686a62cbe6
Temporary fix to disable zone-zone clearance display
...
When selecting two objects, we display the measured clearance between
them. This can be problematic with large zones as they have thousands
of triangles.
This is a temporary fix for 8.0.1 to disable the check until we have a
performant version
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17327
2024-03-08 10:31:59 -08:00
aa68a3817a
Fix zone cross-probing from DRC dialog.
2024-03-08 21:23:14 +03:00
f6f0b9a661
ADDED: PCB 3D image raytracing rendering from CLI.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/3691
2024-03-08 14:38:18 +00:00
06a8517818
Further improvements to cache locking.
...
In particular, don't hold cache lock while doing computations.
2024-03-07 13:20:20 +00:00
4dcec60bf4
add include <mutex> to fix compilation under linux
2024-03-07 13:20:16 +00:00
bb9448edcb
change m_CachesMutex to shared_mutex and do shared locking for read access in zone BBox calculations
2024-03-07 13:20:13 +00:00
991ff71f33
fix deadlock in DRC "Checking keeopouts & disallow constraints"
2024-03-07 13:20:10 +00:00
4590455ab2
protect cache lookups in pcbnew/zone by locking the mutex before calling find, fix #17237
2024-03-07 13:20:06 +00:00
7520a8b316
Avoid updating max clearance while in dtor
...
Max clearance is updated by IncrementTimeStamp(), which is called when in the FOOTPRINT dtor and ZONE dtor. This can cause issues when iterating over all footprints as the footprints may be delete-ed
Fixes https://gitlab.com/kicad/code/kicad/issues/17269
2024-03-06 18:48:49 +00:00
8b3fc41ee5
Update QR footprint wizard
...
- Allows more than 62 bytes
- Adjusts size of code based on data or parameters
- Allows selection of ECC
2024-03-06 18:39:40 +00:00
20efeef5ae
Apply anti-walk algorithm only to textboxes.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16481
2024-03-06 13:51:27 +00:00
4e8e14ae3a
Responsive: Avoid excessive repaints when toggling a netclass' rastnest visibility.
...
Toggling netclasses visibility toggles the member nets' visibility one by one. Defer redrawing until all toggling is done.
Fixes https://gitlab.com/kicad/code/kicad/issues/17115
2024-03-05 14:32:12 +00:00
a4da829ccc
Fabmaster (CADENCE ASCII): import dimensions graphics.
...
See https://gitlab.com/kicad/code/kicad/-/issues/17239
2024-03-04 19:51:28 +03:00
cb4ace5561
Fabmaster (CADENCE ASCII) import: fix position and orientation of footprint graphics.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17239
2024-03-04 19:51:27 +03:00
36331e259a
VRML: add options to exclude DNP/unspecified types like STEP exporter
2024-03-04 10:10:34 -05:00
30573beb48
EasyEDA Std: fix importing footprints from footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17264
2024-03-04 16:34:51 +03:00
951c550c1e
EasyEDA Std PCB: fix crash when Name/Prefix type text is not in a footprint.
2024-03-04 15:09:31 +03:00
4a945172db
Pcbnew: do not select a PCB_REFERENCE_IMAGE if the LAYER_DRAW_BITMAPS is not visible.
...
LAYER_DRAW_BITMAPS layer controls transparency and visibility of images on the board.
Fixes #16282
https://gitlab.com/kicad/code/kicad/-/issues/16282
2024-03-04 11:46:45 +01:00
02cdb0c6b9
Mask aperture pads can have multiple layers
...
But as long as they don't have copper, we should treat them as mask
apertures
2024-03-03 20:56:39 +00:00
85b1978408
Use 64-bit type to represent microseconds.
...
int and long are 32-bit on Windows, causing overflows.
2024-03-03 21:40:26 +03:00
3eb5c52073
Improve zone manager dialog layout.
2024-03-03 12:09:01 -05:00
66b378087a
Remove close button from pcbnew search panel
...
For consistency with the other panels, removes the circular 'x' close
button from the search panel. Toggling visibility remains possible
through the View menu
2024-03-03 16:18:23 +00:00
0c8e08ed58
Move some language changes to a event on the frame
2024-03-03 11:02:26 -05:00
0bde79bd6c
PCB_PAINTER: do not draw PCB_SHAPEs on netname layer in FP editor.
...
Fixes #17250
https://gitlab.com/kicad/code/kicad/-/issues/17250
2024-03-03 17:00:17 +01:00
fe1c73ed7c
Performance: Cache BOARD::GetMaxClearanceValue
2024-03-03 13:54:46 +00:00
f6cf78fd7c
plot_board_layers.cpp: when plotting pads, Save/restore corner radius ratio
...
instead of corner radius.
The corner radius comes from corner radius ratio, so saving/restoring the corner
radius can create rounding errors when trying to recalculate the ratio from the radius.
2024-03-03 11:56:41 +01:00
ed18a9bcc2
Correctly handle footprint graphic knockouts for no-net case
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17223
2024-03-02 15:39:07 -05:00
3a3ceb8ffc
Allow specifying a minimum for a via_count constraint
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17234
2024-03-02 15:26:28 -05:00
a4929f9c27
Step exporter: handle circles correctly
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17137
2024-03-02 19:09:33 +01:00
d458bcad16
kicad_cli fp ugrade: create directory with extension
2024-03-02 18:21:13 +01:00
d81605f4ea
DIALOG_PAD_PROPERTIES: fix a incorrect test to show a warning.
2024-03-02 17:16:27 +01:00
4508512343
Sanitise filename before saving footprint library
2024-03-02 13:06:23 +01:00
a4a99e3aff
kicad_cli: Allow upgrade of legacy and non-kicad footprint libraries
2024-03-02 13:06:23 +01:00
bd1d449cd3
Check for NETINFO_ITEM before dereferencing it.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17230
2024-03-02 11:37:22 +00:00
1ee49cca5e
FOOTPRINT_CHOOSER_FRAME: rework on bottom panel to allow a long string in
...
the check box for filter by FP names to be displayed without overlapping other
widgets.
2024-03-02 11:24:54 +01:00
1297ddc88d
pcbnew: Added default master pad properties
...
CHANGED: Automatically selects the right pad type for the footprint type. Resets the pad properties if the master pad properties do not match the pad type.
https://gitlab.com/kicad/code/kicad/-/issues/16563
2024-03-02 00:13:39 +00:00
0129191ec0
Limit where the intersection of two lines can be
...
This avoids generating lines where we are unable to select them because
they get too close to the border
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16959
2024-03-01 15:57:24 -08:00
8dddd9cc2c
Separate "use board stackup colors" into separate checkbox.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17085
2024-03-01 23:45:06 +00:00
14667e2033
Don't wait for unused events
...
We only need the UI update and mouse/keyboard while updating our DRC
window. Waiting for other events gets into a race condition with the
schematic editor that can cause a hang
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17003
2024-03-01 15:21:42 -08:00
d3334ed9f0
Do not re-number aperture pads
...
Aperture pads do not have numbers, so reserving space for them will
cause the actual numbered pads to become out of order
2024-03-01 13:04:19 -08:00
005affd473
FOOTPRINT_CHOOSER_FRAME: Fix a UI problem specific to Linux
...
On the bottom on the frame, some widgets were not correctly placed.
Fixes #17217
https://gitlab.com/kicad/code/kicad/-/issues/17217
2024-03-01 19:56:22 +01:00
8d19d27483
Fix zone manager crash when no board is loaded
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17187
2024-03-01 15:58:01 +00:00
defcb49ac8
Support Altium Schematic ASCII import
2024-02-29 20:49:20 +00:00
24529e5242
ADDED: library tree context menu option to open sym/fp library files from the defined text editor.
...
Short description:
Works for Symbol and Footprint Editor behind an advanced config option.
For Symbol Editor it is shown for a single item selection (library or symbol).
For Footprint Editor it is shown for a footprint selection.
(fp editor allows a single tree item selection only).
Option stays hidden if current frame has been modified.
Also small fix(?) for similar action to the project manager.
(Call for the Execution has moved inside the file loop.)
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/15736
2024-02-29 19:01:59 +00:00
c23550dc0b
Unflip when going to viewport which isn't flipped.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13773
2024-02-29 17:37:48 +00:00
39a0a81832
EasyEDA Std import: support multiline text on PCB.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17171
(cherry picked from commit 0dab086f0c
2024-02-29 00:54:46 +00:00
b8748c4ef8
Add import netclass color menu items to PCB appearance widget
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16908
ADDED: Context menu item in PCB appearances widget to import netclass
color from schematic.
ADDED: Context menu item to reset PCB netclass color (replicating
same menu item from Nets inspector)
2024-02-28 23:13:15 +00:00
141de7ac11
Even up spacing in dialog.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16391
2024-02-28 22:18:27 +00:00
6a8d2a7eb3
Store group id rather than group
...
We only need the group storage id for lookup. Storing the KIID instead
of a copy of the group avoids unneeded overhead
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17175
(cherry picked from commit 7d1adff071
2024-02-28 13:27:38 -08:00
27031dd2c5
Check env vars when testing for unresolved variables.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17174
2024-02-28 17:16:58 +00:00
9e7b4b7f89
Avoid nullptr dereference when loading group info
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17154
2024-02-27 19:43:21 -05:00
0df5cf7f75
Expose grid origin action in more places
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17007
2024-02-27 18:50:44 -05:00
a8880fb63e
Fix memory leak in net inspector dialog
2024-02-27 19:49:13 +00:00
b2a25cb59e
Correct usage signature for PNS_NODE::Add()
...
When moving a unique_ptr, you are actually passing the object, not a
reference to the object. So we either std::move with the bare
unique_ptr parameter or we pass a reference. But we should never pass
an rvalue reference for this or we'll make a copy without holding the
tracking (because it was moved)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16839
2024-02-27 19:49:13 +00:00
e6a2f3b87a
Eagle text anchor points and alignment aren't linked.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17135
2024-02-27 15:00:30 +00:00
6e478f52f4
Fix wrong rotation centre.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17135
2024-02-27 15:00:27 +00:00
ed4a4ec8ec
Add option to Footprint Chooser to switch between the selected fp or its 3D view
...
Fixes #16173
https://gitlab.com/kicad/code/kicad/-/issues/16173
2024-02-27 10:17:00 +01:00
43c45f3ee8
Fix copy pasta.
2024-02-26 12:39:01 +00:00
2f6c9d1f3a
ADDED: Selection filter for schematic editor
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14988
2024-02-25 17:44:10 -05:00
11774cc9fe
Fix some dialog layout issues.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16391
2024-02-25 22:10:51 +00:00
9066e4b9d0
Reconcile solder_paste_ratio and solder_paste_margin_ratio.
2024-02-25 21:25:44 +00:00
aef87b9796
Push thickness handling down into EDA_TEXT::SetBold().
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17077
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14875
2024-02-25 17:28:52 +00:00
be83f276c4
Add a couple more tooltips.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16391
2024-02-25 15:30:47 +00:00
dba2fdb6d3
Don't import invalid polygons.
...
If we *do* get a 2-point polygon in SVG, import it as a segment.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17091
2024-02-25 12:28:19 +00:00
4056428a08
Sigh. We use different tokens for FP and pad solder paste margin ratios.
...
Seriously? Afraid so: solder_paste_margin_ratio and solder_paste_ratio.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17108
2024-02-25 11:31:04 +00:00
986dbfd235
Don't double-add pads to commit.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17087
2024-02-25 11:31:04 +00:00
6bbac26fd3
Fix merge conflict.
2024-02-24 20:05:51 +00:00
e27f859c11
Apply Pad Properties teardrop terminology to Via Properties.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17050
2024-02-24 20:05:51 +00:00
f77de66f4e
Generalize ERCItem inspections.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10539
2024-02-24 20:05:51 +00:00
fa0ead98d8
Split out table editing and table cell editing.
2024-02-24 20:05:51 +00:00
3282e4bb66
Formatting.
2024-02-24 20:05:51 +00:00
c3496e4af6
Implement min skew checking.
2024-02-24 20:05:51 +00:00
782af3a918
Clear text before replacing in ImportSettingsFrom.
2024-02-24 20:05:51 +00:00
e760317af6
ADDED: Implement footprint link checking in ERC.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16842
2024-02-24 20:05:51 +00:00
6dc60598da
Cleanup array dialog.
2024-02-24 20:05:51 +00:00
d7e4a8cebd
ADDED: ERC/DRC exclusion comments.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16020
2024-02-24 20:05:51 +00:00
833ec402a0
Generalize DRCItem inspections.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10539
2024-02-24 20:05:51 +00:00
4eefbc7815
ADDED: textbox and tablecell margins.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10672
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6806
2024-02-24 20:05:51 +00:00
e445249720
ADDED: PCB tables.
2024-02-24 20:05:51 +00:00
48f983826d
Tooltip for "Prefer zone connections".
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16587
2024-02-24 20:05:51 +00:00
67cd446e6d
Add textbox text to description.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16573
2024-02-24 20:05:51 +00:00
ee3be0802c
Move PCBNew overrides to nullable properties.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5562
2024-02-24 20:05:51 +00:00
4c5dbcd7f4
ADDED override locks checkbox for update from schematic.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16471
2024-02-24 20:05:50 +00:00
4a9df1e18e
ADDED: actions for left-, center-, and right-justifying text items.
...
(For both PCBNew and EESchema.)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12375
2024-02-24 20:05:50 +00:00
ed6f900b70
adding No Layers to apprearance manger presets, fix #15625
2024-02-24 15:44:26 +00:00
6347cb043e
Add bottom panel to have correct background in fp/sym chooser frames.
...
See https://gitlab.com/kicad/code/kicad/-/issues/15810
(cherry picked from commit 97ff48b426
2024-02-24 18:20:16 +03:00
5578b2c954
Hide unused message panel in footprint/symbol chooser frames.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15810
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15889
(cherry picked from commit badc4e7411
2024-02-24 18:20:16 +03:00
d72491a4a5
ADDED: zone manager
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9636
2024-02-24 15:10:50 +00:00
5900f6baa4
Do not call MakeShapes in AddCopperPolygonShapes when polyset is empty.
...
Ease of debugging.
(cherry picked from commit 0184dfb625
2024-02-23 22:15:17 +03:00
d04d74c511
Highlight nets and show length tuning status when adding tuning patterns.
...
Also fixes length preview when hovering over joints.
Also prevents asserts when hovering over arcs.
Also prevents adding a tuning pattern on other tuning pattern.
(cherry picked from commit 711c6141a8
2024-02-23 20:29:18 +03:00
c3bcbb6238
Update Edit Teardrops dialog to match other teardrop terminology.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17050
(cherry picked from commit c8b06d54cb
2024-02-23 16:53:36 +01:00
dfd97003ac
Rule areas should be allowed on user layers.
...
Non-board tech layers too. We don't know how people will
write their custom DRC rules.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17034
(cherry picked from commit 01d668c09d
2024-02-23 16:53:34 +01:00
7b17646b71
Make sure nets get reassigned when name is changed.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17025
(cherry picked from commit f4a3613561
2024-02-23 16:53:34 +01:00
5c026db27a
Report fp library loading errors with libName & fpName.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16975
(cherry picked from commit 12922d9434
2024-02-23 16:53:34 +01:00
ca3cd706e5
Show friendly name in toolbar button tooltips.
...
(Don't require the same text to be put into the tooltip.
It's error-prone and also disallows us from having a separate
tooltip for toolbar buttons.)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17009
(cherry picked from commit f4a085575a
2024-02-23 16:53:33 +01:00
a156b49e2c
Comments.
...
(cherry picked from commit 8a3cbce8f8
2024-02-23 16:53:33 +01:00
3938c35f17
Repair copy/paste of footprint fields.
...
Some of the code got lost in the move to PCB_FIELDs.
(cherry picked from commit a9c4a17c38
2024-02-23 16:53:33 +01:00
e7f18e7eab
Warp after context menu only if actively drawing.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11080
(cherry picked from commit 1a7152d3eb
2024-02-23 16:53:32 +01:00
e68cd04d48
Don't modify reference point if already moving.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16524
(cherry picked from commit 08da9a4494
2024-02-23 16:53:32 +01:00
898f60ea2f
Add help text for DRC assertion clauses.
...
(cherry picked from commit d36f189192
2024-02-23 16:53:31 +01:00
345645bd8c
Help documentation for "assertion" constraints.
...
(cherry picked from commit 152c458b9c
2024-02-23 16:53:31 +01:00
900962f9f1
Update syntax help for memberOfFootprint.
...
(cherry picked from commit 7ae14f9630
2024-02-23 16:53:31 +01:00
57dcf285c5
Various string issues held over from 8.0 string freeze.
...
(cherry picked from commit a610542a19
2024-02-23 16:53:31 +01:00
23c2104ffa
Improve alignment tooltips.
...
(cherry picked from commit 2ab492474e
2024-02-23 16:53:31 +01:00
9ff66d0e71
Don't capture references to local variables for CallAfter.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16934
(cherry picked from commit 9d40374baf
2024-02-23 16:53:30 +01:00
276171b85e
Handle holes in shapes when creating bounding hulls.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16347
(cherry picked from commit 0ead8a14a1
2024-02-23 16:53:30 +01:00
ef6a5b6252
teardrops: calculate better points on track for track arc.
...
Previously, a reference point to calculate teardrop length was calculated
using a track segment. It can create significant position error with track arcs.
Now a arc is used to find this reference point.
2024-02-23 11:36:14 +01:00
6ceea747b2
Swap to capitalized strings (translated).
2024-02-22 11:54:52 +03:00
dd6213051d
Pick DP coupled segment closest to start item and baseline.
2024-02-20 22:06:00 +03:00
01327b24b4
PANEL_SETUP_LAYERS: when removing a layer, do not delete items owned by footprints.
...
Items owned by footprints are allowed to be on non existing layers on board.
Moreover, items owned by footprint cannot be deleted by the board editor.
Fixes #17038
https://gitlab.com/kicad/code/kicad/-/issues/17038
2024-02-20 18:38:48 +01:00
012b32e989
Don't leave dangling net pointers on PCB_SHAPEs.
...
Also makes it harder for this type of error to occur in
future.
2024-02-20 17:36:54 +00:00
2e97d5d7cc
Add missing check in tuning pattern outline.
2024-02-20 20:32:07 +03:00
cbfd757d28
Reduce amplitude snap value of tuning patterns.
2024-02-20 03:20:08 +00:00
10e6ca8740
Show tuning pattern baselines when not editing them.
2024-02-20 03:20:08 +00:00
59a0635b09
Disable local ratsnest when moving generators (tuning patterns).
...
They're not moving like normal objects, leaving ghost ratsnest.
2024-02-20 03:20:08 +00:00
ed712faf41
Disallow duplicating tuning patterns alone.
2024-02-20 03:20:08 +00:00
5e5effaf3a
Ensure minimum outline size in tuning patterns.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16847
2024-02-20 03:20:08 +00:00
82312a0fae
router: SplitAdjacentSegments() should check if the end segment we are about to split is in the same net that the head segment
...
Otherwise, the router might add bogus segments to the node. The root of the problem is somewhere in the logic that delivers aEndItem to ROUTER::Move() though - as the end item (in line placement mode at least) should always be an item within the same net as the head and not belonging to the current head...
2024-02-20 03:20:08 +00:00
8d76e4e171
Allow DP meanders to (mostly) fit on adjacent segments.
2024-02-20 03:20:08 +00:00
943c5fea59
Fix length calculations in DP meander placer.
2024-02-20 03:20:08 +00:00
29188bdc53
Fix some edge-cases in DP tuning pattern outline.
2024-02-20 03:20:08 +00:00
4227b1add9
Improve tuning pattern robustness.
2024-02-20 03:20:08 +00:00
1a65c0091f
Tweak default meander settings.
2024-02-20 03:20:08 +00:00
35e73d7dee
Restore green router collision color.
2024-02-20 03:20:08 +00:00
e9a881ed01
Reset placer when routing start fails to prevent crash on next usage.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17008
2024-02-20 03:20:08 +00:00
89592d08bf
Revise teardrop graphics sizes
...
Sizes were too large on many systems. Revised panel uses 615px on Linux
instead of 742. Adjusted line sizes to remain minimum visible width at
new height.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17018
2024-02-19 12:48:36 -08:00
60fe87a73c
PCB: always parse ki_fp_filters as a property, not a field
2024-02-19 09:41:27 -05:00
d3befd8bb8
Remove dummy items from group before they are deleted
...
Board items should not be in a group when they are deleted, but these
are dummy ones, so their group membership doesn't matter.
Fixes KICAD-7P0
Fixes KICAD-6VX
Fixes KICAD-7KK
Fixes KICAD-6VH
2024-02-16 12:20:00 +00:00
b2c6e2de1f
Fix file not found msg contents for step resolving
2024-02-15 23:10:57 -05:00
762c159b96
Fix KIPRJMOD by setting the project as active by modifying the board loading helper
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16973
2024-02-15 23:06:41 -05:00
08bdf1abae
Avoid drawing netnames when not in board editor
...
Shouldn't be needed if we properly clear the netinfo but there's no
reason to keep netnames so better to avoid possible issues
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16981
2024-02-15 17:17:22 -08:00
c48fc7ebff
Fix crash due to PCB_SHAPEs not being returned by BOARD::AllConnectedItems
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16981
2024-02-15 19:58:21 -05:00
4ec390838b
Re-enable non-KiCad board import when non-standalone
...
Partial revert of ec2cd99405https://gitlab.com/kicad/code/kicad/-/issues/16978
2024-02-15 12:14:32 -05:00
7b0bb59b37
Remove hard-coded versioned env vars in most places
2024-02-15 15:31:08 +00:00
6c1273ca12
PCB Parsing: only parse old properties before PCB fields addition
2024-02-14 09:35:10 -05:00
8e6fe0eaf0
Gerbview settings: store option "Page Limits" in gerbview config.
...
Previously this appearance option in Layer Manager was not stored.
2024-02-14 11:21:55 +01:00
0d1945def7
Gerber drill file: do not flash oblong holes: they must be routed.
...
Fixes #16962
https://gitlab.com/kicad/code/kicad/-/issues/16962
2024-02-14 09:22:49 +01:00
f73d45b0cf
Add $schema prop to drc/erc
2024-02-13 19:08:55 -05:00
b86bf19328
Make shape properties layer selection obey cancel command
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16735
2024-02-13 20:31:05 +00:00
3cd61a2d39
PCB: appending boards should not select existing generators
2024-02-13 10:15:30 -05:00
0cf433b28e
CONVERT_TOOL::CreateLines() doesn't use SKIP_STRUCT flag.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16930
2024-02-12 23:59:33 +00:00
ca148fb4d1
pns_debug_tool: Fix "save as" to save log file with new router state
2024-02-12 21:22:57 +01:00
7e4e80a2e5
DRC library parity attribute tests: disable DNP and EXCLUDE from BOM.
...
They are related to a design, not to a footprint, and are tested in
schematic parity tests.
2024-02-12 10:55:56 +01:00
2afe4db945
Add some missing newlines in cli output without changing strings
2024-02-11 21:12:21 -05:00
6a37f99e94
Fix crash if we exit lib table setup
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16917
2024-02-11 21:05:23 -05:00
d694bb5960
Use file name rather than path for erc/drc json and text reports
2024-02-11 20:16:22 -05:00
622c2f1316
Make sure connectivity is updated in undo/redo
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16945
2024-02-11 20:01:15 -05:00
e51ddc52b7
Fix crash writing json drc report
2024-02-11 17:36:56 -05:00
b5982f7319
EasyEDA import: force close some line chains.
2024-02-11 23:52:56 +03:00
fe1579ebbd
BOARD_NETLIST_UPDATER: fix issue when reading net-lists having no FOOTPRINT_FIELD
...
they can be old net-lists or non Kicad net-lists.
Fixes #16931
https://gitlab.com/kicad/code/kicad/-/issues/16931
2024-02-11 21:03:00 +01:00
e9be95741b
Deconflict hotkey for Route from Other End
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16415
2024-02-11 10:58:38 -05:00
ec2cd99405
Guard actions that change project against running in non-standalone mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16942
2024-02-11 09:36:17 -05:00
3a6d74a3b3
Allow user to select location to save router event log
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16904
Note: no new strings added
"Unable to write '%s'." is from pagelayout_editor/files.cpp(182)
2024-02-11 13:43:55 +01:00
2b295f85f5
Fix corner radius for 0 amplitude meanders.
2024-02-10 08:36:50 +03:00
ff17a22e31
Internationalize Image Properties dialogs.
2024-02-10 08:34:19 +03:00
cd548e392a
Add document type icons
...
Update Macos script to use doctype icons for icns builds
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14754
2024-02-09 15:55:57 -08:00
f303996f9c
Add new icons for tools
...
Align elements to grid
Cleanup graphics
Cleanup tracks/vias
Drag
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16206
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16205
2024-02-09 15:55:57 -08:00
cabbab9a5f
Move pcbnew drag to move specific icon
2024-02-09 15:55:57 -08:00
fcdd34f58b
Reserve strings for Tune Length
2024-02-10 02:44:05 +03:00
2121227194
Fix nullptr group assert in tracks cleaner.
2024-02-10 00:44:05 +03:00
d4e89543de
Length-tuning fixes/improvements:
...
- Ensure correct amplitude values in tuning patterns.
- Support lower amplitudes in DP length tuning
- Ensure correct minimal inner radius in DP length tuning
2024-02-10 00:44:05 +03:00
2933cdf636
Extend NETLIST lifetime for JobExportDrc
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16925
2024-02-09 22:14:36 +01:00
453e185613
Increase unconstrained tuning length to 1km.
2024-02-09 19:25:46 +03:00
63fc89cafd
Import graphic items on copper layers.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16916
2024-02-09 13:56:01 +00:00
91e15634fc
Re-use ERC's delete-exclusions-query dialog for DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16914
2024-02-09 11:21:06 +00:00
4905c37712
Streamline explodePad undo.
...
Also fixes a bug where new shapes were added to the view
twice.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16888
2024-02-09 10:08:37 +00:00
037f349585
Make expand connection work on generated tracks
2024-02-08 19:28:28 -05:00
53d048921a
Fix merge conflicts.
2024-02-09 00:04:43 +00:00
7929d7cda2
Fix build
2024-02-08 17:33:34 -05:00
ecbe1df7c1
Update target length/skew to std::optional.
...
Also fixes a bug in the router where the target length would
get trashed if set to maxLongLongInt. (We'd add the default
tolerance to it sending it negative.)
2024-02-08 18:14:31 +00:00
e62b4f8ff4
Add nullable int and double to property system.
2024-02-08 18:14:31 +00:00
876449b83d
Set DP skew meanders max length to INT32_MAX instead of 100 mm.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16860
2024-02-08 19:34:17 +03:00
f4cf23e5cf
Length tuning: fix status popup display when unconstrained.
2024-02-08 18:55:42 +03:00
b979f52364
FP Editor: show hidden texts when we should
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/16909
2024-02-08 10:28:23 -05:00
abb1915114
Missed a checkbox for Select All in Import Settings
2024-02-08 15:01:23 +00:00
f1caa262a6
Separate actions for single track and differential pair length tuning.
2024-02-08 14:58:28 +00:00
6e0d97df76
Do not cache invisible text objects
...
In some cases, extremely long, invisible texts can fill and crash opengl
buffers
2024-02-07 15:26:41 -08:00
bce372c8a3
Don't clear the undo/redo list when we're just trimming it.
...
We only allow a certain number of commands on the lists
and trim them when they overflow. PCB_BASE_EDIT_FRAME and
PL_EDITOR_FRAME implemented this correctly; SCH_EDIT_FRAME
and SYMBOL_EDIT_FRAME did not.
2024-02-07 14:52:10 +00:00
1e6986d2f5
Don't report starved thermals when connected only to isolated islands.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16866
2024-02-07 14:09:03 +00:00
e6929b2184
Tooltip for "Prefer zone connections".
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16587
2024-02-05 19:22:41 +00:00
d30361b425
Increase artificial via preference further.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16880
2024-02-05 19:20:33 +00:00
1ff36f23b8
Clean up stale TODOs.
2024-02-05 15:49:57 +00:00
da46a96623
Update a few strings based on new string freeze policy.
2024-02-05 15:49:57 +00:00
7ea1568802
Fix selection tool behavior in footprint viewer
...
The footprint viewer isn't an edit frame, so we need to access the
settings through the base frame type instead. Also, double click makes
no sense in the footprint viewer, and just leads to weird results
sometimes.
Fixes Sentry KICAD-7A2
2024-02-05 14:50:17 +00:00
835500bf1c
Hide the color prop from pcb editor
2024-02-05 01:13:16 -05:00
3960c53225
A few tweaks for hidpi
2024-02-05 00:52:11 -05:00
0370db43ae
A footprint does it's own child hit testing.
...
We only need to add it for groups.
2024-02-04 23:16:43 +00:00
77c19fa99a
Fill in missing zone properties.
...
Also fixes some bugs with hatch properties being available
on rule areas.
2024-02-04 23:01:31 +00:00
5d0abd3b01
Use CallAfter instead of Idle event hack for drc dialog item selection
2024-02-04 12:37:56 -05:00
cab351d249
Don't do a sided-test on a footprint which has no side.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15284
2024-02-04 15:18:23 +00:00
4e0b48a03a
ZONE_SETTINGS init belongs in ZONE_SETTINGS's ctor.
...
(Not in ZONE's ctor.)
2024-02-03 20:17:31 +00:00
5379a1d863
Nullptr protection.
2024-02-03 20:17:31 +00:00
2fc96c1d11
Ensure stackup material returned is correct after list item deletion
2024-02-03 18:06:40 +00:00
5c86247e21
Fix inactive cells being black in default settings panels on MSW.
2024-02-03 21:00:28 +03:00
dc6fb73b40
Fix mistake in 7edda82b where any key could delete the material
2024-02-03 17:01:57 +00:00
7edda82b2a
Hook up delete key in stackup materials list box
...
Allow the delete key to delete a material from the stackup list, since
otherwise there is no way to delete materials from the list.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16854
2024-02-03 16:39:56 +00:00
92c2ddf77a
Do not parent dialogs to non top level windows in panels or widgets.
2024-02-03 10:40:28 -05:00
4d49762714
Remove Export Settings to Other Similar Zones.
...
The UI for it is clunky (Cancel afterwards doesn't do what
you think it might), the undo code is all hand-rolled (and
possibly buggy?), and we have the Property Inspector now
for this type of stuff.
2024-02-03 13:22:16 +00:00
0890ac57dd
Improve clarity of default zone settings.
2024-02-03 13:22:16 +00:00
d9737a39bf
remove qr footprint generator min pixel size
...
The minimum pixel width should be left for the user to decide, since it
depends on the manufacturer and layer.
2024-02-03 09:37:29 +00:00
239cbb4637
Use Fit to size the layer box after sitting min size
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16862
2024-02-02 23:43:05 -05:00
b354b24182
Revert "Call Layout after calculating layer combobox size to ensure it takes effect"
...
This reverts commit cd8eb23c3e
2024-02-03 04:32:36 +00:00
cd8eb23c3e
Call Layout after calculating layer combobox size to ensure it takes effect
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16862
2024-02-02 23:11:48 -05:00
7cc663ad77
Schematic parity checking for CLI DRC.
2024-02-02 23:05:37 +00:00
2b1bf369f2
Do not parent file or directory dialogs to panels.
...
Parenting dialogs to child windows of top level windows is most likely
not defined behavior. It's also likely that this behavior varies across
platforms so it' best not to risk doing it. wxWidgets does not check if
the dialog parent is actually a top level window. There may be other
places we are doing this with our message dialogs so we should do an
audit.
2024-02-02 09:20:36 -05:00
4a1245e85a
STEP: export copper plating for vias/pads (25 micrometers).
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16694
2024-02-02 00:29:03 +03:00
a485a4815c
Clear text before replacing in ImportSettingsFrom.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16851
2024-02-01 17:37:27 +00:00
285067dad1
Altium PCB: support polygon id 65534 for keepout tracks on board outline.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16849
2024-02-01 12:15:06 +03:00
7c6ee16b22
removed the dots for several strings in the settings dialog
...
https://gitlab.com/kicad/code/kicad/-/issues/16651
2024-02-01 08:52:57 +00:00
1122d80388
Better support for arcs in tuning patterns.
2024-01-31 23:38:05 +03:00
7d1888c756
Add parts of arcs to tuning patterns correctly.
2024-01-31 21:45:01 +03:00
e9fbb36538
SHAPE_LINE_CHAIN: Fix and simplify NextShape() + remove PrevShape()
...
NextShape() function was too complex (trying to go back and forwards).
We only used PrevShape() in one place, so removed that usage.
Added QA tests
2024-01-31 19:17:46 +03:00
079478f989
EDA_ANGLE: use constexpr for constant angles
...
Remove all statics in the class and instead use constexpr to
ensure correct ordering
2024-01-31 19:17:46 +03:00
19560f0281
Fix pad edit mode undo.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16835
2024-01-31 15:45:58 +00:00
4b12534dbd
Fix property editor for graphic circles
2024-01-30 22:00:09 -05:00
c8d24b7613
Add missing IPC2581 cli support
2024-01-30 20:42:34 -05:00
32d589a121
Don't rely on baselines for fetching DRC_RULE items.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16816
2024-01-30 13:19:04 +00:00
5b5c6f0474
Init tuning pattern settings from BOARD_DESIGN_SETTINGS.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16819
2024-01-30 13:19:04 +00:00
88cc029ad3
Enable meander radius for diff-pairs.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16820
2024-01-30 13:19:04 +00:00
d7471d8c2f
Remove tooltip of questionable value.
2024-01-29 23:24:49 +00:00
3ed196859f
STEP export: build a segment from last point for segment case as well.
...
https://gitlab.com/kicad/code/kicad/-/issues/16807
2024-01-29 19:59:41 +03:00
b12d0dfd67
Fix pad offset removal vs hole offset
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16767
2024-01-29 08:22:23 -08:00
ee5e2e56c0
Naming conventions; no functional changes.
2024-01-29 16:00:06 +00:00
5c94e0287b
Clean up tuning pattern if undo triggered during drag
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16718
2024-01-28 16:10:59 -05:00
00aed2aa3e
Don't attempt to test for recursion on unsaved file.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16722
2024-01-28 15:37:08 +00:00
071d8af5d7
Don't include text in footprint preview widget's autozoom.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16794
2024-01-28 14:35:01 +00:00
06d63a2aa0
pcb_io_kicad_sexpr_parser.cpp: init a default board stackup only if no stackup
...
is defined, and only after the enabled layers are defined.
Fixes #16754
https://gitlab.com/kicad/code/kicad/-/issues/16754
2024-01-28 14:23:50 +01:00
995c4af51d
Deleted items must have their ownership changed to undo/redo.
2024-01-28 11:13:48 +00:00
9eb8ec7733
Comments and menu-capitalisation.
2024-01-28 11:13:48 +00:00
27534074ac
Fix errors resulting from FP fields being moved from m_drawings to m_fields.
2024-01-28 11:13:48 +00:00
ade987c101
Fix logic errors in undo while drawing rectangles.
...
Draw 2 rectangles. Start drawing a third, but don't
complete. Hit Ctrl-Z instead. Boom.
2024-01-27 21:18:50 +00:00
eacebe63f1
We do undo on individual footprint children now.
...
Adding a commit record for the parent means we replace the
parent first on undo and then if a child was added we can't
find it to remove it.
2024-01-27 20:26:50 +00:00
07cefa7883
More active tracking of undo/redo items.
2024-01-27 20:02:40 +00:00
f7752ce0a1
Cleanup dead code.
2024-01-27 17:45:48 +00:00
715a5ee47b
array_creator: fix issues (crashes) in board editor and footprint editor:
...
- In fp editor, fields cannot be duplicated: each is unique.
duplicating fields created a crash and issues in undo/redo command
- In board editor after creating an array with footprints.
- crash when closing pcbnew
- error when undoing the array creation
The crash was due to call run this_item->RunOnDescendants() on footprints: it
must be run only on a PCB_GROUP.
2024-01-27 17:02:20 +01:00
a8f6329590
Remove stale comment.
2024-01-27 15:52:59 +00:00
96297b50a1
Remove padstack offset value
...
We encode the pad locations for the package in the pin, so we don't need
an additional offset from the pin location
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16767
2024-01-26 10:53:36 -08:00
89f8c5d918
PCB_SELECTION_TOOL::selectPoint() Remove items disabled by the selection filter
...
before using any other filter. This avoid to select an item from the candidate
list that cannot be selected and eliminate another candidate.
Fixes #16755
https://gitlab.com/kicad/code/kicad/-/issues/16755
2024-01-26 19:13:50 +01:00
c5bd62434b
Zero out number of non-numberable pads in ImportSettingsFrom().
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16769
2024-01-26 14:05:04 +00:00
053a0aade7
Formatting & commenting.
2024-01-26 14:05:04 +00:00
cc058a7927
Exit pad edit mode before closing footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16766
2024-01-26 13:49:17 +00:00
f4e123f57e
!m_isBoardEditor != m_isFootprintEditor.
...
(There's also python, cli, etc.)
2024-01-26 12:47:01 +00:00
465ccaef90
Add missing schematic parity drc test to cli
2024-01-25 22:14:49 -05:00
a282762686
Fix pcb drc in cli due to awkward !m_isBoardEditor logic with more awkward logic
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16744
2024-01-25 22:09:29 -05:00
9e9dfb38d1
IPC2581: Correct flipped pad handling
...
Board footprints have pads already flipped, so we don't need to adjust
layers when outputting
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16659
2024-01-25 13:06:59 -08:00
b3f94ad46a
Cleanup before exit.
...
Possibly KICAD-5TE.
2024-01-25 15:30:25 +00:00
a377fa4201
Add some missing deep comparisions for BOARD_STACKUP
2024-01-25 09:08:27 -05:00
fec57459f3
Use correct arg types in altium arc import error message
...
Fixes KICAD-6Q1
2024-01-25 07:50:13 -05:00
3ef16221fe
Make sure default board thickness exists
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16733
2024-01-24 23:09:56 -05:00
d04b21c6d6
Ensure parameter typeinfo matches the actual object's typeinfo
...
AppleClang seems to generate different typeinfo for forward declarations
of classes than the actual class object, so the any_cast for the pointer
parameter fails due to the types not matching (even when they look the
same when printed in the error).
Instead, we must always ensure we use the actual object when defining
the parameter type when placing the object into the event.
2024-01-24 16:14:32 +00:00
Seth Hillbrand
Alex Shvartzkop
Jeff Young
Armin Schoisswohl
Yon Uriarte
SubaruArai
Mike Williams
jean-pierre charras
Wayne Stambaugh
JamesJ
Marek Roszko
Jon Evans
Roberto Fernandez Bautista
Jan Wichmann
Ethan Chien
aris-kimi
Stefan
Tomasz Wlostowski
Ian McInerney
Ian McInerney
Lucas Dumont
arturo182
Subaru Arai
Ma Han