields defined in the
library.
2021-02-10 18:49:20 +00:00
b0051c07cb
CADSTAR Schematic Archive Importer: Load all fields in symbols
...
- Load Fields in the library items as well as schematic instances
- Remove invalid characters (e.g. '\n', '\t', '\r') in fields
- Load footprint field (assume that the footprint library name
is the same as the filename of the schematic)
2021-02-10 18:49:20 +00:00
67ccee338e
Give cleanup to the move tool
...
For unknown reasons, the move tool was not clearing the stack when
called from the edit tool. This moves the call to move tool to after
clearing the edit tool from the stack. The move tool handles cleanup,
so we skip the original reason for waiting on the move tool before
finalizing the edit tool routines
Fixes https://gitlab.com/kicad/code/kicad/issues/7481
2021-02-10 10:01:05 -08:00
a30ae6a237
Pass un-pretty-printed bus names through menu help text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7412
2021-02-10 15:03:06 +00:00
05d2053ded
Put MSW bug fix back in.
2021-02-10 12:37:13 +00:00
909ebe4b78
Try to fix an annoying issue in DIALOG_SYMBOL_PROPERTIES on wxGTK.
...
In some cases selecting a field to change its value make this value invisible.
It happens until the dialog is resized, so I am guessing there is a problem
when initializing sizers settings.
2021-02-10 12:48:58 +01:00
048050c980
Eeschema: fix power flag getters and setters for inherited symbols.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7474
2021-02-09 19:11:13 -05:00
872184fe8b
Revert "Bump minimum required CMake version to 3.10"
...
This reverts commit a475f45753
2021-02-09 18:46:13 -05:00
09be44a352
Use Jeff's method+font for monospace
2021-02-09 12:14:17 -08:00
505844f68c
Generalize the Ctrl-Q to all frames
...
Rather than adding our handler to each frame separately, we initialize
the Ctrl-Q quit action at the base frame to be consistent
2021-02-09 11:43:42 -08:00
5ecef204cd
Coding policy fixes.
...
Using "this->" violates coding policy section 2.7.
2021-02-09 11:35:43 -05:00
618e824b0f
Cleanup includes and formatting.
2021-02-09 12:26:46 +00:00
488cfb9ec7
Update GAL options when loading viewer frame
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5941
2021-02-08 17:43:24 -08:00
6f0424d742
Use monospace font for textboxes
...
Matches the spacing of our stroke font so the tabs are correctly
displayed in WYSIWYG
Fixes https://gitlab.com/kicad/code/kicad/issues/1807
2021-02-08 15:59:58 -08:00
a475f45753
Bump minimum required CMake version to 3.10
...
This allows us to remove even more workarounds
2021-02-08 12:23:08 +00:00
356c2d3508
Symbol editor: fix symbol save as menu enable logic issue.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7451
2021-02-07 18:21:59 -05:00
d70cebcd62
Allow clicking on terminal point to finish a bus unfold.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7413
2021-02-07 00:31:00 +00:00
db66cd50d7
Use Save As icon for Save As action in symbol editor
2021-02-06 22:51:56 +00:00
97775aa50b
Icons: redo missed simulator icon in new style
2021-02-06 22:51:56 +00:00
c2dbd28101
Simplify and harmonize symbol editor and footprint editor menus.
...
Some differences are due to difference between libraries being files
in symbol editor and directories in footprint editor, but this unifies
most of the rest.
It also dispenses with the save-to-library vs save-to-document distinction
in the GUI because it makes for too much variability in the GUI, was
implemented differently between the two editors, and isn't needed as much
anymore now that we have the highly visible infobar.
There was also an issue that the save-to-board icon occupies the same
location and has the same size/shape/colours as the Board Setup icon in
PCBNew.
Fixes https://gitlab.com/kicad/code/kicad/issues/7215
2021-02-06 14:33:16 +00:00
f26b4058c2
Symbol editor: enable properties controls for inherited symbols.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7126
2021-02-06 08:28:06 -05:00
17b0117074
eeschema: fixing intersheet ref mirroring for global labels
...
Implementing Mirror{X,Y} overrides in SCH_GLOBALLABEL in order
to properly handle Intersheet Ref field mirroring.
Fixes: https://gitlab.com/kicad/code/kicad/issues/7225
2021-02-05 19:55:54 +00:00
2aa8a3724f
Don't continue until the move tool completes
...
Starting a new action (to add junctions) will break the move tool loop
and cancel placement. We need to wait until the tool completes before
choosing where to place the junctions
Fixes https://gitlab.com/kicad/code/kicad/issues/7421
2021-02-05 10:18:34 -08:00
2ad5108e7d
Don't depend on wxWidgets dotted and dashed line styles.
...
Turns out they're buggy on OSX.
Fixes https://gitlab.com/kicad/code/kicad/issues/7144
2021-02-05 16:18:28 +00:00
e8bcdfed29
Revert 2faf721360
...
Fix #7323
2021-02-05 07:12:23 -05:00
4c1b4b4159
Check normalize path result instead of blindly using it.
...
Fix #7323 again
2021-02-05 00:52:41 -05:00
b4a9792e23
Add a warning for hidden power pins.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6440
2021-02-04 22:47:37 +00:00
b48f29161e
Eeschema: cross probing pin from a pad clicked in Pcbnew: fix incorrect pos of cursor.
...
A transform coordinate was applied twice, breaking the position of the graphic cursor.
Fixes #7414
https://gitlab.com/kicad/code/kicad/issues/7414
2021-02-04 17:24:06 +01:00
658a5cf7ed
SCH_PIN::GetMsgPanelInfo(): fix missing initialization of Pin Number string
...
The displayed string was a old value, not related to the Pin Nummber
Fixes #7414
https://gitlab.com/kicad/code/kicad/issues/7414
2021-02-04 11:14:46 +01:00
62254309b0
Don't rotate fields if their parent is selected.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7410
2021-02-04 00:05:13 +00:00
2faf721360
Edit library table through backing table instead of grid.
...
While editing the grid works on OSX, it doesn't appear to on MSW or
GTK. Whether or not editing the backing table is any better or not
remains to be seen....
Fixes https://gitlab.com/kicad/code/kicad/issues/7323
2021-02-03 15:50:37 +00:00
c220913aa1
Handle y-axis inversion in Symbol Editor when drag-selecting text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7406
2021-02-03 15:28:11 +00:00
ff3441143e
Fix assert in setupUiConditions.
2021-02-03 14:40:19 +00:00
b07c8110c8
Follow grid snapping when moving
2021-02-02 20:23:12 -08:00
97194983cd
Select cells at a time
...
Selecting cells allows us to cut/paste from individual cells. This is
critical to be able to paste from spreadsheets and move columns around
2021-02-02 19:33:18 -08:00
238aa2b5b0
Snap to eeschema lines
...
Allows easier snapping to lines when drawing in eeschema.
Fixes https://gitlab.com/kicad/code/kicad/issues/7378
2021-02-02 19:33:18 -08:00
ea08f1b8cb
Update action short names for clarity
2021-02-02 19:33:18 -08:00
9aedeae5c3
Don't log error messages when using the clipboard
...
wxClipboard::GetData()and wxClipboard::SetData() both log a "wxLogSysError" error-level message (see for example: https://github.com/wxWidgets/wxWidgets/blob/v3.1.4/src/msw/clipbrd.cpp#L703 ). This logged message gets displayed as a messagebox to the user.
The logging can be disabled temporarily by creating a wxLogNull object. See https://docs.wxwidgets.org/3.0/classwx_log_null.html
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6956
2021-02-03 01:55:05 +00:00
1c6c0bf8cf
Null-ptr safety.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7266
2021-02-02 23:09:35 +00:00
8464add58c
Use GetSchSymbolLibraryName() when looking up symbol in schematic.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7301
2021-02-02 22:55:18 +00:00
b8e97bb6b6
Only apply B&W printer fixes when printing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7388
2021-02-02 15:37:30 +00:00
afad1625d7
Fix save-as extension of imported schematics
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7333
2021-02-01 18:34:59 +00:00
c11ded24cd
Add instrumentation to track down local issues in symbol library file code.
2021-02-01 12:57:16 -05:00
147c839857
Allow drag-select of fields.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6662
2021-02-01 17:14:30 +00:00
31fd49d444
Use the new nudge path for the symbol lib table, save global and project mru differently
2021-01-31 19:01:33 -05:00
ae5d2efe07
Snap common single-click tools
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7362
Fixes https://gitlab.com/kicad/code/kicad/issues/7363
2021-01-31 15:17:24 -08:00
bbb8173b61
Remove and re-add saved-as libraries when Syncing tree.
...
Also removes the aForce parameter as it was always true anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/7357
2021-01-31 23:00:17 +00:00
8567739a7a
Remove conditions from common immediate-mode keys
...
The conditions prevent use in immediate mode for common actions. While
this makes enable/disable easier in menu items, this fix is a patch
until we refactor the action framework to distinguish between immediate
mode hotkeys that should start without selections and menu items that
need a selection before running.
Fixes https://gitlab.com/kicad/code/kicad/issues/5333
2021-01-31 14:45:24 -08:00
de9da20bda
Fix broken html
2021-01-31 17:37:47 -05:00
b05bf34b77
Cleanup redundant if statement
2021-01-31 15:31:57 -05:00
2edcf42115
Symbol Editor IO_ERROR catching
...
Tests for read-only in table save routines and catches other IO_ERRORS.
Still returns a non-specific error message but prevents crashing when
erroring during save.
Fixes https://gitlab.com/kicad/code/kicad/issues/7352
2021-01-31 11:31:07 -08:00
dfc6070178
Unify schematic file version checking with PCBNew.
...
This also makes sure that the user gets a warning before saving over
an older s-expr format. While that won't always be wanted, it's now
in the infobar (like in PCBNew), so it's not too onerous.§
Fixes https://gitlab.com/kicad/code/kicad/issues/7347
2021-01-31 17:28:14 +00:00
a156acc6b0
Fix broken LIB_ITEM::Compare case
2021-01-31 11:48:05 -05:00
bfa8723bb6
Add uninitialized call
2021-01-31 11:45:17 -05:00
3380617836
Axis color fixes in symbol editor
...
- explicitly set axis color at symbol editor start
- force redraw of grid after axis color change
Fixes: https://gitlab.com/kicad/code/kicad/issues/7160
2021-01-31 15:28:37 +00:00
08a932a969
Add smarts to switch selection on right-click
...
Now looks at how hard it is to select the item (grids) and switches only
if the mouse is more than a grid square away and there is a new item
under the mouse.
Fixes https://gitlab.com/kicad/code/kicad/issues/4455
2021-01-31 07:00:48 -08:00
abf0a46dce
Refactor PICKER_TOOL and push up snapping disable functionality
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7348
2021-01-31 09:50:41 -05:00
c155218582
Sim plot: fix a rounding issue that can create a missing point in a plot.
...
Due to a truncation when converting a value to integer, the first point was
sometimes missing because it looked like out of plot range.
Fix also a cosmetic issue in dialog.
Fixes #7345
https://gitlab.com/kicad/code/kicad/issues/7345
2021-01-31 10:36:26 +01:00
8eca23aabe
Mark null project initial screen as zoom-initialized
...
The variable `m_Initialized` in `BASE_SCREEN` is used by
`SCH_EDIT_FRAME` to mark whether a screen had its zoom level initialized
by the "zoom to fit screen" action. When this variable is `false`, the
function `SCH_EDIT_FRAME::DisplayCurrentSheet()` performs "zoom to fit
screen", modifying the zoom level. This function is indirectly called in
the undo routines, so if `m_Initialized` is not set to `true`, a zoom
change will occur when the user undoes an operation, a behavior that is
undesired.
`m_Initialized` was not initialized to `true` for the null schematic
(the schematic that is loaded if no project is loaded), causing the
aforementioned undesired behavior.
To prevent this, I've changed the `SCH_EDIT_FRAME` constructor to set
`m_Initialized` to `true`, since it zooms to fit screen already. I've
moved `m_Initialized` from `BASE_SCREEN` to `SCH_SCREEN`, as it is used
only in Eeschema, and renamed it to `m_zoomInitialized`, a name I
believe that better describes what this variable does.
I've also introduced the function `SCH_EDIT_FRAME::initScreenZoom()` to
group the "zoom to fit screen" action with setting `m_Initialized` to
`true`, as they often should occur together.
I'd also like to say that I'm not confident whether
`SCH_EDIT_FRAME::DisplayCurrentSheet()` should perform the zoom level
initialization at this point, but I have decided to not change this
behavior for now, as the commit history suggests it's several years old.
Fixes https://gitlab.com/kicad/code/kicad/issues/7343
2021-01-31 00:49:11 +00:00
7737489e57
Symbol editor: don't allow new or imported symbols in read only libraries.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7334
2021-01-30 13:03:05 -05:00
41234a8373
Implement more precise annotation-required messages.
...
Also moves the message to an infobar so it's more noticeable.
Fixes https://gitlab.com/kicad/code/kicad/issues/7332
2021-01-30 16:31:27 +00:00
a235103e48
Redo pad & via painting (again).
...
New strategy isolates all draw/don't draw decisions to the ViewGetLOD
routines, and all dimmed/not dimmed to PCB_RENDER_SETTINGS::GetColor.
The actual drawing in PCB_PAINTER is more-or-less conditon free.
Also adds new layers for pad and via hole walls so that they can be
controlled for high-contrast mode.
Also changes the drawing paradigm so that the pads are drawn even when
not on the high contrast layer, just in low contrast. The hole wall
is drawn in high contrast. This actually makes things clearer to the
user (although to be honest was done to keep from having to re-render
pads when the high contrast layer changes since we have two separate
layers now that we can adjut colours on).
Fixes https://gitlab.com/kicad/code/kicad/issues/7328
2021-01-30 16:31:27 +00:00
1d12f3fe4a
Fix logic in selecting power symbols for net highlighting
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7339
2021-01-30 10:28:26 -05:00
619e128536
altium: Fix #6194 by no longer mirroring schematic text. Furthermore improve value parsing.
2021-01-30 15:44:32 +01:00
babda304d9
Prevent addition of false plot when current plot panel is not in m_plots
...
Without this commit, when `currentPlotWindow()` returned a valid
pointer, but one that is not used as a key in `m_plots`, it would get
inserted to the `m_plots` map. Because this pointer was not properly
initialized, a crash would later occur. I think this problem was
triggered by the pointer to welcome page, but I haven't checked.
Fixes https://gitlab.com/kicad/code/kicad/issues/7324
2021-01-30 02:04:57 +01:00
b64611af7a
Make highlight net flexible with grid
2021-01-29 14:28:26 -08:00
ea6dc0d730
Make auto-wire use snapping behavior
...
Forcing grid snap for the kick-start behavior loses snaps to pins that
may be desired. This also adds force-snapping in select mode to match
the user's auto-start preferences
Fixes https://gitlab.com/kicad/code/kicad/issues/7293
2021-01-29 14:09:33 -08:00
02954dfaa1
Fix another instance of modifying iterators
...
We cannot modify the ee_rtree while iterating over it without
invalidating the iterators
Fixes https://gitlab.com/kicad/code/kicad/issues/7331
2021-01-29 08:33:44 -08:00
540dd11b58
Use the file version when reading lib symbols from schematic file.
2021-01-28 21:31:33 +00:00
50b05aea4a
Thou shalt not set minimum width
2021-01-28 10:55:27 -08:00
78dbcdcdb7
Slight fixup to previous library browse change
2021-01-28 07:31:32 -05:00
69d58d39e5
Add alt pin table to compare function for LIB_PIN.
...
Also fixes refresh issue when editing alt pins.
Fixes https://gitlab.com/kicad/code/kicad/issues/7204
2021-01-28 11:35:18 +00:00
ff7742c6b8
File naming and include cleanup.
2021-01-28 11:35:18 +00:00
a373abd68a
Invert the new symbol library flow to push users to default to a different folder for global symbols
2021-01-28 00:40:21 -05:00
77bb36a482
Ensure local names of vector bus members are preserved
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7196
2021-01-27 21:53:04 -05:00
beb50c529e
Reorganize the CMake folder to separate build and configure steps
...
The BuildSteps folder now contains the CMake scripts that are
called during the build process as individual stages, while
the root CMakeModules directory contains the CMake files used
during the configuration phase.
2021-01-28 00:24:22 +00:00
e6dd95e83a
Create a default user projects folder
2021-01-27 19:12:18 -05:00
6a39b81647
Fix the last of broken Doxygen comment specifiers.
2021-01-27 17:39:44 -05:00
7d6a749285
Implement a more aggressive re-entrancy check for SCH drawing tools.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7259
2021-01-27 19:51:11 +00:00
df80f6484e
Use canonical names when exporting fields to netlist.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7300
2021-01-27 13:52:24 +00:00
df62adf901
eeschema,sim: fix crash at simulation start
...
fixes: https://gitlab.com/kicad/code/kicad/-/issues/7277
2021-01-26 23:29:05 +00:00
0967f8fc78
Fix typo.
2021-01-26 23:17:30 +00:00
de1c3a83fd
Hittesting for background-body-filled shapes (and other fills).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7286
2021-01-26 23:17:30 +00:00
0dd65d9cd1
Naming conventions and file order.
2021-01-26 23:17:30 +00:00
06f85471a4
Fix copy/paste error.
2021-01-26 19:01:31 +00:00
f3047829e5
Mark document dirty after drag; don't wait for point editor deactivation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7285
2021-01-26 19:01:31 +00:00
1598e870b6
Insert the same unit on all sheet instances when adding a symbol
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5898 (C)
2021-01-26 18:12:49 +00:00
2e21489acf
Copy unit numbers to symbol instances when pasting sheets
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5898 (B)
2021-01-26 18:12:49 +00:00
4bcd56b1f6
Always include unit number when copying to clipboard
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5898 (A)
2021-01-26 18:12:49 +00:00
4619d5e112
Fix more broken Doxygen comment specifiers.
2021-01-26 12:17:52 -05:00
3702f2e0a9
Add uuid r/w for sch pins, text, wires, etc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7269
2021-01-26 10:56:19 +00:00
b576ccef61
Don't double-up tools on tool stack.
...
Also make sure move tool gets cancelled by other tools being
activated.
Fixes https://gitlab.com/kicad/code/kicad/issues/7259
2021-01-26 10:56:19 +00:00
6a48e21eb2
simulator: update dialog to handle R, I & TEMP DC sweeps
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2370
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6195
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2386
2021-01-25 21:29:13 +00:00
f6b7817044
Init intersheet refs props when converting to global label.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7252
2021-01-25 13:20:16 +00:00
9f18fee124
Fix ERC for nets with power input and input pins
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7264
2021-01-24 22:17:56 -05:00
8dfd297ee2
Show all pages for intersheet refs, and use IDs in hypertext menu.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7253
2021-01-25 00:55:38 +00:00
0a1a5ea669
Fold annotation error reporting into ERC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6938
2021-01-24 23:01:24 +00:00
8ad448cbbc
Don't leave point editor running when moving things in eeschema
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7227
2021-01-24 12:59:42 -05:00
09bd66477d
Make sure sheet field parents are up to date
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7251
2021-01-24 12:59:42 -05:00
b2cd1fddf9
Prevent invalidating iterators
...
When iterating over RTree, we cannot modify the RTree without
invalidating our iterators, so we use a temporary structure to hold the
schematic items
Fixes https://gitlab.com/kicad/code/kicad/issues/7228
2021-01-23 13:41:00 -08:00
df2d0962c6
Drop hover selection in Symbol Editor after edit action.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7234
2021-01-23 17:12:34 +00:00
d770284fa2
Add a bus instead of a wire for bus junctions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7231
2021-01-23 17:04:44 +00:00
7a8a099259
Bump SCH file format version for "unconnected" -> "no_connect".
2021-01-23 17:04:44 +00:00
Jeff Young
Mario Luzeiro
Mikolaj Wielgus
Julian Fellinger
Thomas Pointhuber
Wayne Stambaugh
Jon Evans
jean-pierre charras
Marek Roszko
Jonathan Haas
Dominik Wernberger
Franck Jullien
Jonatan Liljedahl
Graham Keeth
PJM
WhiteChairFromIkea
Ian McInerney
Sylwester Kocjan
Roberto Fernandez Bautista
Seth Hillbrand
James Jackson
Zoltan Gyarmati
Simon Richter
Michael Kavanagh
RigoLigoRLC
david-beinder
Sylwester Kocjan