Tomasz Wlostowski
965ab42938
router: when dragging segments, don't snap to other segments on the same layer. Fixes drag flickering for short segments.
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9720
2021-12-15 01:48:04 +01:00
Tomasz Wlostowski
2ae3a83b54
router: fix use-after-free crash in single trace shove routing when m_endItem's owning NODE is erased by the springback algorithm.
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9994
2021-12-15 01:33:05 +01:00
Jon Evans
b291d6c810
Fix success conditions in DP placer
...
The placer can sometimes generate segments that are not quite parallel.
Use a different tolerance for ApproxParallel to account for this.
Also set a minimum score for placement judging so that any placement
that doesn't violate DRC can be placed.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9948
2021-12-12 13:05:38 -05:00
jean-pierre charras
6d0d4e0db9
Pcbnew, router tool: ensure switching layer by + or - works when starting routing.
...
Fixes #9936
https://gitlab.com/kicad/code/kicad/issues/9936
2021-12-11 09:54:03 +01:00
Seth Hillbrand
77fbb495f2
Highlight net during inline drag
...
Keep consistent UX between inline drag and drag started in the router
tool itself by highlighting the net being dragged
Fixes https://gitlab.com/kicad/code/kicad/issues/9919
2021-12-09 09:28:43 -08:00
Jeff Young
95087c6de5
Fix clearance outlines for router head.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9885
2021-12-06 15:51:53 +00:00
Jon Evans
5ba215c8ea
Use actual width when previewing PNS lines
2021-12-05 13:41:39 -05:00
Jon Evans
7de9e48b57
PNS: Fix tuning calculations through locked segments
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9727
2021-12-05 13:35:28 -05:00
Jeff Young
5cb2641142
Fix nullptr dereference in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9844
2021-12-02 13:20:44 +00:00
Jeff Young
a596a1f2e2
ROUTER_TOOL needs to handle pads not handled by router itself.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9839
2021-12-01 22:25:02 +00:00
Jeff Young
3c0b10b022
Don't use approximated shapes for router hulls.
...
We only do 45-degree routing anyway so we might as well build an
octagonal-based hull from the get-go.
Fixes https://gitlab.com/kicad/code/kicad/issues/7672
Fixes https://gitlab.com/kicad/code/kicad/issues/9544
Fixes https://gitlab.com/kicad/code/kicad/issues/9833
2021-12-01 19:44:30 +00:00
Jeff Young
09ed60feb3
Don't make inferences about object type based on shape.
2021-12-01 19:44:30 +00:00
Ian McInerney
63560ecd7b
Remove RM_Smart state from router tool
...
It was never fully implemented and there was no way to switch into this
route mode.
2021-12-01 09:52:37 +00:00
Jon Evans
a746d31038
PNS: Fix loop removal outside shove mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9680
2021-11-27 15:21:47 -05:00
Jon Evans
8a0f8c329f
PNS: Fix DP gateway generation when pad distance < gap
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9306
2021-11-27 14:03:19 -05:00
Seth Hillbrand
4b226b8172
Unify our breakTracks routines
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9793
2021-11-27 06:34:47 -08:00
Jeff Young
6652e5acf4
Draw pad holes when dragging.
...
Most of the time they're under the pad, but the provide needed
info when the hole is larger than the pad.
Fixes https://gitlab.com/kicad/code/kicad/issues/9786
2021-11-27 00:55:09 +00:00
Jeff Young
9547c72e73
Teach router about different keepout rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9786
2021-11-27 00:55:04 +00:00
Jeff Young
99ec2b1801
Don't hide original object when highlight is only part of it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9772
2021-11-25 23:42:13 +00:00
Jon Evans
da458535c4
PNS: Avoid flickering clearances on new items
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9773
2021-11-25 15:38:04 -05:00
Jon Evans
63718323bc
PNS: Holes need to be moved with solids
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9773
2021-11-25 15:31:18 -05:00
Jon Evans
b4342d813b
Fix SHAPE_LINE_CHAIN::Slice when end is an arc followed by a point
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9770
2021-11-25 10:05:33 -05:00
Jeff Young
ade8fe4333
When dragging footprints pads with holes also need to be taken along.
...
Otherwise (aside from not colliding with their dragged location) we
won't update their locations and then if they happen to be the first
pad in the footprint we'll try to update the footprint's location post-
drag with the pad offset (which will be {0,0}.
This is easily reproducible with the test document in the bug in the
"fixes" statement.
Fixes https://gitlab.com/kicad/code/kicad/issues/9391
2021-11-25 14:54:12 +00:00
Jeff Young
f9e1429c60
Naming conventions.
2021-11-25 14:54:12 +00:00
Jeff Young
5985a21b74
Offset internal items by drag amount.
...
Some tools move only preview items while keeping the real items
hidden. Those tools must use this new offset parameter.
Other tools move the real items. Those tools can ignore this
parameter (which will default to {0,0}).
Fixes https://gitlab.com/kicad/code/kicad/issues/9391
2021-11-25 14:54:12 +00:00
Jeff Young
ba6ae4fa9b
Kicad has many plugins. This one is for the pcb.
2021-11-25 12:56:46 +00:00
Jeff Young
1c3e1df3ca
Not all holes are round.
...
We currently only need this to work for vias as we're a long way
from being able to support it for pads, so just check the hole
shape.
Fixes https://gitlab.com/kicad/code/kicad/issues/9735
2021-11-23 14:36:05 +00:00
Tomasz Wlostowski
e56e61ffb5
router: fix typo in the DP tuning fix patch
2021-11-23 00:21:38 +01:00
Tomasz Wlostowski
89228e1ebe
router: increase parallelity detection threshold for AssembleDiffPair()
...
Partially fixes the misrecognized diff pairs issue.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8567
2021-11-22 01:35:12 +01:00
Tomasz Wlostowski
e60386f028
router: disable 'limit corner count' optimization for via dragging
...
It seems to be completely preventing optimization instead of preventing over-optimization in case the head is a dragged via.
To be investigated in more details in V7.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8665
2021-11-22 00:05:17 +01:00
Tomasz Wlostowski
ccf9a72078
router: fix ghost dots issue in router preview items
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8665
2021-11-22 00:05:17 +01:00
Roberto Fernandez Bautista
bbafce6ab3
PNS: Don't clip the line in the middle of an arc - just start again
...
In shove mode, returning an empty line results in keeping the current
head, which should be okay for now.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9023
2021-11-21 19:53:03 +00:00
Roberto Fernandez Bautista
4e0ad07eb0
PNS::Shove Add margin when generating hulls for arc segments
...
Partially fixes https://gitlab.com/kicad/code/kicad/-/issues/9023
There is still a case where if the shover does not find a solution,
we try clipping the arc and it still collides.
2021-11-21 17:13:21 +00:00
Jon Evans
b1878fcc54
ClipVertexRange: fix fallout of NextShape API change
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9711
2021-11-21 11:03:22 -05:00
jean-pierre charras
302c5ab537
Fix an issue created by commit 9e3362d1
.
...
the issue was the graphic cursor was locked on the first snap point
in route mode, once a snap point is found.
2021-11-21 15:37:03 +01:00
Tomasz Wlostowski
c40e921cb3
router: remeber to make a shove lockpoint when placing a lone via
...
Note to self: works around a possible bug in CommitPlacement()/RewindToLastLockedNode()
fixes: https://gitlab.com/kicad/code/kicad/-/issues/9695
2021-11-21 00:18:20 +01:00
Jeff Young
9e3362d14c
Snap mouse point before picking startItem.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9700
2021-11-20 13:44:16 +00:00
Jeff Young
1f4858c314
Show holes in router preview items for vias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9658
2021-11-20 12:21:24 +00:00
Jon Evans
ed478f5ec0
Revert to ERROR_INSIDE for complex pad shape hulls in PNS
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9544
2021-11-15 19:15:05 -05:00
Jon Evans
8ec3ce99ae
PNS: Update shover when autocompleting on item
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9598
2021-11-10 18:17:56 -05:00
Jon Evans
59807d8d26
A better solution to discarding pending shove operations
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9553
2021-11-09 00:00:54 -05:00
Johannes Pfister
64f77b3596
PNS: Add support for 90-degree corner modes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6902
2021-11-03 02:14:23 +00:00
Jon Evans
153594b9ea
PNS: Actually implement the AbortRouting API
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9425
2021-10-31 16:06:57 -04:00
Jon Evans
08700e3522
Router: show corner style in message panel
2021-10-30 09:08:52 -04:00
Jon Evans
e6c3027531
Action string typo fixes
2021-10-30 08:47:36 -04:00
jean-pierre charras
63d4d84aaa
pcbnew, router: fix a crash and some other issues related to microvias and blind/buried vias
...
- fix crash when trying to create a microvia from a internal layer (boards with > 4 layers)
- fix a bug that allowed to create a non through hole via on only one layer
- fix a bug that allowed to create a microvia on non adjacent layer pair
- when placing a via and selecting the target layer from dialog, show only allowed layers.
Fixes #9477
https://gitlab.com/kicad/code/kicad/issues/9477
2021-10-29 17:54:04 +02:00
Electro707
4afb59fda0
Added feature to switch between router modes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9414
2021-10-28 22:46:05 +00:00
Jon Evans
4a9b3d9673
PNS: clear leftover vias from previous trace in DP placer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9283
2021-10-27 21:58:42 -04:00
Jeff Young
36d11f745e
Update ratsnest while dragging footprints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9391
2021-10-25 21:45:30 +01:00
Jon Evans
328d3d0d77
PNS: Fix rule resolution when starting from PTH
...
Have to use the routing start layer, not the first
layer of the PTH, to get the appropriate sizes
2021-10-23 22:46:31 -04:00
Jon Evans
3b18dce911
Remove vestigal setting
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9444
2021-10-23 22:12:25 -04:00
Seth Hillbrand
2a6c73b8df
Check for hole before highlighting
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9423
2021-10-19 11:25:00 -07:00
Seth Hillbrand
e9205a0740
Fix mistaken comparison in highlighting
...
Need to compare between elements colliding
Fixes https://gitlab.com/kicad/code/kicad/issues/9413
2021-10-18 13:38:27 -07:00
Seth Hillbrand
faba2b06c2
Lock track width after placing segment
...
We don't want to allow the full track width to change after placing a
segment when we are in follow-segment mode. This would require either
ripping up and re-solving the existing track or allowing potential DRC
errors.
Fixes https://gitlab.com/kicad/code/kicad/issues/9395
2021-10-14 09:21:14 -07:00
Seth Hillbrand
35e90d0cf4
Allow changing router mode while routing
...
Keeps shove active even when not using to allow switching modes during
routing.
Fixes https://gitlab.com/kicad/code/kicad/issues/9342
2021-10-12 09:55:34 -07:00
Seth Hillbrand
7f1247a23c
Update track width when changed
...
Tracks starting from pads should change in response to the track width
changing despite having the "follow existing track" width selected.
2021-10-12 09:55:34 -07:00
jean-pierre charras
4d6b1a4e36
pns_diff_pair_placer: fix empty message when a signal of a pair is not found.
...
Fixes #9334
https://gitlab.com/kicad/code/kicad/issues/9334
2021-10-08 14:57:01 +02:00
Seth Hillbrand
a8ec3b58ed
Use via's real drill value for hole size
...
If the via drill is "Default" be sure to get the default value rather
than the placeholder
Fixes https://gitlab.com/kicad/code/kicad/issues/9313
2021-10-06 11:00:58 -07:00
Roberto Fernandez Bautista
2e120528c8
Length Tuner: Allow single meander when it fits on its own
2021-09-28 18:50:31 +01:00
Roberto Fernandez Bautista
71156368c9
Length Tuner: Allow controlling the side of the meander using the cursor
...
Also fixes an issue that did not allow single meanders to be placed
2021-09-28 18:50:31 +01:00
Mike Williams
726f9ebe3d
Pcbnew: Router tool should not block drag selection when idle
...
The other drawing tools allow drag selection while idle. Also, it makes
it more obvious to the user when accidentally drag selecting while
routing than just doing nothing on a drag with the routing tool selected
and idle.
2021-09-27 16:05:13 +00:00
Jeff Young
5f3c67bd2b
Fill in some missing GetMsgPanelItems and make some others consistent.
...
Also expunges a std::vector<MSG_PANEL_ITEM> cover type.
2021-09-27 00:23:40 +01:00
Jon Evans
a2ad204f4b
Fix off-by-one in AssembleTuningPath
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9003
2021-09-22 20:25:22 -04:00
Seth Hillbrand
be799b49a8
Fix equality in dp matching
...
A single count is found when dp ends with matching char. .Right(0) will
return an empty wxString() which is still valid
Fixes https://gitlab.com/kicad/code/kicad/issues/9206
2021-09-21 19:47:15 -07:00
Jon Evans
cf53b053a1
Improve handling of dragging around locked segments
...
Locked segments now are not modified if they weren't the start item.
If a locked segment is the start item, it is automatically unlocked.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9145
2021-09-21 22:38:53 -04:00
Seth Hillbrand
22a29a42cf
Generalize net DP matching
...
The requirement of 1-2 numbers following P/N or +/- was arbitrary and
not needed. We also add the _ to allowable suffixes to permit DP
matching of auto-renamed nets
2021-09-20 15:30:47 -07:00
Roberto Fernandez Bautista
dc1fd3d9ba
PNS test app: Add logging information for curved track routing
2021-09-20 20:35:24 +01:00
Jon Evans
4d478d6f17
Fix ordering of initialization in length tuner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9161
2021-09-14 07:48:02 -04:00
Jeff Young
fdfecf5932
Don't push view control settings to the previous active tool.
...
See further comments in bug report.
Fixes https://gitlab.com/kicad/code/kicad/issues/9147
2021-09-13 13:28:05 +01:00
Seth Hillbrand
092cdc0bb5
Move 45° limit to hotkey
...
This assigns the "Tab" key to a general pcbnew 45° limitation. Limit
can be enabled/disabled using context menu as well.
Removed the user preference for 45° limitation on graphic lines as that
is overlapping with the general limitation, which is not an editing
preference so much as a temporary adjustment to tool action.
Related to https://gitlab.com/kicad/code/kicad/-/issues/8490
2021-09-05 13:42:51 -07:00
Tomasz Wlostowski
a03b6f6fc9
router: use tail start point when saving the FIXED_TAIL
...
fixes: https://gitlab.com/kicad/code/kicad/-/issues/8771
2021-08-25 00:36:34 +02:00
Roberto Fernandez Bautista
4c17b7ab46
WALKAROUND::Route Check if path is empty before stepping
...
singleStep expects a path with at least one point.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9020
2021-08-24 20:17:19 +01:00
Jon Evans
09ea630d8e
Don't log a potentially invalidated item
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9006
2021-08-21 12:24:41 -04:00
Roberto Fernandez Bautista
aa67abb681
PNS::NODE Use PointCount instead of calculating segment index manually
...
There is no need to manually calculate the segment index - we know
that the last point that was added is the start point of the segment.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8945
2021-08-13 19:09:33 +01:00
Roberto Fernandez Bautista
0120c5fa4b
PNS Length Tuning: Recover original arc tracks after tuning
2021-08-09 21:10:33 +01:00
Jon Evans
e91218b876
PNS: don't mark holes only if there's also a solid violation
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8874
2021-08-08 15:41:39 -04:00
jean-pierre charras
fa82fcb809
Router tool: ensure a internal layer exists when placing a microvia.
...
Fix also a minor compil warning.
Fixes #8931
https://gitlab.com/kicad/code/kicad/issues/8931
2021-08-07 20:29:49 +02:00
Jeff Young
c51b1dad72
Generalize infobar MESSAGE_TYPE handling and use for DRC errors.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8782
2021-08-01 21:51:39 +01:00
Jeff Young
f221220fe2
Rename layer ids file.
...
It hasn't had anything to do with colors or visibility for some time
now.
2021-07-29 16:03:25 +01:00
Wayne Stambaugh
78e5e98ea0
Pass VECTOR2I objects by reference instead of on the stack.
2021-07-27 08:41:27 -04:00
Jeff Young
0fb864d596
Pull some name changes back from 7.0 to ease merging.
2021-07-21 20:58:59 +01:00
Wayne Stambaugh
cf00319c85
More NULL expunging.
2021-07-20 07:27:18 -04:00
Jon Evans
e61b1f03b8
PNS: Discard duplicate tracks in FixRoute
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8737
2021-07-13 21:13:40 -04:00
Seth Hillbrand
ff2e470a6e
Remove virtual items from clearance calculations
...
Extends 3ea970f8c9
to ensure that virtual items do not interfere with
DRC calculations while routing
Fixes https://gitlab.com/kicad/code/kicad/issues/8788
2021-07-13 16:10:36 -07:00
Seth Hillbrand
3ea970f8c9
Don't add virtual items to the display
...
By definition virtual vias should only exist in the backend, not
affecting users
Fixes https://gitlab.com/kicad/code/kicad/issues/8788
2021-07-13 15:52:41 -07:00
luz paz
0446d35f0d
Fix source comment/doc typos (follow-up)
...
Found via `codespell -q 3 -S *.po,./thirdparty -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,dout,einstance,modul,ot,overide,serie,te,,tesselate,tesselator,tht`
2021-07-13 10:48:17 +00:00
Jeff Young
2bd735b631
A little more safety in setting the router idle mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8765
2021-07-09 10:26:12 +01:00
Jon Evans
00f1b609c4
PNS: Don't run fanout cleanup when manually forced
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8724
2021-07-08 19:56:42 -04:00
Wayne Stambaugh
65c7958293
Coverity issue fixes.
...
Issues #331869 , #331875 , #332203 , #332159 , #332171 , #332180 , and #332648 .
2021-07-08 08:33:08 -04:00
Jon Evans
edc2be9018
Update width status when user choice changes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8265
2021-07-07 21:26:21 -04:00
Roberto Fernandez Bautista
4207165c26
Fix PNS deleting too many segments
...
Don't exit the loop pre-emptively. Need to update lastLink.
2021-07-07 19:54:19 +01:00
Roberto Fernandez Bautista
cda26bd57b
SHAPE_LINE_CHAIN::NextShape instead of explicitly calculating indices
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8738
2021-07-07 19:46:47 +01:00
Roberto Fernandez Bautista
81fa40d659
Code style: Fix missing space
2021-07-05 20:39:42 +01:00
Roberto Fernandez Bautista
04ff8cde5e
Drag & Fillet Tracks: Ignore mouse up / click events until move / drag
...
Ensures that any click/mouse up events generated after clicking "OK"
in the "Override locks" dialog are ignored.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8123
2021-07-05 20:29:25 +01:00
Jon Evans
e0146f73b9
PNS: Pick up complete lines between pads when dragging components
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7614
2021-07-03 20:00:54 -04:00
Jon Evans
91ea4a0569
PNS: Pick up segments directly between pads when dragging components
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7601
2021-07-03 19:50:04 -04:00
Roberto Fernandez Bautista
3f73d8c2b5
SHAPE_LINE_CHAIN::Area() should always be positive
...
The algorithm relied on the assumption that the points were
ordered anti-clockwise. When ordered in a clockwise fashion, the
result was correct but negative.
Refer to https://www.mathopenref.com/coordpolygonarea2.html
for more information.
2021-07-03 19:37:50 +00:00
Roberto Fernandez Bautista
c3051ba48a
Refactor SHAPE_LINE_CHAIN to allow two shapes per point
...
m_shapes now has two possible indices. The first one is populated if
the point is associated with an arc and the second index is populated
if the point is shared between two arcs.
2021-07-03 19:37:50 +00:00
Jon Evans
252bf76452
Fix off-by-one in AssembleTuningPath
2021-07-03 14:37:52 -04:00
Jon Evans
3c59e452d6
PNS: Set tuned path correctly in skew tuner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8708
2021-07-03 14:06:30 -04:00
Jon Evans
277bf2b719
Add feedback showing current router state to the message panel
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8265
2021-07-03 13:21:51 -04:00
Jeff Young
400f4ae506
Code cleanup.
2021-07-02 15:54:26 +01:00
Jeff Young
780a8a5154
Fix another place disallowing internal microvias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8716
2021-07-02 15:54:26 +01:00
jean-pierre charras
740b028180
pns_line_placer: do not constraint the 45deg of current segment in free angle mode.
...
Fixes #8691
https://gitlab.com/kicad/code/kicad/issues/8691
2021-07-01 16:38:31 +02:00
Roberto Fernandez Bautista
04b71f5167
Meander minimum spacing can be equal to track width + minimum clearance
...
2x track width was too constraining in some scenarios
Also better wording "Min Spacing" to indicate to the user that
the actual spacing could be larger if there are any constraints.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8172
2021-06-29 19:30:01 +01:00
Roberto Fernandez Bautista
e402563087
Don't recalculate meander spacing. Use constrained value instead.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1776
2021-06-29 19:30:01 +01:00
Jeff Young
c159500101
Remove nags and make Sel Layer and add via commands uniform.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8686
2021-06-28 19:17:01 +01:00
Jeff Young
0dfb5fcaf9
Error message cleanup.
...
wxString::Format is redundant in a wxLogXXX call.
Error messages should generally be translatable.
Error messages should use generally consistent sentence forms.
2021-06-26 22:53:24 +01:00
Jon Evans
a7eb611744
Fix leftover vias in shove mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8597
2021-06-23 22:13:35 -04:00
Jeff Young
c6606a0582
Hook up delete to undo last segment when routing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8362
2021-06-19 11:37:20 +01:00
Jeff Young
096e342386
Prefix TRACK, ARC and VIA.
2021-06-11 22:07:02 +01:00
luz paz
f968fc8719
Fix source comment / documentation typos
2021-06-09 19:32:58 +00:00
Marek Roszko
d946d6e68f
Cleanup some pgm_base.h includes
2021-06-08 21:56:00 -04:00
Marek Roszko
6e01ce84b9
Break out eda_item_flags.h, fix the typedef to std::uint32_t, fix some signed vars
2021-06-08 19:12:30 -04:00
Jon Evans
75ce97e260
Fix the last cause of duplicate segments when completing a route
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6863
2021-06-07 20:34:09 -04:00
Seth Hillbrand
d4edc70f65
Remove magic numbers where possible
...
Constant scales will be pre-calculated during compilation, so we can
leave the actual formula in place without penalty
2021-06-07 13:56:31 -07:00
Jon Evans
49c5130123
PNS: Implement final cleanup pass for redundant colinear segs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6863
2021-06-06 21:52:35 -04:00
Jon Evans
3c6b98a0d5
PNS: preserve auto-detected track width when changing via sizes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8046
2021-06-06 20:18:09 -04:00
Jon Evans
99710aba48
PNS: use slightly less greedy algo to reset the mouse trail
2021-06-06 19:47:52 -04:00
Jon Evans
6cb8154ec0
PNS: Remove code that broke width changes during placement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8334
2021-06-06 19:21:52 -04:00
Jon Evans
6789dac20b
PNS: Keep most recent good placement around for a rainy day
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8562
2021-06-06 18:56:33 -04:00
Jon Evans
c9bc45f7ed
PNS: Limit the maximum walkaround distance factor
...
The constant chosen is somewhat arbitrary and may need
further tuning or a more complex algorithm, but in general
this will prevent churning when solutions can't be found or
a solution can be found but it is unrealistic (going around
the entire board)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8558
2021-06-06 16:03:03 -04:00
Jon Evans
d32b9c1c25
Use debug group for line placer debug
2021-06-06 15:44:53 -04:00
Jon Evans
f5185f6927
Revert part of the anti-churn change, it causes bad side-effects
...
Further performance tuning could be useful but the part that
remains helps the most when hugging in large designs
2021-06-06 15:44:53 -04:00
Marek Roszko
8377ebb0e1
Fix msvc warnings
2021-06-06 15:30:31 -04:00
Marek Roszko
10e60acf34
Clean up including of board_design_settings.h
2021-06-06 15:03:42 -04:00
Jon Evans
5349f47f95
PNS: Prevent walkaround churn in unsolvable situations
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8558
2021-06-06 14:57:52 -04:00
Jon Evans
3475d0cebd
PNS: Grab start item based on clearance if no direct hits found
...
Fixes annoying "routing start point violates DRC" messages when
entering the router from the hotkey and not directly over a track.
2021-06-06 14:57:52 -04:00
Jon Evans
17da050e69
Improve walkaround results when last point is inside the hull
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8563
2021-06-06 12:55:32 -04:00
Jon Evans
be61bf29dd
Use more accurate hull shapes for round solids
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8561
2021-06-06 09:53:51 -04:00
Marek Roszko
b610b905fc
Cleanup track.h includes
2021-06-06 09:06:55 -04:00
Jon Evans
3b7480c1c1
PNS: Invalidate start/end items after finishing a route
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8555
2021-06-06 08:52:39 -04:00
Tomasz Wlostowski
ab04e24f9a
router: rhMarkObstacles should return a correct error status
...
Long story short: a few days ago I fixed error handling in routeStep(), so it actually started to recognize the wrong error status returned
by rhMarkObstacles() and think that the trace is always incorrect.
fixes: https://gitlab.com/kicad/code/kicad/-/issues/8557
2021-06-04 23:58:56 +02:00
Jeff Young
00791e1e37
Fix compile issues on clangd.
2021-06-03 23:41:06 +01:00
Marek Roszko
1c1ba25ffd
Use char_str instead of c_str in previous commit
2021-06-03 18:13:35 -04:00
Marek Roszko
daf510344f
Fix build error due to pns changes
2021-06-03 18:05:48 -04:00
Tomasz Wlostowski
63fc7a1908
router: support for drag/walkaround/shove for joints between lines of different widths.
...
fixes: https://gitlab.com/kicad/code/kicad/-/issues/1773
2021-06-03 22:44:53 +02:00
Tomasz Wlostowski
af26eab5fb
router: even more debug in SHOVE
2021-06-03 22:44:53 +02:00
Tomasz Wlostowski
a744857267
router: fix array out-of-bound error in HullIntersection()
...
fixes: https://gitlab.com/kicad/code/kicad/-/issues/8538
2021-06-03 22:44:53 +02:00
Tomasz Wlostowski
3e98c44636
router: LOGGER now stores UUIDs, not pointers to BOARD_ITEMs.
...
Caused occasional crashes when saving the debug event log, as some of the BOARD_ITEMS could have been deleted before SaveLog call.
2021-06-03 22:44:53 +02:00
Tomasz Wlostowski
e5e588ebba
router: temporarily export LINE::Walkaround() debug global variables
2021-06-03 22:44:53 +02:00
Tomasz Wlostowski
70ed5c1ae8
router: introduce concept of 'virtual' vias as a base for shoving/dragging joints of lines of different widths.
2021-06-03 22:44:53 +02:00
Ian McInerney
4f05262705
Cleanup includes in board.h and footprint.h
2021-06-03 20:19:52 +01:00
Marek Roszko
4df3cb912d
Remove another leaky wx/log.h header
2021-06-03 08:11:15 -04:00
Marek Roszko
cf2bb5692a
Remove the wxLog calls from math/util.h for now
...
This was leaking windows headers and partial wx headers to 1084 compilation units......
This also means math/util.h is leaking to 1084 compilation units which seems a bit high too.
2021-06-01 18:44:22 -04:00
Jon Evans
247da631f9
Revert "Fix typo and clean up leftover tracks"
...
This reverts commit ed66c0f14d
.
Revert "Clean up co-linear tracks after finishing routing"
This reverts commit 1a102f03c0
.
More complex solution needed
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8526
2021-06-01 11:18:00 -04:00
Jon Evans
1a102f03c0
Clean up co-linear tracks after finishing routing
...
This involved adding some extra infrastructure to be able
to handle the case where a track that is sitting in the
router's commit waiting to be added to the board actually
needs to be deleted instead.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8419
2021-05-31 17:36:38 -04:00
Marek Roszko
382dca4e6f
Fix uninitialized member warnings
...
Based on PVS Studio report
2021-05-30 20:01:01 -04:00
Tomasz Wlostowski
67f0bbc6d7
router: fixed crash in HullIntersection() when the path has 0 or 1 points.
...
fixes: 8515
2021-05-31 00:20:32 +02:00
Tomasz Wlostowski
614787caae
router: clear head line geometry if current head routing failed + small improvement to follow-mouse optimization.
...
Also added a lot of verbosity for the pns-log-viewer tool.
Fixes: 8511
2021-05-31 00:18:42 +02:00
Tomasz Wlostowski
dfd80e077c
router: fix another corner case in LINE::Walkaround() (duplicated vertex triggered by feeding a closed loop as the input path)
...
fixes: 1775
2021-05-31 00:17:12 +02:00
Jon Evans
0da85ded2f
PNS: Fix diff pair handling of microvias as start items
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8514
2021-05-30 15:51:28 -04:00
Tomasz Wlostowski
fcb89b99a3
router: walkaround algo should not copy the previous via position when the current iteration via placement fails.
...
fixes: 7827
2021-05-30 00:35:58 +02:00
Tomasz Wlostowski
af2e163890
router: annotate source locations of WALKAROUND debug items
2021-05-30 00:35:54 +02:00
Jon Evans
3eb5a484e1
PNS: Don't clip tuning paths to pads on other layers
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8504
2021-05-29 15:52:44 -04:00
Jon Evans
28f17c3ae6
PNS: Prevent wrong clearance being cached for new diff pairs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8377
2021-05-29 13:31:17 -04:00
Jon Evans
85ca85652d
Do not add debug items to view if debug flag isn't enabled
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8510
2021-05-29 12:40:24 -04:00
Jon Evans
bd59da3642
PNS: Local min distance has a minimum points requirement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8510
2021-05-29 12:40:24 -04:00
Tomasz Wlostowski
ebd957b08e
router: rework router's debugging infrastructure to be more compatibile with the 'qa/pns/pns-log-viewer' tool.
...
The log viewer tool lets you inspect all the intermediate stages of the routing algorithms. This patch:
- Adds source location tracking of the debug calls (need to use the PNS_DBG macro, sorry)
- Moves some wxLogTrace calls to DEBUG_DECORATOR::Message() so that messages can be displayed alongside the corresponding geometric shapes
2021-05-29 00:13:24 +02:00
Tomasz Wlostowski
132eb53a40
router: clean some debug clutter
2021-05-29 00:13:24 +02:00
Tomasz Wlostowski
b3caa3c4d4
router: fix ordering of colliding hulls in NODE::NearestObstacle()
...
Replaced the generic SHAPE_LINE_CHAIN::Intersect() with PNS::HullIntersection() which correctly rejects
'non-penetrating' intersections.
2021-05-29 00:13:24 +02:00
Tomasz Wlostowski
e66bbfd1ec
router: improve the feel of the walkaround algorithm
...
Makes walkaround more 'huggy' - the trace being routed sticks to obstacles
instead of jumping around in uncontrollable way.
2021-05-29 00:13:24 +02:00
Tomasz Wlostowski
8148b5d81f
router: improvements in LINE::Walkaround()
...
- Fix walk failure if the input path starts on the hull boundary
(happens very often during tight walkaround)
- Input line can have a loop at the end now. Such condition happens when the routing
destination point lies inside the hull of a colliding primitive.
2021-05-29 00:13:24 +02:00
Tomasz Wlostowski
d2ec3fc4ed
router: P&S-specific hull/line interection function that correctly rejects segments/vertices that only touch the hull polygons without penetrating them
2021-05-29 00:13:24 +02:00
Tomasz Wlostowski
8c4361bbc6
router: adapt to new SHAPE_LINE_CHAIN::INTERSECTIONS structure
2021-05-29 00:13:24 +02:00
Jeff Young
5c9a73aa5e
Correct position for grid even when we're not snapping to a point.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8125
2021-05-25 21:57:19 +01:00
Jeff Young
4c69a74505
Force layers visible when routing on them.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8432
2021-05-16 11:18:31 +01:00
david-beinder
75f49ba1b6
Add length tuner settings to toolbar context menu
2021-05-12 02:34:52 +00:00
Jon Evans
bc6b9b527a
Allow stackup height to be excluded from length calculations
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8384
2021-05-10 22:11:58 -04:00
Jeff Young
7356f9568d
Move grid disable modifier from ALT to CTRL.
...
Also had to move the H/V/45 disable modifier from CTRL to SHIFT.
Fixes https://gitlab.com/kicad/code/kicad/issues/8124
2021-05-09 20:17:40 +01:00
Jon Evans
1a45d9474b
Don't show commands that cancel routing when routing is in progress
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8363
2021-05-08 14:55:02 -04:00
Marek Roszko
03cf2b517f
Enum class PAD_ATTR_T
...
Renamed such that python stays the same
2021-05-01 10:51:54 -04:00
Marek Roszko
e20562b09b
Some cleanup
2021-05-01 10:37:20 -04:00
Marek Roszko
21fde9b629
enum class PCB_SHAPE_TYPE_T
2021-04-30 22:36:12 -04:00
Tomasz Wlostowski
a433451bd8
router: 'root line' tracking in the SHOVE algorithm. See comments for detailed explanation.
2021-04-27 14:13:16 +02:00
Tomasz Wlostowski
3a8744d054
router: introduce concept of a root lines in the OPTIMIZER.
...
By 'root lines' we mean the oldest traceable ancestor of each track moved by the router
(i.e. after shoving for a while, the root of each shoved line is it's latest non-shoved version).
With this we can teach the OPTIMIZER more tricks, such as the LIMIT_CORNER_COUNT constraint. It ensures
the results of the optimization will not be less cornery than the original line, reducing the feeling
of the optimizer being too intrusive.
2021-04-27 14:13:16 +02:00
Tomasz Wlostowski
76f8861e6e
router: revert Seth's arc adjustment in StartDragging().
...
Fixes picking the last segment instead of the last vertex to drag (when one is requested).
I didn't notice any behaviour change of the dragger wrs to arcs.
2021-04-27 14:13:16 +02:00
jean-pierre charras
e27733587d
Fix 2 minor Coverity warnings.
2021-04-23 19:57:36 +02:00
Jonathan Haas
075bd788eb
Remove unused OBSTACLE_VISITOR::m_extraClearance
2021-04-23 01:53:09 +00:00
Ian McInerney
ecd9bf696e
Be consistent about using nullptr instead of 0
...
0 can be too easily overloaded into an int, so ensure we use nullptr
when we mean pointers.
2021-04-22 22:20:34 +01:00
Jon Evans
cf47d665ea
PNS: Dragged line needs to retain width
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8246
2021-04-22 09:04:41 -04:00
Jon Evans
9b1890606d
PNS: Do not allow resolved optimal values to go below board minimums
2021-04-21 22:43:26 -04:00
Jon Evans
cbd7d698a9
Fix diff pair error message suffix suggestions
...
We accept diff pairs that end in N/P, no underscore required
2021-04-20 21:08:34 -04:00
Jon Evans
2535daf661
PNS: Account for via stack height in diff pair length tuner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8256
2021-04-20 19:31:10 -04:00
Jon Evans
dd828bd964
PNS: Bring back original Highlight Collisions behavior
...
From discussion with Tom, Jeff, and Wayne, it appears as though
we all agreed that Highlight Collisions should behave like it
did in 5.1, which is to say, always just highlight collisions,
never prevent them. The Allow DRC Violations checkbox just
controls whether or not you can fix/commit the head line if it
has violations; you are not prevented from moving the head
line to violating positions in any case.
Right now, there does not seem to be much demand for a separate
"Stop at First Obstacle" mode since Walkaround basically does that
but better, but we agreed that if there is demand for it in the
future, it should be implemented as a new router mode rather than
a behavior of Highlight Collisions mode controlled by the Allow
DRC Violations checkbox.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7828
2021-04-18 21:01:07 -04:00
Tomasz Wlostowski
4538d78828
router: fix via shoving regression.
2021-04-19 00:43:30 +02:00
Tomasz Wlostowski
57de83897a
router: VIA SetDrill() and SetPosition() must update the hole shape too.
2021-04-19 00:43:15 +02:00
Jon Evans
ec6995697d
PNS: even more free performance
...
If this doesn't work, we have bigger problems
2021-04-18 09:50:06 -04:00
Jon Evans
6425ad4118
PNS: Fix propagateDpHeadForces obstacle calculation
...
Using a synthetic via here doesn't quite let us use VIA::PushoutForce
because it will use the wrong clearance, and also doesn't quite have
the logic we want. I am not familiar enough with PushoutForce to know
if its logic is a bug in other cases, so instead I just brought in the
parts of its algorithm that are needed here.
Additionally, we prevent pushing more than once from a given obstacle,
which causes walkaround to be more successful when routing diff pairs
against a large collider such as a keepout area.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8232
2021-04-17 22:37:30 -04:00
Jon Evans
5974446523
PNS: Let's make the r-tree work for us
...
I'm not sure where the magic number of "4x worst" came from, but it's
been around forever. This is extremely inefficient as it negates much
of the power of r-tree filtering in dense designs. If we really trusted
it, we could set this just to worstClearance. Keeping it above the worst
clearance by a little bit seems to provide enough of a speed improvement
to resolve the test cases I have, so I'll go with that for now.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7777
2021-04-17 21:37:11 -04:00
Jon Evans
1d7e5a0443
Fix merge error that prevented a previous change from working
2021-04-14 23:30:16 -04:00
Jon Evans
268d570941
PNS: keep last valid diff pair trace as current state
...
This allows fixing/committing what is on screen even if the current
cursor position doesn't have a valid solution (the old behavior
would result in the current trace disappearing)
2021-04-14 23:21:10 -04:00
Jon Evans
c829dba88e
PNS: Reduce minimum distance to start turn in diff pair placer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8193
2021-04-14 23:21:10 -04:00
Jon Evans
cac4d70154
PNS: Respect fix-all in diff pair placer
2021-04-14 23:21:10 -04:00
Jon Evans
296a9df530
PNS: Pick up diff pair starting width from continuation track
2021-04-12 23:10:15 -04:00
Jon Evans
1d9ca181a2
PNS: Use existing seg direction if both DP segs are parallel
2021-04-12 22:34:13 -04:00
Jon Evans
311cde0984
Safety check suggested by Coverity
2021-04-12 20:42:50 -04:00
Jon Evans
2aa5e568e8
Refactoring
2021-04-12 20:40:05 -04:00
Jon Evans
73fb85a352
PNS: Calculate diff pair primitive orientation using anchors only
...
The previous method fails if the primitive is an expanding or
contracting pair (diagonals going inward or outward) resulting in
incorrect orientation, which then leads to incorrect candidate
gateways being generated and no solution found.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8185
2021-04-12 20:34:44 -04:00
Jon Evans
715c61ac9f
PNS: Fix yet more arc edge cases
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8150
2021-04-12 19:59:55 -04:00
Jon Evans
49a91414d7
PNS: Apply co-linear seg merging to drag operations
2021-04-11 22:32:11 -04:00
Jon Evans
1c431d9929
PNS: Fix some off-by-one errors with arc dragging
2021-04-11 22:12:53 -04:00
Jon Evans
a26fc6d65d
PNS: Fix several issues with arc dragging
...
Do not merge vertices that belong to different arcs
Fix start segment identification after arcs
Fix free-angle drag after arc
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8173
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8150
2021-04-11 17:56:40 -04:00
Jon Evans
7ba110bd77
PNS: Fix dragging of segments with arcs in line
2021-04-11 10:18:57 -04:00
Thomas Pointhuber
a30894e5a1
Allow SHAPE_LINE_CHAIN and SHAPE_ARC to be mirrored using a SEG
2021-04-11 13:27:25 +00:00
Thomas Pointhuber
fe8fbf1d5d
Use arcs instead of line approximation for Miter shape
...
TODO:
* The resulting line chain is broken with the arcs, and
this appears to be some subsequent issue I was not able to pin down.
* The requirement of a correction factor is not clear to me
2021-04-11 13:27:25 +00:00
Jon Evans
5c448057c8
PNS: Prevent state flicker when starting drag
2021-04-10 16:31:39 -04:00
Jon Evans
7784d7cb12
PNS: Fix visible area restriction
...
VIEW::GetBoundary() returns the entire view area, not the visible area.
Surprisingly, we had no API for this, so I added one.
Also, changed the dragger behavior to toggle between optimizing just the
modified area and optimizing the visible area, i.e. we will now never
optimize off-screen portions of the dragged track.
2021-04-10 16:13:08 -04:00
Jon Evans
94afdcb92a
PNS: Allow control of area-restricted drag optimization
...
CHANGED: The interactive router settings now include a switch to
enable or disable optimization of the entire dragged track,
which is now disabled by default. When enabled, the router
will reroute the entire track (from the dragged segment to
the closest pad/via in each direction) to be more optimal.
When disabled, only the area around the dragged segment
will be modified.
CHANGED: The "optimizer effort" slider is removed from the interactive
router settings dialog, as this setting did not have any
meaningful impact in most cases and was a source of confusion.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5918
2021-04-10 15:17:39 -04:00
Jeff Young
dc0cf3b802
Clean up a confusing API.
...
AllowDRCViolations is kept in any mode as a *setting*, but only
controls router behaviour when the mode is mark obstacles.
Fixes https://gitlab.com/kicad/code/kicad/issues/7795
2021-04-10 11:08:02 +01:00
Jon Evans
d878cbddbc
PNS: a few forgotten cleanup items
2021-04-07 23:34:45 -04:00
Jon Evans
c9040a5c53
PNS: fix some weirdness identified by PVS
2021-04-07 23:16:56 -04:00
Jon Evans
d4957b112e
PNS: Keep last valid drag solution in the node
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5450
2021-04-07 21:59:23 -04:00
Jon Evans
26835f582c
Some situations require more than one dummy
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7820
2021-04-07 21:30:18 -04:00
Jon Evans
9432484394
PNS: Find origin segment correctly when arcs are present
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8139
2021-04-07 20:28:30 -04:00
Jon Evans
9f957d3e08
Fix crash when attempting to tune discontinuous lines
...
Also correctly find the tuning path through arcs
https://gitlab.com/kicad/code/kicad/-/issues/8131
2021-04-06 09:07:11 -04:00
david-beinder
b2f788adc1
PNS: Fix UseConnectedTrackWidth when starting from ARCs
2021-04-06 01:27:13 +00:00
Jon Evans
e46c9d35ac
Add undo/redo handling to length tuner event loop
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8129
2021-04-05 19:58:14 -04:00
Jon Evans
24cd174a23
Don't dereference a possibly-invalid optional
2021-04-05 19:34:57 -04:00
Jon Evans
a6c3d74a73
Pass active layer to StartRouting in length tuner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7857
2021-04-04 21:51:54 -04:00
Jon Evans
a24bc34b66
Better colors for length tuning popup in dark mode
2021-04-04 20:33:59 -04:00
Jon Evans
c7ecb51f77
Update PNS length tuning algorithm to match the new BOARD algorithm
...
Now tracks inside pads are optimized to give a more accurate length.
Also, the start/end of the assembled line is used to identify the right
pad joints for pad-to-die length calculation.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4204
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1765
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6877
2021-04-04 20:27:22 -04:00
Jon Evans
cdfb014ab6
CHANGED: Account for via height in track length calculations
2021-04-04 13:59:18 -04:00
Jon Evans
6b24abac8f
PNS: Don't snap to end items if snapping is disabled by modifier key
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8033
2021-04-04 10:22:23 -04:00
Jon Evans
a8896ebd73
Don't show leading ratline for unconnected net
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8040
2021-04-02 20:29:25 -04:00
Jeff Young
f88d39b4f0
Fix state issue in router's switch layer handling.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7590
2021-04-01 18:10:04 +01:00
Jeff Young
8cb6f15687
Warn when diff pair router can't start due to too-small-gap.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7795
2021-03-30 19:49:23 +01:00
Jon Evans
78a60e9dfb
PNS: Put polygon error outside pad shapes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7672
2021-03-29 19:49:59 -04:00
Jon Evans
6cbc3fb97d
Fix a minor inconsistency between router and DRC
...
Also make sure collision highlighting runs at the starting
location of a drag.
See: https://gitlab.com/kicad/code/kicad/-/issues/7672
2021-03-29 19:41:17 -04:00
Jon Evans
8be9832153
PNS: Don't highlight Net 0 (the unconnected net)
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8040
2021-03-29 17:45:07 -04:00
Jon Evans
132ec37b56
Handle arc in buildHullForPrimitiveShape
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8008
2021-03-25 21:25:30 -04:00
Jeff Young
8be213e36f
Trim includes (and use consistent terminology in error messages).
2021-03-21 20:15:47 +00:00
Jon Evans
5e0b65c3a8
Change wording of corner rounding action
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4505
2021-03-21 15:55:56 -04:00
Jeff Young
cad1cb0262
Improve naming.
2021-03-16 12:07:06 +00:00
Jon Evans
18037e2f65
Rework bitmap system to load from archived PNGs
...
Bitmaps are now identified by an enum class instead of by pointers.
Bitmap loading and caching is now handled by a class in common, and
we no longer compile most bitmaps into the binary, so there is no
longer a bitmaps static library.
Instead, bitmaps are archived to a .tar.gz file which is installed
in ${KICAD_DATA}/resources/images.tar.gz
The source PNGs are checked in to Git as the original CPP files were,
so that people can build without the required dependencies to convert
SVGs to PNGs.
Initial support is also added for dark theme icons, although this
is not yet exposed in the GUI.
Stubs are present for multi-resolution image resources, but this is
not fully-baked yet and could use some refinement.
2021-03-11 08:37:35 -05:00
Jon Evans
720147d272
Remove transitive inclusion of bitmaps.h
2021-03-07 16:08:57 -05:00
david-beinder
df99ee39d9
PNS: new through vias should span all copper layers
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7576
2021-03-07 17:58:43 +00:00
Wayne Stambaugh
79a9d69ff5
Coverity fixes for issues 314755, 316287, 324536, 324539, and 324539.
2021-03-02 08:10:37 -05:00
Jeff Young
d06e8ef01c
Honour pre-defined-size selections for diff pairs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7759
2021-03-02 12:12:05 +00:00
Jon Evans
d269778cd4
PNS: disable smart pads in walkaround if posture is forced
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7710
2021-02-27 13:48:01 -05:00
Jeff Young
b36e1c741d
Fix insidious bug which resets layer of SOLID when marking collision.
...
It's supposed to be setting the layer of the collsion display object,
not the host object, but there's a typo.
Fixes https://gitlab.com/kicad/code/kicad/issues/7712
2021-02-25 23:39:48 +00:00
Jeff Young
75032f3acd
Use the more-constrained layer when running rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7639
2021-02-25 22:58:07 +00:00
Tomasz Wlostowski
87ea540953
Fix whitespace errors
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
c79610e132
router: post-rebase fixes
2021-02-25 17:18:23 +01:00
Marek Roszko
6948cdd8ef
router: Fix return type within pointInside2
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
9bdfc13155
router: improve locality of post-shove optimization
...
Fixes : #4359
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
e1d4bb777c
router: use new LINE::Walkaround in the walkaround algo
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
045d02f818
router: add strict/loose area restriction constraint. WIP
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
24574aa2f5
router: first insert intersections, then build graph in Walkaround()
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
61e75a838b
router: replace large stack variables with std::array
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
028f209126
router: more robust LINE::Walkaround() implementation
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
e9c55cd0e3
router: if the drag anchor is not reachable by the mouse, use the closest point on dragged trace for optimizer restriction
...
Fixes : #4056
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
a141ed3444
router: feed view size change events to the router engine
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
12dfb541fc
router: expose current view area to the router algorithms so that the optimizer could know not to mess with traces/vias not currently visible to the user (wip)
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
2831c7d24c
router: fix compile error in DRAGGER
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
b67e5768a6
router: feature to save debug event log & board dump for easier recreation of router bugs and misbehaviours
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
ebdc68ac1d
router: correctly handle line width in PREVIEW_ITEMs
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
34c037684b
router: partially migrate SHOVE algorithm to use new DEBUG_DECORATOR
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
0e6cf3f56e
router: fix board edge clearance queries
...
Fixes : #7254
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
4574f52eac
router: DRAGGER::CurrentNode() should always return non-null value
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
e221b11e3b
GRID_HELPER: fixed arithmetic issue in segment snap distance check disguised as 'excessive optimization' by the dragger in the router
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
325300bd76
router: don't use compound pad shapes if pad contains a single primitive shape
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
a4bd2ad8c6
router: drag in walkaround mode now works
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
f84836f51e
router: factor out POSTURE_SOLVER to more generic MOUSE_TRAIL_TRACER class
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
af95235f47
router: report debug log events from DRAGGER
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
0306d16748
router: make post-drag optimization less intrusive
...
Fixes : #5918
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
14ce7a0ad7
router: implement area constraint in optimizer
2021-02-25 17:18:23 +01:00
Tomasz Wlostowski
64cf593ee9
router: debug points now have variable size
2021-02-25 17:18:23 +01:00
Jeff Young
caa18c8e16
Fix bugs in diffPair hole-to-hole logic and add rule resolution.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7697
2021-02-25 14:23:02 +00:00
Jeff Young
fa89263c8f
Push hole-to-hole min processing down a level.
...
Also removes adding the track width to the via gap, which was
never right.
Fixes https://gitlab.com/kicad/code/kicad/issues/7173
2021-02-24 21:42:00 +00:00
Jeff Young
7f892669cc
Consistent punctuation.
2021-02-23 12:46:27 +00:00
Marek Roszko
c12666ec43
Fix arg type of NODE::followLine
2021-02-20 11:58:55 -05:00
Marek Roszko
6fce39607e
Fix return type within pointInside2
2021-02-20 11:58:55 -05:00
jean-pierre charras
d0b91b1106
Router, place via: fix issue created by 45b2bc: cancelling via must be made
...
only when the select layer is called.
Fixes #7606
https://gitlab.com/kicad/code/kicad/issues/7606
2021-02-19 17:28:20 +01:00
Seth Hillbrand
54282dffe3
Move preview items using FP orientation
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7600
2021-02-18 16:32:40 -08:00
Jeff Young
45b2bce698
Cancel placement of via if user cancels layer selection.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7578
2021-02-18 11:53:36 +00:00
jean-pierre charras
5d2dc0b50e
Fix a few (minor) issues:
...
- Make DIALOG_SHIM::SetPosition working)
- rename PCB_BASE_FRAME::SelectLayer() to PCB_BASE_FRAME::SelectOneLayer()
- PCB_BASE_FRAME::SelectOneLayer(): make dismiss dialog by escape key working.
Fixes #7578
https://gitlab.com/kicad/code/kicad/issues/7578
2021-02-17 20:56:43 +01:00
Jon Evans
0198d5a3bd
PNS: don't lose track of pad offset when dragging footprints
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7500
2021-02-16 19:47:52 -05:00
Seth Hillbrand
9212197c26
Grammar
2021-02-15 15:18:13 -08:00
Jeff Young
e2f8b1a4b1
Interpreting wxDialog::ShowModal()'s retval as bool is never what you want.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7454
2021-02-08 17:40:57 +00:00
Jeff Young
6272b48481
Make sure layer gets passed in to rules evaluation.
2021-02-08 14:53:49 +00:00
Jeff Young
7aa7e3fd43
Push undo/redo blocking down a level in LengthTuner tool.
...
This way it's active only while tuning a single line, rather than
while the tool is selected.
Fixes https://gitlab.com/kicad/code/kicad/issues/7462
2021-02-08 14:15:46 +00:00
Seth Hillbrand
792904557e
Remember Parent data when routing
...
Keeps parent information such as UUID and pad removal options for
elements that are just updated in routing rather than created fresh or
fully destroyed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7460
2021-02-07 17:08:43 -08:00
Jon Evans
721bf82603
Handle malformed lines in dragCornerInternal
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7398
2021-02-03 20:55:22 -05:00
Jeff Young
d7ddc62d7e
Fix mouse warping and dialog placement for layer switcher.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2607
2021-02-02 17:20:01 +00:00
Marek Roszko
dc4b73fcef
Correct m_board check location in PNS_KICAD_IFACE_BASE::SyncWorld
2021-02-01 11:58:22 -05:00
Seth Hillbrand
73886aecb1
Ensure partially triangulated polys are not valid
...
Moves rule area triangulation outside of layer iterator and keeps the
triangulation_valid flag false until the triangulation has been
completed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7032
2021-01-29 16:33:57 -08:00
Wayne Stambaugh
6a39b81647
Fix the last of broken Doxygen comment specifiers.
2021-01-27 17:39:44 -05:00
Mikołaj Wielgus
3e42ba18a9
Show dragging tools in context selection menu for components
...
Show the dragging tools in the context selection menu when a single
component is selected. Prevent the dragging tools from appearing when
more than one object is selected, as they will not activate anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/7258
2021-01-27 19:55:42 +00:00
Jon Evans
b96bcc86b1
Don't restrict start item to same layer if snapping is enabled
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7276
2021-01-25 21:19:26 -05:00
Jeff Young
3fcd0860c1
Make 'E' go straight to Custom Track Width dialog.
...
Also fixes some mouse capture issues.
Fixes https://gitlab.com/kicad/code/kicad/issues/7198
2021-01-20 18:19:55 +00:00
Jon Evans
330d717c69
Fix typo
2021-01-18 21:50:26 -05:00
Ian McInerney
44655b98de
Initialize variables properly
2021-01-18 18:35:10 +00:00
Jeff Young
68efdb2fff
Push shared parts of GRID_HELPERs into common.
2021-01-16 23:18:10 +00:00
Jeff Young
02ccd5fbdb
Make sure properties commands don't go to other tools during routing.
...
Brings up the track widths (or diff pairs) context menu instead,
which seems to be the closest parallel.
Fixes https://gitlab.com/kicad/code/kicad/issues/7099
2021-01-14 15:19:09 +00:00
Dominik Wernberger
dc02ec9758
Remove a few const_cast
2021-01-12 20:51:31 +00:00
Jon Evans
111fa99f9f
PNS: Use last-segment posture optimization always
...
Also when auto-posture is enabled, don't flutter
until area threshold has been met.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
2021-01-07 20:12:31 -05:00
hoijui
6ca9a42251
Removes 3 other instances of a potential encoding problem
...
Signed-off-by: hoijui <hoijui.quaero@gmail.com>
2021-01-07 17:36:49 +00:00
Jeff Young
e41c06304b
Don't show a leading ratline to a NPTH.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6960
2021-01-07 12:25:04 +00:00
Jeff Young
f702b64b8d
Minor improvements to formatting & SNR.
2021-01-07 12:25:04 +00:00
Jon Evans
0234b7278a
PNS: Make DIRECTION_45 North be up everywhere
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
2021-01-06 21:47:06 -05:00
Jon Evans
46c4727783
Make MSVC happy again
2021-01-05 20:56:37 -05:00
Jon Evans
e7b047660c
PNS: Correctly assemble lines with reversed arcs
2021-01-05 17:57:21 -05:00
Jon Evans
feda03f69b
PNS: Fix arc orientation when assembling lines with backwards arcs
2021-01-05 17:57:21 -05:00
Jon Evans
7431d5c985
PNS: First pass at updating meander placers for arcs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6464
2021-01-05 17:57:21 -05:00
Jon Evans
8619086cf2
PNS: re-enable optimization of colinear segs in lines with arcs
2021-01-05 17:57:21 -05:00
Jon Evans
8901e71fc8
PNS: Fix loop removal, make walkaround less broken for arcs
2021-01-05 17:57:21 -05:00
Jeff Young
02cd8c99cd
Better error messages when routing can't be started.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6541
2021-01-05 18:47:58 +00:00
Jeff Young
88d42724e6
Remove diff-pair-gap handling from single-line-router.
...
We can't really support it until we do min/max/opt shoving and
dragging.
Fixes https://gitlab.com/kicad/code/kicad/issues/6932
2021-01-05 16:54:52 +00:00
Jeff Young
d975f2f6aa
Commenting and naming for clarity.
2021-01-05 16:54:52 +00:00
Jeff Young
f7b20611c1
Enforce hole-to-hole min when placing diffpair vias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6931
2021-01-05 00:26:49 +00:00
Jeff Young
93bd2171ab
Formatting.
2021-01-05 00:26:49 +00:00
Jeff Young
d24b034cbc
Cleanup (and a minor performance improvement).
2021-01-04 22:32:29 +00:00
Jeff Young
2ea6bc5529
Formatting.
2021-01-04 19:19:55 +00:00
Jeff Young
648c42f643
Show collisions preventing routing from starting.
...
Also introduces a callback to the infobar so that the view can be
cleaned up when the timer expires.
Fixes https://gitlab.com/kicad/code/kicad/issues/6930
2021-01-04 19:19:55 +00:00
Jeff Young
71215bcab3
Make sure TH pads get collision layer highlighted.
...
Also cleans it up to centralise all the decision-making.
Fixes https://gitlab.com/kicad/code/kicad/issues/6925
2021-01-03 21:16:09 +00:00
Jon Evans
f01297fedd
Convert an annoying message box to an infobar
2021-01-02 22:14:10 -05:00
Jeff Young
8b849b1c49
Fix several bugs in hull push-back with vias.
...
1) take hole plating thickness into account
2) build hulls specifically for via so pushing back to the hull doesn't
have to try and figure out how much extra to push back for the via
and/or hole
3) clear MK_HOLE flags when colliding with the pad itself so that we
don't get stuck in HOLE mode
4) move flag setting/clearing to updateNearest() so that it will keep
track of the state of the nearest collision
Fixes https://gitlab.com/kicad/code/kicad/issues/6913
2021-01-02 19:14:44 +00:00
Jeff Young
13094fdc28
Formatting.
2021-01-02 18:38:17 +00:00
Jeff Young
85e42890c4
Distinction between via and via hole probably not useful.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6913
2021-01-02 16:41:09 +00:00
Jeff Young
068af7d328
When routing don't give NPTH holes a copper clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6903
2021-01-02 16:33:51 +00:00
Jon Evans
eba7cb222c
PNS: Fix initial posture guess for pads
2021-01-02 10:32:15 -05:00
Jeff Young
6b6694f55f
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6913
2021-01-02 15:04:30 +00:00
Jeff Young
42c114f6ed
Record status of via dragging in Walkaround mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/3967
2021-01-02 00:31:02 +00:00
Jeff Young
8a049cf290
Make sure bounding boxes get cached on rule areas.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6898
2021-01-01 23:17:49 +00:00
Jeff Young
018c17399d
SNR.
2021-01-01 23:17:49 +00:00
Jeff Young
fc1b0ec11f
Improve feedback when routing in highlight collisions mode.
...
In particular, when Allow DRC violations is NOT turned on and we
bump in to an obstacle.
2021-01-01 17:25:37 +00:00
Jeff Young
3ba17e0a16
Formatting.
2021-01-01 01:02:06 +00:00
Jeff Young
ecc0e861d3
Implement hole clearance and hole-to-hole clearance in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6882
2021-01-01 00:31:36 +00:00
Jeff Young
5d8e6020d1
Improve clarity.
2021-01-01 00:31:36 +00:00
Jeff Young
0e3c9de684
Formatting.
2021-01-01 00:31:36 +00:00
Jeff Young
1b93663627
Formatting.
2021-01-01 00:31:36 +00:00
Jon Evans
9a0f685a75
PNS: Consider arcs when searching for lines between joints
2020-12-31 13:05:43 -05:00
Jon Evans
73248ab219
PNS: correct initial segment direction for posture solver
2020-12-31 13:05:43 -05:00
Jon Evans
60fd7fdbb2
Fix comment
2020-12-30 18:52:56 -05:00
Jon Evans
510db66f0e
PNS: Fix rollback for arc traces
...
PNS: Update posture solver after rollback
2020-12-30 18:23:24 -05:00
Jon Evans
6105ac50da
ADDED: Default hotkey of CTRL+/ for switch corner rounding
2020-12-30 18:23:24 -05:00
Jon Evans
b5b64a55ad
PNS: Only run optimization if lastNode is valid
2020-12-30 18:23:24 -05:00
Jon Evans
79502a0d88
PNS: A new approach to arc placement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6334
2020-12-30 18:23:24 -05:00
Jon Evans
bf9501e1d4
PNS: Fix auto-posture when placing via
2020-12-29 21:14:36 -05:00
Jon Evans
689da3794d
PNS: Merge co-linear segments during placement
2020-12-29 21:14:36 -05:00
Jon Evans
4c0aa6db1a
PNS: Disable smart pads optimization for vias
...
There is not much point with the current algorithm and it
breaks auto-posture.
2020-12-29 21:14:36 -05:00
Jon Evans
81d4e06f00
PNS: Consider pad orientation when routing
...
PNS: Skip smart pads when posture was manually forced
This allows a more-correct pad breakout to be chosen when
smart pads is off.
2020-12-29 01:06:46 -05:00
Jon Evans
96d49d1473
PNS: Improved auto-posture when starting from a segment
...
The previous auto-posture algorithm worked great for pads
but not so great when starting routing from a segment.
Now we can optimize the posture based on the starting
segment if one exists, to maximize the "obtuseness" of the
posture.
2020-12-28 23:51:13 -05:00
Jon Evans
3adff647a7
PNS: Preserve nearest vertex when dragging in shove mode
2020-12-28 19:44:39 -05:00
Jon Evans
be294dabce
PNS: Snap back to last valid point when committing a drag
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6651
2020-12-28 16:36:42 -05:00
Jon Evans
3c87e67753
PNS: Allow committing routes even when cursor moves beyond valid solution
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6651
2020-12-27 17:14:38 -05:00
Jon Evans
2cdf9875b9
PNS: fix off-by-one in dragCorner45
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6644
2020-12-27 15:58:36 -05:00
Jon Evans
c615b7a49b
PNS: make initial direction behavior consistent with fix-all enabled
2020-12-27 15:21:55 -05:00
Peter Montgomery
1c79e3174c
Pcbnew: Prevent footprint jumping when starting to drag it
...
CHANGED: When dragging a footprint, if the mouse isn't directly over the
footprint anchor when 'D' is pressed, the footprint center will jump to
the mouse position when dragging begins. This MR uses the current
mouse position instead of the footprint anchor as the inital reference
point when starting to drag.
Fixes https://gitlab.com/kicad/code/kicad/issues/6813
2020-12-27 17:43:52 +00:00
Jon Evans
8ad89ae457
PNS: fix manual posture mode
2020-12-24 17:31:54 -05:00
Jon Evans
8a2667c4c3
PNS: Fix all segments by default (and make optional)
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5920
2020-12-23 21:55:43 -05:00
Jon Evans
8c247fc97c
PNS: Add a setting to disable posture solver
...
PNS: Prevent autoposture flutter when trail has little area
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6797
2020-12-23 21:02:17 -05:00
Jon Evans
912657dd23
Component dragger: make relaxed segment pickup work for PTH pads
2020-12-22 22:43:44 -05:00
Jon Evans
70c6314c67
Component dragger: be more generous about picking up tracks
...
We now pick up tracks that end anywhere in the pad, not just
at the pad anchor.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5945
2020-12-22 22:28:24 -05:00
Jon Evans
70c397a9b4
Implement free vias fully
...
CHANGED: manually-placed (stitching) vias won't have their nets automatically updated
(unless the via is placed directly on a track segment)
CHANGED: stitching vias can be placed on footprint pads and pick up their nets
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5484
2020-12-20 16:29:50 -05:00
Jeff Young
cd162a8f58
Honour m_placingVia when avoiding collisions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/3773
2020-12-20 20:36:19 +00:00
Jon Evans
e8f38e3c18
Snap to footprint origin when dragging
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6633
2020-12-20 15:15:48 -05:00
Jon Evans
ac793618f9
Set start item for inline dragging so that snapping works properly
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6796
2020-12-20 11:13:09 -05:00
Jeff Young
46314f6483
Only compare collision-corrected routes when looking for shortest.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6511
2020-12-19 23:20:27 +00:00
Jeff Young
acfbcb4beb
Make distinction between PCBNew-wide tools and Board-specific tools.
...
The old names were really hard to keep straight (even for me, who named
many of them).
2020-12-16 13:32:46 +00:00
Jeff Young
5f9ed2583c
Don't put up double lock confirmation dialogs.
...
Also removes EditToolSelectionFilter which was misused in more places
than it was used correctly. The original point of the client filter
was to move the logic to the point of use, which the
EditToolSelectionFilter sort of obviated anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/6751
2020-12-15 22:34:24 +00:00
Jeff Young
c0a9742b3a
Apply 0ef63aca47
to diff pairs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6314
2020-12-12 03:43:41 +00:00
Wayne Stambaugh
dd4298bb94
Coverity fixes: 280374, 313611, 313648, 313649, and 314720.
2020-12-11 13:29:52 -05:00
Jeff Young
0ef63aca47
Don't reset tail when changing track width/via sizes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6314
2020-12-11 17:58:36 +00:00
Jeff Young
7cb2d19814
Honour alt-means-disable-grid-snapping in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6679
2020-12-11 13:11:47 +00:00
Jeff Young
d304f12284
Formatting.
2020-12-11 12:48:04 +00:00
Jeff Young
73b7b104cd
Fix some issues with Infobar sizing.
...
This also commits to the new strategy as it wasn't really compatible
with if-def-ing anymore.
2020-12-11 12:39:40 +00:00
Ian McInerney
be4b6ec06a
Cleanup compiler warnings
2020-12-09 23:13:33 +00:00
Jeff Young
b1f0bf7334
More consistent naming.
2020-12-08 13:05:39 +00:00
Jeff Young
aa3e29ee7c
Don't re-enter router on subsequent X key.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6656
Fixes https://gitlab.com/kicad/code/kicad/issues/4504
2020-12-08 00:13:29 +00:00
Jeff Young
f09ca9ceee
Pass unhandled events when dragging in the router tool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6630
2020-12-06 12:30:29 +00:00
Jeff Young
7b347d793b
Change gears on no-connect net generation. See bug rpt.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6534
Fixes https://gitlab.com/kicad/code/kicad/issues/6615
2020-12-04 18:25:48 +00:00
Jeff Young
00edc85f4f
Allow layer switching when routing from pad.
...
Additionally, don't process layer events from both main loop and
transitions -- it makes for a mess.
Fixes https://gitlab.com/kicad/code/kicad/issues/4832
2020-12-02 21:17:56 +00:00
Jeff Young
f2ac6fcd44
Treat net 0 items as each being in their own net.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6534
2020-12-02 20:05:47 +00:00
Jeff Young
d06d35a74d
Formatting.
2020-12-02 20:05:47 +00:00
Jeff Young
288ab7ed6f
Minor formatting cleanup.
2020-12-01 14:04:01 +00:00
Jeff Young
06b9439dbf
Edge Cuts shapes have zero width.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6517
2020-11-26 17:42:46 +00:00
Jeff Young
9c7c05c161
Mostly formatting cleanup but a few type-casting cleanups too.
2020-11-24 22:16:41 +00:00
jean-pierre charras
976c6262f4
French translation update (fix also trailing spaces in a few sentences)
2020-11-23 11:42:25 +01:00
qu1ck
b32c2a6c90
Refactor EDA_TEXT::TransformToSegmentList() to return a vector of points
...
This allows reading text object as it is rendered through python API.
2020-11-23 07:50:54 +00:00
Jeff Young
ff3bd7e72a
Fix a crash bug in DRC, and equate Margin to Edge.Cuts.
2020-11-20 21:22:27 +00:00
Jeff Young
9e9946628a
Go back to arrow cursor on a cancel (or finish).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6421
2020-11-19 20:09:28 +00:00
Dominik Wernberger
99da663e82
Remove unused variables plus some more fixes from CppCheck
...
Remove unused variables plus a few more fixes from CppCheck
Remove unused variables plus a few more fixes from CppCheck
2020-11-19 02:28:47 +00:00
Werni
0e44f5128c
Add const specifiers
2020-11-18 19:50:36 +00:00
Jeff Young
795e45836d
Fix assert in DRC.
2020-11-17 17:41:57 +00:00
Jeff Young
7bd31d5237
Naming conventions.
2020-11-14 18:26:03 +00:00
Jeff Young
ec020dd19f
First-class support for filled shapes.
2020-11-14 01:40:32 +00:00
Jeff Young
bdbb68f813
MODULE -> FOOTPRINT.
2020-11-13 16:04:03 +00:00
Jeff Young
3451ac3088
PCB_MODULE_T -> PCB_FOOTPRINT_T
2020-11-13 15:16:24 +00:00
Jeff Young
52a46341db
More module -> footprint.
2020-11-13 15:16:24 +00:00
Jeff Young
f5443de7f9
D_PAD -> PAD.
2020-11-13 15:16:24 +00:00
Jeff Young
84dd5108ba
Remove some "class_" prefixes from files.
2020-11-13 15:16:23 +00:00
Jeff Young
f7333ad64a
Update some classnames including archaic zone names.
2020-11-12 10:31:25 +00:00
Jeff Young
da5cfb5df1
Improve commenting.
2020-11-11 17:52:15 +00:00
Jeff Young
5e569e81e7
Performance enhancements for PNS.
2020-11-11 15:32:30 +00:00
Ian McInerney
d88eaaf477
Fix various compiler and Coverity warnings
2020-11-11 00:41:02 +00:00
Jeff Young
ce3b2921bd
Sort potential start candidates by distance from cursor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1926
2020-11-10 23:50:57 +00:00
Jeff Young
bd63c018c9
Don't snap synthetic priming event.
...
We need to let the consumer of the event do snapping (so that, for
instance, it can also snap to tracks, pads, etc.)
Fixes https://gitlab.com/kicad/code/kicad/issues/4365
2020-11-09 17:21:47 +00:00
Jeff Young
64876a2761
PNS_DRAGGER should report its layers.
...
Also, don't use ViewGetLayers() for visibility checking. For some
things (like vias) it deals with synthetic layers, not board layers.
Fixes https://gitlab.com/kicad/code/kicad/issues/6328
2020-11-08 17:19:37 +00:00
Jeff Young
81ea71fb80
More safety when fetching via sizes.
2020-11-07 18:50:30 +00:00
Jeff Young
ae9afdd169
SNR. (Mostly for progammers, but a little for user messages.)
2020-11-02 16:20:00 +00:00
Jeff Young
76ac8b5acf
Preflight routing so we can give a warning if it's not going to work.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4975
2020-11-02 00:10:21 +00:00
Jeff Young
8bfb255c96
Put a warning when routing can't start due to DRC violation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4975
2020-11-01 23:46:42 +00:00
Jeff Young
409cd9d4ee
Formatting.
2020-11-01 20:25:36 +00:00
Jeff Young
f6c92ab1ea
DRAGGER needs to report it's nets.
...
Otherwise things like snapping don't work.
Fixes https://gitlab.com/kicad/code/kicad/issues/4147
2020-11-01 19:57:42 +00:00
Jeff Young
a95e2184da
A more generic error message when route start pt violates DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1812
2020-11-01 18:23:07 +00:00
Jeff Young
2c1b6e42e0
Repair ARC copy constructor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6176
2020-11-01 00:10:08 +00:00
Jeff Young
fab87fb97b
Handle proxy items for the second PNS_ITEM as well.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6193
2020-10-31 23:23:54 +00:00
Jeff Young
843974b0bf
Cleanup and formtting.
2020-10-31 15:50:06 +00:00
Jeff Young
ba4d711356
I should have known better than to use a global....
...
When the board is closed and reopened the dummy items belong to a
freed board.
2020-10-31 15:50:06 +00:00
Jeff Young
c17ceb5875
Make sure proxy items at least get the right net for clearance lines.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5980
2020-10-30 23:37:35 +00:00
Werni
a7d5d1f091
Add more consts all over the place
2020-10-27 11:03:35 +00:00
Ian McInerney
31e626f279
Cleanup creation of all our smart pointers
2020-10-26 23:52:44 +00:00
Marek Roszko
a785f70ea1
msgpanel is a widget, shove it to the right folder.
2020-10-25 20:01:12 -04:00
jean-pierre charras
d6f91c810f
Fix a few compil and Coverity warnings.
2020-10-25 10:02:07 +01:00
Marek Roszko
81a7afc76e
Use kicad_algo directly rather than common.h
2020-10-24 08:53:11 -04:00
Marek Roszko
8d7feb3d72
Nip some common.h from headers
2020-10-24 08:28:03 -04:00
Seth Hillbrand
4085757aeb
Remove beginning/ending spaces in translations
...
Adding space padding makes translations more difficult by increasing
string counts
2020-10-20 12:08:04 -07:00
Jeff Young
3045dbd6e8
Minor code clean-up.
2020-10-20 13:38:09 +01:00
Jeff Young
d7ea70ba02
Don't assume a valid constraint.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6059
2020-10-18 20:58:53 +01:00
Jeff Young
02cbcb99df
Fix broken logic in ImportSizes().
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6049
2020-10-18 12:08:16 +01:00
Jeff Young
827699bed2
Just because we have a startItem doesn't mean it can find a width.
...
For instance, a pad with no other tracks attached will return 0.
Fixes https://gitlab.com/kicad/code/kicad/issues/6019
2020-10-17 13:57:07 +01:00
Jeff Young
23d9e2e74a
New rules engine needs non-connected items as well.
2020-10-17 13:52:18 +01:00
Jeff Young
1ee3df61c9
Improve robustness of infobar button handling.
2020-10-16 17:07:59 +01:00
Jeff Young
eea7957e16
Inform user of bad DRC rules when filling zones.
...
ADDED: facility for hypertext links in infobar.
Also made use of this for via constraint errors when routing.
Fixes https://gitlab.com/kicad/code/kicad/issues/5800
2020-10-16 12:44:20 +01:00
Marek Roszko
9656bd310b
Remove eda_item and gr_basic from eda_text.h
2020-10-13 22:46:39 -04:00
Jon Evans
cea73fe510
Restore net highlighting to router tool
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5962
2020-10-13 20:30:38 -04:00
Jon Evans
fd4b9f0efa
PNS: ratlines need to not be debug graphics
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5995
2020-10-13 20:04:47 -04:00
Tomasz Wlostowski
ac8b072284
router: fix assertion failure when starting a route on an empty board
2020-10-13 19:36:36 +02:00
Jeff Young
44dbe3577b
Create proxy items for PNS when needing to query clearances.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5929
2020-10-12 20:59:19 +01:00
Michael Kavanagh
c40483d18a
Cleanup: Move KiCad files into plugins folder
2020-10-12 16:36:08 +00:00
Jeff Young
b92cb5c930
Hook up PNS via command to new rule system.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5951
2020-10-12 00:14:32 +01:00
Jeff Young
bcebb19665
Add implied diffpair netclass rules.
2020-10-11 13:19:23 +01:00
Jeff Young
79f91481f3
Fix missing break stmt.
2020-10-11 01:11:55 +01:00
Jeff Young
f680ff17d6
Need an item to pick a netclass value.
2020-10-11 00:14:42 +01:00
Jeff Young
22cde88ba9
Allow chamfering/filleting of zone/board edge intersections.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5947
2020-10-10 23:09:43 +01:00
Jeff Young
04c4012ee6
Make track/via sizes UI more predictable and compatible with DRC.
...
Two main changes: netclass values need to go through the DRC engine
so they can interact with other rules. They're also now dependent
on the layer being routed as well as the start object.
Also make the controls adjust to each other better. For instance,
copy-track-width needs to turn off when you select a particular
track width, and a particular track width needs to zero out when
you choose copy-track-width.
Fixes https://gitlab.com/kicad/code/kicad/issues/5951
2020-10-10 19:32:30 +01:00
jean-pierre charras
c5f01501c1
PnS, router/router_preview_item: fix incorrect size of SH_RECT shape when drawing it.
...
The width of the rectangle was used instead of the width of outline (usualy 0) to
draw the shape (when dragging the pad for instance)
Fixes #5944
https://gitlab.com/kicad/code/kicad/issues/5944
2020-10-10 10:03:23 +02:00
Jeff Young
b31470012a
Previous check didn't account for router dragging.
2020-10-09 14:30:55 +01:00
Jeff Young
2ca819a627
Don't assume a DRC_CONSTRAINT has a parent rule.
...
It will still have a name, though.
2020-10-09 14:26:09 +01:00
Jeff Young
1cb0cbff2e
Fix crash when router gets notifed but has no current m_placer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5935
2020-10-09 14:26:04 +01:00
Jon Evans
966730710e
Partial fix for routing with no start item
2020-10-08 20:38:08 -04:00
Tomasz Wlostowski
38cef95da9
router: initial support for V6 Design Rules (width/clearance/diff pair width/diff pair gap). Still a lot of work to do!
2020-10-09 00:01:26 +02:00
Tomasz Wlostowski
9bef95418e
router: wip on less intrusive dragged trace optimization
2020-10-09 00:01:26 +02:00
Tomasz Wlostowski
5e4fb46aef
MINOPTMAX: added OptThenMin() method as syntax sugar
2020-10-09 00:01:26 +02:00
Marek Roszko
f5e0754f65
Use the setCursor lambda pattern and fix up the initial cursor states
2020-10-07 23:26:14 -04:00
Mark Roszko
d9485129c8
Implement more context specific cursors using both stock and custom cursors.
2020-10-08 00:50:28 +00:00
Tomasz Wlostowski
eb8287ded8
router: bring back legacy GetEffectivePolygon() for complex pad shapes (more info in comments)
2020-10-07 16:36:37 +02:00
Jeff Young
d23d5510e7
Restore a side-effect that the router appears to depend on.
2020-10-06 00:07:34 +01:00