Keystroke zoom (F1/F2) always centered the screen, because it
was handled as ID_POPUP_ZOOM_IN event. Mousewheel scrolling
was ok, because it is handled using different event based
on the configuration.
This patch introduces special event ids for keystroke
zooming that are then properly translated to either
ID_POPUP_ZOOM_IN or ID_OFFCENTER_ZOOM_IN depending
on the configuration.
The same issue is fixed for legacy canvas pcbnew.
Fixes: lp:1742567
* https://bugs.launchpad.net/kicad/+bug/1742567
Signed-off-by: Martin Sivak <mars@montik.net>
PICKED_ITEMS_LIST knows the architecture of the undo commands so
that it can delete those ITEMs which it owns. This represents poor
encapsulation so instead of adding yet another case, I added a
UR_TRANSIENT item flag which is set by callers whenever they create
new objects to “give to” the undo/redo stack. This allowed some
cleanup of other code, but cleaning up UR_DELETE and UR_WIRE_IMAGE
will be a bigger task and have to wait for another day.
Fixes: lp:1542018
* https://bugs.launchpad.net/kicad/+bug/1542018
1) Edit Symbol gets similar fix as Place Symbol
2) progress dialog updating reduced to once every 50ms
3) SearchText gets lazy normalization
4) TypeNames get lazy translation
5) default fieldNames get translated a single time per language change
These fixes reduce first-load-time of both Edit Symbol and Place Symbol
by about 2/3, and second-load-time of Edit Symbol to near-instantaneous.
Spice netlist exporter processes all texts on the exported schematic
sheet to find spice directives and include them in the output file.
By default it also added ".title KiCad schematic" in the first line, so
if there was another .title directive in the exported schematic sheet,
the generated file would contain two .title directives.
This patch looks for .title directive and when one is found - it uses
the specified title in the first line.
This commit aims at making the pin edit coupling easier to understand.
It renames the mode to 'synchronized pin edit', shortens the description
and inverts the logic to avoid double negation.
To make the code clearer, two items have their name changed to fit the
new description:
- m_editPinsSeparately -> m_syncPinEdit
- ID_LIBEDIT_EDIT_PIN_BY_PIN -> ID_LIBEDIT_SYNC_PIN_EDIT
This adds a set of conditions that will prevent a wire from being
automatically trimmed. Wires that are currently being moved or are
newly created or are explicitly avoided will not be removed. This also
adds a function to set a flag on items in a block.
Fixes: lp:1744632
* https://bugs.launchpad.net/kicad/+bug/1744632
Don't use wxFileName == operator when comparing cache file name. There
is a lot of overhead the wxFileName == operator that is not necessary
so just do a comparison with the original string used to create the
cache.
Rename GetPolyPoint() to BuildPolyPointsList(), because GetPolyPoint() looks like an accessor, but it is not an accessor.
(Using it as accessor can creates a *very long calculation time* for very basic access to polygon vertices)
Fixes: lp:1745050
https://bugs.launchpad.net/kicad/+bug/1745050
The alias list now displays the user model (multiple aliases *of*
a root part, rather than a collection of names *including* the
root part). This simplified the error detection logic, fixing
the first bug in the bug report.
Updating the part in the library is now done uniformly on OK
(which was the second bug in the bug report).
Fixes: lp:1744656
* https://bugs.launchpad.net/kicad/+bug/1744656
The crash happened when during rename operation, when the original part
buffer has been marked as deleted, but its memory was not yet freed. The
renamed part was still using the original SCH_SCREEN object, which was
freed together with the original part buffer.
The highlight colour on some platforms (OSX, for instance)
renders nearly invisible against a white background. However,
wxWidgets doesn't handle background colours on OSX and GTK+.
A separate commit to the new kicad/wxWidgets fork fixes OSX,
and we continue to use the old highlighting on GTK+
Fixes: lp:1741719
* https://bugs.launchpad.net/kicad/+bug/1741719
Three interrelated issues:
1) Implement an undo/redo type for renames so that we know to delete
the old lib entry and add a new lib entry
2) When doing so (for the undo/redo OR the original edit), we must
make a copy of the 'original' LIB_PART which is used for revert, and
hand it to the new lib entry
3) When comparing a modified component tree item with the current item
we must also check for aliases.
Fixes: lp:1743857
* https://bugs.launchpad.net/kicad/+bug/1743857
Fixes: lp:1744371
* https://bugs.launchpad.net/kicad/+bug/1744371
Fixes: lp:1744373
* https://bugs.launchpad.net/kicad/+bug/1744373
At least on Linux, if a null icon is used as icon in Pin Type column, other icons are not
displayed. So the workaround is to use a neutral icon when a specific icon cannot be used
(i.e. when pins are grouped)
Fixes: lp:1559542
https://bugs.launchpad.net/kicad/+bug/1559542
Schematic cleanup only makes sense after the libraries are fully updated
and loaded. Before pin caching, this was a minor difference but once we
needed to update pin caches, schematic cleanup can remove junctions from
pin-wire connections incorrectly.
Instead, we use the global OpenProjectFiles() schematic cleanup call to
be sufficient and not call a second time, prior to all libraries being
rescued and loaded.
Fixes: lp:1743148
* https://bugs.launchpad.net/kicad/+bug/1743148
Major cleanup of many icons (started as a simple effort to tweak libedit and modedit icons)
Ref: https://lists.launchpad.net/kicad-developers/msg32860.html
* Each application icon has been updated
* Consolidated icon "modifiers" across many icons
* Replaced confusing arrows with "load" and "save" icons
* Slight code updates to reference correct icons
* Consolidate multiple representations of single icon type(s)
The component tree model was always saving the root symbol name which
prevented the actual alias from be selected in the symbol chooser
dialog. This also prevented the correct documentation information
from being shown in the information panel.
Fixes lp:1740742
https://bugs.launchpad.net/kicad/+bug/1740742
Change the behavior of the remapping algorithm to remap even if a
project symbol library table exists in the project file in case a
previous attempt to remap failed. The existing symbol library table
is backed up to the back folder and rebuilt.
Fixes lp:1741983
https://bugs.launchpad.net/kicad/+bug/1741983
This is meant as a stopgap for 5.0, with plans to add proper scaled
icons in the 6.0 cycle. A function KiScaledBitmap() is added, which
works like KiBitmap() except it scales the bitmap according to the
calling window's font size. Controls have been added to all the main
applications to let the user select scaling manually (these were omitted
from smaller apps that didn't already have a place to put them).
In addition, in eeschema only, the pixel height of the system font is
shown in the options dialog for diagnostics. This is only for collecting
feedback before 5.0 release from users with different displays and will
be removed.
File names with spaces were causing invalid symbol names in both the
rescue library and the cache which would cause both libraries to fail
to load because library symbol names are not escaped so the spaces
tripped up the library parser. Replace the spaces in the file names
with hyphens and in both the rescuer and the remapping code so the
library nickname in the symbol library table does not contain spaces.
Update the symbol library table dialog to prevent users from defining
library nicknames with spaces. This is different than the footprint
library table which allows nicknames with spaces. This solution is
a temporary fix until the new symbol library and schematic file formats
are implemented.
Fix off by one row in illegal nickname error message in the symbol
library table editor.
Crash was caused by removal of the selected item from the
wxDataViewModel, which was later accessed in
COMPONENT_TREE::GetSelectedLibId(). To avoid the problem, the selection
is validated before regenerating the tree widget.
Fixes: lp:1740952
* https://bugs.launchpad.net/kicad/+bug/1740952
This commit is a partial revert of aa81f5b9 & 445ac505. LIB_ID should
not be modified when a library is assigned to its part, as the library
nickname cannot be evaluated during the assignment and might be
different than its filename.
Fix a bug where the full LIB_ID was not being used to look up the name
of the symbol in the cache library preventing the rescue to work when
rescuing symbol library table projects.
Add information as to why a symbol was rescued rather than only showing
what symbols were rescued.
Do not add rescue suffix to symbol name for symbol library table rescues
because if a symbol name exists in multiple libraries that need rescued
at the same time will cause subsequent symbol rescues to be overwritten.
Append the nickname of the schematic symbol library to prevent symbol
name clashes in the rescue library.
Verify the library symbol of the field being edited still exists rather
than use an assertion because it is entirely feasible that the library
symbol or library containing this symbol has been deleted and will cause
a segfault. Unfortunately there is no way to determine if the symbol is
a power symbol or not so just set it as a regular symbol so the user can
still edit the schematic symbol field.
Fixes lp:1742111
https://bugs.launchpad.net/kicad/+bug/1742111
When a LIB_PART object is removed, it deletes all of its aliases.
When the last one is removed, it tries to report the name of the
parent part, but as it has no aliases - it cannot return a valid name.
Use the symbol found in the library when the symbol is not in the cache
library.
Add an assert to prevent dereferncing a null pointer in the future even
thought this should not happen as the rescue algorithm does not add a
candidate when a symbol cannot be found in either the cache or any other
library.
Fixes lp:1741964
https://bugs.launchpad.net/kicad/+bug/1741964
Calling wxListBox::SetSelection( wxNOT_FOUND ) changes the internal
state of the widget without the intended visual effect (show nothing
selected). It leads to a situation when the default choice is overridden
with wxNOT_FOUND, even though the list box shows a valid value.
As there is no point in calling wxListBox::SetSelection( wxNOT_FOUND ),
the confusing call has been removed.
Dialogs displaying a lot of scrollable data should use SetSizeInDU()
instead, as FinishDialogSettings() will set a minimum size equal to
whatever can contain all the data (making it overflow the screen for
large amounts).
- Add helper methods for DPI-independent sizes
- Make splitter sashes visible on macOS
- Remove SetSizeInChars() - wx has a built-in way that I missed
- DIALOG_CHOOSE_COMPONENT: DPI-indep splitter sizes
- DIALOG_RESCUE_EACH: DPI-indep default size and sensible HTML window
size
- COMPONENT_TREE: DPI-indep sizing
- DIALOG_FP_LIB_TABLE, DIALOG_SYMBOL_LIB_TABLE
CHANGED: When a workbook file is saved from the simulation dialog
in eeschema, the extension is automatically added if it is not
specified. This behaviour is consistent with the workbook loading
dialog, which filters the filelist for only ".wbk" files with no
"all files" option.
Change term "Flip Horizontal" to "Mirror About Horizontal(X) Axis" in
the schematic editor symbol context menu to improve clarity.
Change term "Flip Vertical" to "Mirror About Vertical(Y) Axis" in the
schematic editor symbol context menu to improve clarity.
Change to the same mirror terminology in the block context menu.
Change "Exchange Footprint" to "Change Footprint" in the board footprint
context menu for improved clarity.
Fixes lp:1740593
https://bugs.launchpad.net/kicad/+bug/1740593
Create separate folder in project path to backup files changed during
remapping.
Add time stamp to backup file names in case multiple remappings are
performed.
Add backup file information to report panel instead of using debug
trace messages.
Disable the remap button if the user does not have write privileges to
the current project path.
The Windows drive specifier C: was being interpreted as a valid URL by
wxURI which was performing a URL comparison instead of a file comparison
which always failed in LIB_TABLE_BASE::FindRowByURI(). Change test for
URI to search string for "://" to determine if the comparison should be
a URI (string) comparison or a file (wxFileName) comparison.
Don't run final rescue unless the user performs the remapping.
When an attempt to resolve a library symbol link having a library
nickname that was no longer found in the symbol library table, the
symbol resolution was not falling back to the cache library due to
a silently handled exception. Add check for valid symbol library
table nickname before attempting to resolve symbol link to prevent
exception bypassing falling back to the cache library.
Fixes lp:1740609
https://bugs.launchpad.net/kicad/+bug/1740609
A new legacy symbol library plugin deletes all of the aliases from each
LIB_PART object that it owns cause an assertion in the dtor which calls
GetName() which checks for an empty alias list to prevent a segfault.
Remove the call to GetName() from the dtor trace message.
Fixes lp:1740597
https://bugs.launchpad.net/kicad/+bug/1740597
Store the currently-edited item in the base screen class
instead of the libedit_frame. This allows us to access it
for double-click disambiguation and harmonizes the library
editor with the schematic editor code that already does this.
Fixes: lp:1738694
* https://bugs.launchpad.net/kicad/+bug/1738694
The GetName() method attempts to access the first LIB_ALIAS pointer in
the m_aliases member without checking if m_aliases is empty. This
should never happen because a new LIB_PART creates a LIB_ALIAS object
in the ctor. Some how, this is getting bypassed and causing Eeschema
to crash in the LIB_PART dtor on debug builds. GetName() now checks
for an empty alias list to prevent a null pointer segfault.
Fixes lp:1739614
https://bugs.launchpad.net/kicad/+bug/1739614
Improve dialog layout and fix UI policy issues with all of the dialog
boxes in the common, 3D viewer, CvPcb, and Eeschema code paths.
Updated the use of component to symbol.
Replace all instances of "component" and "part" with "symbol" when
referring to schematic and library symbols.
Replace all instances of "component" with "footprint" when referring to
board and library footprints.
Minor dialog layout fixes to some of the dialogs impacted by the UI
string changes.
The remapping utility would create a new project specific library when a
symbolic link pointed to a library already defined in the symbol library
table. Now the comparison checks to see if the library path and file
name are actually a symbolic link if the file names are not the same when
the symbol library table entry is a file name rather than a URL. URLs
are simple string comparisons.
Disable the remap button after the remapping completed.
Remove some commented out code from the edit symbol in schematic dialog.
Fixes lp:1738634
https://bugs.launchpad.net/kicad/+bug/1738634
Allows buses to acquire junctions based on their connections. Buses
can only have junctions with other buses. Also allows buses to be
draggable junctions for collections
This adjusts the selection addition criteria for
blocks to allow items such as labels to connect to
lines not at the endpoints. It also uses the same
logic to correctly gather bus-wire, bus-bus entries.
Fixes: lp:1738941
* https://bugs.launchpad.net/kicad/+bug/1738941
Apparently explicitly requesting a column to be sorted breaks component
filtering on Windows. Without SetSortOrder() call the list is sorted and
filtering still works as expected.
Fixes: lp:1739412
* https://bugs.launchpad.net/kicad/+bug/1739412
Please never ask me about the SetSortOrder() part. When it is set to
'true', wxDataViewCtrl::EnsureVisible() does not always work correctly,
so sometimes the best search result is not shown in the window (no
pattern found). Now it is set to 'false' to avoid the described
behavior, but the sorting order is reversed on Windows, not on Linux.
I could not test it on OSX, but I am sure it paints walls in your room
pink. /me burst into tears.
Fixes: lp:1738696
* https://bugs.launchpad.net/kicad/+bug/1738696
Enable "save curr lib" tool of main toolbar when modified even if this lib is empty.
It happens when all items are erased, and it is consistent with the close libedit dialog
that ask for saving all modified libraries
Standalone eeschema did not have the project path set when importing
a non-KiCad sheet. Due to this any libraries created during the import
were saved to the directory of eeschema executable instead of the actual
schematic directory.
The previous implementation relied only on the project name. When it is
set, the imported library was named '-eagle-import'. Now it tries
the project name and then the file name, using 'noname-eagle-import'
as fallback.
The library name is stored in the plugin to avoid changing the library
name after the project name has been set.
Marks wire-bus entries as not dangling if there is at least a wire
and a bus on each end. Corrects behavior when wires and buses overlap
at the endpoint.
The reason the component tree widget was cleared on Windows is the fact
m_adapter->UpdateSearchString( m_query_ctrl->GetLineText( 0 ) ) is
called on any change of the symbol. But if m_query_ctrl is empty,
m_query_ctrl->GetLineText( 0 ) returns the "hint" (currently the word
"Search") not the actual value, so there is no "candidate" symbol in
list. Using m_query_ctrl->GetValue() returns the actual value and fixes
this issue.
Fixes: lp:1737132
* https://bugs.launchpad.net/kicad/+bug/1737132
Pins are weak_ptrs to the library, so they require a lock() before
accessing. This imposes a performance hit on fast loops that access
the pin list repeatedly. This patch caches the pin position locally
for each component, updating only when needed.
Fixes: lp:1737363
* https://bugs.launchpad.net/kicad/+bug/1737363
COMPONENT_TREE::STATE used wxDataViewItem to store the selection, but it
will point to a deleted object if the selection was removed. Switched to
storing the selection using LIB_ID as it is much safer to use.
Show the NC box only on pins connected via the same component,
indicating a stacked pin group. Do not show NC box on pins for
different components with the same symbol.
If a schematic contains two symbols with the same name from different
libraries, the cache will contain the last symbol saved with that name.
Prepend the library nickname with the original schematic symbol library
nickname when saving the cache library to prevent name collisions.
With the implementation of the legacy schematic plugin, any I/O error
when parsing the schematics would prevent the entire schematic from
being loaded. This change restores (somewhat) the previous behavior
where as long as the root schematic is loaded properly, then all of
the remaining sub-sheet will attempt to load.
Add GetError() method the SCH_PLUGIN object to allow for partial
schematic loading.
Check the error message contents when no exception was caught to warn
the user of any accumulated errors.
Fixes lp:1690644
https://bugs.launchpad.net/kicad/+bug/1690644
Fixes the connection display and dragging behavior of wires,
busses and their entries.
The implemented drag logic is:
-busses and bus-bus entries drag each other when connected at endpoints
-wires and wire-bus entries drag each other when connected at endpoints
-entries do not drag wires or busses when connected to wire middles
-wire-bus entries do not drag busses
The implemented connection logic is:
-bus-bus entries connect busses to busses but not wires
-wire-bus entries connect wires to busses but not wire to wires or
busses to busses
It turns out the fastest way to update wxDataViewCtrl is to nuke the
model and rebuild it from scratch rather than via
ItemAdded()/ItemDeleted() update notifications.
Fixes: lp:1734773
* https://bugs.launchpad.net/kicad/+bug/1734773
CHANGE: In Eeschema, when placing a component directly over an existing
wire, the wire is automatically removed where it shorted pins.
This helps workflow in Eeschema, allowing one to quickly add components
to existing lines.
Fixes: lp:1678449
* https://bugs.launchpad.net/kicad/+bug/1678449
This is the last of the object save/load code that was not moved into
the SCH_LEGACY_PLUGIN object. All schematic and library I/O is now
performed in the SCH_LEGACY_PLUGIN object and as been removed from the
schematic and library objects.
The old single symbol file format has been replaced with the normal
symbol library file format since there was no difference between them
except the SYMBOL token. The SYMBOL token was no longer being read
since the introduction of the SCH_LEGACY_PLUGIN symbol library loader.
Update the Doxygen comments in all of the modified files.
BreakSegment now breaks a known segment and BreakSegments
breaks all segments. This allows functions to break a
segment without needing to iterate through the whole list.
Changes to the schematic shouldn't be made
where the user isn't looking. Removing the
cleanup in ERC and netlisting prevents
unintended consequences
CHANGE: ERC and Netlist calls do not modify schematic
SCH_LINE can represent a bus, wire or graphic line. Checking
for the corner needs to distinguish between these types.
Fixes: lp:1635984
* https://bugs.launchpad.net/kicad/+bug/1635984
Make the user prompt an HTML control for improved layout.
Fix some column title sizing issues. This is not a complete fix but
it seems better than the default sizing done by wxWidgets.
Use symbol terminology instead of part and/or component.
Create trace string source files for a common place for them and their
Doxygen comments.
Don't back up schematic files unless the user requests a remap.
Back up all files that could be changed by a remap including the
schematic file(s), cache library, project file, and rescue library
files.
Use an HTML control instead of a static text control for improved layout
of the user remap prompt.
Improve the user prompt in the remap dialog to make it clear that changes
will be made to project files.
Duplicated aliases were given " (copy x)" suffix. There are two
problems: aliases cannot contain spaces and the string was translatable
which could create more issues. Now duplicated aliases receive "_x" suffix.
Change the legacy schematic plugin to preserve illegal LIB_ID characters
when load schematics prior to version 4.
Check for illegal LIB_ID symbol names during project rescue. Rename and
rescue any symbols with illegal LIB_ID names.
Add static methods to LIB_ID object for testing for and fixing names
with illegal characters so there is uniform code for doing so.
Update the Eagle plugin symbol loader to fix symbol names using the new
LIB_ID fix illegal names method.
Fixes lp:1732236
https://bugs.launchpad.net/kicad/+bug/1732236
Dragging a full line that is connected to a component
now drags the component as part of the block, maintaining
connections.
Fixes: lp:1167714
* https://bugs.launchpad.net/kicad/+bug/1167714
Removed cut & copy toolbar icons in the schematic editor, as they
were inaccessible. One cannot have an item selected and move the
mouse outside the canvas area due to autopanning.
Added paste icon to the library editor.
Tree nodes now have an additional field 'InTree' to determine
if the view is aware of its existence. This way, there is no need
to rebuild the data structures from scratch when they need to be
filtered.
Library Editor updates its working copy of the edited part every time
it is modified. If LIB_EDIT_FRAME::PlacePin() calls OnModify() too early,
the working copy does not include the last change.
Updates LIB_ID::LibItemName field when a part is renamed and LIB_PART
name when a new LIB_ID is set.
Similarly, LIB_ID::LibNickName field is updated when a library set, but
there is no easy way to assign library when LIB_ID::LibNickName is
modified.
LIB_PART name is stored in three places that might be changed
independently:
- the first LIB_ALIAS in m_aliases
- LIB_FIELD with VALUE ID
- m_name wxString field
This is potentially leads to an incoherent LIB_PART state. To prevent
this, all fields are changed using only one method: LIB_PART::SetName().
LIB_PART::m_name has been removed as the same information is available
in two other variables.
Handle exception in best zoom method when a symbol could not be loaded
from the symbol library table. This was triggered by an empty symbol
library table but could be triggered by any exception thrown while
loading the symbol.
Fixes lp:1733111
https://bugs.launchpad.net/kicad/+bug/1733111
Remove the placeholders for the upcoming s-expression schematic and
symbol library file format plugin type. The lack of a valid plugin
implementation was causing an undefined plugin type string in the
plugin type selection cell when new rows were added to the table.
Fixes lp:1733116
https://bugs.launchpad.net/kicad/+bug/1733116
SEARCH_STACK is a deprecated method for getting the list of paths where
one could look for a file. Instead it tries the project path and
environmental variables.
All of the schematic object load and save code is implemented in the
legacy schematic plugin so it is no longer required.
Remove unused file with old schematic file loader.
Doxygen comment cleaning.
Use the legacy plugin schematic loader in the sheet edit and append
schematic code paths.
Check for fully qualified LIB_ID objects (must have library nickname)
when loading existing schematics when edit sheets.
Rewrite append schematic feature to handle import issues rather than
change the name and file name of all of the sheets in the imported
schematic. This includes the following:
- Load the schematic into a temporary SCH_SHEET object.
- Make sure the imported schematic does not cause any hierarchy
recursion issues.
- Verify the imported schematic uses fully qualified #LIB_ID objects
(symbol library table).
- Check to see if any symbol libraries need to be added to the current
project's symbol library table. This includes:
- Check if the symbol library already exists in the project or global
symbol library table.
- Convert symbol library URLS that use the ${KIPRJMOD} environment
variable to absolute paths. ${KIPRJMOD} will not be the same for
this project.
- Check for duplicate symbol library nicknames and change the new symbol
library nickname to prevent library name clashes.
- Update all schematic symbol LIB_ID object library nicknames when the
library nickname was changed to prevent clashes.
- Check for duplicate sheet names which is illegal and automatically
rename any duplicate sheets in the imported schematic.
- Clear all of the annotation in the imported schematic to prevent
clashes.
- Append the objects from the temporary sheet to the current page.
- Replace any duplicate time stamps.
- Refresh the symbol library links.
Add support code to SCH_SCREEN object to assist with schematic import.
Doxygen comment cleaning.
Fixes lp:1731760
https://bugs.launchpad.net/kicad/+bug/1731760
Do not attempt to normalize environment variables that are not valid
paths, paths that do not exist, or paths that the user does not have
read access to.
Fixes lp:1731655
https://bugs.launchpad.net/kicad/+bug/1731655
Dotted, dashed and dash-dot lines are provided in
HPGL, PDF, PS and SVG plot outputs along with line
width and color formatting.
DXF format does not currently provide any dashed
line functionality
A bug in HPGL plotted is corrected. Previous HPGL
dashed line commands were incorrect, plotting all
lines as solid.
The GTK+ file dialog is case sensitive however it does support regular
expressions. Most of the file dialog wildcards are lower case so only
files with the lower case extensions will show up in the file dialog.
This code adds a method to convert file extensions of any case to the
appropriate (sch -> [sS][cC][hH]) regular expression on GTK+ builds so
all file extension case combinations will show up in the file dialog.
A note to developers: make sure to add a file extension when setting
when setting the default file argument. If you do don't set an
extension, the GTK+ file dialog will happily append the regular
expression as the file extension which is surely not what you want.
There are still a few known places (mostly gerbview) where there are
some complex wildcard code that has not been converted.
Fixes lp:1720542
https://bugs.launchpad.net/kicad/+bug/1720542
The replaced wxASSERTs notify the developer that a variable is a
null pointer, but continue code execution and lead to a crash.
Instead, they are changed to wxCHECKs, that give the same type
of notification, but return from a function before the crash
happens.
A copy and paste error was causing to footprint library table file name
and path to be shown in the symbol library table edit dialog. Factor
out code in PROJECT::FootprintLibTblName() to PROJECT::libTableName()
to handle both symbol and footprint library table names and create a
new PROJECT::SymbolLibTableName() method to fix the path and file name
in the symbol library table edit dialog.
In the rare case when something goes wrong with the symbol library
table remapping, do not attempt to rescue symbols that are neither
in the cache nor in any of the libraries.
The legacy rescue library code overwrote the existing library so
previous rescues would get lost. If the rescue library exists,
copy it's contents into the new rescue library before adding the
new rescued symbols so no previously rescued symbols are lost.
Fix a null pointer bug in the symbol library editor when no symbol
is loaded.
Set LIB_ID item name to name passed to LIB_PART ctor.
Copy LIB_ID in LIB_PART copy ctor.
If a library disappears all together or a symbol name is changed, force
the rescuer to add it to the rescue library. The current rescue code
only looked for differences if they existed between libraries. This was
causing symbols to be unceremoniously dumped from the symbol library
table remapping.
Don't search for cache rescue candidates in the symbol library table
rescuer.
The old symbol library list save/load code does not get called in the
schematic project file configuration code. Use the LibNamesAndPaths
static function from the PART_LIBS object.
Bump schematic file version from 3 to 4 which represents the switch to
the library table symbol linking which is incompatible with all previous
versions.
Refresh the schematic after running remapping dialog manually.
Add missing CMP_TREE_NODE_LIB_ID type that was inadvertently deleted by
the symbol library table implementation that broke the preselected symbol
tree expansion and highlighting.
Changed CMP_TREE_NODE_LIB_ID type from ALIAS to LIBID for more accurate
description.
Use LIB_ID in COMPONENT_SELECTION object instead of strings of the
library and symbol names.
Move FindAlias() inside a try/catch block as is can throw an exception.
Don't abort adding symbols to library when a symbol cannot be found in
the symbol library table or the cache library. Instead, queue up error
messages and display them after attempting to add all of the symbols.
Always save the library file even if some of the symbols could not be
archived.
Catch IO_ERRORs in SCH_COMPONENT resolve to prevent unhandled exceptions
further up the stack.
Remove all symbol libraries from the project file after remapping to
prevent symbols that should be loaded from the cache being loaded from
a library further up the search order. Save the project file to clear
all of the libraries so they never get reloaded again.
Remove the symbol library management dialog and menu entries.
Rename the symbol library table dialog menu entry.
Remove all symbol libraries from default project file to prevent clashes
with the cache library.
Fix illegal symbol naming in Eagle plugin.
Refactor rescue objects so that they can support derivation.
Factor out legacy rescuer code to perform legacy project rescues.
Create new symbol library table rescuer for rescuing symbol library table
based projects.
Perform the correct rescue type on project load.
Add symbol library table remapping support to the tools menu for run on
demand as applicable.
Add flag to SCH_SCREENS::UpdateSymbolLinks() to allow forcing the symbol
link updates when the library modification hash has not changed.
Simplify some of the library editing code. There have been a few minor
changes in the behavior of the editor. If the current symbol is deleted
from the library, the next symbol in the library is not loaded. The
deleted symbol is cleared and the current symbol is empty.
Change component to symbol to align with the preferred terminology
discussed on the developer's mailing list.
Add separate update UI event for save library as to enable the menu entry
whenever a library is selected.
Change the select symbol list dialog to a single column using the LIB_ID
format LIB_NICKNAME:LIB_ITEM_NAME so that the selection can be parsed by
LIB_ID.
Add method to expand URI to LIB_TABLE_BASE.
Override wxApp::OnExceptionInMainLoop() in debug builds to make debugging
easier when an unhandled exception occurs in a wxUpdateUIEvent handler.
Change SCH_SCREENS::HasNoFullyDefinedLibIds() to return false when the
schematic has no symbols to prevent the remapping dialog from being run.
Use SCH_COMPONENT part reference when creating netlist rather than looking
up the library symbol.
Change all of the component tree helper objects to use LIB_IDs instead of
LIB_ALIAS pointers. LIB_ALIAS pointers are dangerous to use because they
can be deleted in the symbol library editor while the component chooser
dialog has copies of them. With LIB_IDs, the LIB_ALIAS pointer is found
on demand and can be guaranteed to be valid.
Update the chooser dialog to load the symbol library table instead of the
libraries defined in the project file and return a LIB_ID instead of a
LIB_ALIAS pointer.
Modify SCH_BASE_FRAME::SelectComponentFromLibrary() to handle the LIB_IDs
returned from the component chooser dialog.
Use GetPath() instead of GetFullPath() when initializing environment
variable table entries KICAD_SYMBOL_DIR and KICAD_PTEMPALTE due to
unexpected trailing path separator which was causing find libraries
by URI to fail.
Don't create a project symbol library table when there are no libraries
not found in the global symbol library table.
Don't add non-existent libraries to project symbol library table.
Clear symbol library table when loading a new schematic.
Minor remapping status message improvements.
Remove all instances of PART_LIBS and replace them with SYMBOL_LIB_TABLE
except for the CMP_TREE_MODEL_ADAPTER which requires updating as well.
Return the selected symbol using the LIB_NICKNAME:SYMBOL_NAME format when
viewer is launched as modal.
Add code to SYMBOL_LIB_TABLE object to allow enumerating symbol library
power symbols only.
Add a non-const version of LIB_TABLE::findRow().
Remove redundant information from Doxygen comments.
Check the if the schematic being loaded has been remapped (no symbol
library table nicknames defined) and remap accordingly.
Fix issues when resolving the library symbol links in the schematic
symbols.
Add cache library fallback when resolving symbols that cannot be
remapped.
Add remap complete message to remap dialog.
Add HasLibrary() helper to LIB_TABLE_BASE.
Fix issues when loading library symbols using symbol library table.
Add hashing function to symbol library table.
Improve the symbol panel message to warn user when cache library is
used to resolve symbol.
In LIB_EDIT_FRAME::GetComponentFrom{Undo,Redo}List() methods, the
PICKED_ITEMS_LIST object which was retrieved from undo/redo list has not
been destroyed.
Rewritten SCH_SCREEN::ClearUndoORRedoList() to be easier to read.
Minor whitespace formatting.
KiCad library symbol text objects cannot contain carriage returns and/or
line feeds which isn't the case with Eagle symbol libraries. Otherwise,
the library file will be corrupt when it is saved. Fixing this in the
legacy plugin would break the current file format so just replace them
with underscores. Ideally these text objects should be broken into
multiple text objects but the current plugin design doesn't support
this.
Remove adding the power symbol library when no libraries are specified
in the project file to prevent unexpected missing library dialog.
Only show progress dialog if there are actually libraries to load.
Do not call wxWindow::Destroy(). The dialog is created on the stack and
will be destroyed properly in the wxWindow dtor.
Fixes lp:1728648
https://bugs.launchpad.net/kicad/+bug/1728648
- set a proper title for the dialog
- changed the library parser delimiters to all whitespaces
- sorts the model list in the alphabetical order
- one tab to select subcircuit and semiconductor models
- model type is automatically selected
This instead of using the library alias property. But to not break any
library. When adding new components to the schematic, copy the value
from the library into the Field variable only if the field variable would
otherwise be empty.
This way, the context menu for showing the docs is more understandable
for users, and is also changeable from the schematic without having to
modify the actual libraries.
Fixed: lp:1723104
- Also makes the project and file import functions filetype dependent.
- The change from IO_MGR::KICAD to IO_MGR::KICAD_SEXP removes a conflict from a compile definition for KICAD when compiling kicad/import_project.cpp
- !! Eeschema uses Eagle plugin for loading schematics (i.e. it does not
use KiCad format anymore)
- Fixed build errors
- Fixed a few crashes
- Code formatting
(On windows, xsltproc.exe does not accept '\' in output filename, only '/' like on Unix, so this separator is converted when possible)
Minor code cleanup
This fixes potential DRC false positive bugs that occur when inner layers
are removed from the board but the actual objects on contained on those
layers remain in the board.
Since Pcbnew does not handle odd number layers, this is not a perfect fix.
When the user chooses the front or back layer only options from the layer
setup dialog, objects on the copper layers will not be removed. This will
not cause the false positive issue described above.
Get rid of dialog OK and cancel button event handlers and use the proper
TranferData(To/From)Window for handling control data.
Add PCB_LAYER_COLLECTOR for collecting board objects by layer. Factor out
redundant [] operators into base PCB_COLLECTOR object.
Fixes lp:893950
https://bugs.launchpad.net/kicad/+bug/893950
Don't prompt the user to save the project file after the schematic plot
settings change. It is not done this way anywhere else in KiCad.
Fixes lp:1478131
https://bugs.launchpad.net/kicad/+bug/1478131
Add EDA_DRAW_FRAME::isBusy() method to test if the current item is being
edited or a block operation is in progress.
Ignore undo and redo commands when editor is busy.
Fixes lp:1718656
https://bugs.launchpad.net/kicad/+bug/1718656
Make all trace environment variable strings upper case and prefix with
KICAD_TRACE_ for consistency.
Add Doxygen group for the trace environment variable strings.
Derive the dialog from DIALOG_SHIM and show dialog quasi-modally to prevent
other KiCad main frame window events from being blocked.
Remove redundant storing of parent window pointer.
Verify parent window pointer is actually a SCH_EDIT_FRAME since the dialog
directly accesses parent object methods.
Replace static event table with dynamic event handling.
Fixes lp:1718241
https://bugs.launchpad.net/kicad/+bug/1718241
This fixes a build error on MSVC. The code may actually be legal, but a
proof of that would require a lengthy dissertation on argument promotion
rules for the ternary operator, and the simplest rule of promoting both
cases to a wxString rvalue is not likely to be what is intended here.
Fortunately, this expression can be simplified.
- pad names are stored as wxString instead of a char[4] & integer union
- removed pad name to string conversion functions
- fixed pad & pin properties dialog restrictions regarding the name
length
Test the result of wxFileName::MakeRelativeTo() before testing to see if
the resulting relative path starts with '.'. When a library with relative
path that contains a path name with $ as the first character,
MakeRelativeTo() calls Normalize() which attempts to do an environment
variable substitution that concatenates consecutive paths i.e. the path
/foo/$bar ends up being foo$bar which is obviously incorrect. This fix
is only a fix for absolute paths and files that contain path names that
begin with $. This still does not resolve the issue when adding a
library file relative to one of the search paths that contains a path
name that begins with a $. Fixing this would potentially break paths
that are expecting environment variable substitution.
Fixes lp:1712361
https://bugs.launchpad.net/kicad/+bug/1712361
Use sheet pin direction to calculate sheet minimum height and width.
Remove sheet pin offsetting as the new sheet height and width calculation
prevents invalid minimums.
Calculate the proper minimum height when resizing sheets to prevent resized
sheet height from always increasing.
Prevent the sheet pins from being drawn in the corners of the sheet when
updating the edge constraints on resize. This ensures that the sheet pin
is always drawn within the bounds of the sheet. Please note that this fix
may not be 100% accurate as is assumes the default grid size of 50 mils.
This may not be what the user expected but it guarantees that wires will
connect to the pin properly.
Fixes lp:1699796
https://bugs.launchpad.net/kicad/+bug/1699796
This was the behavior before the factoring out of COMPONENT_TREE. Moving
the history at the top just required inserting it at the right point;
fixing preselect involved wxEVT_INIT_DIALOG not propagating to the
panel. Simple solution was to move the parts of that event handler to
the constructor as they didn't have to be in an event handler anyway.
Fixes: lp:1707538
* https://bugs.launchpad.net/kicad/+bug/1707538
Instead of keeping all items in a boost::ptr_vector(), LIB_ITEMs are now
stored in an integer (KICAD_T) to LIB_ITEMS map.
The map allows to quickly access a subset of items of given type.
As the items are stored per type, there is no need to call
LIB_ITEMS::sort() to assure the correct drawing order. As a result,
libraries load faster.
To retain the old interface, there is a LIB_ITEMS_LIST wrapper for
the map, allowing the developers to access the items as if it was a flat
list-like structure.
Create a new dialog to edit global and project specific symbol library
tables.
Add menu entries for new symbol library table editor in schematic editor
and symbol library editor main frame menus.
Add command event handler for symbol library table editor dialog to
SCH_BASE_FRAME so it is accessible from derived frames.
Fix bug in default environment variables initialization. A test for
existing user defined environment variables was preventing any new
default environment variables added to the list from being initialized.
Create a dialog to give the user options to configure the global symbol
library table the first time Eeschema is run when no global symbol library
table exists.
Add information when dummy symbol is used for library symbols that could
not be found to give the user some useful information to help track down
the broken link rather than display an empty message panel.
This forces the compiler class specific features rather than borrowing
from the base class's std::string. In some cases prior to this,
wxString( std::string ) was being called rather than UTF8::operator
wxString() leading to garbled wxStrings.
Added function UTF8::wx_str() which is of great convenience also.
Implicit conversions still work as before, and hopefully more reliably.
This commit was too broad and not cognizant of the purpose of the class
UTF8.
Add MAYBE_VERIFY_UTF8() macro, which can trap non-UTF8 encoded strings in
debug builds.
Use that macro conditionally in class UTF8 to trap non-UTF8 encoded strings
being put into UTF8 instances.
Due to library list repopulation on refresh, the unit was being
overwritten with 1. Now, we track whether the unit needs to be
overwritten.
Fixes: lp:1677736
* https://bugs.launchpad.net/kicad/+bug/1677736
The illegal white space testing for reference and value (library editor
only) fields are adequate to ensure the user cannot enter invalid white
space characters. Leading and/or trailing white space should not be an
issue for field storage in the schematic file as they are quoted. Rather
than silently removing the leading and/or trailing white space which is
frowned upon, let the user fix it.
Fixes lp:1659526
https://bugs.launchpad.net/kicad/+bug/1659526
Fix potential memory leak in both footprint and symbol library table
parsers when a duplicate library nickname entry exists.
Parse entire symbol library table before raising duplicate nickname
exception.
Improve the duplicate library table nickname error message to make
life easier for users to fix broken tables.
This is more a workaround than a fix.
The crash was due to the fact the library cache is modified on the disk with the saving process.
Fixes: lp:1702707
https://bugs.launchpad.net/kicad/+bug/1702707
The previous fix was building the full name incorrectly, when this name contains a path not relative to the project.
Fixes: lp:1700331
https://bugs.launchpad.net/kicad/+bug/1700331
Initializing wxFileName objects by using string assignment or the single
string argument ctor will cause wxFileName to parse everything to the
right of the first dot as the file extension. Therefore, file names such
as foo.1.lib and bar.baz.lib will fail. This is probably not the only
place in the KiCad source where this can occur.
Fixes lp:1700331
https://bugs.launchpad.net/kicad/+bug/1700331
Add Resolve() and ResolveAll() methods the SCH_COMPONENT object to use the
symbol library table to obtain links to the library symbols.
Add LoadAlias() method to SYMBOL_LIB_TABLE to find an alias by it's LIB_ID.
Clean up Doxygen comments to match coding policy changes.
The zoom window toolbar button is on the right toolbar separated from the
other zoom buttons on the top toolbar. Move the zoom window button to the
top toolbar beside the other zoom buttons.
Before the refactor library browser display Bezier curves correctly only
once, at other times they were just straight lines or crashed the
application.
The symbol library header was setting the text thickness using the
last line thickness setting which is incorrect so use the default
thickness when creating new text objects.
Fixes lp:1635344
https://bugs.launchpad.net/kicad/+bug/1635344
- Removed ability to generate BOM to file
- Removed Save/Cancel window when closing table
- No longer updates table <after> table is closed
- Bugfix for field names (previously comparison was case insensitive)
- Allows grouping of matched components
- Bulk edit of components in a spreadsheet window
- User can choose to save / undo changes
- All changes are pushed to the undo stack in a single operation
- Export table to HTML / CSV output
Sadly, each unit of a component can have its own unique fields. This
change finds the last non blank field and records it. Last guy wins
and the order of units occuring in a schematic hierarchy is variable.
Therefore user is best off setting fields into only one unit. But this
scavenger algorithm will find any non blank fields in all units and use
the last non-blank field for each unique field name.
Fixes lp:1471417
https://bugs.launchpad.net/kicad/+bug/1471417
This reverts commit 0a8a659ff7.
The patch is incorrect, as it removes the FP chooser drop-down list.
I cannot reproduce the crash with the patch reverted, so there must
have been something specific to my configuration at that time.
Create dialog and code to allow legacy schematic symbols to be remapped
from the old library path look up method to the new symbol library table
method by using the following steps:
1) Create a project symbol library table containing all of the symbol
libraries defined in the old library look up list not found in the
global symbol library table.
2) Map each symbol to the correct symbol in the symbol library table
if possible.
Recreate library link to symbols so look up method can be converted to
symbol library table properly.
Add function to SCH_COMPONENT to link library symbols using the symbol
library table.
Add loading symbol library table code to schematic PROJECT object.
Fix minor issues with loading global symbol library table.
Add default symbol library path environment variable to the environment
variable list and change the variable name to KICAD_SYMBOL_DIR.
Add code to SCH_SCREENS to test if all library nicknames of the symbol
library IDs are empty.
Remove unnecessary KICAD_USE_SCH_IO_MANAGER build option.
Fix if statement logic to ensure the unit number is never set to zero.
Add logic to the legacy schematic plugin to automatically convert any
schematic files that have components with a unit setting of zero. Set
the schematic modified flag so that the user will be notified of a
changed schematic.
Add a user warning when the schematic parser fixes the bug and sets
the file modified flag.
Fixes lp:1677282
https://bugs.launchpad.net/kicad/+bug/1677282
This bug was actually here before the new component chooser this time;
I'm not sure what the purpose of this error message was since it is
being displayed in a non-error state. Maybe a copy/paste bug from when
Delete Component was changed to use the main component chooser?
- In the listing, display alias names in italics
- In the info panel, display per-alias description correctly, as well as
root description
Fixes: lp:1676190
* https://bugs.launchpad.net/kicad/+bug/1676190
- DIALOG_CHOOSE_COMPONENT has footprint select widget
- FOOTPRINT_SELECT_WIDGET
- FOOTPRINT_CHOICE widget (customized wxComboCtrl)
- FOOTPRINT_FILTER class
- FOOTPRINT_INFO rework:
- FOOTPRINT_ASYNC_LOADER to load without freezing UI
- Rewrite loader threads as queue-driven thread pool
- Make FOOTPRINT_INFO available via kiway
- FP_LIB_TABLE::PrefetchLib
- Access to global fp-lib-table via kiway
- SYNC_QUEUE threadsafe queue template
- Remove KICAD_FOOTPRINT_SELECTOR build option
The executable name constants are only used by two files, they do not
have to be in common.h.
Also converted to const wxString for better type-safety and removed
old-style wxT macros.
- Pull out compound widget bits into FOOTPRINT_PREVIEW_WIDGET
- Move all pcbnew-specific bits *inside* pcbnew; implementation should
be private for users
- Make a few class members and inner types private
The save current symbol command had a different code path then save current
library so the schematic symbol was not being refresh after is was modified
in symbol editor.
Split out the save current symbol command from Process_Special_Functions()
to help reduce function growth hormone imbalance syndrome.
Some coding policy fixes and wxT() macro removal.
Fixes lp:1671456
https://bugs.launchpad.net/kicad/+bug/1671456
- Stop wx from sorting the items. We've already sorted them, and
profiling shows our sort is faster than theirs.
- Go back to using strings as cache keys, because using pointers means
the cache doesn't survive from one invocation to the next. Switch to
wxHashMap because it can use wxString keys in an unordered (faster)
map.
This refactors COMPONENT_TREE_SEARCH_CONTAINER into a Model-View-Adapter
architecture comprising:
- eeschema/cmp_tree_model.h
- CMP_TREE_NODE: Base class representing a searchable library
set with scoring and sorting
- CMP_TREE_NODE_UNIT
- CMP_TREE_NODE_ALIAS
- CMP_TREE_NODE_LIB
- CMP_TREE_NODE_ROOT
- eeschema/cmp_tree_model_adapter.h
- CMP_TREE_MODEL_ADAPTER: mediator between wxDataViewCtrl (via
wxDataViewModel) and CMP_TREE_NODE*
+---+ +------------------+
+---+ Generates | A | | VIEW |
| M | from libs | D | wxDataViewModel |------------------|
| O | <---------- | A | <------------------> | wxDataViewCtrl |
| D | | P | |------------------|
| E | <---------> | T | <------------------- | wxTextCtrl |
| L | UpdateScore | E | UpdateSearchString() |------------------|
+---+ | R | | |
+---+ +------------------+
Representing the data with a proper model allows the wxDataViewCtrl to
be updated in bulk, which is significantly faster than the old method of
populating it one item at a time. This also adds flexibility if more
data is to be added in the future (which may come in handy with the
upcoming .sweet format, as that adds more ways components can be related
to each other).
Replacing the wxTreeListCtrl with a wxDataViewCtrl also significantly
reduces the general GUI quirkiness, as wxDataViewCtrl is much more well
behaved.
Only the root sheet symbol library links were being updated when the
schematic was loaded so changed call to update all sheets.
Fixes lp:1670079
https://bugs.launchpad.net/kicad/+bug/1670079
For some reason, the schematic symbol library link was being regenerated
every time the schematic was redrawn in SCH_SCREEN::Draw(). Remove the
re-link call from the Draw() and Plot() functions.
Add function the SCH_SCREENS to update the links in all of the schematic
sheets.
Update all schematic sheet symbol library links whenever the symbol
library list is modified or any library in the library list is modified.
That should cover all cases where the symbol library links could be
broken.
Refresh schematic window after applying library changes to update any
possible symbol changes.
Add KIWAY message to update the schematic when symbol library changes
could change the schematic. The KIWAY mail was used because the schematic
frame is not a parent of the symbol library editor so wxEvents cannot be
used.
For some reason, rather than using the LIB_PART object reference by an
SCH_COMPONENT to check if a pin was at a given position in the schematic,
a LIB_PART search was performed for every component in a schematic. This
made absolutely no sense and was changed to use the LIB_PART referenced
by the SCH_COMPONENT object. This should significantly speed up any
operations that call SCH_SCREEN functions, IsTerminalPoint(),
MarkConnections(), and IsJunctionNeeded().
Add function to SCH_COMPONENT to access PART_REF object.
Adds a similar crossprobe as modules has in pcbnew. When clicking a
sheet in eeschema, the items that are exclusive in that scheet will be
selected in pcbnew if using the GAL canvas.
Allows to map nodes to pins for Spice models that have more pins than
corresponding schematic symbol. An example is a MOSFET model containing
gate, source, drain & body, whereas schematic symbol part has only gate,
source & drain with body and source connected inside the part.
PROPERTIES object has been recreated every time it was needed, using
two fields in PART_LIB class. Now the buffering & caching settings are
stored directly in a PROPERTIES object.
(now "F1" is forced to name given by "DEF", like in stable version)
Fix also an incorrect parsing of .dcm file, if a component was not found in corresponding symbol lib.
(Can happen for not updated .dcm files)
The changes were made to rearrange the positions of the first 5
icons in the part editor so that they are consistent with footprint
editor.
Signed-off-by: Joseph Y. Chen <joseph.chen59@yahoo.com>
eeschema now supports arbitrary colors for all object types, and
pcbnew does in GAL canvas. When switching from GAL to legacy canvas,
pcbnew will convert colors to the nearest legacy color.
bitmaps.h was included in nearly every file in the project due to it
being included by base_struct.h
Only about 130 files actually use the XPM definitions defined there, and
many of those already included bitmaps.h themselves, or via
menu_helpers.h. However, touching bitmaps.h would result in over 400
rebuilt files for pcbnew alone.
This commit moves the bitmap-related types like BITMAT_DEF out to a new
header, which is still included by base_struct.h, which is less
avoidable for now, it's it's used in the interface.
The icon list is still in bitmaps.h. This has the side effect that's
it's now easier to automatically generate this file.
Many classes in pcbnew and eeschema needed some functions moved
to the implementaitons from the headers too.
This commit brings several changes:
- Add a footprint preview pane to the eeschema component selector
- Upgrade component list to wxTreeListCtrl
- Factor out wxTreeListCtrl subclass TWO_COLUMN_TREE_LIST which
patches a column size bug
- Linkify datasheet URL in info pane
When Eeschema is relaunched from KiCad, the symbol libraries were always
reloaded which isn't necessary as they are maintained by the kiface project
object until the project is changed.
Fix minor title capitalization in symbol library progress dialog.
A conversion from wxString using FROM_UTF8() was inadvertently used when
loading and enumerating symbols from the legacy plugin. This conversion
would break any non-ascii characters in the symbol name.
Fixes lp:1664642
https://bugs.launchpad.net/kicad/+bug/1664642
Check to see if the root symbol alias already exists before adding it to
the symbol library alias list in the legacy schematic I/O plugin. There
currently about six different ways that the root alias can be changed in
the root symbol which causes issues. This really needs to be cleaned up.
Use buffering when updating a symbol in a library to prevent the library
file from being written before it is backed up.
Update the alias and unit selection menubar drop down lists.
Delete the output formatter so the file is closed so that reading the
file time stamp can be performed to prevent unnecessary cache reloads.
Fixes lp:1664834
https://bugs.launchpad.net/kicad/+bug/1664834
Apparently symbol definition blocks can have a '0' character in the lock
position which is typically defined as 'L' or 'F'. This must have been
a oversight at some point since both versions of the DEF parameters
exist in library version 2.3 files.
Disable the symbol library cache buffering after saving.
Check for existence of cache library when before attempting to rebuild
the cache. Create a new cache library object if no cache library was
loaded.
Add missing buffering and cache properties to LIB_PART::FindAlias() to
prevent the plugin from reloading the cache library that may not exist.
Add method to find library by full path and file name.
Revert the check for a symbol in the cache library remove from last
patch.
Add checks for plugin cache file name validity and existence of a the
file before attempting to verify the file modification time to prevent
wxWidgets from raising an assertion in debug builds.
Clear modified flag when saving buffered and/or cached library.
Add the ability to save empty symbol library file for caching and empty
schematic.
Remove check for existing symbol in cache populating routine. Just perform
a complete rebuild of the cache library and overwrite the existing one.
Fixes lp:1663871
https://bugs.launchpad.net/kicad/+bug/1663871
Move adding LIB_PART to library until the part is fully parse. The problem
was unique_ptr was cleaning up the part when an exception was thrown during
parsing causing a double free when the cache was deleted.
Add missing try/catch block when loading the cache library during an append
schematic operation.
Fixes lp:1663869
https://bugs.launchpad.net/kicad/+bug/1663869
LIB_ID was changing the symbol name due to the parser dropping everything
past the first '/' character which is interpreted by LIB_ID as the item
version. Add flag to ignore this in LIB_ID::SetLibItemName() and add a
new ctor so the library nickname, item name, and revision can be set as
required to prevent the standard LIB_ID parsing.
Fix a few places where PART_LIBS functions FindLibraryAlias() and
FindLibPar() were translating wxString symbol names to LIB_IDs where the
LIB_ID parser was truncating the symbol name.
Use LIB_ID instead of wxString for storing the library symbol information
in the schematic symbol in preparation for the upcoming symbol library table
implementation.
Change the FindLibAlias and FindLibPart functions in the PART_LIBS object
instead of wxString. Please note that only the library ID name is used to
search the list of libraries. The library nickname is ignored. Once the
symbol library table is implemented and full LIB_IDs are defined, the
library search code will no longer be used and will only be kept to load
older schematics that have not been converted.
Move SCH_LEGACY_PLUGIN_CACHE definition so that the legacy plugin knows
how to properly delete the cache object.
The LIB_PART object stores a pointer to the PART_LIB that it belongs to.
Now that the PART_LIB is no long responsible for loading the library, add
the PART_LIB pointer after the library is loaded by the plugin.
Don't call init() when performing library functions as it was always
setting the m_cache variable to null which cause the library to be
reloaded every time a library command was performed as well as a
memory leak.
Delete cache object when the plugin is destroyed.
Add SCH_PLUGIN object to PART_LIB object.
Convert all PART_LIB I/O to use SCH_PLUGIN.
Remove library caching from PART_LIB and use caching provided by SCH_PLUGIN.
Add support to use PROPERTIES for buffering and document file write control
instead of adding code the SCH_PLUGIN object in the SCH_LEGACY_PLUGIN that
will not be required when the new file formats are implemented.
Add buffering to SCH_LEGACY_PLUGIN to prevent cache from writing file on
every change to library. This is to prevent the cache library from being
written every time a new symbol is added.
Add option to not save library document file when saving library. This is
primarily used by the cache library write code.
Move symbol library write code out of LIB_PART and into SCH_LEGACY_PLUGIN.
Add exception handling where LIB_PART caught the exception and returned
an error status.
Remove KICAD_SCH_IO_MANAGER build option as it is no longer optional.
- Reused SelectComponent dialog
- Reduced selection to current library only
- Ability to filter component for deletion
- Automatically pre-select the current component
jean-pierre charras
Jeff Young
Martin Sivak
Tomasz Włostowski
ludovic léau-mercier
Maciej Suminski
Seth Hillbrand
Wayne Stambaugh
Jon Evans
Dan Weatherill
Oliver
Chris Pavlina
Camille
Dan Weatherill
Mark Roszko
Nick ?stergaard
Simon Richter
Christian Jacobsen
Andrew Wygle
Henner Zeller
Bernhard Stegmaier
Julius Schmidt
Baranovskiy Konstantin
Marvin Schmidt
Kristoffer Ödmark
Russell Oliver
Alejandro García Montoro
Ingo Kletti
Fabrizio Tappero
Jean-Samuel Reynaud
Seth Hillbrand
Dick Hollenbeck
danngreen
Cheng Sheng
Andrey Fedorushkov
John Beard
Martin Stoilov
Joseph Y. Chen