Jon Evans
c530bdb5a1
Rename GetSelectMenuText to GetItemDescription
...
This descriptive text is used for many more things than
just the select menu these days.
2023-01-11 22:27:44 -05:00
Seth Hillbrand
14339aa786
Fix shadowing variable
...
Move check into switch block
2023-01-03 17:15:44 -08:00
Jeff Young
375fdb7a49
Exact clearance is allowed; less than clearance is an error.
...
Also fixes a bug where the units weren't shown for extra precision
numbers.
Fixes https://gitlab.com/kicad/code/kicad/issues/13262
2023-01-04 00:03:11 +00:00
Jeff Young
0094a0fc15
Treat teardrops as tracks not zones for disallow constraints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13264
2022-12-26 11:33:09 +00:00
jean-pierre charras
eef47c2a79
DRC: ensure tracks are tested against holes, even if hole clearance is set to 0.
...
Even with clearance = 0, copper to hole must be tested because it cannot be
inside the hole
2022-12-23 14:06:10 +01:00
Jeff Young
e28f6ecc00
Fetch a better location for keepout area collsions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13220
2022-12-21 18:22:15 +00:00
Seth Hillbrand
2fd500e20b
Respect the "report all errors" checkbox
...
When we have objects spanning multiple layers, the user doesn't need to
see every layer/hole combination violation if they do not request it
(cherry picked from commit c07043e762
)
2022-12-12 11:14:38 -08:00
Jeff Young
492e6548ff
If item is on mask layer then we won't call it again on copper layer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13075
2022-12-10 13:51:00 +00:00
Jeff Young
295ef6588d
Fix uninitialized variable.
2022-12-05 14:42:05 +00:00
Seth Hillbrand
92266635cc
Add an advanced config value for the minimum sliver
...
The hard coded value was too small for certain calculations. Better to
have a configurable value that is initially set to our error level to
allow for deviations that don't meet the visibility test for spikes.
These have become more apparent with Clipper2
2022-12-03 16:03:43 -08:00
Seth Hillbrand
b5bd633625
Strict-order points in connection_width
...
The connection width checker uses morton codes to order elements. The
sort should be primarily morton-based but needs to be stable in order to
ensure that nextZ/prevZ elements are properly placed as the actual
next/prev elements in the list. Otherwise, hitting a fracture point
might make us skip in the wrong direction
Fixes https://gitlab.com/kicad/code/kicad/issues/12831
2022-12-03 16:03:43 -08:00
Jeff Young
3501ad1b4d
Record layer for starved thermal exclusions.
2022-12-01 18:04:34 +00:00
Jeff Young
19eab62516
More safety around ratsnest state.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13011
2022-11-30 13:00:21 +00:00
Jeff Young
8260f0ee13
Add support for unitless values to PCB_EXPR_EVALUATOR.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13016
2022-11-29 14:24:20 +00:00
Seth Hillbrand
d232ade752
Remove cloned items from groups
...
When destroying, the group must be null and there's no group purpose in
the DRC checks
2022-11-28 09:11:20 -08:00
Jeff Young
1e3186b9cb
Allow pad-to-copper-graphic collisions in net-ties.
...
This is done under the same conditions as track-to-copper-graphic --
the pad or track must also collide with a net-tie pad, and the pad or
track to copper-graphic collision must be within the boundary of said
pad.
Fixes https://gitlab.com/kicad/code/kicad/issues/13008
2022-11-26 15:04:33 +00:00
Jeff Young
4aff5c7618
Keep courtyard caches alive during move.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12999
2022-11-25 17:20:11 +00:00
Jeff Young
5de4bfde93
Move drilled NPTH holes to hole-clearance checking. Edge-clearance
...
checking is just for milled holes (slots).
Fixes https://gitlab.com/kicad/code/kicad/issues/12980
2022-11-23 13:31:51 +00:00
Jeff Young
97fd99ec99
Re-resolve netclasses after assigning netclass to pattern.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12965
2022-11-22 14:54:08 +00:00
Alex
5e7c4b734c
Small optimizations in DRC and SHAPE_POLY_SET.
2022-11-17 02:10:22 +05:00
Jeff Young
619c340d92
Handle holes when building outlines for copper sliver checker.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12797
2022-11-01 23:33:44 +00:00
Wayne Stambaugh
6a0db3e7e2
Fix Coverity warnings.
2022-10-26 14:39:44 -04:00
Jeff Young
9380b9a451
Trim pad layers to current board before comparing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12758
2022-10-25 23:53:10 +01:00
Jeff Young
cef7cd8f7c
Move default font to RENDER_SETTINGS.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12723
2022-10-22 21:32:42 +01:00
Jeff Young
d16b23d16e
Name shortening and line-break reduction.
2022-10-21 18:41:39 +01:00
Jeff Young
de5980b92e
Share more of the courtyard collision highlighting code.
2022-10-14 10:42:07 +01:00
Jeff Young
11dc5424cb
Pull interactive courtyard checker out of move tool to share with router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-14 00:48:37 +01:00
Jeff Young
098e96f1c7
Use more precise formatting in DRC messages when less precise values are identical.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12587
2022-10-06 22:18:53 +01:00
Jeff Young
9119b5072a
Respect DRCEpsilon in diff-pair coupling test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12587
2022-10-06 22:18:53 +01:00
Jeff Young
d6c7f46842
Formatting.
2022-10-06 22:18:53 +01:00
Jeff Young
6927e75eae
Handle keepout areas with holes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12581
2022-10-06 15:08:56 +01:00
Seth Hillbrand
b4f3390626
Drill size is absolute
...
Use hole plating size for visibility only, not zone filling, routing or
DRC
2022-10-04 09:52:40 -07:00
Jeff Young
e49de68a59
Implement a more durable zone bounding box caching strategy.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10821
2022-10-01 22:10:43 +01:00
Jeff Young
d67437a2aa
Move ratsnest exclusion processing to a post-pass.
...
Also fixes a few cases where we were unnecessarily rebuilding
connectivity more than once for an operation.
2022-09-29 17:08:49 +01:00
Jeff Young
503385f52e
Don't use FindNamedPad for net-tie logic. It only reutrns the *first*
...
pad of a given number.
Also improves other DRC logic to tighten up the net-tie rules now that
we know which pads are allowed to short with which other pads.
Also removes the "Overlapping pads" DRC violation now that we know
whether or not overlapping pads in a net-tie footprint constitute a
short.
Fixes https://gitlab.com/kicad/code/kicad/issues/12506
2022-09-25 17:38:31 +01:00
Seth Hillbrand
0150655ed3
Fix missing DRC check with via
...
When the via is first and not second in our ordering, the hole-copper
clearance was not checked as the track did not have a hole.
We also calculated the NPTH-via clearance incorrectly in the inspector
2022-09-20 13:43:01 -07:00
Jeff Young
64a6fc0fd4
Push UNITS_PROVIDER down into a low-level mixin.
...
This allows us to also construct cheap UNIT_PROVIDERs for specific
tasks when necessary.
2022-09-19 17:10:59 +01:00
Jeff Young
45d6b4a9fc
Readability improvements.
2022-09-19 11:18:20 +01:00
Marek Roszko
3d5913c825
Remove convert_to_biu.h, merge contents to base_units.h
2022-09-16 21:09:28 -04:00
Marek Roszko
e6ed275c25
Repoint IU_PER_MILS
2022-09-16 21:09:26 -04:00
Marek Roszko
a8613ee80f
Combine Iu2Millimeter & remove PcbMm2iu
2022-09-16 21:09:26 -04:00
Mark Roszko
b00178adb3
Nuke base_units from orbit
2022-09-16 04:38:10 +00:00
Seth Hillbrand
78acb4f07f
Fix unintentional typo
2022-09-14 15:14:35 -07:00
Seth Hillbrand
26a1114e3c
Avoid Yields when the results are ready
...
We always need to check for calculation results before yielding the
system otherwise we will delay outcomes
Fixes https://gitlab.com/kicad/code/kicad/issues/12228
2022-09-14 13:30:04 -07:00
Jeff Young
0df1786456
Improve adherecne to ignored tests.
2022-09-11 19:48:08 +01:00
Jeff Young
3534cfbba8
Allow a single net collision with a free pad.
2022-09-06 13:59:52 +01:00
Jeff Young
c0ba1b35bf
Remove SMD pad side sanity check.
2022-09-05 10:41:37 +01:00
Jeff Young
d5cf7828fa
ADDED footprint checks for SMD pad consistency.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11736
2022-09-04 10:34:32 +01:00
Jeff Young
854acd4c77
Null-ptr safety for diff-pair-coupling test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12329
2022-09-02 00:49:33 +01:00
Jeff Young
9188838e50
RIP EDA_RECT.
2022-08-31 23:57:24 +01:00
Jeff Young
b4492e0bd2
More EDA_RECE yeetage.
2022-08-31 17:19:50 +01:00
Jeff Young
2dc6300501
Move EDA_ITEM bounding boxes to BOX2I.
2022-08-31 10:16:55 +01:00
Seth Hillbrand
b736460e71
Move optional access from value() to *operator
...
`value()` throws. Where we check for existence, we don't need to use
the throwing version and should just use the unprotected variant
2022-08-30 13:59:39 -07:00
Jeff Young
2d68cdff94
Better reporting of hole-to-hole clearances and clearance resolutions.
2022-08-29 17:37:49 +01:00
Jeff Young
e0f6a6e475
Run hole-to-hole checks on Edge_Cuts layer.
...
Also makes the flashing logic inside PAD::GetEffectiveShape() easier
to understand.
Fixes https://gitlab.com/kicad/code/kicad/issues/12296
2022-08-29 17:37:49 +01:00
Jeff Young
667a54ad86
Retire insideArea in favour of intersectsArea and enclosedByArea.
2022-08-28 18:02:41 +01:00
Seth Hillbrand
06786c34d7
Blacklist hashes for 2d integer elements
...
The hash table for integer hashes is extremely limited and places most
elements in the same buckets. This leads to a linear search time for
structures built on this.
This blocks hashes, directing the coder to utilize std::set or std::map
structures instead of hash tables for implementing integer-based
lookups.
2022-08-26 08:43:37 -07:00
Jeff Young
1a672aba56
Fix a couple of DRC bugs where the bbox wasn't inflated for largestClearance.
...
Also removes a case of double-testing a pad with a non-plated hole.
2022-08-26 13:22:57 +01:00
Jeff Young
909358e643
Make sure pair caches are layer-specific where they need to be.
2022-08-26 13:22:57 +01:00
Jeff Young
86944c4f9f
Marginal performance improvements.
2022-08-26 13:22:57 +01:00
Seth Hillbrand
f1261e71d4
Replace boost::optional with std::optional
2022-08-25 15:50:47 -07:00
Jeff Young
792d7babe3
Performance (std::map -> std::unordered_map) and commenting.
2022-08-22 12:43:57 +01:00
Jeff Young
46df421064
ADDED defined pad groups for net-tie footprints
...
Each pad group is allowed to short nets with other pads in its group.
Legacy footprints with the "net tie" keyword hack will get a single
group auto-created with all the footprint's pads in it.
DRC and the router now allow a track to collide with copper graphic items
while entering a net-tie pad as long as the closest point in the collision
is within the pad.
DRC (and the footprint checker) now check for copper items in the
footprint shorting pads which are not in the same pad group.
Fixes https://gitlab.com/kicad/code/kicad/issues/2265
2022-08-19 18:54:20 +01:00
Marek Roszko
3a718385cf
Just match the type to the comparison type on second thought
2022-08-18 22:22:04 -04:00
Marek Roszko
675938375b
Use a larger data type for min_dist
...
Squared norms are massive and can logically exceed 32-bit ints
2022-08-18 22:19:36 -04:00
Seth Hillbrand
b9461f2ba7
Re-enable tests for zones
...
Avoid invalid substantial checks triggered by signed floating point
zeros. Adds a QA check to ensure zone-self checks are maintained
2022-08-18 17:06:29 -07:00
Seth Hillbrand
35ac39844f
Clean up some auto usage
...
Don't make new copies of shared_ptr if we can use references. Keep auto
usage down to hard-to-type-out sequences
2022-08-15 11:29:45 -07:00
Jeff Young
1f347582f8
Introduce new marker type so we can track DRC errors on the drawing sheet.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12221
2022-08-15 18:03:03 +01:00
Jeff Young
86938aa425
Read, write and process the board-wide Allow soldermask bridges in FPs.
2022-08-14 22:56:29 +01:00
Jeff Young
a9536b5de9
CHANGED netclass assignments now done via canvas or via patterns.
2022-08-14 22:56:29 +01:00
Jeff Young
a11f48ef10
Markers provider is no longer responsible for all markers.
...
Unconnected items and schematic partity violations are also now
represented by markers, so the ERC/DRC window itself needs to do
the deep-delete.
Fixes https://gitlab.com/kicad/code/kicad/issues/12182
2022-08-08 22:02:20 +01:00
Jeff Young
015bde8cb0
Test pad:hole violations in footprints as long as not same pad number.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12124
2022-08-07 19:49:39 +01:00
Jeff Young
96f01d33c8
Performance improvements.
...
1) Move a bunch of std::map's to std::unordered_map to get constant-time
look-ups
2) Lengthen progress-reporting intervals to spend more time doing work
and less time talking about it
3) Reverse order of SHAPE_LINE_CHAINs in thermal intersection checks to
make (much) better use of bbox caches
4) Don't re-generate bboxes we already have
5) Fix some autos that weren't by reference (and were therefore copying
large datasets)
6) Rename delta progressDelta so it's easier to search for in future
7) Get rid of a few more autos (because I don't like them)
8) Pass large items to lambdas by reference
Fixes https://gitlab.com/kicad/code/kicad/issues/12130
2022-08-03 11:59:42 +01:00
Jeff Young
9a4136de00
Implement annular ring checking for pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12109
2022-08-01 17:45:34 +01:00
Jeff Young
f3936f24ae
Go back to single-threaded sliver checker.
...
Something was unhappy with the multi-threaded version.
(Note that we still multi-thread the polygon-building, which is the
most expensive part.)
2022-08-01 17:45:34 +01:00
Jeff Young
7556d7152f
Fix errant return and improve progress reporting.
2022-08-01 13:09:51 +01:00
Jeff Young
43df863df2
Fix issue with caches not being initialized when printing msg bar.
2022-08-01 13:09:51 +01:00
Jeff Young
0304ad4494
Move connection width testing to rule system.
...
Also copies connection width progress reporting architecture over to
the sliver checker.
2022-08-01 13:09:51 +01:00
Jeff Young
f2f04b1d20
Better progress reporting for thermal connections.
2022-08-01 13:09:51 +01:00
Jeff Young
b0a9cea6f6
Better progress reporting, and don't report necks that don't have items.
...
Since we aren't searching zones (they aren't in the m_CopperItemRTreeCache)
this will drop all errors that are zone-only (which are better handled by
zone-min-width).
2022-08-01 13:09:51 +01:00
Jeff Young
54213bb7f1
Cleanup and move to DRC_ENGINE's status reporter.
...
1) brace formatting
2) get rid of some autos
3) get rid of a dyn_cast that CLion claims is bad
4) use DRC_ENGINE's status reporter
2022-08-01 13:09:51 +01:00
Jeff Young
bf5e649e44
Fix log errors in new solder masking checking code.
2022-07-23 09:26:04 +01:00
Jeff Young
f41af10007
Clean up hole shapes for safety (smart pointer) and consistency.
2022-07-22 23:06:07 +01:00
Jeff Young
a2c002e1da
Improve solder mask aperture testing.
...
1) For solder mask apertures report both the aperture and both
exposed items.
2) Don't process solder mask apertures in footprints with the
"bridging allowed" flag set.
Fixes https://gitlab.com/kicad/code/kicad/issues/12064
2022-07-22 23:06:07 +01:00
Seth Hillbrand
16e3d40552
ADDED: Display calculated clearance in status bar
...
In addition to showing resolved clearance, we also show the calculated
clearance in the same method as is used for DRC. This will allow users
to better examine their system while working.
Fixes https://gitlab.com/kicad/code/kicad/issues/7934
2022-07-21 15:44:48 -07:00
Jeff Young
2de10080cd
Add edge and margin clearances to message panel.
2022-07-15 16:14:32 +01:00
Seth Hillbrand
a9a5136c1c
Always allow blind/buried/micro vias
...
Removes a nanny setting that prevented the use of
blind/buried/micro-vias without a checkbox. If the designer does not
want microvias in their board, they simply do not place microvias.
2022-07-12 19:47:31 -07:00
Seth Hillbrand
3081023b5e
ADDED: Minimum copper connection width DRC check
...
Checks all copper connections in each net/layer for minimum width
setting.
Fixes https://gitlab.com/kicad/code/kicad/issues/9870
2022-07-11 19:26:56 +00:00
Jeff Young
c7746fa000
Fix copy pasta error.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11986
2022-07-08 17:44:36 -06:00
Jeff Young
521b231873
Don't zero out width of shapes on Margin, only Edge_Cuts.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11967
2022-07-08 17:27:05 -06:00
Jeff Young
8a9bf02b7e
Smarten up silk clearance & tented item handling.
...
The inspection tool will report whether or not the item is tented
(indicating in that case that any clearance will only be applied
to any hole).
The DRC test ignores tented items without a hole, and runs the
clearance test against the hole for items with a hole.
Fixes https://gitlab.com/kicad/code/kicad/issues/11954
Fixes https://gitlab.com/kicad/code/kicad/issues/11951
2022-07-08 17:27:05 -06:00
Jeff Young
f611f9f5d3
Allow zone connection rules to target footprints.
...
If the pad is set to inherit and a rule targets its parent footprint,
then that rule should fire.
2022-07-08 17:27:05 -06:00
Jeff Young
fa2e43f696
Reduce noise in board <-> library footprint tests.
2022-07-08 17:27:04 -06:00
Seth Hillbrand
7f9f37e507
Avoid double-caching FP zones
...
Leads to crashes/invalid data when multi-threading hits both at same
time
2022-07-05 20:07:18 -07:00
luz paz
af6ba1a16e
Fix typos in pcbnew sub-directory
...
Found via `codespell -q 3 -S *.po,./thirdparty,./Documentation/changelogs -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,ba,busses,dout,einstance,leaded,modul,ontext,ot,overide,serie,te,,tesselate,tesselator,tht`
2022-06-30 09:39:45 -04:00
Seth Hillbrand
03c279ffd4
ADDED: Threadpool
...
Thread pools are long-lasting executors that have close to zero overhead
when launching new jobs. This is advantageous over creating new threads
as we can use this for threading smalling jobs and smaller quanta. It
also avoids the heuristics needed to determine the optimal number of
threads to spawn
2022-06-24 22:59:24 +00:00
Seth Hillbrand
a852286eb5
Cleanup compile warnings
2022-06-21 17:04:56 -07:00
Jeff Young
82ebc247b8
More performance enhancements for DRC.
2022-06-18 19:47:11 +01:00
Jeff Young
97b0005780
More caching for DRC.
...
Also fixes a bug where some physical clearance tests would be run even
if the clearance was 0 (or if the rule was set to IGNORE).
2022-06-17 23:58:31 +01:00
Seth Hillbrand
4043dca613
Push wxString allocation to smaller context
...
Prevents creation of new wxString on stack for each clearance check
2022-06-16 08:26:28 -07:00
Seth Hillbrand
5327b10064
Remove shared wxString instance in DRC
...
Threaded DRC access will write to this string, re-allocating the memory
without any synchronization between threads using the string. Comment
adding this listed performance as a reason for using shared strings.
Measured performance does not seem noticeably different in either case,
even with high-error count boards. If there is a case where the
performance is limiting, we can replace these wxStrings with
std::wstring and utilize fmt
Fixes https://gitlab.com/kicad/code/kicad/issues/9888
2022-06-15 16:46:03 -07:00
Jeff Young
5e80e2a421
58f553a9ca
requires that cache be layer-sensitive.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11814
2022-06-15 00:30:11 +01:00
Jeff Young
d14fd5a9da
Fix logic error with silk overlap test.
2022-06-04 19:34:24 +01:00
Jeff Young
8b75a32cfa
We only want "actual" shapes, not anything derived from SHAPE.
...
Also fixes a bug where GetParentFootprint would get confused by
groups.
Fixes https://gitlab.com/kicad/code/kicad/issues/11741
2022-06-04 00:24:27 +01:00
Jeff Young
d2a9cbe6e8
Use effective width for DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11740
2022-06-03 23:27:10 +01:00
Jeff Young
37838dffb9
Make sure physical_clearance rules are run against courtyard layers.
2022-05-10 23:02:53 +01:00
Jeff Young
ecf6773f74
Remove dead code.
2022-05-07 21:10:04 +01:00
Jeff Young
30ecca464d
Rename mechanical_clearance -> physical_clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11554
2022-05-06 15:54:46 +01:00
Jeff Young
dfdedfa605
Fix some issue with NPTH pads with holes same size as pad.
2022-05-06 00:06:00 +01:00
Jeff Young
f590dcf513
Fix a couple of typos.
2022-05-06 00:06:00 +01:00
Jeff Young
5d0d2201f3
Improve clearance report messages.
...
Removes some duplicated terms; puts in some more headers to make
visual parsing easier, and makes non-connected-pads report the correct
data.
Also fixes a bug where zone-connection overrides of none weren't getting
handled correctly.
Fixes https://gitlab.com/kicad/code/kicad/issues/11544
2022-05-03 16:30:04 +01:00
Jeff Young
bf2566a44f
Post-process board min clearance rather than building it in to netclasses.
...
The later makes the diagnostic messages harder to decipher.
2022-05-03 13:39:14 +01:00
Jeff Young
d192d3c31d
Better violation title for disabled layers check.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11451
2022-04-25 09:39:49 +01:00
Jeff Young
f0dab2e07b
Fix some layer handling issues.
2022-04-23 21:29:46 +01:00
Jeff Young
e6684bf7c7
Add footprint checks to board-level DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11437
2022-04-23 11:34:18 +01:00
Jeff Young
4525b1f085
More consistency in DRC error messages.
2022-04-23 09:39:34 +01:00
Jeff Young
9ff1ae5bdc
Better inspection reporting for netclasses, custom rules and DRC.
2022-04-17 00:33:56 +01:00
Jeff Young
7f3a75bccd
Add a bunch more inspections for rule resolution.
2022-04-15 22:10:13 +01:00
Seth Hillbrand
819276bd98
DP tolerance needs to be 1IU on each axis
...
ApproximatelyParallel will only check for parallel within 1 IU, so a 1x1
SEG will always be parallel and the projection is invalid
(cherry picked from commit d0796399a2
)
2022-04-11 16:58:10 -07:00
Jeff Young
82820d4b1c
Cleanup.
2022-04-09 20:39:35 +01:00
Jeff Young
722b2588f4
Better error reporting for DP uncoupled length.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10087
2022-04-08 11:40:53 +01:00
Jeff Young
a118249093
NPTHs obey HOLE_CLEARANCE, not CLEARANCE.
...
Also, plating thickness appears on both walls, so diameter is drill
plus 2X plating thickness.
2022-04-04 20:43:08 +01:00
Jeff Young
f7cdc7af75
Apply a more sophisticated test for ignoring isInCoupledDiffPair.
...
The basic problem is that the DRC engine does length testing and skew
testing by collecting all the diff pair constituent parts and pairing them
itself. Since each part is collected on its own, we need to ignore the
'B' unit when evaluating any conditional expressions. However, doing this
in general means that when evaluating "OwnClearance()" we also ignore the
'B' unit and return the diff pair CLEARANCE_CONSTRAINT when we shouldn't.
This implements a more discerning test which know what the current requested
constraint is when evaluating expressions.
See also https://forum.kicad.info/t/solved-custom-differencing-rule-not-working-drc/34034/6
Fixes https://gitlab.com/kicad/code/kicad/issues/11314
2022-04-02 15:12:42 +01:00
Wayne Stambaugh
150859c973
Try Coverity fixes that don't break unit tests.
2022-03-25 16:49:29 -04:00
Wayne Stambaugh
7da7864f5e
Fix some Coverity issues.
2022-03-25 15:51:05 -04:00
Jeff Young
b679a21651
Zero out parent rule when overridden by local property.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11197
2022-03-21 20:49:35 +00:00
Jeff Young
cf611f1742
Better safety around layersets.
2022-03-21 18:19:00 +00:00
Jeff Young
5aa561abe1
Add overlapping pad test and share some tests between board & fp editor DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10086
2022-03-18 19:58:42 +00:00
Jeff Young
0f359c8a3b
Careful of calculated fields when comparing board FPs with library.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10143
2022-03-17 13:19:25 +00:00
Jeff Young
62f813fddc
Better error reporting for PTH pads.
2022-03-16 14:56:32 +00:00
Jeff Young
f596ae3487
Allow mechanical-clearance checks between edge_cuts and other layers.
2022-03-16 14:56:32 +00:00
Jeff Young
600dcd31ad
Allow track board edge clearance violations inside the holes of castellated pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-15 00:05:23 +00:00
Jeff Young
8d682002c3
Fix previous breakage from shared_ptr going out of scope.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-14 23:57:50 +00:00
Jeff Young
e7bf4ab8fa
Separate board-edge silk clearance from mask-edge silk clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-14 20:19:09 +00:00
Jeff Young
2ec21c7720
Don't check for board edge collision on castellated pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-14 20:19:09 +00:00
Jeff Young
65185f53a1
Rotate fp zones before comparing with library versions.
...
Also includes some performance fixes to not copy around triangulation
data when it's not needed.
Fixes https://gitlab.com/kicad/code/kicad/issues/10143
2022-03-14 15:53:24 +00:00
Jeff Young
ced1e68ea1
A bit of wxT().
2022-03-13 16:09:06 +00:00
Jeff Young
db0b733be5
Clear DRC caches before running soldermask tests again.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10922
2022-03-12 19:44:34 +00:00
Jeff Young
89e61ff73b
More performance enhancements for DRC.
2022-03-12 14:17:52 +00:00
Jeff Young
6f555b6258
wxT() and some cleanup in DRC.
2022-03-11 23:19:16 +00:00
Wayne Stambaugh
eec528ae48
Fix GCC build error on Linux.
2022-03-11 17:03:01 -05:00
Jeff Young
ae307e1b34
Parallelize DRC triangulation, keepout processing, and sliver checking.
...
Also fixes issue with adding fractured polygons in sliver checking which
slowed the board from hell down to less than a crawl.
2022-03-11 20:52:11 +00:00
Jeff Young
663edcf665
Better progress indication for board from hell.
2022-03-09 14:30:21 +00:00
Jeff Young
e4b56ab7f1
Performance fixes for the board from hell....
2022-03-08 23:54:34 +00:00
Jeff Young
1fc99dd2c0
Don't call GetLayer() on a multi-layer object.
2022-03-05 23:07:43 +00:00
Jeff Young
843a56c4e4
Implement two-staged zone priority: assigned priority followed by UUID.
2022-03-01 14:53:35 +00:00
Jeff Young
914e706023
Replace zone-with-no-pads test with isolated copper test.
...
The later is far more discriminating.
Fixes https://gitlab.com/kicad/code/kicad/issues/11009
2022-03-01 12:02:17 +00:00
Jeff Young
79c7859052
Apply a19d9105f0
to zone case as well.
...
Also improves on the previous comments.
Fixes https://gitlab.com/kicad/code/kicad/issues/10922
2022-02-21 13:48:34 +00:00
Jeff Young
86988225c3
Exclude some fab attrs from library parity check.
...
Also excludes zone outline hatching, which is just a visualization
property.
Fixes https://gitlab.com/kicad/code/kicad/issues/10903
2022-02-19 14:59:50 +00:00
Seth Hillbrand
a19d9105f0
Fix SolderBridge check to only check across multiple
...
We should not generate an error when overlapping a single copper element
with a soldermask that is not associated with copper.
Fixes https://gitlab.com/kicad/code/kicad/issues/10906
2022-02-18 11:47:28 -08:00
Jeff Young
6f6cf995ba
Don't ask for layer of multi-layer item.
2022-02-18 14:53:10 +00:00
Jeff Young
1ee3ce45e8
Don't ask for layer of multi-layer objects.
2022-02-18 14:19:13 +00:00
Jeff Young
ce0233577b
Don't try to fetch layer of multi-layer objects.
2022-02-18 13:20:36 +00:00
Jeff Young
e09ecd8380
Don't ask for layer of multi-layer objects.
2022-02-18 13:20:36 +00:00
Jeff Young
2172810600
Performance: better sharing of zone fills.
2022-02-15 19:19:03 +00:00
Jeff Young
3deaf902bb
Retire the V5 zone fill algorithm.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10578
2022-02-11 13:10:52 +00:00
Jeff Young
50a4d610a6
Be cognizant of flashed layers when generating pad shapes.
2022-02-11 13:10:52 +00:00
Jeff Young
ca56de7816
Show DRC overflows in both tab titles and number badges.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10617
2022-02-09 17:04:32 +00:00
Wayne Stambaugh
06e00c7957
Fix shadow variable compile warning in text DRC provider.
2022-02-08 09:26:12 -05:00
Jeff Young
3b5474f190
Don't punt on TrueType char thickness; analyze it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10740
2022-02-08 14:10:37 +00:00
Jeff Young
137edbe3f3
Add disclaimer for TrueType fonts to thickness test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10740
2022-02-08 14:10:37 +00:00
Jeff Young
3c5ae6d317
Don't let zone cutout on different layer confuse us about intersections.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10583
2022-02-08 14:10:37 +00:00
Jeff Young
091055fa1d
Don't count track as a pre-existing connection.
2022-02-08 14:10:37 +00:00
Jeff Young
5ce559176d
Overhaul the font metrics calcs for overbar, italics and bboxes.
2022-02-07 17:36:40 +00:00
Jeff Young
e59aaf05c6
Make sure that GetConnectedItems searches from the root item.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10583
2022-02-06 19:43:25 +00:00
Jeff Young
b2e3f03222
More wide-string declarations.
2022-02-05 22:03:04 +00:00
Marek Roszko
193dee11e8
Add missing null check PVS V595
2022-02-05 11:25:09 -05:00
Jeff Young
c8d14ade65
Only run starved-thermals checks when pad is actually connected to zone.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10583
2022-02-02 13:09:27 +00:00
Jeff Young
63a3b1e20a
Estimate outline font thickness for DRC readability checks.
2022-02-01 12:01:04 +00:00
Jeff Young
1f8c29c395
Coverity fixup.
2022-02-01 12:01:04 +00:00
Jeff Young
5739505aa3
TextBoxes for PCBNew.
2022-01-31 20:00:47 +00:00
Seth Hillbrand
c01e2dcfec
Fix large memory leak in DRC
...
All elements get effective shapes, many of which get triangulated. This
memory needs to be freed when destroying the tree
(cherry picked from commit c2707f3cc0
)
2022-01-28 17:08:33 -08:00
Jeff Young
29841ba315
Bring ERC & DRC dialogs into parity.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9350
2022-01-22 22:27:41 +00:00
Jeff Young
14006495d5
Angle cleanup.
2022-01-20 22:35:41 +00:00
Jeff Young
038db715a3
Move zone hatch orientation to EDA_ANGLE.
2022-01-19 00:34:03 +00:00
Jeff Young
f60c05fc67
Use epsilon compartor for doubles.
2022-01-18 18:40:55 +00:00
Jeff Young
8c246a761d
Move EDA_ANGLE from int to double.
2022-01-17 20:57:54 +00:00
Jeff Young
0967cc82e2
Exclude rules which match no enabled layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10227
2022-01-15 01:30:03 +00:00
jean-pierre charras
bc77a1e2dd
drc_test_provider_library_parity: fix a crash due to a incorrect if()...else() logic.
...
The incorrect logic allowed execution of the else sequence when it should not be executed.
2022-01-14 18:17:27 +01:00
Jeff Young
07013d00e1
More EDA_ANGLE.
2022-01-14 16:08:19 +00:00
Jeff Young
abd3f5bc2b
Move footprints to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
Jeff Young
d485eb2514
Move pads to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
jean-pierre charras
cf11abda3d
Fix test_drc_regressions.cpp: disable tests that need a footprint library
...
DRCE_LIB_FOOTPRINT_ISSUES and DRCE_LIB_FOOTPRINT_MISMATCH imply a library
but the test cases do not have a library.
2022-01-12 15:57:41 +01:00
jean-pierre charras
ea3efac2b6
drc/drc_test_provider_library_parity.cpp: protect against null pointer use.
...
qa tests, test_solder_mask_bridging.cpp: filter not relevant DRC tests
2022-01-12 14:41:11 +01:00
Jeff Young
8c6c87eaf4
Separate footprint lib issues from footprint mismatch issues.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10132
2022-01-11 22:28:24 +00:00
Marek Roszko
fcfe42d67c
Continue the war on wxPoint
2022-01-10 19:52:26 -05:00
Jeff Young
21790fcab7
Fix a pair of dereference-freed-pointers in DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10335
2022-01-10 21:06:03 +00:00
jean-pierre charras
c24985e8cf
drc_test_provider_sliver_checker.cpp: skip very small vertices when testing.
...
Very small vertices (length <= 2 or 3 iu) are frequent in filled areas, and
create false positive detections because one cannot calculate a meaningful
orientation of these vertices.
2022-01-10 11:50:29 +01:00
jean-pierre charras
2b20a58615
Zone fill: fix an issue that uses thermal spoke width as thermal gap.
...
Fixes #10300
https://gitlab.com/kicad/code/kicad/issues/10300
2022-01-08 14:24:14 +01:00
jean-pierre charras
33dbe92deb
drc_test_provider_mechanical_clearance: add missing handling of SHAPE_T::RECT
...
test_ee_item.cpp: add missing call to ClearFieldsAutoplaced();
2022-01-08 10:49:47 +01:00
Jeff Young
b70cf1473f
Allow solder mask aperture objects to inherit nets during DRC.
...
The issue is that object A (the solder mask aperture object) can
bridge objects B and C which have different nets. Since we only do
object-to-object compares we don't find this. By allowing object A
to inherit the first net it collides with (either object B's or
object C's), we'll generate a violation with the second collision.
Fixes https://gitlab.com/kicad/code/kicad/issues/10189
2022-01-03 20:58:01 +00:00
Jeff Young
0365c6bf4b
Coverity fixes.
2022-01-02 14:57:03 +00:00
Marek Roszko
7d671cff1e
Scoop up some more wxPoints
2022-01-01 21:06:40 -05:00
Tomasz Wlostowski
dafa8ec671
pcbnew: fix incorrect type cast in DRC_TEST_PROVIDER_TEXT_DIMS
...
FP_TEXT cannot be casted to PCB_TEXT for obvious reasons, but what I don't understand is why downcasting to EDA_TEXT also crashes due to incorrect vtable method pointer (Clang10/Linux here).
I leave this as a curiosity for whoever knows C++.
2022-01-01 22:42:16 +01:00
Marek Roszko
c4c56de708
Neurotically update position wxPoint usages
2022-01-01 11:55:51 -05:00
Marek Roszko
347e03363a
Convert wxPoint/wxSize starting from EDA_RECT usages
2022-01-01 11:30:33 -05:00
Ian McInerney
0e9cfd0af2
Add missing initialization values to variables
...
Flagged by Coverity.
2021-12-30 23:42:06 +00:00
Erwan Rouault
dc98419d85
pcbnew: Add via height support in drc length
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10135
(cherry picked from commit 11c967b259
)
2021-12-30 09:35:10 -05:00
Jeff Young
ab583a32f9
Better layer handling for DRC markers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10126
2021-12-26 15:06:12 +00:00
Jeff Young
03a5bd5319
Handle flipped footprints in library compare algorithm.
...
Also fixes a bug where line styles weren't taken into account.
Fixes https://gitlab.com/kicad/code/kicad/issues/10107
2021-12-25 13:41:59 +00:00