* Split and rewrite the preview window and canvas.
* Create a new class for handling the board information.
* Adds new render targets: openGL, legacy, and ray tracing.
* Render targets take full advantage of the new 3D plugins system and 3D cache
for a fast 3D model loading.
* Faster board loading.
* New OpenGL render is faster than the old one.
* New ray tracing render target with a post processing shader.
* Use of new 3D plugins (WRL, X3D, STEP and IGES) and 3D model caching.
* Preview of 3D model while browsing the file name.
* 3D preview of the footprint while adding / align 3D shapes.
* Render of 3D models according to attributes: Normal, Normal+Insert, Virtual.
* Pivot rotation centered in one point over the PCB board.
* Shortcuts keys improved for XYZ orientation..
* Animated camera.
* Add SCH_PLUGIN::Save() for current file format and code for saving all
SCH_XXX objects.
* Add function to SCH_FIELD to get the position of the field in the component
not the position added to the component position which is what GetPosition()
does. This was required because saving the component field expects position
of the field sans the position of the component.
* Remove public members from BITMAP_BASE object and fix all associated
code.
* Fix the never ending coding policy violations found making these changes.
* Factor out PROPERTIES object from the PCB plugin code and move it into
common so it can be used by both the Pcbnew and Eeschema plugins.
* Add schematic I/O plugin manager for loading and saving schematic and
component library files.
* Add initial attempt at a parser for current schematic file format. This
parser will be infinitely more strict than the current parser which is very
forgiving in what it parses.
* Make minor changes to the base bitmap class to support the new parser.
* Add find root sheet support to sheet object to allow fetching the root
sheet from any sheet in the stack.
It is especially true in some Window Managers like KDE, but can be true in any WM, when initializations are made by TransferDataToWindow() method, called by the default wxInitDialogEvent handler.
This feature was not reliably available: neither pl_editor nor GAL supported
it. It has been replaced over the past few commits with a new zoom-to-selection
tool available in all applications and modes.
* An assumption was made that wxDynamicLibrary.Load() would always result in
a wxLogSystemError on failure which was not always true. The code now throws
an exception which is caught by KiCad and an error message is displayed. In
the case where the wxLogSystemError is shown, there will be an annoying two
error messages but that is better than a crash.
Commit BZR 6703 introduced a minor horizontal adjustment for stroke
text rendering in GAL, but the Translate() call was done before
calling Save(). So, when this function was called multiple times a
residual offset carried over to each subsequent line.
bzr 6703 = git 67982a4
* move gerber_file_image_list class to a separate file
* better BestZoom calculation, and fix incorrect size of wxTextCtrl showing info about gerber file format.
* remove useless file and dead code. Remove not used parameters in some classes (mainly in class_gerber_draw_item)
This feature cannot work reliably for reasons explained in lp:1463505. Remove
the option on OS X builds and force cursor to the small one.
https://bugs.launchpad.net/kicad/+bug/1463505
> Bernhard Stegmaier (stegmaier) wrote on 2016-01-14:
>
> As far as I see from the code this is no bug but done on intention.
>
> The reason probably is that on OSX in the legacy canvas you don't have the
> XOR-drawing as on other platforms. To the best of my knowledge, this would
> mean that on every mouse move you would have to repaint the whole window just
> to get rid of the "old" cross.
>
> So, I would say this is a clear "won't fix".
> We could think of just removing/disabling the button in the legacy canvas.
Currently, kicad_pcb files have a (version ...) tag, but it is ignored. This
commit does the following:
1. Parse the version. If it's later than the last supported version, present an
alternative error message suggesting an upgrade if the file does not load
correctly. The version will be interpreted as an integer YYYYMMDD to suggest
a KiCad release date.
2. Accept a (version ...) tag also in kicad_mod files, but do not write them
yet. If no version tag is present in these files, assume the version to be that
of the current format version at the time of this commit.
This is meant to be merged to the 4.x stable series, and preps for KiCad 5
which will start emitting version tags also in footprints - users with what
will then be 'old stable' will not get a parse error when we introduce this for
footprints, and we can safely increment the format version later.
Fix erroneous optimization in VECTOR2<T>::Rotate (which was made for angles in degrees): Angles are in radians, and only 0 rd rotation is skipped ( case very frequent, especially in eeschema)
* Add event handler to check all button clicks for default command event
IDs and handle them appropriately by either calling EndQuasiModal() or
passing the event up the event handler chain to allow the default dialog
handlers to perform their magic.
* Add event handler to handle the close window event properly.
* Add scope brackets so the wxBusyCursor will stop being displayed when
the footprint library loading is complete in CvPcb.
* Remove the artificial footprint library read error limit to prevent
potentially readable libraries from being loaded after the error limit
is reached.
* Change error message dialog to an HTML dialog so that potentially large
error messages can be displayed with scrolling and the ability to copy
and paste the error message for bug reporting purposes.
* Add busy cursor when loading the footprint libraries so the user has some
idea that something is happening while the footprint libraries are being
loaded.
(In this case the schematic frame exists, but some members are not initialized as expected, and a crash happens when calling the schematic editor dtor)
Minor other fix: avoid multiple very similar strings to translate in 3d_filename_resolver.cpp
* Refactor edit one field dialogs to use validators and transfer data to and
from window functions.
* Add code to DIALOG_SHIM to handle validation and transfer functions since
the base dialog class code is not called by EndQuasiModal().
* Add custom validator class for filtering field text control characters.
* Add new field validator to edit schematic component dialog field text
control.
* Add new field validator to edit fields in library editor dialog field
text control.
* Make a few LIB_PART member functions const.
The new (eeschema, so far) hotkeys editor uses the right-click menu for the
reset command, so the reset-to-default function that was added in 6652
(git:0cd7476) was not accessible from eeschema.
* remove duplicate code between draw functions and STROKE_FONT used in GAL. Use only STROKE_FONT methods in draw, plot and test DRC function for texts. It remove slightly different shapes between GAL and other calculations.
* fix incorrect bounding box for texts with overbar. Especially noticeable for texts with overbar inside a copper zone in Pcbnew.
* fix a few minor other bugs related to graphic texts.
- When the Kicad manager is iconized, all other child frames are iconized (normal wxWidgets behavior)
- For viewer frames in modal mode, there is a more annoying issue: they have the wxFLOAT_ON_PARENT frame style on unix, and wxSTAY_ON_TOP on Windows.
wxFLOAT_ON_PARENT frame style is incorrect (although on most WM it works) because the parent frame (Kicad manager Frame) is not the caller. It is usually a main editor frame.
It does not work on Windows (wx STAY_ON_TOP is used).
* Now each editor frame has a null parent.
Therefore iconizing the Kicad manager frame does not iconize other frames.
* Viewer frames have null parent in normal mode and the caller parent in modal mode (therefore wxFLOAT_ON_PARENT frame style is always and correctly used)
* References to opened/closed main frames are no more managed by the (complicated) kicad code. Instead of, a non critical and more easy to understand code just uses FindWindowByName to know if a main window exists or not.
These changes do not fix all issues about Kicad frames brought to the foreground or the background, but it fixes a few issues, and AFAIK do not add other issues.
The functions involved in the problem were PGM_BASE::GetEditorName and
EDA_BASE_FRAME::OnSelectPreferredEditor:
1) OnSelectPreferredEditor showed a dialog to allow the user selecting the
editor, but before that called GetEditorName to get the name of the current
editor (to show as a default in the choose file dialog).
2) The problem was when there was no editor, GetEditorName showed its own
dialog.
3) So the user was seeing first the dialog from (2) and then the dialog from
(1).
4) As GetEditorName is used in many other places the solution I did was to add
to it an optional parameter that tells it what to do if no editor is set. To
avoid modifying other code that relies on the current behaviour, this parameter
has a default value that causes to show the dialog. But now when
OnSelectPreferredEditor calls it, it passes the parameter that causes it to
return an empty string if no editor was set.
5) Also, I found a second bug while doing it which allowed in the first dialog
to select an unexistent file (the dialog was missing the wxFD_FILE_MUST_EXIST
flag).
6) Lastly, to avoid having duplicated code (the one that showed the same dialog
and that configured the wildcard was in two methods) I created a single
function that now both functions call: PGM_BASE::AskUserForPreferredEditor.
This way we also will have consistency in the behaviour of both dialogs and
there is a single place where it needs to be modified.
I tried to merge some constants used both in legacy mode and gal mode (which were, before this patch, separate constants).
There is still a serious work to avoid different calculation code for the same text in draw and plot functions.
Work in progress to merge these calculation functions.
* Dialog copper zones: Always enable thermal shape settings, because even with no thermal, some pads can use thermal option in local pad settings.
* GAL mode: shows page limits in gray color, like in legacy mode, and according to comments in sources.
The standard library requires iterators passed to functions that modify the
container to be mutable iterators, but GCC's implementation accepts
const_iterator in some places where these are only used to mark a place,
but the actual modification happens through a different parameter.
As this breaks implementations that use the passed iterator to modify the
container (e.g. because they use a different data organization), this is
not portable; because we already have a non-const reference to the
container anyway, this is trivially fixed as well.
In the C++ standard, this function is only defined for floating point
types, and integers cannot be implicitly converted. Using explicit
conversions avoids a GCC specific extension to the standard library.
* Dick Hollenbeck also contributed commit r6440. I inadvertently forgot to set
the Bazaar author tag before I committed it. My apologies.
* Switch to static linking of libcurl and on linux and windows and also
statically link in only required portions of openssl.
* Add the required thread locks which openssl needs.
* Remove the get curl version call from BASEFRAME since it pulls in curl and
openssl into every derived wxFrame class link image.
* Remove curl function from PGM_BASE, switch to atexit() instead. Anything in
PGM_BASE made the singletops bigger.
* Tested on Linux, Windows, and OSX.
* Prevent libcurl from inadvertently being initialized twice.
* Dynamically load libcurl only when required.
* Reduce the number of worker threads when loading footprint libraries to
prevent issues with the GitHub plugin.
* Replace the wxListCtrl with a wxTreeListCtrl, allowing expandable categories
in a future change.
* Clean up the code to make HOTKEY_LIST_CTRL function a bit better on its own.
* Migrate the hotkey dialog to TransferData{To,From}Window, use matching
TransferData{To,From}Control methods on HOTKEY_LIST_CTRL so it is easy to
embed.
* Enables USE_WX_GRAPHICS_CONTEXT for OSX by default. This shouldn¡¯t be a
major change because it seems to get used on OSX behind the scenes anyway.
As a side effect, this might improve behavior with anti-aliasing because
KiCad shifts drawing by (0.5, 0.5) into the middle of the virtual pixels so
things may be less blurry. It will still build without enabling
USE_WX_GRAPHICS_CONTEXT, but the optimizations obviously won¡¯t be used.
* The optimizations currently only are effective when USE_WX_GRAPHICS_CONTEXT
is enabled and OSX. They might be also good for other platforms using
USE_WX_GRAPHICS_CONTEXT because it aggregates some drawing primitives using
paths wxGraphicsContext provides.
* It adds some #ifdefs for disabling the wxGraphicsContext stuff when
USE_WX_GRAPHICS_CONTEXT isn¡¯t enabled. If you hate #ifdefs, this also
could be dropped but then it will always check if wxGraphicsContext can be
applied.
* Fix broken ExecuteCommand() when path contains spaces on OSX.
* Only use system defined mime type for PDF files.
* Remove system dependent fallback applications for opening PDF files.
1. Fixed an assumption somebody originally made in the plugin that std::string had contiguous storage. This is not specced behavior pre C++11 so we gamble by calling .reserve() which should give a far better guarantee.
2. Added copy to clipboard information for curl
3. Removed some openssl references in compiling.md
4. Renamed struct vars to be uppercase to match "public var" code style policy
* Create base class EDA_PATTERN_MATCH to hand multiple pattern matching methods.
* Create classes for regular expression and wildcard pattern matching.
* Add new pattern matching semantics to component select dialog.
* Thanks to Henner Zellar <h.zeller@acm.org> for improvments to the original patch.
In polygon calculations (combining polygons, fracture) the mode of calculation (fast or strictly simple polygon option) as no more a default value, because choosing the best mode is better to optimize the calculation time.
Pcbnew: auxiliary axis shape: use the same look as GAL, to be consistent with GAL.
Minor change in dialog_env_var_config (use the wxStdDialogButtonSize for usual OK, Cancel and help buttons)
* Remove duplicate developer credits added in last commit.
* Update developer email addresses.
* Change copyright.h from GPL2+ to GPL3+ per FSF.
* Update newstroke license from CC-BY to CC0 with permission by author
Vladimir Uryvaev which reflects the official license on the newstroke
website http://vovanium.ru/sledy/newstroke/en.
* Coding policy fixes in AboutDialog_main.cpp.
* Component doc: add https as prefix in list of urls which are opened by a Internet browser.
* Import .cmp files: Use "IdModule" instead of "IdModule =" as keyword for footprint name and use '=' only as separator.
* Assuming: a project exists in /a/b/project.pro, and /a/b is symlinked to
/a/c
1. Load /a/b/project.pro
2. Load /a/c/project.pro
Expectation: file name switches to /a/c/project.pro (even though they are
the same file, a user would expect the path to reflect the file selection
they just made)
Reality: file name does not switch
This is because PROJECT::SetProjectFullName() does not do anything if the
path is not changed, and it uses wxFileName::SameAs() to check this. For
some bizarre reason, wxFileName::SameAs compares filesystem inodes rather
than actual paths.
This patch instead creates a second wxFileName from the candidate name in
order to normalize the path, and then compares paths directly. This should
be much more in line with what a user would expect.
* Rename Eda_FileSelector to EDA_FILE_SELECTOR.
* Add optional pointer to wxString to save the most recently used path to EDA_FILE_SELECTOR.
* Rename Eda_DirectorySelector to EDA_PATH_SELECTOR.
* Replace wxGetCwd() with wxStandardPaths::GetDocumentsDir(). This fixes the windows issue
where wxGetCwd() returns the path where the executable files are located.
* Add code to handle most recently used path to EDA_BASE_FRAME.
* Fix string formatting error in kicad/files-io.cpp.
* Remove setting and restoring current working directory when launching GerbView. Setting the CWD
has no effect on the launched executable which starts with it's own CWD.
* Allow project path to be passed to GerbView when launched from KiCad.
* Note: this is a work in progress. Do not expect every path and/or file selection dialog to properly
update the most recently used path. The correct solution to this problem requires a much more
well though out solution which will not happen until after the next stable release.
* SearchHelpFileFullPath(): clean up platform specific path code, add executable path sans bin
directory on non-osx platforms, and move KICAD path variable to the beginning of the search
list.
* Minor search stack debug output improvements.
* If a hotkey is set to "unassigned" (typically by causing a conflict), it
is not loaded correctly. The loader interprets "unassigned" as "keep the
default assignment", which leads to a conflict later that causes an
assertion failure.
* Mainly the wxDialog that was opened when the wizard is created is now no more created by the wizard frame CTOR. On some W.M. it created a serious issue related to the way Event Loops are managed. Now the user has to call it by the toolbar tool.
* 2 settings not saved in config are now saved.
* a few other minor enhancements
* better icon in footprint wizard frame
Remove a few #define relative to the wxWidgets 2.8 version, no more supported.
footprint wizard frame: now shows messages from footprints python scripts. Especially usefull when a parameter is incorrect. Fix also an other issue (IO error) with some scripts which were usint the print command to output messages (now they use the nes message window.
* Push center on zoom, use middle mouse button to pan, limit panning, and
pan while moving object settings from schematic editor to symbol library
editor and symbol library viewer child windows.
* Push center on zoom, use middle mouse button to pan, limit panning, and
pan while moving object settings from board editor to footprint library
editor and footprint library viewer child windows.
Fix an issue when a .kicad_pcb file contains an incorrect fpid ( containing a '/ ' in footprint section ) . After saving the board the file was no more readable, due to a broken fpid saved in file
(can happens in old .kicad_pcb files, coming from the bzr 4022 stable version, and/or in files converted from an other EDA tool like altium)
Fix 2 very minor coverity warnings.
* Remove ENVIRONMENT_VARIABLE_CHAR_VALIDATOR::OnChar() because it was skipping
the filtering of the first character. Not sure what was going but this seemed to fix the issue.
* Added environment variable name test to DIALOG_ENV_VAR_CONFIG::TransferDataFromWindow
because apparently validators do not get called in wxGrids even whe the extend window style
wxWS_EX_VALIDATE_RECURSIVELY is set.
* Set the default button using wxFormBuilder since the OK button is not part of a wxStdDialogButtonSizer.
* Minor improvements to the HTML help dialog.
* Fix assertion when calling HTML help dialog. Apparently any dialog derived from DIALOG_SHIM must
have a KIWAY top level window as a parent.
In 3D viewer, this option can take a *very long* calculation time (minutes instead of seconds, or hangs) and they are now using aFastMode = true to do polygon calculations, especially for zones inside zones belong to the same net but having different priority (which creates weak polygons).
aFastMode = false is the default for other calculations (zone filling) as before.
* Add code to allow each editing window it's own undo/redo count.
* Add code to allow for infinite undo/redo when count is set to 0.
* Add edit control to all editing windows general options dialog for
user configuration of undo/redo count.
* Add code to save and restore undo/redo count for each editing window.
* Update cross-hair position when using mouse wheel to pan.
* Add ugly hack when mouse cursor enters canvas to force the cross-hair visibility counter
back to zero. There was a bug on Windows when using the middle mouse button to pan
and the user released the middle mouse button off of the canvas, the cross-hair would no
longer be displayed until the window was closed and reopened.
* Use CMake add_custom_target() to run WriteVersionHeader.cmake as a command.
* Modify WriteVersionHeader.cmake to be run as a command instead of a macro.
* Add version header creation as a CMake common library build dependency.
* Add cached CMake variable KICAD_BUILD_VERSION when build version is defined during
configuration.
Add a minor change in dialog_shim only for OSX. (force raising the dialog).
Very minot other fixes: coverity warnings, better message in debug mode in baord outlines calculations.
* Fix CMake macro create_bzr_version_header to always update version.h file whenever a repo change
is found. Running `make rebuild_cache is no longer required.
* Add new CMake function for writing version.h file.
* Always use version.h file for build version string instead of meaningless hard coded date.
* Only use bzr version string when build version is not defined at configuration time for stable release
version strings.
* Minor cleanup of FindBazaar.cmake.
* Remove unnecessary version.h.cmake file.
* Wrap Pgm().OnPgmExit() changes in APP_SINGLE_TOP to build conditionally
when KICAD_SCRIPTING_WXPYTHON is enabled.
* Check the result of loading the correct wxPython version during
initialization.
Fix also an issue on Windows, when using the footprint viewer or the component viewer in modal mode:
Reason: these frames (when run under the Kicad manager) have the Kicad manager as parent, and were built with wxFRAME_FLOAT_ON_PARENT style.
On windows, when the frame with style wxFRAME_FLOAT_ON_PARENT is displayed its parent frame is brought to the foreground, on the top of the calling frame.
and stays displayed when closing the frame in modal mode.
This issue does not happen on unix so we use now wxSTAY_ON_TOP on Windows, and wxFRAME_FLOAT_ON_PARENT on unix to simulate a dialog called by ShowModal.
This is not perfect, but at least it works.
* auto-save was broken for all sub sheets with are in a sub-directory of the project directory. (reason wxFileName::Normalize(), used to create the absolute path has issues with filenames starting by '$', perhaps due to env var which also start by $). the auto-save prefix is modified ( now AUTOSAVE_PREFIX_FILENAME which defines "_save_" ) and defined only once.
* auto-save files from sub-sheets were not found due to the fact the path was not set (fixed by Blair Bonnet's patch)
* Use only double to store zoom levels in class BASE_SCREEN (int type is not working for eeschema or page layout editor) (this fix Bug #1450551, Assertion failed on wxRound() when zooming)
* Fix crash in all apps but Pcbnew when a grid or a zoom was selected from the popup menu.
* Modify default hotkeys for Next Grid and Previous Grid: the initial key was a dead key, not suitable as hotkey. the 'N' and Shift N keys are used instead (with a change for unfill zone hotkey)
* Modify code in EDA_DRAW_FRAME::SetNextGrid() and EDA_DRAW_FRAME::SetPreviousGrid() to make them compatible with other editors than the board editor.
* Add code to test if any of the components in the schematic cache have been changed
in the component libraries.
* Prompt user to accept or reject components when changes are found.
* If the user chooses to use the components in the cache, create a new library with the old
components and add it to the beginning of the component library list so the schematic will
not be changed.
* Create dialogs to handle user feedback and status.
Maciej Suminski
Tomasz Wlostowski
Michael Steinberg
jean-pierre charras
Mrio Luzeiro
Dick Hollenbeck
Wayne Stambaugh
Jon Neal
Simon Richter
Chris Pavlina
José Ignacio Romero
Simon Wells
ejs-ejs
Collin Anderson
Matthew Petroff
Robert Antoni Buj Genlonch
Robert Antoni Buj Gelonch
unknown
unknown
dwilches
Bernhard Stegmaier
Nick Winters
Simon Wells
Chris Pavlina
Damien Espitallier
Dimitris Lampridis
Brian Sidebotham
Marco Ciampa
Mathias Grimmberger
LordBlick
Marco Hess
unknown
Garth Corral