3f9ea8250a
Defined snprintf to sniprintf on launchpad-icdi
2015-10-22 19:33:45 +03:00
2365bbe010
TI TM4C/LM4F cdc-acm fixes
2015-09-30 15:48:01 +03:00
b60f5283ae
Fix usage of USB_VBUS
...
USB_VBUS is not an alternate function, it is an additionnal function which is
always enabled.
If configured as an alternate function, it will draw current from VBUS.
2015-06-23 11:51:56 +02:00
0fc635b3f8
Add functions for dynamically generating the XML memory map.
2015-04-03 21:18:16 -07:00
482070c91b
Merge branch 'v1.6-branch'
...
Conflicts:
src/Makefile
src/platforms/stlink/platform.h
src/platforms/swlink/platform.h
2015-04-03 21:02:01 -07:00
97824b7f02
Use git describe for version in generated header file.
2015-04-03 20:21:33 -07:00
68f54a3545
Remove old platform specific error handling macros.
2015-03-22 14:06:56 -07:00
5ab8564ff6
Clean up handling of lost targets using new exceptions mechanism.
2015-03-22 14:05:12 -07:00
588bad34ba
Build with -Os for swlink.
2015-03-22 12:26:45 -07:00
9a8dbdeff7
Fix errors when building for non-native platforms.
2015-03-22 12:26:45 -07:00
fa046601a5
Add exception handling mechanism and raise exception on low-level comms failure.
2015-03-22 12:26:45 -07:00
f5f87bf70f
Build for stlink with -Os.
2015-03-15 20:39:19 -07:00
6f5b1873d7
Use size_t for sizes in flash functions. Fix all sign compare warnings.
2015-03-14 15:18:22 -07:00
f5c856af3b
Fix pointer sign warnings and remove -Wno-pointer-sign.
2015-03-13 20:35:39 -07:00
3d28c1418c
Cleaned up printf/scanf for C99 integer types.
2015-03-11 20:47:42 -07:00
4baa8aba4f
cdcacm: Fix DCD for second ACM interface.
2015-03-11 20:13:38 -07:00
7c1c19881f
Reassert DCD after DTR is written. Fixes #41 .
2015-03-11 05:45:43 -07:00
0d99e22a26
Quieten build system.
2015-03-07 11:03:50 -08:00
1eac78b1c8
Move targets to make bin and hex files to toplevel makefile.
2015-03-07 11:03:50 -08:00
49390fee2a
Fix Windows DFU instructions in the Hydrabus readme.
2015-03-04 20:22:19 -08:00
9f0c29d329
Add support for HydraBus (tested with SWD with STM32F405 and SWD+JTAG with LPC4330 M0/M4)
2015-03-04 20:22:00 -08:00
c731c6ece3
Make F4 conditionals check STM32F4, not F4DISCOVERY.
2015-03-03 21:39:29 -08:00
3e466f2d23
Factor out timing routines common to all STM32 targets.
2015-03-02 21:59:04 -08:00
b07ffffcee
Factor out common cdcacm.c from stm32 and tm4c.
...
Cleaned up interface to enter bootloader and read serial number.
2015-03-02 10:16:33 -08:00
4d4813de87
Clean up includes everywhere.
...
All source files include general.h first and before anything else.
This inlcludes platform.h and platform_support.h
No header file needs to include to include any of these, but should include
any others needed for it's own declarations.
2015-03-01 22:16:04 -08:00
9d80641261
Move common platform include to a common directory.
2015-03-01 20:15:31 -08:00
476f83b69a
Move common USB stuff out of platform header files.
2015-02-28 22:48:26 -08:00
5eff0ab5d6
Factor out common GPIO code in STM32 platforms.
2015-02-28 22:09:50 -08:00
75001a4421
Factor Morse code functions out of platform code.
2015-02-28 22:05:10 -08:00
5d136398e1
Use sensible return convention for platform_target_get_power()
2015-02-28 21:23:24 -08:00
346258934b
Added support for TI TM4C123 Launchpad
2014-11-23 22:59:16 +01:00
fd9eef821e
Revert USB double buffered OUT handling on STM32F1.
...
This introduced a bug where the endpoint can get stuck, forever sending NAK.
2014-10-16 13:50:56 -07:00
f85a8c4ebb
Fix build for f4discovery by defining platform_hwversion().
2014-10-16 13:50:56 -07:00
a5549d630c
Whitespace cleanup.
2014-10-16 13:50:56 -07:00
8a32b46f65
Fix build for non-native targets.
2014-08-08 20:22:33 +12:00
84fc40085e
Send a null packet on end of USB transfer if last data packet is full.
2014-08-06 12:38:57 +12:00
fad6eb3c14
Fix parity support on USB UART interface.
2014-07-30 19:57:18 +12:00
bfe5d1168b
Merge pull request #47 from richardeoin/target-power
...
Added monitor option to toggle target power
2014-07-30 14:19:46 +12:00
c1b1d45155
TRST only exists on hardware version 0
2014-05-28 12:45:21 +01:00
42e41edfa1
Target power option is only for versions > 0
2014-05-28 12:33:43 +01:00
c9089f5851
Added monitor option to toggle target power
2014-05-28 12:25:48 +01:00
63bce97cbd
PLATFORM_FATAL_ERRORs are now caught even when they happen in the
...
initial JTAG scan that occours during platform_init.
Previously any fatal errors that occoured during this scan caused a
hardfault.
2014-05-28 12:10:26 +01:00
72ae78a185
Updated libopencm3. Fixes broken bootloader, issue #43 .
2014-05-08 11:02:35 -07:00
12aeaad441
[locm3] Use the new clock-enabling mechanisms in locm3.
2014-02-13 18:21:16 +01:00
690e99c6b2
Fix the STK_CTRL to the STK_CSR library change.
2014-02-13 17:52:09 +01:00
0c9d5d8166
Add dfu bootloader update application and use absolute delay for stlink
...
Hello,
appended 3 patches
- adds a dfu-bootloader appliaction
- uses absolute delays when waiting for pull-up delays on the STLINK
(hopefully fixes issue #30 )
Updating the dfu-bootloader by additional application is helpfull for the
STLINK, as for flashing the bootloader by SWDb otherwise jumpers need to be
soldered or external SWD is not possible.
Use like:
- dfu-util -s 0x08002000:leave -D dfu_upgrade.bin
- dfu-util -s 0x08000000:leave -D blackmagic_dfu.bin
- Push reset buttom and reconnect to enter new dfu bootloader
- dfu-util -s 0x08002000:leave -D blackmagic.bin
--
Uwe Bonnes bon@elektron.ikp.physik.tu-darmstadt.de
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
>From fae5022c304a8866f056ea66660ac7ce3809dcf8 Mon Sep 17 00:00:00 2001
From: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Date: Sun, 20 Oct 2013 15:00:36 +0200
Subject: F1: Prepare to update dfu bootloader via DFU with additional
application.
2014-01-24 04:59:09 +08:00
8014d434de
Update to the newest libopencm3
2014-01-04 17:29:54 +01:00
8835df1822
Merge remote-tracking branch 'origin/usbuart_highrate'
2013-12-04 16:16:08 +13:00
09fbe783c5
f4discovery: Limit clock to 48 MHz and stack 24 kiByte so that code can be compiled unchanged for F401Discovery too.
...
TODO: Bump clk up to 84 MHz as soon as libopencm3 supports that speed.
2013-10-22 07:26:35 +08:00
5aa802969b
stlink: Give the NRST check more time as otherwise some L1 discovery board stayed in the bootloader.
2013-10-22 07:18:09 +08:00
c395c6f73a
Configure SRST output as open-drain for BMP Mini hardware
2013-10-05 13:14:03 +08:00
40820a2354
Added internal pull-up to PWR_BR.
...
o Prevent probe from inadvertently powering target. If PWR_BR is
allowed to float, the gate on Q1 (blackmagic_mini) will tend to be
close enough to zero to turn the transistor on. We activate the
internal pull-up on this IO pin to force the transistor off.
2013-10-05 13:14:03 +08:00
e67192348f
FIX: usbd_init compatibility fix
...
Updated compatibility with libopencm3 commit 113e5c22e6390ba072148315e83a5faa5ff7ce86
2013-10-05 12:23:23 +08:00
c28350f242
FIX: u{8,16,32} -> uint{8,16,32}_t to be compatible with new library
...
The use of u8, u16, u32 has been deprecated in libopencm3.
Update it with standard uint8_t, uint16_t, uint32_t types
2013-10-05 12:23:23 +08:00
700833f38f
Use do {...} while(0) for PLATFORM_FATAL_ERROR() macro.
2013-08-19 12:27:36 +12:00
27a86e244f
native: Enable hard SRST signal.
2013-06-19 19:21:49 +12:00
8c877d6dfa
Fix trailing whitespace everywhere.
2013-06-17 15:53:32 +12:00
cdaed128c1
stlink: add support for SRST handling
...
This enables SRST signals in open drain mode for both stlinkv1 and
stlinkv2 hardware platforms.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2013-05-14 12:34:53 +12:00
e0fc21a2a7
adiv5_swdp: allow to connect to a sleeping target by pulling SRST
...
This patch introduces a new command, "connect_srst [enable|disable]"
which allows to enable special mode in which SRST would be pulled low
before the SWD scan till attaching to a target.
Since on Cortex-Mx the SRST signal doesn't gate JTAG and SWD, it's
possible to connect to a target while holding reset, ask it to stop at
reset vector and only then deassert reset, thus allowing to attach to
the kind of firmware that goes immediately to sleep or disables
debugging by other means early on start.
Tested on an STM32VLDiscovery board with STM32F100 configured to go to
STOP mode and executing WFI in the very beginning of main().
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2013-05-14 12:32:44 +12:00
e3f3171a33
usbuart: Fix build error and clean up whitespace.
2013-04-27 13:14:22 -07:00
43f7e7a3cf
Changes to the USBUART to make it less likely to drop characters at higher baud rates.
...
USB UART seems to work fine at 115.2Kbps or 230.4Kbps, but starts to drop characters
as the data rate goes higher. This commit changes the usbuart ISR to fill a software
FIFO, and adds a low priority timer interrupt to run deferred processing to drain a
FIFO and send USB CDCACM packets, rather than calling the usb send within the UART
ISR.
Tested on native platform, up to 1.5MBps.
2013-04-27 12:56:58 -07:00
f1ea5ed8f9
F4Discovery: Slow Down GPIO access a little, as off-board SWD otherwise needs _very_ good ground connection.
2013-04-23 13:43:43 -07:00
ad151fdca8
F4 Discovery: - Unconditionally use the System Bootloader - Use PC2/4/5/6 Pins for JTAG/SWD to avoid collision with eventual STLink Uart connection - Indicate Bootloader with blue LED
2013-04-23 12:14:18 -07:00
6659d87e9b
Remove DFU bootloader self protection.
...
It can still be enabled by building with -DDFU_SELF_PROTECT
2013-04-16 16:54:52 -07:00
126df7bb35
Allow extra LDFLAGS on command line. Use nano.specs for swlink.
2013-04-16 16:47:38 -07:00
45e02360b7
native: Fix up deprecated warnings.
2013-04-16 12:47:29 -07:00
67a96410e3
libftdi: Clean up warnings.
2013-04-16 12:33:28 -07:00
da448ec1a6
libftdi: Add 'flossjtag' cable.
2013-04-16 12:14:37 -07:00
9c95f039cf
Make code compatible with newlib-nano and use it for stlink
...
With gcc-arm-none-eabi-4_7-2013q1-20130313 and -O2 I get
text data bss dec hex filename
45744 304 2376 48424 bd28 blackmagic
With -Os the results are even more impressive:
text data bss dec hex filename
37900 304 2376 40580 9e84 blackmagic
Since -Os might lower the debugging speed, do not enable it yet in the
absence of real measurements.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2013-04-14 11:48:59 -07:00
91b481731d
stm32f1/stm32f4: fix hardware CRC calculation
...
This was real-life tested on stm32f1 hardware including computation
for odd-sized ranges.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2013-04-14 11:35:23 -07:00
61d464bf09
dfu: Fix warnings.
2013-04-04 20:16:13 -07:00
d4411fc51f
Removed verison info from USB strings on native platform.
2013-03-31 12:18:11 -07:00
87dad080e1
Fix build for f4discovery host.
2013-03-17 10:17:05 +13:00
931cd97f15
Removed stm32_can and usps_f407 platforms.
2013-03-15 20:50:55 +13:00
486c5de013
swlink: Add missing item to connector layout
2013-03-14 22:56:31 +01:00
920ced062e
SWLINK: Add variant for the STM8S Discovery board
2013-03-12 12:24:10 +01:00
e880c553fb
Restore trace timer interrupt handler.
2013-03-12 19:14:11 +13:00
7c2e994381
Split out platform specific bootloader parts to separate files.
2013-03-12 19:04:10 +13:00
55f161208d
Further split-up of DFU bootloader.
2013-03-12 15:00:15 +13:00
14e5e8b0b6
Separated clean and dirty bootloader sections.
2013-03-12 09:57:28 +13:00
e8f9d52d2f
gdb_if: Fix USB flow control.
...
The introduction of the double buffering broke USB flow control, causing
loss of data when a new packet arrived with the previous still present in
the double buffer.
With this patch the endpoint is kept in NAK until the double buffer is empty.
2013-03-06 20:36:49 +01:00
ff8de39774
usbuart: Don't try to send until configured. Enumeration may hang else
2013-02-15 17:55:36 +01:00
dee82a0d4f
Document changes between ST-Link V1 and V2 and implement needed changes
2013-02-15 17:39:27 +01:00
f8ea954275
STLINK: Add pointer to Discoveryboard modification instructions
2013-02-11 19:36:22 +01:00
327ee49a67
usps_f407: add another platform
2013-02-03 14:22:14 +01:00
31f39339fd
stm32/usbdfu.c: Rearrange code to clarify the tasks to be done
2013-02-03 14:14:48 +01:00
96ae3886ff
stm32:cdcacm/usbdfu: Print version and build information in the product string
2013-01-25 13:01:57 +01:00
8415fc829b
stm32/cdcacm.c: remove unneeded includes
2013-01-23 17:28:34 +01:00
6157754201
libftdi: List some know cables and allow to specify cable and serial
2013-01-23 00:16:01 +01:00
ce059cc8ed
LIBFTDI: Propagate the command line arguments to platform_init
2013-01-23 00:15:47 +01:00
73d120577b
usbdfu: Write protect the bootloader sector on F4
2013-01-22 19:04:51 +01:00
747cc58c2c
STLINK: Unconditionally enable MCO from 8 MHz HSE to PA8 as on original firmware. F3 Discovery has has no quarz for the F3 and needs it.
2013-01-21 12:48:37 +01:00
8033fb2529
STLINK: Allow to force bootloader by starting with the RESET button pressed
2013-01-21 11:02:44 +01:00
749fb318e7
gdb_if: Use a doubled buffer scheme for reading data from USB
...
Needed, as the OTG driver erases the data read after eventually calling the callback
2013-01-21 11:02:44 +01:00
1fa961841d
Product and DFU String now tell the hardware they run on
2013-01-21 11:02:44 +01:00
04624af4e5
f4discovery: Adapt from the "native" file and add or change code where needed
...
- stm32_mem.py has problems with erasing the big pages, but dfu-util works
- serial GDB remote server doesn't work. It neither works for the STM32F107,
so maybe there is a problem with the usbd_f107_driver.
2013-01-21 11:02:44 +01:00
e373619374
stlink: LED is connected to GPIO9. Before LED was associated with the MCO Output.
2013-01-21 11:02:44 +01:00
8b1ec3151f
usbuart, jtagtap, swdptap: Factor out GPIO setup
2013-01-21 11:02:44 +01:00
7e91f68efa
f4discovery: Create a platforms directory for the F4 on the F4 Discovery board
2013-01-21 11:02:44 +01:00
15d7077115
traceswo: Move (now-constant) traceswo.c to platforms/stm32
2013-01-21 11:02:44 +01:00
09715e1db8
traceswo: factor out platform dependant parts
2013-01-21 11:02:44 +01:00
72ca77af53
stm32_can: Changes to get blackmagic to work
2013-01-21 11:02:44 +01:00
313a24b316
usbdfu: Allow for different, but constant flash page sizes
2013-01-21 11:02:43 +01:00
1eb9bfc650
platforms/stm32: Move more platform dependencies to platform.h
2013-01-21 11:02:43 +01:00
30d8aa1eb7
Move (now-constant) cdcacm.c to platforms/stm32
2013-01-21 11:02:43 +01:00
04415582bd
cdcacm: move non-constant parts to platform.[hc]
2013-01-21 11:02:43 +01:00
533608a2f4
Move usbuart to the stm32 directory
2013-01-21 11:02:43 +01:00
16ac8e0478
stlink: Add DFU capability
2013-01-21 11:02:43 +01:00
7188a4a8cb
Move usbdfu to platforms/stm32 directory
2013-01-21 11:02:43 +01:00
67f8176c5b
stlink: Add the UART
2013-01-21 11:02:43 +01:00
35d6adc236
native/usbuart: Move platform dependant parts to platform.h
2013-01-21 11:02:43 +01:00
16b9c1e83f
stlink: Update to current libopencm3 usb api.
2013-01-21 11:02:43 +01:00
ebb48245aa
stlink: Use a seperate linker file as stlink has only 64 kByte
2013-01-21 11:02:43 +01:00
ad9c76e97f
Update to current libopencm3 usb api.
2013-01-10 22:01:21 -08:00
09c0fb5773
Build with libopencm3 as a submodule.
...
Fix incompatibilities with latest libopencm3.
2012-10-22 18:45:42 +13:00
af1ef670ba
libftdi: Fixed delay function.
2012-07-05 19:10:08 +12:00
5dff263078
Add delay after reset request.
...
Hopefully this fixes problems observed with failing vFlashWrite.
2012-07-01 22:40:43 +12:00
53af978295
Allow user to specify JTAG IR lengths.
...
This allows the use of devices that shift out values other than 0x01
from IR.
2012-06-30 16:47:23 +12:00
01d0390b54
Fixed build for stlink platform.
2012-06-28 20:49:32 +12:00
466bb66424
Made cur_target, last_target static in gdb_main.c.
...
Added target destroy notify mechanism.
2012-06-27 21:26:08 +12:00
a16123997b
Added target.c for common target routines.
2012-06-24 19:08:49 +12:00
54f4467c0f
Added stlink platform for Discovery boards and ST's ST-Link hardware.
2012-06-10 19:06:37 +12:00
89bcdcc60a
Moved stm32 generic platform files out of native platform dir.
2012-06-10 17:34:26 +12:00
acff8d4497
Made jtagtap.c and swdptap.c STM32 generic.
2012-06-10 17:08:14 +12:00
8d190cdbb9
Renamed platforms to 'native' and 'libftdi' and moved into 'platforms' dir.
2012-06-10 16:40:07 +12:00
Antti Nykänen
Nicolas Schodet
Gareth McMullin
Benjamin Vernoux
Fredrik Ahlberg
Richard Eoin Meadows
Frantisek Burian
bon@elektron.ikp.physik.tu-darmstadt.de
Michael Tharp
Marc Singer
Paul Fertser
Gareth McMullin
Allen Ibara
Vegard Storheil Eriksen