Up until now we relied on implicit loading of middlewares and reducers, through
having imports in each feature's index.js.
This leads to many complex import cycles which result in (sometimes) hard to fix
bugs in addition to (often) breaking mobile because a web-only feature gets
imported on mobile too, thanks to the implicit loading.
This PR changes that to make the process explicit. Both middlewares and reducers
are imported in a single place, the app entrypoint. They have been divided into
3 categories: any, web and native, which represent each of the platforms
respectively.
Ideally no feature should have an index.js exporting actions, action types and
components, but that's a larger ordeal, so this is just the first step in
getting there. In order to both set example and avoid large cycles the app
feature has been refactored to not have an idex.js itself.
> playinline attr needs to be set to true to stop local video from playing in full screen mode in Safari on iOS.
> This applies to the local video thumbnails and the camera previews from the device selection menu and video preview button
* fix: Fixes using token with no user context.
* feat(moderated): Adds option to add moderated rooms and subdomains.
When a user joins such room or subdomain in order to be a moderator needs to provide a valid jwt token for that room.
* squash: Renames function.
* ref: Removes filtering jicofo setting owners.
This will be disabled on jicofo side and will greatly simplify logic.
Also check the checks to avoid jwt for main domain to access subdomains and the other way around.
* fix: Skips allowners logic for admins.
Use a dimensions detecting root component. The Dimensions module does not
measure the app's view size, but the Window, which may not be the same, for
example on iOS when PiP is used.
Also refactor the aspect ratio wrap component since it can be taken directly
from the store.
Last, remove the use of DimensionsDetector on LargeVideo and TileView since they
occupy the full-screen anyway.
Fixes PiP mode on iOS.
* The prejoin page always displays the 'join without audio' option.
* The join button will be disabled if there is no input.
* Fix some CSS for the case when the user is not anonymous.
* Add a checkbox for skipping the prejoin page on next use. (This is hidden for
now, until we also have a settings entry for it).
* Rework 'Join by Phone' buttons and add new overlay.
* Update the device status accordingly if there were errors while adding
devices.
* The input is filled with the display name if there was one previously used.
* Join the meeting on 'Enter' press.
* ref: disable ICE restart by default
The reason for that it's currently causing issues with signaling when
Octo is enabled. Also when we do an "ICE restart"(which is not a real
ICE restart), the client maintains the TCC sequence number counter, but
the bridge resets it. The bridge sends media packets with TCC sequence
numbers starting from 0.
The 'enableIceRestart' config option can be used to force it, but it's
not recommended.
Move all polyfills to a standalone feature, which gets imported before anything
else in the mobile entrypoint. This guarantees that any further import sees the
polyfilled environment.
In
1ffd75c0a6
we switched to using the localStorage wrapper provided by js-utils, which
checks for window.localStorage's availability very early. Our polyfill must be
applied earlier that any such import.
Here we are importing it in the entrypoint, which means no code ran before this,
literally.
* Add dialog to set the E2EE key
* Use the Redux action / middleware to update the key even when set through the
hash parameter
* Cleanup URL after processing the key so it's not recorded in browser history
* Accessibility: Make the native toolbox item communicate that it is a button.
* Accessibility: If an item is toggled, mark it as selected for accessibility
* Accessibility: Make the toolbox a toolbar for accessibility
* Accessibility: Mark the bottom sheet as a menu for accessibility
* Fix typo, AccessibilityRole, not AccessibleRole
* Statement fix
* Appease the linter
* Fix linting errors for real this time
* Expose toggle buttons better via ARIA
* Wire up the divs/li as role=button as per ARIA patterns
* Add flow annotations to appease the linter
* For role=button use aria-pressed not aria-checked
When the reccorder joins, they have a local participant, which is not rendered,
so don't count it towards the partcipant count used for computing the tile
sizes.
Logs the device list when is updated in the reducer and removes
"button enabled" logging which used to dump the device list, but
in a useless way(Object[Object]).
Makes an attempt to log currently selected device, but because of
multiple possible paths it's impossible to find one reliable spot to log
selected device. One has to rely on device list and the GUM call logged
to figure things out.
Regresssion from bd8a7edbd2.
When the toolbar buttons are overridden with URL parameters, our computed set of
buttons will be wrong. Thus, compute it every time and check for the
differences.
This effect doesn't modify the media stream, so its safe to start/stop effect and not apply it on the JitsiLocalTrack. This way we can make sure that this effect is not switched out when presenter effect is applied.
* fix(thumbnail): Optimize status bar moderator icon
Moved all moderator functionality to react to optimize the number of
status bar updates.
* fix(RemoteVideoMenuTriggerButton): Use nullish coalescing
Co-Authored-By: Saúl Ibarra Corretgé <saghul@jitsi.org>
* ref(StatusBar): rename to StatusIndicators
* fix(RemoteVideoMenu): isModerator value.
* fix(notification): mobile.
Co-authored-by: Saúl Ibarra Corretgé <s@saghul.net>
* Uses correct scopes for google API based on config.js values.
* Lower the number of parameters that we pass around.
* Fixes googleAPIState state checking.
Since the verical filmstrip doesn't set its width explicitly anymore,
calculating the available area for the large video based on the
filmstrip width retrieved from the HTML element was wrong
in the cases when the rendering and cleanup of the filmstrip hasn't
finish yet. For example when switching from tile view to stage view.
Protectt ourselves against interfaceConfig being undeclared. typeof
interfaceConfig will return "undefined", but that's different than having some
window.interfaceConfig = undefined, even though the valus is the same. The
former will give a ReferenceError.
* ref(web): removes video blur when ICE is disconnected.
Removes the blur effect from the large video and stops showing
the network connectivity issues message when ICE disconnects.
The feature has been considered too disruptive and there's a plan to
have it replaced with a more subtle indication.
* remove RECONNECTING key from main.json
Config.js will allow to specify both BOSH and Websocket URLs. In such
case the web app will prefer Websocket over BOSH. The reason is that it
appears to be more stable and a bit fast on web, while on mobile
websocket is dropped fast(killed by the OS) on network changes.
Fallback to the non-ConnectionService case for any error. Also, handle errors
when registering the phone account; Pixel C devices throw UnsupportedException.
This addresses a bug, in which submitting a password
through the iframe api no longer closes RoomLockPrompt,
by explicitly closing prompts for a lock or password.
Some Samsung devices will fail to fully engage ConnectionService if no SIM card
was ever installed on the device. We could check for it, but it would require
the CALL_PHONE permission, which is not something we want to do, so fallback to
not using ConnectionService.
Some devices seem to have a bug in their Android versions and startCall fails
with SecurityError because the CALL_PHONE permissions is not granted. This is
not a requirement for self-managed connection services as per the official
documentation though:
https://developer.android.com/guide/topics/connectivity/telecom/selfManaged
Alas, connection services takes over audio device management too, so let's
handle the error and disable CS if we get SecurityError.
- Adds the ability to share video as a "PiP" when screenshare is in progress.
- Add a method for creating a local presenter track.
- Make sure isLocalVideoTrackMuted returns the correct mute state when only screenshare is present.
- Make sure we get the updated window size of the window being shared before painting it on the canvas.
- Make sure we check if the shared window has been resized
Instead let the mobile OS take care of opening the URL
in the appropriate application. Without target _blank,
iOS 13.2.2 on Chrome will open about:blank and immediately
close the tab instead of opening the store.
* Adds an option to set email through iframe API init and to stats.
* Simplifies configuring email and displayName in stats.
Removes enableStatsID as not needed as when off we are sending as callstats id xmpp resource which is unique per call and id must be something that sticks between calls (callstatsUsername).
* Adds email and displayName in stats config for mobile.
* chore(deps): Updates lib-jitsi-meet to latest dd31f0a.
* Removes enableStatsID from config and whitelist.
It crashes on Android. Well, on the JSC version React Native uses on Android.
While we could use this fallback only on Android, we have decided to use it
on all mobile platforms for consistency.
- Remove network-activity "feature"
- It wasn't in use
- It relied on internal React Native components, bound to break anytime
- Show an infinite loading indicator
- Style it just like the LoadConfigOverlay
- Since it kinda represents the opposite, an "unload" then SDK is done
We are downloading code off the Internet and executing it on the user's device,
so run it sandboxed to avoid potential bad actors.
Since it's impossible to eval() safely in JS and React Native doesn't offer
something akin to Node's vm module, here we are rolling our own.
On Android it uses the Duktape JavaScript engine and on iOS the builtin
JavaScriptCore engine. The extra JS engine is *only* used for evaluating the
downloaded code and returning a JSON string which is then passed back to RN.
- use AbortController for setting the fetch timeout
- use async / await syntax for clarify
- set the default timeout to 5s (previously non-existent, aka 0)
- add ability to load but not evaluate a script
They never worked on mobile and pose an impediment for makinf config.js more
future proof. Specially if we want to move to a non-executable form of
configuration.
This adds an option to disable video autoplay that will be used mostly with maleus (our selenium-based load testing tool for testing the new bridge). Disabling video rendering lowers the resource utilisation of the selenium nodes.
Bring back the workaround introduced in afd2aea7
but removed in 21dcc41d. On conference join,
several other actions have already been fired
that try to set the large video participant
and select the participant on the bridge.
The problem is there is no conference during
these actions so the select participant
never fires. Then subsequent actions do not
fire select participant because the large
video participant has not changed.
We try to load the configuration with every room change, even when there is no
room. There is a bad (corner) case: when we have no config cached (first boot or
wiped app data). In such case the user is trapped in an infinite loop because we
require the config to show the welcome page, oh well.
Pretend we have a configuration by creating the most minimal one to at least get
to the welcome page.
Audio streams are automatically played by WebRTC and this won't change, probably
ever. There is no point in having checks and an Audio component which does
nothing.
In iOS 13 if the call is not unmuted when we report it to the system as started,
an action to unmute it is dispatched automagically. Thanks, Apple.
So, delay synchronizing the muted state until the conference is started (after
the join action). This creates a small window for de-synchronization, but it's
very short and it seems unavoidable.
This change is only applied to operating systems built by the fruit company in
Cupertino.
These provide the ability to integrate the SDK with some other application
loggers.
At the time this was written we use Timber on Android and CocoaLumberjack on iOS.
In addition to the integration capabilities, a LogBridge React Native module
provides log transports for JavaScript code, thus centralizing all logs on the
native loggers.
Will emit new 'network.info' action with the online/offline status and
extra details for native like the network type and
'isConnectionExpensive' flag.
It need not always exist, since it's created asynchronousluy on app
initiualization. Make sure we are ready for it.
I've seen backtraces because of this.
Any overrides set on interfaceConfig are not
applied on module load. As such, call to get
the value of the auto pin setting, providing
time for the bootstrapping to set overrides.
Otherwise iframe api users cannot override
the setting.
React Native doesn't define __filename nor __dirname so do it artisanally. In
addition, this helps with centralizing the configuration passed to loggers.
Mobile uses a different logic for deciding whether to show the filmstrip or not:
if there are more than 1 participants or not, and there is no way to manually
toggle it.
This commit refactors device selection (more heavily on iOS) to make it
consistent across platforms.
Due to its complexity I couldn't break out each step into separate commits,
apologies to the reviewer.
Changes made to device handling:
- speaker is always the default, regardless of the mode
- "Phone" shows as a selectable option, even in video call mode
- "Phone" is not displayed when wired headphones are present
- Shared device picker between iOS and Android
- Runtime device updates while the picker is open
It's an evolution of audio-only mode, where we also allow for receiving a remote
screen-share.
Diving deeper: this basically sets last N to 1 or 0 depending on the
availability of a screen-share.
This prevents inserting any user overridden APP_NAME
values into html. A new translation key is being used
to immediately stop non-english languages from using the
problematic string.
Also tweaked the copy to remove the "eer" and fix
some grammar.
This refactors all handling of audio-only and last N to 2 features in preparation
for "low bandwidth mode".
The main motivation to do this is that lastN is a "global" setting so it helps
to have all processing for it in a single place.
* ref(feedback): emit api feedback submitted on completion
Compared to firing the event on submission because
the submission ajax will not be completed at that
time..
* squash: update package.json
When a participant is pinned in the UI we then proceed to mark it as selected on
the JVB. This will make the participant part of the last N set and will receive
the highest (or configured highest) video quality.
Pinning a participant at the JVB level just makes sure it will be part of the
last N set.
Since only one participant can be pinned in the UI, there is no point in pinning
it at the JVB level, since selecting it already achieved the same result.
Moves getCurrentConferenceUrl method to base/connection to allow reuse.
The new location is not ideal, but looks the best based on the imports
required (trying to avoid circular dependencies).
* Moves talk while muted as a new feature.
* Adds sound notification for talk while muted.
* Reorder imports and changes the dispatch of the notification.
* Introduces sounds.js for talk while muted.
* Removes unused translations.
* Fixes using translated strings.
* Moves using latest i18next versions and stop using compatibility modes.
* Sorts i18next options.
* Fixes defaultNS used by i18next.
This is used when translating html tags with data-i18n keys as attributes, used by jQuery-Impromptu.
* ref(user-interaction): remove storing of listener
* ref(user-interaction): move browser requirement check to lib-jitsi-meet
* ref(user-interaction): no inner function for listener, use module scope
* Listens for suspend events from jitsi-power-monitor on postis channel.
* Removes duplicated type and actions.
* Moves suspendDetected state from overlay to power-monitor feature.
* fix(invite): decode the meeting name
* squash: try to make mobile join same encoded meeting name as web
* Decodes and generated texts for share and copy meeting info.
Decodes in all cases except when it contains a space, as it will generate wrong links when pasted/shared in external applications.
* Adds a notification when remote lock happens.
* Updates translations.
Removes unused strings and extracts room password to separate translation, to be able to change it when deployment uses only digits.
* Formats the conference pin when showing it.
* Removes member from translation in favour of participant.
* Updates formatting of the pin.
* Adds a notification when password is remotely removed.
Join notifications are already supressed for the local
participant, so hide the left notification. For now
the notification is not being shown on mobile to keep
the same existing behavior and because a copy change
will be needed, but will be added once batching is
implemented.
When native SDK users end a meeting the view gets disposed and detached from
React, and then the entire app gets destroyed and these errors get printed at
the error level, throwing some people off.
* Fixes inviting more than one participant.
* Shows a notification when participants are invited.
* Adds support for both .id and .user_id props for people query results.
This was hit on a corner case when ConnectionService will deny
the request to start the call. I am not sure, but it could have been
that the conference object has been disposed or closed or something
else, but the fact is that 'conference.room' was not defined and things
crashed. It is not safe to access conference's private field 'room'. It
is true JitsiConference doesn't follow the practice of marking this
field as private with the underscore '_', but it is not a public field.
* Updates kick showing who kicked us.
* Notify participants that someone was kicked.
* Shows notification to user who is remotely muted.
* Updates the notification type.
* Muted by notification for mobile.
* Moves code to react and adds the kick notifications to mobile.
* Updates lib-jitsi-meet.
* Updates start silent, turning on startWithAudioMuted and few UI tweaks.
Disabled mic unmute button and removes remote participants volume slider.
* Adds analytics for start silent.
* Removes extra semi colon.
* Updates lib-jitsi-meet and updates meeting info text.
Checking if the calendar support in the reducer is not only useless but wrong,
since we don't have access to the entire store (the calendar support is checked
in the base/config feature). If calendar support is not enabled the actions
being reduced won't be dispatched anyway, so no harm is done by removing the
check.
When the video unmute button disabled audio-only, also unmute video. This fixes
a weird case in which the user need to "unmute twice" if they were muted beofre
they enabled audio-only mode. That's ok if the audio-only button was used, but
not if the video-unmute button was used, since the expectation is to have video,
of course.
Re-structure the custom routing to split between
platforms instead of between intended route features.
This made it easier for me to understand where to
do the checks for unsupported browser after deep-linking
had been checked.
If a value is not set in localStorage then null is
returned. null should not be converted to an empty
string (via _.escape) because that will then be
stored in localStorage as the user set preference
and will keep overriding any other values set
in localStorage for the displayname.
- Use actions to notify the rest of the app that
a mic or camera error has occurred
- Use middleware to respond to those notifications
of errors by showing in-app notifications and
notifying the external api
When in a conference, try to enter PiP when pressing the back button. If this is
not possible (because it's unsupported, not enabled, etc.) fall back to the
previous behavior of simply hanging up.
This PR changes the logic for connecting / disconnecting conferences. Instead of
doing it in mount / unmount events from the Conference component, it moves the
logic to the appNavigatee action.
This fixes a regression introduced in 774c5ecd when trying to make sure the
conference terminated event is always sent.
By moving the logic to appNavigate we no longer depend on side-effects for
connecting / disconnecting, and the code should be more maintainable moving
forward.
An improvement to this is the concept of sessions, which, while not tackled
here, was taken into consideration.
For the external api to fire update events out of the iframe, it
must first be initialized within the jitsi app. Any invocations
by the app to send updates events before initialization will
cause the api to swallow the events. The chosen fix is to
initialize the api earlier so the first update of app's redux
store fires update events that the api will also fire out of
the iframe.
This change will affect current behavior in that right now
the update event of the initial set of the avatar url is
blocked, but the change will make that event fire out of the
iframe.
Currently devices set through the api are stored
as ids, and not user selected. This can cause
other existing user selected devices to take
precedence over the devices passed into the api.
By making the container 100% height and position relative, that
would cause it to overlap any static-positioned elements below it.
The 100% makes it so that any watermarks intended for the bottom
of the page show up on the bottom of the page. However, it's not
needed because watermark stylings already try to position the
watermarks at the bottom.
* Fix detecting preferred audio output.
Fixes detecting when a new output device is found and we have stored user preference of using that device.
* Does not store which is the currently open device on save.
Does not save the currently opened device when saving settings dialog, this will be done once we successfully replace the tracks to use the new devices.
* Saves opened audio device after successfully changing it.
If we do it earlier _updateAudioDeviceId is using localAudio and can store wrong value.
* Adds notification for new non preferred devices.
A notification is shown which gives an option to the user to select and use the newly plugged devices.
Adding custom button and handler for the action to the notifications.
* Changes logic to search and handle all newly added devices from array.
* Moves some utility methods to features/base/devices.
The state about currently opened devices is filtered and not stored, where we only store when user selects a device preferences.
Also allow changing input devices for Firefox when we are not in a conference.
* Prints errors in case of wrong initialization.
Not printing can masks some errors in the code.
* Allow only one Follow Me moderator in a meeting.
* Sends Follow Me state with all presences of the moderator.
This fixes an issue where the moderator sends the Follow Me state and then for example mute or unmute video (this will produce a presence without Follow Me state) and the new comers will not reflect current Follow Me state till a change of it comes.
* Changes fixing comments.
* Changes fixing comments.
Dear reader, I'm not proud at all of what you are about to read, but sometimes
life just gives you lemons, so enjoy some lemonade!
Joining a conference implies first creating the XMPP connection and then joining
the MUC. It's very possible the XMPP connection was made but there was no chance
for the conference to be created.
This patch fixes this case by artificially genrating a conference terminated
event in such case. In order to have all the necessary knowledge for this event
to be sent the connection now keeps track of the conference that runs it.
In addition, there is an even more obscure corner case: it's not impossible to
try to disconnect when there is not even a connection. This was fixed by
creating a fake disconnect event. Alas the location URL is lost at this point,
but it's better than nothing I guess.
The Audio.js setRef callback does not behave like react ref callback
in that the former will not have fired before componentDidMount
but the later will have. So for audio output preview, trying to set
sink id on mount will no-op because it does not have a ref yet to
Audio.js, possibly leading to audio output previews playing on
the default speaker device. This generally has not been a user
visible problem due to coincidence; other re-renders necessary
by the parent of audio output preview will have triggered
componentDidUpdates on the audio out preview, which would then
set the sink id on the Audio.js ref it should have received
by then.
Searching for a device (id) by label alone can result in
false results when devices share labels, such as a mic
and speaker having the same label. To prevent such,
specify the device kind to be found instead of iterating
over all device kinds.
When the iFrame api is used to set a preferred audio output using
options passed into the JitsiMeetExternalAPI constructor, no logic
fires to actually change the audio output destination.
Devices of different kinds can have the same id, such as speaker
and mic both being default. Using id only can then lead to
incorrectly setting device descriptions in the current devices
object.
* ref(display-name): do not pass in display name
The component gets the state itself from redux.
* fix(display-name): do not default name to placeholder name
The web display name component supports inline editing of
the name. Problems can occur when the displayed name
differs from the actual saved name, because participants
without a display name, including the local user, have
a different, default display name displayed. So when
editing starts, the input field is populated with the
default name. To workaround such while supporting fetching
the display name using mapStateToProps, pass in both the
name which should be shown and the name value saved in
settings.
* ref(display-name): rename methods
If user dismisses the not topmost notification the timeout will be
cleared and a new one will not be set, because the top notification
remained the same (see the if at line 90).
The docs of 'componentDidUpdate' say that it's not called for the
initial render. If the component is added to the DOM with 1 notification
already, then the update will not happen and timeout will never be set
which will effectively break the timeouts chain.
Using anything non-serializable for action types is discouraged:
https://redux.js.org/faq/actions#actions
In fact, this is the Flow definition for dispatching actions:
declare export type DispatchAPI<A> = (action: A) => A;
declare export type Dispatch<A: { type: $Subtype<string> }> = DispatchAPI<A>;
Note how the `type` field is defined as a subtype of string, which Symbol isn’t.
* Removes unused ADD_PEOPLE_APP_NAME
* Moves deep-link header background and logo size as variables.
* Fixes more numbers page space in the header.
* Fixes left padding on deep-linking mobile page.
Consolidate all failure cases into a single one: CONFERENCE_TERMINATED. If the
conference ended gracefully no error indicator will be present, otherwise there
will be.
There is no need for AbstractApp to require some getWindowLocation function.
It's only used in one place and we even polyfill it on mobile.
Thus replace it's usage with more specific functions.
* Adds new format of phoneList service and re-design dial in numbers page.
Adds flags and country names (with translations) for the numbers if using the new format.
* Fixes tests and fixes get default number.
* Updates swagger with new format.
* Moves html back yo table.
Fixes displaying on mobile and also the tel: URI generation. The tel: URI is tested on Android and iOS and seems to work (Android was not interpreting 'p', but both seems to like ',').
* Fixes a wrong return statement.
* Small fixes.
The conference disconnection process is asynchronous which means there's
no guarantee that there will be CONFERENCE_LEFT event for the old
conference, before the next conference is joined. Because of that we can
end up with two simultaneous calls on the native side which is not
always supported. End the call on CONFERENCE_WILL_LEAVE to fix this
corner case.
* fix(large-video): do not show avatar if no url
By default the large video dominant speaker avatar
has an empty src, which will result in a broken
image displaying. There is also disconnect with
non-react code trying to set an undefined src.
To prevent such until local avatar generation
work is done in the future, just don't show the
avatar.
* fix(conference): set the room instance earlier
Set the room instance on APP.conference before triggering
a redux update of the conference being set,, because
middleware can then fire and call methods on APP.conference
that depend on the room being set.
* get local participant directly from store instead of from global
This reverts commit 7c911eca96.
I'm dumb. We need global mode because otherwise lastIndex is not updated in the
regex object, which we rely upon, so this is intentional.
e729f0948c contained an off-by-one error:
URI_PROTOCOL_PATTERN includes the colon, so after applyting the regex we are
left with something like '//example.com/room' thus we only need to strip the
first 2 characters.
🤦
Looks like custom-scheme links no longer work in all browsers. They do on
Firefox, but the don't in Chrome and other default browsers.
So, switch to intent links on Android:
https://developer.chrome.com/multidevice/android/intents
Example:
```
<a href="intent://meet.jit.si/test123#Intent;scheme=org.jitsi.meet;package=org.jitsi.meet;end">Open Jitsi Meet</a>
```
Dominant speaker events can trigger local participant updates
without a display name. Do not update the name unless there
is an explicit update in the action.
Instead of bundling it in lib-jitsi-meet, which unnecessarily increases
lib-jitsi-meet's bundle size, polyfill it here so it's available in the global
scope, just like the web does.
* feat(Android): implement ConnectionService
Adds basic integration with Android's ConnectionService by implementing
the outgoing call scenario.
* ref(callkit): rename _SET_CALLKIT_SUBSCRIPTIONS
* ref(callkit): move feature to call-integration directory
* feat(ConnectionService): synchronize video state
* ref(AudioMode): use ConnectionService on API >= 26
Not ready yet - few details left mentioned in the FIXMEs
* feat(ConnectionService): add debug logs
Adds logs to trace the calls.
* fix(ConnectionService): leaking ConnectionImpl instances
Turns out there is no callback fired back from the JavaScript side after
the disconnect or abort event is sent from the native. The connection
must be marked as disconnected and removed immediately.
* feat(ConnectionService): handle onCreateOutgoingConnectionFailed
* ref(ConnectionService): merge classes and move to the sdk package
* feat(CallIntegration): show Alert if outgoing call fails
* fix(ConnectionService): alternatively get call UUID from the account
Some Android flavours (or versions ?) do copy over extras to
the onCreateOutgoingConnectionFailed callback. But the call UUID is also
set as the PhoneAccount's label, so eventually it should be available
there.
* ref(ConnectionService): use call UUID as PhoneAccount ID.
The extra is not reliable on some custom Android flavours. It also makes
sense to use unique id for the account instead of the URL given that
it's created on the per call basis.
* fix(ConnectionService): abort the call when hold is requested
Turns out Android P can sometimes request HOLD even though there's no
HOLD capability added to the connection (what!?), so just abort the call
in that case.
* fix(ConnectionService): unregister account on call failure
Unregister the PhoneAccount onCreateOutgoingConnectionFailed. That's
before the ConnectionImpl instance is created which is normally
responsible for doing that.
* fix(AudioModeModule): make package private and run on the audio thread
* address other review comments
* fix(local-recording): allow config override to enable
Config overrides are not set until some time after
APP_WILL_MOUNT has completed and not in the same execution
context as when APP_WILL_MOUNT is called. So instead
choose recording controller initialization at a later time.
The time chosen is after conference join because the
controller needs the conference instance to work.
* remove redundant conditional check
Analytics is erroring when unpinning because the logged
event sends null for the objectId. The objectId should
be the id of the person getting unpinned.
This feature is intended for spot. Spot can have an
HDMI -> usb adapter hooked up to it. In that case,
attempting to screenshare should use that adapter
as a screensharing source. Jitsi-Meet should pass
a configured screenshare source into lib-jitsi-meet
so it can be used as a source.
Provide a default and builtin default implementation which finishes the
Activity, same as before.
What this PR removes is the ability to provide a custom default handler because
applications can already take this decision when calling `onBackPressed`. In
addition, make `onBackPressed` return `void` because it's virtually impossible
for it to return `false` (that would mean that there is no
`ReactInstanceManager`, which means there is no app to begin with).
In addition, remove the use of `BackAndroid` since `BackHandler` contains an iOS
shim now.
Instead of handling the side effect of navigating to another
url from within componentWillReceiveProps, try to match the
same logic instead in componentDidUpdate.
Touch feedback manifests in some ugly black border bleeding out of the thumbnail
itself. Since we already provide feedback (be that by adding the blue border in
case of pinning, or showing the menu in case of long press) the perception is
the same, without the graphical glitch.
- Reset some state on the singletons conference
and VideoLayout.
- Add a way for LocalVideo to clean itself up
by sharing logic with the other SmallVideos.
- Add clearing of chat messages so they don't
linger.
- Remove some UI event listeners.
componentWillMount is a deprecated lifecycle method;
componentDidMount should be used to kick off things
like ajax. In the case of the _App hierarchy, a promise
chain is used to perform initialization, and it is
first started in the constructor by initializing
storage. However, by the time storage is initialized,
resolving the first promise, _App has already mounted.
So, move it all to the componentDidMount lifecycle.
The package now requires using a ModalTransition component
to handle animations. The existing DialogContainer component
has been split into native and web implementations to support
this change.
It's possible for the YouTube api to return zero broadcasts
or broadcasts without any streams--streams are what are
associated with stream keys. In this case, instead of showing
an empty selector or no selector, show a message with a link
to where the stream key can be obtained.
Provide a client-side notice if the YouTube live stream key
looks like it might be in the wrong format. Normally the
stream key looks like 4 groups of 4 numbers and letters,
each separated by a dash. The warning does not block submission
in case YouTube changes their stream key format.
Updating react-native-fast-image brings a couple of interesting changes:
- onLoad is not called for cached images (reported and ignored upstream)
- load progress not working if component not displayed (on Android)
In order to fix this, a combination of 2 approaches was used:
- onLoadEnd / onError are used to detect if the image is loaded
- off-screen rendering is used on Android to get progress events
While implementing the above, yours truly noticed the complexity was increasing
way too much, so some extra refactoring was also performed:
- componentWillReceiveProps is dropped
- an auxiliary component (AvatarContent) is used for the actual content of the
Avatar, with the former passing the key prop to the latter
Using the key prop ensures AvatarContent will be recreated if the URI changes,
which is not a bad idea anyway, since the new image needs to be downloaded.
* Replaces smileys and the logic of replacing links/emails.
Now using react-emoji-render and react-linkify.
* Fixes heart emoji.
It is known that current implementation doesn't work with ascii emojis that contain < or >, like >:( >:-( </3 <\3 <3. Making those work may bring some xss issues.
* Adds '_blank' and 'noopener noreferrer' to the replaced links.
* Fixes package-lock links (http vs https).
* Fixes comments.
The upstream package has been unmaintained for 2 years now, and making the litle
changes needed as React Native needs them is getting old. The actual
funcionality is a couple of one-liners plus tons of boliterplate, which gets
reduced by quite a bit if we just embed it. So here it goes.
It doesn't seem like videoTrack needs to be set onto state
if it can be accessed directly from props. Removing the state
automatically removes the deprecated componentWillReceiveProps.
Filmstrip remote thumbnails display under certain conditions, as
defined in filmstrip/functions.web.js. Previously the raw
participant count was used, which included fake participants.
Using the selector getParticipantCount excludes fake participants,
causing YouTube thumbnails to remain hidden in a 1-on-1 call.
- Derive the showOverlay state. When the sidebar should be hidden,
the internal showOverlay state should remain true until the
animation hides it. When the sidebar should show, the showOverlay
state should become true immediately.
- Use PureComponent to prevent additional animation triggers
instead of explicitly checking changes to the "show" prop.
Based on react-native docs, looks like animations should be
started after mount. Updating animation states I'm not certain
on so I moved it to componentDidUpdate and tested with the
live streaming label to ensure the component still animated fine.
To kill componentWillMount, call destroyLocalTrack after mount.
Navigation to the blank page was synthetically forced and no
UI issues were noticed, possibly because destroyLocalTrack may
already be async so destruction may already have been occurring
after mount.
For the most part the changes are taking the "static propTypes" declaration off
of components and declaring them as Flow types. Sometimes to support flow some
method signatures had to be added. There are some exceptions in which more had
to be done to tame the beast:
- AbstractVideoTrack: put in additional truthy checks for videoTrack.
- Video: add truthy checks for the _videoElement ref.
- shouldRenderVideoTrack function: Some component could pass null for the
videoTrack argument and Flow wanted that called out explicitly.
- DisplayName: Add a truthy check for the input ref before acting on it.
- NumbersList: Move array checks inline for Flow to comprehend array methods
could be called. Add type checks in the Object.entries loop as the value is
assumed to be a mixed type by Flow.
- AbstractToolbarButton: add additional truthy check for passed in type.
- Change "features/chat" to support listening for new chat messages
and storing them, removing that logic from conference.js.
- Combine chat.scss and side_toolbar_container.css, and remove unused
scss files. Chat is the only side panel so the two concepts have
been merged.
- Remove direct access to the chat feature from non-react and non-redux
flows.
- Modify the i18n translate function to take in an options object.
By default the option "wait" is set to true, but that causes
components to mount after the parent has been notified of
an update, which means autoscrolling down to the latest rendered
messages does not work. With "wait" set to false, the children
will mount and then the parent will trigger componentDidUpdate.
- Create react components for chat. Chat is the side panel
plus the entiren chat feature. ChatInput is a child of Chat and
is used for composing messages. ChatMessage displays one message
and extends PureComponent to limit re-renders.
- Fix a bug where the toolbar was not showing automatically when
chat is closed and a new message is received.
- Import react-transition-group to time the animation of the
side panel showing/hiding and unmounting the Chat component.
This gets around the issue of having to control autofocus if the
component were always mounted and visibility toggled, but
introduces not being able to store previous scroll state
(without additional work or re-work).
* feat: Displays the server region in the stats panels.
* feat: Displays the server count in the local stats panel.
* ref: Renames a variable.
* fix: Makes bridgeCount a number, clarifies docs.
* chore: Updates lib-jitsi-meet to 1ac6df97e3aa5ff880129a95754d491d89ea8c25.
There are (at least) two changes that are breaking:
- defaultTab is gone
- The re-rendering logic looks to have been re-written so that
passing in a new array of tabs causes a re-render, which can
reset the currently selected tab.
The fixes involved removing defaultTab from each tab configuration,
as it is no longer respected anyway. Also, instead of letting Tabs
be uncontrolled and allowing it to set its own selected, which
would result in the first tab automatically being selected on
Tabs re-render, use Tabs a controlled prop to dicate which
tab is selected; this is accomplished by specifying a selected
prop.
* feat(tile-view): initial implementation for mobile
- Create a tile view component for displaying thumbnails in a
two-dimensional grid.
- Update the existing TileViewButton so it shows a label in the
overflow menu.
- Modify conference so it can display TileView while hiding
Filmstrip.
- Modify Thumbnail so its width/height can be set and to prevent
pinning while in tile view mode.
* use style array for thumbnail styles
* change ternary to math.min for expressiveness
* use dimensiondetector
* pass explicit disableTint prop
* use makeAspectRatioAware instead of aspectRatio prop
* update docs
* fix docs again (fix laziest copy/paste job I've ever done)
* large-video: rename onPress prop to onClick
* change forEach to for...of
* use truthy check fallthrough logic instead of explicit if
* put tile view button second to last in menu
* move spacer to a constant
* the magical incantation to make flow shut up
Extracts methods which share the common logic. There are still some
leftovers on the web side left which are not used on RN. But this can be
a first step.
* Add joing button to the calendar events.
* Add space between calendar lines.
* Adjust recent list name.
* Fixes test failure.
* Restyle mobile recent list message.
* Add analytics events.
* Addressing PR review comments.
The current code was splitting it on a space, which made nicknames such as “Link Mauve” appear as “Link”, whereas it gets displayed correctly everywhere else in the UI.
* Implements calendar entries edit.
Share text generation between calendar-sync and the share-room feature.
* Fixing comments.
* Clone the event element we modify on update.
If a relative BOSH URL is found (as docker-jitsi-meet does) construct a full URL
based on the location URL and context root.
Also remove some default options since we need the config file anyway, so I see
no point in doing the extra work.
Yours truly refactored routing in https://github.com/jitsi/jitsi-meet/pull/3222
and broke it. When a bare room is entered the pathname was not updated when
applying the default URL.
* Refactor calendar-sync feature to be loaded on web.
For the web part it just adds new property to enable/disable calendar web integration, disabled by default.
* Initial implementation of retrieving google calendar events.
* Initial implementation of retrieving microsoft calendar events.
* Fixes comments.
* Rework to use the promise part of microsoft-graph-client api.
* Moves dispatching some actions, fixing comments.
* Makes sure we do not initializeClient google-api client multiple times.
* Do not try to login when fetching calendar entries.
The case where there is a calendar type google selected, but not logged in, trying to login on loading welcome page will show a warning that it tried to open a popup, which was denied by browser.
* Updates profile display data on sign in.
* Propagate google-api state to calendar-sync only if we use google cal.
* Adds sign out action.
* Clears the event listener when the popup closes.
* Clears calendarIntegrationInstance on signOut.
* WIP: UI for calendar settings, refactor auth flows
* Clean up some unused constants, functions and exports.
* break circular dependency of function and constant
* Exports only isCalendarEnabled from functions.
* Checks isSignedIn when doing fetchCalendarEntries on web.
* address comments
List microsoftApiApplicationClientID in undocument config.
remove unused SET_CALENDAR_TYPE action
use helper for calendar enabled in bootstrap
reorder actions
reorder imports
change order of signin -> set type -> update profile
add logging for signout error
reword setting dialog desc to avoid redundancy
add jsdoc to microsoft button props
reorder calendar constants
move default state to reducer (not reused anywhere)
update comment about calendar-sync due to removal of getCalendarState
update comment for getCalendarIntegration
remove vague comment
alpha order reducer, return default state on reset
alpha order persistence registry
remove unnecessary getType from apis
update comments in microsoftCalendar
alpha order google-api exports, use api.get in loadGoogleAPI
set jsdoc for google signin props
alpha order googleapi methods
fix calendartab docs
* Moves fetching calendar from APP_WILL_MOUNT to SET_CONFIG.
The web part needs configuration in order to refresh tokens (Microsoft).
* Fixes storing token expire time and refreshing tokens in Microsoft impl.
* Address comments
updateProfile changed to getCurrentEmail
rename result to results
stop storing integration in redux, store if ready for use
use existing helpers to parse redirect url
* update jsdocs, get google app id from redux
* clear integration instead of actual sign out
* feat(tile-view): initial implementation for tile view
- Modify the classname on the app root so layout can adjust
depending on the desired layout mode--vertical filmstrip,
horizontal filmstrip, and tile view.
- Create a button for toggling tile view.
- Add a StateListenerRegistry to automatically update the
selected participant and max receiver frame height on tile
view toggle.
- Rezise thumbnails when switching in and out of tile view.
- Move the local video when switching in and out of tile view.
- Update reactified pieces of thumbnails when switching in and
out of tile view.
- Cap the max receiver video quality in tile view based on tile
size.
- Use CSS to hide UI components that should not display in tile
view.
- Signal follow me changes.
* change local video id for tests
* change approach: leverage more css
* squash: fix some formatting
* squash: prevent pinning, hide pin border in tile view
* squash: change logic for maxReceiverQuality due to sidestepping resizing logic
* squash: fix typo, columns configurable, remove unused constants
* squash: resize with js again
* squash: use yana's math for calculating tile size
When newly joined clients register for XMPP events upon
CONFERENCE_JOINED, those events that is carried by presence (e.g. START_COMMAND) was
already fired.
Temporary solution is to let the client send a ping message after
registering XMPP event listeners. The moderator will respond with
pong, which forces the presence to be resent.
index.js of local recording
local-recording(ui): recording button
local-recording(encoding): flac support with libflac.js
Fixes in RecordingController; integration with UI
local-recording(controller): coordinate recording on different clients
local-recording(controller): allow recording on remote participants
local-recording(controller): global singleton
local-recording(controller): use middleware to init LocalRecording
cleanup and documentation in RecordingController
local-recording(refactor): "Delegate" -> "Adapter"
code style
stop eslint and flow from complaining
temp save: client status
fix linter issues
fix some docs; remove global LocalRecording instance
use node.js packaging for libflac.js; remove vendor/ folder
code style: flacEncodeWorker.js
use moment.js to do time diff
remove the use of console.log
code style: flac related files
remove excessive empty lines; and more docs
remove the use of clockTick for UI updates
initalize flacEncodeWorker properly, to avoid premature audio data transmission
move the realization of recordingController events
from LocalRecordingButton to middleware
i18n strings
minor markup changes in LocalRecordingInfoDialog
fix documentation
* feat: Displays the E2E RTT in the connection stats table.
* fix: Whitelists the ping config properties.
* ref: Addresses feedback.
* npm: Updates lib-jitsi-meet to e097a1189ed99838605d90b959e129155bc0e50a.
* ref: Moves the e2ertt and region to the existing stats object.
* feat(welcome-page): be able to open settings dialog
- Create a getter for getting a settings tab's props so the device
selection tab can get updated available devices.
- Be able to call a function from a tab after it has mounted. This is
used for device selection to essentially call enumerateDevices on
the welcome page so the device selectors are populated.
- Remove event UIEvents.AUDIO_OUTPUT_DEVICE_CHANGED. Instead directly call
setAudioOutputDeviceId where possible.
- Fix initialization of the audioOutputDeviceId in settings by defaulting
the audio output device to the one set in settings.
* squash: updateAvailableDevices -> getAvailableDevices, add comment for propsUpdateFunction
Use react-native-fastimage, which uses 2 full-native image impleentations using
well known and mature (native) libraries.
This gets us rid of 2 libraries which were observerd as a source of bugs and
created trouble with dependencies: react-native-fetch-blob and
react-native-img-cache. They are also no longer well maintained.
* ref(filmstrip): create an empty container for local filmstrip move
This might be necessary for tile view. To support making the
local video display at the end of remote videos while in tile
view, but separateed from scrollable remote videos, moving
the local video might be necessary. By creating an empty
container, there is a target for local video to move to.
* squash: rename id
* [WEB] add UI for transcription
* add analytics event for button, do not use global APP object
* use props instead of state, use local conference to kick participant
* put imports in alphabetical order
* add translation for TranscribingLabel
* fix merge conflict
* add closed caption button
* purge OverFlowMenuItem which starts and stops Transcription
* readd closed caption icon and fix small issues due to purge
* delete unused icon in _font.scss
* ref(filmstrip): apply filmstrip class to Conference root
Instead of apply the layout class to the body, it can be
applied to Conference. This will allow easier switching
between tile filmstrip and horizontal/vertical filmstrip.
* squash: fix typo filstrip
Move away from middleware and instead update video quality
when the selected video quality updates in redux. This also
lead to removing of automatically exiting audio only because
with the change it's not so readily possible to tell if the
user switched off audio only by re-selecting the already
preferred video quality. Removing this automagic removed
some additional checking done for mobile.
The internal max will be used for tile view. Whatever the
user has set for preferred video quality, the internal
maximum will be respected. This allows for the case where
the user prefers high definition video, but in tile view
it only makes sense to send low definition; ux wise the
user is allowed to continue messing with the video quality
slider.
- "preferred" is being appended because in tile view there is a
concept of what the user prefers to be the maximum video quality
but there is also a maximum respected internall. For example,
the user may prefer HD, but in tile view the tiles may be small
so internall the preferred would be set to LD.
- "receive" is being renamed to "receiver" to be consistent with
the naming in lib-jitsi-meet.
* Get back the Notice class
* Add Notice component in the Conference web view
* Notice is not exported in index.js. Only used internally by
Conference.
* noticeMessage value obtained from features/base/config
* using mapStateToProps
* value is stored in the internal _message property
* Notice component, orignal in `toolbox` is moved from
`toolbox/components` to `conference/components`
* Notice component only implemented and renderable in web views
* Dummy `conference/components/Notice.naive.js`
This patch is partially based in the removed logic included
originally in:
commit 59a74153dc
(tag: jitsi-meet_1886, tag: jitsi-meet_1885, tag: 1797, tag: 1796)
Author: Ilya Daynatovich <shupuercha@gmail.com>
Date: Mon Mar 20 11:04:54 2017 -0500
Toolbar notice as React Component
In reply to: Saúl Ibarra Corretgé @saghul> comments
Signed-off-by: Pablo Saavedra <psaavedra@igalia.com>
* ref(popover): allow for popover content from the right
Popovers contents can display to the left of the trigger
and above the trigger. Add the ability to display to the
right of the trigger my adding mouseover padding. This
may be needed for tile view, depending on where the triggers
are located.
* squash: abstract common css proprties into placeholder class
* fix(welcome-page): css tweaks in prep for branded welcome page
- Watermarks should no longer depend on toolbar size. The left watermark made
room for the toolbar when the toolbar was on the left side of the screen, but
the toolbar has been moved to the bottom. The right watermark...well it'll
clash with the vertical filmstrip but at least the margins will be consistent
with the left watermark.
- Apply new font-family so fonts are more likely to be consistent across the
app. Design likes SF UI and keeps requesting it so use it by default.
- Change sizings of welcome page header to be more responsive. This will help
the header be scrollable when there is no additional content and the header
overflows.
- Change colors of the welcome page header and remove background image that
was in the header. Leave in the dom for the background image in case other
deployments need to continue showing an image.
- Add a period to the title of the welcome page.
- Move watermarks dom location as it is not part of the header; it's part of the
whole page.
* [squash] Size and font adjustments. Renaming.
* ref(large-video): combine selectParticipant logic from web
Currently native/middleware/redux has its own logic for selecting a participant
on the bridge. To have the logic web respect that logic, a few changes are
needed.
- Web no longer has its own call to selectParticipant.
- To keep in line with web logic selectParticipant action should act even when
there is no track. This makes it so that when a participant does get a track
that the bridge will send high quality. The bridge can already handle when the
selected participant does not have a video track.
- The timing of web is such that on joining an existing conference, a
participant joins and the participant's tracks get updated and then the
conference is joined. The result is selectParticipant does not get fired
because it no-ops when there is no conference. To avoid having to make
uncertain changes (to be lazy), update the selected participant on conference
join as well.
* squash: update comment, pass message to error handler
It will only be requested if a user joins a meeting or flips the switch from
video to audio and back, but never as the first thing when the welcome page is
mounted.
It's a separate view (on the native side) and app (on the JavaScript side) so
applications can use it independently.
Co-authored-by: Shuai Li <sli@atlassian.com>
Co-authored-by: Pawel Domas <pawel.domas@jitsi.org>
* Show subtitles when Jigasi sends transcription results in JSON
* fix: Import PropTypes from prop-types.
* apply feedback on initial PR
* Changed Object to Map, alphabetic ordering fixes ,css changes in transcription subtitles
* Sends Map of transcriptMessages as prop to Component
* Documentation fixes and uses config in redux state
* Minor doc fix
* rename feature 'transcription' to 'subtitles'
* Moves subtitles config to interfaceConfig and minor fixes
* minor lint fix
BaseApp does all the heavy-lifting related to creating the redux store,
navigation, and so on.
App currently handles URL props and actually triggering navigation based on
them.
Move it away from AbstractApp into an auxiliary function. In addition, introduce
a new `getServerURL` function which gets the configured server URL and defaults
to meet.jit.si as before.
It was never used in practice, and it would be very cumbersome to use, since it
would have to bcreated with all the middlewares and reducers we need. After
discussing this with Lyubomir, we are confident this is not going to be needed
so it can go.
Unfortunately, as the Jitsi Meet development evolved the routing mechanism
became more complex and thre logic ended up spread across multiple parts of the
codebase, which made it hard to follow and extend.
This change aims to fix that by rewriting the routing logic and centralizing it
in (pretty much) a single place, with no implicit inter-dependencies.
In order to arrive there, however, some extra changes were needed, which were
not caught early enough and are thus part of this change:
- JitsiMeetJS initialization is now synchronous: there is nothing async about
it, and the only async requirement (Temasys support) was lifted. See [0].
- WebRTC support can be detected early: building on top of the above, WebRTC
support can now be detected immediately, so take advantage of this to simplify
how we handle unsupported browsers. See [0].
The new router takes decissions based on the Redux state at the time of
invocation. A route can be represented by either a component or a URl reference,
with the latter taking precedence. On mobile, obviously, there is no concept of
URL reference so routing is based solely on components.
[0]: https://github.com/jitsi/lib-jitsi-meet/pull/779
* fix(connection): reload immediately on possible split-brain
There isn't an explicit way to know when a split brain
scenario has happened. It is assumed it arises when an
"item-not-found" connection error is encountered early
on in the conference. So, store when a connection has
happened so it be calculated how much time has
elapsed and if the threshold has not been exceeded
then do an immediate reload of the app instead of
showing the overlay with a reload timer.
* squash: rename isItemNotFoundError -> isShardChangedError
This commit adds a state getter that considers checking the enabled/disabled state of the calendar feature, so then other features don’t have to do it manually.
Adds a fatal error state on which will depend whether or not the reload
screen is to be displayed. It is to happen when a relevant fatal error
action is not claimed by any feature for error recovery (the recoverable
flag is not set).
- Instead of having 4 listeners for local connection status
updates and 1 for remote, remove two of the redundant listeners.
- Instead of calling into 4 separate VideoLayout methods to update a
participant's connection status, expose one handler.
Up until now, mobile was oblivious to participants' presence state. Presence
state handling is required (probably, amongst other things) for "call flows".
So, let's add it! This is done by gathering the presence state when a
participant first joins, and handling subsequent changes.
Fix the "mute ping pong" for once and for all. This patch takes a new approach
to the problem: it keeps track of the user generated CallKit transaction ations
and avoids calling the delegate method in those cases.
This results in a much cleaner and easier to understand handling of the flow: if
the delegate method is called it means the user tapped on the mute button. When
we sync the muted state in JS with CallKit the delegate method won't be called
at all, thus avoiding the ping-pong altogether.
In addition, make sure all CallKit methods run in the UI thread. CallKit will
call our delegate methods in the UI thread too, thsu there is no need to
synchronize access to the listener / pending action sets.
* feat(settings): setting dialog
- Move device selection, profile edit, language select, moderator
options, and server auth into one modal with tabs.
- Remove side panel profile and settings and logic used to update
them.
- Pipe server auth status into redux to display in the settings
dialog.
- Change filmstrip only device selection popup to use the new
stateless settings dialog component.
* squash: do not show profile tab if not guest
* squash: profile button not clickable if no profile to show
* squash: nits
* ref: Settings dialog.
Emits CONFERENCE_FAILED in response to CONNECTION_FAILED event
which then triggers JitsiConference.leave() through the middleware
processing. Also base/conference state will be adjusted. It is to have
a consistent redux state in which both connection and conference are
failed. It could happen that in a buggy environment the XMPP connection
is dropped, but the media is still flowing which would result in weird
user experience.
The change to mobile/external-api is required to not emit
CONFERENCE_FAILED for CONNECTION_FAILED if the conference has been
started, because base/conference state will still hold conference
instances which are to be ended by other means and result in the
appropriate event (which will adjust the base/conference state).
Currently the listeners for disconnected and failed connection events
are unsubscribed as soon as the connection is established, so
the CONNECTION_DISCONNECTED is never triggered which would clear the
'connection' field. This commit will clear the 'connection' state on
CONNECTION_WILL_CONNECT. It's needed anyway given that there's no
guarantee on when and if the async disconnect operation will finish.
One issue caused by the 'connection' not cleared was that
CONNECTION_FAILED was not reduced correctly and the reload screen was
not displayed for the following scenario:
1. Join and leave any working conference.
2. Turn off network connectivity on the device.
3. Wait for CONNECTION_FAILED. The reload screen will not be displayed,
because CONNECTION_FAILED is not reduced correctly, because the old
'connection' value is still there.
Your truly introduced this regression in
8c7a3f16b1, alas.
The audio only mode is used to set the CallKit call type. This affects the
behavior on the recent calls entries (calls are marked either as audio or video
calls).
Sync both at the start and for transitions. The previous code was working by
chance (in a way): when the CallKit UI is presented the local video is muted,
which triggers a SET_VIDEO_MUTED action, at which point the audio-only mode was
checked for. Now we are more explicit and act on SET_AUDIO_MUTED.
Read the muted state from the track itself instead of from base/media. This
avoid expressing the incorrect desire when the call starts muted because
permission was never granted.
In the current middleware logic, when the local participant becomes
dominant speaker, a new participant can be selected to receive
high quality video from. This means large-video could potentially
do a switch to another participant when the local participant
becomes dominant speaker. Prevent such behavior.
* Adds an option to disable features based on token data.
Reverts changes from b84e910086, removes disableDesktopSharing option and an interface_config option.
* Disable recording button based on token features data.
Hide recording if local participant isGuest and roles based on token.
When enableUserRolesBasedOnToken is enabled we were not hiding the record button for guests.
* Adds filtering of jibri iqs and rayo based on features.
Moves feature checking in separate utility function.
Renames utility method.
* Adds a footer text when outbound-call is not feature enabled.
* Fixes comments.
Use it unless the connection is not ACTIVE. We don't really care if it's
recovering or whatever, if it's not active it has problems, so that's that.
This fixes a potential edge case in which the connection remains in RESTORING
state for some time.
* ref(toolbar): show recording features based on explicit configs
* squash: bring back button configs, use final config names
* squash: update interfaceConfig comment, remove unused config whitelist
* squash: change order of button enabled checks to reduce diff
* squash: fileRecording -> fileRecordings
* feat(recording): add sounds for when recording starts and stops
* squash: use constants, play sounds for file only
* squash: rename recordingStopped.mp3 -> recordingOff.mp3
* squash: flip var declaration for alpha order
Layout:
Use an absolute-fill view as the background with the sidebar on top of. This
greatly simplifies styling, as there is no need to calculate how large the
backdrop needs to be.
Animation:
Switch to a translateX transform animation. This serves 2 purposes: first,
there seems to be a bug somewhere in React Native 0.51-0.55 where the content
that is being animated starts to be clipped. Very weird! But more importantly,
translateX transmorm animations are supported by the native animation driver!
https://facebook.github.io/react-native/blog/2017/02/14/using-native-driver-for-animated.html8f5ebe5952/Libraries/Animated/src/NativeAnimatedHelper.js (L138-L176)
This makes the animation more performant and buttery smooth.
Some small cleanups are also included here.
Instead of keeping dominant speaker locally, get it from redux and be
updated when the dominant speaker changes. This is in an attempt to mimic
the video layout being reactified and connected to redux.
The visibility of the toolbar can be toggled by interacting with the main screen.
This change allows the toolbar to be configured to be 'always visible'. This voids
the 'toggle' functionality.
Simplify parts of the logic introduced in
11b7144ad0.
Specificaly, using all the state change avoiding functions doesn't give us much
since we need to copy the state for sure.
Makes sure that whenever a conference is left or switched, the local
participant's id will be equal to the default value.
The problem fixed by this commit is a situation where the local
participant may end up sharing the same ID with it's "ghost" when
rejoining a disconnected conference. The most important and easiest to
hit case is when the conference is left after the CONFERENCE_FAILED
event.
Another rare and harder to encounter in the real world issue is
where CONFERENCE_LEFT may come with the delay due to it's asynchronous
nature. The step by step scenario is as follows: trying to leave a
conference, but the network is not doing well, so it takes time,
requests are timing out. After getting back to the welcome page the
the CONFERENCE_LEFT has not arrived yet. The same conference is joined
again and the load config may timeout, but it will be read from the
cache. Now the network gets better and conference is joining which
results in our ghost participant added to the redux state. At this point
there's the root issue: two participants with the same id, because the
local one was neither cleared nor set to the new one yet
(PARTICIPANT_JOINED come, before CONFERENCE_JOINED where we adjust the
id). Then comes CONFERENCE_JOINED and we try to update our local id.
We're updating the ID of both ghost and local participant. It could be
also that the delayed CONFERENCE_LEFT comes for the old conference, but
it's too late and it would update the id for both participants.
The approach here reasons that the ID of the local participant
may be reset as soon as the local participant and, respectively, her ID
is no longer involved in a recoverable JitsiConference of interest to
the user and, consequently, the app.
Co-authored-by: Pawel Domas <pawel.domas@jitsi.org>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
If the ID of a remote participant was the same as the ID of the local
participant (across multiple conferences), removing the remote
participant on PARTICIPANT_LEFT would remove the local participant.
Like the preceding commit "ref(base/conference): clear the 'conference'
field on WILL_LEAVE", this commit is part of the story how we are to
deal with conferences which take noticeable time to leave.
Like the preceding commit "ref(base/conference): clear the 'conference'
field on WILL_LEAVE", this commit is part of the story how we are to
deal with conferences which take noticeable time to leave.
If a leave is delayed and the leaving JitsiConference manages to sneak a
PARTICIPANT_JOINED in, it may create a remote participant who even
collides with the local participant.
With so many abstractions called conference, I'm not surprised I made a
mistake and my reviewer didn't catch it.
As we are transitioning from remote participants identified by ID alone
to an ID-conference pair, the subsequent commits "Protect against late
PARTICIPANT_JOINED" and "Refine PARTICIPANT_LEFT for ID collisions"
caught the error.
Pawel Domas said:
The conference state field is referring to the current conference in
progress, so it feels like this field should be cleared as soon as we
declare that the conference is being left and the asynchronous process
of leaving the conference starts (which happens on
CONFERENCE_WILL_LEAVE).
Lyubo Marinov said:
Merely setting conference to undefined is incomplete because there are
other redux state properties associated with conference.
What we're doing here is redefining the redux action
CONFERENCE_WILL_LEAVE:
The redux action CONFERENCE_WILL_LEAVE represents the order of the user
to leave a JitsiConference instance. From the user's perspective, there's
no going back (with respect to the instance itself). The app will perform
due clean-up like leaving the associated room, but the instance is no
longer the focus of the attention of the user and, consequently, the app.
Now CONFERENCE_LEFT and CONFERENCE_WILL_LEAVE have more in common than
before and we can do a much better job by expressing the common parts in
source code. Additionally, our source code can be rewritten to better
express the meaning of any of these two actions.
Co-authored-by: Pawel Domas <pawel.domas@jitsi.org>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
Add ability to provide a display name in the configOverwrite object that
when available it will be used to customize the name of the meeting in
callkit screen and recent call list.
Co-authored-by: Daniel Ornelas <daniel.ob64@gmail.com>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
This zOrder change fixes the issue that the scrollable filmstrip videos
rendered in front of the local participant, however there is still an
issue that needs to be fixed later: The rendered videos should have
overflow: 'hidden' property applied so then they don't get rendered when
scrolled out of the ScrollView, that property however doesn't seem to
work for Video components.
This fix is based on storing the location URL object we are loading the
configuration for in the redux store. Once the config has been loaded (or it has
failed, for that matter!) we'll check if the current "config URL" is the same we
set, and discard the old one if they don't match.
With some of the preceding commits in the "multiplying remote
thumbnails" story line, I started hitting this error with 100%
reproducibility:
1. Have a remote participant prepared in conferenceA. Web will do as
well.
2. On iOS prepare to join conferenceB in Safari and use the same device
for step 3.
3. Join conferenceA on the iOS device from step 2 with audio-only. The
audio-only is so that avatars are always visible. Wait for the remote
participant prepared in step 1 to appear.
4. Switch to Safari and hit "Continue in the app" to have the app leave
conferenceA and join conferenceB.
What happens:
After the iOS device joins conferenceB in the Jitsi Meet app, the local
participant is on the large video (as expected) but the avatar of the
local participant is the default audo-generated auto-colored
placeholder. That's because this error was hit and the avatar couldn't
be "fetched".
The Jitsi Meet app always has at most 1 conference of primary interest.
It may have to juggle with 2 JitsiConference instances at the same time
if 1 is in the process of being left and one is joining/joined. But the
one which is joining or joined (which we call conference in the
features/base/conference redux state) is the one "of interest", the
other one is "clean up". Consequently, the remote participants of the
conference "of interest" are the remote participants "of interest" and
the others are "clean up". In order to reduce the time during which
there may be multiplying remote thumbnails, clean the remote
participants who are no longer "of interest" up.
As part of the work on fixing the problem with the multiplying
thumbnails, we've associated remote participant w/ JitsiConference.
However, there are periods of time when multiple JitsiConferences are in
the redux state (and that period is going to be shorted by
StateListenerRegistry). In order to give more control to the feature
base/participants, reduce the occurrences of direct access to the
features/base/participants redux state and utilize the feature's
existing read access functions. Which will allow us in the future to
enhance these functions to access participants which are relevant to the
current conference of interest to the user only.
The commit message of "Associate remote participant w/ JitsiConference
(_JOINED)" explains the motivation for this commit.
Practically, _JOINED and _LEFT combined with "Remove remote participants
who are no longer of interest" should alleviate the problem with
multiplying remote participants to an acceptable level of annoyance.
Technically though, a remote participant cannot be identified by an ID
only. The ID is (somewhat) "unique" in the context of a single
JitsiConference instance. So in order to not have to scratch our heads
over an obscure corner, racing case, it's better to always identify
remote participants by the pair id-conference. Unfortunately, that's a
bit of a high order given the existing source code. So I've implemented
the cases which are the easiest so that new source code written with
participantUpdated is more likely to identify a remote participant with
the pair id-conference.
Additionally, the commit "Reduce direct read access to the
features/base/participants redux state" brings more control back to the
functions of the feature base/participants so that one day we can (if we
choose to) do something like, for example:
If getParticipants is called with a conference, it returns the
participants from features/base/participants who are associated with the
specified conference. If no conference is specified in the function
call, then default to the conference which is the primary focus of the
app at the time of the function call. Added to the above, this should
allow us to further reduce the cases in which we're identifying remote
participants by id only and get us even closer to a more "predictable"
behavior in corner, racing cases.
The plan set in motion here is to associate remote participants with the
JitsiConference instances that created them in order to be able to
remove remote participants when a JitsiConference is no longer the
primary focus of the jitsi-meet app. And that's supposed to alleviate a
problem with multiplying remote thumbnails.
Doing all of the above in a single commit is a bit of a high order. So
I'm splitting the whole into multiple successive commits for the
purposes of observability, comprehension. Each commit is supposed to be
safe even if subsequent commits are not accepted, are reverted,
whatever. Obviously, without the successive commits, a commit may be
"unused".
One of the important pieces of the multiplying remote thumbnails "fix"
offered is removing remote participants who are no longer of interest
i.e. PARTICIPANT_LEFT. But in order for _LEFT to be implemented, _JOINED
must be implemented first.
Because a conference can fail before or after it's joined it must be
"left" in order to release any allocated resources like peerconnections,
tracks and all the other things.
- add 10px of padding on the sizes of the toolbar
- make the button margin smaller (from 10 to 7)
- increate the secondary button factor to 85%, thus rising the maximum secondary
button size to 50 (from the previous 48)
Doing so in CONFERENCE_JOINED is too late because if we are moderators that
event will come first and we won't know what ID to match it with.
This is safe because our local ID is created early.
* feat(recording): frontend logic can support live streaming and recording
Instead of either live streaming or recording, now both can live together. The
changes to facilitate such include the following:
- Killing the state storing in Recording.js. Instead state is stored in the lib
and updated in redux for labels to display the necessary state updates.
- Creating a new container, Labels, for recording labels. Previously labels were
manually created and positioned. The container can create a reasonable number
of labels and only the container itself needs to be positioned with CSS. The
VideoQualityLabel has been shoved into the container as well because it moves
along with the recording labels.
- The action for updating recording state has been modified to enable updating
an array of recording sessions to support having multiple sessions.
- Confirmation dialogs for stopping and starting a file recording session have
been created, as they previously were jquery modals opened by Recording.js.
- Toolbox.web displays live streaming and recording buttons based on
configuration instead of recording availability.
- VideoQualityLabel and RecordingLabel have been simplified to remove any
positioning logic, as the Labels container handles such.
- Previous recording state update logic has been moved into the RecordingLabel
component. Each RecordingLabel is in charge of displaying state for a
recording session. The display UX has been left alone.
- Sipgw availability is no longer broadcast so remove logic depending on its
state. Some moving around of code was necessary to get around linting errors
about the existing code being too deeply nested (even though I didn't touch
it).
* work around lib-jitsi-meet circular dependency issues
* refactor labels to use html base
* pass in translation keys to video quality label
* add video quality classnames for torture tests
* break up, rearrange recorder session update listener
* add comment about disabling startup resize animation
* rename session to sessionData
* chore(deps): update to latest lib for recording changes
Contributing all buttons in one place goes against the designs that we
set out at the beginning of the project's rewrite and that multiple of
us have been following since then.
Currently the following are implemented:
- AudioMuteButton
- HangupButton
- VideoMuteButton
In order to implement these new buttons a new abstract class was introduced,
which abstracts the ToolboxItem into a button with enough hooks so a stateful
and a stateless version of it can be created.
This patch only adds the stateful implementation of the aforementioned buttons.
This abstraction represents an action which can go anywhere in a toolbox (be
that the main toolbar or the overflow menu) and it's platform independent.
It does not depend on Redux, thus making it stateless, which facilitates its use
in stateful button implementations as well as stateless ones.
Knowledge is power, man!
The config.js cache predates the feature base/known-domains.
Technically, it's also able to recall more domains that the feature
recent-list can (because the latter limits its entries).
Knowledge is power, man!
We moved "knownDomains" from calendar-sync to base/known-domains.
However, we do have an official release in the app stores and I'd like
us to not throw away the knowledge it has acquired.
If multiple JitsiMeetView instances are created (not necessarily
existing at once), it's possible to hit a TypeError when reading the
React Component props of the currently mounted App. Anyway, in certain
places we're already protecting against that out of abundance of caution
so it makes no sense to not protect everywhere.
Make it more generic by accepting any content except of just rows with text and
icons.
In addition, rework its structure so the animation is smoother, by putting the
background overlay outside of the Modal. This way, the animation doesn't affect
the background, which won't slide down.
* fix(toolbar): make button hover bigger
* fix(toolbar): make hangup button bigger
* fix(always-on-top): make toolbar and buttons same sizes as main toolbar
* fix(toolbar): change some tooltips
* fix(toolbar): adjust side panel and filmstrip for new toolbar sizes
It seems that the external API will not send any event to let the sdk
consumer know that the conference has failed if the problem occurs at
the establishing of XMPP connection stage. That's because the config was
loaded successfully, but the conference instance does not exist yet, so
neither base/config nor base/conference will emit any failure.
Make the external API emit CONFERENCE_WILL_JOIN early on SET_ROOM action
which occurs before the XMPP connection is created. At this point we
know that config has loaded and if there's a valid conference room to
be joined. We were thinking of doing that even on CONFIG_WILL_LOAD,
but that seemed to be to risky at this point.
With this the RN component and the consumer app can share same CallKit
provider, configuration, and enable to be part of multiple listeners of
the CallKit flow events. The main driver of this is to enable the
consumer app to be able to report an incoming call to the OS before
loading the JitsiMeetView. Once the user answers the call, the app can
instantiate a JitsiMeetView, pass the CallKit call UUIID, and the Jitsi
Meet components will handle the connection and report back to CallKit
that the call has been established.
Hristo Terezov, Chris Cordle, and I/Lyubomir Marinov agreed that we'd
try to use "invite" & "invitee(s)" in Web/React's iframe API,
mobile/react-native's SDK invite API, and internally for the purposes of
consistency, ease of understanding, etc.
This can happen if there are multiple JitsiMeetView instances are active at the
same time, because there is a single bridge, which means all of them would get
the events.
Currently enterPictureInPicture action can only be dispatched when
the app is on the conference view and the enter PiP button is displayed,
so no check should be necessary.
Activity.enterPictureInPictureMode method must be invoked synchronously
on userLeaveHint callback in order to be sure that the current Activity
is still visible (does not transit to PAUSED state). Previously if the
asynchronous processing would be delayed enough for the Activity to go
into the PAUSED state it will be too late to go into the PiP mode.
To reduce the amount of motion that has to be blurred, use a canvas
to essentially set the FPS of the video background. This canvas
component is behind a temporary feature flag, as well as being able
to disable the blur, so it can be played around with on deployed
environments.
- Update font files to add new icon.
- Update markup and style so the icon has a small background
to fill in the text of the icon.
- Remove some css transitions that don't seem to do much.
In order to be able to add analytics to the deep-linking pages the
lib-jitsi-meet initialization has been moved so it happens earlier.
The introduced `initPromise` will eventually disappear, once conference is
migrated into React and / or support for Temasys is dropped. At that stage, it
can be turned into a sync function which all platforms share.
* Button conditionally shown based on if the feature is enabled and available
* Hooks for launching the invite UI (delegates to the native layer)
* Hooks for using the search and dial out checks from the native layer (calls back into JS)
* Hooks for handling sending invites and passing any failures back to the native layer
* Android and iOS handling for those hooks
Author: Ryan Peck <rpeck@atlassian.com>
Author: Eric Brynsvold <ebrynsvold@atlassian.com>
* Adds in memory log storage, to be used while testing.
Enabling it only when config.debug is set, a configuration provided by jitsi-meet-torture.
* Moves to using config.testing.testMode property for logs storage.
* Fixes comments.
Activity.enterPictureInPictureMode can fail for a couple of reasons
mentioned in the JSDoc:
"The system may disallow entering picture-in-picture in various cases,
including when the activity is not visible, if the screen is locked or
if the user has an activity pinned."
It seems to be safe to assume that those cases will be caught by
a RuntimeException handler (only RuntimeExceptions can be left without
explicit catch block).
Anyway the root cause for problems is the fact that the current process
for going to the picture in picture mode is not synchronised with
Activity's lifecycle. On Activity's "userLeaveHint" callback we dispatch
async task to the JS code which only then after dispatching some more
stuff eventually call native method that enter PiP. In case we spend too
much time on the JS side and the Activity goes to PAUSED state the call
will fail with IllegalStatException: "activity is not visible",
"activity is paused" etc. This means with this fix the app will not
crash, but we'll see it sometimes not go to the PiP mode as expected.
* feat(recording): show the YouTube live stream URL
- From the start live stream dialog, push up the broadcast ID
of the chosen broadcast. It is assumed the ID can be used to
create the YouTube link.
- Listen for lib-jitsi-meet to emit updates of the known live
stream URL, shove it into redux, and have InfoDialog display
it.
* ref(info): pass in dial in and live stream url
Passing these values in should trigger AtlasKit InlineDialog
to re-render and reposition itself.
* ref(info): use conference existence as trigger for autoshowing dialog
* feat(info): add live stream link to invite copy
* Revert "ref(info): use conference existence as trigger for autoshowing dialog"
This reverts commit 1072102267.
* hidden -> url
* _onClickHiddenURL -> _onClickURLText
Since the main conference container is no longer "clickable" there must
be a way for clicking on the "large video". A clickable TestHint nested
in ParticipantView makes it easier for dealing with the fact that the
click handler is not always on the same component (required for the
pinch and zoom feature to work correctly).
Allows to bind a click handler to a TestHint.
When a mobile test wants to click an UI element it must be able to
locate it through the accessibility layer. Now the problem with that is
that there is currently no uniform way for finding element on both iOS
and Android. This problem is solved by TestHint component which takes
an id parameter which then can be specified in the corresponding java
TestHint class in jitsi-meet-torture to easily find it. By being able to
add a click handler to a TestHint, it's possible to duplicate original
handler under nested TestHint and then find it easily on the torture
side.
Adds the logic to render TestHint only when the test mode is enabled
in order to be able to put independent TestHints in other places than
the TestConnectionInfo component.
Be explciit about the appearance we desire, since each mounted StaturBar
component will override the existing values. In this case, the problem was
caused because the default on iOS is dark, whereas it's light on Android.
Set it to light so it works consistently across both, which is what we want.
It's too sensitive and most of the time I cannot perform an onPress. In
contrast, the builtin/default/standard onPress is noticeably more
forgiving. While we fix the sensitivity of "pinch to zoom", don't use
its onPress unless absolutely necessary i.e. use it only for desktop
streams.
Zoltan Bettenbuk suggested the following:
const state = getState();
if (desiredTypes.length === 0) {
- const { audio, video } = state['features/base/media'];
-
- audio.muted || desiredTypes.push(MEDIA_TYPE.AUDIO);
- video.muted || desiredTypes.push(MEDIA_TYPE.VIDEO);
+ const startAudioOnly = getPropertyValue(state, 'startAudioOnly');
+ const startWithAudioMuted
+ = getPropertyValue(state, 'startWithAudioMuted');
+ const startWithVideoMuted
+ = getPropertyValue(state, 'startWithVideoMuted');
+
+ if (!startWithAudioMuted) {
+ desiredTypes.push(MEDIA_TYPE.AUDIO);
+ }
+ if (!startAudioOnly && !startWithVideoMuted) {
+ desiredTypes.push(MEDIA_TYPE.VIDEO);
+ }
}
const availableTypes
The final commit is really a different implementation of the same idea
but takes into account that the state of base/media already contains the
intent of the URL and notices the delay in the realization of the
background app state.
Additionally, unbreaks one more case where setAudioOnly is incorrectly
dispatched on CONFERENCE_LEFT or CONFERENCE_FAILED and, consequently,
overrides the intent of the URL.
* feat(Deeplinking): Implement for web.
* ref(unsupported_browser): Move the mobile version to deeplinking feature
* feat(deeplinking_mobile): Redesign.
* fix(deeplinking): Use interface.NATIVE_APP_NAME.
* feat(dial_in_summary): Add the PIN to the number link.
* fix(deep_linking): Handle use case when there isn't deep linking image.
* fix(deep_linking): css
* fix(deep_linking): deeplink -> "deep linking"
* fix(deeplinking_css): Remove position: fixed
* docs(deeplinking): Add comment for the openWebApp action.
* fix(recording): fetch events also for available broadcasts
Only "persistent" broadcasts were being fetched using the
YouTube API. Fetching "all" will get persistent broadcasts
and events. If events use a custom encoder then the stream
key can be obtained. If google hangouts is used for the event
then a stream key will not be obtainable; in those cases
input empty string as the stream key.
* squash: fix typos, reword comments, use object for preventing duplicate broadcasts
The feature was not ported to the new toolbar. Arguable these
can all be moved into notification but for now simply the
logic will be removed and worked on again as demand arised.
Adds TestConnectionInfo component which exposes some internal app state
to the jitsi-meet-torture through the UI accessibility layer. This
component will render only if config.testing.testMode is set to true.
Moves the statsEmitter.start() invocation to the middleware of
the connection-indicator feature, so that it's started for both mobile
and web (now mobile needs RTP stats for the tests).
On Android the files will be copied to the assets/sounds directory of
the SDK bundle on build time. To play the "asset:/" prefix has to be
used to locate the files correctly.
On iOS each sound file must be added to the SDK's Xcode project in order
to be bundled correctly. To playback we need to know the path of the SDK
bundle which is now exposed by the AppInfo iOS module.
TouchableWithoutFeedback and TouchableHighlight interfere with the
implementation of 'pinch to zoom' to come. We prepare for it by driving
the onClick/onPress handler(s) out of Conference, through LargeVideo and
ParticipantView into Video itself where the bulk of 'pinch to zoom' will
be implemented.
In preparation for "pinch to zoom" support in desktop streams on mobile, make
certain Views not intervene in touch event handling. While the modification is
necessary for "pinch to zoom" which is coming later, it really makes sense for
the modified Views to not be involved in touching because they're used to aid
layout and/or animations and are to behave to the user as if they're not there.
Adds Nat64InfoModule which resolves IPv6 addresses for IPv4 addresses
in IPv6 only network where jitsi-meet deployment does not provide any
IPv6 addresses as ICE candidates.
Being kicked out of the conference will result with a conference failed
event with 'conference.kicked' reason and take the user back to
the welcome page by navigating to 'undefined'.
I don't understand the old showDesktopSharingButton action
but I've tried my best to copy it over. There is an existing
issue where the keyboard shortcut gets registered when it
probably shouldn't because screensharing is disabled. It will
be fixed soon with refactoring of the entire logic determining
whether or not to show the screensharing button.
The onPresence parsing was refactored to remove use of jQuery.
This exposed three methods not available in react-native:
ParentNode.children, ChildNode.remove, and
document.querySelectorAll. The querySelectorAll change could
be swapped for the already polyfilled querySelector, but
children and remove had to be added. The polyfills are based
on those supplied by MDN web docs, but modified to pass jitsi
linting.
* fix(invite): do not send empty queries for people search
The endpoint might return an error if an empty query is sent.
* fix(invite): add error logging for failed people directory requests
The error currently being passed through from $.getJSON ended up
being an empty string plus was not getting logged. So switch to
fetch to move along with jquery killing and log the error.
* fix(dial-in): add error logging for failed requests
* ref(invite): create a fetch helper to remove duplicate logic
* feat(invite): add basic analytics for AddPeople dialog
Analytics for opening the dialog, closing the dialog, the
count of invites sent, and the count of invites errored.
* squash: fix typo, change default count init, remove extra analytics param
* feat(recording): use google api to get stream key
* squash: renaming pass
* squash: return full load promise
* sqush: use google api state enum
* squash: workaround for lib not loading
* another new design...
* increase timeout workaround for gapi load issue
* styling pass
* tweak copy
* squash: auto select first broadcast
Moves the things around to be able to override the config with the URL
params specified in the hash part of the location URI to which the app
is navigating to.
Adds base/sounds feature which allows other features to register a sound
source under specified id. A new SoundsCollection component will then
render corresponding HTMLAudioElement for each such sound. Once "setRef"
callback is called by the HTMLAudioElement, this element will be added
to the Redux store. When that happens sound can be played through the
new 'playSound' action which will call play() method on the stored
HTMLAudioElement instance.
Pre-existing logic made it so numbers were assumed as valid
if no validation url was specified. To be consistent with
the validation server, the faked number should include a
+ at the beginning.
* feat(invite): be able to call numbers from the invite dialog
The major changes:
- Remove DialOutDialog, its views, redux hooks, css, and images.
Its main functionality has been moved into AddPeopleDialog.
- Modify the AppPeopleDialog styling a bit so it is wider.
- Add phone numbers to AddPeopleDialog search results. Phone
numbers are validated in parallel with the request for people
and then appended to the result. The validation includes
an ajax to validate the number is recognized as dialable by
the server. The trigger for the validation is essentially if
the entered input is numbers only.
- AddPeopleDialog holds onto the full object representation of
an item selected in MultiSelectAutocomplete. This is so
selected items can be removed on successful invite, leaving
only unsuccessful items.
- More granular error handling on invite so individual invitees
can be removed from the selected items list.
* squash: change load state, new regex for numbers
* squash: change strings, auto prepend 1 if no country code, add reminders
* deps: update jquery version
* squash: resize thumbnails after appending shared thumb
This forces jquery animate to show the thumbnail somehow...
Remote thumbnails basically work this way (append to filmstrip
and then resize filmstrip thumbnails) so I just copied that
implementation. ... So I admit I lost this fight because
even after looking at jquery I couldn't understand why
it doesn't work on the first resize but does on the second.
Plus I'm being put on a strict timebox to update jquery.
* squash: getJSON no longer supports .success
The difference from this change and 88325ae is there is no
attempt to do this in redux. This is the safer change in that
the cleanup logic is known only to trigger on hangup.
This reverts commit 88325aeef2.
Turns out a conference with a password triggers a failed conference
join. It's going to be tricky to decipher when to do actual
cleanup, and where to shove that code, so reverting is easier for
now.
Recent changes in lib-jitsi-meet probably led to (1) our
RTCPeerConnection customizations on react-native not being used which is
a problem because we need them for at least NAT64 on iOS in order to
pass the review in Apple's App Store and (2) unexpected exceptions
inside react-native-webrtc.
The Promise-based WebRTC API should be merged from react-native-webrtc's
upstream but I don't want to do it right now because last time we got
multiple bugs in addition.
Destroy local tracks and also destroy large video so the
user does not wonder why camera (and mic) are still enabled
even though hangup has been pressed.
This only works automatically on Android >= 8. On other platforms / versions, it
relies on the SDK user on implementing a "reduced UI" mode and reacting to the
"request PIP" delegate method.
- Move the existing components for the static dial in page into
a separate folder for easier reuse.
- Reuse those components for displaying dial-on numbers on the
mobile page for unsupported browsers.
- Modify those components to support having tel protocol
links on the dial-in numbers.
- Have DialInSummary, formerly DialInInfoPage, respect a
passed in className prop for easier styling differences.
* ref(invite): remove InviteDialog
InviteDialog functionality has been moved into InfoDialog.
The InviteButton has been temporarily hacked to show one
of its dropdown options instead as the button. Future
work will bring in a redesigned InviteModal that the button
will open.
* squash: filter invalid options and map valid options
* squash: update strings
On Android we go into "immersive mode" when in a conference, this is our way of
being full-creen. There are occasions, however, in which Android takes us out of
immerfive mode without us (the application / SDK) knowing: when a child activity
is started, a modal window shown, etc.
In order to be resilient to any possible change in the immersive mode, register
a listener which will be called when Android changes it, so we can re-eavluate
if we need it and thus re-enable it.
* feat(info): new dialog design
- Add display of a dial in number.
- Add a static page to show a full list of dial in numbers.
- Add password management.
- Invite modal will be changed soon to remove password and
dial-in.
* squash: add classes for torture tests
* squash: class for local lock for torture tests
* squash: more classes for torture tests
* squash: more classes, work around linter
* squash: remove unused string?
* squash: work around linter and avoid react warnings
* squash: pixel push, add bold
* squash: font size bump
* squash: NumbersTable -> NumbersList
* squash: document response from fetching numbers
* squash: showEdit -> editEnabled, pixel push padding for alignment
* squash: pin -> conferenceID
* squash: prepare to receive defaultCountry from api
When in PiP mode the LargeView will not be large enough to hold the avatar (for
those interested in the details, our avatar's size is 200, and in PiP mode the
app is resized to about 150).
In order to solve it, this PR refactors how the avatar style is passed along,
reducing it to a single "size" prop. With this only prop, the Avatar compononent
will compute the width, height and borderRadius, plus deal with some Android
shenanigans.
In addition, the LargeView component now uses DimensionsDetector to check its
own size and adjust the size prop passed to the Avatar component as needed.
* ref(large-video): reactify background
This is pre-requisite work for disabling the background on
certain browsers, namely Firefox. By moving the component
to react, and in general encapsulating background logic,
selectively disabling the background will be easier.
The component was left for LargeVideo to update so it can
continue to coordinate update timing with the actual large
video display. If the background were moved completely into
react and redux with LargeVideo, then background updates would
occur before large video updates causing visual jank.
* fix(large-video): do not show background for Firefox and temasys
Firefox has performance issues with adding filter effects on
animated elements. On temasys, the background videos weren't
really displaying anyway.
* some props refactoring
Instead of passing in classes to LargeVideoBackground, rely on
explicit props. At some point LargeVideo will have to be reactified
and the relationsihp between it and LargeVideoBackground might
change, so for now make use of props to be explicit about
how LargeVideoBackground can be modified.
Also, set the jitsiTrack to display on LargeVideoBackground to
null if the background is not displayed. This was an existing
optimization, although previously done with pausing and playing.
* squash: use newly exposed RTCBrowserType
* squash: rebase and use new lib browser util
* squash: move hiding logic all into LargeVideo
* squash: remove hiding of background on stream change. hopefully doesnt break anything
Passing around of the component was used when there were two
independent Notification components. Now that there is only
one Notification component, it is not necessary to pass
around the component.
This is only implemented for mobile at the moment, since web doesn't handle
visibility within the Filmstrip component yet, so this should be added right
then, too.
* Handles connection failed event details (passing them to analytics).
* Fixing comments.
* Updates depending versions to be able to test.
* Fixing comments.
* Fixes wrong jsdoc.
We started on the way to responsive UI and its design with aspect ratio
and keeping the filmstrip on the short side of the app's visible
rectangle.
Shortly, we're going to introduce reduced UI for Picture-in-Picture. And
that's where we'll need another dimensions-based detector akin to the
aspect ratio detector.
While the AspectRatioDetector, the up-and-coming ReducedUIDetector, and
their base DimensionsDetector are definitely separate abstractions and
implementations not mixed for the purposes of easy extensibility and
maintenance, the three of them are our building blocks on top of which
we'll build our responsive UI.
Turns out this was a bit more involved than I originally thought due to an
interesting (corner) case: IFF the user was never asked about microphone
permissions and the call starts with audio muted, unmuting from the CallKit
interface won't work (iOS won't show the prompt, it fails immediately) and we
need to sync the mute state back.
If the view gets resized to a 1:1 aspect ratio, remember the previous mode to
avoid flickering when going back to a larger size or different aspect ratio.
If config.enableUserRolesBasedOnToken is true, only let moderators
and non-guests modify the password. Otherwise, only let moderators
edit the password.
Spot will need a way to submit call feedback using the iframe
api. For now expose a method on conference.js to submit that
feedback. Exposing on conference.js looks to be the existing
pattern... Also add an event to notify consumers of the iframe
api that feedback was submitted, as postMessage is async
and the notification can at least give some guarantee maybe.
I haven't updated documentation yet as I'm not confident
about this api.
Improve the experience when joining a room by removing the need to tap the join
button. The keyboard type has also been set to "go", which translated on the
builtin keyboard button label to be "go" (it's builtin, the operating system
translates it). This works on both Android and iOS.
Android uses a SurfaceView to render video, which is not quite a View, so the
fade-in animation (which varies the opacity) doesn't work.
Instead, add an opaque black view covering the video, which transitions to
transparent. This creates much smoother transitions on Android, while behaving
the same.
In addition, I removed the flip animation for local tracks, which is no longer
used, since the camera is switched without changing tracks.
* ref: Restructures the pinned/unpinned events.
* ref: Refactors the "audio only disabled" event.
* ref: Refactors the "stream switch delay" event.
* ref: Refactors the "select participant failed" event.
* ref: Refactors the "initially muted" events.
* ref: Refactors the screen sharing started/stopped events.
* ref: Restructures the "device list changed" events.
* ref: Restructures the "shared video" events.
* ref: Restructures the "start muted" events.
* ref: Restructures the "start audio only" event.
* ref: Restructures the "sync track state" event.
* ref: Restructures the "callkit" events.
* ref: Restructures the "replace track".
* ref: Restructures keyboard shortcuts events.
* ref: Restructures most of the toolbar events.
* ref: Refactors the API events.
* ref: Restructures the video quality, profile button and invite dialog events.
* ref: Refactors the "device changed" events.
* ref: Refactors the page reload event.
* ref: Removes an unused function.
* ref: Removes a method which is needlessly exposed under a different name.
* ref: Refactors the events from the remote video menu.
* ref: Refactors the events from the profile pane.
* ref: Restructures the recording-related events.
Removes events fired when recording with something other than jibri
(which isn't currently supported anyway).
* ref: Cleans up AnalyticsEvents.js.
* ref: Removes an unused function and adds documentation.
* feat: Adds events for all API calls.
* fix: Addresses feedback.
* fix: Brings back mistakenly removed code.
* fix: Simplifies code and fixes a bug in toggleFilmstrip
when the 'visible' parameter is defined.
* feat: Removes the resolution change application log.
* ref: Uses consistent naming for events' attributes.
Uses "_" as a separator instead of camel case or ".".
* ref: Don't add the user agent and conference name
as permanent properties. The library does this on its own now.
* ref: Adapts the GA handler to changes in lib-jitsi-meet.
* ref: Removes unused fields from the analytics handler initializaiton.
* ref: Renames the google analytics file and add docs.
* fix: Fixes the push-to-talk events and logs.
* npm: Updates lib-jitsi-meet to 515374c8d383cb17df8ed76427e6f0fb5ea6ff1e.
* fix: Fixes a recently introduced bug in the google analytics handler.
* ref: Uses "value" instead of "delay" since this is friendlier to GA.
There is more avatar work coming down the line for mobile,
which should also affect web, assuming the same getAvatarURL
helper will be used. As such, instead of continuing to
support the initials service and tweaking UI, revert to
make way for the future avatar work.
This reverts commit 2ea5ad68a5.
The inline classes for the toolbars were re-arranged
to fix non-rounded corners in the always-on-top window's
toolbar. However, those classes were also used by the
torture tests as a way to find stable elements that will
not get blown away by a react re-render. So re-wrap the
buttons with a div that will not get blown away,
add back the inline classes to those divs, and change
the CSS to round the corners in the always-on-top
window's toolbar.
* ref(avatars): remove Avatar.js
- Rely on redux getting updated with new participant state
and any calls to getAvatarURL passing in the redux
participant state. This way the state within Avatar.js can
be removed.
- Clean up methods on UI.js. Because all state is in the
store, separate methods for updating the avatar aren't as
necessary. Instead centralize accessing of the avatar for
components outside of redux and centralize the call to
update avatars for non-react components.
- Controversial: cache a participant's avatarURL on the
participant state. Currently the participant's avatarURL
that is generated without jwt (which sets the avatarURL directly)
is not cached. Without cache, there can be many redundant
calls to APP.API.notifyAvatarChanged.
* Leverage middleware timing to diff avatars
One alternative implementation is to leverage middleware's
ability to intercept updates before and after redux has
upated and then compare avatarURLs.
* kill UI.getAvatarUrl
* profile button sets its own avatar url (solves update timing)
* remove calls to updating avatar outside of middleware
* update UI.js doc
* remove left over logic from initial implementation
* try to move local user fallback into selector func
* default to id 'local' in selector
The video will switch to the avatar and be tinted with gray. On the large view,
a text message indicating the user has connectivity issues will be shown.
They will be stored in redux and the PageReloadOverlay will be displayed.
Note that this commit also introduces a subtle (and yet important!) change:
the location URL is now always set, regardless of the configuration loading or
not. This is needed in order for the retry logic to pick it up.
On web Conference is pretty much all there is, but on mobile we have the welcome
page and the blank page. If we fail to load config.js, for example we will still
be in the welcome page *and* we want to show an error overlay.
* Removes unused config logic.
* Whitelists config options that can be overridden using the URL.
* Recorder login with credentials, not supported by externalconnect.
Jibri uses xmpp credentials to login, which is not supported by externalconnect, so we want to skip it till that is supported.
* Whitelist only config.js
* Extracts whitelisting in separate function.
The goal is to reduce usage on atlassian/aui. New components
have been created to display the settings panel. Language
selection will reach into i18n for state whereas moderator
options will keep state in redux.
Properly handle errors while connecting or joining a conference. Prior to this
patch, only errors on established conferences / connections were saved to the
redux store.
75bf7638b3 introduced this regression, state must
be assigned as an object, even though one would think it's automagically
initialized to an object. Oh well!
AtlasKit is not fully compatible with React 16. One problem
is PropTypes will not be defined on the React object. So,
add the prop-types shim to the popup bundle.
Do the selection in mapStateToProps so the container itself doesn't need to
receive all the props that each overlay needs.
Each overlay is responsible for fetching their own props and for providing a
"needsDisplay" static method wich will be called with the full redux state and
should return true if the overlay needs displaying.
Also eliminate duplicated state keeping: the connection and conference error
states can be fetched from their respective base features.
Initializing UI features, like keyboard shortcuts, by chaining
onto APP.conference.init is not safe because init can fail,
skipping the initializing of UI features. This can happen when
the room is locked and then a failure event is dispatched into
middleware. I couldn't find a place to properly chain onto
in the APP.conference.init promise chain, primarily due
to the flow continued within middleware, so instead I
leveraged an existing listener for CONFERENCE_JOINED.
* Adds initial documentation for sipgw jibri.
Also explains enabling the people search service and the request/response that are made around sipgw jibri service.
* Fixes add people dialog to invite users and rooms.
No invitation is sent when there is nobody to invite.
* Reuse some recording strings, by using arguments.
* Make sure web also dispatches CONFERENCE_WILL_JOIN.
* Introduces new feature videosipgw.
* Fixes lint errors.
* Renames methods to use people, chatRooms and videoRooms.
* Updates to latest lib-jitsi-meet (dc3397b18b).
It was decided along with the mute participant dialog reactification
that these types of warning messages should not be toggleable--that
they should simply always display because there is no undo action.
As such, the component NotificationWithToggle is no longer needed.
* fix(notifications): throttle and batch join notifications
Instead of directly calling to show a join notification,
go through a specific method. This method will queue
names for display while a throttled function pulls
the names and shows a notification.
* squash: remove unused translation key
* squash: use default display name
* squash: move into participant actions
Rearrange the ToolbarButtons in the secondary Toolbar in order to mostly
group the media-related ones such as the AudioRouteButton, the
switchCamera button, and the audio-only mode button.
Due to the difference in nature, the iOS and Android implementations are
completely different:
iOS: MPVolumeView is used, which allows us to place a button which will launch a
native route picker provided by iOS itself. This view is different depending on
the iOS version, with the iOS 11 version being more complete.
Android: A completely custom component is used, which displays a bottom sheet
with the device categories, not devices individually. This is akin to the sheet
in the builtin dialer.
It emulates Android's BottomSheet in pure JavaScript. It's implemented as
another Dialog, so it can be used instead of one.
The implementation only supports text options with an associated icon, and an
optional 'selected' marker.
While reviewing "[PREVIEW|RN]: Handle getUserMedia in progress" I
discovered JSDoc comments which could be improved. They are not
necessarily 100% related to the PR.
This commit adds extra actions/Redux state to be able to deal with
the GUM operation being in progress. There will be early local track
stub in the Redux state for any a local track for which GUM has been
called, but not completed yet.
Local track is considered valid only after TRACK_ADDED event when it
will have JitsiLocalTrack instance set.
* feat(keyboard-shortcuts): show help in a react dialog
- Move shortcut help dom declaration to a react component
- Let open/close logic be handled by AtlasKit Dialog
- Remove static html for help from index.html
- Consolidate keyboard shortcut css
* squash: use lozenge for key styling
* squash: use different iteration style
* squash: update package-lock for lozenge
* feat(audio-only): be able to lock a browser into capturing audio only
* squash: try to make string more clear about audio only support
* squash: final strings
With the introduction of wide and narrow layouts the margins of the
Filmstrip and the Toolbox became inconsistent. For example, the
Filmstrip's top in the wide layout was nearer to the top than the
secondary Toolbar.
Adds the ability to detect app area's aspect ratio on react-native
through the features/base/aspect-ratio.
Makes conference, filmstrip and toolbox react to the aspect ratio
changes and display filmstrip on the shorter side of the screen.
* ref(notifications): convert some dialogs to error or warning notifications
- Expand the configurability of the Notification component so warnings
and errors can be displayed.
- Allow Notification to take in arbitrary text for the body.
- Rename defaultTitleKey to titleKey for consistency with descriptionKey.
* ref(notifications): remove openReportDialog method
openReportDialog is a wrapper around showError that adds
a logger statement. It is being called in one place only
so remove the method and have that one place call logger.
* ref(notifications): UI.showTrackNotWorkingDialog takes a boolean
Change UI.showTrackNotWorkingDialog so it takes a boolean
arguments instead of the entire track. A small refactor so
the method needs to know less.
* [squash] Fixes eslint errors
* WiP: Fixes desktop sharing error strings and adds support button
* [squash] Fix icons appearances
* [squash] Fix translate titles and messages
* [squash] fix(translation): Fixes incorrect password string
* [squash] fix(recording): Fixes recording message
* [squash] fix(warning): Turns some warnings to errors and makes support link optional.
* [squash] fix(translation): Addressing language comments
* [squash] Fixes jsdoc and formatting
* [squash] fix(noopener): Fixes window.open noopener
* [squash] fix(constants): Extract constants and refactor NotificationWithToggle
* [squash] fix(lang): Fixes camera and mic error titles
* [squash] fix(supportLink): Renames addSupportLink to hideErrorSupportLink
Instead of targetting a div that contains multiple elements
and risking the elements appearing out of order, create a
specific div for local video to append to.
The intention of the code is (1) to return target if none of the setters lead
to an actual change, (2) to not modify target, and (3) to do it with a 1
copyOnWrite at most.
The lib will accept new style constraints and use those
to capture audio/video. By defining the constraints in
config, there is greater flexibility for defining
and changing constraints.
The popovers in filmstrip only are displaying thinly.
As a quick workaround, set a width on them. There
should only be one anyway, which shows up when
talking while muted.
Triggering the 'conference left' action when the wait for owner dialog
is dismissed will let the Call Kit implementation end the call, after
a recoverable conference failed event was emitted.
Also fixes conference state reduction when 'conference left' is emitted
by room lock or auth features where the conference has not been joined
yet.
The feature authentication affords recovery from CONFERENCE_FAILED
caused by AUTHENTICATION_REQUIRED. (Like the feature room-lock afforded
recovery from CONFERENCE_FAILED caused by PASSWORD_REQUIRED.)
Recently/as part of the work on taking into account the user defined by
JWT, the local participant (on mobile) started telling the remote
participants that he/she had the display name "me". Obviously, that's
incorrect. Do not store the default display name in redux. While it may
be argues that redux is the place for all states, base/participants and
the name property of Participant is not meant to be that display name
because that is being sent to remote participants, the default name
needs to be internationalized, etc. So it's better to not store the
default display name at this time at all because it's not used by mobile
anyway and Web already deals with remote participants who don't share
their display names.
Will override email, display name and avatar URL with the values
provided in 'context.user' structure of the JWT token.
Settings will no longer be used to retrieve local display name,
email and avatar URL. Now those values will be obtained from
the /features/base/participants Redux state.
fix(jwt/middleware): use const for default name
fix: wrong default display name on web
ref(base/participants): remove getDisplayName functions
ref(jwt): do not accept unknown user fields
Instead of assuming the initial info dialog open should auto
close, explicitly call opening of the dialog with a flag for
auto closing. This better facilitates the auto close timeout
being set at any time.
The changes led to refactoring out state in the InfoDialogButton
in preference for always clearing the timeout instead of
first checking for interaction before clearing.
Delay showing the dialog until after joining the conference
instead of as soon as possible. This resolves a few issues.
One is the dialog displaying right before the permissions
overlay is shown. Another is that logically it does not
make sense to show the invite options when unable to invite.
It also sidesteps the initial react UI bootstrapping that
can cause race conditions with toolbar re-renders causing
misalignment. Lastly, it prepares prematurely for what I
assume will be changes for when the info dialog will
actually be shown automatically.
When _setLoggingConfig is invoked for the first time old and new config
are equal and _initLogging is not called. Currently, there is no way to
detect when the first time we call it is. We could use APP.logCollector
but it should go away at some point in the future.
Never show the local participant in the large view unless it's the only
participant.
This fixes 2 issues:
- selecting the local participant when the camera permission wasn't granted
- selecting the other participant when they join a 1-1 call with video muted
* WiP(invite-ui): Initial move of invite UI to invite button
* Adjusts styling to fit both horizontal and vertical filmstrip
* Removes comment and functions not needed
* [squash] Addressing various review comments
* [squash] Move invite options to a separate config
* [squash] Adjust invite button styles until we fix the whole UI theme
* [squash] Fix the remote videos scroll
* [squash]:Do not show popup menu when 1 option is available
* [squash]: Disable the invite button in filmstrip mode
* feat(connection-indicator): implement automatic hiding on good connection (#2009)
* ref(connection-stats): use PropTypes package
* feat(connection-stats): display a summary of the connection quality
* feat(connection-indicator): show empty bars for interrupted connection
* feat(connection-indicator): change background color based on status
* feat(connection-indicator): implement automatic hiding on good connection
* fix(connection-indicator): explicitly set font size
Currently non-react code will set an icon size on ConnectionIndicator.
This doesn't work on initial call join in vertical filmstrip after
some changes to support hiding the indicator. The chosen fix is
passing in the icon size to mirror what would happe with full
filmstrip reactification.
* ref(connection-stats): rename statuses
* feat(connection-indicator): make hiding behavior configurable
The original implementation made the auto hiding of the indicator
configured in interfaceConfig.
* fix(connection-indicator): readd class expected by torture tests
* fix(connection-indicator): change connection quality display styling
Bold the connection summary in the stats popover so it stands out.
Change the summaries so there are only three--strong, nonoptimal,
poor.
* fix(connection-indicator): gray background on lost connection
* feat(icons): add new gsm bars icon
* feat(connection-indicator): use new 3-bar icon
* ref(icons): remove icon-connection and icon-connection-lost
Both have been replaced by icon-gsm-bars so they are not
being referenced anymore. Mobile looks to have connect-lost
as a separate icon in font-icons/jitsi.json.
* fix(defaultToolbarButtons): Fixes unresolved InfoDialogButton component problem
* [squash]: Makes invite button fit the container
* [squash]:Addressing invite truncate, remote menu position and comment
* [squash]:Fix z-index in horizontal mode, z-index in lonely call
* [squash]: Fix filmstripOnly property, remove important from css
ESLint 4.8.0 discovers a lot of error related to formatting. While I
tried to fix as many of them as possible, a portion of them actually go
against our coding style. In such a case, I've disabled the indent rule
which effectively leaves it as it was before ESLint 4.8.0.
Additionally, remove jshint because it's becoming a nuisance with its
lack of understanding of ES2015+.
* Javadoc introduced @code as a replacement of <code> and <tt> which is
better aligned with other javadoc tags such as @link. Use it in the
Java source code. If we switch to Kotlin, then we'll definitely use
Markdown.
* There are more uses of @code in the JavaScript source code than <tt>
so use @code for the sake of consistency. Eventually, I'd rather we
switch to Markdown because it's easier on my eyes.
* Xcode is plain confused by @code and @link. The Internet says that
Xcode supports the backquote character to denote the beginning and end
of a string of characters which should be formatted for display as
code but it doesn't work for me. <tt> is not rendered at all. So use
the backquote which is rendered itself. Hopefully, if we switch to
Markdown, then it'll be common between JavaScript and Objective-C
source code.
This is more of a principle change than a necessary one.
In lib-jitsi-meet, when a getStats call finishes, the
stats are processed and first emitted (and received by
jitsi-meet) and then processed again for sending to
remote participants. Modifying the stats in place changes
the structure of stats before the second processing,
which maybe be unexpected.
* ref(info): be able to open dialog through store
* feat(info): automatically show the info dialog
Conditions:
- Lonely call
- Has not opened the info dialog yet
* squash: change to show on start, hide later
* squash: update naming and comment
* ref(contact-list): remove invite functionality
Removing becuase there is already a toolbar button dedicated
to opening the invite dialog. Now the contact list focuses
on showing current participants.
* squash: remove unused strings and styling
* squash: add plural to panel title
This commit adds initial support for CallKit on supported platforms: iOS >= 10.
Since the call flow in Jitsi Meet is basically making outgoing calls, only
outgoing call support is currently handled via CallKit.
Features:
- "Green bar" when in a call.
- Native CallKit view when tapping on the call label on the lock screen.
- Support for audio muting from the native CallKit view.
- Support for recent calls (audio-only calls logged as Audio calls, others show
as Video calls).
- Call display name is room name.
- Graceful downgrade on systems without CallKit support.
Limitations:
- Native CallKit view cannot be shown for audio-only calls (this is a CallKit
limitaion).
- The video button in the CallKit view will start a new video call to the same
room, and terminate the previous one.
- No support for call hold.
* ref(connection-stats): use PropTypes package
* feat(connection-stats): display a summary of the connection quality
* feat(connection-indicator): show empty bars for interrupted connection
* feat(connection-indicator): change background color based on status
* feat(connection-indicator): implement automatic hiding on good connection
* fix(connection-indicator): explicitly set font size
Currently non-react code will set an icon size on ConnectionIndicator.
This doesn't work on initial call join in vertical filmstrip after
some changes to support hiding the indicator. The chosen fix is
passing in the icon size to mirror what would happe with full
filmstrip reactification.
* ref(connection-stats): rename statuses
* feat(connection-indicator): make hiding behavior configurable
The original implementation made the auto hiding of the indicator
configured in interfaceConfig.
* fix(connection-indicator): readd class expected by torture tests
* fix(connection-indicator): change connection quality display styling
Bold the connection summary in the stats popover so it stands out.
Change the summaries so there are only three--strong, nonoptimal,
poor.
* fix(connection-indicator): gray background on lost connection
* feat(icons): add new gsm bars icon
* feat(connection-indicator): use new 3-bar icon
* ref(icons): remove icon-connection and icon-connection-lost
Both have been replaced by icon-gsm-bars so they are not
being referenced anymore. Mobile looks to have connect-lost
as a separate icon in font-icons/jitsi.json.
Gradually, we exploded the error of CONNECTION_FAILED in multiple
redux state properties. The explosion makes maintenance harder because
the properties have to be updated in sync. Collect them in an object
resembling an Error instance.
It is required to clear the flag, before the connection attempt.
Otherwise the app may confuse deployments without guest access with
a one with guess access if it was visited previously and
the WaitForOwnerDialog was canceled. That's because there will be no
conference related event that clears the flag.
* Implement disabling buttons (like Web had the ability).
* Use consistent colors (e.g. for the buttons) like the rest of the app
(e.g. WelcomePage).
* Enable AbstractDialog to await a thenable from onSubmit and Dialog to
render a LoadingIndicator in place of the OK/submit button text.
* feat(AddPeopleDialog): invite rooms
Distinguish between 'user' and 'videosipgw' search result items and
invite them with using different method.
* squash: fix typo in AddPeopleDialog.web.js
It will replace the "Join" text button while appNavigate lasts.
Note about the implementation: when appNavigate completes the component
may have been unmounted and thus we cannot touch its state. In order to
avoid this problem I added a 'mounted' instance variable which gets set
and reset in componentWillMount / Unmount respectively. This is to avoid
using isMounted, which is highly discouraged.
In order to support XMPP authentication, we'll need the message
accompanying the error and carried by lib-jitsi-meet's
CONFERENCE_FAILED in the redux store. We already carry the message in
the redux action and we've got the error in the redux store.
In order to accommodate the requirements of the work on supporting XMPP
authentication on mobile/react-native, make dealing with Dialog a
little more generic and a little easier.
Filmstrip only mode displays a device selection dialog that
does not have access to the redux/connect. However, the current
VideoTrack extends from AbstractVideoTrack, which assumes a
redux connection. The fix is to move video display logic into
a separate component and have device selection use that, while
the existing VideoTrack remains connected to redux but
uses the new video display component.
Instead of going through the Avatar object, call the getAvatarURL
directly so that the code flows consistently use the participant
representation within redux.
We broke external_api.min.js by importing react/features/util which
imported react/features/base/lib-jitsi-meet.
1. To reduce the risks of such a breakage until we add
external_api.min.js to the torture tests, import as little as
possible in modules/API/external/external_api.js.
2. Use the global JitsiMeetJS on Web in react/features/base/util.
The error is stored in the redux store in base/config so other components can
consult it. It is also broadcasted as a new event in the external API for the
SDK.
- Remove references to the model ContactList.
- Replace ContactListView with an empty element for attaching
the React Component ContactListPanel, which has the same
features as the old ContactListView.
- Create new selector for getting non-fake participants for
ContactListPanel's props.
- Create a ParticipantCounter component to place in the contact
list button. Previously ContactListView updated that but now
it's a react component hooked into the participant state.
- Remove pub/sub that was used only by ContactListView.
Implement a React Component which displays children as an overlay of
local video. The WelcomePage implemented such a component inside of it
among other WelcomePage-specific logic so I split
LocalVideoTrackUnderlay out of it. The new Component is used on the
BlankPage which may be displayed in the future not only when the
WelcomePage is disabled but also when there are long running network
requests, for example.
This only helps iff there is a short transient network error which prevents the
configuration from being loaded. In such case, use the cached version in
localStorage, which may not match the shard, but it's (probably!) better than
nothing.
In case there is no Internet connectivity, an error will be produced as soon as
the XMPP connection is attempted anyway.
Saúl Ibarra Corretgé
Emil Ivov
Jaya Allamsetty
tmoldovan8x8
Vlad Piersec
Bettenbuk Zoltan
Дамян Минков
Deepak Verma
Hristo Terezov
Gabriel Imre
marius-bardan
Mihai Uscat
Suguru Hirahara
nordlolek
Michael Telatynski
Felix C. Stegerman
msalmasi
NicolasD
Edgard Messias
Paweł Domas
ludovicm67
patidars
Jim Bullington
Ferdi Bayrak
adrmzz
James Baird
Joan Montané
Milan Kral
Ricardo Santana
Jonathan Scholz
yanas
Hanno Böck
Khatanbaatar
Marco Zehe
vp8x8
Tim Ruffing
Paul Mestrum
Michael Telatynski
Andrei Gavrilescu
bgrozev
Horatiu Muresan
Ruben Kerkhof
Juri
Tudor-Ovidiu Avram
Gabriel Imre
horymury
Vincent Hou
Leonard Kim
Andrei Gavrilescu
theunafraid
Jaya Allamsetty
virtuacoplenny
George Politis
Maximilian Ruta
Karthik Muralidharan
Matthias Herzog
Cristian Florin Ghita
netaskd
virtuacoplenny
Saúl Ibarra Corretgé
Damien Fetis
Aaron van Meerten
srmcgann
mmoanis
Lars Spaenij
Pratik Shah
Leonard Kim
Lyubo Marinov
linkmauve
Nik
Ritwik Heda
Radium Zheng
Nik
Praveen Gupta
Pablo Saavedra
bbaldino
Daniel Ornelas
Guus der Kinderen
Louis Chen
Ryan Peck