7f1a560288
stm32/usbuart: Clear USART_ICR if provided.
...
Otherwise endless interrupts happened.
2021-05-20 12:06:56 +02:00
90534b3cf6
stm32: portability enhancements
...
Needed for e.g. stlinkv3
2021-05-20 12:06:56 +02:00
87acd99fe4
cortexm: For Cortex-M0+ devices, probe also for lpc11 to detect LPC80 #884
2021-05-18 12:24:00 +02:00
cb4cff2c71
hosted/ftdi: Compare only for length of the string given in the header
...
Devices may have added version like "Tigard V1.1" vs "Tigard"
2021-05-18 12:24:00 +02:00
c3fd198f0d
bmp_libusb: Reject non-BMP devices with VID 1d50.
2021-05-18 12:24:00 +02:00
36ad6efc6f
cmsis_dap.h: Fix wrong leftover argument.
2021-05-16 17:17:33 +02:00
f0dd8c9517
cl_utils: List -l option in the help.
2021-05-16 17:17:33 +02:00
517d5b5b31
rp: Show spinner only when called from monitor command.
2021-05-16 11:26:14 +02:00
0ab10fee0b
rp: Increase timeout for flash_range_program
...
If the RP2040 is using the ring oscilator (ROSC) rather than the crystal
oscilator (XOSC) then flashing program will take much longer. As the XOSC is not
enabled at boot we should not assume it will be enabled before the debugger is
connected (or indeed at all), thus should use the longer timeout during load
commands.
2021-05-16 11:26:14 +02:00
ff30259354
rp: Add more debug logging during flash
2021-05-16 11:26:14 +02:00
e453740aca
rp: Increase spinner timeout to 500ms
...
Increasing spinner timeout to 500 means `tc_printf` is not called during
the `_flash_range_erase`. This is important as `_flash_range_erase` is
used when loading. This fixes the issue:
https://github.com/blacksphere/blackmagic/issues/875
Also adding spinner timeout counter to reduce bus traffic.
2021-05-16 11:26:14 +02:00
67c9003522
rp: Flush cache after erase and write
...
The RP2040 datasheet suggests that _flash_flush_cache and _flash_enter_cmd_xip
should be called after erasing and writing to flash.
2021-05-16 11:26:14 +02:00
f880734050
Fix compiling for native probe
2021-05-16 11:26:14 +02:00
e4421799ba
More header cleanup
2021-05-15 12:54:51 +02:00
8e438b9e5f
Add missing headers and remove double typedef.
2021-05-14 19:58:16 +02:00
cfbe9f1c94
pc/gdb_if.c: More verbosity for Error messages #873
...
Thanks to "pshri" for dissecting and adding messages, as problems with
Hpyer-V and port permissions happened on Win10
2021-05-09 11:49:32 +02:00
f121350fc9
hosted/cmsis_dap: Verify that a v2 interface has endpoints.
2021-04-27 11:39:43 +02:00
494524dd85
hosted/cmsis_dap: Add v2 support.
2021-04-27 10:26:06 +02:00
4f52a7b235
hosted/cmsis_dap: Add discovery by interface string and prepare for v2 support.
2021-04-26 21:56:24 +02:00
c4874fdf44
hosted/dap: Add parentheses around bitwise operator.
2021-04-26 21:54:38 +02:00
f9414d5826
cmsis-dap: Handle ADI DP22 devices on probes not multidrop capable.
2021-04-26 18:18:18 +02:00
923edc7f7e
cmsis-dap: Fix wrong handling when reading data not word-aligned
2021-04-26 15:08:09 +02:00
877a6e694c
Revert "cmsis_dap: Always write full reportsize + 1 buffers"
...
This reverts commit 61e237ec87
2021-04-25 22:53:40 +02:00
1f67bab475
nxpke04: Move unsafe_enables to target bool union.
2021-04-25 16:03:23 +02:00
f87dff8d83
kinetis: Remove static variables, add word union to target_s.
...
Add a word union to target structure to hold a single word variable.
2021-04-25 16:03:23 +02:00
ac7c1057cc
efm32/samd/samx5x: Remove static allocates strings. Allocate in priv_storage.
...
Static allocated variables in the different targets eat up common RAM and
will collide in chains with multiple similar targets.
2021-04-25 16:03:23 +02:00
cddf02f174
samx5: Verbose error reports on protected devices.
2021-04-25 16:03:23 +02:00
8c8aa980cf
adiv5: Detect unprotected SAMD5x only once
2021-04-25 16:02:20 +02:00
f98b7274b4
hosted/stlinkv3: Detect STlinkV3 in bootloader mode.
2021-04-25 16:02:20 +02:00
a83700d1cf
stm32/usbuart: DMA stream handling is not STM32F4 specific
2021-04-25 16:02:20 +02:00
1330288271
firmware: Unify serial number handling
...
Use one file in dfu and server
For STM32, provide 3 ways to handle
- BMP way (8 bytes)
- DFU way (12 Bytes)
- Full unique id (24 Bytes), as with STLINK(V3) Bootloader
2021-04-25 16:02:20 +02:00
1b26ff560d
rp.c: Add reset_usb_boot as monitor command
2021-04-24 14:48:58 +02:00
52bffa70cf
rp: Handle flash.
...
- Beware, after reset, only a valid flash payload get mapped to XIP!
Only 0 is read from flash when flash image is not valid
2021-04-21 21:55:03 +02:00
2b0e255c40
cortexm: timeout and debug for run_stub()
2021-04-21 21:50:38 +02:00
61efe26348
swdp_scan: Break infinite loop after Dormant->SWD transition.
2021-04-21 21:50:38 +02:00
fa5e69e3be
RP 2040: Special handling for rescue DP
...
As the rescue DP provided no AP, trigger the reset with attach().
However attach will indicate failure also reset/halt has succeeded.
2021-04-21 21:50:38 +02:00
ea92c8b8c8
cmsis-dap: Allow to use adiv5_swdp_scan.
2021-04-21 21:50:38 +02:00
23f942ac8c
Raspberry RP2040: Recognize. No flash handling yet.
2021-04-21 21:50:35 +02:00
04d1c9805b
swd: Remove swd_proc and swdptap.h.
2021-04-21 21:50:04 +02:00
b6fbf86743
Extend ADIv5_DP_t for low level routines needed for multi-drop.
...
Will replace swd_proc
2021-04-21 21:50:04 +02:00
61e237ec87
cmsis_dap: Always write full reportsize + 1 buffers
...
Expect short reads and other errors else
2021-04-21 21:50:04 +02:00
d6ade4d94e
cmsis-dap: Use SWD_SEQUENCE if available.
2021-04-21 21:50:04 +02:00
5abb288c7a
hosted: Provide the DP functions in swd_proc.
2021-04-21 21:50:04 +02:00
fa561c8d66
adiv5_swdp: Starting point to handle multi-drop
...
- RP2040 show both DPs
- Multidrop test with STM32L552 and STM32H745 allows selection
with "-m 0x4500041" (H7), "-m 1" (L552) or "-m 0x01002927" (RP2040)
2021-04-21 21:50:04 +02:00
be3bfc48a8
cortexm: M33 has up to 8 hardware breakpoints
2021-04-21 21:22:59 +02:00
b1ac4187b9
Fix some formatting strings for 32-bit compile
2021-04-21 21:22:59 +02:00
637d76b585
cl_utils.c: Try jtag scan if swd scan did not give results.
2021-04-21 21:22:59 +02:00
5288eef617
cl_utils: With no size given, read the size of the lowest block.
2021-04-20 18:48:27 +02:00
beaccf2714
target: stm32l4: add support for STM32WLxx
...
This adds support for the STM32WL series in stm32l4.c. These parts have
the same flash registers layout as the L4 series, but a different base.
Since there are already two sets of registers in this target file, this
adds support for register maps that can be customized for each device
ID.
2021-04-20 18:42:36 +02:00
21b80949ff
Compile with -Os as default. Change like "make OPT_FLAGS=..."
...
SWD/JTAG Bitbang is compiled with -O3 for good bitbang speed.
2021-04-20 18:20:41 +02:00
f55ad67b1b
adiv5: catch timeout on adiv5_ap_read_id and abort
...
This adds a TRY_CATCH around the adiv5_ap_read_id() in
adiv5_component_probe() and resets the DP when that happens.
It seems like the STM32WLE5 comes with the AP of the inactive core
enabled in a way that does not make it detectable, and the current code
times out and leaves the whole device hanging.
Catching the timeout and calling adiv5_dp_abort() seems to restore the
device to a useable state.
Tested on Seed LoRa-E5 (STM32E5JC).
2021-04-19 16:57:13 +02:00
806787529f
Use DMA for USBUSART TX/RX
2021-04-17 17:57:08 +02:00
cf5b4afb38
bmp_serial/linux: Honor opt_list_only (-l).
2021-04-17 16:19:57 +02:00
d6b24c00c8
Fixed STM32G43x/G44x option bytes support
...
Previously took L4 values so FLASH_SEC1R was not applied
2021-04-17 14:44:30 +02:00
99f9557cc0
Support for STM32G49x/G4Ax (category 4)
2021-04-17 14:44:30 +02:00
c85c946ce3
PRIx32 fix
2021-04-17 14:44:30 +02:00
9ec7d05d8d
Put null terminating characters when scanning for BMP probes on linux
...
This patch puts null terminating characters for the 'type',
'version', and 'serial' strings extracted from blackmagic probe
id strings on linux systems.
2021-04-17 14:41:28 +02:00
299da8627c
libftdi: Remove unneeded explicit path.
2021-04-17 13:35:21 +02:00
a6a8606edb
STM32L55: Detect, memory map, read and flash write. Options handling missing.
...
Only non-secure states considered!
2021-04-04 17:26:31 +02:00
739941dc5f
Verify right after programming
2021-03-31 13:06:52 +02:00
2982888b66
BMP_MODE_FLASH_WRITE_VERIFY combined operation
2021-03-31 12:07:53 +02:00
f85c54be97
Prepared -w option
2021-03-31 12:07:53 +02:00
6d6cfd6c98
Comprehensive STM32G03/4/5/6/7/8/B/C driver
2021-03-29 21:42:40 +02:00
58f153e12b
cortexm: Always halt and release reset before romtable scan
...
Only release from halt once after romtable scan
Should fix #836 .
2021-03-26 17:43:11 +01:00
a025c9a7bd
Revert "stm32f1: On ST parts there is no need to read IDCODE again."
...
Romtable partno is not unique for devices, e.g. in STM32F0
This reverts commit f89b07d892
2021-03-26 17:35:00 +01:00
f89b07d892
stm32f1: On ST parts there is no need to read IDCODE again.
...
IDCODE is already known from the Romtable
Probably this has the same effect as #836
2021-03-12 20:45:34 +01:00
e6a9a1a366
cmsis-dap: Get the firmware version.
2021-03-06 13:30:09 +01:00
7859a2aabd
adiv5_swd: Factor out creation of packet request.
2021-03-06 13:30:09 +01:00
cfb784d428
adiv5: Fix comments and debug output
2021-03-05 16:49:19 +01:00
3aa6f16964
serial_unix: Split timeout in seconds and microseconds
...
Macos exposed errors when tv_usec was > 1000000.
2021-03-05 16:49:19 +01:00
43770736f1
cl_utils: Rework Flash/Ram printout
2021-03-05 16:49:19 +01:00
560a046a22
Add support for NXP LPC802, LPC804, LPC832 and LPC834
2021-02-22 19:37:46 +01:00
0df44e205b
ADIv5: Abort Romtable scan also if CIDR0 is invalid after halting #832
...
STM32WLE5 has the same dual core chip as STM32WL5. For the second
core, the additional AP can be see, but access to e.g. CIDR0 for that
Romtable fails.
Aborting the scan too if again the second read of CIDR0 fails makes
sense anyways!
2021-02-19 18:48:02 +01:00
d70fa8c7f6
hosted: Remove restrictions when gathering information on the debugger
...
That way, we find RPI Pico pico-debug.
2021-02-15 17:47:29 +01:00
c776e7a9a6
swd_scan: Add '-m' as targetid argument to swd_scan to prepare multi-drop.
...
In a real multi-drop setup, the device to use must be specified.
2021-02-15 17:47:29 +01:00
8e2f6937d5
hosted: Run target specific monitor commands with -M "command" .
...
Lists available commands: "blackmagic -M help"
Quote multi argument monitor commands, e.g. STM32F1: blackmagic -M "option help"
2021-02-15 17:47:29 +01:00
165560edd8
cl_utils: target selection '-n' argument needs optarg.
...
foreach now returns the number of targets.
2021-02-15 17:47:29 +01:00
4eb336277c
native: Remove high current draw ( #814 )
...
Special iRST_SENSE handling does not apply at least for BMP 2.1c.
On V2.1c, iRST_SENSE was set as output high and xRST high shorted
iRST_SENSE to ground via Q2
FIXME: Check for older versions!
2021-02-15 15:00:19 +01:00
3b8502c2e5
add space in USB product string (be consistent with ../stm32/dfucore.c)
...
This changes the USB identification from
"Black Magic Probe(STLINK/V2) v..." to
"Black Magic Probe (STLINK/V2) v..."
Signed-off-by: Martin <Ho-Ro@users.noreply.github.com>
2021-01-29 14:47:28 +01:00
d4dc3b2717
The USB CDC is no modem and does not use the AT protocol
...
Signed-off-by: Martin <Ho-Ro@users.noreply.github.com>
2021-01-29 14:47:28 +01:00
42f590ce0b
fixing some memory map errors for stm32h7, PR #821
2020-12-23 20:10:39 +01:00
09c000eca8
hosted: Really handle setting tpwr on remote on the command line #817
...
Expect the command to fail, due to old firmware or remote not implementing
the power switch.
2020-12-19 16:36:09 +01:00
2b06f045c4
target: kinetis: add S32K148
...
This adds support for the NXP S32K148. This is an automotive-grade part
that is derived from the Kinetis line, so it has a very similar
interface to other parts in the family.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-12-16 12:49:23 +01:00
5f76169b95
hosted: remove ftdi include when built with BMP_ONLY #811
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-12-16 11:30:42 +01:00
98c92a6d18
hosted: Really fix the case of no serial number ( #807 )
2020-12-13 14:12:05 +01:00
aa0d8f4b5d
Merge pull request #783 from UweBonnes/frequency
...
Frequency
2020-12-12 19:50:53 +01:00
020600aa56
target/lpc546xx: fix lpc546xx flash support ( #801 )
...
**Summary**
Modifications to fix flash support on the lpc546xx:
- fix IAP entrypoint to be `0x03000204`, not the value at that address
- add a reset and attach sequence before erasing flash sectors. there's
little documentation around this, but experimentally, erasing sector 0
fails when the ROM bootloader is mapped to it (on reset). stepping the
chip once and attaching is enough to snap the chip out of it, permitting
flash erase on sector 0.
- add a few test commands to the lpc546xx table (read_uid, erase/write
sector, etc).
- write the magic CRC value when writing to sector 0
(`lpc_flash_write_magic_vect`).
- move the lpc546xx probe to before the lpc43xx probe, to prevent
getting the lpc546xx into Lockup when reading an illegal memory location
during lpc43xx probing
Fixes #786 .
I don't 100% understand the reset/load sequence of this part, but these
changes are sufficient to program and debug the part now.
I didn't do a detailed analysis of what pyocd (via st-link hardware
adapter) and segger jlink do to handle the same, but both of those
worked without modification, so there's some difference in the
sequence they're using.
**Testing**
Verified I can now successfully erase and write an executable in sector
0 (and other sectors).
Verified the new commands work correctly.
2020-12-12 19:48:05 +01:00
6dbb5ff7ee
Frequency: Implementing for jlink.
...
SWD frequency is fixed for jlink according to the docs from 2010.
2020-12-12 18:33:09 +01:00
fdc654cfb3
stlink: Implementation of frequency setting.
2020-12-12 18:33:09 +01:00
de26ba6f73
hosted: Add is_jtag to the info structure
...
Needed for different frequency setting procedures on some platforms.
2020-12-12 18:33:09 +01:00
28a966a3e6
frequency: Implement for ftdi.
...
For all 2232H types, use undivided 60 Mhz.
FIXME: Check FT2322C/D for unsymetric clock at 6 MHz!
2020-12-12 18:33:09 +01:00
13e8a262e4
SWJ Frequency: Implement for cmsis-dap
2020-12-12 18:33:09 +01:00
1ca9f234f7
Infrastructure for setting maximum SWJ frequency.
...
Implement for BMP/firmware on STM32.
2020-12-12 18:33:09 +01:00
7365a44989
hosted: Implement SWJ test mode (-T).
...
Continious read/write-back some core register as NOP operation to allow scope
measurement of SWJ timing.
2020-12-12 18:33:09 +01:00
f796b774bd
hosted: Fix info.serial if USB device has no serial number #807
2020-12-12 18:32:15 +01:00
518529a772
Support GD32E23x
2020-12-12 18:29:30 +01:00
14498decd9
HOSTED_BMP_ONLY/linux: Fix case when no serial device is connected #806
2020-12-12 15:06:26 +01:00
93d4c65948
Fix building with newer GNU make( #804 )
...
More recent versions of GNU make remove the `-` prefix from
`$(MAKEFLAGS)`, which breaks the build:
```bash
# output truncated to interesting parts
> make -C src --trace all_platforms
set -e ;\
mkdir -p artifacts/v1.7.1-91-g98b4ec5 ;\
echo "<html><body><ul>" > artifacts/index.html ;\
for i in platforms/*/Makefile.inc ; do \
...\
make w --trace --no-print-directory clean ;\
make w --trace --no-print-directory;\
...\
done ;\
echo "</ul></body></html>" >> artifacts/index.html ;\
cp artifacts/*.bin artifacts/v1.7.1-91-g98b4ec5
Building for hardware platform: f4discovery
make[1]: *** No rule to make target 'w'. Stop.
```
Per the
[documentation](https://www.gnu.org/software/make/manual/html_node/Options_002fRecursion.html ),
there's no need to manually apply insert `$(MAKEFLAGS)`, it should be
automatically included when using `$(MAKE)` when recursing.
I tested on my machine (make 4.2.1) and a docker image based on
ubuntu:trusty (make 3.81), both behaved the same (directories were not
printed when recursing by default);
2020-12-12 14:39:52 +01:00
b5172cf6df
Implement the 'find_debuggers()' function for hosted BMP on windows.
2020-12-11 18:36:48 +01:00
01f8628aed
Bugfix in detecting BMP probes by usb serial number.
2020-12-11 18:36:48 +01:00
170fe0c368
Remove spurious comment.
2020-12-11 18:36:16 +01:00
4c5ce0b16a
Hosted: Handle devices w/o serial number, e.g. GigaDevices GD-Link ARM/CMSIS-DAP
2020-12-11 18:36:16 +01:00
0f1fe9e438
hosted/linux: Find BMP devices without libusb.
2020-12-11 18:36:09 +01:00
bd5f4c6ed5
hosted: Consolidate ident output.
2020-12-11 17:55:31 +01:00
0870b778c0
hosted: Allow to build without libusb, libftdi and hidapi with HOSTED_BMP_ONLY=1
2020-12-11 17:50:16 +01:00
32db38ecf2
hosted/libusb: Move platform.c libusb related functions to own file.
2020-12-11 17:35:43 +01:00
41788f923b
ftdi/stlink/jlink: Provide dummy functions in the HOSTED_BMP_ONLY case
...
Do not allow multiple inclusion by not declaring the functions as static to
help keep code clean.
2020-12-11 17:31:25 +01:00
98b4ec58bc
Update to recent libopencm3 to undo unwanted change.
2020-12-07 21:51:22 +01:00
633c6a2e81
Recognize "J-Trace Cortex-M PRO V2" in hosted mode
2020-12-07 11:52:33 +01:00
17dfec3572
dfu/cdcacm: Consolidate usage of ST vs BMP serial number.
2020-12-06 15:18:08 +01:00
5c7e0eedb0
command.c: Consolidate "mon version" output
2020-12-06 15:18:08 +01:00
07c3699225
version.h: Remove from platform.h files
...
- Consolidate ident string generation
- Recompile only needed files
2020-12-06 15:18:08 +01:00
dd6aadc54d
jtag: Add verbosity about devices found.
2020-12-06 15:18:08 +01:00
0a7bfd5923
dfu_f4: Fix sector_erase.
2020-12-06 15:18:08 +01:00
e318f884bf
Change the type of 'cortexm_wait_timeout' to unsigned.
...
It makes sense that the timeout value is unsigned, it also
resolves build errors on some platforms.
2020-12-04 11:44:50 +01:00
c9a419e44b
Correct loss of sync protocol error #787
2020-12-04 11:33:23 +01:00
e3fd12ebc6
gd32f1/f3 detection and ram/flash autoset
2020-12-03 11:16:47 +01:00
575c25e570
Add support for STM32F1 clone with new AP_DESIGNER id
2020-12-01 10:23:16 +01:00
48a79ff9da
adiv5: More checks for a sensible DPIDR.
2020-11-29 21:11:11 +01:00
752bc26536
adiv5: Fix memleak with duplicated base.
2020-11-29 21:11:11 +01:00
acec489647
adiv5_jtagdp: Always set idcode.
2020-11-29 21:11:11 +01:00
9e1b7fdac0
jlink/swd_low_access: Fix data direction during response read phase.
2020-11-29 15:48:50 +01:00
8903026c14
jlink/swd: swd frequency is fixed, not need to set.
2020-11-29 15:48:50 +01:00
f45c56af83
adiv5/swdp: Check early for valid DP idcode.
2020-11-29 15:48:50 +01:00
3b6432912d
jlink: Catch another error with no target connected.
2020-11-29 15:48:50 +01:00
7df314e265
Firmware/Jlink: Fix double free when debug power-up fails ( #780 )
2020-11-29 15:48:50 +01:00
e1329499de
platform_adiv5_swdp_scan: Do not double free with early errors.
...
adiv5_dp_init() clean up itself if errors happen
2020-11-29 15:48:50 +01:00
bf548e92c0
swd: After write low_access, always append 8 clk to move data through SW-DP.
...
Especially needed when leaving the debugger or during debug unit power-up.
ARM Debug Interface Architecture Specification ADIv5.0 to ADIv5.2
tells to clock the data through SW-DP to either :
- immediate start a new transaction
- continue to drive idle cycles
- or clock at least 8 idle cycles
Implement last option to favour correctness over slight speed decrease
Implement only for adapters where we assemble the seq_out_parity in our code,
as on firmware, ftdi and jlink. Hopefully the high level adapters do it right.
Reverts 2c33cde63fcde7726b87
2020-11-27 22:26:48 +01:00
139e5d7e22
f4discovery: Compile time option to compile with ST bootloader
...
Just to keep things active. Prepare for F72 bootloader.
2020-11-27 22:26:48 +01:00
636bcee355
stlink/swlink: Remove the DFU upgrade utility.
...
Hopefully no old bootloaders are around. If otherwise, revert to last
commit before this and update the DFU bootloader.
2020-11-27 22:26:48 +01:00
27ef4569ca
stm32/dfucore.c: Use libopencm3 provided defines and functions.
2020-11-27 22:26:48 +01:00
9d55128ab8
cl_utils: Get voltage only once.
2020-11-27 22:26:48 +01:00
e6823f39de
Hosted: Print version with "-h" and "-t" option.
2020-11-27 22:26:48 +01:00
3ee31473c6
cortexm.c: LPC15xx has designer 43b and Partno 4c3
...
Thanks to JojoS!
2020-11-27 22:26:48 +01:00
62d9f60f03
hosted/firmware: Waits for read response as long as cortexm_wait_timeout.
2020-11-27 22:26:48 +01:00
26a23dd1cb
stlinkv2: Try harder to open an AP.
...
Problem seen on STM32L0 with probably long sleep periods.
2020-11-27 22:26:48 +01:00
19e1fddba2
adiv5: Remove unnescessary read.
2020-11-27 22:26:48 +01:00
cda83d3084
Fix memleaks.
...
Happened e.g. when Stlink could not enter debug or when cortexm_prepare timed out.
2020-11-27 22:26:48 +01:00
9ac5adfcef
adiv5: Additional decoding.
2020-11-27 22:26:48 +01:00
d78d7838d3
stm32f1: Always read DBGMCU_IDCODE for t->idcode ( #770 )
...
At least STM32F042 has 0x440 as romtable partno vs 0x445 as DBGMCU_IDCODE.
Thanks to Andrey Melnikov(aam335) for pointing out!
2020-11-27 22:26:48 +01:00
653d486ee2
cortexm: Store CPUID in target structure.
2020-11-27 22:26:48 +01:00
824a1d8abc
hosted/find_debuggers: Do not check hubs. Print class of devices unable to open.
2020-11-27 22:26:48 +01:00
e68dd25813
cl_utils: Clarify -d option is BMP/firmware only and deprecate -d.
2020-11-27 22:26:48 +01:00
f71e18948a
GPIO for SWD: Slow down edges on more platforms.
2020-11-27 22:26:48 +01:00
80154c5c7a
adiv5_swdp: Fix more memory leak.
2020-11-27 22:26:48 +01:00
35bcb4f7c6
Switch on the lpc546xx target
...
Enable the lpc546xx target. Tested on the LPCXpresso54628 dev board,
able to flash and debug.
2020-11-24 21:32:39 +01:00
e9c02296f2
target: kinetis: add S32K118
...
This adds support for the NXP S32K118. This is an automotive-grade part
that is derived from the Kinetis line, so it has a very similar
interface to other parts in the family.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-11-14 13:06:23 +01:00
f18be6ef7a
Add support for Kinetis K12 and placeholders for other K-series MCUs
2020-11-07 12:44:05 +01:00
2c33cde63f
cortexm.c/cortexm_halt_resume: Add some clock cycles to always get CPU going ( #768 )
2020-11-01 21:53:23 +01:00
d75f3124b9
ftdi_bmp.c: Reapply fix from #715 : Check for libftdi 1.5
2020-11-01 12:09:27 +01:00
Uwe Bonnes
James Turton
Vegard Storheil Eriksen
Fabio Baltieri
Vestrel
fabalthazar
Stoyan Shopov
Thiadmer Riemersma
Martin
Alex Norman
Sean Cross
Noah Pendleton
Aaron Lindsay
Noah Pendleton
Emilio Lopes
mean
Jonathan Giles
jbuonagurio