879254abff
Remove track min width from the status bar.
...
It presents an over-simplified picture. Better to use Inspect >
Constraints Resolution....
Fixes https://gitlab.com/kicad/code/kicad/issues/9623
2021-11-12 17:31:50 +00:00
fd6a75b779
Do not call TransformToPoly for negative sized PADs
2021-11-12 15:40:08 +00:00
b46b27fe8c
Altium import: Avoid illegal filenames when writing embedded 3D models
2021-11-12 14:49:22 +00:00
a9b4465703
Altium import: Use UTF16 string table for PCB texts
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7948
2021-11-12 14:49:22 +00:00
992fc83870
Pcbnew: fix GenCAD exporter bug.
...
The chamfered rectangle pad coordinate export was in the absolute board
position instead of relative to the footprint origin which GenCAD expects.
This fixes KSC ticket #413 .
2021-11-11 17:31:52 -05:00
8ec3ce99ae
PNS: Update shover when autocompleting on item
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9598
2021-11-10 18:17:56 -05:00
13f081549c
CADSTAR PCB: Use all User layers when mapping documentation layers
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9577
2021-11-10 21:47:22 +00:00
ad2e780a2c
CADSTAR PCB: Correctly load pads with holes
...
If the THROUGH_HOLE attribute isn't set, it just means that the pads
are only present on one side of the board, but there can still be a
plated / non-plated hole.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9579
2021-11-10 21:21:32 +00:00
f6c160eb50
Apply a big hammer for python script refreshing.
...
While not ideal, this should tide us over until we have a commit
architecture for python scripts.
Fixes https://gitlab.com/kicad/code/kicad/issues/7065
2021-11-09 18:47:47 -05:00
0dcbfa2b69
Always use UUIDs for implicit keepout rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9580
2021-11-09 17:57:47 +00:00
c0a6014114
Save actual control values; GetOriginalText is only for eval.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9575
2021-11-09 13:53:03 +00:00
0631c8fc74
Fix logic bug when updating circular pad points.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9576
2021-11-09 13:14:24 +00:00
18d9f6e323
Reduce auto.
2021-11-09 13:14:24 +00:00
59807d8d26
A better solution to discarding pending shove operations
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9553
2021-11-09 00:00:54 -05:00
0234ae3003
Add CloneFrom API for BOARD_DESIGN_SETTINGS in SWIG
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6885
2021-11-08 23:01:24 -05:00
75d75799f7
Move to getters/setters for aux and grid origin
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8836
2021-11-08 22:36:40 -05:00
6cc6f06a9a
Millimetres -> Millimeters
2021-11-08 15:56:51 -08:00
6569337d27
Haching -> Hatching
2021-11-08 15:56:51 -08:00
2f1a3827cf
Solder paster -> Solder paste
2021-11-08 15:56:51 -08:00
6af031be05
Use double-quotes for rule expressions.
...
The Mac double-quote bug is now fixed and strings inside expressions
are single quoted making single-quoting the entire expression pretty
hard to visually parse.
2021-11-08 20:53:59 +00:00
b1e8241ebe
Update pin type as well as function from existing when updating fp.
2021-11-08 20:53:59 +00:00
d0014a307d
Reduce the artificial gravity for selecting vias by a bit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9563
2021-11-08 20:53:59 +00:00
81fc7c71d1
Handle blind/buried vias in Eagle import
...
Don't sanitize layers before setting type
Fixes https://gitlab.com/kicad/code/kicad/issues/9557
2021-11-08 12:46:54 -08:00
7fd669b6a8
Use green soldermask and white silkcreen when unspecified
...
Also - unspecify colour of soldermask by default
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9538
2021-11-07 15:35:14 +00:00
dbad85d405
Remove instances of "auto".
2021-11-07 14:12:44 +00:00
97e9348ee1
Fix typo "verical" -> "vertical"
2021-11-06 20:39:19 +00:00
8f0b61715b
Fix tooltip about Edge.Cuts (not) being plotted on all layers, remove period
2021-11-05 23:38:14 +00:00
6aa7602c32
CADSTAR PCB: Reverse anticlockwise arcs before adding to the chain
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9533
2021-11-05 17:13:02 +00:00
8314251fa1
CADSTAR PCB: Force white silkscreen and green soldermask
...
We don't know the actual colour from the design, but this is the most
common used in the industry.
2021-11-05 17:13:02 +00:00
93e163b98d
Do not replace delimiter " by ' inside a command string.
...
Fixes #9528
https://gitlab.com/kicad/code/kicad/issues/9528
2021-11-05 13:24:38 +01:00
792a8dca9d
Fix errant wxassert about expand and center align
2021-11-04 22:55:40 -04:00
393c84e67a
Fix sketch mode rendering of beziers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9522
2021-11-04 12:57:16 +00:00
cf6b18ec7e
Remove escaped double-quotes
...
For some reason, escaped double quotes in wxString::Format cause issues
on Mac. We can replace them with single quotes in most places without
loss of clarity
2021-11-03 17:03:14 -07:00
b022b314a4
Account for pad hole is BBox
...
The bounding box is used for hit testing. If the hole is arbitrarily
larger than the pad, we need to allow the user to properly select it
2021-11-03 14:33:44 -07:00
ffd1139cfe
Make sure a pad is at least as big as its hole in the RTree.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9516
2021-11-03 18:53:26 +00:00
762cd5a32f
Add PLACE_FILE_EXPORTER to swig to call in python
2021-11-03 16:32:05 +00:00
6b432e895a
DIALOG_COPPER_ZONE_BASE: fix incorrect max value of zone priority.
2021-11-03 11:49:38 +01:00
64f77b3596
PNS: Add support for 90-degree corner modes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6902
2021-11-03 02:14:23 +00:00
522359ccbf
Improve comments.
2021-11-02 20:07:34 +00:00
3c78bf4ef8
One active point at a time.
2021-11-01 16:17:33 +00:00
f4cd57f815
Reserve production strings
2021-11-01 07:14:38 -07:00
153594b9ea
PNS: Actually implement the AbortRouting API
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9425
2021-10-31 16:06:57 -04:00
22ba640c2b
Remove locking from footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9496
2021-10-31 16:33:03 +00:00
e3ef101ec9
Add missing view controls for FP Editor Appearance Manager.
2021-10-31 16:33:03 +00:00
b2db24f275
CADSTAR PCB: Don't invert Text Angle for mirrored text
...
It matches the original cadstar when we don't invert
2021-10-30 18:14:23 +01:00
d4537b6f53
Coverity issue fix.
...
Remove uninitialized member variable as it was unused rather than
initialize it which would have made Coverity happy.
2021-10-30 11:52:06 -04:00
5f8e0ef1e0
Patch up arc hit-testing and printing for 6.0
...
This could use another look when we're not so near release. We
really shouldn't need to special case eeWinding vs. not eeWinding.
Fixes https://gitlab.com/kicad/code/kicad/issues/9491
2021-10-30 15:10:07 +01:00
08700e3522
Router: show corner style in message panel
2021-10-30 09:08:52 -04:00
08bf28b95d
Fix disabling free-angle mode
2021-10-30 09:08:35 -04:00
e6c3027531
Action string typo fixes
2021-10-30 08:47:36 -04:00
48be569a29
DIALOG_PAD_PROPERTIES: use our UNIT_BINDER to manage pad rotation and remove
...
the wxFloatingPointValidator (that has also issues with fp separator).
Try to fix a bug related to pad rotation in some locales (see bug 9331).
2021-10-30 12:39:33 +02:00
08938463f1
Fix off-by-one error in via sizes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9486
2021-10-29 20:45:42 +01:00
ffddefc532
Minor dialog layout improvements.
2021-10-29 15:29:49 -04:00
63d4d84aaa
pcbnew, router: fix a crash and some other issues related to microvias and blind/buried vias
...
- fix crash when trying to create a microvia from a internal layer (boards with > 4 layers)
- fix a bug that allowed to create a non through hole via on only one layer
- fix a bug that allowed to create a microvia on non adjacent layer pair
- when placing a via and selecting the target layer from dialog, show only allowed layers.
Fixes #9477
https://gitlab.com/kicad/code/kicad/issues/9477
2021-10-29 17:54:04 +02:00
71b07b59c5
Pcbnew: Added "All Items" clear/set to "Filter Selection" dialog
2021-10-29 09:56:14 +00:00
c47e5ce577
Improve clearance outline tooltip.
2021-10-29 00:17:06 +01:00
1abd45ac15
Report nets on pads.
2021-10-29 00:17:06 +01:00
4afb59fda0
Added feature to switch between router modes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9414
2021-10-28 22:46:05 +00:00
1dbe8442b1
fp editor: fix crash (null pointer) when trying to drag an item.
...
(there is no roter tool in fp editor)
Fixes #9476
https://gitlab.com/kicad/code/kicad/issues/9476
2021-10-28 11:51:04 +02:00
4a9b3d9673
PNS: clear leftover vias from previous trace in DP placer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9283
2021-10-27 21:58:42 -04:00
e9661161d2
Fix missing member variable in swap().
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9470
2021-10-27 21:57:20 +01:00
54be0da33d
Pcbnew: minor plot dialog improvements.
2021-10-27 11:36:43 -04:00
4fe025909d
Fix centered rotated text in Pcbnew Eagle importer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9466
2021-10-27 14:38:42 +01:00
e12f9a194d
Fix Eagle arc importing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9466
2021-10-27 02:36:43 +01:00
0c99c99e12
Do not assign priorities to rule areas
...
As noted by @jeffyoung, we shouldn't set priorities to rule areas as
this can expose unexpected issues
Related to https://gitlab.com/kicad/code/kicad/-/issues/7776
2021-10-26 11:16:04 -07:00
5b9519da6c
Fix arc formatting in Fabmaster import.
2021-10-26 17:52:10 +01:00
341b0a5652
Don't depend on a keepout zone having no priority.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7776
2021-10-26 17:20:09 +01:00
c13ff9cec9
Formatting.
2021-10-26 17:19:30 +01:00
f724fe7eff
Move bbox padding to RTrees so it doesn't interfere with hittesting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9361
2021-10-26 13:46:30 +01:00
1f7fd436a2
Move board object polygon code into the object source files.
...
Having the board object polygon code all defined in a separate file made
finding the polygon code for an object difficult to find.
2021-10-25 17:42:11 -04:00
a79a221257
Array creator tool: Add option to assign unique reference designators
...
ADDED: Option to assign unique reference designators to footprints
created with the array tool [pcbnew]
CHANGED: Array creator dialog no longer displays pad numbering properties
when in the board editor. [pcbnew]
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2354
2021-10-25 22:38:49 +01:00
36d11f745e
Update ratsnest while dragging footprints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9391
2021-10-25 21:45:30 +01:00
7812dc1a67
Fix hard-coded limit to dp choice
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9459
2021-10-25 10:45:59 -07:00
ea4e06124e
Edit library footprint command
...
Provides missing PCB_ACTION for the edit library footprint command. This is
needed for python control of the command
Fixes https://gitlab.com/kicad/code/kicad/issues/9454
2021-10-25 09:25:37 -07:00
bba742b804
pcbnew: support vertex line start/end width to correctly import certain DXF files
2021-10-25 17:39:09 +02:00
df47c1c4e9
pcbnew: use doubles to pass line widths in the DXF importer as they are expressed in DXF's units and can case severe rounding errors when passed as ints
2021-10-25 17:36:04 +02:00
8a3bc3fe4d
Don't translate empty strings
...
The _( "" ) msgid is reserved in gettext, so we need to avoid it in code
2021-10-25 06:24:06 -07:00
5475303ec2
Allow loading secondary boards from Python
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9271
2021-10-24 14:06:38 -04:00
d202b78dc4
Fix disable warnings to be compatible
...
GCC and Clang both support the short mnemonic `-w` to disable warnings,
so use that to be compatible
Fixes https://gitlab.com/kicad/code/kicad/issues/9446
2021-10-24 07:30:39 -07:00
c9d858eaf5
Add status bar message for constraint mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9282
2021-10-24 14:04:12 +01:00
328d3d0d77
PNS: Fix rule resolution when starting from PTH
...
Have to use the routing start layer, not the first
layer of the PTH, to get the appropriate sizes
2021-10-23 22:46:31 -04:00
3b18dce911
Remove vestigal setting
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9444
2021-10-23 22:12:25 -04:00
e950278637
Don't initiate a drag if the router is already active
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9277
2021-10-23 19:01:25 +01:00
25c8b58e68
DIALOG_COPPER_ZONE_BASE: fix bug that prevents entering a value in Smoothing amount.
2021-10-23 15:16:37 +02:00
e30d867439
Use consistent terminology for various constraint modes.
2021-10-23 12:18:08 +01:00
90eff6c6a2
Prevent assert when sorting non-existant layer.
2021-10-23 11:53:03 +01:00
987d64c88e
pcbnew graphics import: Fix arc winding direction
2021-10-23 11:02:00 +01:00
fecb53b64f
Clean up removal of separate front & back footprint text visibility.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9441
2021-10-22 21:14:15 +01:00
d44e0ab765
Limit use of non-copper layers
...
When importing, we should not use Eco1 for other purposes as the
importer uses it to place unknown layer objects. We also need to avoid
placing objects on the courtyard layers that do not relate to the layer
purpose in DRC
Fixes https://gitlab.com/kicad/code/kicad/issues/9442
2021-10-22 12:31:11 -07:00
8cbdf5ba12
Keep default pad number up-to-date (in both directions).
...
Also hides the net selector when in the footprint editor as it has
no meaning there. (We still only grey it out for the board editor
when the pad type has no net to keep things from coming and going too
much.)
Fixes https://gitlab.com/kicad/code/kicad/issues/9317
2021-10-22 19:58:36 +01:00
06b9d774c0
Expose PCB_TRACK vector as a SWIG proxy object
...
Allows to use Connectivity `GetConnectedTracks()` in Python.
This is in line with `GetConnectedPads()`, and with pcbnew v5.1 where
GetConnectedTracks was also usable from Python.
Fixes https://gitlab.com/kicad/code/kicad/issues/9435
2021-10-22 16:00:18 +00:00
0bdb424215
FootprintWizardBase.py: fix Arc building due to recent code changes.
...
Add a arc_test wizard (only to test arcs in fp).
2021-10-22 10:07:31 +02:00
6c0110ecd3
Naming conventions.
...
There's nothing "legacy" about the OpenGL 3D renderer.
2021-10-21 14:30:03 +01:00
0fd762dc25
Make 3D dialogs easier to find.
2021-10-21 14:30:03 +01:00
0795fcb810
Minor dialog layout fixes.
2021-10-21 08:59:55 -04:00
b1f17dc927
Don't let the polygon routines collapse on a zero line width.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9418
2021-10-20 12:29:07 +01:00
09a2701136
Fix arc angle calculation and python API for it
...
1. It's impossible to use methods that modify parameters in swig so
I extend it in wrapper
2. Simplify GetArcAngle() and fix the bug where it lies about 360
degree arc to be 0 degrees.
2021-10-20 10:38:42 +00:00
463b82cf46
Be very careful when "doing what I mean".
...
Just wanting a SMD pad isn't enough -- the user may have already
set SMD settings into the master pad and changing the SizeX is
then very unexpected. Make sure the settings directly conflict
before making any "do what I mean" adjustments.
Also fixes the parent-footprint info when no parent exists.
Also gives a better title to the dialog when used to edit the masterPad
properties.
Fixes https://gitlab.com/kicad/code/kicad/issues/9427
2021-10-20 08:59:25 +01:00
b37664092d
DIALOG_GLOBAL_DELETION: enable graphic items filters when board outlines is enabled.
2021-10-20 09:16:40 +02:00
2a6c73b8df
Check for hole before highlighting
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9423
2021-10-19 11:25:00 -07:00
57f907f6e7
Make sure PCB_PARSER is fully initialized between footprints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9424
2021-10-19 17:14:04 +01:00
40e6a9a926
Fp editor: add DRC test for through hole pads without hole.
2021-10-19 14:47:29 +02:00
fb5fef9f5f
Remove extraneous Raise() from DRC cross-probe
...
Scroll-to-show on GTK relies on the idle handler but this is interrupted
by a Raise and not revisited. Since the Dialog is always on top of the
editor, Raise is not needed to view the referenced error
Fixes https://gitlab.com/kicad/code/kicad/issues/7246
2021-10-18 17:16:36 -07:00
5af813c69f
Remove extra handler
...
The extra handler intercepted the action before it could be handled
properly changing the board design settings
Fixes https://gitlab.com/kicad/code/kicad/issues/9410
2021-10-18 15:08:22 -07:00
29b851dce1
Tighten up ecea2e4279
2021-10-18 13:44:19 -07:00
ecea2e4279
pcbnew: Add window title to "Find" dialog
2021-10-18 20:39:37 +00:00
e9205a0740
Fix mistaken comparison in highlighting
...
Need to compare between elements colliding
Fixes https://gitlab.com/kicad/code/kicad/issues/9413
2021-10-18 13:38:27 -07:00
856cc26d4c
Allow vias the same same-net waiver that pads have for hole clearance
...
Note that in 7.0 we have physical_hole_clearance rules to give a bit
more expressivity here.
Fixes https://gitlab.com/kicad/code/kicad/issues/9420
2021-10-18 18:09:40 +01:00
0826c26a18
Fix a few minor dialog issues.
2021-10-18 18:09:40 +01:00
10ac675905
Fix shadowing
2021-10-18 09:00:24 -07:00
cee9e417ec
Fix mirroring arcs in footprints
...
Fixes #9417
https://gitlab.com/kicad/code/kicad/issues/9417
2021-10-18 17:10:39 +02:00
5817a8b5f4
Remove unused m_host variable
...
This variable isn't needed anymore after 5f53019290
2021-10-18 00:29:40 +01:00
99442350a4
CADSTAR PCB: Fix loading of arc tracks following recent PCB_ARC changes
...
We no longer have any knowledge of the original start/end of the arc,
since SetArcAngleAndEnd swaps the start and end to ensure the arc is
always clockwise at the end.
Adds a method EDA_SHAPE::EndsSwapped() to notify whether the start/end
point of the shape were swapped.
2021-10-17 17:57:51 +01:00
6db0216dd4
Bring back python compatibility constants for SHAPE_T
...
They were removed in a41944020d
2021-10-17 03:21:47 -07:00
b44a14a472
Plot custom pads with pad anchor size = 0.
...
A pad anchor size = 0 is allowed in 5.99 version (not in 5.1 versions)
Fixes #9408
https://gitlab.com/kicad/code/kicad/issues/9408
2021-10-17 11:01:38 +02:00
e867a4fd27
CADSTAR PCB: Fix Zone fill priorities
...
The algorithm now correctly determines fill priorities when the zone
outlines are close together and within the minimum clearance between
zones.
2021-10-16 21:50:56 +01:00
57d0cbcefa
Fix python QA
2021-10-15 13:50:36 -07:00
b88473e41f
Respect context layer in eval
...
When testing for a specific layer context, we should only return true if
the item either exists on that layer or if the context layer is
UNDEFINED_LAYER, meaning the layer value is not material to the test
Relates to https://gitlab.com/kicad/code/kicad/-/issues/9366
2021-10-15 10:35:29 -07:00
f9861b4a6c
Finish arc rework and push out to file formats.
2021-10-15 12:45:43 +01:00
b52529521e
Replace individual LIB_* shapes with LIB_SHAPE (based on EDA_SHAPE).
...
Also moves to more capable FILL_T model that can be shared.
2021-10-15 12:45:43 +01:00
9b9e379aa0
Overhaul arc internal model to not over-specify information.
2021-10-15 12:45:43 +01:00
8b08c9e53f
Shorter names before things get out of hand.
...
Also, remove comments indicating CURVE is a Bezier. Just call it a
BEZIER.
2021-10-15 12:45:43 +01:00
a41944020d
Push most of PCB_SHAPE impl down in to EDA_SHAPE.
2021-10-15 12:45:43 +01:00
0533196294
Fix Coverity warnings
2021-10-15 09:24:16 +02:00
faba2b06c2
Lock track width after placing segment
...
We don't want to allow the full track width to change after placing a
segment when we are in follow-segment mode. This would require either
ripping up and re-solving the existing track or allowing potential DRC
errors.
Fixes https://gitlab.com/kicad/code/kicad/issues/9395
2021-10-14 09:21:14 -07:00
07b9e2ee51
Fix errant debug message
...
__WXDEBUG__ is only for internal WX debugging and is always enabled even
on release builds because it is defined to be 0, 1 or 2. Use DEBUG to
limit to debug builds
Fixes https://gitlab.com/kicad/code/kicad/issues/9392
2021-10-13 09:16:55 -07:00
95ec23247c
Initialize zone vars in CTOR
2021-10-13 08:59:48 -07:00
5a6f230a2c
Delete full track needs proper scoping
...
This should not run if the action is "Cut". Additionally, we need to
transfer the expanded selection to selectionCopy in order for it to
proceed with the deletion. There is also no need for this to be limited
to the Hover action, so this section was removed.
Fixes https://gitlab.com/kicad/code/kicad/issues/9385
2021-10-12 13:47:16 -07:00
35e90d0cf4
Allow changing router mode while routing
...
Keeps shove active even when not using to allow switching modes during
routing.
Fixes https://gitlab.com/kicad/code/kicad/issues/9342
2021-10-12 09:55:34 -07:00
7f1247a23c
Update track width when changed
...
Tracks starting from pads should change in response to the track width
changing despite having the "follow existing track" width selected.
2021-10-12 09:55:34 -07:00
5f53019290
Substitute all wxHtmlWindow with HTML_WINDOW
...
Remove other places where <body> tag is used to override the default
black-on-white theme.
2021-10-12 07:07:15 +00:00
1b7358f93a
Import layer settings before swapping boards
...
The rebuildLayerStackPanel() reads from the current board to setup the
panel. We maintain the board swap until after the setup is completed
Fixes https://gitlab.com/kicad/code/kicad/issues/9370
2021-10-11 11:47:22 -07:00
58f553a9ca
Check for layer when DRC on vias and non-zone items
...
We were already checking for zone-zone overlap but missing checks when
running against (possibly) buried vias as well as the general check
Fixes https://gitlab.com/kicad/code/kicad/issues/9366
2021-10-11 10:33:50 -07:00
fce054319c
Update DRC MatchDPSuffix routine
...
This matches the router matchDPSuffix routine until we merge the two
into a common utility
2021-10-11 10:33:50 -07:00
43e59b0ea7
CADSTAR PCB: Correctly handle associated pad ids and PCB Only pads
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9372
2021-10-11 18:30:20 +01:00
7a71ebf9ac
CADSTAR PCB: Load all three net properties into a single Netclass
...
The final netclass name will be a bit long but it will allow for custom
DRC rules to individually target each of the three properties available
in CADSTAR:
- Route Code (which specifies width of the track in min, max, opt)
- Net class (only used in signal integrity analysis)
- Spacing class (for specifying clearance requirements between classes)
2021-10-10 22:16:08 +01:00
e9030283cc
Fix formatting
2021-10-10 22:16:08 +01:00
93bbad6acf
Allow snapping in pickReferencePoint
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9354
2021-10-10 08:53:10 -07:00
62cb5d9354
Fully cancel copy with reference
...
Tool needs to be popped when cancelling to allow selection tool to work properly.
Fixes https://gitlab.com/kicad/code/kicad/issues/9353
2021-10-10 08:31:18 -07:00
4d89061d4c
Support footprint arcs in convert to polygon
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9352
2021-10-10 16:26:23 +01:00
6620831d38
Clear edited point when exiting point editor
...
Failing to clear this will prevent selection where tools check for
edited points before processing mouse button down events
Fixes https://gitlab.com/kicad/code/kicad/issues/9357
2021-10-10 08:25:50 -07:00
0fa8e1f311
DRC Control: Clear pointer to MARKER after it has been centered
...
Also, added asserts to verify SelectMarker and CenterMarker actually
do select one.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9344
2021-10-10 16:22:04 +01:00
593324bbaa
Do not use non ASCII7 chars in English strings.
...
Fix UTF8 to unicode conversion issue.
Fixes #9356
https://gitlab.com/kicad/code/kicad/issues/9356
Fixes #9355
https://gitlab.com/kicad/code/kicad/issues/9355
2021-10-10 10:32:31 +02:00
ac3ade874e
CADSTAR PCB: Set Copper-to-Hole clearance as 0
...
Testing suggests that CADSTAR doesn't actually have any clearance to the
hole (other than electrical clearance to the barrel of the padstack/
viastack).
This removes a large amount of DRC violations on imported designs.
2021-10-10 00:20:13 +01:00
eb7d0fdf8a
CADSTAR PCB: Use board clearance + additional isolation as zone clearance
...
Copper-to-copper clearance is too onerous and results in large amount
of DRC errors for the majority of imported designs.
2021-10-10 00:18:36 +01:00
f4ff01a5ab
CADSTAR PCB: Copy default netclass settings when creating new ones
...
Ensures that the global clearance is preserved in the newly created
netclass.
2021-10-09 23:10:55 +01:00
41e7284fdc
Speed up pcbnew loading/updating
...
Rather than detaching and re-attaching the layer panels with the
attendant overhead, we keep each panel intact and only update its
contents. Since the bindings are the same, this saves substantial time
on pcb loading as well as when closing the board setup dialog
2021-10-09 13:38:35 -07:00
8f74085ca4
CADSTAR PCB: Handle older boards without construction layers
...
Use KiCad default stackup for older CADSTAR boards that do not
define any dielectric layers between the electrical layers.
Also fix default stackup calculation to ensure finished board thickness
is 1.6mm
2021-10-09 21:26:16 +01:00
d62a5ecf46
Remove unused GetPcbThickness() function in PANEL_SETUP_BOARD_STACKUP
...
The function used now is computeBoardThickness()
2021-10-09 20:35:10 +01:00
33a3cfc87b
CADSTAR PCB: Update Board Design Settings to notify that a stackup exists
...
Also update thickness of the PCB
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9307
2021-10-09 20:33:14 +01:00
e80a1c2679
CADSTAR PCB: Don't load items on invalid layers
...
This was happening in two cases:
- Loading documentation symbols (CADSTAR on purpose defines these in an
invalid layer)
- When an item was in a "layer set" such as ALLELEC or ALLLAYER - need to
make sure we remove the copper layers that are not active in the design
2021-10-09 20:07:23 +01:00
895f4ca989
Cleanup 3D model filename validation
...
Don't veto the changed event anymore and instead just display the
feedback in the error column of the grid.
2021-10-08 22:30:20 +01:00
8d71bdc3e1
Cleanup unit handling in the stackup drawing tool
2021-10-08 22:30:20 +01:00
677166f0b8
CADSTAR PCB: Rule Areas have zero width
...
Cadstar areas have a line width but this is only for display purposes.
Instead CADSTAR uses the center line when determining whether a DRC
violation occurred.
2021-10-08 21:27:32 +01:00
2dfbd42be6
CADSTAR PCB: Legacy netclass and design settings loading is required
2021-10-08 20:48:10 +01:00
ae0229b7c9
CADSTAR PCB: Add imported nets to the imported netclass.
2021-10-08 20:25:09 +01:00
58fc4f512d
CADSTAR PCB: Don't create zero width tracks
...
Fixes a bug in the route offsetting part of the import
that was resulting in zero-width tracks being imported.
2021-10-08 20:25:09 +01:00
16b61e47cd
CADSTAR PCB: Clear arcs from polys before boolean ops (e.g. zone fills)
2021-10-08 20:25:09 +01:00
fb588da875
CADSTAR PCB: Fix loading of thermal relief gap in zones
...
We were loading as solid fill when the relief gap was exactly the
same as the minimum width.
Also we can do better than just load as solid fill when it is smaller:
we can instead just use the minimum width and at least it still will
have thermal reliefs.
2021-10-08 17:39:08 +01:00
4d6b1a4e36
pns_diff_pair_placer: fix empty message when a signal of a pair is not found.
...
Fixes #9334
https://gitlab.com/kicad/code/kicad/issues/9334
2021-10-08 14:57:01 +02:00
cb47bf25c0
CADSTAR PCB: Actually load the original route code as a KiCad NETCLASS
...
We weren't actually loading it into the design settings even though
everything else was already being correctly loaded.
2021-10-07 22:13:06 +01:00
f9c83dbc44
Fix footprint type memory
...
The flags don't map quite right, so we keep the memory of the drop-down
and translate to flags. This protects against flag values changing
2021-10-07 11:29:51 -07:00
51d3440c38
Use footprint type to inform new pad type
...
Makes usage cleaner. If the user specifies that they are creating an
SMD, they should get SMD pads by default so that they don't have to
change them later.
Fixes https://gitlab.com/kicad/code/kicad/issues/9333
2021-10-07 11:10:26 -07:00
57c7d663b0
Fix bone-headed mistake when moving panel disabling.
2021-10-07 00:17:42 +01:00
ad85f8078a
Reverse escaping when transferring multi-line
...
We escape the strings coming out of the DIALOG_TEXT_PROPERTIES window,
so we need to unescape the ones coming in
Fixes https://gitlab.com/kicad/code/kicad/issues/9327
2021-10-06 13:25:03 -07:00
a8ec3b58ed
Use via's real drill value for hole size
...
If the via drill is "Default" be sure to get the default value rather
than the placeholder
Fixes https://gitlab.com/kicad/code/kicad/issues/9313
2021-10-06 11:00:58 -07:00
1bb5fc3fd6
Work around EnsureVisible bug in wxWidgets during DRC cross-probe.
...
Also adds double-click-marker to open DRC dialog and select marker
in list.
Fixes https://gitlab.com/kicad/code/kicad/issues/7246
2021-10-06 11:17:03 +01:00
95f841a037
A more nuanced method of making Board & Schematic Setup read-only.
...
This one still allows you to scroll to see all contents.
Fixes https://gitlab.com/kicad/code/kicad/issues/9302
2021-10-06 11:16:46 +01:00
9a8d1246cc
We don't keep a CHANGELOG.TXT
...
Direct interested readers to AUTHORS.TXT instead.
2021-10-05 19:46:53 -07:00
548e5f49bd
Clean up unused variable usage
...
Unused variables in function calls can be commented out. Unused
return variables get a new routine `ignore_unused()` that silences the
warnings with zero overhead.
2021-10-05 10:00:30 -07:00
92008a089a
Disable Board & Schematic Setup controls when project is locked.
...
(or missing).
Fixes https://gitlab.com/kicad/code/kicad/issues/9302
2021-10-04 16:47:27 +01:00
ffd6fde700
Improve consistency and hotkey access in Appearances.
...
Added hotkey for cycling through net & netclass color modes.
Added hotkey for cycling through ratsnest layer visibilities.
Added code to display hotkey (if set) on the above and on high-contrast
cycle.
Fixes https://gitlab.com/kicad/code/kicad/issues/9312
2021-10-04 13:44:43 +01:00
930c4e5582
Cleanup.
...
Formatting.
Naming conventions.
Use of auto.
Use of STL cover types.
2021-10-03 19:42:29 +01:00
11c91c7179
Improve obscuring dialog algorithm to handle multiple dialogs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8970
2021-10-03 13:27:46 +01:00
5c402a64ab
Use mathematical rotation direction in Move Exactly dialog.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1897
2021-10-03 00:11:01 +01:00
574bef2237
Normalize drawing sheet path to env vars & prj, not just prj.
...
Also cleans up the dialog a bit.
Also changes the workings of NormalizePath to return the input if
it couldn't be shortened which saves open coding that behaviour in
all its callers.
Fixes https://gitlab.com/kicad/code/kicad/issues/9036
2021-10-02 23:39:45 +01:00
e2baacec21
Add cross-probing between PCB (markers) and DRC marker list.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7246
2021-10-02 23:39:45 +01:00
da79a3dd69
Option graphics limited to 45deg in creation: separate options for brd and fp editors.
...
Add these options in PANEL_EDIT_OPTIONS.
This option was previously living only in some context menus, not really visible.
2021-10-02 16:43:31 +02:00
10dd70881c
New paramaterized interface doesn't like quoted parameters.
...
(At least on MSW, anyway.)
2021-10-02 14:08:36 +01:00
ef74421922
Move centering of lib-tree item to idle event.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9294
2021-10-01 22:46:14 +01:00
5f5ee7335d
Formatting.
2021-10-01 21:49:14 +01:00
f606679164
Proper numeric sorting for intersheet refs.
...
Also expunges the horrifically named std::remove and std::remove_if
(neither of which remove anything).
2021-10-01 18:29:21 +01:00
dd1d36d40a
Fix segfault when check for editing points
...
The point editor is not always available when checking for points. We
need to handle the missing tool without crashing
2021-09-30 17:25:33 -07:00
a738257c43
Remove a tool tip not related to the parent widget.
2021-09-30 20:17:45 +02:00
e7ae3a181f
Handle casing for FocusOnItem
...
Some items are complex (footprints) and some don't have logical polygons
(PCB_MARKER), so we can't transform everything. So, handle the items we
can transform normally and use bbox or boundinghull for everything else
2021-09-29 16:19:49 -07:00
12b726ba2f
Prevent the point editor from fighting with other tools.
...
1) Don't start a long-click timer when the point editor is active.
2) Don't auto-start a wire when the point editor is active.
Fixes https://gitlab.com/kicad/code/kicad/issues/9270
2021-09-29 19:16:06 +01:00
ee2789943f
Supply grid with a GRID_TRICKS.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9273
2021-09-29 18:44:19 +01:00
0438a45176
Don't allow reentrancy into PlaceFootprint.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9269
2021-09-29 17:01:33 +01:00
3b6da14614
Don't allow offset for circular pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9266
2021-09-29 15:27:34 +01:00
07e01e6297
Allow converting graphic arc to track arc
2021-09-28 21:00:15 -04:00
2e120528c8
Length Tuner: Allow single meander when it fits on its own
2021-09-28 18:50:31 +01:00
71156368c9
Length Tuner: Allow controlling the side of the meander using the cursor
...
Also fixes an issue that did not allow single meanders to be placed
2021-09-28 18:50:31 +01:00
f73042fe24
Some minor performance enhancements.
2021-09-28 14:28:35 +01:00
fac48ddafb
Don't include stale nets in net counts.
...
Fixes bug reported by Franck.
2021-09-28 14:28:12 +01:00
d90dc77e00
Selection: Don't drop small moves
...
If we do a real drag, the timer will be cancelled. If we don't, then
the user is still holding the mouse button down and would probably like
to see the menu. Otherwise it appears the action is dropped.
2021-09-27 16:44:32 +00:00
726f9ebe3d
Pcbnew: Router tool should not block drag selection when idle
...
The other drawing tools allow drag selection while idle. Also, it makes
it more obvious to the user when accidentally drag selecting while
routing than just doing nothing on a drag with the routing tool selected
and idle.
2021-09-27 16:05:13 +00:00
544fa939f8
Lock/unlock group members when locking/unlocking group.
...
Also moves the stateful selection filter to after the hierarchy filter
since the hierarchy filter might swap a pad selection for a footprint
selection.
Fixes https://gitlab.com/kicad/code/kicad/issues/9255
Fixes https://gitlab.com/kicad/code/kicad/issues/7542
2021-09-27 11:29:52 +01:00
dfe4997664
Fix nullptr crash.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9250
2021-09-27 10:27:25 +01:00
5f3c67bd2b
Fill in some missing GetMsgPanelItems and make some others consistent.
...
Also expunges a std::vector<MSG_PANEL_ITEM> cover type.
2021-09-27 00:23:40 +01:00
e2368b733c
Allow selection of NPTH pads with zero copper size
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9249
2021-09-26 18:17:50 -04:00
422def1261
Move cross-probe scrolling to FocusOnLocation.
...
It handles not moving the display too much and using the exposed
center if there is a dialog over the window.
Fixes https://gitlab.com/kicad/code/kicad/issues/8985
2021-09-26 20:06:50 +01:00
a3dcdd4887
Allow highlight-net to work on zone copper.
...
We were already checking zones separately (after tracks and pads); we
just weren't setting the flag that causes the COLLECTOR to also test
zone fills.
Fixes https://gitlab.com/kicad/code/kicad/issues/5924
2021-09-26 19:26:22 +01:00
5853f0890e
Gerber job file: fix a bug that prevent writing dielectric constants for impedance controlled boards.
2021-09-26 16:11:15 +02:00
b799d563e5
Slight improvement to track & via clearance option text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8838
Fixes https://gitlab.com/kicad/code/kicad/issues/8839
2021-09-26 11:02:57 +01:00
77f47b6e47
Avoid assertion in some cases.
2021-09-26 10:54:50 +02:00
9f64850325
Drawing stackup table: fix a few issues and missing items.
...
Fixes #9243
https://gitlab.com/kicad/code/kicad/issues/9243
Fixes #9244
https://gitlab.com/kicad/code/kicad/issues/9244
2021-09-26 10:31:41 +02:00
6b25099df7
Read/write lock status for fp text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9325
2021-09-25 20:37:56 +01:00
3e7310a219
Move FP type check to FP DRC
...
Checks for validity are better centrally located where they don't
interrupt user actions
2021-09-25 08:56:27 -07:00
46949abe4a
Don't scroll to highlight an object already visible.
2021-09-25 15:31:52 +01:00
c3b6939ea7
Allow quiet creation (scripting)
2021-09-24 13:49:45 -07:00
bb95ca2966
Make MW footprints proper attrib
2021-09-24 13:48:01 -07:00
64be61b4d6
Allow user to set footprint type up front
...
The default is usually wrong and presenting the basic footprint
information when creating an empty footprint allows the user to
establish their preference before mistakes occur.
Fixes https://gitlab.com/kicad/code/kicad/issues/9215
2021-09-24 13:48:01 -07:00
a6fc885402
Component->Footprint label
2021-09-24 13:48:01 -07:00
963a8ee42d
Warn users when creating footprints about mismatch
...
Checks to see if the footprint attribute matches the type of pads
contained in the footprint. Can prevent issues during fabrication if
users forget to adjust them during creation.
Fixes https://gitlab.com/kicad/code/kicad/issues/9215
2021-09-24 13:48:01 -07:00
1b0c274e22
Python: Copy board iterables to prevent segfaults
...
Python code like:
for track in board.GetTracks():
board.Remove(track)
Would delete tracks in the the underlying m_tracks while iterating over
it.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5192
2021-09-24 19:40:46 +00:00
bf145dd633
Confine allow-locked-pad-selection-even-when-filtered to single-select.
...
Also make sure text in a locked footprint is not selected if the locked
items filter is unset.
Fixes https://gitlab.com/kicad/code/kicad/issues/9227
2021-09-24 18:58:22 +01:00
c38de1dcaf
Pull back some 7.0 fixes to Custom Rules code completion.
2021-09-23 13:08:31 +01:00
a2ad204f4b
Fix off-by-one in AssembleTuningPath
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9003
2021-09-22 20:25:22 -04:00
5975524826
Fixup PCB_ONE_LAYER_SELECTOR
...
It is useful to be able to tell which layer you are selecting. The
checkboxes, on the other hand, provide no information when dealing with
a single layer selection
2021-09-22 15:57:27 -07:00
140e4cbe28
Avoid assertion on 2-layer board
...
New boards may have INVALID_LAYER inbetween F_Cu and B_Cu in the
stackup. Skip these and any layer values beyond what we store currently
2021-09-22 12:37:17 -07:00
84864351c7
Fix units naming in stackup
...
We were not handling the new mils/inches division in stackup table
Fixes https://gitlab.com/kicad/code/kicad/issues/9210
2021-09-22 12:30:02 -07:00
16ec6fbec4
Plugins: Fix QR code generator shape exception
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9079
2021-09-22 11:15:26 -04:00
be799b49a8
Fix equality in dp matching
...
A single count is found when dp ends with matching char. .Right(0) will
return an empty wxString() which is still valid
Fixes https://gitlab.com/kicad/code/kicad/issues/9206
2021-09-21 19:47:15 -07:00
cf53b053a1
Improve handling of dragging around locked segments
...
Locked segments now are not modified if they weren't the start item.
If a locked segment is the start item, it is automatically unlocked.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9145
2021-09-21 22:38:53 -04:00
2ec1c215cd
Drop selection after hiding items.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8605
2021-09-21 17:02:34 +01:00
65c9170b46
Pcbnew: Clear tool and selection before updating PCB from schematic
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9196
2021-09-21 00:06:56 +00:00
22a29a42cf
Generalize net DP matching
...
The requirement of 1-2 numbers following P/N or +/- was arbitrary and
not needed. We also add the _ to allowable suffixes to permit DP
matching of auto-renamed nets
2021-09-20 15:30:47 -07:00
32a5653464
Remove yet more single-pad-net stuff.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9179
2021-09-20 22:04:02 +01:00
04aff93248
Eagle doesn't use netclass clearance so make them the board clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2442
2021-09-20 21:31:19 +01:00
dc1fd3d9ba
PNS test app: Add logging information for curved track routing
2021-09-20 20:35:24 +01:00
f66654247a
Read netclasses when importing Eagle projects.
...
Also creates a DRU file with the various netclass-to-netclass
clearance rules from the Eagle clearance matrix.
Fixes https://gitlab.com/kicad/code/kicad/issues/1774
2021-09-20 12:38:56 +01:00
8848f7158d
Fix a Coverity warning (non tested pointers, really a bug)
2021-09-20 09:14:10 +02:00
40a0f25a3e
Formatting.
2021-09-19 19:30:09 +01:00
6ea7e59991
Fix "done" message being in wrong place for drill files.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9172
2021-09-19 19:26:10 +01:00
3651d7c5e7
Remove vestiges of old zoom-auto architecture.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9055
2021-09-19 18:32:15 +01:00
6e7ce09572
Use more descriptive terminology for preferred text editor.
...
Also improves execution to allow the preferred editor to include
parameters, such as "/usr/bin/open -e".
Fixes https://gitlab.com/kicad/code/kicad/issues/9131
2021-09-19 15:17:26 +01:00
403826b97c
Respect the model show setting for vrml and idf export
...
Fix #9166
2021-09-19 08:16:18 -04:00
9f03a259f9
Remove no-longer-needed options from Update PCB and Import netlist.
...
The delete-single-pad-nets one is particularly problematic as it
makes some of the cross-probing features not work.
Fixes https://gitlab.com/kicad/code/kicad/issues/9179
2021-09-18 18:32:19 +01:00
b931883876
PANEL_FP_PROPERTIES_3D_MODEL: fix an issue when trying to edit a filename (MSW specific).
...
On Windows, FILENAME_RESOLVER::ValidateFileName() always returned a illegal filename test,
because the separators ('/' and '\') are in list of illegal chars in filenames on MSW.
2021-09-18 18:17:54 +02:00
4779850c10
Add done messages to various plotters.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9172
2021-09-18 10:39:57 +01:00
847c9e32c8
Don't allow the draw via tool to activate in the footprint editor
...
Fix #9186
2021-09-17 23:01:16 -04:00
34c2bd58d1
Disable ungroup where there are no groups in the selection.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9182
2021-09-17 22:21:33 +01:00
7b07b1650c
Don't draw titlebar for untitled groups.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9181
2021-09-17 22:01:17 +01:00
5c07441e24
Remove Setup Dialog assignment of netclasses to buses.
...
Also removes the message bar display of assigned netclass for
buses and bus-to-bus entries.
Also fixes a bug where assigning a netclass via the canvas only
looked at the first level of bus members (and not any nested
members).
Also fixes a bug where the bus name validator tried to validate
a vector bus first -- which doesn't work as a vector bus may be
nested in a group bus.
Also fixes a bug where we were failing to check for illegal
chars in bus definitions which otherwise passed the bus parsers.
See additional comments in the bug report.
Fixes https://gitlab.com/kicad/code/kicad/issues/9160
2021-09-17 22:01:17 +01:00
86ffb9a4bb
Bring a little more consistency to the Text & Graphics Defaults panel.
2021-09-17 22:01:17 +01:00
d90094de39
Fix progress dialog main frame focus issue on Linux.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8718
2021-09-16 15:53:18 -04:00
2479e1d7b1
Improve common settings property grouping.
...
Also moves apply-icon-scaling-to-fonts to its own checkbox. (We used
to try to infer when to do it, but that turns out to be a rathole.)
2021-09-16 18:31:44 +01:00
fdd9df6dff
Linear brightening doesn't work well for colours near white.
2021-09-16 14:17:52 +01:00
e2ce2e6ca9
Correct slight misalignment in Library Link fields.
2021-09-15 21:17:18 +01:00
b84d1456d5
KIFACE_I -> KIFACE_BASE.
2021-09-14 23:45:14 +01:00
Jeff Young
david-beinder
Wayne Stambaugh
Jon Evans
Roberto Fernandez Bautista
Seth Hillbrand
Mark Hämmerling
jean-pierre charras
Marek Roszko
Asuki Kono
Johannes Pfister
Peter Montgomery
Electro707
Tomasz Wlostowski
Floris Lambrechts
qu1ck
Ian McInerney
Mikolaj Wielgus
Mike Williams