277bf2b719
Add feedback showing current router state to the message panel
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8265
2021-07-03 13:21:51 -04:00
400f4ae506
Code cleanup.
2021-07-02 15:54:26 +01:00
780a8a5154
Fix another place disallowing internal microvias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8716
2021-07-02 15:54:26 +01:00
740b028180
pns_line_placer: do not constraint the 45deg of current segment in free angle mode.
...
Fixes #8691
https://gitlab.com/kicad/code/kicad/issues/8691
2021-07-01 16:38:31 +02:00
04b71f5167
Meander minimum spacing can be equal to track width + minimum clearance
...
2x track width was too constraining in some scenarios
Also better wording "Min Spacing" to indicate to the user that
the actual spacing could be larger if there are any constraints.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8172
2021-06-29 19:30:01 +01:00
e402563087
Don't recalculate meander spacing. Use constrained value instead.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1776
2021-06-29 19:30:01 +01:00
c159500101
Remove nags and make Sel Layer and add via commands uniform.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8686
2021-06-28 19:17:01 +01:00
0dfb5fcaf9
Error message cleanup.
...
wxString::Format is redundant in a wxLogXXX call.
Error messages should generally be translatable.
Error messages should use generally consistent sentence forms.
2021-06-26 22:53:24 +01:00
a7eb611744
Fix leftover vias in shove mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8597
2021-06-23 22:13:35 -04:00
c6606a0582
Hook up delete to undo last segment when routing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8362
2021-06-19 11:37:20 +01:00
096e342386
Prefix TRACK, ARC and VIA.
2021-06-11 22:07:02 +01:00
f968fc8719
Fix source comment / documentation typos
2021-06-09 19:32:58 +00:00
d946d6e68f
Cleanup some pgm_base.h includes
2021-06-08 21:56:00 -04:00
6e01ce84b9
Break out eda_item_flags.h, fix the typedef to std::uint32_t, fix some signed vars
2021-06-08 19:12:30 -04:00
75ce97e260
Fix the last cause of duplicate segments when completing a route
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6863
2021-06-07 20:34:09 -04:00
d4edc70f65
Remove magic numbers where possible
...
Constant scales will be pre-calculated during compilation, so we can
leave the actual formula in place without penalty
2021-06-07 13:56:31 -07:00
49c5130123
PNS: Implement final cleanup pass for redundant colinear segs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6863
2021-06-06 21:52:35 -04:00
3c6b98a0d5
PNS: preserve auto-detected track width when changing via sizes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8046
2021-06-06 20:18:09 -04:00
99710aba48
PNS: use slightly less greedy algo to reset the mouse trail
2021-06-06 19:47:52 -04:00
6cb8154ec0
PNS: Remove code that broke width changes during placement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8334
2021-06-06 19:21:52 -04:00
6789dac20b
PNS: Keep most recent good placement around for a rainy day
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8562
2021-06-06 18:56:33 -04:00
c9bc45f7ed
PNS: Limit the maximum walkaround distance factor
...
The constant chosen is somewhat arbitrary and may need
further tuning or a more complex algorithm, but in general
this will prevent churning when solutions can't be found or
a solution can be found but it is unrealistic (going around
the entire board)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8558
2021-06-06 16:03:03 -04:00
d32b9c1c25
Use debug group for line placer debug
2021-06-06 15:44:53 -04:00
f5185f6927
Revert part of the anti-churn change, it causes bad side-effects
...
Further performance tuning could be useful but the part that
remains helps the most when hugging in large designs
2021-06-06 15:44:53 -04:00
8377ebb0e1
Fix msvc warnings
2021-06-06 15:30:31 -04:00
10e60acf34
Clean up including of board_design_settings.h
2021-06-06 15:03:42 -04:00
5349f47f95
PNS: Prevent walkaround churn in unsolvable situations
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8558
2021-06-06 14:57:52 -04:00
3475d0cebd
PNS: Grab start item based on clearance if no direct hits found
...
Fixes annoying "routing start point violates DRC" messages when
entering the router from the hotkey and not directly over a track.
2021-06-06 14:57:52 -04:00
17da050e69
Improve walkaround results when last point is inside the hull
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8563
2021-06-06 12:55:32 -04:00
be61bf29dd
Use more accurate hull shapes for round solids
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8561
2021-06-06 09:53:51 -04:00
b610b905fc
Cleanup track.h includes
2021-06-06 09:06:55 -04:00
3b7480c1c1
PNS: Invalidate start/end items after finishing a route
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8555
2021-06-06 08:52:39 -04:00
ab04e24f9a
router: rhMarkObstacles should return a correct error status
...
Long story short: a few days ago I fixed error handling in routeStep(), so it actually started to recognize the wrong error status returned
by rhMarkObstacles() and think that the trace is always incorrect.
fixes: https://gitlab.com/kicad/code/kicad/-/issues/8557
2021-06-04 23:58:56 +02:00
00791e1e37
Fix compile issues on clangd.
2021-06-03 23:41:06 +01:00
1c1ba25ffd
Use char_str instead of c_str in previous commit
2021-06-03 18:13:35 -04:00
daf510344f
Fix build error due to pns changes
2021-06-03 18:05:48 -04:00
63fc7a1908
router: support for drag/walkaround/shove for joints between lines of different widths.
...
fixes: https://gitlab.com/kicad/code/kicad/-/issues/1773
2021-06-03 22:44:53 +02:00
af26eab5fb
router: even more debug in SHOVE
2021-06-03 22:44:53 +02:00
a744857267
router: fix array out-of-bound error in HullIntersection()
...
fixes: https://gitlab.com/kicad/code/kicad/-/issues/8538
2021-06-03 22:44:53 +02:00
3e98c44636
router: LOGGER now stores UUIDs, not pointers to BOARD_ITEMs.
...
Caused occasional crashes when saving the debug event log, as some of the BOARD_ITEMS could have been deleted before SaveLog call.
2021-06-03 22:44:53 +02:00
e5e588ebba
router: temporarily export LINE::Walkaround() debug global variables
2021-06-03 22:44:53 +02:00
70ed5c1ae8
router: introduce concept of 'virtual' vias as a base for shoving/dragging joints of lines of different widths.
2021-06-03 22:44:53 +02:00
4f05262705
Cleanup includes in board.h and footprint.h
2021-06-03 20:19:52 +01:00
4df3cb912d
Remove another leaky wx/log.h header
2021-06-03 08:11:15 -04:00
cf2bb5692a
Remove the wxLog calls from math/util.h for now
...
This was leaking windows headers and partial wx headers to 1084 compilation units......
This also means math/util.h is leaking to 1084 compilation units which seems a bit high too.
2021-06-01 18:44:22 -04:00
247da631f9
Revert "Fix typo and clean up leftover tracks"
...
This reverts commit ed66c0f14d1a102f03c0https://gitlab.com/kicad/code/kicad/-/issues/8526
2021-06-01 11:18:00 -04:00
1a102f03c0
Clean up co-linear tracks after finishing routing
...
This involved adding some extra infrastructure to be able
to handle the case where a track that is sitting in the
router's commit waiting to be added to the board actually
needs to be deleted instead.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8419
2021-05-31 17:36:38 -04:00
382dca4e6f
Fix uninitialized member warnings
...
Based on PVS Studio report
2021-05-30 20:01:01 -04:00
67f0bbc6d7
router: fixed crash in HullIntersection() when the path has 0 or 1 points.
...
fixes: 8515
2021-05-31 00:20:32 +02:00
614787caae
router: clear head line geometry if current head routing failed + small improvement to follow-mouse optimization.
...
Also added a lot of verbosity for the pns-log-viewer tool.
Fixes: 8511
2021-05-31 00:18:42 +02:00
dfd80e077c
router: fix another corner case in LINE::Walkaround() (duplicated vertex triggered by feeding a closed loop as the input path)
...
fixes: 1775
2021-05-31 00:17:12 +02:00
0da85ded2f
PNS: Fix diff pair handling of microvias as start items
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8514
2021-05-30 15:51:28 -04:00
fcb89b99a3
router: walkaround algo should not copy the previous via position when the current iteration via placement fails.
...
fixes: 7827
2021-05-30 00:35:58 +02:00
af2e163890
router: annotate source locations of WALKAROUND debug items
2021-05-30 00:35:54 +02:00
3eb5a484e1
PNS: Don't clip tuning paths to pads on other layers
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8504
2021-05-29 15:52:44 -04:00
28f17c3ae6
PNS: Prevent wrong clearance being cached for new diff pairs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8377
2021-05-29 13:31:17 -04:00
85ca85652d
Do not add debug items to view if debug flag isn't enabled
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8510
2021-05-29 12:40:24 -04:00
bd59da3642
PNS: Local min distance has a minimum points requirement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8510
2021-05-29 12:40:24 -04:00
ebd957b08e
router: rework router's debugging infrastructure to be more compatibile with the 'qa/pns/pns-log-viewer' tool.
...
The log viewer tool lets you inspect all the intermediate stages of the routing algorithms. This patch:
- Adds source location tracking of the debug calls (need to use the PNS_DBG macro, sorry)
- Moves some wxLogTrace calls to DEBUG_DECORATOR::Message() so that messages can be displayed alongside the corresponding geometric shapes
2021-05-29 00:13:24 +02:00
132eb53a40
router: clean some debug clutter
2021-05-29 00:13:24 +02:00
b3caa3c4d4
router: fix ordering of colliding hulls in NODE::NearestObstacle()
...
Replaced the generic SHAPE_LINE_CHAIN::Intersect() with PNS::HullIntersection() which correctly rejects
'non-penetrating' intersections.
2021-05-29 00:13:24 +02:00
e66bbfd1ec
router: improve the feel of the walkaround algorithm
...
Makes walkaround more 'huggy' - the trace being routed sticks to obstacles
instead of jumping around in uncontrollable way.
2021-05-29 00:13:24 +02:00
8148b5d81f
router: improvements in LINE::Walkaround()
...
- Fix walk failure if the input path starts on the hull boundary
(happens very often during tight walkaround)
- Input line can have a loop at the end now. Such condition happens when the routing
destination point lies inside the hull of a colliding primitive.
2021-05-29 00:13:24 +02:00
d2ec3fc4ed
router: P&S-specific hull/line interection function that correctly rejects segments/vertices that only touch the hull polygons without penetrating them
2021-05-29 00:13:24 +02:00
8c4361bbc6
router: adapt to new SHAPE_LINE_CHAIN::INTERSECTIONS structure
2021-05-29 00:13:24 +02:00
5c9a73aa5e
Correct position for grid even when we're not snapping to a point.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8125
2021-05-25 21:57:19 +01:00
4c69a74505
Force layers visible when routing on them.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8432
2021-05-16 11:18:31 +01:00
75f49ba1b6
Add length tuner settings to toolbar context menu
2021-05-12 02:34:52 +00:00
bc6b9b527a
Allow stackup height to be excluded from length calculations
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8384
2021-05-10 22:11:58 -04:00
7356f9568d
Move grid disable modifier from ALT to CTRL.
...
Also had to move the H/V/45 disable modifier from CTRL to SHIFT.
Fixes https://gitlab.com/kicad/code/kicad/issues/8124
2021-05-09 20:17:40 +01:00
1a45d9474b
Don't show commands that cancel routing when routing is in progress
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8363
2021-05-08 14:55:02 -04:00
03cf2b517f
Enum class PAD_ATTR_T
...
Renamed such that python stays the same
2021-05-01 10:51:54 -04:00
e20562b09b
Some cleanup
2021-05-01 10:37:20 -04:00
21fde9b629
enum class PCB_SHAPE_TYPE_T
2021-04-30 22:36:12 -04:00
a433451bd8
router: 'root line' tracking in the SHOVE algorithm. See comments for detailed explanation.
2021-04-27 14:13:16 +02:00
3a8744d054
router: introduce concept of a root lines in the OPTIMIZER.
...
By 'root lines' we mean the oldest traceable ancestor of each track moved by the router
(i.e. after shoving for a while, the root of each shoved line is it's latest non-shoved version).
With this we can teach the OPTIMIZER more tricks, such as the LIMIT_CORNER_COUNT constraint. It ensures
the results of the optimization will not be less cornery than the original line, reducing the feeling
of the optimizer being too intrusive.
2021-04-27 14:13:16 +02:00
76f8861e6e
router: revert Seth's arc adjustment in StartDragging().
...
Fixes picking the last segment instead of the last vertex to drag (when one is requested).
I didn't notice any behaviour change of the dragger wrs to arcs.
2021-04-27 14:13:16 +02:00
e27733587d
Fix 2 minor Coverity warnings.
2021-04-23 19:57:36 +02:00
075bd788eb
Remove unused OBSTACLE_VISITOR::m_extraClearance
2021-04-23 01:53:09 +00:00
ecd9bf696e
Be consistent about using nullptr instead of 0
...
0 can be too easily overloaded into an int, so ensure we use nullptr
when we mean pointers.
2021-04-22 22:20:34 +01:00
cf47d665ea
PNS: Dragged line needs to retain width
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8246
2021-04-22 09:04:41 -04:00
9b1890606d
PNS: Do not allow resolved optimal values to go below board minimums
2021-04-21 22:43:26 -04:00
cbd7d698a9
Fix diff pair error message suffix suggestions
...
We accept diff pairs that end in N/P, no underscore required
2021-04-20 21:08:34 -04:00
2535daf661
PNS: Account for via stack height in diff pair length tuner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8256
2021-04-20 19:31:10 -04:00
dd828bd964
PNS: Bring back original Highlight Collisions behavior
...
From discussion with Tom, Jeff, and Wayne, it appears as though
we all agreed that Highlight Collisions should behave like it
did in 5.1, which is to say, always just highlight collisions,
never prevent them. The Allow DRC Violations checkbox just
controls whether or not you can fix/commit the head line if it
has violations; you are not prevented from moving the head
line to violating positions in any case.
Right now, there does not seem to be much demand for a separate
"Stop at First Obstacle" mode since Walkaround basically does that
but better, but we agreed that if there is demand for it in the
future, it should be implemented as a new router mode rather than
a behavior of Highlight Collisions mode controlled by the Allow
DRC Violations checkbox.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7828
2021-04-18 21:01:07 -04:00
4538d78828
router: fix via shoving regression.
2021-04-19 00:43:30 +02:00
57de83897a
router: VIA SetDrill() and SetPosition() must update the hole shape too.
2021-04-19 00:43:15 +02:00
ec6995697d
PNS: even more free performance
...
If this doesn't work, we have bigger problems
2021-04-18 09:50:06 -04:00
6425ad4118
PNS: Fix propagateDpHeadForces obstacle calculation
...
Using a synthetic via here doesn't quite let us use VIA::PushoutForce
because it will use the wrong clearance, and also doesn't quite have
the logic we want. I am not familiar enough with PushoutForce to know
if its logic is a bug in other cases, so instead I just brought in the
parts of its algorithm that are needed here.
Additionally, we prevent pushing more than once from a given obstacle,
which causes walkaround to be more successful when routing diff pairs
against a large collider such as a keepout area.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8232
2021-04-17 22:37:30 -04:00
5974446523
PNS: Let's make the r-tree work for us
...
I'm not sure where the magic number of "4x worst" came from, but it's
been around forever. This is extremely inefficient as it negates much
of the power of r-tree filtering in dense designs. If we really trusted
it, we could set this just to worstClearance. Keeping it above the worst
clearance by a little bit seems to provide enough of a speed improvement
to resolve the test cases I have, so I'll go with that for now.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7777
2021-04-17 21:37:11 -04:00
1d7e5a0443
Fix merge error that prevented a previous change from working
2021-04-14 23:30:16 -04:00
268d570941
PNS: keep last valid diff pair trace as current state
...
This allows fixing/committing what is on screen even if the current
cursor position doesn't have a valid solution (the old behavior
would result in the current trace disappearing)
2021-04-14 23:21:10 -04:00
c829dba88e
PNS: Reduce minimum distance to start turn in diff pair placer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8193
2021-04-14 23:21:10 -04:00
cac4d70154
PNS: Respect fix-all in diff pair placer
2021-04-14 23:21:10 -04:00
296a9df530
PNS: Pick up diff pair starting width from continuation track
2021-04-12 23:10:15 -04:00
1d9ca181a2
PNS: Use existing seg direction if both DP segs are parallel
2021-04-12 22:34:13 -04:00
311cde0984
Safety check suggested by Coverity
2021-04-12 20:42:50 -04:00
2aa5e568e8
Refactoring
2021-04-12 20:40:05 -04:00
73fb85a352
PNS: Calculate diff pair primitive orientation using anchors only
...
The previous method fails if the primitive is an expanding or
contracting pair (diagonals going inward or outward) resulting in
incorrect orientation, which then leads to incorrect candidate
gateways being generated and no solution found.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8185
2021-04-12 20:34:44 -04:00
715c61ac9f
PNS: Fix yet more arc edge cases
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8150
2021-04-12 19:59:55 -04:00
49a91414d7
PNS: Apply co-linear seg merging to drag operations
2021-04-11 22:32:11 -04:00
1c431d9929
PNS: Fix some off-by-one errors with arc dragging
2021-04-11 22:12:53 -04:00
a26fc6d65d
PNS: Fix several issues with arc dragging
...
Do not merge vertices that belong to different arcs
Fix start segment identification after arcs
Fix free-angle drag after arc
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8173
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8150
2021-04-11 17:56:40 -04:00
7ba110bd77
PNS: Fix dragging of segments with arcs in line
2021-04-11 10:18:57 -04:00
a30894e5a1
Allow SHAPE_LINE_CHAIN and SHAPE_ARC to be mirrored using a SEG
2021-04-11 13:27:25 +00:00
fe8fbf1d5d
Use arcs instead of line approximation for Miter shape
...
TODO:
* The resulting line chain is broken with the arcs, and
this appears to be some subsequent issue I was not able to pin down.
* The requirement of a correction factor is not clear to me
2021-04-11 13:27:25 +00:00
5c448057c8
PNS: Prevent state flicker when starting drag
2021-04-10 16:31:39 -04:00
7784d7cb12
PNS: Fix visible area restriction
...
VIEW::GetBoundary() returns the entire view area, not the visible area.
Surprisingly, we had no API for this, so I added one.
Also, changed the dragger behavior to toggle between optimizing just the
modified area and optimizing the visible area, i.e. we will now never
optimize off-screen portions of the dragged track.
2021-04-10 16:13:08 -04:00
94afdcb92a
PNS: Allow control of area-restricted drag optimization
...
CHANGED: The interactive router settings now include a switch to
enable or disable optimization of the entire dragged track,
which is now disabled by default. When enabled, the router
will reroute the entire track (from the dragged segment to
the closest pad/via in each direction) to be more optimal.
When disabled, only the area around the dragged segment
will be modified.
CHANGED: The "optimizer effort" slider is removed from the interactive
router settings dialog, as this setting did not have any
meaningful impact in most cases and was a source of confusion.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5918
2021-04-10 15:17:39 -04:00
dc0cf3b802
Clean up a confusing API.
...
AllowDRCViolations is kept in any mode as a *setting*, but only
controls router behaviour when the mode is mark obstacles.
Fixes https://gitlab.com/kicad/code/kicad/issues/7795
2021-04-10 11:08:02 +01:00
d878cbddbc
PNS: a few forgotten cleanup items
2021-04-07 23:34:45 -04:00
c9040a5c53
PNS: fix some weirdness identified by PVS
2021-04-07 23:16:56 -04:00
d4957b112e
PNS: Keep last valid drag solution in the node
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5450
2021-04-07 21:59:23 -04:00
26835f582c
Some situations require more than one dummy
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7820
2021-04-07 21:30:18 -04:00
9432484394
PNS: Find origin segment correctly when arcs are present
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8139
2021-04-07 20:28:30 -04:00
9f957d3e08
Fix crash when attempting to tune discontinuous lines
...
Also correctly find the tuning path through arcs
https://gitlab.com/kicad/code/kicad/-/issues/8131
2021-04-06 09:07:11 -04:00
b2f788adc1
PNS: Fix UseConnectedTrackWidth when starting from ARCs
2021-04-06 01:27:13 +00:00
e46c9d35ac
Add undo/redo handling to length tuner event loop
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8129
2021-04-05 19:58:14 -04:00
24cd174a23
Don't dereference a possibly-invalid optional
2021-04-05 19:34:57 -04:00
a6c3d74a73
Pass active layer to StartRouting in length tuner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7857
2021-04-04 21:51:54 -04:00
a24bc34b66
Better colors for length tuning popup in dark mode
2021-04-04 20:33:59 -04:00
c7ecb51f77
Update PNS length tuning algorithm to match the new BOARD algorithm
...
Now tracks inside pads are optimized to give a more accurate length.
Also, the start/end of the assembled line is used to identify the right
pad joints for pad-to-die length calculation.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4204
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1765
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6877
2021-04-04 20:27:22 -04:00
cdfb014ab6
CHANGED: Account for via height in track length calculations
2021-04-04 13:59:18 -04:00
6b24abac8f
PNS: Don't snap to end items if snapping is disabled by modifier key
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8033
2021-04-04 10:22:23 -04:00
a8896ebd73
Don't show leading ratline for unconnected net
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8040
2021-04-02 20:29:25 -04:00
f88d39b4f0
Fix state issue in router's switch layer handling.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7590
2021-04-01 18:10:04 +01:00
8cb6f15687
Warn when diff pair router can't start due to too-small-gap.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7795
2021-03-30 19:49:23 +01:00
78a60e9dfb
PNS: Put polygon error outside pad shapes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7672
2021-03-29 19:49:59 -04:00
6cbc3fb97d
Fix a minor inconsistency between router and DRC
...
Also make sure collision highlighting runs at the starting
location of a drag.
See: https://gitlab.com/kicad/code/kicad/-/issues/7672
2021-03-29 19:41:17 -04:00
8be9832153
PNS: Don't highlight Net 0 (the unconnected net)
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8040
2021-03-29 17:45:07 -04:00
132ec37b56
Handle arc in buildHullForPrimitiveShape
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8008
2021-03-25 21:25:30 -04:00
8be213e36f
Trim includes (and use consistent terminology in error messages).
2021-03-21 20:15:47 +00:00
5e0b65c3a8
Change wording of corner rounding action
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4505
2021-03-21 15:55:56 -04:00
cad1cb0262
Improve naming.
2021-03-16 12:07:06 +00:00
18037e2f65
Rework bitmap system to load from archived PNGs
...
Bitmaps are now identified by an enum class instead of by pointers.
Bitmap loading and caching is now handled by a class in common, and
we no longer compile most bitmaps into the binary, so there is no
longer a bitmaps static library.
Instead, bitmaps are archived to a .tar.gz file which is installed
in ${KICAD_DATA}/resources/images.tar.gz
The source PNGs are checked in to Git as the original CPP files were,
so that people can build without the required dependencies to convert
SVGs to PNGs.
Initial support is also added for dark theme icons, although this
is not yet exposed in the GUI.
Stubs are present for multi-resolution image resources, but this is
not fully-baked yet and could use some refinement.
2021-03-11 08:37:35 -05:00
720147d272
Remove transitive inclusion of bitmaps.h
2021-03-07 16:08:57 -05:00
df99ee39d9
PNS: new through vias should span all copper layers
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7576
2021-03-07 17:58:43 +00:00
79a9d69ff5
Coverity fixes for issues 314755, 316287, 324536, 324539, and 324539.
2021-03-02 08:10:37 -05:00
d06e8ef01c
Honour pre-defined-size selections for diff pairs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7759
2021-03-02 12:12:05 +00:00
d269778cd4
PNS: disable smart pads in walkaround if posture is forced
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7710
2021-02-27 13:48:01 -05:00
b36e1c741d
Fix insidious bug which resets layer of SOLID when marking collision.
...
It's supposed to be setting the layer of the collsion display object,
not the host object, but there's a typo.
Fixes https://gitlab.com/kicad/code/kicad/issues/7712
2021-02-25 23:39:48 +00:00
75032f3acd
Use the more-constrained layer when running rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7639
2021-02-25 22:58:07 +00:00
87ea540953
Fix whitespace errors
2021-02-25 17:18:23 +01:00
c79610e132
router: post-rebase fixes
2021-02-25 17:18:23 +01:00
6948cdd8ef
router: Fix return type within pointInside2
2021-02-25 17:18:23 +01:00
9bdfc13155
router: improve locality of post-shove optimization
...
Fixes : #4359
2021-02-25 17:18:23 +01:00
e1d4bb777c
router: use new LINE::Walkaround in the walkaround algo
2021-02-25 17:18:23 +01:00
045d02f818
router: add strict/loose area restriction constraint. WIP
2021-02-25 17:18:23 +01:00
24574aa2f5
router: first insert intersections, then build graph in Walkaround()
2021-02-25 17:18:23 +01:00
61e75a838b
router: replace large stack variables with std::array
2021-02-25 17:18:23 +01:00
028f209126
router: more robust LINE::Walkaround() implementation
2021-02-25 17:18:23 +01:00
e9c55cd0e3
router: if the drag anchor is not reachable by the mouse, use the closest point on dragged trace for optimizer restriction
...
Fixes : #4056
2021-02-25 17:18:23 +01:00
a141ed3444
router: feed view size change events to the router engine
2021-02-25 17:18:23 +01:00
12dfb541fc
router: expose current view area to the router algorithms so that the optimizer could know not to mess with traces/vias not currently visible to the user (wip)
2021-02-25 17:18:23 +01:00
2831c7d24c
router: fix compile error in DRAGGER
2021-02-25 17:18:23 +01:00
b67e5768a6
router: feature to save debug event log & board dump for easier recreation of router bugs and misbehaviours
2021-02-25 17:18:23 +01:00
ebdc68ac1d
router: correctly handle line width in PREVIEW_ITEMs
2021-02-25 17:18:23 +01:00
34c037684b
router: partially migrate SHOVE algorithm to use new DEBUG_DECORATOR
2021-02-25 17:18:23 +01:00
0e6cf3f56e
router: fix board edge clearance queries
...
Fixes : #7254
2021-02-25 17:18:23 +01:00
4574f52eac
router: DRAGGER::CurrentNode() should always return non-null value
2021-02-25 17:18:23 +01:00
e221b11e3b
GRID_HELPER: fixed arithmetic issue in segment snap distance check disguised as 'excessive optimization' by the dragger in the router
2021-02-25 17:18:23 +01:00
325300bd76
router: don't use compound pad shapes if pad contains a single primitive shape
2021-02-25 17:18:23 +01:00
a4bd2ad8c6
router: drag in walkaround mode now works
2021-02-25 17:18:23 +01:00
f84836f51e
router: factor out POSTURE_SOLVER to more generic MOUSE_TRAIL_TRACER class
2021-02-25 17:18:23 +01:00
af95235f47
router: report debug log events from DRAGGER
2021-02-25 17:18:23 +01:00
0306d16748
router: make post-drag optimization less intrusive
...
Fixes : #5918
2021-02-25 17:18:23 +01:00
14ce7a0ad7
router: implement area constraint in optimizer
2021-02-25 17:18:23 +01:00
64cf593ee9
router: debug points now have variable size
2021-02-25 17:18:23 +01:00
caa18c8e16
Fix bugs in diffPair hole-to-hole logic and add rule resolution.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7697
2021-02-25 14:23:02 +00:00
fa89263c8f
Push hole-to-hole min processing down a level.
...
Also removes adding the track width to the via gap, which was
never right.
Fixes https://gitlab.com/kicad/code/kicad/issues/7173
2021-02-24 21:42:00 +00:00
7f892669cc
Consistent punctuation.
2021-02-23 12:46:27 +00:00
c12666ec43
Fix arg type of NODE::followLine
2021-02-20 11:58:55 -05:00
6fce39607e
Fix return type within pointInside2
2021-02-20 11:58:55 -05:00
d0b91b1106
Router, place via: fix issue created by 45b2bc: cancelling via must be made
...
only when the select layer is called.
Fixes #7606
https://gitlab.com/kicad/code/kicad/issues/7606
2021-02-19 17:28:20 +01:00
54282dffe3
Move preview items using FP orientation
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7600
2021-02-18 16:32:40 -08:00
45b2bce698
Cancel placement of via if user cancels layer selection.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7578
2021-02-18 11:53:36 +00:00
5d2dc0b50e
Fix a few (minor) issues:
...
- Make DIALOG_SHIM::SetPosition working)
- rename PCB_BASE_FRAME::SelectLayer() to PCB_BASE_FRAME::SelectOneLayer()
- PCB_BASE_FRAME::SelectOneLayer(): make dismiss dialog by escape key working.
Fixes #7578
https://gitlab.com/kicad/code/kicad/issues/7578
2021-02-17 20:56:43 +01:00
0198d5a3bd
PNS: don't lose track of pad offset when dragging footprints
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7500
2021-02-16 19:47:52 -05:00
9212197c26
Grammar
2021-02-15 15:18:13 -08:00
e2f8b1a4b1
Interpreting wxDialog::ShowModal()'s retval as bool is never what you want.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7454
2021-02-08 17:40:57 +00:00
6272b48481
Make sure layer gets passed in to rules evaluation.
2021-02-08 14:53:49 +00:00
7aa7e3fd43
Push undo/redo blocking down a level in LengthTuner tool.
...
This way it's active only while tuning a single line, rather than
while the tool is selected.
Fixes https://gitlab.com/kicad/code/kicad/issues/7462
2021-02-08 14:15:46 +00:00
792904557e
Remember Parent data when routing
...
Keeps parent information such as UUID and pad removal options for
elements that are just updated in routing rather than created fresh or
fully destroyed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7460
2021-02-07 17:08:43 -08:00
721bf82603
Handle malformed lines in dragCornerInternal
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7398
2021-02-03 20:55:22 -05:00
d7ddc62d7e
Fix mouse warping and dialog placement for layer switcher.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2607
2021-02-02 17:20:01 +00:00
dc4b73fcef
Correct m_board check location in PNS_KICAD_IFACE_BASE::SyncWorld
2021-02-01 11:58:22 -05:00
73886aecb1
Ensure partially triangulated polys are not valid
...
Moves rule area triangulation outside of layer iterator and keeps the
triangulation_valid flag false until the triangulation has been
completed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7032
2021-01-29 16:33:57 -08:00
6a39b81647
Fix the last of broken Doxygen comment specifiers.
2021-01-27 17:39:44 -05:00
3e42ba18a9
Show dragging tools in context selection menu for components
...
Show the dragging tools in the context selection menu when a single
component is selected. Prevent the dragging tools from appearing when
more than one object is selected, as they will not activate anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/7258
2021-01-27 19:55:42 +00:00
b96bcc86b1
Don't restrict start item to same layer if snapping is enabled
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7276
2021-01-25 21:19:26 -05:00
3fcd0860c1
Make 'E' go straight to Custom Track Width dialog.
...
Also fixes some mouse capture issues.
Fixes https://gitlab.com/kicad/code/kicad/issues/7198
2021-01-20 18:19:55 +00:00
330d717c69
Fix typo
2021-01-18 21:50:26 -05:00
44655b98de
Initialize variables properly
2021-01-18 18:35:10 +00:00
68efdb2fff
Push shared parts of GRID_HELPERs into common.
2021-01-16 23:18:10 +00:00
02ccd5fbdb
Make sure properties commands don't go to other tools during routing.
...
Brings up the track widths (or diff pairs) context menu instead,
which seems to be the closest parallel.
Fixes https://gitlab.com/kicad/code/kicad/issues/7099
2021-01-14 15:19:09 +00:00
dc02ec9758
Remove a few const_cast
2021-01-12 20:51:31 +00:00
111fa99f9f
PNS: Use last-segment posture optimization always
...
Also when auto-posture is enabled, don't flutter
until area threshold has been met.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
2021-01-07 20:12:31 -05:00
6ca9a42251
Removes 3 other instances of a potential encoding problem
...
Signed-off-by: hoijui <hoijui.quaero@gmail.com>
2021-01-07 17:36:49 +00:00
e41c06304b
Don't show a leading ratline to a NPTH.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6960
2021-01-07 12:25:04 +00:00
f702b64b8d
Minor improvements to formatting & SNR.
2021-01-07 12:25:04 +00:00
0234b7278a
PNS: Make DIRECTION_45 North be up everywhere
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
2021-01-06 21:47:06 -05:00
46c4727783
Make MSVC happy again
2021-01-05 20:56:37 -05:00
e7b047660c
PNS: Correctly assemble lines with reversed arcs
2021-01-05 17:57:21 -05:00
feda03f69b
PNS: Fix arc orientation when assembling lines with backwards arcs
2021-01-05 17:57:21 -05:00
7431d5c985
PNS: First pass at updating meander placers for arcs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6464
2021-01-05 17:57:21 -05:00
8619086cf2
PNS: re-enable optimization of colinear segs in lines with arcs
2021-01-05 17:57:21 -05:00
8901e71fc8
PNS: Fix loop removal, make walkaround less broken for arcs
2021-01-05 17:57:21 -05:00
02cd8c99cd
Better error messages when routing can't be started.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6541
2021-01-05 18:47:58 +00:00
88d42724e6
Remove diff-pair-gap handling from single-line-router.
...
We can't really support it until we do min/max/opt shoving and
dragging.
Fixes https://gitlab.com/kicad/code/kicad/issues/6932
2021-01-05 16:54:52 +00:00
d975f2f6aa
Commenting and naming for clarity.
2021-01-05 16:54:52 +00:00
f7b20611c1
Enforce hole-to-hole min when placing diffpair vias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6931
2021-01-05 00:26:49 +00:00
93bd2171ab
Formatting.
2021-01-05 00:26:49 +00:00
d24b034cbc
Cleanup (and a minor performance improvement).
2021-01-04 22:32:29 +00:00
2ea6bc5529
Formatting.
2021-01-04 19:19:55 +00:00
648c42f643
Show collisions preventing routing from starting.
...
Also introduces a callback to the infobar so that the view can be
cleaned up when the timer expires.
Fixes https://gitlab.com/kicad/code/kicad/issues/6930
2021-01-04 19:19:55 +00:00
71215bcab3
Make sure TH pads get collision layer highlighted.
...
Also cleans it up to centralise all the decision-making.
Fixes https://gitlab.com/kicad/code/kicad/issues/6925
2021-01-03 21:16:09 +00:00
f01297fedd
Convert an annoying message box to an infobar
2021-01-02 22:14:10 -05:00
8b849b1c49
Fix several bugs in hull push-back with vias.
...
1) take hole plating thickness into account
2) build hulls specifically for via so pushing back to the hull doesn't
have to try and figure out how much extra to push back for the via
and/or hole
3) clear MK_HOLE flags when colliding with the pad itself so that we
don't get stuck in HOLE mode
4) move flag setting/clearing to updateNearest() so that it will keep
track of the state of the nearest collision
Fixes https://gitlab.com/kicad/code/kicad/issues/6913
2021-01-02 19:14:44 +00:00
13094fdc28
Formatting.
2021-01-02 18:38:17 +00:00
85e42890c4
Distinction between via and via hole probably not useful.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6913
2021-01-02 16:41:09 +00:00
068af7d328
When routing don't give NPTH holes a copper clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6903
2021-01-02 16:33:51 +00:00
eba7cb222c
PNS: Fix initial posture guess for pads
2021-01-02 10:32:15 -05:00
6b6694f55f
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6913
2021-01-02 15:04:30 +00:00
42c114f6ed
Record status of via dragging in Walkaround mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/3967
2021-01-02 00:31:02 +00:00
8a049cf290
Make sure bounding boxes get cached on rule areas.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6898
2021-01-01 23:17:49 +00:00
018c17399d
SNR.
2021-01-01 23:17:49 +00:00
fc1b0ec11f
Improve feedback when routing in highlight collisions mode.
...
In particular, when Allow DRC violations is NOT turned on and we
bump in to an obstacle.
2021-01-01 17:25:37 +00:00
3ba17e0a16
Formatting.
2021-01-01 01:02:06 +00:00
ecc0e861d3
Implement hole clearance and hole-to-hole clearance in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6882
2021-01-01 00:31:36 +00:00
5d8e6020d1
Improve clarity.
2021-01-01 00:31:36 +00:00
0e3c9de684
Formatting.
2021-01-01 00:31:36 +00:00
1b93663627
Formatting.
2021-01-01 00:31:36 +00:00
9a0f685a75
PNS: Consider arcs when searching for lines between joints
2020-12-31 13:05:43 -05:00
73248ab219
PNS: correct initial segment direction for posture solver
2020-12-31 13:05:43 -05:00
60fd7fdbb2
Fix comment
2020-12-30 18:52:56 -05:00
510db66f0e
PNS: Fix rollback for arc traces
...
PNS: Update posture solver after rollback
2020-12-30 18:23:24 -05:00
6105ac50da
ADDED: Default hotkey of CTRL+/ for switch corner rounding
2020-12-30 18:23:24 -05:00
b5b64a55ad
PNS: Only run optimization if lastNode is valid
2020-12-30 18:23:24 -05:00
79502a0d88
PNS: A new approach to arc placement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6334
2020-12-30 18:23:24 -05:00
bf9501e1d4
PNS: Fix auto-posture when placing via
2020-12-29 21:14:36 -05:00
689da3794d
PNS: Merge co-linear segments during placement
2020-12-29 21:14:36 -05:00
4c0aa6db1a
PNS: Disable smart pads optimization for vias
...
There is not much point with the current algorithm and it
breaks auto-posture.
2020-12-29 21:14:36 -05:00
81d4e06f00
PNS: Consider pad orientation when routing
...
PNS: Skip smart pads when posture was manually forced
This allows a more-correct pad breakout to be chosen when
smart pads is off.
2020-12-29 01:06:46 -05:00
96d49d1473
PNS: Improved auto-posture when starting from a segment
...
The previous auto-posture algorithm worked great for pads
but not so great when starting routing from a segment.
Now we can optimize the posture based on the starting
segment if one exists, to maximize the "obtuseness" of the
posture.
2020-12-28 23:51:13 -05:00
3adff647a7
PNS: Preserve nearest vertex when dragging in shove mode
2020-12-28 19:44:39 -05:00
be294dabce
PNS: Snap back to last valid point when committing a drag
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6651
2020-12-28 16:36:42 -05:00
3c87e67753
PNS: Allow committing routes even when cursor moves beyond valid solution
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6651
2020-12-27 17:14:38 -05:00
2cdf9875b9
PNS: fix off-by-one in dragCorner45
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6644
2020-12-27 15:58:36 -05:00
c615b7a49b
PNS: make initial direction behavior consistent with fix-all enabled
2020-12-27 15:21:55 -05:00
1c79e3174c
Pcbnew: Prevent footprint jumping when starting to drag it
...
CHANGED: When dragging a footprint, if the mouse isn't directly over the
footprint anchor when 'D' is pressed, the footprint center will jump to
the mouse position when dragging begins. This MR uses the current
mouse position instead of the footprint anchor as the inital reference
point when starting to drag.
Fixes https://gitlab.com/kicad/code/kicad/issues/6813
2020-12-27 17:43:52 +00:00
8ad89ae457
PNS: fix manual posture mode
2020-12-24 17:31:54 -05:00
8a2667c4c3
PNS: Fix all segments by default (and make optional)
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5920
2020-12-23 21:55:43 -05:00
8c247fc97c
PNS: Add a setting to disable posture solver
...
PNS: Prevent autoposture flutter when trail has little area
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6797
2020-12-23 21:02:17 -05:00
912657dd23
Component dragger: make relaxed segment pickup work for PTH pads
2020-12-22 22:43:44 -05:00
70c6314c67
Component dragger: be more generous about picking up tracks
...
We now pick up tracks that end anywhere in the pad, not just
at the pad anchor.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5945
2020-12-22 22:28:24 -05:00
70c397a9b4
Implement free vias fully
...
CHANGED: manually-placed (stitching) vias won't have their nets automatically updated
(unless the via is placed directly on a track segment)
CHANGED: stitching vias can be placed on footprint pads and pick up their nets
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5484
2020-12-20 16:29:50 -05:00
cd162a8f58
Honour m_placingVia when avoiding collisions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/3773
2020-12-20 20:36:19 +00:00
e8f38e3c18
Snap to footprint origin when dragging
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6633
2020-12-20 15:15:48 -05:00
ac793618f9
Set start item for inline dragging so that snapping works properly
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6796
2020-12-20 11:13:09 -05:00
46314f6483
Only compare collision-corrected routes when looking for shortest.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6511
2020-12-19 23:20:27 +00:00
acfbcb4beb
Make distinction between PCBNew-wide tools and Board-specific tools.
...
The old names were really hard to keep straight (even for me, who named
many of them).
2020-12-16 13:32:46 +00:00
5f9ed2583c
Don't put up double lock confirmation dialogs.
...
Also removes EditToolSelectionFilter which was misused in more places
than it was used correctly. The original point of the client filter
was to move the logic to the point of use, which the
EditToolSelectionFilter sort of obviated anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/6751
2020-12-15 22:34:24 +00:00
c0a9742b3a
Apply 0ef63aca47 to diff pairs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6314
2020-12-12 03:43:41 +00:00
dd4298bb94
Coverity fixes: 280374, 313611, 313648, 313649, and 314720.
2020-12-11 13:29:52 -05:00
0ef63aca47
Don't reset tail when changing track width/via sizes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6314
2020-12-11 17:58:36 +00:00
7cb2d19814
Honour alt-means-disable-grid-snapping in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6679
2020-12-11 13:11:47 +00:00
d304f12284
Formatting.
2020-12-11 12:48:04 +00:00
73b7b104cd
Fix some issues with Infobar sizing.
...
This also commits to the new strategy as it wasn't really compatible
with if-def-ing anymore.
2020-12-11 12:39:40 +00:00
be4b6ec06a
Cleanup compiler warnings
2020-12-09 23:13:33 +00:00
b1f0bf7334
More consistent naming.
2020-12-08 13:05:39 +00:00
aa3e29ee7c
Don't re-enter router on subsequent X key.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6656
Fixes https://gitlab.com/kicad/code/kicad/issues/4504
2020-12-08 00:13:29 +00:00
f09ca9ceee
Pass unhandled events when dragging in the router tool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6630
2020-12-06 12:30:29 +00:00
7b347d793b
Change gears on no-connect net generation. See bug rpt.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6534
Fixes https://gitlab.com/kicad/code/kicad/issues/6615
2020-12-04 18:25:48 +00:00
00edc85f4f
Allow layer switching when routing from pad.
...
Additionally, don't process layer events from both main loop and
transitions -- it makes for a mess.
Fixes https://gitlab.com/kicad/code/kicad/issues/4832
2020-12-02 21:17:56 +00:00
f2ac6fcd44
Treat net 0 items as each being in their own net.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6534
2020-12-02 20:05:47 +00:00
d06d35a74d
Formatting.
2020-12-02 20:05:47 +00:00
288ab7ed6f
Minor formatting cleanup.
2020-12-01 14:04:01 +00:00
06b9439dbf
Edge Cuts shapes have zero width.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6517
2020-11-26 17:42:46 +00:00
9c7c05c161
Mostly formatting cleanup but a few type-casting cleanups too.
2020-11-24 22:16:41 +00:00
976c6262f4
French translation update (fix also trailing spaces in a few sentences)
2020-11-23 11:42:25 +01:00
b32c2a6c90
Refactor EDA_TEXT::TransformToSegmentList() to return a vector of points
...
This allows reading text object as it is rendered through python API.
2020-11-23 07:50:54 +00:00
ff3bd7e72a
Fix a crash bug in DRC, and equate Margin to Edge.Cuts.
2020-11-20 21:22:27 +00:00
9e9946628a
Go back to arrow cursor on a cancel (or finish).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6421
2020-11-19 20:09:28 +00:00
99da663e82
Remove unused variables plus some more fixes from CppCheck
...
Remove unused variables plus a few more fixes from CppCheck
Remove unused variables plus a few more fixes from CppCheck
2020-11-19 02:28:47 +00:00
0e44f5128c
Add const specifiers
2020-11-18 19:50:36 +00:00
795e45836d
Fix assert in DRC.
2020-11-17 17:41:57 +00:00
7bd31d5237
Naming conventions.
2020-11-14 18:26:03 +00:00
ec020dd19f
First-class support for filled shapes.
2020-11-14 01:40:32 +00:00
bdbb68f813
MODULE -> FOOTPRINT.
2020-11-13 16:04:03 +00:00
3451ac3088
PCB_MODULE_T -> PCB_FOOTPRINT_T
2020-11-13 15:16:24 +00:00
52a46341db
More module -> footprint.
2020-11-13 15:16:24 +00:00
f5443de7f9
D_PAD -> PAD.
2020-11-13 15:16:24 +00:00
84dd5108ba
Remove some "class_" prefixes from files.
2020-11-13 15:16:23 +00:00
f7333ad64a
Update some classnames including archaic zone names.
2020-11-12 10:31:25 +00:00
da5cfb5df1
Improve commenting.
2020-11-11 17:52:15 +00:00
5e569e81e7
Performance enhancements for PNS.
2020-11-11 15:32:30 +00:00
d88eaaf477
Fix various compiler and Coverity warnings
2020-11-11 00:41:02 +00:00
ce3b2921bd
Sort potential start candidates by distance from cursor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1926
2020-11-10 23:50:57 +00:00
bd63c018c9
Don't snap synthetic priming event.
...
We need to let the consumer of the event do snapping (so that, for
instance, it can also snap to tracks, pads, etc.)
Fixes https://gitlab.com/kicad/code/kicad/issues/4365
2020-11-09 17:21:47 +00:00
64876a2761
PNS_DRAGGER should report its layers.
...
Also, don't use ViewGetLayers() for visibility checking. For some
things (like vias) it deals with synthetic layers, not board layers.
Fixes https://gitlab.com/kicad/code/kicad/issues/6328
2020-11-08 17:19:37 +00:00
81ea71fb80
More safety when fetching via sizes.
2020-11-07 18:50:30 +00:00
ae9afdd169
SNR. (Mostly for progammers, but a little for user messages.)
2020-11-02 16:20:00 +00:00
76ac8b5acf
Preflight routing so we can give a warning if it's not going to work.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4975
2020-11-02 00:10:21 +00:00
8bfb255c96
Put a warning when routing can't start due to DRC violation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4975
2020-11-01 23:46:42 +00:00
409cd9d4ee
Formatting.
2020-11-01 20:25:36 +00:00
f6c92ab1ea
DRAGGER needs to report it's nets.
...
Otherwise things like snapping don't work.
Fixes https://gitlab.com/kicad/code/kicad/issues/4147
2020-11-01 19:57:42 +00:00
a95e2184da
A more generic error message when route start pt violates DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1812
2020-11-01 18:23:07 +00:00
2c1b6e42e0
Repair ARC copy constructor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6176
2020-11-01 00:10:08 +00:00
fab87fb97b
Handle proxy items for the second PNS_ITEM as well.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6193
2020-10-31 23:23:54 +00:00
843974b0bf
Cleanup and formtting.
2020-10-31 15:50:06 +00:00
ba4d711356
I should have known better than to use a global....
...
When the board is closed and reopened the dummy items belong to a
freed board.
2020-10-31 15:50:06 +00:00
c17ceb5875
Make sure proxy items at least get the right net for clearance lines.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5980
2020-10-30 23:37:35 +00:00
a7d5d1f091
Add more consts all over the place
2020-10-27 11:03:35 +00:00
31e626f279
Cleanup creation of all our smart pointers
2020-10-26 23:52:44 +00:00
a785f70ea1
msgpanel is a widget, shove it to the right folder.
2020-10-25 20:01:12 -04:00
d6f91c810f
Fix a few compil and Coverity warnings.
2020-10-25 10:02:07 +01:00
81a7afc76e
Use kicad_algo directly rather than common.h
2020-10-24 08:53:11 -04:00
8d7feb3d72
Nip some common.h from headers
2020-10-24 08:28:03 -04:00
4085757aeb
Remove beginning/ending spaces in translations
...
Adding space padding makes translations more difficult by increasing
string counts
2020-10-20 12:08:04 -07:00
3045dbd6e8
Minor code clean-up.
2020-10-20 13:38:09 +01:00
d7ea70ba02
Don't assume a valid constraint.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6059
2020-10-18 20:58:53 +01:00
02cbcb99df
Fix broken logic in ImportSizes().
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6049
2020-10-18 12:08:16 +01:00
827699bed2
Just because we have a startItem doesn't mean it can find a width.
...
For instance, a pad with no other tracks attached will return 0.
Fixes https://gitlab.com/kicad/code/kicad/issues/6019
2020-10-17 13:57:07 +01:00
23d9e2e74a
New rules engine needs non-connected items as well.
2020-10-17 13:52:18 +01:00
1ee3df61c9
Improve robustness of infobar button handling.
2020-10-16 17:07:59 +01:00
eea7957e16
Inform user of bad DRC rules when filling zones.
...
ADDED: facility for hypertext links in infobar.
Also made use of this for via constraint errors when routing.
Fixes https://gitlab.com/kicad/code/kicad/issues/5800
2020-10-16 12:44:20 +01:00
9656bd310b
Remove eda_item and gr_basic from eda_text.h
2020-10-13 22:46:39 -04:00
cea73fe510
Restore net highlighting to router tool
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5962
2020-10-13 20:30:38 -04:00
fd4b9f0efa
PNS: ratlines need to not be debug graphics
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5995
2020-10-13 20:04:47 -04:00
ac8b072284
router: fix assertion failure when starting a route on an empty board
2020-10-13 19:36:36 +02:00
44dbe3577b
Create proxy items for PNS when needing to query clearances.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5929
2020-10-12 20:59:19 +01:00
c40483d18a
Cleanup: Move KiCad files into plugins folder
2020-10-12 16:36:08 +00:00
b92cb5c930
Hook up PNS via command to new rule system.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5951
2020-10-12 00:14:32 +01:00
bcebb19665
Add implied diffpair netclass rules.
2020-10-11 13:19:23 +01:00
79f91481f3
Fix missing break stmt.
2020-10-11 01:11:55 +01:00
f680ff17d6
Need an item to pick a netclass value.
2020-10-11 00:14:42 +01:00
22cde88ba9
Allow chamfering/filleting of zone/board edge intersections.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5947
2020-10-10 23:09:43 +01:00
04c4012ee6
Make track/via sizes UI more predictable and compatible with DRC.
...
Two main changes: netclass values need to go through the DRC engine
so they can interact with other rules. They're also now dependent
on the layer being routed as well as the start object.
Also make the controls adjust to each other better. For instance,
copy-track-width needs to turn off when you select a particular
track width, and a particular track width needs to zero out when
you choose copy-track-width.
Fixes https://gitlab.com/kicad/code/kicad/issues/5951
2020-10-10 19:32:30 +01:00
c5f01501c1
PnS, router/router_preview_item: fix incorrect size of SH_RECT shape when drawing it.
...
The width of the rectangle was used instead of the width of outline (usualy 0) to
draw the shape (when dragging the pad for instance)
Fixes #5944
https://gitlab.com/kicad/code/kicad/issues/5944
2020-10-10 10:03:23 +02:00
b31470012a
Previous check didn't account for router dragging.
2020-10-09 14:30:55 +01:00
2ca819a627
Don't assume a DRC_CONSTRAINT has a parent rule.
...
It will still have a name, though.
2020-10-09 14:26:09 +01:00
1cb0cbff2e
Fix crash when router gets notifed but has no current m_placer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5935
2020-10-09 14:26:04 +01:00
966730710e
Partial fix for routing with no start item
2020-10-08 20:38:08 -04:00
38cef95da9
router: initial support for V6 Design Rules (width/clearance/diff pair width/diff pair gap). Still a lot of work to do!
2020-10-09 00:01:26 +02:00
9bef95418e
router: wip on less intrusive dragged trace optimization
2020-10-09 00:01:26 +02:00
5e4fb46aef
MINOPTMAX: added OptThenMin() method as syntax sugar
2020-10-09 00:01:26 +02:00
f5e0754f65
Use the setCursor lambda pattern and fix up the initial cursor states
2020-10-07 23:26:14 -04:00
d9485129c8
Implement more context specific cursors using both stock and custom cursors.
2020-10-08 00:50:28 +00:00
eb8287ded8
router: bring back legacy GetEffectivePolygon() for complex pad shapes (more info in comments)
2020-10-07 16:36:37 +02:00
d23d5510e7
Restore a side-effect that the router appears to depend on.
2020-10-06 00:07:34 +01:00
35fa857fd8
Make sure router tool passes events it doesn't handle.
...
Fixes undo/redo when router tool is active but not routing.
2020-10-05 23:16:37 +01:00
18a3c4c1db
Fix some fairly catastrophic bugs in shape collision optimization.
...
I did a little too much copy & paste last time around....
2020-10-05 22:32:07 +01:00
6d50c9749c
Mark the colliding shape so we know which one to highlight.
...
Also checks the nets when checking for a pad being flashed on a particular
layer (so we don't end up thinking the currently-routing-collided track
is a connection).
2020-10-05 22:32:07 +01:00
d063c56971
Move PNS pad solids to COMPOUND_SHAPE.
...
Also fixes plated holes solids to include plating thickness.
2020-10-05 22:32:07 +01:00
37906511f5
Class renaming.
...
DRAWSEGMENT -> PCB_SHAPE
EDGE_MODULE -> FP_SHAPE
TEXTE_PCB -> PCB_TEXT
TEXTE_MODULE -> FP_TEXT
2020-10-05 11:55:33 +01:00
a28a0e14ba
Fix conversion warnings
2020-10-05 10:41:14 +00:00
7a4900b8dc
PCB_LINE_T -> PCB_SHAPE_T and PCB_MODULE_EDGE_T -> PCB_FP_SHAPE_T
...
Also updated footprint text and zone types for consistencey.
2020-10-04 16:49:04 +01:00
bb753aaadf
Clean up terminology around active & high contrast layers.
2020-10-03 22:55:34 +01:00
400c15b8eb
Add mils to units, remove useMils variables
2020-10-03 20:06:56 +00:00
6f54a9982c
Remove PCB_LAYER_WIDGET
2020-09-30 19:12:26 -04:00
bf3cb0b1d0
Standardize pad type enums
2020-09-30 08:38:35 -07:00
d3f8f2b81e
Remove confusion between pad->IsOnLayer and pad->IsPadOnLayer
2020-09-30 11:50:51 +01:00
258d1a1971
Pcb: Get proper "Break Track" location when invoked from RMB context menu
...
When invoking "Break Track" from the RMB context menu, Pcbnew
gets and uses the current position of the mouse to figure out where to
break the track. The problem is that the mouse has to be moved to select
the "Break Track" menu item, and the mouse position used is wrong. This
can result in the break in the wrong location or not happening at all.
CHANGED: This commit determines if the "Break Track" was invoked from a
context menu or a hotkey. If a hotkey, it uses the current mosue position.
If a context menu, it uses the original postion of the mouse when the menu
was opened.
2020-09-28 16:56:02 +00:00
f8875bc5a6
Move std::contains to alg::contains.
2020-09-26 14:42:40 +01:00
d7e80f8008
Add std::contains() to simplify a lot of code.
2020-09-26 12:40:32 +01:00
bba29a1036
Always show the track and via menu in the router context menu
2020-09-25 00:17:54 +01:00
672756a018
Move the router tools to a TOOL_MENU context menu
...
The previous way of displaying a context menu was being
usurped by the selection tool because it was displaying its
menu before DispatchContextMenu was called, and all other tools
explictly use the TOOL_MENU system.
Fixes https://gitlab.com/kicad/code/kicad/issues/5762
2020-09-24 23:51:34 +01:00
18e17abd6a
Rename "Keepout" to "Rule Area"
...
These objects can now be used in advanced DRC rules and
not just for keeping things out. Also remove the restriction
that at least one of the "basic" keepout rules must be set,
so that these areas can be used for more advanced rules.
2020-09-21 23:55:02 -04:00
ece2ae9805
Don't capture commands in the router eventloop that it doesn't process.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5692
2020-09-19 12:08:18 +01:00
f493e270ea
ADDED: Menu option to enable/disable snap to grid
...
You can now enable and disable snap to grid when drawing/editing across
all apps. You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
2020-09-10 20:09:30 -07:00
173b4ff588
Add snapping to eeschema
...
This generalizes both the SetPosition() function and ORIGIN_VIEWITEM
class away from the pcbnew-centric.
2020-09-09 10:18:15 -07:00
54ca66be72
router: NODE::AllItemsInNet() can now filter by item type
2020-09-08 01:31:42 +02:00
f2338d9faa
router: fix segfault with NPTH holes in COMPONENT_DRAGGER
2020-09-08 01:31:42 +02:00
88635ee5b6
Clean up error messages.
...
Convert a lot of nags to InfoBar errors/warnings/messages, and some
that never should have been exposed to wxFAIL_MSGs.
2020-08-31 14:19:57 +01:00
7a5c99ee0f
Tweak the mouse-based posture solver
...
Add an epsilon to reduce flutter
Add a lock after a certain distance
Forget the old trail when unlocking
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5381
2020-08-30 19:54:09 -04:00
8b7c0cbe04
Adjust footprint zones while dragging footprint.
2020-08-28 11:05:58 +01:00
f4e8c194be
Revise restriction on No Copper setting
...
This allows the user to specify a NPTH with "No Copper", allowing a pad
to retain the mask layer without a copper landing.
Fixes https://gitlab.com/kicad/code/kicad/issues/3407
Fixes https://gitlab.com/kicad/code/kicad/issues/5237
2020-08-26 18:09:06 +00:00
adff7f749b
PNS: Addition layer smarts
...
Edge.Cuts have no parent but cross all layers, so we need to handle the
"all layers" case. Also renames "IsPadOnLayer" to "IsOnLayer".
Fixes https://gitlab.com/kicad/code/kicad/issues/5351
2020-08-25 09:42:50 -07:00
686af65a9b
Fix issue generating alternate shape
...
Boolean ops need boolean inputs.
2020-08-22 08:04:03 -07:00
842641308f
Solids don't always have nets (even a defualt one).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5290
2020-08-21 20:08:12 +01:00
9a4f92dfd9
Ensure that all pads with holes have alts
...
Alternate shapes for holes that are fallback clearance are needed in
case we have missing copper on any layer
Fixes https://gitlab.com/kicad/code/kicad/issues/5233
2020-08-20 21:50:37 -07:00
dd9f7c8c25
PNS: Add defensive coding to AlternateShape()
...
Adds additional check/warnings about missing alternate shapes when they
are expected.
Fixes https://gitlab.com/kicad/code/kicad/issues/5233
2020-08-19 09:02:06 -07:00
ede39780e2
Remove all debugging output that cannot be disabled.
...
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.
There is still some debugging output in test code that really needs to
be moved into a unit test.
Add debugging output section to the coding policy regarding debugging
output.
2020-08-18 10:17:36 -04:00
4cc820f550
PNS: skip hulls for layers where the solid isn't
...
If we don't have an object on the required layer and there isn't a
through-hole (m_alternateShape), then we shouldn't return a hull
Fixes https://gitlab.com/kicad/code/kicad/issues/5233
2020-08-18 06:53:03 -07:00
5c3a1d059e
Fix memory mgmt issue with SOLID shapes
...
We don't delete items from the CTOR but we do need to check if they
exist in the incoming SOLID before cloning
Fixes https://gitlab.com/kicad/code/kicad/issues/5214
2020-08-17 06:16:11 -07:00
afc94fdec3
PNS: Be better about handling multiple layers
...
Rather than adding pads/vias multiple times for each layer, we introduce
the "alternate shape" idiom to PNS that allows us to optionally place
the collision constraint on the hole instead of the pad for those
vias/pads that have inner layers removed.
Fixes https://gitlab.com/kicad/code/kicad/issues/5158
Fixes https://gitlab.com/kicad/code/kicad/issues/5198
Fixes https://gitlab.com/kicad/code/kicad/issues/5195
2020-08-16 12:39:15 -07:00
57c3d8e8d8
Make sure preview group gets added to view after a clear.
2020-08-15 21:13:44 +01:00
bd14f8a82a
ADDED: New appearance control widget for PcbNew
...
Featuring:
- Layer view presets
- Per-type opacity for tracks, vias, pads, zones
- Net and netclass color and visibility controls
CHANGED: Simplified object visibilty controls
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1951
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1981
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2003
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2173
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2254
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4325
2020-08-15 15:24:28 -04:00
463100d67f
Remove a long-standing hack to keep divots out of adjacent zones.
...
The new algorithm unions any adjacent zones before doing the
chamfer/fillet and then subtracts the other zones back out afterwards.
Fixes https://gitlab.com/kicad/code/kicad/issues/3812
2020-08-12 22:20:08 +01:00
9a66a5acad
Cleanup code line endings
2020-08-10 03:27:27 +00:00
5fc6b74c89
ADDED: Remove unused pads
...
This option removes copper layers from pads and vias where they are not
connected to other board elements. This allows the inner layers to be
more closely routed if the via landing pad is not needed.
Fixes https://gitlab.com/kicad/code/kicad/issues/1835
2020-08-10 03:27:26 +00:00
90a17427ee
Give the length tuning tool an inital end point that isn't the start point
...
Using the starting point as the end point means that the tool
initializes with 0 length traces and so nothing is visible.
Fixes https://gitlab.com/kicad/code/kicad/issues/1912
2020-08-08 23:41:48 +01:00
7cd8f710b6
Clean up unused includes.
2020-08-08 16:25:30 +01:00
c57c168753
PNS: Remove items from all layers
...
subIndices control which layers the items are inserted onto and removed
from. The iterator to remove items needs to be inclusive of the
first/last layers
Fixes https://gitlab.com/kicad/code/kicad/issues/5090
Fixes https://gitlab.com/kicad/code/kicad/issues/5075
Fixes https://gitlab.com/kicad/code/kicad/issues/5034
2020-08-05 19:39:55 -07:00
73832a9708
Work around an event processing failure.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4273
2020-08-05 19:36:58 +01:00
e2ec9d9f00
A more fail-safe way to disallow editing while routing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4413
Fixes https://gitlab.com/kicad/code/kicad/issues/5067
2020-08-05 16:51:58 +01:00
59ba793096
Disable various combinations of router and editing commands.
...
They just confuse each other.
Fixes https://gitlab.com/kicad/code/kicad/issues/5067
2020-08-04 14:32:02 +01:00
74b9cce682
Try again at dragging module edges.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5037
2020-08-03 23:53:45 +01:00
ef2388b5bb
Fix issue with dragging flipped MODULE.
2020-08-02 17:05:13 +01:00
d586495c0a
Preview fp edges & text while dragging in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5037
2020-08-01 15:40:34 +01:00
89a953e039
Migrated GetEffectiveShape(s) to SHAPE_COMPOUND
2020-07-29 23:14:03 +02:00
85aecc15ee
router: fix mistake in 45/free-angle mode selection when dragging corners
2020-07-29 23:14:03 +02:00
c2b9db293f
router: prevent heap crash when initial walkaround line is empty
2020-07-29 23:14:03 +02:00
1f5fb979b9
Keep PNS item RTree on layer-by-layer
...
Rather than extra splitting of the RTree that we use for collision
detection on types and direction, we limit this to checks on
layer-by-layer basis. This also allows for layer expansion by using
deque of RTrees rather than fixed index
This fixes the missing layernumbers and keeps the layers in a deque to
prevent re-allocation on expansion.
Replaces ad94b6205
2020-07-29 11:21:00 -07:00
f00c59c446
Fix a few Coverity warnings.
2020-07-29 09:26:57 +02:00
ad94b6205a
Revert "Keep PNS item RTree on layer-by-layer"
...
This reverts commit a34d33c460
2020-07-28 21:20:19 -07:00
a34d33c460
Keep PNS item RTree on layer-by-layer
...
Rather than extra splitting of the RTree that we use for collision
detection on types and direction, we limit this to checks on
layer-by-layer basis. This also allows for layer expansion by using
vector of RTrees rather than fixed index
2020-07-28 10:17:56 -07:00
46602148dc
Fix overly aggressive assert.
2020-07-28 13:35:37 +01:00
4153309fba
Add defensive code.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4941
2020-07-25 23:54:04 +01:00
bf445c1a95
Performance enhancements.
...
1) cache pad polygon outlines
huge improvement in connectivity performance and a decent
improvement in DRC performance
2) don't pre-allocate CONTEXT stack
significant improvement in DRC rule performance
2) don't keep re-encoding strings
decent improvement in DRC rule performance
2020-07-25 13:03:33 +01:00
70b98c3b49
router: dump entire event log + annotated PCB upon user request
2020-07-22 18:05:54 +02:00
379aa8f3b5
router: clearer distinction between LOGGER and DEBUG_DECORATOR classes.
...
The first one keeps a log of events (start routing, mouse motion, etc).
The second allows for adding temporary debug drawings and messages which are stored synchronously with the events in LOGGER.
The event stream together with the PCB design (now with UUIDs) can be used to deterministically replay routing bugs as the user sees them.
2020-07-22 18:05:54 +02:00
2a2e389a94
router: auto-guess track posture from mouse movements, experimental!
2020-07-22 18:05:50 +02:00
fd07e94760
router: abstract segment links into a LINK_HOLDER interface. DIFF_PAIRS are now also linkable
2020-07-22 17:04:42 +02:00
450107e453
Remove if statement with duplicated branches in router
2020-07-22 00:18:30 +01:00
2f31bf278b
Fix layer hotkey dispatch
...
Hotkeys received by more than one tool need AF_NOTIFY
2020-07-11 21:59:16 -04:00
5d118b0700
More visibility settings infrastructure
...
ADDED: Three-state high contrast mode action
ADDED: Save contrast mode in local settings
Also some initial infrastructure for layer presets
2020-07-11 21:59:07 -04:00
0148c1db84
Support layer switch hotkeys while routing
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4699
2020-07-03 19:49:19 -04:00
3d7610d6b9
Hide PNS debug graphics behind an AC key
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4061
2020-07-03 19:33:36 -04:00
c0aa6965de
Migrate PcbNew project settings to new framework
...
Various architecture upgrades to support this.
Creating a BOARD now requires a valid PROJECT, which caused
some (mostly transparent) changes to the Python API internals.
ADDED: Project local settings file
CHANGED: Board design settings are no longer stored in PCB file
CHANGED: Net classes are no longer stored in PCB file
CHANGED: Importing board settings now reads boards, not just projects
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2578
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4070
2020-07-02 22:08:54 -04:00
2cfd6ba978
Fix a couple of integer overflows.
2020-07-02 22:52:37 +01:00
eb1ff80d57
SHAPE collision fixes.
...
1) An actual distance of 0 is still a collision, even if the allowed
distance is 0.
2) Be consitent about edges and interiors. Everyone expect the edge
of a RECT to be part of the RECT; same with a CIRCLE. SHAPE_POLY_SET
shouldn't be any different. (And SHAPE_LINE_CHAIN was a split-
personality with the edge considered part of it for Collide() but not
for PointInside()).
2020-07-02 21:38:37 +01:00
441dfa30f0
Return individual custom pad shapes instead of a SHAPE_POLY_SET.
...
Also implements an optional pointer to return the actual distance
from all the SHAPE collision routines.
Fixes https://gitlab.com/kicad/code/kicad/issues/4774
2020-07-02 17:09:15 +01:00
17adb6c3c6
Add context menu to route and zone toolbar items
...
ADDED: Context menu for route and zone toolbar items
2020-06-26 21:29:03 +00:00
d01b29ab37
Cleanup pad geometry handling.
...
There were a lot of plotters, exporters, etc. that were rolling their
own implementations.
This also introduces a lazily-built set of SHAPE objects for doing
collision detection and some forms of rendering (and later DRC).
2020-06-22 22:28:37 +01:00
aeed8e6e2c
Finish implementation of DRAWSEGMENT::C_RECT.
...
It's currently only supported in the Footprint Editor. It could be
easily added to the board editor (all the code is there), but the board
editor is a little short on room in the drawing tools toolbar.
2020-06-15 20:51:31 +01:00
47ab7c78a6
Divorce GRID_HELPER from the parent frame.
...
This moves GRID_HELPER fully into the tool framework.
2020-06-13 22:44:16 +01:00
a8ab668122
Move SHAPE_ARC to start->mid->end format
...
The arc shapes need to connect with their adjacent points. By storing
the relevant points, we allow exact point matching on both ends of the
arc as well as localize point storage.
2020-06-13 11:23:14 -07:00
1c46bf1955
PNS: Use segment shape for all oval pads
...
Instead of calculating a simple polygon for the oval pads that are
rotated, we use a rotated segment.
Fixes https://gitlab.com/kicad/code/kicad/issues/4604
(cherry picked from commit 25b8da8e3b
2020-06-04 20:29:25 -07:00
674226f99f
pcbnew: Set flag when cancelling during routing
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4475
2020-06-04 15:48:01 -07:00
c7daf8a8f3
ADDED: Cross-probe highlighting of bus members
...
Note: this is a basic implementation but it could be
improved once we include bus information in the netlist
and pcbnew can natively keep track of buses and nets
instead of just nets.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4158
2020-05-24 13:30:23 -04:00
6692935808
Consolidate common viewer actions across cvpcb and pcbnew frames
...
* Consolidate the measure tool into one tool (this gives cvpcb
unit changing and snapping capabilities in its measure tool)
* Transition cvpcb to use actions for the sketch modes
* Replumb how magnetic items settings are stored and used
2020-05-24 11:58:33 +01:00
05855a5a1c
Performance enhancements for DRC.
2020-05-18 13:38:17 +01:00
3c3984a6fc
Generalize default footprint fields.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2289
2020-05-08 23:30:33 +01:00
51eac3e3e6
Split pcbnew and footprint editor settings getters for clarity
2020-05-05 21:46:00 -04:00
83cb9c0d14
Fix a few Coverity and compil minor warnings. Remove dead code
2020-04-21 12:47:48 +02:00
7db355e34a
ADDED: TOOL_ACTION for switching PNS router mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2249
2020-04-19 22:44:05 +00:00
9c8941e040
Remove a bunch of globals.
2020-04-16 17:34:46 +01:00
4a3cd77416
router: smarter way to check the shove direction without using silly heuristics
2020-04-15 13:00:48 +02:00
6e800bddae
Rationalize penWidth processing as first step in removing some globals.
2020-04-13 20:58:13 +01:00
bdada70ee7
Cosmetic enhancements: add bitmaps to a few context menus.
...
Fix also a minor compil warning.
2020-04-12 10:29:28 +02:00
ffe0b4aba1
Fix a few Coverity warnings.
2020-04-02 14:21:09 +02:00
ddb7b2b2b7
pns router: fix possible hang when using "end" key to finish the current track.
...
Add also left double click (same as "end" key) to finish the track.
Fixes #4116
https://gitlab.com/kicad/code/kicad/issues/4116
2020-04-02 14:21:09 +02:00
e811101567
fix a few Coverity warnings.
2020-04-01 09:34:44 +02:00
6e47f147aa
A few Coverity fixes.
2020-03-30 09:50:26 +02:00
9d2712a824
Fix a few Coverity warnings.
...
It also fix:
Fixes #4082
https://gitlab.com/kicad/code/kicad/issues/4082
2020-03-29 18:42:24 +02:00
4dfe630b28
PNS: Moving the rest of the placer to Fix/Commit
...
Springback introduced a new PNS structure to check for valid placement
as well as separating the Fix/Commit routines. This updates the
remaining placers to utilize the new structure.
Fixes https://gitlab.com/kicad/code/kicad/issues/4008
2020-03-06 09:56:44 -08:00
f6317fba82
PNS: Protect drag from null deref
...
Items that do not have nets will not be in the index, so we need to
avoid the null pointer when adding drag tagets
Fixes https://gitlab.com/kicad/code/kicad/issues/4009
2020-03-06 09:32:04 -08:00
0417a6b409
PNS: Fix missing via on zero-length
...
The current node needs to be kept for zero-length lines when placing a
via.
Fixes https://gitlab.com/kicad/code/kicad/issues/4005
2020-03-05 15:02:40 -08:00
b0d9838fb4
PNS: Correct assertion when dragging
...
Dragging using highlight caused an assertion as the duplicated lines
were being re-added with their old links still inplace. While this was
probably fine as the link references shouldn't be stale, we clear them
to allow for the possibibility that the dragger will adjust the links in
the future.
2020-03-05 08:47:06 -08:00
4c2626f6b0
PNS: Don't use PNS margin to calc bump direction
...
The bump direction should only be concerned with physical points to
calculate the heuristic for loop-back otherwise we get too many false
positives.
Fixes https://gitlab.com/kicad/code/kicad/issues/3971
2020-03-04 19:22:57 -06:00
fe8524b9bb
Update DIFF_PAIR_PLACER to new callbacks
...
Needs to handle changes to PNS_ROUTER. This does not implement
springback or backspace in DIFF_PAIR_PLACER, only allows committing
lines as before
Fixes https://gitlab.com/kicad/code/kicad/issues/3988
2020-03-04 17:23:04 -06:00
d4cbc348de
PNS: avoid committing route with nothing
...
The node is not neccesarily populated when committing, so we need to
check for validity first.
Fixes #3984 | https://gitlab.com/kicad/code/kicad/issues/3984
2020-03-03 14:02:32 -08:00
9769e1020b
PNS: Don't link unroutable items
...
The joint map only works for items that are routable, so don't bother
adding unroutable items as this only takes additional time to process
Fixes #3976 | https://gitlab.com/kicad/code/kicad/issues/3976
2020-03-03 12:42:56 -08:00
d6706c257c
PNS: clear via when fixing route
...
When fixing the route, we need to clear the via to avoid re-placing it
on each future click.
Fixes #3966 | https://gitlab.com/kicad/code/kicad/issues/3966
2020-03-02 16:22:34 -08:00
386147628e
PNS: Initialize placement test
2020-03-02 16:22:34 -08:00
3c19704349
PNS: Don't add null items to drag
...
Not all footprint pad items are connected to elements in the PNS, so if
we don't find the parent element, we avoid later crashes/assertions by
skipping their addition
Fixes #3972 | https://gitlab.com/kicad/code/kicad/issues/3972
2020-03-02 11:28:14 -08:00
18db471967
PNS: Line placer returns false when nothing committed
...
The true/false return should be triggered on whether any elements have
been commited to the line
Fixes #3969 | https://gitlab.com/kicad/code/kicad/issues/3969
2020-03-02 11:11:13 -08:00
a28f58d14d
router: fix regression in PNS_KICAD_IFACE treating newly created items as invisible (side effect = non-45 degree angles due to incorrect snapping)
2020-02-29 20:41:31 +01:00
6850067182
router: commit traces made in single stroke/click (fixes regression introduced with Backspace support)
2020-02-29 20:40:19 +01:00
e5fff302a3
router: fix arc drawing in ROUTER_PREVIEW_ITEM
2020-02-28 23:52:33 +01:00
e0bad936bf
router: enable inline dragging of components
2020-02-28 23:17:15 +01:00
44905e1b0a
router: initial support for dragging components with traces attached
2020-02-28 23:17:15 +01:00
b2b1edbcd1
router: KICAD_IFACE can now commit changes to module positions
2020-02-28 23:17:15 +01:00
b6e059f018
router: use a common base class for all dragging algorithms
2020-02-28 23:17:15 +01:00
1d0ee66187
router: kill debug printf()
2020-02-28 23:17:15 +01:00
77478014d8
router: kill some warnings in OPTIMIZER
2020-02-28 23:17:15 +01:00
796aec6e6e
router: SOLID::SetPos() should update the shape position too
2020-02-28 23:17:15 +01:00
5a16fda11a
router: allow modification of SOLIDs in PNS::NODE
2020-02-28 23:17:15 +01:00
7cb3ed456e
PNS: No free-angle drag at the moment.
...
Fixes #3954 | https://gitlab.com/kicad/code/kicad/issues/3954
2020-02-28 12:43:59 -08:00
9cc5b4b3f9
Fix management of nested settings for PNS
2020-02-27 22:53:00 -05:00
f77d2f8cb8
router: option to enable optimization of the track being dragged
2020-02-27 22:02:56 +01:00
4525a17076
router: backspace key to undo last fixed segment(s)
2020-02-27 22:02:56 +01:00
b5c11f21e5
router: rounding mode context menu entry
2020-02-27 22:02:56 +01:00
d1a5d8c78b
router: don't forget the tail when toggling via placement
2020-02-27 22:02:56 +01:00
8ddeb966ca
pns: drag wip on walkaround via mode
2020-02-27 22:02:56 +01:00
cf4945afaa
router: optimizer should now handle 'keep vertex' constraint correctly...
2020-02-27 22:02:56 +01:00
53c3f95ac4
router: initial attempt at walkaround mode for dragger
2020-02-27 22:02:56 +01:00
c0314dbb29
router: dragger can now optimize also the segment being dragged
2020-02-27 22:02:56 +01:00
a6d3ae3c5b
router: NODE now can also query joints
2020-02-27 22:02:56 +01:00
6b767d50c3
router: initial support for user-provided constraints for the optimizer
2020-02-27 22:02:56 +01:00
c2d95a00c1
router: improved handling of corner cases in LINE::Walkaround
2020-02-27 22:02:56 +01:00
37a754c4dd
router: initial attempt at improved 'aim at mouse cursor' strategy in walkaround mode, wip...
2020-02-27 22:02:56 +01:00
43b71cd9e3
router: Clear() method for PNS::LINE
2020-02-27 22:02:56 +01:00
dbe90e163e
router: use one global logger object
2020-02-27 22:02:56 +01:00
4281bd8207
router: keep board in base Kicad Iface class
2020-02-27 22:02:56 +01:00
9e605d6958
router: DEBUG_DECORATOR now allows to name each primitive
2020-02-27 22:02:56 +01:00
065d634b30
router: put non-graphical part of ROUTER_IFACE into a parent class (for unit tests)
2020-02-27 22:02:56 +01:00
9f8ff236d6
Fix load and save of PNS settings
2020-02-25 19:36:36 -05:00
f206db2041
Pcbnew: fix crash on exit after using the track length tool.
...
This is due to the fact the PNS_TUNE_STATUS_POPUP was not hidden
before calling its destructor.
It is now fixed by setting its virtual destructor calling Hide().
TODO: see if it could be used for any class derived from STATUS_POPUP.
(We already have this issue in other places)
2020-02-22 10:34:11 +01:00
8c19b4b6ae
pcbnew: Adding arcs to PNS
...
This is allows ARCs in tracks to be synchronized with
the PNS router. Note this does not yet include the UI components
to route curved traces
2020-02-21 16:11:41 -08:00
e59a3d981e
Implement a new settings framework across all of KiCad
...
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme
Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
2020-02-19 23:44:56 -05:00
8b7d4c2a55
Put tool graphics back on the stack
...
Now that the tool framework gracefully shutdowns the tools, graphics
can be created on the stack inside a tool function.
This reverts commit f6881ce3de
2020-02-05 22:23:44 +00:00
34e5b76c5f
Add virtual constructors to some classes that should have them
...
This is more for safety from undefined deletion behavior than
anything else (it also silences the Clang -Wnon-virtual-dtor warning).
2020-02-05 22:19:14 +00:00
c4fff95078
PNS: Detect collisions including newline width
...
The new line collision search uses BBox() to check for colliding
objects. BBox in the SHAPE_LINE_CHAIN did not include width as the
chains were assumed to be zero-width. This is not the case for
PNS::LINE elements.
We mostly don't notice this because DRC checks for SEGMENT collisions
but it becomes obvious/annoying when we cannot place a track for unknown
reasons and the snap-back doesn't take line width into account.
Fixes #3776 | https://gitlab.com/kicad/code/kicad/issues/3776
2020-01-17 11:23:08 -08:00
f7cb970a02
PNS: Modify MarkObstacles logic to select shorter
...
When routing where we hit multiple obstacles, we choose the shortest
path to allow overlapping hits to choose the shorter path, thus giving a
better chance of returning true for the DRC-compliant path.
Fixes #3773 | https://gitlab.com/kicad/code/kicad/issues/3773
2020-01-16 19:57:38 -08:00
3ab9db6ff1
Update cast in PNS since we are guaranteed to have text
...
We are guaranteed that the BOARD_ITEM will be a TEXTE_MODULE
since we have tested its type already, so just use a static_cast
to remove the overhead.
2020-01-13 19:42:49 +00:00
52bfdb9703
PNS: Assume the current line is a base before optimizing
...
We use the cost of the current line before trying to improve the pad
breakout cost when optimizing the smart pads
Fixes #3759 | https://gitlab.com/kicad/code/kicad/issues/3759
2020-01-12 11:08:46 -08:00
00e58cd974
Fix unintialized values (from coverity scan)
2020-01-12 13:00:42 +00:00
7c28c3838a
Comment-only changes
...
Makes class comments conform to coding standards
2020-01-10 16:43:01 -08:00
88eab8134e
Fix a couple of uninitialized variables (from Coverity scan).
2020-01-11 00:11:31 +00:00
13b6028e1b
Refactor all math into a new kimath library
...
* Split up the thirdparty code into the thirdparty folder (#3637 )
* Create a new kimath static library containing all the math functions
This is part of cleaning the build system for #1906 .
2020-01-07 17:12:59 +00:00
5d46e721e5
pcbnew: Cleanup includes of pcbnew_id.h
...
* Remove unused IDs from the enum
* Remove the include statements from files that no longer need it
2020-01-03 15:39:05 +00:00
19ceb11ae7
Change more enums over to scoped enums
2019-12-28 00:55:11 +00:00
11ff16be4e
Switch to scoped enums
2019-12-20 14:11:39 +00:00
eb3d32f967
SHAPE_LINE_CHAIN: Unify constructors
...
Keeps the multi element SHAPE_LINE_CHAIN constructors in a single
routine using std::vector and implicit construction.
2019-12-12 13:54:48 +00:00
c4d853c1e8
SHAPE_LINE_CHAIN: Remove element access
...
This is the first step to allowing non-segments in the line chain.
External routines cannot be allowed to change the line chain without
going through the internal routines. To accomplish this, we remove the
Vertex() and Point() access routines and only leave the const versions.
Transformations are given for both points as well as the chain itself.
2019-12-12 13:54:48 +00:00
21dd8db7a9
P&S router: length tuning tool: fix a crash after trying to tune a track.
...
It happens on Windows, and wxWidgets 3.1.3.
It is created by PNS_TUNE_STATUS_POPUP instance used in tool.
I am pretty sure this crash is created by the stack switching
when managing events, due to some changes in wxWidgets code.
the fix creates the instance on the heap, instead of on the stack.
This is not the first time I see this kind of issue.
2019-12-12 09:39:51 +01:00
b6b805548d
PNS: Allow snap to temp hidden
...
The IFACE for kicad refers to the board hidden state, not the
temporarily hidden state used by the router. We allow snapping to items
that have been removed by the temporary router state to provide snapping
to original track location.
Fixes #1827 | https://gitlab.com/kicad/code/kicad/issues/1827
(cherry picked from commit 1e64524afb
2019-12-07 09:51:02 -08:00
36fba5bd7f
PCBnew: placing a blind/buried via sometimes incorrectly place a through via.
...
Fixes #1819
https://gitlab.com/kicad/code/kicad/issues/1819
2019-12-06 13:11:33 +01:00
6983c56cf8
Use const references where possible
...
This avoids copy cost on local vars where we only read.
2019-12-05 14:40:22 -08:00
c6f5df134c
Minor speed cleanup
...
This adjusts iterators to use const reference when only used for
copy. It also ensures pre-allocation of vectors when size is known
ahead of time.
2019-12-05 14:20:59 -08:00
b5f021ff9f
Cleanup: Replace push_back with emplace_back
...
In cases where we create a new item and immediately push into a
container, the emplace idiom is faster and more efficient.
2019-12-05 13:41:21 -08:00
4d2e953f42
Cleanup: Replace C-only deprecated headers
...
This replaces headers deprecated by C++14 with their equivalent
replacement
2019-12-05 11:03:15 -08:00
a2edf9c442
Unified update to C++14 std::make_unique
...
This update replaces the existing uses of unique pointer creation with
the C++14 std::make_unique call that provides proper memory release in
event of an exception.
2019-12-05 10:43:55 -08:00
1b14a38b01
pcbnew: Fix hotkeys during routing
...
CHANGED: Fix hotkeys for actions during routing
Previously hotkeys on shifted characters would not be
passed through the router and processed.
2019-11-10 17:47:51 +00:00
d8c80623ce
pcbnew: Fix cursor position after via layer select
...
CHANGED: Move cursor to event position instead of the
dialog position when selecting the via layer
2019-11-10 17:34:16 +00:00
6182133a4e
Ratsnest default value for tracks and vias
...
Fixes: lp:1851611
* https://bugs.launchpad.net/kicad/+bug/1851611
2019-11-07 08:41:56 -08:00
6625d0721e
Implement Get/Set display options
...
The pointer passing for display options is deprecated. This removes the
excess casting as the EDA_FRAME didn't need the base call with no value.
All requests for display options are now returned const and are updated
with a Set() routine after modification.
In Gerbview, this resolves an issue where the display options were not
stored because it was receiving the NULL from EDA_FRAME.
2019-11-07 08:26:44 -08:00
42daf172fd
router: Keep meander placer world in base
...
m_world overloaded in pns_meander_placer and didn't get the correct
pointer in certain tune modes.
Fixes: lp:1851251
* https://bugs.launchpad.net/kicad/+bug/1851251
2019-11-04 09:11:19 -08:00
4178cf7f36
pcbnew: Add PadToDie length for tuning actions
...
This adds the pad to die parameter from each pad to the total line
length of the tuned line for comparison with desired.
Fixes: lp:1711541
* https://bugs.launchpad.net/kicad/+bug/1711541
2019-10-31 16:00:19 -07:00
4135f0c0e7
pcbnew: Don't duplicate tracks
...
Dragging in freeangle mode can be forced, in which case, we don't want
the extra line from the SHOVE element.
Fixes: lp:1845844
* https://bugs.launchpad.net/kicad/+bug/1845844
2019-10-30 10:44:33 -07:00
1c2891e6d4
Fp editor: allow internal layers in footprint keep-out zones Especially: Enable one internal layer to manage keep-out areas only on internal layers Allowing one internal layer is a trick to manage these keep-out areas (visibility and selection) In fact this internal layer groups all internal layers enabled is these keep-out areas.
2019-10-29 11:24:57 +01:00
133772e964
pcbnew: Correct optimizer breakout calculation
...
The previous fix for optimizer breakout length calculation was providing
better scores to longer traces rather than longer breakouts as intended.
This limits the length scoring to breakout only.
2019-10-25 11:18:16 -07:00
07c8596084
pcbnew: Check all layers for routing snaps
...
Flipped footprint pads may report their "primary" layer as not the front
layer in high contrast. We need to check whether the board item for
snaps is visible on the active layers.
Fixes: lp:1847877
* https://bugs.launchpad.net/kicad/+bug/1847877
2019-10-15 09:44:16 -07:00
0f8a1c22ad
pcbnew: Snap during routing needs active parent
...
The router items may not yet have a board item parent. In this case,
the reference to the parent needs to be guarded before dereferencing.
Fixes: lp:1847717
* https://bugs.launchpad.net/kicad/+bug/1847717
2019-10-11 09:16:26 -07:00
cecfeea947
pcbnew: Remove snapping to hidden items
...
Items and layers that are hidden in the view should not be used as snap
points. This happens in multiple locations:
1) Grid Helper for normal tools
2) TOOL_BASE::snapToItem for router
Resolves KiPro Issue #116
Fixes: lp:1833128
* https://bugs.launchpad.net/kicad/+bug/1833128
2019-10-10 09:37:25 -07:00
58d4a8bb4a
pcbnew: Don't reinitialize the router tool in an action
...
Calling Init() in an action routine will reset the router
settings to the state they were in when first starting pcbnew.
The Init() function is automatically called when the tool is created.
Fixes: lp:1843810
* https://bugs.launchpad.net/kicad/+bug/1843810
2019-10-07 16:07:05 -04:00
0aa5424511
pcbnew: Switch over some drawing tools to use PrimeTool
...
Before, if the tools were activated from the context menu,
they would start drawing where the menu item was selected
instead of where the menu was opened.
2019-10-03 19:04:36 +01:00
9a349065db
Better error messages for router.
2019-10-01 15:02:41 +01:00
e7c07501c5
Minor compile warning cleanup
2019-09-05 09:47:52 -07:00
c8a6878eb8
pcbnew: Allow tuning length to be longer than INT_MAX
...
The INT_MAX limit for most elements makes sense only for single-segment,
straight line elements. For elements that accumulate lengths, we should
utilize the long long int (64 bits) to allow for greater lengths.
Fixes: lp:1842367
* https://bugs.launchpad.net/kicad/+bug/1842367
2019-09-03 16:41:09 -07:00
03d5bf0df5
PNS: Check that we are optimizing a pad
...
Vias are also sent to breakout optimizer, so we need to check for the
solid cast before dereference.
Fixes: lp:1841057
* https://bugs.launchpad.net/kicad/+bug/1841057
2019-08-22 08:57:19 -07:00
06cb21cc47
pcbnew: Optimize pad connection revision
...
This modifies that logic for optimizing pad connections.
1) Custom pads now prefer the connections to their longer side. This is
particularly important to match the behavior in a rectangular pad
2) Costs for straight lines are non-zero. This favors fewer connections
3) Custom pad breakouts are at the polygon boundary rather than offset
by 0.1mm. This also matches the circular and rectangular paradigm.
4) Line Heads contained in the pad itself are not optimized. This
prevents escaping the pad unnecessarily
Fixes: lp:1824182
* https://bugs.launchpad.net/kicad/+bug/1824182
2019-08-20 19:35:26 -07:00
aa875e5830
PNS: Don't allow routing on hidden layers
...
If the layer is not shown, we should not be allowing it's items to be
selected and chosen as the start/end items in the router.
(cherry picked from commit fc1fb7a590
2019-08-15 12:40:05 -07:00
619c78622e
pcbnew: Initialize drag and clear links
...
Drag is used for multiple modes so should be initialized when starting.
The line that we generate however needs to be pristine in drag, so we
clear the links in the duplicate.
Fixes: lp:1839612
* https://bugs.launchpad.net/kicad/+bug/1839612
2019-08-12 15:32:16 -07:00
726bceecfd
router: springback now works for dragging vias in shove mode
...
Fixes: lp:1837766
* https://bugs.launchpad.net/kicad/+bug/1837766
2019-08-07 23:49:57 +02:00
88f2318c9c
router: add VIA_HANDLE to refer to VIAs going in/out the SHOVE algorithm without raw pointers
2019-08-07 23:48:28 +02:00
45e4387ed1
router: remove unnecessary include
2019-08-07 23:46:32 +02:00
5666af4d1d
router: copy m_owner when copying PNS::ITEMs
2019-08-07 23:45:38 +02:00
75fcdb3b08
router: disable hole to hole mechanical constraint in P&S until a suitable solution is found (as it is now it breaks springback)
2019-08-07 23:44:43 +02:00
77334628c4
Change default tool behaviour to skip unhandled events.
...
The problem is that wxEVT_CHAR_HOOK doesn’t do the key translation
properly. wxEVT_CHAR does, but we only get to that if we skip the
event at the end of the tool’s event processing loop, which most tools
don’t do. (Selection tools, point editors, pickers, and a couple of
others do skip, which is probably why this didn’t get reported earlier.)
I played around with a couple of ways to fix wxEVT_CHAR_HOOK. Most of
them don’t work, and the few egregious hacks I tried weren't cross-
platform.
So I’m changing it so that most tools now skip at the end of their
event loops. I left out a couple that I felt were high risk (length
tuning, for instance). But there’s still enough risk that I’m 100%
sure it will break something, I just haven’t a clue what.
Fixes: lp:1836903
* https://bugs.launchpad.net/kicad/+bug/1836903
2019-07-26 12:21:24 -06:00
79934a327e
Implement shoving of free vias.
...
Also contains a little bit of cleanup and a lot of commenting.
Fixes: lp:1833216
* https://bugs.launchpad.net/kicad/+bug/1833216
Fixes: lp:1833214
* https://bugs.launchpad.net/kicad/+bug/1833214
2019-07-24 09:33:47 -06:00
a7c41f0c34
Renaming for clarity. Unqualified "push" could mean push-n-shove, or it could mean push/pop.
2019-07-24 09:33:47 -06:00
c1fcb1d895
Allow shoving and springback when dragging vias (either connected or free).
...
Fixes: lp:1833216
* https://bugs.launchpad.net/kicad/+bug/1833216
2019-07-24 09:33:47 -06:00
8c77d31d4d
Simplification in prep for fixing some via dragging issues.
...
There should be no change in logic with this commit.
2019-07-24 09:33:47 -06:00
aa4d7682ca
Don't shove stitching vias.
...
Whether or not it's a good idea, the current algorithm doesn't support
it and leaves them on top of each other.
Fixes: lp:1833214
* https://bugs.launchpad.net/kicad/+bug/1833214
2019-07-21 16:38:06 -06:00
6f44b00b2c
Add support for hole collisions to PNS.
2019-07-21 16:38:06 -06:00
b79d2d9258
Cleanup.
2019-07-21 16:38:06 -06:00
bacbe86756
pcbnew: Make clearance translucent
...
This sets the clearance outline to a slightly better opacity to allow
viewing of items behind the routed track clearance. Future work should
include making this a configuration option.
Fixes: lp:1826719
* https://bugs.launchpad.net/kicad/+bug/1826719
(cherry picked from commit e0589d2908
2019-07-18 10:47:27 -07:00
Jon Evans
Jeff Young
jean-pierre charras
Roberto Fernandez Bautista
luz paz
Marek Roszko
Seth Hillbrand
Tomasz Wlostowski
Ian McInerney
david-beinder
Jonathan Haas
Thomas Pointhuber
Wayne Stambaugh
Mikołaj Wielgus
Dominik Wernberger
hoijui
Peter Montgomery
qu1ck
Michael Kavanagh
PJM
Fabien Corona
Seth Hillbrand