5ae6f93af8
A groups children may also have children.
...
For instance, it could be a nested group or a footprint.
Fixes https://gitlab.com/kicad/code/kicad/issues/7025
2021-01-09 13:47:24 +00:00
78dcfb2392
Honour locks inside groups.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6841
2021-01-09 13:47:24 +00:00
7716f20a5b
Disentagle board edges from graphics in global delete.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7024
2021-01-09 13:47:24 +00:00
e4f29d358c
Formatting.
2021-01-09 13:47:24 +00:00
cf2dd0bd38
Fix edit_tool pad handling
...
Check for footprint editor
Promote pad edits to footprint edits iff
- Pad is locked
- Footprint is not
Otherwise, handle the pad normally and prompt for locked items if found
2021-01-08 19:46:14 -08:00
1c9d8a9f4c
Don't warn on locked conversion
2021-01-08 16:49:47 -08:00
51f02ecc51
Fix alignment tool with locked footprints
2021-01-08 13:58:26 -08:00
721155165d
Don't move locked footprint if pads are locked
2021-01-08 13:58:26 -08:00
d6448ce6b4
Expose settings manager to python
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6989
2021-01-08 16:47:20 -05:00
d0af4e9f9d
Save a cancel value when asked if it's not being used to cancel.
...
Many, many KIDIALOGs use OK/Cancel and then rename both buttons to
confirm or deny some action. In those cases we *do* want to store
the deny actions if they check "Do Not Show Again".
Fixes https://gitlab.com/kicad/code/kicad/issues/6979
2021-01-08 21:32:19 +00:00
8fffb75347
Allow custom pads with 0-sized anchor pads.
...
(Surprisingly we used to in 5.1, so this is a regression.)
Also had to go back to the nag dialog as on a small screen the infobar
comes up behind the dialog. A lot of the errors have also been turned
into warnings, so the overall effect should still be to reduce nagging.
Fixes https://gitlab.com/kicad/code/kicad/issues/6992
2021-01-08 20:43:02 +00:00
3467e643e5
Move pad locking from footprint to pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6997
2021-01-08 20:43:02 +00:00
6ffb72159a
Remove vias if they only connect to single layer
...
A via takes up zone space on additional layers, so if we are not
connecting to those layers, then we should remove it.
Fixes https://gitlab.com/kicad/code/kicad/issues/7004
2021-01-08 09:39:43 -08:00
1e96374715
Consider tracks and vias together
...
Dangling tracks and vias affect each other and need to be considered at
the same time in order to fully remove the dangling segments
2021-01-08 09:35:58 -08:00
93d203aef7
Fix a I18n issue: a string flagged as translatable cannot be empty.
2021-01-08 18:16:00 +01:00
9424d66d22
Move footprint when selecting locked pad
...
Prompting to unlock is obtrusive and blocks the common action of
dragging from a pad to align footprints. The less common action of
editing pads in layout can be accomplished after unlocking the pads
Fixes https://gitlab.com/kicad/code/kicad/issues/6997
2021-01-07 19:46:06 -08:00
24435df6b0
Don't update 3D view on cursor movement
...
Our rendering pipeline is not set up for this kind of speed,
and this is a blocking operation at the moment.
Note that we will get an update at the end of the move
because OnModify does it.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6819
2021-01-07 20:43:14 -05:00
61bddd0928
LAYER_PADS_TH is not a dependent layer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6999
2021-01-07 20:12:31 -05:00
111fa99f9f
PNS: Use last-segment posture optimization always
...
Also when auto-posture is enabled, don't flutter
until area threshold has been met.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
2021-01-07 20:12:31 -05:00
3fd128a75b
Performance enhancements.
2021-01-08 00:46:55 +00:00
5c22ffe422
Don't try to load a nonexistent layer setting
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6998
2021-01-07 19:09:54 -05:00
bf332b3189
Fix minor compil warnings
2021-01-07 20:55:24 +01:00
01fe3b91e9
Implement locking for graphic shapes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6972
2021-01-07 17:39:18 +00:00
6ca9a42251
Removes 3 other instances of a potential encoding problem
...
Signed-off-by: hoijui <hoijui.quaero@gmail.com>
2021-01-07 17:36:49 +00:00
8c8516b7b1
Remove formbuild URL from hypertext links.
...
Also adds a tooltip.
Fixes https://gitlab.com/kicad/code/kicad/issues/6982
2021-01-07 15:12:19 +00:00
e41c06304b
Don't show a leading ratline to a NPTH.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6960
2021-01-07 12:25:04 +00:00
f702b64b8d
Minor improvements to formatting & SNR.
2021-01-07 12:25:04 +00:00
84dd78e01d
Fix the install location for vcpkg built python modules
2021-01-07 00:08:11 -05:00
52f822dedb
Remember autotrack width setting
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6971
2021-01-06 20:11:32 -08:00
0234b7278a
PNS: Make DIRECTION_45 North be up everywhere
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
2021-01-06 21:47:06 -05:00
ad8136541b
Improve layout and terminology of Remove Unused Pads.
...
Also removes the limitation of removing outside layers for pads.
It's already supported in Pad Properties so it's odd to not support
it here.
2021-01-07 01:27:12 +00:00
f372c8025b
Better sizing for some conditional dialogs.
...
These dialogs don't have growable features but do have conditional
features, so the size is better adjusted automatically by the code
then by the user.
2021-01-07 01:27:12 +00:00
43e7b1ab6e
Set icons for front/back assembly layers
2021-01-06 13:49:00 -08:00
c0f940438a
Clarify Flip action
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6954
2021-01-06 13:02:44 -08:00
2a088e5c7b
Add conversion of circles to zones and enable in footprint editor.
...
Also rule areas, of course.
Fixes https://gitlab.com/kicad/code/kicad/issues/6966
2021-01-06 17:21:49 +00:00
70967bfebd
Hierarchical menu parents don't get ...'s.
...
Also moves the Convert menu up a level. Nested hierarchical menus
should be avoided whenever possible.
2021-01-06 17:21:49 +00:00
8aeaaf99ef
Disable net selector for non-free vias.
...
Also moves the checkbox up so this relationship is clearer.
Fixes https://gitlab.com/kicad/code/kicad/issues/6967
2021-01-06 15:49:12 +00:00
366c7096b3
More double- and triple-pointer erradication.
2021-01-06 14:37:38 +00:00
426536c381
Don't show empty-net synthetic net in Net Inspector.
...
Also fixes an assert when deleting a net inspector row with no
parent row.
Fixes https://gitlab.com/kicad/code/kicad/issues/6962
2021-01-06 14:27:02 +00:00
46c4727783
Make MSVC happy again
2021-01-05 20:56:37 -05:00
2a24886d47
Icons: remove more duplicates
2021-01-06 00:35:20 +00:00
6fd718fbd8
Icons: replace old with new
2021-01-06 00:35:20 +00:00
5d9b2d3fea
Icons: new filter icon
...
+ remove icons where they don't make sense.
2021-01-06 00:35:20 +00:00
54724096ea
Icons: consistency between Eeschema and Pcbnew
2021-01-06 00:35:20 +00:00
fd04a176a4
Remove full path from drill report
...
Leaves just file name in place. Full paths are considered a security
risk for some
Fixes https://gitlab.com/kicad/code/kicad/issues/6949
2021-01-05 16:22:08 -08:00
71a93c71f7
Prevent footprint editor snapping to footprint
...
Inside the footprint editor, we only want snap points from the base
elements
Fixes https://gitlab.com/kicad/code/kicad/issues/6948
2021-01-05 16:08:30 -08:00
e7b047660c
PNS: Correctly assemble lines with reversed arcs
2021-01-05 17:57:21 -05:00
feda03f69b
PNS: Fix arc orientation when assembling lines with backwards arcs
2021-01-05 17:57:21 -05:00
7431d5c985
PNS: First pass at updating meander placers for arcs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6464
2021-01-05 17:57:21 -05:00
8619086cf2
PNS: re-enable optimization of colinear segs in lines with arcs
2021-01-05 17:57:21 -05:00
8901e71fc8
PNS: Fix loop removal, make walkaround less broken for arcs
2021-01-05 17:57:21 -05:00
5676117d0b
Make small drill marks size configurable via advanced config for both printing and plotting
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1972
2021-01-05 22:37:34 +00:00
81aa91ce2a
Run insideCouryard on all matching footprints, not just the first.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6945
2021-01-05 22:22:25 +00:00
4710b709d9
Only darken, don't hide vias unless requested
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6912
2021-01-05 14:00:15 -08:00
a9d4d9d7f0
Modify insideArea() to return true for zones only when fully inside.
...
Intersections is enough for other objects.
This is also a bit of a DRC performance improvement.
Fixes https://gitlab.com/kicad/code/kicad/issues/6934
2021-01-05 21:43:04 +00:00
02cd8c99cd
Better error messages when routing can't be started.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6541
2021-01-05 18:47:58 +00:00
b19ccd819e
Quiet compile warning
2021-01-05 09:16:38 -08:00
88d42724e6
Remove diff-pair-gap handling from single-line-router.
...
We can't really support it until we do min/max/opt shoving and
dragging.
Fixes https://gitlab.com/kicad/code/kicad/issues/6932
2021-01-05 16:54:52 +00:00
d975f2f6aa
Commenting and naming for clarity.
2021-01-05 16:54:52 +00:00
a48f0d21f7
More consistency in clearance resolution messages.
2021-01-05 16:54:52 +00:00
f7b20611c1
Enforce hole-to-hole min when placing diffpair vias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6931
2021-01-05 00:26:49 +00:00
93bd2171ab
Formatting.
2021-01-05 00:26:49 +00:00
b40e3a39f5
Minor cleanup.
2021-01-04 23:59:36 +00:00
d24b034cbc
Cleanup (and a minor performance improvement).
2021-01-04 22:32:29 +00:00
597a74af9a
Corrects text of orthogonal dimensions
...
The 'outisde' position is now 'outside' in all orientations
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5821
2021-01-04 19:53:39 +00:00
2ea6bc5529
Formatting.
2021-01-04 19:19:55 +00:00
648c42f643
Show collisions preventing routing from starting.
...
Also introduces a callback to the infobar so that the view can be
cleaned up when the timer expires.
Fixes https://gitlab.com/kicad/code/kicad/issues/6930
2021-01-04 19:19:55 +00:00
354d9b4e63
Simplify layer pair indicator icon.
...
It now just has top layer / bottom layer from the router's layer
pair. The current layer is visible in the drop-down just to the
left, and the via stuff was confusing anyway.
2021-01-04 19:19:55 +00:00
5c8927678a
Don't link a project to a board more than once
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6929
2021-01-04 13:23:19 -05:00
76cfd19621
Icons: fix incorrect icon in footprint browser
2021-01-04 01:44:02 +00:00
c09d3b765a
Slight improvement to error text for when drill is same size as pad.
2021-01-04 00:03:21 +00:00
33aa6edb01
Don't run clearance tests on unflashed NPTH pad layers.
2021-01-04 00:03:21 +00:00
d0b82ea26e
Show better descriptions of through-hole pads.
2021-01-04 00:03:21 +00:00
7378c2c3b3
Implement max hole size DRC checks.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6893
2021-01-04 00:03:21 +00:00
71215bcab3
Make sure TH pads get collision layer highlighted.
...
Also cleans it up to centralise all the decision-making.
Fixes https://gitlab.com/kicad/code/kicad/issues/6925
2021-01-03 21:16:09 +00:00
491fc2c8f2
Save DXF plot params to file and remove some dead code.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6720
2021-01-03 14:22:25 +00:00
a1d7a959f7
more fixes and enhancements in DIALOG_EXPORT_STEP.
2021-01-03 11:38:09 +01:00
5db75805bd
Step exporter: better values for min distance between 2 points to merge them.
...
- The default value is 0.01 mm (according to comments and similar to the 3D viewer
settings that uses 0.02 mm)
- The export dialog has now 3 values 1 micron, 0.01mm (default) and 0.1 mm
The 0.1 micron option is removed: it makes no sense for a mechanical tolerance.
2021-01-03 11:01:03 +01:00
f01297fedd
Convert an annoying message box to an infobar
2021-01-02 22:14:10 -05:00
154e19b6e7
Icons: use common prefix for small 16x16
2021-01-02 23:16:33 +00:00
5a3f4f52df
Icons: add new icon for Pcbnew 'Special Tools...'
2021-01-02 23:16:33 +00:00
6d3c1c7716
Icons: remove unused sources/duplicates + rename
2021-01-02 23:16:33 +00:00
a06387fafd
Fix warning at compile time
2021-01-02 22:42:16 +00:00
f691828c8f
Nullptr safety.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6862
2021-01-02 22:26:12 +00:00
7e58f1aa9f
Fix display of pads in high contrast mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6912
2021-01-02 14:16:17 -05:00
8b849b1c49
Fix several bugs in hull push-back with vias.
...
1) take hole plating thickness into account
2) build hulls specifically for via so pushing back to the hull doesn't
have to try and figure out how much extra to push back for the via
and/or hole
3) clear MK_HOLE flags when colliding with the pad itself so that we
don't get stuck in HOLE mode
4) move flag setting/clearing to updateNearest() so that it will keep
track of the state of the nearest collision
Fixes https://gitlab.com/kicad/code/kicad/issues/6913
2021-01-02 19:14:44 +00:00
13094fdc28
Formatting.
2021-01-02 18:38:17 +00:00
85e42890c4
Distinction between via and via hole probably not useful.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6913
2021-01-02 16:41:09 +00:00
068af7d328
When routing don't give NPTH holes a copper clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6903
2021-01-02 16:33:51 +00:00
b5e7611696
Don't cross-pollute CONSTRAINTs.
...
If you want the HOLE_CLEARANCE, then ask for it.
2021-01-02 16:33:51 +00:00
eba7cb222c
PNS: Fix initial posture guess for pads
2021-01-02 10:32:15 -05:00
6b6694f55f
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6913
2021-01-02 15:04:30 +00:00
42c114f6ed
Record status of via dragging in Walkaround mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/3967
2021-01-02 00:31:02 +00:00
419d8dcd6f
Minor cleanup.
2021-01-01 23:42:44 +00:00
8a049cf290
Make sure bounding boxes get cached on rule areas.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6898
2021-01-01 23:17:49 +00:00
018c17399d
SNR.
2021-01-01 23:17:49 +00:00
8ee72853fb
Be more targetted on when we load DRC Rules for better performance.
2021-01-01 23:17:49 +00:00
a69a4be853
Fix build error with icon names
2021-01-01 13:13:33 -08:00
72c27b2e33
Make expand selection stop at vias
...
During the first expansion, we are supposed to stop at vias and branches
(where three track ends connect). This needs to account for the number
of vias and tracks not just tracks
2021-01-01 09:31:44 -08:00
fc1b0ec11f
Improve feedback when routing in highlight collisions mode.
...
In particular, when Allow DRC violations is NOT turned on and we
bump in to an obstacle.
2021-01-01 17:25:37 +00:00
8de9cff4e0
Change environmental variables to human-readable
...
Versions specific variables that may point to objects that change
through versions, allowing multiple KiCad versions to operate correctly
(even on MSW) on the same machine.
2021-01-01 16:20:35 +00:00
6a81113c2d
Better comments in files related to my previous commit.
2021-01-01 17:09:32 +01:00
93e186f53e
SelectFootprintFromLibTree(): fix a issue similar to commit 27d47743.
...
Force immediate deletion of the APP_PROGRESS_DIALOG (do not use Destroy() )
because on Windows, APP_PROGRESS_DIALOG has some side effects on the event loop
manager. A side effect is the call of ShowModal() or ShowQuasiModal of a dialog
following the use of a APP_PROGRESS_DIALOG (if not deleted) has a broken behavior
(incorrect modal/quasi modal behavior).
2021-01-01 15:59:15 +01:00
f8f34982c0
Escape PCB text
...
Also keep a fail-safe for unescaping strings that are not previously
escaped
Fixes https://gitlab.com/kicad/code/kicad/issues/6901
2020-12-31 17:17:27 -08:00
3ba17e0a16
Formatting.
2021-01-01 01:02:06 +00:00
ecc0e861d3
Implement hole clearance and hole-to-hole clearance in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6882
2021-01-01 00:31:36 +00:00
5d8e6020d1
Improve clarity.
2021-01-01 00:31:36 +00:00
0e3c9de684
Formatting.
2021-01-01 00:31:36 +00:00
e060ee2a53
Factor in all clearance types when asking for worst clearance.
2021-01-01 00:31:36 +00:00
1b93663627
Formatting.
2021-01-01 00:31:36 +00:00
9a0f685a75
PNS: Consider arcs when searching for lines between joints
2020-12-31 13:05:43 -05:00
73248ab219
PNS: correct initial segment direction for posture solver
2020-12-31 13:05:43 -05:00
381aabdd2a
PCB_TARGET: add missing GetMsgPanelInfo() virtual function.
2020-12-31 15:46:58 +01:00
a6a2dae480
Footprint editor: ensure the pad editor is closed before load a new footprint.
...
When editing a new footprint from the board editor, if the Footprint editor has the pad editor
open, there is a risk of crash when replacing the footprint in edit.
Fixes #6892
https://gitlab.com/kicad/code/kicad/issues/6892
2020-12-31 10:53:14 +01:00
82e728dbf6
Remove drawing of annular rings in high contrast
...
High contrast should not show the annular rings from other layers. Once
the ring is removed, we hide the annular when not focused on a flashed
layer
Fixes https://gitlab.com/kicad/code/kicad/issues/6896
2020-12-30 17:38:30 -08:00
60fd7fdbb2
Fix comment
2020-12-30 18:52:56 -05:00
510db66f0e
PNS: Fix rollback for arc traces
...
PNS: Update posture solver after rollback
2020-12-30 18:23:24 -05:00
6105ac50da
ADDED: Default hotkey of CTRL+/ for switch corner rounding
2020-12-30 18:23:24 -05:00
b5b64a55ad
PNS: Only run optimization if lastNode is valid
2020-12-30 18:23:24 -05:00
79502a0d88
PNS: A new approach to arc placement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6334
2020-12-30 18:23:24 -05:00
8d81abb57a
Consistent use of spaces in strings.
2020-12-30 22:57:50 +00:00
5a3e5781bf
Allow polygon drawing on edge cuts and courtyard
...
Prevents line splitting behavior needed in v5 when drawing polygons on
courtyards. Also provide property dialog with some smarts to handle
special layers
Fixes https://gitlab.com/kicad/code/kicad/issues/6900
2020-12-30 14:10:30 -08:00
b168b74919
CADSTAR Archive Importer: Fix position of multiline text with NO_ALIGNMENT in CADSTAR
2020-12-30 18:53:43 +00:00
ffee24be63
CADSTAR PCB Archive Importer: Rewrite loadBoardStackup routine
...
Uses BOARD_STACKUP::BuildDefaultStackupList instead of trying to build the stackup from scratch
Fixes several asserts / incorrect stackups in some older boards
2020-12-30 18:53:43 +00:00
a2cbbb963e
CADSTAR PCB Archive Loader: Correctly handle Dimension text
...
Do not parse fields in dimension text to allow splitting it into prefix and suffix
2020-12-30 18:53:43 +00:00
f74a86b7e1
Add missing dimension objects to BOARD::Move collector
...
Fixes import of orthogonal dimensions
2020-12-30 18:53:43 +00:00
45b621a3d1
CADSTAR PCB Archive Importer: Fix Import of Linear Dimensions (Angular dimensions not supported)
2020-12-30 18:53:43 +00:00
fbac766254
CADSTAR PCB Archive Importer: Refactor layer mapping and fix assert
...
An assert was being fired to due to incorrect BOARD_STACKUP_ITEM_TYPE on some boards
2020-12-30 18:53:43 +00:00
0a1045300b
CADSTAR PCB Archive Importer: Fix loading of net class settings
2020-12-30 18:53:43 +00:00
cde433c82e
CADSTAR PCB Archive Importer: Transfer Project to allow importing of Text Variables
2020-12-30 18:53:43 +00:00
03a23db4f7
CADSTAR PCB Archive Importer: Load PCB Text Variables to KiCad project
2020-12-30 18:53:42 +00:00
9ed4780fec
CADSTAR Archive Importer: Change architecture to Parse CADSTAR fields and store them in a static map
...
Architecture of the parser changed to have a shared PARSER_CONTEXT between all the individual parsers.
Parses CADSTAR fields such as <@DESIGN_TITLE@> or <@SHEET_NUMBER@> and replaces with an equivalent KiCad Text Variable.
2020-12-30 18:53:42 +00:00
bf9501e1d4
PNS: Fix auto-posture when placing via
2020-12-29 21:14:36 -05:00
689da3794d
PNS: Merge co-linear segments during placement
2020-12-29 21:14:36 -05:00
4c0aa6db1a
PNS: Disable smart pads optimization for vias
...
There is not much point with the current algorithm and it
breaks auto-posture.
2020-12-29 21:14:36 -05:00
94bf88d820
Pcbnew: Prevent selections jumping when dragged after flip or rotate
...
CHANGED: If you flip or rotate an item or selection of items, move
the mouse, press 'M' and start moving the mouse, the selection jumps
to where the mouse is. This MR fixes that so it doesn't happen.
This bug was reported against the 5.1.x branch but also affects the
5.99 branch. This MR is for the 5.99 branch.
Fixes https://gitlab.com/kicad/code/kicad/issues/4069
2020-12-30 01:02:04 +00:00
0b0af2f545
Fix layer ordering of pad net names
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6881
2020-12-29 18:31:44 -05:00
a637f310d0
Store zone display mode in project local settings
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6886
2020-12-29 17:19:01 -05:00
23f81412c3
Ensure connectivity is updated before filling zones
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6844
(maybe)
2020-12-29 14:58:45 -05:00
241823647b
DRC: Fix a minor memory leak
2020-12-29 14:58:45 -05:00
bc712a7383
Remove some stray printfs
2020-12-29 14:58:45 -05:00
76e8c62269
PCB_VIEW: Fix a few ASAN issues
2020-12-29 14:58:45 -05:00
35a5781f68
Don't look at project layer visibilities for footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6873
2020-12-29 17:03:43 +00:00
97a99beef5
Fix missing ENUM_TO_WXANY decl.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6879
2020-12-29 14:37:03 +00:00
efd16dca66
Fix a bunch of issues with group selection and highlighting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6686
2020-12-29 12:41:24 +00:00
f7a6dc26e9
Give GROUP_PROPERTIES_DIALOG its own files.
2020-12-29 12:41:24 +00:00
81d4e06f00
PNS: Consider pad orientation when routing
...
PNS: Skip smart pads when posture was manually forced
This allows a more-correct pad breakout to be chosen when
smart pads is off.
2020-12-29 01:06:46 -05:00
96d49d1473
PNS: Improved auto-posture when starting from a segment
...
The previous auto-posture algorithm worked great for pads
but not so great when starting routing from a segment.
Now we can optimize the posture based on the starting
segment if one exists, to maximize the "obtuseness" of the
posture.
2020-12-28 23:51:13 -05:00
3adff647a7
PNS: Preserve nearest vertex when dragging in shove mode
2020-12-28 19:44:39 -05:00
55394f343d
Don't use snapping for a selection interaction
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6856
2020-12-28 17:26:39 -05:00
be294dabce
PNS: Snap back to last valid point when committing a drag
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6651
2020-12-28 16:36:42 -05:00
e5b7e7d2b2
Add missing header needed for gcc builds
2020-12-28 16:02:06 -05:00
3e2aa8df3a
Thread safety for pad effective shape building.
2020-12-28 20:44:46 +00:00
cfb4e34b07
Cleanup.
2020-12-28 20:44:46 +00:00
93466fa165
Fix crash when adding 3D Models via Python
2020-12-28 20:03:54 +01:00
17cf2466aa
Fix overlapping definitions warning
2020-12-27 19:42:04 -05:00
c4bfca251b
PcbNew: show file format conversion warning in infobar
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6200
2020-12-27 19:17:58 -05:00
3c87e67753
PNS: Allow committing routes even when cursor moves beyond valid solution
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6651
2020-12-27 17:14:38 -05:00
1fc4523711
Remove pad-size-setting hack from PCB_PAINTER.
...
Also improves the pad warning and error messages, and moves a few
remaining nags from the setting infrastructure to the warning
infrastructure.
Fixes https://gitlab.com/kicad/code/kicad/issues/6141
2020-12-27 21:11:27 +00:00
2cdf9875b9
PNS: fix off-by-one in dragCorner45
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6644
2020-12-27 15:58:36 -05:00
c615b7a49b
PNS: make initial direction behavior consistent with fix-all enabled
2020-12-27 15:21:55 -05:00
132e78d2b8
Fix pcbnew collector prioritization
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6307
2020-12-27 13:50:11 -05:00
3b25e7344a
Fix deprecation warning. PyEval_InitThreads() is not needed for Python >= 3.7
...
See: https://docs.python.org/3/c-api/init.html#c.PyEval_InitThreads
With Python 3.7 this function is called by Py_Initialize()
With Python 3.9 this function is deprecated and does nothing
2020-12-27 19:18:49 +01:00
1c79e3174c
Pcbnew: Prevent footprint jumping when starting to drag it
...
CHANGED: When dragging a footprint, if the mouse isn't directly over the
footprint anchor when 'D' is pressed, the footprint center will jump to
the mouse position when dragging begins. This MR uses the current
mouse position instead of the footprint anchor as the inital reference
point when starting to drag.
Fixes https://gitlab.com/kicad/code/kicad/issues/6813
2020-12-27 17:43:52 +00:00
1579ce9f9e
Separate net updating from Edit Tracks & Vias into a second pass.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6858
2020-12-27 16:35:38 +00:00
10e51bfea7
Don't apply "normal" locking strategy to alignment options.
...
It's much more useful to use the locked items as targets.
Also fixes some issues with commits getting the wrong items when
pads are promoted to footprints.
Fixes https://gitlab.com/kicad/code/kicad/issues/6859
2020-12-27 15:02:25 +00:00
e3d95cc2c8
Formatting.
2020-12-27 15:02:25 +00:00
a675f1f9c5
pcb_painter, draw pad clearance outlines: use the pad shape for non copper layers.
...
For copper layers, if the pad shape is not on the active layer, only the hole
shape clearance is shown (this is correct).
But for non copper layers using the hole shape clearance make no sense
(as long as showing the clearance makes sense for some layers).
2020-12-27 11:20:48 +01:00
97f3c323c3
Pcbnew: fix missing escaping of texts in DIMENSION when saving the .kicad_pcb file.
...
Fixes #6855
https://gitlab.com/kicad/code/kicad/issues/6855
2020-12-27 10:18:23 +01:00
e1f76ea2ab
Gracefully handle dots in the outline path.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6854
2020-12-27 01:01:25 +00:00
3aca0e1853
Make sure we nofity of self-intersecting outlines.
2020-12-27 01:01:25 +00:00
8300e17b69
Fix botched attempt to report hole violations between no-net items.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6851
2020-12-26 16:24:51 +00:00
ab97035ecb
Handle closed shapes being processed after other shapes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6845
2020-12-26 12:57:49 +00:00
af2219ba7f
Finish implementation of hole clearance checking.
...
It appears we never did via hole testing, and pad hole testing didn't
appear to get much testing.
2020-12-25 22:32:19 +00:00
0d57f90982
Make sure SCH-related frames use the schematic worksheet color.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6843
2020-12-25 16:59:41 +00:00
7a081b7c04
Naming consistency.
2020-12-25 16:59:41 +00:00
04c8d0e9d8
Comments.
2020-12-25 16:59:41 +00:00
60503652a1
Kick-start appearance panel to redraw on Mac
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6827
2020-12-25 10:44:18 -05:00
84ce814037
Repair segment ownership logic for rects and curves.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6847
2020-12-25 13:21:20 +00:00
9c4d3add15
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6845
2020-12-25 12:07:26 +00:00
8ad89ae457
PNS: fix manual posture mode
2020-12-24 17:31:54 -05:00
ef25c78a04
Separate polygonization error from chaining error.
...
This way we can report anything that doesn't exactly chain while still
applying a fudge factor for our own stuff.
Fixes https://gitlab.com/kicad/code/kicad/issues/1795
2020-12-24 21:02:14 +00:00
a9ff98bccc
Allow selecting locked pads at all times
...
Locked pads are a bit different from other locked items
and there are sufficient reasons to need to select them
that it makes sense to introduce this inconsistency.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6837
2020-12-24 14:35:44 -05:00
38b8bc89ac
Fix a pair of typos.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6839
2020-12-24 19:32:24 +00:00
d13de9c6c1
Zones: layer set must be initialized after m_isRuleArea
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6814
2020-12-24 11:29:23 -05:00
98c437e70f
Show the read-only notification for objects, too
2020-12-24 08:42:38 -05:00
db0df1fdc9
Don't try to update non-existent zone layers
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6803
2020-12-24 08:42:38 -05:00
5fffde09d4
Improve SNR and formatting.
2020-12-24 10:36:29 +00:00
d0429ced8d
Fix layer ordering logic for non-copper layers
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6817
2020-12-23 22:09:09 -05:00
8a2667c4c3
PNS: Fix all segments by default (and make optional)
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5920
2020-12-23 21:55:43 -05:00
8c247fc97c
PNS: Add a setting to disable posture solver
...
PNS: Prevent autoposture flutter when trail has little area
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6797
2020-12-23 21:02:17 -05:00
eb1f07bade
Icons: standardise `export_png` to match set
2020-12-24 01:02:03 +00:00
d2018b122b
Icons: unify export_svg with the rest of the set
2020-12-24 01:02:02 +00:00
6489781408
Icons: use correct icons for show/hide ratsnest
...
- Remove old icon remnants
- Recolour show/hide_ratsnest to match KiCad style
2020-12-24 01:02:02 +00:00
6b420b191a
Use color theme backgrounds in page previews.
...
Also includes a *lot* of const fixing to make it happen.
Fixes https://gitlab.com/kicad/code/kicad/issues/6811
2020-12-23 23:18:38 +00:00
ffe7d2ea49
Only draw group boxes when selected.
...
Also ignore footprint groups when in board editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/6826
2020-12-23 21:43:32 +00:00
17800b926f
Honour couryard_clearance rules when checking for courtyard overlaps.
2020-12-23 17:34:21 +00:00
f30fa60ed7
Need to start with full layer set if we want to end up with any.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6822
2020-12-23 15:15:09 +00:00
2f087dfa1b
Fix crash bug trying to delete zone from list twice.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6815
2020-12-23 14:24:35 +00:00
912657dd23
Component dragger: make relaxed segment pickup work for PTH pads
2020-12-22 22:43:44 -05:00
Jeff Young
Seth Hillbrand
Jon Evans
jean-pierre charras
hoijui
Marek Roszko
Michael Kavanagh
Zoltan Gyarmati
Jeff Glass
Carlo Bramini
Allan Nordhøy
Roberto Fernandez Bautista
PJM
Jan Mrázek
Thomas Pointhuber
Peter Montgomery