1218f61d0a
Implement undo/redo for footprint children.
...
Our special-cases to handle the fact that we didn't do this had far
outgrown the code necessary to actually handle it.
2023-07-15 17:37:31 +01:00
cf8294b5c2
Remove a bunch of blind (and a few redundant) static_casts.
2023-07-13 14:14:45 +01:00
ae60b57c3d
Add default parameter to PCB image placement action
2023-07-13 13:15:19 +01:00
e82a58a12e
Changed: Allow filling/unfilling individual zones with no selection
...
The draft fill and single zone unfill would only work if something was
selected first, this allows them to call the selection operation to
request what is under the cursor. Also properly gate the operation to
not cause crashes/issues when the selection contains non-zone items.
2023-07-12 23:00:13 +01:00
a8f628d0df
Add virtual destructor for base class
2023-07-12 19:39:15 +01:00
09c0f713cd
Add fillet and chamfer icons
2023-07-12 19:21:47 +01:00
a72ab9f351
Put fillet, chamfer and extend in a submenu
2023-07-12 19:21:47 +01:00
046d978ba7
ADDED: Pcbnew chamfer and extend tools
...
Using the new ITEM_MODIFICATION_ROUTINE system, drop in two new
tools: chamfer and line extend. These are two geometric operations
that are relatively common when editing footprints in particular.
Chamfer delegates the geometric calculations to a dedicated unit
in kimath/geometry.
2023-07-12 19:21:37 +01:00
8e0e9ce752
Generalise fillet tool
...
Describe the actions of the fillet tools is a generic way, so that the
same general pattern can be used for other tools that modify shapes on
the BOARD.
Basically, an "ITEM_MODIFICATION_ROUTINE" is defined, which is
configured and called multiple times, calling back to the EDIT_TOOL when
it modifies or creates an item.
The motivation here is to make it easier to slot in new line-based
tools like chamfer, extend and so on without having to redo the
complicated item, selection and commit handling each time, and keep the
core "routines" simple and decoupled from the EDIT_TOOL's
internals.
This also resolves #15094 because the new commit handling does the right
thing when items were "conjured up" for the fillet (e.g. when a
rectangle is decomposed into lines).
Fixes : #15094
2023-07-12 19:21:26 +01:00
be63e1824e
Create filled polygons when centerline is chosen.
2023-07-12 10:41:46 +01:00
c3d10084b9
ADDED footprint associations dialog.
2023-07-11 14:52:05 +01:00
aab8d2b036
Give autocomplete routing a default parameter
...
Fixes KICAD-2M4
2023-07-10 19:41:03 +01:00
bdaad32dc8
Pcbnew: fix crash when trying to delete a DIMENSION living in a footprint
...
Fixes #15156
https://gitlab.com/kicad/code/kicad/-/issues/15156
2023-07-09 20:02:56 +02:00
d26aa7dc20
Pcbnew moveIndividually ctrl-M mangles 2+ tracks
...
CHANGED: moveIndividually ctrl-M not mangle tracks and add grid snapping
Fixes https://gitlab.com/kicad/code/kicad/issues/15124
2023-07-08 09:11:53 +00:00
27072e52f7
Fix a compil and Coverity warnings
2023-07-07 10:28:01 +02:00
ef8cf2d12b
Avoid inheriting for POSITIONING_TOOLS_MENU
...
This only uses the public interface of CONDITIONAL_MENU,
so we can just make on of those and save declaring a wrapper
type.
2023-07-06 21:11:51 +01:00
efb452df37
PCB: selectionCursor can optionally take a filter list
...
Make sure we pass a default nullptr parameter if we want everything.
2023-07-06 11:25:53 -04:00
50e0a3a500
Move layer ID to action mapping to PCB_ACTIONS
...
This mapping function is better suited for a method of the actions
itself rather than just a helper function in one file.
2023-07-05 11:09:34 +01:00
9ff33e5ec6
Remove BOARD_COMMIT( TOOL_MANAGER ).
...
It initializes both m_isFootprintEditor and m_isBoardEditor to false,
causing all sorts of trouble.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15072
2023-07-01 11:52:46 +01:00
7ed5963b4f
Disable positioning tools when a move is in progress.
...
Also fixes a typo in EDIT_TOOL::doMoveSelection().
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15090
2023-06-30 20:37:03 +01:00
773e1a1ab6
Actions with a COMMIT must be run synchronously.
...
Note that "immediate" doesn't mean quite the same thing: while it will
enter the tool immediately, it won't necessarily finish the tool during
the call if the tool has an event loop. So for something like Rotate
"immediate" and "synchronous" have the same behaviour, but for something
like Move they do not.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15085
2023-06-30 18:57:37 +01:00
30f20a694d
Give default parameter to net highlight/selection events
...
Fixes KICAD-2C7
Fixes KICAD-2C3
2023-06-29 00:17:12 +01:00
0de6fb03ba
Give updateLocalRatsnest action a default parameter
...
Fixes KICAD-2BX
2023-06-29 00:17:12 +01:00
459e6e192a
Give placeFootprint action a default nullptr parameter
...
Fixes KICAD-2BT
2023-06-29 00:17:12 +01:00
1411b09178
Remove EDIT_TOOL's quasi-global BOARD_COMMIT.
...
It had several encapsulation leakage issues, as well as poorly-defined
behaviour of undo for chained-actions (append-to-board, and then rotate
while moving, for instance).
2023-06-27 17:04:18 +01:00
2fb6f19a84
Separate immediate and delayed action dispatch
...
Using a boolean argument just leads to a lot of trailing booleans in the
function calls and is not user friendly. Instead, introduce PostAction()
to send an action that runs after the coroutine (equivalent to passing
false or the default argument), and leave RunAction as the immediate
execution function.
2023-06-27 00:57:59 +01:00
493828cc6b
Eradicate a bunch of calls to dyn_cast.
...
Also deletes PAD::GetParent() which fails to look for parent footprint
through groups.
2023-06-25 11:10:07 +01:00
300a60e88e
Eradicate a bunch of calls to dyn_cast.
2023-06-25 11:10:05 +01:00
3a0f8214fa
ADDED: Properties panel for schematic editor
...
Initial infrastructure work; follow-ons will add more
properties for schematic items.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6351
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14105
2023-06-22 22:32:24 -04:00
f14feafc6b
Convert selection vector to EDA_ITEMS for base tool call
...
The base tool expects a generic EDA_ITEMS, but the existing vector
doesn't easily cast, so add a temporary one.
2023-06-20 21:52:50 +01:00
f899d9676f
Remove unneeded parameter from tool call
2023-06-20 21:52:50 +01:00
0a3b6c2d23
Fix call to properties when editing newly placed dimension
...
The edit is intended to be on the newly placed dimension, but the actual
properties tool doesn't take an item, so it was always looking up the
item to edit using the current selection/cursor position. Make this more
robust by just calling the edit properties directly on the item.
2023-06-20 21:52:50 +01:00
3c24ddd8cc
Fix passing CLIENT_SELECTION_FILTER through the tool framework
2023-06-20 21:52:50 +01:00
480223f67c
More RunAction specialization
2023-06-20 21:52:50 +01:00
3718ecfcd8
Simplify forcing action parameters to have a specific type
2023-06-20 21:52:50 +01:00
07cc85e76c
Fix more places where casts into RunAction were happening
2023-06-20 21:52:50 +01:00
8f3d159905
Update the net highlight action to properly use the action parameters
2023-06-20 21:52:50 +01:00
8b833211b5
Add parameter to repair board action
...
The tool checks for a boolean action, so default to giving false (which
makes it run in interactive mode).
2023-06-20 21:52:50 +01:00
b04e54dbea
Switch TOOL_EVENT and TOOL_ACTION to have a std::any parameter
...
Using std::any from C++17 allows for proper type handling in the
parameter field, removing the need for casting to void* and then casting
the void* to the desired type.
2023-06-20 21:52:50 +01:00
6d93950dcc
PCB: abolish TEXT_TYPE::TEXT_is_*
...
PCB_TEXT is now always what was formerly TEXT_is_DIVERS and PCB_FIELDs
now what mandatory field type they are already.
2023-06-20 18:34:52 +00:00
37837dc392
PCB: introduce PCB_FIELD_T
2023-06-20 18:34:52 +00:00
a859b25d2c
PCB: convert footprints to use PCB_FIELDs for fields from schematics
2023-06-20 18:34:52 +00:00
30336b2fe3
Unify go-back-one-step processing for drawing tools (and router).
...
Also warps mouse on all go-back-one-step operations for better feedback.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14981
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9985
2023-06-19 17:14:32 +01:00
b424dc11e1
Hotkey feedback for inactive layer display mode
2023-06-17 23:47:26 -04:00
ef6866757e
Treat undo as backspace and/or escape when drawing. Ignore redo.
...
Undo == backspace when drawing a polygon or chained lines. Otherwise
it's an escape.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14961
2023-06-16 22:08:21 +01:00
9ed2458f00
Reset session drawing props after Board Setup.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14932
2023-06-13 11:06:10 +01:00
93789e75b9
Re-create missing exclusion markers if DRC was cancelled.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14919
2023-06-11 12:14:27 +01:00
96a221ceba
Refresh delete immediately; don't wait for next mouse motion.
2023-06-10 21:11:05 +01:00
111d0a2c14
Check for proxy references and values in Selectable().
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14911
2023-06-10 17:47:29 +01:00
b41606ecf7
Use the correct printf format for the move individually status text
...
Fixes sentry KICAD-1ZT
2023-06-04 21:08:13 -04:00
bdee545841
Coverity warning fixes.
2023-06-03 07:28:17 -04:00
9a47b34499
Replace PAD_SHAPE::RECT by PAD_SHAPE::RECTANGLE to avoid a collision NAME with a windows header on MSYS2, creating many compil warnings. No actual code change.
2023-06-02 12:18:24 +02:00
c71cf21e2f
Use rendered text to generate bounding box for knockout text.
...
Don't open-code knockout text shape generation in several different
places.
Make sure triangulated knockout text gets clearance added when
specified.
Collapse duplicated footprint text item plot routine (they're no
longer any different from plotting pcb text items).
2023-05-28 17:20:11 +01:00
14f004d2a5
Hook up text variable auto-complete for PCBNew.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14777
2023-05-25 10:24:50 +01:00
2ac3f4cc9e
Undo strategy based on being in a footprint, not footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14799
2023-05-23 17:56:12 +01:00
8b1fd62d35
Make pad & via teardrops 1st-class citizens (props of the pad/via)
...
Change teardrop generation to rely more heavily on BOARD_CONNECTIVITY
for improved performance.
Add updating of teardrops on BOARD_COMMIT::Push().
Also converts m_CopperItemRTreeCache to std::shared_ptr.
We don't copy it around anyway, and having to create a new set
of std::unique_ptr's for each operation is likely to be more
expensive than std::shared_ptr's overhead.
2023-05-19 18:02:03 +01:00
daa3a1aae9
Revert addition of update-teardrops checkbox to DRC dialog.
2023-05-11 14:53:28 +01:00
04a53ea40d
Picker Tools: make sure we know what tool we are
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/14621
2023-05-01 12:43:09 -04:00
6807ca6f9f
Allow text input to Convert to Polygon/Zone/Keepout.
...
Also fixes non-copper zone filler to honor fill keepouts.
Fixes https://gitlab.com/kicad/code/kicad/issues/14566
2023-04-28 17:43:08 +01:00
c781fde236
pcbnew: don't move twice
...
In pcbnew, if you press M to move your selection and press M again, then escape, you will trigger the https://gitlab.com/kicad/code/kicad/-/blob/master/common/tool/tools_holder.cpp#L106 assert
2023-04-26 15:37:18 +00:00
2f392352b5
EDIT_TOOL::doMoveSelection(): avoid calling PushTool() and, just after,PopTool()
...
for the *same* event: TOOLS_HOLDER::PopTool() does not work fine in this case.
2023-04-26 13:00:50 +02:00
d4cf063e40
Fix a few more doxygen errors (no actual code change)
2023-04-19 20:24:42 +02:00
51e55dd750
Convert sprintf to snprintf in most files
2023-04-17 15:39:34 +00:00
2d15067453
ADDED allow update of teardrops before running DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14264
2023-04-15 12:18:41 +01:00
521aa5b5ae
Update DRC exclusions model to match terminology.
...
DRC exclusions were originally written following the C++
pragma model (ie: allow this violation here). However, the
"exclusion" terminology we used in the GUI suggests a model
model where the exclusions go away when the violation no
longer exists.
Fixes https://gitlab.com/kicad/code/kicad/issues/14351
2023-04-15 12:18:41 +01:00
e1c9e0e6fc
ADDED memberOfFootprint() to DRC custom rules functions.
...
Also added memberOfGroup(), and deprecated memberOf().
2023-04-12 14:06:09 +01:00
a9b2234f4e
Use a softer Reset for grid settings.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14458
2023-04-04 17:05:21 +01:00
77639a540b
Add messages for clearance reports on footprints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13874
2023-04-02 19:12:19 +01:00
28028c941e
Retire Local/Draw coords distinction from PAD (the last object to have it).
2023-04-02 18:02:41 +01:00
054de5687c
Pcbnew: fix crash when trying to delete a PCB_TEXT.
2023-04-02 12:15:18 +02:00
bbd6c80507
Collapse FP_* down into their PCB_* equivalents.
2023-03-31 22:57:46 +01:00
683a327200
Footprint editor: always export the currently loaded footprint.
...
Previously, it was not always the edited footprint, but a footprint
selected from the library tree.
It was especially annoying when the footprint was loaded from the board editor:
The footprint was not the loaded footprint, but its copy from library.
2023-03-29 18:47:39 +02:00
a214ac0310
Better reporting of copper <--> keepout area clearances.
...
(Keepout areas can keep-out copper, but they don't have a clearance
to copper.)
Fixes https://gitlab.com/kicad/code/kicad/issues/14375
2023-03-26 20:57:59 +01:00
bb2a0f825a
Orthogonal dimension are always cardinal, even when their start points are not.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13728
2023-03-20 21:22:11 +00:00
897984aa22
Filter Selected Items... is inclusive, not exclusive.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14273
2023-03-19 20:43:18 +00:00
ad5d3d4eba
Clean up items which weren't pasted from clipboard.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14335
2023-03-17 23:17:15 +00:00
8fe78101db
Don't create 0-length tracks when placing via in the middle of a track.
2023-03-16 04:53:26 +03:00
37b0a5a504
Add quick DRC action for Diff Footprints.
...
Also makes the strings match the GUI better so people will know where
to find them later.
And fixes a couple of ERC items that referred to Board Setup (oops).
2023-03-14 11:52:23 +00:00
a0adb59437
Update dimension units when opening PCBs in CLI.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/14170
2023-03-13 20:26:11 +00:00
66f6168163
Fix mode-less dialog issues.
...
Don't assume the dialog is mode-less and call Destroy() from within a
dialog method. This will most assuredly crash if the dialog is shown
modally or quasi-modally.
Don't leak memory for mode-less dialogs created on the stack. Make sure
when the parent frame window is closed that all mode-less dialog memory
is cleaned up. Dialogs are not child windows like controls and toolbars
so their memory does not automatically get cleaned up when the parent
window is destroyed.
Do not directly access frame parent window's pointer in dialog destructors.
Apparently the tear down order when destroying mode-less dialogs is not
guaranteed so the parent window may get deleted before the dialog causing
a crash when accessing the parent window pointer from the dialog dtor.
Do not close mode-less dialogs in the parent frame's destructor. This
doesn't guarantee that the dialog(s) will be destroyed before the parent
but it may reduce some careless mode-less dialog event handling in the
future.
2023-03-13 12:04:01 -04:00
74f064d3aa
Don't keep smart pointers to wxWindows, particularly modeless ones.
...
wxWindows have their own lifecycle management.
2023-03-11 19:36:01 +00:00
9546a40662
Correct usage of elipses after menu items.
...
(They should only be used when we collect more info before performing
the command. If the command is something like showing the simulator,
then there should be no elipsis as we don't collect more info before
showing the window.)
Also improves a few of the menu tooltips.
2023-03-10 21:33:06 +00:00
357427d803
Graphical diff for board vs library footprints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13736
2023-03-10 17:16:40 +00:00
bc0d59801a
Graphical diff for schematic vs library symbols.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13736
2023-03-09 18:04:52 +00:00
2d6ab62da4
ADDED: schematic/library diff for symbols.
2023-03-09 18:04:52 +00:00
25623552f6
ADDED: board/library inspection for footprint differences.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13736
2023-03-06 23:08:59 +00:00
c54c254f96
Don't allow footprint editor pad tools to run outside footprint editor.
...
(They can get called if a user re-assigns hotkeys to them.)
Fixes https://gitlab.com/kicad/code/kicad/issues/14166
2023-03-06 14:43:57 +00:00
461def2719
Move automatic dimension processing inside PCB_DIMENSION_BASE.
...
Also move dimension precision to an enum so it can get a proper dropdown
in the properties inspector.
2023-03-05 15:19:06 +00:00
23accffc6d
Add Property Inspector support for dimension objects.
...
Includes changing the class hierarchy so that dimension objects inherit
from PCB_TEXT rather than containing a PCB_TEXT member variable.
2023-03-04 23:16:46 +00:00
789bf6455a
Coverity fixes and code cleaning.
2023-03-02 09:04:47 -05:00
1b8b216ac8
Bitmaps are not actually copper
...
We report bitmaps as being 'on' a copper layer because they are
associated with it but they are not actually physical parts so should
not be included in the DRC checks
Additionally, Bitmaps effective shape starts are the top left corner
rather than the center (unclear why that was there in the first place)
Fixes https://gitlab.com/kicad/code/kicad/issues/14065
2023-02-23 14:16:28 -08:00
aacc9746e3
Yeet the last of wxSize/wxPoint to stop leaking gdicmn everywhere
2023-02-18 22:57:18 -05:00
f7d59f2e89
Enable properties panel in footprint editor
2023-02-17 20:35:56 -05:00
ecb28ddf1c
Prevent ghost image after canceling bitmap placement.
2023-02-17 03:53:44 +03:00
978c2b074e
Negative clearance means test will be ignored, not rule.
2023-02-16 17:39:47 +00:00
4b07e3e413
Common Actions: Find Previous
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8968
2023-02-14 08:21:37 -05:00
3e715c99c8
Swap: take S key now that it's available
2023-02-14 07:42:06 -05:00
499b58f505
ADDED: user-specified gap and linewidth for bounding hull creation.
2023-02-12 23:16:45 +00:00
4665823089
Turn on and fix MSVC compliance mode issues
...
We want /permissive- to enable debug performance improvements in MSVC 17.5+.
This flag is also default under C++20 so we'll have to deal with these compile issues anyway at some point in the future.
In particular, MSVC becomes pedantic about ternary types.
See https://learn.microsoft.com/en-us/cpp/build/reference/permissive-standards-conformance?view=msvc-170#ambiguous-conditional-operator-arguments
MSFT cites https://cplusplus.github.io/CWG/issues/1805.html
2023-02-12 16:30:37 -05:00
362d85ef50
Special selection mode when in high-contrast with courtyard layer active.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13521
2023-02-11 21:11:07 +00:00
b888714ed5
Don't discard temporary item being placed if placement is rejected
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13697
2023-02-11 08:40:33 -05:00
538ee12188
Pcb editor: fix crash when trying to activate the "place anchor" tool.
...
"place anchor" tool exists only in the Fp editor. However, the hotkey
to activate this tool was also active in the board editor. Now disabled.
2023-02-09 16:29:33 +01:00
fcefb5f86d
Re-allows selection of bitmaps not owned by a footprint.
...
It was broken by my commit f8051d95Fixes #13747
https://gitlab.com/kicad/code/kicad/issues/13747
2023-02-02 18:09:37 +01:00
f8051d954a
Better handling of PCB_BITMAP items in a footprint.
...
- Ensure they can be erased in the FP editor
- Ensure they cannot be selected in the PCB editor (they are not show)
Fixes #13714
https://gitlab.com/kicad/code/kicad/issues/
2023-01-31 11:16:38 +01:00
ce06171561
Convert additional sprintf to snprintf
2023-01-30 16:22:03 +00:00
b1018e8eeb
Relax no-zone-commands constraint on interactive placer tools.
...
These tools are initialized with an item (via/pad/microwave) so there's
no way to tell between during-placement and idle. Besides, they don't
update the ratsnest so they probably won't fall afoul of the original bug
(https://gitlab.com/kicad/code/kicad/-/issues/12736 ).
Fixes https://gitlab.com/kicad/code/kicad/issues/13686
2023-01-28 10:42:24 +00:00
52edbf91dc
Better synchronization of various ratsnest visibility controls.
2023-01-27 10:01:12 +03:00
b2f6c13b6a
Fp editor and Fp viewer: fix missing info on msg panel after loading a fp
...
Fix also duplicate/not used code
Fixes #11404
https://gitlab.com/kicad/code/kicad/issues/11404
2023-01-25 17:47:04 +01:00
b8352b07c5
PCB: Immediate mode copy should deselect if hover selecting
2023-01-19 09:45:47 -05:00
f45d44a639
Don't leave temp footprints attached to a board.
2023-01-18 00:46:59 +00:00
f0b2902b8c
Don't allow quit while zone filler is running.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13551
2023-01-16 16:01:45 +00:00
91c5bb9175
Block user-initiated zone-fill actions, but not system ones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13536
2023-01-15 19:16:36 +00:00
c530bdb5a1
Rename GetSelectMenuText to GetItemDescription
...
This descriptive text is used for many more things than
just the select menu these days.
2023-01-11 22:27:44 -05:00
2cbb66d70d
Dim other pads when in pad edit mode.
2023-01-06 11:13:57 +00:00
1ccd387c8d
Exit a group when selecting a component outside it
...
We had this filter in place when doing mouse selection, but not when
the selection comes from another tool event.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13398
2023-01-05 20:32:52 -05:00
126225866b
Don't add footprint components to PCB group
...
Footprint components are only group-able inside of the footprint editor
Fixes https://gitlab.com/kicad/code/kicad/issues/13396
2023-01-05 15:38:07 -08:00
7dfa100ff0
Correctly refresh the board after action plugin run and maintain
...
selection
2023-01-05 14:05:15 -08:00
cbe5340d37
Allow pads in multi-select mode when nothing else would be selected.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13371
2023-01-05 17:02:50 +00:00
67e6603699
Move updateUnits functionality to where it can be shared.
...
Also call it when adding a footprint via the chooser.
Fixes https://gitlab.com/kicad/code/kicad/issues/13340
2023-01-02 22:12:26 +00:00
07b4f88e6b
Pcbnew: Fillet Lines tool does not set line width and layer.
...
When fillet a polygon or a rect, the resulting lines and arcs had incorrect
width and layer.
Fixes #13338
https://gitlab.com/kicad/code/kicad/issues/13338
2023-01-02 16:52:08 +01:00
20f2232d4e
Adjust dimension units when placing footprints on board.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13339
2023-01-02 12:39:35 +00:00
e8114dc49a
Minor compil and Coverity warnings fixes.
2023-01-02 10:21:42 +01:00
16fd586c41
Do not prune items/layers when copying the clipboard to the FP editor: all are allowed
...
(Some are disabled only for GUI)
Fixes #13334
https://gitlab.com/kicad/code/kicad/issues/13334
2023-01-01 13:35:05 +01:00
4c63b4e061
Class name <-> file name sync.
2022-12-29 18:05:57 +00:00
4bb1b4a3d2
Router: settings dialog fixes
...
Make keyboard activation of OK save settings instead of cancelling.
Also, fix the string for the shortcut so that it works (shortcut
unchanged).
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13303
2022-12-29 10:31:12 -05:00
3b55f9e326
PCB Editor: Inform tools when selecting/unselecting net
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13308
2022-12-29 13:46:20 +00:00
411efe6f3d
PCB Editor: Allow mouse drag of group-of-groups
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13076
2022-12-28 15:23:52 -05:00
741d1e043a
PCB Editor: make Mirror menu items conditional
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13230
2022-12-27 14:18:47 -05:00
ee0a41e3bc
Remove excess calls to SelectedItemsModified
...
We really don't want to post these events unless the *selected* items
were actually modified, since it results in a redraw of the properties
panel (which disturbs edit state and causes flicker on MSW).
Now the COMMIT system is responsible for sending this event iff the
commit touches items that are selected.
Side note: UpdateMsgPanel is useless on every app except pl_editor, so
it can probably be refactored/removed at some point.
2022-12-26 20:57:58 -05:00
1f3727f548
Assigning a netclass has no meaning in fp editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13267
2022-12-26 20:33:04 +00:00
5dce8323e8
KIGFX::REPAINT is not enough if the item isn't in the view.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11656
Fixes https://gitlab.com/kicad/code/kicad/issues/13217
2022-12-24 17:18:22 +00:00
1cc9792cdb
Fix snapping dist when disabling grid
...
The disable grid hotkey should allow the snap scale to be completely
determined by the snapSize and world scale. This prevents snapRange
from overriding in the case where grid is disabled.
Additionally, we disallow grid snapping when the grid scale is not
visible. This means that when zoomed out sufficiently to not show the
minor ticks, these minor ticks will not override a snap
Fixes https://gitlab.com/kicad/code/kicad/issues/12303
2022-12-21 17:47:45 -08:00
47dc2379d8
PCB: Fix issues with grab unconnected
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13232
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13233
2022-12-21 15:10:19 -05:00
75053cfc57
Remove normally unused code from Move function.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13222
2022-12-21 19:06:32 +03:00
5d94d2634e
PCB Editor: make locking menu items conditional
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/5202
2022-12-21 10:34:54 -05:00
44ab6876d9
fp editor: remove useless "Unroute Selected" from context menu.
...
Fixes #13229
https://gitlab.com/kicad/code/kicad/issues/13229
2022-12-21 13:11:51 +01:00
bd24e85289
PCB: Add Copy With Reference to the Positioning Menu
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/11947
2022-12-20 11:54:05 -05:00
5327ea5823
Respect selectabiltiy when adding wholy-selected groups.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13092
2022-12-15 17:57:58 +00:00
279edcefdc
Don't break tracks without snap
...
If the user asks to not snap to a track, we should also prevent the
track from snapping to the via
Fixes https://gitlab.com/kicad/code/kicad/issues/13142
2022-12-14 13:51:42 -08:00
9d13e419c2
Reduce compiler warnings.
2022-12-13 00:47:19 +00:00
4fe35d0df1
More push/pop tool issues
...
We need to pop the move tool off when it doesn't find anything to act on
so that the pushed tools under it on the stack can re-activate
Fixes https://gitlab.com/kicad/code/kicad/issues/13114
2022-12-12 12:56:35 -08:00
96a9ec4a0c
Enhance compatibility with V6.0 for Intersheetrefs fields associated to GLOBAL labels.
...
In V6.0, the identifier is "Intersheet References" and was not immediately
seen as Intersheetrefs field.
2022-12-12 16:38:04 +01:00
45eae3e594
Don't Simplify() polys with arcs in them.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13134
2022-12-12 12:54:34 +00:00
5e8227b54a
pcbnew: Support dragging arc center in "Keep endpoints" mode.
2022-12-12 13:00:44 +03:00
3eb31befed
Fix a delay when dragging arc endpoints in pcbnew.
2022-12-12 09:39:56 +03:00
da1e5a80a8
Restore removeCorner transition in PCB editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13133
2022-12-12 07:04:20 +03:00
b01d950071
Remove start pt when collinear with neighboring pts in zone/poly draw.
2022-12-10 06:21:54 +03:00
b4b25a7009
Fix Pack & Move footprints when working with groups.
2022-12-09 20:42:35 +03:00
c1f82d0c80
Canceling Move cancels Pack too in Pack & Move footprints.
2022-12-09 20:41:56 +03:00
3d2b1aaf90
Improve H/V/45 deg mode when drawing zones and polygons.
2022-12-09 19:11:56 +03:00
0e75bf02fa
Selection: refactor modifier checking
2022-12-08 14:12:12 -05:00
6d513e7ecf
Expose changing arc edit mode in arc button context menu and Preferences
...
Ctrl+Space can still be used to cycle through modes.
Fixes https://gitlab.com/kicad/code/kicad/issues/5412
2022-12-05 21:28:16 +03:00
ef83d01455
Minor string changes: "eeschema" / "pcbnew" in tooltips, and power port terminology
2022-12-04 14:29:57 +00:00
96819f6c01
Better cache invalidation for text objects with references.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13059
2022-12-04 11:51:44 +00:00
0bc06d506c
Properties: reselect after canceled move
2022-12-02 21:40:21 -05:00
93c631af44
drawing_stackup_table_tool: fix incorrect color of dielectric sublayers.
...
when a dielectric has sublayers, the printed color was always the main layer color.
2022-12-02 10:41:20 +01:00
20791c99ac
Allow conversion of single track segments and vias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13047
2022-12-01 17:15:29 +00:00
6befa1c57e
A bit of cleanup to recent convert tool changes.
2022-12-01 14:53:13 +00:00
4d8e73a630
Allow tracks as input to bounding hull generation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13047
2022-12-01 14:53:13 +00:00
b31349b679
Get consistent point for gfx import
...
TopLeftItem() should always return same element for our import
Fixes https://gitlab.com/kicad/code/kicad/issues/13041
2022-11-30 12:25:34 -08:00
cf33f33899
Standardize placement tool modifiers
...
PlaceImage, PlaceImportedGraphics and PlaceText need to handle the grid
and hotpoint snapping as well as the modifiers to disable them
2022-11-30 10:57:42 -08:00
3c4c4e5166
Remove shortened debug time from zone refill message.
...
Also adds a time-out for it.
2022-11-30 17:38:02 +00:00
074c087c21
Allow disabling of grid snapping while placing imported image.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13040
2022-11-30 14:38:22 +00:00
98ab078905
Remember conversion strategy.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13043
2022-11-30 14:29:16 +00:00
17bb57cc73
PCB: fix stale ratsnest between moves in Move Individually
2022-11-30 09:11:37 -05:00
8dbd6fee00
Go back to smaller chaining epsilon.
...
Using a large epsilon here to allow for sloppy drawing can cause
the algorithm to miss very short segments in a converted bezier.
So use an epsilon only large enough to cover for rouding errors in
the conversion.
Fixes https://gitlab.com/kicad/code/kicad/issues/12951
2022-11-30 13:26:45 +00:00
19eab62516
More safety around ratsnest state.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13011
2022-11-30 13:00:21 +00:00
9fa8b9e49f
Fix memory leak and re-code non-memory-leak so Coverity can understand it.
2022-11-30 13:00:20 +00:00
8c468dcffc
Use ecoords for distance comparison in PCB grid helper.
...
Fixes a bug where a cursor would jump to a far location while hovering
over some 45-degree tracks.
2022-11-30 08:18:19 +03:00
41ca2789a6
Get rid of shadowing warning
2022-11-29 18:12:39 -05:00
abd818a426
Update msgpanel after entering or exiting group.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13031
2022-11-29 21:33:04 +00:00
31eb91e9e5
Infobar for slow zone auto-refill.
2022-11-29 21:09:16 +00:00
b6bd74d822
Replace single zone fill under "draft" terminology.
...
Also sets Autofill Zones to default to on.
2022-11-29 18:13:36 +00:00
ad6ef35c9f
PCB: Add skip action to Move Individually
2022-11-29 15:42:03 +00:00
b2177718a1
Tighten up refresh logic for net & netclass references.
...
Also tightens it up a bit for text variables which can reference things
like netnames and netclasses, but also board settings.
Fixes https://gitlab.com/kicad/code/kicad/issues/13032
2022-11-29 15:18:36 +00:00
8165fc6c44
Give up trying to infer what kind of polygon the user wants.
...
In many instances there are 3 valid answers: mimic linewidths, use
centerlines, and build a bounding hull.
Fixes https://gitlab.com/kicad/code/kicad/issues/12950
2022-11-28 22:12:53 +00:00
4a4fab78a3
PCB: allow swap while moving
2022-11-28 14:16:08 -05:00
3042633f4a
PCB: block unroute and move individually when already moving
2022-11-28 14:16:08 -05:00
64f315c649
Move properties panel to widgets with the other AUI panels
2022-11-27 22:40:23 -05:00
ec9c6a8053
Separate creation of polygons for open and closed shapes.
...
This allows us to create a bounding hull from an open shape-line-chain,
which is useful for defining milled slots.
2022-11-27 18:29:41 +00:00
8c7691fbc3
Harmonize on "Manager" for now, since we use that in the docs
2022-11-25 09:13:23 -05:00
bbea5b3fbc
Save and restore properties and search panel sizes
2022-11-25 09:11:30 -05:00
47d86e5d9e
Don't crash when canceling graphics import
...
Grouped graphics need to have their group removed from the preview
before deleting the elements to avoid reading freed memory when
redrawing
2022-11-23 16:21:06 -08:00
8b1ffca7fa
Better reporting of nets and netclasses.
2022-11-22 14:54:08 +00:00
97fd99ec99
Re-resolve netclasses after assigning netclass to pattern.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12965
2022-11-22 14:54:08 +00:00
226529235c
Mostly const safety, but also performance opt. by avoiding shared_ptr overhead.
2022-11-22 12:21:30 +00:00
3b31955d98
Get hit test in group members
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12957
2022-11-21 09:28:49 -08:00
01138a2e19
Fix fillet action for lines
...
Generalize fillet action behavior to all straight lines in pcbnew
Fixes https://gitlab.com/kicad/code/kicad/issues/4742
2022-11-21 07:01:14 -08:00
c1510f07d8
Fix some issues with group bounding boxes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12958
2022-11-20 23:57:36 +00:00
0120df014e
Give group the right parent when pasting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12954
2022-11-20 22:52:06 +00:00
12a55f20d3
Fix a mistake in grip margin.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12952
2022-11-21 00:25:19 +05:00
dd2f19ca5f
Allow router cursor snapping to points on the arc.
...
Also don't disable grid snapping when holding Shift over arcs.
2022-11-20 16:56:25 +05:00
110bc6abd1
Fix router cursor glitching on H/V track segments.
...
Also don't disable grid snapping when holding Shift over tracks.
2022-11-20 16:56:25 +05:00
38fd1c9985
pcbnew: Improve performance when something is selected.
2022-11-19 01:53:30 +05:00
c409646aad
Update message panel after rebuilding connectivity.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10122
2022-11-18 15:29:16 +00:00
bba6d503d4
Don't keep value of user or grid anchors between invocations.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12065
2022-11-17 00:51:52 +00:00
cefc5268ab
Allow pads in selection and filter them for free-pads later.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12912
2022-11-16 18:37:40 +00:00
9724f6e736
Don't allow zone filling during other editing operations.
...
It's a very heavy op, and is likely to violate all manner of
assumptions the other ops make.
Fixes https://gitlab.com/kicad/code/kicad/issues/12736
2022-11-14 23:39:49 +00:00
f51db4e093
Fix some Coverity and compil warnings.
2022-11-14 09:02:40 +01:00
9d8fdd8d53
Fire selection events from SelectAll().
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12896
2022-11-13 22:59:21 +00:00
7089e99f4b
Integrate move individually into move algo so other commands don't choke.
...
Also adds commands to cancel and finish move individually.
Fixes https://gitlab.com/kicad/code/kicad/issues/12750
Fixes https://gitlab.com/kicad/code/kicad/issues/12749
2022-11-13 13:18:42 +00:00
248181e62d
Fix Coverity and compil warnings.
2022-11-12 16:02:24 +01:00
d9987e9569
Orig_items will have been invalidated by Revert.
...
Don't use it to rebuild the selection. Use the board_item flags instead.
Fixes https://gitlab.com/kicad/code/kicad/issues/12882
2022-11-11 22:57:38 +00:00
138f835672
Retire group bbox cache.
...
It's too hard to maintain when changes to other items (the groups
members) affect it.
2022-11-11 20:31:31 +00:00
3fc727bb91
Clear selection before deleting objects during conversion.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12879
2022-11-11 17:53:01 +00:00
03ba14c6d3
Tighten lifecycle management of parent group pointers.
...
Also adds some debugging to try to catch dangling pointers.
Also adds a cache for group bounding boxes (which will be expensive
to calculate for large groups).
Fixes https://gitlab.com/kicad/code/kicad/issues/12875
2022-11-11 17:27:28 +00:00
0b4fc8f50d
Fix bugs in PCB arc editing.
2022-11-11 15:00:36 +05:00
46d4861187
Use the 45-degree limit button to apply alternative constraint.
2022-11-11 15:00:36 +05:00
8b0f3f1ee7
Set keeping the center as the default arc editing mode.
2022-11-11 15:00:36 +05:00
3f63f9fc57
Don't prune inner layers of through-hole parts.
...
For historical reasons we've always included ALL inner layers in these
items and changing that has uncovered several latent bugs. Rather
than find all the rest this late in the game, I went back to storing
all inner layers, even those the board doesn't currently have.
Fixes https://gitlab.com/kicad/code/kicad/issues/12863
2022-11-09 15:58:14 +00:00
4066850f37
Use event point to determine if we're still in draggable item.
2022-11-09 13:09:01 +00:00
056f45cd70
Fixup most intersecting polygon points
...
Remaining is the intersecting complex pad, so this keeps the error
message when drawing
Fixes https://gitlab.com/kicad/code/kicad/issues/12806
2022-11-08 16:05:04 -08:00
2cfe78170c
Honour selection filter when picking move anchors.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12773
2022-11-08 16:27:18 +00:00
cb3d215b6a
Fix compil and Coverity warnings.
2022-11-08 11:53:13 +01:00
be8bbcaac3
Send Selected event even if the result is an empty selection.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12849
2022-11-07 19:47:51 +00:00
b5f62da5d9
Respect synthetic layer visibility when selecting footprint texts.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12850
2022-11-07 19:26:14 +00:00
ae741b93e6
Resore push/pop-less PickerTool.
...
(Functionality was accidentallly lost when we removed the opt command
strings.)
2022-11-07 19:11:12 +00:00
0b3ecdd968
Revert "Fix handling of self-intersecting polygons"
...
This reverts commit ed309e20da
2022-11-07 09:41:56 +00:00
dd94b2d3a7
Rename PROPERTIES to STRING_UTF8_MAP for clarity
...
This class has nothing to do with the properties system
2022-11-06 11:51:52 -05:00
bb618f2d55
Update pointEditor after cancelled move.
2022-11-05 16:50:54 +00:00
8bc9d456c3
Fix area selection calculation
...
area was a double value for comparison of large numbers. But the
promotion from int happened after the multiplication (and overflow) for
large images
Fixes https://gitlab.com/kicad/code/kicad/issues/12821
2022-11-03 11:46:40 -07:00
ed309e20da
Fix handling of self-intersecting polygons
...
We allow temporary self-intersection but before committing, we reduce
the polygon to a single outline (optionally with holes)
Fixes https://gitlab.com/kicad/code/kicad/issues/12806
2022-11-01 13:09:11 -07:00
c7c4439027
Allow bezier->line/poly conversion
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12778
2022-10-31 12:48:53 -07:00
3b3e6de515
Disable mirror commands when a single footprint is selected.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12752
2022-10-28 19:20:24 +01:00
6a0db3e7e2
Fix Coverity warnings.
2022-10-26 14:39:44 -04:00
960c92634f
Improve logic of Position Relative tool
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12672
(cherry picked from commit 2d2912c23d
2022-10-24 18:47:38 -04:00
d16b23d16e
Name shortening and line-break reduction.
2022-10-21 18:41:39 +01:00
e3842514e7
Move courtyard collision setting to preferences.
...
Also cleans up PCBNew/FPEditor edit options panel to be more in sync
with each other.
2022-10-19 11:33:11 +01:00
403cc50e7c
Don't exit group when the cancel went to another tool.
...
Also fixes a bug where the group border didn't get updated immediately
on enter/exit.
Fixes https://gitlab.com/kicad/code/kicad/issues/12669
2022-10-18 17:53:06 +01:00
4633d251a5
Remove single-zone-fill and unfill.
...
These are incompatible with our zone-priority-based algorithms.
2022-10-18 13:45:28 +01:00
598b09821a
Coverity fixes.
2022-10-17 15:30:20 -04:00
46752499df
We need both a tool-oriented delete and one that doesn't push/pop, etc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12600
2022-10-17 13:21:07 +01:00
e9f8454a67
No DRC engine in footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12658
2022-10-16 18:39:37 +01:00
4af98827fd
Revert change for 11299, and update removed-pad items after zone fills.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12645
2022-10-15 16:06:57 +01:00
697056fa7e
Correctly sort positions for default align
...
When not aligning under mouse cursor, choose the X-most element where X
is top/bottom/left/right. Previous sorting was not correct for two
directions
Fixes https://gitlab.com/kicad/code/kicad/issues/12627
2022-10-14 16:15:06 -07:00
de5980b92e
Share more of the courtyard collision highlighting code.
2022-10-14 10:42:07 +01:00
11dc5424cb
Pull interactive courtyard checker out of move tool to share with router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-14 00:48:37 +01:00
8f1b4a9c03
Include cleanup.
2022-10-13 23:15:41 +01:00
8b9cbd5805
Don't reset editPad if it still exists after model reset.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12630
2022-10-13 00:07:30 +01:00
d0d625dcb5
BOARD_INSPECTION_TOOL::LocalRatsnestTool(): set a suitable cursor when activated.
2022-10-12 15:56:41 +02:00
83310659fd
Basic geometry: R != D.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12601
2022-10-10 19:18:37 +01:00
8470b178cd
Use actual pad shapes or built outline instead of effective shpaes for anchors.
...
The effective shapes don't work very well in the custom pad or rounded
rectangle cases, and they're somewhat slower in some of the other cases.
Fixes https://gitlab.com/kicad/code/kicad/issues/12601
2022-10-10 18:11:32 +01:00
79dabdd484
Fix typo.
2022-10-07 23:52:47 +01:00
04fec5016b
Add keepout zones set to keepout footprints to footprint courtyard checker.
...
(This is for the move tool, not DRC. DRC uses more sophisticated keepout
processing which is too slow for the move tool, and doesn't let us know which
keepout area collided for collision highlighting.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-07 22:23:37 +01:00
165654f114
Expose Switch Arc Posture in context menu.
2022-10-07 08:28:13 +03:00
d26b59a0bf
Improve arc construction using angles from arc geometry manager.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11713
2022-10-07 06:51:00 +03:00
22917860ef
Move Enter Group for easier access.
2022-10-07 03:03:33 +03:00
f818f3a445
Fix footprint rule and zone area anchors
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12575
2022-10-06 15:29:18 +00:00
436d75e7f9
Try to reconcile SELECTION and BRIGHTENED use of overlay.
...
For some reason the overlay doesn't get redrawn during the PCBNew
selection disambiguation menu, so we need to not hide BRIGHTENED
items.
Fixes https://gitlab.com/kicad/code/kicad/issues/12547
2022-10-04 17:01:56 +01:00
524a43f95e
Don't select footprints on the wrong side if not visible.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12483
2022-10-04 13:22:06 +01:00
ba630971af
Possible fix for move/esc/esc crash.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12553
2022-09-30 23:05:55 +01:00
6a6ef9b1f4
Bring adding-to-group and hiding in sync.
2022-09-30 16:45:00 +01:00
c1da59b560
Swap: disallow swapping tracks / wires
...
Also fix missed shortcut change for S -> Shift-S
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12538
2022-09-29 17:04:43 -04:00
d67437a2aa
Move ratsnest exclusion processing to a post-pass.
...
Also fixes a few cases where we were unnecessarily rebuilding
connectivity more than once for an operation.
2022-09-29 17:08:49 +01:00
9894acea76
Spelling
2022-09-28 17:09:43 -07:00
4095172259
ADDED: Pack and Move Footprints, improved footprint spread algorithm.
2022-09-28 13:37:23 +00:00
3a7068b346
Iterate on a copy of the selection since we're going to delete from it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12484
2022-09-27 23:54:19 +01:00
700edb95e3
PCB Actions: Grab Unconnected
...
Grabs the nearest unconnected item for each selected footprint/pad.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/1986
2022-09-26 16:17:41 -04:00
f4a3062684
PCB: Select Unconnected
...
Selects the all unconnected items for each selected routable item.
2022-09-26 16:17:41 -04:00
e66393c4dd
PCB Tools: Move Individually
...
Allows moving a selection of components one by one.
2022-09-26 16:17:41 -04:00
2490ad1458
Fix search panel not remembering visibility
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12494
2022-09-25 11:56:41 -04:00
59d62f7df1
Untangle some includes
2022-09-25 11:37:06 -04:00
7e71dc084c
Implement Mirror H/V for tracks and vias.
...
While not that often useful, it's really annoying that it doesn't work
when you *do* find a use-case for it.
Fixes https://gitlab.com/kicad/code/kicad/issues/6853
2022-09-24 19:55:48 +01:00
328cc27020
Add pad-recombining to FPEditor's Cleanup Graphics.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12487
2022-09-24 19:34:06 +01:00
28f836ab5c
Fix overzealous string replacement
2022-09-23 10:56:58 +02:00
897135a4f0
Support mirroring on the board too.
...
Also fixes a few bugs in FP item mirroring.
Fixes https://gitlab.com/kicad/code/kicad/issues/2168
2022-09-22 15:05:58 +01:00
8eb68ee472
Add pin/unpin context menu to Symbol Chooser and Footprint Chooser.
...
Also moves some more code down into common so it can be shared.
Fixes https://gitlab.com/kicad/code/kicad/issues/12384
2022-09-21 14:45:12 +01:00
513fc872bb
Support both X and Y mirroring in FPEditor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12409
2022-09-21 00:16:27 +01:00
0150655ed3
Fix missing DRC check with via
...
When the via is first and not second in our ordering, the hole-copper
clearance was not checked as the track did not have a hole.
We also calculated the NPTH-via clearance incorrectly in the inspector
2022-09-20 13:43:01 -07:00
64a6fc0fd4
Push UNITS_PROVIDER down into a low-level mixin.
...
This allows us to also construct cheap UNIT_PROVIDERs for specific
tasks when necessary.
2022-09-19 17:10:59 +01:00
5990595619
When adding a bitmap, do not clone it during moving.
...
Cloning is not necessary, and is memory consuming.
2022-09-19 17:41:47 +02:00
ca0c9f12e0
PCB Editor: Unroute Footprint
...
Also works on selected pads.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/1955
2022-09-19 10:37:10 -04:00
9304607624
TOOL_EVENT: make command string non-optional
...
We're getting segfaults in places where this isn't checked. Also, add
some asserts so we can catch bad tool push/pop.
Removes all uses of GetCommandStr() and makes it private.
2022-09-19 10:23:09 -04:00
45d6b4a9fc
Readability improvements.
2022-09-19 11:18:20 +01:00
1566bd8b14
Make sure a collector has a guide before handing it to a client filter.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12460
2022-09-18 18:14:47 +01:00
3d5913c825
Remove convert_to_biu.h, merge contents to base_units.h
2022-09-16 21:09:28 -04:00
66e8931405
Remove IU_PER_MM thats standalone
2022-09-16 21:09:27 -04:00
e6ed275c25
Repoint IU_PER_MILS
2022-09-16 21:09:26 -04:00
a8613ee80f
Combine Iu2Millimeter & remove PcbMm2iu
2022-09-16 21:09:26 -04:00
107f409106
Use router's connectivity algorithm, not CONNECTIVITY_DATA's.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10745
2022-09-16 22:49:20 +01:00
d9f75556bd
Fix old copy/paste error (from 2017, believe it or not).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11487
2022-09-16 11:25:27 +01:00
b00178adb3
Nuke base_units from orbit
2022-09-16 04:38:10 +00:00
ce9adeaf51
Don't set FreeVia when we can't find a net.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12421
2022-09-15 23:16:08 +01:00
0180bcf90a
ADDED: Implement Drag and Drop
...
dropping files to Kicad manager :
*.kicad_pro, *.pro -> open project;
gerber and job files -> open in Gerbview editor;
Eagle and Cadstar files -> open project.
dropping file to schematic editor -> append schematic;
dropping library file to Symbol editor -> add library;
dropping board file to PCB editor -> append board;
dropping library or footprint file to Footprint editor -> add library or import footprint;
dropping ZIP file or gerber files to Gerbview editor -> open files;
dropping sheet file to Drawing Sheet editor -> open sheet.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11638
2022-09-14 22:28:09 +00:00
2d3b8d6393
Fix logic around Select All inside an entered group.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12411
2022-09-14 12:24:51 +01:00
281b9d405a
ADDED ability to specify where pad number (& net name) go on custom shaped pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6627
2022-09-14 11:37:20 +01:00
f91487aa36
Don't overwrite titleblock and pageinfo when appending board.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11650
2022-09-14 11:37:20 +01:00
f304e2d4f6
ADDED: Search/inspect pane
2022-09-14 02:59:57 +00:00
1a023f5dd0
PCB Editor: (Auto)Route Selected (From Other End)
...
3x Selection-Based Routing Tools. Takes a selection of routable objects
and routes them one at a time individually, with an attempted finish, or
from the other end, depending on the action given.
2022-09-13 15:06:36 +00:00
0a5ca5b485
Display crosshairs in picker tools.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10183
2022-09-13 01:40:43 +01:00
c2643f53cf
Tighter control over lambda capture.
2022-09-12 20:51:15 +01:00
eaccd40c75
Allow vias to connect <no net> tracks even when DRC checking is on.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12403
2022-09-12 20:38:21 +01:00
37d2addf0e
Icons: add swap
2022-09-12 11:11:49 -04:00
f70e1d0f22
SCH/PCB: Set Swap hotkey to 'S'
...
* Move Add Sheet to Shift+S in Schematic Editor
* Move Set Grid Origin to Shift+S in PCB Editor
2022-09-12 11:11:49 -04:00
de6e368ac6
PCB: Swap Tool
2022-09-12 09:39:43 -04:00
9cf3c529d3
Apply the same accuracy band to connectivity as we use for hittesting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10745
2022-09-09 21:42:21 +01:00
5b3bd9be83
Prune pasted data of non-enabled layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11997
2022-09-09 21:02:08 +01:00
98e760da93
Coverity-suggested improvements.
2022-09-09 13:41:13 +01:00
2743fd583f
More improvements to drag tool selection disambiguation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10745
2022-09-08 23:43:07 +01:00
a619ef9d53
Improve drop-a-knee-selection-to-a-single-segment algorithm.
...
In particular, don't rely on there being only two items in the
collector at the start.
Fixes https://gitlab.com/kicad/code/kicad/issues/10745
2022-09-08 14:10:18 +01:00
6b3d36b6c3
CONVERT_TOOL: also show the "Create From Selection" menu if a array can be created
...
The "Create Array" sub-menu was recently moved to this menu, so it must me
shown as soon as an array can be created.
2022-09-07 10:53:27 +02:00
d67c81a657
When deselecting items, pick only selected ones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10292
2022-09-06 19:44:29 +00:00
963a17f5b5
fix a compil warning
2022-09-05 18:33:17 +02:00
895a8a8dbc
Work around focus issues for status popups.
...
Autoscroll wasn't working on Mac because the status popup's panel
has the focus. This *may* also fix a problem on MSW of the auto-scroll
not being cancel-able.
Fixes https://gitlab.com/kicad/code/kicad/issues/11425
2022-09-04 21:08:01 +01:00
efae2bbb4c
Better feedback for netclass assignment patterns.
2022-09-03 21:33:56 +01:00
c30a557810
ADDED netclass assignment from PCB canvas.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5975
2022-09-03 19:29:59 +01:00
09773e3e2e
Make sure dirty flag gets set, and leave save enabled regardless.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11824
2022-09-01 14:27:16 +01:00
9188838e50
RIP EDA_RECT.
2022-08-31 23:57:24 +01:00
b4492e0bd2
More EDA_RECE yeetage.
2022-08-31 17:19:50 +01:00
ebe9617e77
More EDA_RECT expungification, and an attempt to fix the python test.
2022-08-31 17:19:48 +01:00
5679b9dbdc
Remove a few EDA_RECT instances.
2022-08-31 01:22:49 +01:00
0c8787cbb9
Some more wxPoint/EDA_RECT yeeting.
2022-08-31 00:44:33 +01:00
b736460e71
Move optional access from value() to *operator
...
`value()` throws. Where we check for existence, we don't need to use
the throwing version and should just use the unprotected variant
2022-08-30 13:59:39 -07:00
a176bf383e
Properties: pick up single selections
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12302
2022-08-30 13:59:37 -04:00
91fbb5c957
Don't prevent immediate actions while router active
...
Immediate actions that can take place are useful. We should only be
preventing immediate actions while actively routing or dragging
Fixes https://gitlab.com/kicad/code/kicad/issues/12311
2022-08-30 10:31:29 -07:00
63386ba64d
Pointer safety for ERC/DRC dialogs.
...
Also makes the "Edit ingored violations" easier to find.
Fixes https://gitlab.com/kicad/code/kicad/issues/12308
2022-08-30 12:07:19 +01:00
2d68cdff94
Better reporting of hole-to-hole clearances and clearance resolutions.
2022-08-29 17:37:49 +01:00
b886ec728e
Copy shape data when converting PCB TEXTBOX to FP.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12298
2022-08-28 21:34:13 +01:00
3b4c5f0dc4
French translation update
2022-08-27 09:10:02 +02:00
09511d176c
Quiet Coverity.
2022-08-26 17:05:25 +01:00
06786c34d7
Blacklist hashes for 2d integer elements
...
The hash table for integer hashes is extremely limited and places most
elements in the same buckets. This leads to a linear search time for
structures built on this.
This blocks hashes, directing the coder to utilize std::set or std::map
structures instead of hash tables for implementing integer-based
lookups.
2022-08-26 08:43:37 -07:00
f1261e71d4
Replace boost::optional with std::optional
2022-08-25 15:50:47 -07:00
fb74bdb059
Don't consider rule area zones in priority calc
2022-08-25 10:12:58 -07:00
e661545ecf
Choose the first unused priority value for zones
...
Default the new zone priority value to the lowest available unused
priority. Ensures that, by default, a new zone has a unique priority
level preventing zones from unintenionally shorting
2022-08-25 10:05:30 -07:00
418df36790
Avoid teardrops in priority calculation
...
When choosing a new priority value, don't look at teardrops (which have
high priority)
2022-08-25 08:41:14 -07:00
3e4cfab254
Set new zone priority to unique number
...
Previously new zones' priorities were all set to 0. This is almost
always wrong and can lead to unintended conflicts. The new zone default
value is now set to one higher than the largest number on the board.
This is a better default value because it will not conflict with
existing values.
2022-08-24 16:37:57 -07:00
1871812f2b
Consolidate on a more widely used sub-type architecture.
2022-08-23 12:57:55 +01:00
f6f6ebd5f9
WIP: Properties GUI
2022-08-22 21:32:32 -04:00
1e68c353f1
Account for groups in undo of Position Relative To.
...
Also fixes a bug were pads weren't correctly being found for anchoring
the selection before the Position Relative To.
Fixes https://gitlab.com/kicad/code/kicad/issues/11793
2022-08-22 22:33:38 +01:00
3a76d42630
Cross-probing/selection for multiple items (PCB -> SCH)
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10469
2022-08-22 19:33:39 +00:00
03454684fa
Commenting.
2022-08-22 12:43:57 +01:00
4f0136db3b
Attempt to fix std::initializer_list lifetime issue.
2022-08-21 20:54:41 +01:00
28f7221cc3
Allow selection of Footprint Checker markers.
...
(And do a cross-probe to the Footprint Checker dialog.)
2022-08-20 11:30:25 +01:00
aa2ad3b44c
Move KICAD_T[] to std::initializer_list<KICAD_T>.
2022-08-20 10:28:11 +01:00
46df421064
ADDED defined pad groups for net-tie footprints
...
Each pad group is allowed to short nets with other pads in its group.
Legacy footprints with the "net tie" keyword hack will get a single
group auto-created with all the footprint's pads in it.
DRC and the router now allow a track to collide with copper graphic items
while entering a net-tie pad as long as the closest point in the collision
is within the pad.
DRC (and the footprint checker) now check for copper items in the
footprint shorting pads which are not in the same pad group.
Fixes https://gitlab.com/kicad/code/kicad/issues/2265
2022-08-19 18:54:20 +01:00
a60053c800
selectAllItemsOnSheet(): fix a typo that prevent selection of items in root sheet.
2022-08-19 11:12:16 +02:00
e0fbe2542f
Fix a few compil and Coverity warnings.
2022-08-19 10:53:29 +02:00
f06e28b7a7
PCB: Finish Route, Route From End
...
Adds restart routing from other ratsnest' end and automatically finish
routing.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/5051
2022-08-17 03:15:46 +00:00
371f6d917f
Use VECTOR2I::extended_type instead of long, and int for numeric limits.
2022-08-16 12:08:55 +00:00
405be8d15f
Bounds-awareness in Move, Rotate, point editor, drawing tool
2022-08-16 12:08:55 +00:00
b81a3f0533
GetClampedCoords: Better usability for rounding
2022-08-16 12:08:55 +00:00
4d7d367b25
Use KiROUND for BBox calculation, change parameter name, block negative padding.
2022-08-16 12:08:55 +00:00
759e1a64ef
Fix broken const ref in wildcard
2022-08-15 12:09:30 -07:00
35ac39844f
Clean up some auto usage
...
Don't make new copies of shared_ptr if we can use references. Keep auto
usage down to hard-to-type-out sequences
2022-08-15 11:29:45 -07:00
1f347582f8
Introduce new marker type so we can track DRC errors on the drawing sheet.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12221
2022-08-15 18:03:03 +01:00
a9536b5de9
CHANGED netclass assignments now done via canvas or via patterns.
2022-08-14 22:56:29 +01:00
d6cd55e133
ADDED esc-removes-net-highlight preference to PCBEditor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8760
2022-08-09 08:46:12 +01:00
ea914eac9a
Pcbnew: fix regression: Display board info when clicking on a empty place.
...
Previously: the displayed info was "Selected Items 0".
2022-08-05 13:49:01 +02:00
96f01d33c8
Performance improvements.
...
1) Move a bunch of std::map's to std::unordered_map to get constant-time
look-ups
2) Lengthen progress-reporting intervals to spend more time doing work
and less time talking about it
3) Reverse order of SHAPE_LINE_CHAINs in thermal intersection checks to
make (much) better use of bbox caches
4) Don't re-generate bboxes we already have
5) Fix some autos that weren't by reference (and were therefore copying
large datasets)
6) Rename delta progressDelta so it's easier to search for in future
7) Get rid of a few more autos (because I don't like them)
8) Pass large items to lambdas by reference
Fixes https://gitlab.com/kicad/code/kicad/issues/12130
2022-08-03 11:59:42 +01:00
43df863df2
Fix issue with caches not being initialized when printing msg bar.
2022-08-01 13:09:51 +01:00
0304ad4494
Move connection width testing to rule system.
...
Also copies connection width progress reporting architecture over to
the sliver checker.
2022-08-01 13:09:51 +01:00
927bc8141b
Init member variables.
2022-08-01 13:09:51 +01:00
54213bb7f1
Cleanup and move to DRC_ENGINE's status reporter.
...
1) brace formatting
2) get rid of some autos
3) get rid of a dyn_cast that CLion claims is bad
4) use DRC_ENGINE's status reporter
2022-08-01 13:09:51 +01:00
6f49b57f9b
Cleanup & performance enhancements.
2022-08-01 13:09:51 +01:00
a8505d9c76
SEARCH_RESULT -> INSPECT_RESULT
...
To fix the name squatting it's doing for future functionality
2022-07-29 20:01:10 -04:00
f0b9e67212
Add ignore-line-widths mode to CONVERT_TOOL.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5911
2022-07-29 21:39:03 +01:00
fc1afa6298
Improvements to convert tool.
...
1) Handle filled shapes
2) If a chained outline can't be found, build hulls of the individual
segments
3) Combine intersecting shapes
4) Simplify code
Fixes https://gitlab.com/kicad/code/kicad/issues/git
Fixes https://gitlab.com/kicad/code/kicad/issues/5911
2022-07-27 18:57:45 +01:00
2bf33321d1
Update constraint mode in status bar during move.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10465
2022-07-27 18:57:45 +01:00
aabc3b3cc6
FP editor: fix crash when duplicating a footprint.
...
Fixes #12098
https://gitlab.com/kicad/code/kicad/issues/12098
2022-07-27 19:08:27 +02:00
cb6a2552d9
Use the FPEditor's status bar messages for FPBrowser.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11404
2022-07-26 18:45:02 +01:00
4d48376eae
Fix some warnings detected by PVS-STUDIO (not used vars)
2022-07-26 16:00:14 +02:00
1bad72f14f
Remove bad static_cast.
...
(m_settings isn't a PCBNEW_SETTINGS in non-PCB_EDIT_FRAMEs)
2022-07-24 23:41:41 +01:00
c16d0603c6
Add fix missing in my commit 8eee7667
2022-07-24 09:10:51 +02:00
8eee766791
Fix Cvpcb DISPLAY_FOOTPRINTS_FRAME: some display options not working. Commit 5e4a7041 moved 4 settings used in Cvpcb to a PCBNEW_SETTINGS struct. But in Cvpcb, this config struct does not exist. So these 4 settings are now moved to a section (PCB_VIEWERS_SETTINGS_BASE) common to Cvpcb and Pcbnew config.
2022-07-23 18:45:13 +02:00
9dd3bbf2cb
Change highlight net hotkey default.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12051
2022-07-23 12:34:48 +01:00
f41af10007
Clean up hole shapes for safety (smart pointer) and consistency.
2022-07-22 23:06:07 +01:00
5442d284f4
Improve strings for highlight net commands.
2022-07-22 09:31:11 +01:00
def87c969e
Redo the pinned-libraries storage architecture.
...
1) always use preferences directly
2) allow nicknames from either preferences or project
3) store-after-modify
Fixes https://gitlab.com/kicad/code/kicad/issues/12000
Fixes https://gitlab.com/kicad/code/kicad/issues/11892
2022-07-22 09:31:10 +01:00
b80fd5329d
Clear dimension pointer after committing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11864
2022-07-22 09:31:09 +01:00
004abcd370
Leave originally selected items selected after cancelled move.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12024
2022-07-22 09:31:08 +01:00
16e3d40552
ADDED: Display calculated clearance in status bar
...
In addition to showing resolved clearance, we also show the calculated
clearance in the same method as is used for DRC. This will allow users
to better examine their system while working.
Fixes https://gitlab.com/kicad/code/kicad/issues/7934
2022-07-21 15:44:48 -07:00
49bf717c0e
fix minor compil warnings
2022-07-17 20:29:59 +02:00
2de10080cd
Add edge and margin clearances to message panel.
2022-07-15 16:14:32 +01:00
c98826c8b0
Open newly-pasted footprint on canvas of Footprint Editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11398
2022-07-15 14:13:39 +01:00
99f8b21ed1
PCB: Add bitmap layer per board layer
2022-07-14 11:23:23 +00:00
3669cb4673
PCB Editor: Add User Background Images
2022-07-14 11:23:23 +00:00
b5bf1da251
Keep track of blocking windows
...
Allows the calling KiWAY player to send messages to the blocking window
before signaling a separate call
Fixes https://gitlab.com/kicad/code/kicad/issues/11891
Fixes https://gitlab.com/kicad/code/kicad/issues/11772
2022-07-13 19:25:24 -07:00
20a372ff69
ADDED Clearance data in PCB editor status bar
...
When selecting two objects, display the resolved clearance and
(optionally) hole clearance in the status bar
2022-07-13 15:04:32 -07:00
e87ba10a5a
Enforce group selection to abide by L/R behavior
...
When selecting greedy (right to left), selecting any part of the group
will get the whole group. When selecting left to right, we must select
all items in the group to get the grouped items unless we are in the
group itself
Fixes https://gitlab.com/kicad/code/kicad/issues/11902
2022-07-12 11:01:34 -07:00
57acce9e55
Share more code between selection tools.
2022-07-11 19:04:08 -06:00
aaf99eb0cc
Performance optimizations.
2022-07-11 21:25:12 +00:00
19b4844102
Avoid OSX system shortcut.
...
CHANGED toggle net highlight from ctrl-` to opt-`.
Fixes https://gitlab.com/kicad/code/kicad/issues/10160
2022-07-10 20:20:22 -06:00
e122dc38bd
Add context menu item for clearing net highlighting.
...
In selection tools, drawing tools, router tool, line_wire_bus tool.
Fixes https://gitlab.com/kicad/code/kicad/issues/11920
2022-07-10 17:15:20 -06:00
654740b90d
Add newly-drawn objects to any entered group.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11912
2022-07-08 17:27:05 -06:00
8a9bf02b7e
Smarten up silk clearance & tented item handling.
...
The inspection tool will report whether or not the item is tented
(indicating in that case that any clearance will only be applied
to any hole).
The DRC test ignores tented items without a hole, and runs the
clearance test against the hole for items with a hole.
Fixes https://gitlab.com/kicad/code/kicad/issues/11954
Fixes https://gitlab.com/kicad/code/kicad/issues/11951
2022-07-08 17:27:05 -06:00
0c47a09517
Ensure rectangles are normalized
...
Normalize on creation and fixup rectangles previously saved with
inverted coordinates
Fixes https://gitlab.com/kicad/code/kicad/issues/11965
2022-07-07 10:40:18 -07:00
7b28804f67
Fix a minor compil and Coverity warning
2022-07-06 13:54:17 +02:00
f00de04336
FP editor: fix incorrect mirroring of zones in footprint.
...
This is due to a call to Mirror() with incorrect parameter.
Unfortunately, depending on FP items, one Mirror parameter has the opposite
meaning about mirror axis.
Fixes #11952
https://gitlab.com/kicad/code/kicad/issues/11952
2022-07-04 11:14:47 +02:00
cde30d3dba
Clarify cross-probing options
...
Previous the cross-probing options were mixed between sending and
receiving cross-probe events. This clarifies so that all of the pcbnew
cross-probe options deal with whether the cross-probe is seen in pcbnew
and all of the eeschema options deal with seeing the event in eeschema.
Also updates the wording in the options panels to be the same where
possible and adds tooltips
Fixes https://gitlab.com/kicad/code/kicad/issues/11454
2022-07-01 16:47:09 -07:00
af6ba1a16e
Fix typos in pcbnew sub-directory
...
Found via `codespell -q 3 -S *.po,./thirdparty,./Documentation/changelogs -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,ba,busses,dout,einstance,leaded,modul,ontext,ot,overide,serie,te,,tesselate,tesselator,tht`
2022-06-30 09:39:45 -04:00
64b89639cf
PCB Editor: Make Ctrl-Click net highlighting configurable
...
Defaults to ctrl-click is exclusive or selection like other
applications. Footprint editor can only be exclusive or.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10810
2022-06-28 16:29:14 +00:00
ab9c42d427
Fix a typo which leads to a bogus type-cast.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11886
2022-06-27 23:07:06 -06:00
23e8bafd9c
Don't run courtyard conflicts in footprint editor.
2022-06-20 22:25:39 +01:00
298edb09c3
Initialize TEXT_ATTRIBUTES justifications for text & textboxes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11805
2022-06-20 17:03:37 +01:00
73836b50fc
Add proper collision test to via placer.
...
Also moves DISALLOW constraint processing outside the loop as it
performs it's own loop over any objects referenced by the rules.
Fixes https://gitlab.com/kicad/code/kicad/issues/11832
2022-06-19 21:57:49 +01:00
5da817649b
Fix nullptr bug.
2022-06-18 13:04:06 +01:00
97b0005780
More caching for DRC.
...
Also fixes a bug where some physical clearance tests would be run even
if the clearance was 0 (or if the rule was set to IGNORE).
2022-06-17 23:58:31 +01:00
d40664d171
Handle double-click in dimension drawing tool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11815
2022-06-15 18:07:50 +01:00
87f10ea206
Split off the netlist export content helper but it's advancedcfg
2022-06-11 23:09:47 -04:00
9b70308f5c
Nullptr defensive code.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11690
2022-06-11 22:32:12 +01:00
Jeff Young
Ian McInerney
Ian McInerney
John Beard
jean-pierre charras
StuartTylerRelytDesigns
Mike Williams
Jon Evans
Marek Roszko
Wayne Stambaugh
Lucas Dumont
Nimish Telang
Alex
Seth Hillbrand
Chris Morgan
qu1ck
Greg Davill
Graham Keeth
aris-kimi
lulu731
Maciej Suminski
luz paz