* Factor change schematic component orientation code out of switch statement
into separate function.
* Remove redundant command events from schematic editor hot key handler.
* Change EDA_ITEM set flag function to set flag bits using logical or
instead of assignment.
* Add clear flag function to EDA_ITEM to clear flag bit using inverted
logical and.
* Factor change schematic text type code out of switch statement into
a single function call.
* Schematic text orientation function renaming improvements.
* Lots of small coding policy changes to updated files.
* Merge three separate rotate code paths into a single rotate item function.
* Reduce three separate rotate command IDs into a single rotate command ID.
* Move pin rotate code into pin object.
* fix incorrect bounding box size calculation of schematic components.
* fix incorrect bounding box position and size used when schematic components are not found in lib (dummy lib componen used).
Pcbnew:
* Fix issues in block selection for arcs in modedit. Minor code cleaning.
CopyToClipboard: fix incorrect call to PrintPage (bad parameters)
* Merge two duplicate case statement and delete pin code paths into a
single delete function.
* Make all delete commands use new delete function.
* Fix a few set tool ID calls to use default cursor instead of arrow
cursor.
* Make EDA_DRAW_FRAME current tool ID member variable private.
* Added global no tool selected ID to replace application specific no
tool selected IDs.
* Change SetToolID to prevent setting the tool ID to anything less than
the new global no tool selected ID and assert on debug builds.
* Change command and update user interface command event handlers to use
new global no tool selected ID.
* Fixed schematic library editor add pin hot key handler.
* CVPcb now uses wxUpdateUIEvent instead of set toolbars.
* Removed duplicate event handlers in CVPcb that were factored into
EDA_DRAW_FRAME.
* Fix definition of GeneralControle() in CVPcb that prevented it from being
called.
* Remove rarely used and scary refresh code GeneralControle() method in all
main frame windows.
* Factor zoom menu and tool bar command IDs down to EDA_DRAW_FRAME.
* Old control state handling code completely removed in all applications.
* Factor common control state handlers into EDA_DRAW_FRAME.
* Replaced EDA_ITEM test for newness with IsNew() method.
* Factor vertical right toolbar command handlers out of giant edit command
switch statement in EESchema and PCBNew.
1- incorrect mouse cursor position when clicking on an ERC error message from dialog ERC window to go to the corresponding marker.
2- broken behavior of hierarchy navigator (horizontal toolbar, hierarchy tool)
* Rename all member variables and methods that reference the cross hair
code in draw panel object from cursor to cross hair to eliminate confusion
between the two concepts.
* Rename cursor capture call backs in draw panel object to improve code
readability.
* Create helper class for turning off the cross hair while drawing.
* Remove redundant block clear code.
* Remove redundant mouse capture call back reset code when end capture
call back is called.
* Remove unused function definitions in base draw frame object.
* Lots of minor coding policy and doxygen comment fixes.
* Fix optimized bitmap grid drawing method.
* Enable optimized grid drawing method on Windows and Linux.
* Create a helper class for resetting and restoring device context scale
and origin settings for blitting purposes.
* Use wxLogTrace instead of wxLogDebug for coordinate dumping in
drawpanel.cpp. See comments for more information on enabling coordinate
tracing.
* Add flag to allow hiding the drawing cross hair. Hide cross hair by
default on OSX.
* Move get cross hair device position code from draw panel object to base
screen object.
* Remove redundant parent member variable from draw panel object by
overriding wxWindow::GetParent() method.
very minor enhancement in netlist dialog.
Gerbview: remove useless code I wrote specific to Windows in BOARD::Draw() function, because Wayne has fixed the bug.
common_plotPS_functions.cpp: remove a potential bug.
Rename some classes according to coding style policy.
* Fix rendering bug in GerbView caused by wxDC scaling change caused by
setting the wxDC clipping region.
* Eliminate the need to have optional background erasing as the change
above fixed that problem as well.
* Default cursor handling improvements.
Use non translated fields names in intermediate netlist file because they are keyword in this file.
Change intermediate netlist file extension from .tmp to .xml
* Schematic editor cancel current tool command now use a single command
ID that is used everywhere the event is generated.
* Moved cancel current tool code from Process_Special_Functions to a
separate event handler.
* Add idle check method to block select object.
* Add block active check to base screen object.
* Remove base screen methods from draw frame object and correct current
screen methods in derived objects.
* Move restore old wires function code into schematic screen object.
* Make add junction method use current screen position instead of store
position.
* Move poly line ghosting function into the delete current segment method
as that was the only place is was being used.
* Add method to base schematic object of testing if object has a label
that can be incremented.
* Simplified the schematic hierarchy traversing code.
* PCBNew Doxygen warning fixes.
* Changed managed cursor callback definition to include the current
cursor drawing position.
* Modified all managed cursor callbacks to match new definition.
* Added snap to grid option to base drawing frame object.
* Changed add no connect managed cursor callback to use new position
parameter instead of the stored one.
* Lots of coding policy fixes.
* Remove unused member variable m_SizeVisu from base screen object.
* Move nearest grid position code into base screen object.
* Add get cursor position method to base screen object.
* Add position parameter to OnHotKey method in base draw frame and all
derived objects.
* Pass logical position on left mouse button click and double click
events instead of device position.
* Pass logical position to on right mouse button click instead of device
position.
* Use logical event position parameter for locating items in EESchema
instead of the stored position.
* Remove unused position parameter when displaying component edit dialog
in EESchema.
* Comment out debugging macro in eeschema/template_field_names.cpp that was
preventing debug builds using wxWidgets 2.8.x.
* macros.h now has TO_UTF8() and FROM_UTF8() which are working converters
to and from UTF-8 encoding for any wxWidgets build mode. We can switch to
them at any time. I am using them now for specctra conversions and
elsewhere where I wanted gauranteed UTF8 encoding.
* added OUTPUTFORMATTER::Quoted( const wxString& ) to simplify converting
to UTF8 encoded s-expression atoms. The recommended technique is now simply:
out->Quoted( wxString ).c_str()
* Remove all occurrences if #ifdef USE_WX_ZOOM and all associated code within
the #else/#endif block ( old zoom code ).
* Removed the build option for USE_WX_ZOOM from CMakeList.txt and config.h.in.
* Removed all scaling code in base screen object.
* Fixed buffered paint and buffered client DC on Windows. Buffering works
properly on Linux and Windows.
* Modified kicad_device_context.h to automatically uses buffering on platforms
where double buffering is supported natively.
* Remove all of the scaled versions of the drawing functions in gr_basic.cpp
and any support code.
* Removed all traces of ActiveScreen global variable from eeschema and
gerbview.
* Renamed Recadre_Trace to RedrawScreen in draw frame object.
* Renamed PostDirtyRect to RefreshDrawingRect in draw panel object.
* Lots of code cleaning an Doxygen comment improvements.
This was due to a duplicate constants ( with sligtly different values) used to select items in some seach functions that broke filtering. Old definitions removed.
* Use Boost pointer container for sheet hierarchy object.
* Add test for modification in sheet hierarchy list object.
* Add method to clear modification flag in sheet hierarchy list object.
* Improve Doxygen comments for sheet hierarchy list object.
* Remove redundant definitions in prototypes header file.
* Move schematic wire and bus break code into schematic screen object.
* Move schematic test for dangling ends into schematic screen object.
* Remove left over debugging output in schematic screen object.
* Remove unused file eeschema/cleanup.cpp.
* Fix bug in schematic line object hit test algorithm.
* Fix a string concatenation compile error added in r2752.
* Rename class WinEDA_BasicFrame to EDA_BASE_FRAME.
* Rename class WinEDA_DrawFrame to EDA_DRAW_FRAME.
* Rename class WinEDA_DrawPanel to EDA_DRAW_PANEL.
* Encapsulate file name member of base screen object.
* Encapsulate associated screen member of schematic sheet object.
* Create add screen method to schematic sheet object to simplify setting
the associated screen.
* Move the change file name code in the schematic sheet object to the edit
sheet method in the schematic editor frame object to eliminate message
dialogs.
* Improve reference counting in schematic screen object.
* Add helper type definitions for changing schematic object storage to C++
containers.
* TokenList2DsnLexer.cmake now supports comments, which start with a leading
# character, and may be either on their own line or on a line after a token.
* DSNLEXER::PopReader() now pops even the last LINE_READER* and returns it.
++pcbnew:
* SPECCTRA_DB now inherits from new class SPECCTRA_LEXER, which led to a great
deal of simplification and code factoring.
* Moved specctra keywords into specctra.keywords.
* TokenList2DsnLexer.cmake now wraps each token enum in its own namespace. It
also no longer setup of the "using" directive in the header file, which was
bad behavior. C++ enum values will have name collisions unless the enums
themselves are different namespaces.
++new:
* Sweet library is now a DSO/DLL.
* Brought in SWIG to do a wrap of the Sweet DSO/DLL for unit testing
and scripting. The SWIG DSO/DLLs are built separate from the Sweet DSO/DLL
and are also optional.
Pcbnew: fix that prevents loading modules from libraries (footprint name not identified in lib)
Module Editor: Try to fix incorrect printing. Fixed now only for scale 1. Nor working for other scales. (Work in progress).
Gerbview: Known bug: printing not working.
VRML export: Fix incorrect export of 3D shapes rotations when the 3D shape was rotated.
* Rename sch_item files to sch_junction.
* Make global variable g_ItemToRepeat a private member of SCH_EDIT_FRAME
object.
* Encapsulate SCH_SCREEN reference count member.
* Change default build to enable wxDC zooming.
* Move sheet label find function into SCH_SCREEN object.
* Move draw screen items function into SCH_SCREEN object.
* Remove redundant page print method from SCH_EDIT_FRAME.
* Add method to hit test for all items in SCH_SCREEN.
* Add method for testing if junction is required in SCH_SCREEN.
* Fix Doxygen waring in help_common_strings.h
* Move update block pick list code to SCH_SCREEN object.
* Remove redundant drawing function RedrawOneStruct().
* Change context menu text "Noconn" to "No Connect".
* Change context menu text "GLabel" to "Global Label".
* Move schematic select block from global variable to SCH_EDIT_FRAME.
* Remove redundant schematic drawing code for eeredraw.cpp.
* Move block select code into SCH_SCREEN object.
* Simpilify block item select code.
* Fix bug in SCH_LINE selection state test.
* Add test to schematic objects for connectability.
* Make copy block items function a private method in SCH_EDIT_FRAME.
* Schematic reference object now completely encapsulated.
* Schematic reference list object refactoring complete.
* Make OK default button in PCBNew block operation dialog.
Eeschema: cleaning code. Start work to enhance annotation algorithm.
Already added an option to annotate using sheet number (sheet 1 uses numbers 100 to 199, sheet 2 uses 200 to 299..).
Works fine if deleting existing annotation, but needs work to be used when the existing annotation is kept .
Rename EDA_Rect::Inside to EDA_Rect::Contains ( EDA_Rect::Inside( const EDA_Rect& aRect ) was very ambiguous )
Fix some Doxygen warnings and erroneous comments; Add comments.
Pcbnew: cleaning code in block.cpp, and modifye previous way to calculate block size in block command, because old way creates unexpected behavior in block rotate and block flip.
Pcbnew: Fix a bug in plot silkscreen layers.
Cvpcb: Fix compilation issue under MACOX
* Fix bug that prevented component from being replaced in library when
the component root name was changed.
* Fix drawing bug when changing text or field item string while move in
progress.
* Fix drawing bug when rotating text item while move in progress.
* Prevent undo or redo when editing a component draw item.
* Fix assert bug when replacing component in library when the component
root name was changed.
* Fix bug in field editor caused by new root alias implementation that
prevented any field from being changed.
* Fix minor spacing issues with EESchema find dialog.
* Deprecate remaining internal linked list code from component library
objects.
* Rename pin object files to match new library object file naming
scheme.
* Move LIB_TEXT object definition into it's own header file.
* All library component object editing is now performed with the ojbect
except LIB_PIN (coming soon).
* Added TRANFORM class to handle coordinate transforms.
* Remove old transform matrix functions.
* More file renaming to align them with the other component library
object file names.
* Fix hot key bugs in library editor to disable edit keys while an item
is being edited.
* Fixed bug when cancelling rotation of text and field objects while
being moved.
* Break classes_body_item.cpp(.h) into more reasonable size bites.
* Rename classes_body_item.cpp(.h) to lib_draw_item.cpp(.h)
* Fix some unsatisfied header file dependencies.
* Add stubs to component library draw item base classe to handle editing
internally.
* Lots of code cleaning.
* Use C++ map in component library instead of boost::ptr_vector.
* Drop Boost pointer containers for standard C++ containers.
* Moved duplicate name user interface elements from library object to
library editor.
* Added code to support direct addition and replacement of component
alias objects into libraries.
* Removed temporary strings used to add and remove alias objects.
* Libraries only store alias objects, components now accessed thru alias.
* Simplify library API for adding, removing, and replacing components.
* Updated edit component in library dialog and library editor to reflect
component library object changes.
* Fixed bug in library viewer when displaying alias name.
* Made a few header files compile stand alone per the new coding policy.
* Remove some dead code and the usual code formatting fixes.
* reverted clock ( --<| ) as it is commonly used for inverted clock in x-USSR
* nonlogic ( ---X ) for non-logic pins of logic ICs (commonly used for power and timing RC pins).
Added hotkeys editor from David Turner, with a lot of enhancements and fixes
Added pins connections info in intermediate netlist for each compoment. This is redundant, but some netlist formats (ORCADPCB, PSPICE) are very easy to create with this redundant info.
Revise TokenList2DsnLexer.cmake to take outCppFile and outHeaderFile optinally
and enum mandatorily. Standardize the script's invocation technique within
all the CMakeLists.txt files.
* Now link with XML support within wxWidgets.
* Start of export the generic netlist in XML. Still need to rework the chain
loaded netlist plugin.
* OBJ_CMP_TO_LIST class now uses a std::string to hold the 8 bit string m_Ref,
but hides this behind accessors which provide for both Unicode and 8 bit
set and get functions.
* build_BOM.cpp retains the selected filename on subsequent runs as a default.
* Code cleaning, especially in build_BOM.cpp.
Fixed some issues with wxWidgets 2.9.1 (fixed Gerbview and Pcbnew crashes under Linux when starting. Could explain also crashes under MACOSX)
Code cleaning.
pcbnew:
Added experimental zone fill calculations with boost::polygon
old file zones_convert_brd_items_to_polygons.cpp has now 2 versions:
zones_convert_brd_items_to_polygons_with_Boost.cpp use boost::polygon to calculate filled areas
zones_convert_brd_items_to_polygons_with_BKbool.cpp use kbool (code cleaned).
>>> to use boost polygon version:
call cmake with option: -DUSE_BOOST_POLYGON_LIBRARY=ON
Eeschema: added patches from Yuri Khalyavin
Fixed compil warning under wxWidgets 2.9.1.
File beautification
Statring using wxTextEntryDialog instead of Get_Message (because Get_Message does not handle properly cancel option)
inches and mm, the industry is crazy enough to force us with mixed
design. For example I routinely use imperial units for track size and
clearance, but drilling is strictly a metric issue...
So I added a little parser to recognize a suffix specification in the
unit text boxes... so you can put in things like:
1in (1 inch)
1" (idem)
25th (25 thou)
25mi (25 mils, the same)
6mm (6 mm, obviously)
The rules are: spaces between the number and the unit are accepted, only
the first two letters are significant.
As a bonus, it also recognize the period (.) as a decimal point
substituting it with the correct locale character (there was a wishlist
for it, IIRC). Most useful for number pad fans :D
* Continue component library class clean up and encapsulation work.
* Change hierarchical sheet label container to boost::vector_ptr.
* Encapsulate hierarchical label handling in hierarchical sheet class.
* Convert some missed occurrences of wxString::GetData() to GetChars( wxString ).
* Fix some minor code formatting issues.
In netlist generation, changed the rule to calculate netnames of nets with labels:
Previously, named nets (i.e. nets with local, hierarchical or global labels) have their name
defined by the first label found in list.
So net names could be changed without really changing the schematic.
Now the names are calculated from the rules (by priority order) :
1 - use the most top level labels in hierarchies.
2 - use global labels first, local labels next (hidden power pins names are global labels).
3 - use alphabetic sort (so, if GND and AGND are connected, the net will be always named AGND,
and adding a VSS connection cannot change the net name)
So power nets and nets that have more than one label cannot have their netname changed
if there is no actual change relative to these nets names in schematic
* Fix a minor problem with wxFileDialog to open a file that no longer
exists in PCBNew.
* Make GerbView open file behavior the same as PCBNew.
* Remove redundant PCB file wild card definition.
* Add open file refactor task to the todo list.
* Fix some minor code formatting issues.
* Add CMake script to generate DSN token header and source file from
token list file.
* Add preliminary component library DSN token list and lexer file to
test script and prepare for new component library file lexer.
* EESchema: right click on ERC check mark displays error in message panel.
* Remove PCBNew header file dependency from common DSN lexer source.
* Minor code clean ups.
* Some bugs fixed
* Starting enhancements in Libedit: menubar and commands to "plot" current component in PNG or SVF file (SVG file not fully working, must be refined)
* Replaced find dialog with wxFormBuilder version.
* New find dialog is modeless, supports more advanced search features,
remembers it's last position, size, search history, and search settings,
and implements initial support for replacing.
* Added Shift+F5 hot key to search for next DRC marker. F5 now just
repeats previous search.
* Minor cosmetic enhancements to label edit dialog.
* Remove tab from grid size text printf to fix toolbar grid combobox
display in wxGTK.
* Updated my TODO list items.
- in bloc delete, *do not delete* reference and value fields, that must always exits.
- in block copy *do not duplicate* fields that must be unique for the whole component.
a common part being defined as have a common value.
This is true for most designs but will produce an
incorrect output if two or more parts with the same
value have different footprints, tolerances, voltage
rating, etc. Also usefull if the following fields
are edited:
FIELD1 - manufacture
FIELD2 - manufacture part number
FIELD3 - distributor part number
Check in code for now, doc later.
(non consistent edit pin per pin option and erroneous pin number edition)
Pcbnew: fixing a problem in dialog design rules for small screens (768 pixels height); Better look on bigger screens
* Make USE_WX_ZOOM clipping routine actually clip rather than just test
if line needs drawn.
* Clean up as many USE_WX_ZOOM #ifdefs as possible.
* Minor coordinate rounding improvements.
* Minor scrolling and panning improvements.
* Remove unused KicadGraphicContext object code.
* Changed line clipping function in gr_basic.cpp when USE_WX_ZOOM is
enabled.
* Set wxDC clipping region to client size when drawing outside of paint
event handler.
* Updated kicad and eeschema CMake files as the common library now
requires linking to the polygon library.
* Fixed clipping bug when USE_WX_ZOOM is enabled that causes rats nest
to be drawn incorrectly.
* Fix ambiguous function error in trigo.cpp when building with MSVS.
* Add instructions for building wxWidgets with graphics context
enabled (GDI+) using MinGW/MSYS to COMPILING.txt.
* Initial EESchema find dialog work.
* Set modified flag when using PCBNew global deletion dialog to prevent
closing without warning user of changes.
* Implement code to allow wxDC to handle coordinate conversions between
device and drawing units.
* Add build settings to enable wxGCDC for wxGraphicsContext testing.
* Remove wxAUI conditional build cruft as it is now required to build
Kicad.
* Fix scroll increment size regression to prevent jumping around the
zoom center position.
* Add find GDI+ cmake module for building on WXMSW when wxGraphicsContext
is enabled.
* in variable names, change non existent word Hight to High
* Remove redundant tool in left toolbar (option toolbar)
(this option is now in layers manager)
* Show layers in horizontal combo box in same order as in layer manager.
++all:
minor code cleaning.
* Remove redundant background redrawing RedrawActiveWindow.
* Remove redundant managed cursor callback in RedrawActiveWindow.
* Use refresh to redraw instead of directly calling RedrawActiveWindow.
* Remove unused SetDrawBgColor for drawframe.cpp.
* Fix compiler warning in cvpcb/cvframe.cpp.
* Fix menu spelling and syntax errors in pcbnew.
* Rename Trace_Curseur to DrawCursor in common/drawpanel.cpp.
* Fix debug asserts when passing NULL pointers to wxAuiPaneInfo.
* Fix Kicad main window sash sizer bug when using wxAui.
* Remove specctra_test from Visual Studio builds to prevent build errors.
* Add WIN32 to layer widget test so it will build properly on Visual Studio.
* Fixed compiler conversion warnings in PCBNew.
* Fixed worksheet print scaling in PCBNew.
* Minor code renaming.
* Replace EESchema sheet properties dialog with wxFormBuilder version.
* Editing an existing sheet now marks schematic as modified.
* Code style updates for some of my previous work.
* Improvements to the CMP_LIB_ENTRY object.
* Replaced symbol edit export fprintf code with wxFFile implementation.
* GCC compiler warning fix in pcbnew/drc.cpp.
* Replace schematic editor options dialog with wxFormBuilder version.
* Fix ugly wxGTK sizer hack in pin properties dialog.
* Set dialog minimum size after initial fit to prevent dialog controls
from being obscured when resizing.
* Move bitmaps in annotate dialog for cleaner control alignment.
* Make cancel button delete new pin instance.
* Make pin redraw correctly to prevent display corruption.
* Prevent edited pin from being move on next left button click.
* Change pin edit property dialog focus to pin name edit text control.
* Complete comment translation for all EESchema source files.
* Complete comment translation for all 3D viewer source files.
* Rename class class_hierarchical_PIN_sheet to SCH_SHEET_PIN.
* Rename class DrawSheetStruct to SCH_SHEET.
* Tool tip capitalization fixes.
* Uncrustify and spell check comments and strings in all modified source
files.
* Replaced library pin properties dialog with wxFormBuilder version.
* Remove DialogBlocks version of pin properties dialog.
* Add pin properties dialog support code to pin object.
* Create single event handler for displaying pin properties dialog.
* Remove left over DialogBlocks project file for annotate dialog.
* Fixed escape key bug in library editor new component dialog.
* Add GetUnitsLabel() to get human readable units for dialog labels.
* Translate French comments in all modified files.
* Some minor clean up of Doxygen comments.
* Use single list for component library draw item and fields to simplify
component library object.
* Add field manipulation helper methods to component library object.
* Make component library draw item edit dialog sizable.
* Created new component library editor draw item dialog box with
wxFormBuilder.
* Removed previous DialogBlocks version of the draw item dialog box.
* Removed some additional global variables used in component library
editor.
* Add IsFillable() method to draw item base object.
* Replace all known instances of (const wxChar*) casts to GetChars() for
wxWidgets 2.9 compatibility.
* Cleaned up get component dialog so last part gets saved on wild card
selections.
* Remove redundant schematic component drawing code.
* Added SCH_COMPONENT constructor to create new component from library
component object.
* Add message panel helpers to WinEDA_DrawFrame and update old message
panel access code.
* Using library viewer to add component to schematic now respects unit
and body style selection.
* Create single event handler for grid size events.
* Fix all frame windows to use new grid size event handler.
* Use offset relative to ID instead of ComboBox index to save last grid size.
* Move last grid size load/save setting into WinEDA_DrawFrame.
* Add equality and assignment operators the GRID_TYPE.
* Add current grid helper methods to BASE_SCREEN.
* Add GetPins helper to LIB_COMPONENT to replace GetNextPin where applicable.
* Add AppendMsgPanel helper to WinEDA_DrawFrame.
* Improve rounding for display of coordinates when millimeter units are selected.
* Replace component library editor new component dialog using wxFormBuilder.
* Rename component library draw items to conform to current coding standards.
* Add GetWidth() method to component library draw objects.
* Add regular expression key word search capability to component library object.
* Library component draw items now stored in Boost ptr_vector.
* Updated draw item object comparison to include greater and less than condition.
* Moved set parts per package code from component edit dialog to component object.
* Moved set alternate body style code from component edit dialog to component object.
* Tweaked component library file draw item sort order for improved file readability.
* Documented component object draw item sort ordering.
* Moved plot code to the appropriate library component and draw item objects.
* Fixed compiler type conversion warning in plot_common.h.
* Component library viewer restores state between uses.
* Fixed automatic zoom calculations in library viewer.
* Make library entry list dialog restore previous selection.
* Fix bounding box calculation for vertical field and text draw objects.
* Changed library draw object comparison to test for greater and less than.
* Initial preparation for merging separate library component draw item lists.
* Component library objects renamed for improved readability.
* Fields now move when selected in library editor.
* Add copy constructor to all library draw and library component objects.
* Added copy constructor to EDA_BaseStruct.
* Delete base screen in WinEDA_DrawFrame destructor to prevent potential memory leak.
* Fixed memory access bug when replacing and adding a component to library.
* Moved library component block manipulation code into component object.
* Removed all of the global variables used by the library editor main window object.
* The usual code cleaning and refactoring.
* Split out application specific command IDs to prevent unnecessary rebuilding.
* Eliminate duplicate menu and tool bar command IDs.
* Split component library editor and viewer definitions to separate header files.
* More component library and document file merge code.
* A bunch of minor string readability and consistency fixes.
* Create static component library methods to manage library list.
* Rename component library, component, and alias objects to more readable name.
* Use pointer to component instead of root name to prevent redundant library searches.
* Add append message helper to message panel that calculates string length.
* Initial ground work for merging library and library document files.
* Improved component library file load error checking.
* Minor component library editor improvements.
* Add offset and block hit testing to library component objects.
* Improved search for library entries.
* Fixed library component editor component removal and addition.
* Library editor now uses wxUpdateUIEvents for updating all UI objects.
* Added version check to cmake find boost macro.
* Removed unused code in file libalias.cpp.
* Added method to WinEDA_DrawPanel to take mouse out of managed mode.
* Library component objects can now draw themselves without external drawing code.
* Fix all the library drawing and field objects to support component drawing code.
* Provide proper file dialog wild card for symbol libraries and us wxFileDialog.
* Update component library editing code to reflect component drawing changes.
* Replaced WinEDAListBox buttons with wxStdDialogButtonSizer.
* Moved library draw entries GenCopy method to base class.
* Remove priorque.cpp and priorque.h from CMakeLists.txt.
* The usual code cleaning and uncrustification.
Moved all library entry manipulation code scattered throughout EESchema into
the component library object itself. Adding, removing, and searching is now
handled by the library object. This is the precursor to replacing the current
priority queue code.
This is the first in a series of updates to the schematic library component
object code. The goal is to eliminate the external manipulation of these
objects and push this code back into the objects themselves. Also replace
the priority queue and internal linked list implementations with DLIST or
Boost pointer containers.
* Added modified version of FindwxWidgets.cmake to prevent manifest build and link errors
with VC8.
* Fixed ambiguous math function ( sqrt, atan, cos, etc. ) call errors when building
with MSVC.
* Moved bitmap copy bitmap source file destination to the build path to prevent source
tree pollution and library rebuilds when building on different platforms.
* Created separate SVN version header.
* Add true config.h for platform dependency checks.
* Add dependency check cmake module.
* Remove some leftover hand crafted make files.
* Remove non-cmake build instructions from COMPILING.txt.
* Fix split _() strings causing Visual C++ compiler error.
* Fix lots of compiler warnings.
* Change project file parameter container from wxArray to boost::vector_ptr.
* Removed lots of redundant header definitions.
* Fixed green_xpm redefinition in ercgreen.xpm.
* Remove some dead code and unnecessary class methods.
* ALL: More changes for wxDC based zooming.
* 3D_VIEWER: Wrap 3d_viewer.h to prevent redefinitions.
* CVPcb: Replace wxList with boost::ptr_vector and take advantage of boost::foreach.
* CVPcb: Fix automatic association bug.
* CVPcb: Rename some variables for clarity and some minor code clean ups.
* CVPcb: Fix GTK sizing issue in library and path dialog.
* EESchema: Remove left over sizer from last commit from library and path dialog.
* All: remove all remaining occurrences of g_DialogFont and dialog font menu handers.
* All: remove all remaining non-standard fonts and button text colors from common dialogs.
* PCBNew: remove all non-standard fonts and button text colors from dialogs.
* PCBNew: update project library and path dialog to match changes to CVPCB version.
* EESchema: update project library and path dialog to match changes to CVPCB version.
* EESchema: save vertical/horizontal line direction setting between sessions.
* All - add wxList implementation for dynamic declaration of application settings.
* EESchema: remove non-standard fonts and dialog button text colors from all UI controls.
* EESchema: update project file and application settings from static to dynamic method.
* EESchema: save and restore show hidden pins state between sessions.
* EESchema: global variable reductions.
* EESchema: use EVT_UPDATE_UI instead of SetToolbars() to set control states.
* EESchema: remove unused DialogBlocks BOM dialog project file.
* GerbView: remove non-standard fonts and dialog button text colors from all UI controls.
* GerbView: fix infinite loop when parsing RS274X aperture definitions with whitespace.
* GerbView: add file name to export to PCBNew select layer dialog.
Small change in doc files: footprint_doc moved from help to share/modules
TODO: change dialog_cvpcb_config and copy code (from pcbnew) for multiple user paths in library path list in cvpcb.
* Add default OS program install path(s) to search path list as fail safe.
* Remove unnecessary wxGetApp calls in WinEDA_App class methods.
* Remove non-standard message panel font and changed background to system menu color.
* Remove italic fonts from menus.
* Remove non-standard font in Kicad app project tree.
* Remove font selection dialog menu items from apps for removed fonts.
* Remove all global variables and settings associated with the removed fonts.
* Fixed PCBNew export and import library file dialog response tests from wxCANCEL to wxID_CANCEL.
Add helpers for inserting paths to and removing paths from search list.
Moved user defined path before default library paths in search list.
Renamed m_Draw_Auxiliary_Axis to DrawAuxiliaryAxis.
Changed parameter to fix wxDC set mode from FALSE to GR_COPY.
Minor wxDC zoom improvements.
Added application method to fix searching for user libraries.
Fixed documentation search path bug.
Moved auto pan setting from draw frame to draw panel were it is defined.
Some minor device context drawing changes.
Added template subdirectory to library search path list.
Removed PARAM_CFG_BASE empty destructor to prevent GCC warning.
Set timeout to 0 on DisplayInfo call to prevent debug assertion in eeschema/files-io.cpp.
Declare PARAM_CFG_ARRAY for future project file object implementation.
Removed unnecessary COMMON_GLOBL definition in gr_basic.h and param_config.h.
globbing handler. There should be no reason the mask cannot have two '*'s
in it.
The wildcard part of the mask component should be discarded when the user
picks an actual file. For now, we work around this bug by removing the
2nd mask.
jean-pierre charras
Wayne Stambaugh
Dick Hollenbeck
Marco Mattila
Lorenzo Marcantonio
Marco Serantoni
Vovanium
Andrey Fedorushkov
Yury Khalyavin
Jason Oster
Mathew Beckler
jp
Jerry Jacobs
Jerry Jacobs