Found via `codespell -q 3 -S *.po,./thirdparty -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,dout,einstance,modul,ot,overide,serie,te,,tesselate,tesselator,tht`
1) Fix a couple of bugs in case processing
2) Make case processing more explicit to prevent more (1)
3) Move label processing to AltiumSpecialStringsToKiCadVariables
4) Strip double-quotes from special strings (and add test cases)
5) Change PROJECTNAME to just filename, not full path
6) PROJECTREV and REVISION are two different things
7) Add support for Altium's Application_BuildNumber
8) Fix some issues in trimming spaces around special strings
ADDED CURRENT_DATE titleblock token (to go with existing ISSUE_DATE)
ADDED PROJECTNAME schematic token (to go with FILENAME and SHEETNAME)
Converts other parameters to project text variables.
wxWidgets drives some of this problem, it blindly calls SetValue and invokes the win32 update position messages on all the scroll subevents and we end up fighting it as well by inserting the rounded position on each subevent rather than the final one
Also fixes a bug where an empty window would get left when loading
a file from the KiCad manager window errored out.
Also fixes a bug where we were getting the wrong exception because
we were rethrowing the type-casted one (rather than just calling
throw).
Fixes https://gitlab.com/kicad/code/kicad/issues/8604
It's tempting to say that we don't need to exclude filename chars
from symbols, but we might regret that decision down the road. Better
to just escape them.
Fixes https://gitlab.com/kicad/code/kicad/issues/8694
This allows us to avoid the monospaced font (along with the tab-stop
handling), and process a <return> as an OK rather than just <shift> +
<return>.
Fixes https://gitlab.com/kicad/code/kicad/issues/8425
(The current one keeps pulling the Kicad Manager window to the front
on OSX.)
I also removed the UpdateUI stuff which was probably causing:
Fixes https://gitlab.com/kicad/code/kicad/issues/5049
wxString::Format is redundant in a wxLogXXX call.
Error messages should generally be translatable.
Error messages should use generally consistent sentence forms.
- On wxGTK version < 3.1, the filename must be quoted if containing spaces,
and can be always quoted.
- On wxGTK version >= 3.1, the filename must *never* be quoted because
a quoted filename breaks wxLaunchDefaultApplication().
Fixes#8670https://gitlab.com/kicad/code/kicad/issues/8670
The max-char-width impl was buggy and never applied to PCBNew anyway.
Plus the stroke font has a max-char-width of 2.8 time the space width,
so it made for really wide tab spacing.
Also fixes a bug where the Scintilla editors weren't getting a
monospace font on Mac. (This bug may also exist on the other
platforms, but each would need its own fix.)
Also moves more of the Scintalla customizations to SCINTILLA_TRICKS
where they can be shared.
Fixes https://gitlab.com/kicad/code/kicad/issues/8666
We lock the project file, board, and schematic now, so the second copy
can only open them read-only. While issues might remain, it's unclear
the warning ever prevented anyone from shooting themselves in the foot
anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/7465
It's not clear that it's normal platform behaviour, and some GTK
window managers fail to non draw the selection in inactive text
boxes.
Fixes https://gitlab.com/kicad/code/kicad/issues/8197
It's fair to assume all libcurl versions in circulation will already be
using OpenSSL>=1.1.0. This code is also unnecessary on platforms that
use other libcurl SSL backends, such as Debian's libcurl-gnutls package.
- Remove outdated y-offset that prevented restoring full-height
(client area returned by wx is correct these days)
- Clamp frame geometry to fit new display when display is changed
- Handle when an automatic window reposition causes a DPI change
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8341
This prevents restoring perfectly-valid screen locations, and
I'm not sure what problem it is trying to solve (it's already
disabled on Windows, and this is confirmed to mess up restoring
locations on Mac/Linux).
If this was actually fixing a problem, the fix needs to be more
targeted, but since I don't know what the problem was, I'm just
going to take it out for now and wait for a potential problem
to pop up again.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8595
Reduce each (Accel & Fallback) to 3 options: Off, Fast, Good. Fast AA
in accelerated canvas uses SMAA with tweaks suggested by David Beinder.
Good AA is super-sampled x2.
Cairo is similarly reduced to Off, Fast, Good, which map to the Cairo
options themselves. Best is removed as it mostly affects text rendering
and not line drawing (as our text is)
The same logic block to resolve possible symlinks exists in 5 different
places now. This change moves this duplicated code to a static member
function of WX_FILENAME instead.
Moves the OpenGL AA options to the same Fast/Balanced/HQ options as used
in Fallback. Fast and Balanced are the SMAA options, with decreasing
threshholds and more processing in the balanced version. HQ is
supersampling x2. This takes more memory and may not work for HiDPI
screens with underpowered graphics cards. But it looks the best of the
three options.
The SSx4 option is removed as it added little benefit in either regular
or HiDPI screens
Fixes https://gitlab.com/kicad/code/kicad/issues/5196
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8522
Conservative makes SMAA usable in Eeschema through weaker AA.
Aggressive reduces some artifacts compared to the High preset.
Restores the unused Ultra preset in the shader source to its original state.
When running headless, e.g. from Python script, the wxApp has not be
instantiated, so we cannot use wxConfig. In this case, we fall back to
the class defaults in ADVANCED_CONFIG()
Avoid fractional pixel offsets by forcing integer division of m_screenSize.
Shift rounded lookAtPoint onto OpenGL pixel center to ensure consistent rounding to int.
The pixel 0..1 @ 1x needs to fill the area 0..2 @ 2x so its center moves by 0.5 * (pixel size @ 1x).
This was leaking windows headers and partial wx headers to 1084 compilation units......
This also means math/util.h is leaking to 1084 compilation units which seems a bit high too.
This involved adding some extra infrastructure to be able
to handle the case where a track that is sitting in the
router's commit waiting to be added to the board actually
needs to be deleted instead.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8419
ZIP archives may have entries that are only directories. We should not
try to extract this entries (they have no length); instead, we merely
create the path and continue
Differentiates better between the EDA_ITEM IsModified(), referring to
items themselves changing and the EDA_SCREEN IsContentModified(),
referring to whether we have made any unsaved changes.
Initialized COLOR4D takes an EDA_COLOR_T enum but then referenced it as
an index to the color table. This uses the enum as comparison against
the table-stored enum.
Adds standard orange to picker swatches
* Remove unused wxLogDebug calls.
* Add add application level character tracing to detect unhandled key
events.
* Catch unhandled exceptions in KiCad main event loop like single top
applications.
ADDED Paste Special... action in pcbnew
CHANGED Additional options for Paste Special... in eeschema, including
"Assign unique reference designators to pasted instance"
Note: PGM_BASE::InitPgm() is creating a SETTINGS_MANAGER object, which
in turn tries to display a "migrate settings" dialog when no settings
are found, but obviously the dialog can't be displayed inside docker.
Needed to add an optional parameter to InitPgm() in order to allow
running in headless mode.
Save sheet and symbol instance information to the clipboard on copy
Load sheet and symbol instance information from the clipboard on paste
and renumber page numbers after loading.
Correctly handle pasting in a multiple hierarchy by ensuring symbol and
sheet instances are updated for all instances of the destination sheet.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8207
The editor has an entry to set a comment associated to a graphic item.
It is only for the designer, but the code to save it in .wks file when not empty was missing.
The code to read it exists since the beginning, so no change in file format
CHANGED: Environment variables defined outside of KiCad will no longer
be saved in the settings file. Paths can be configured via
the Configure Paths dialog and those changes will be saved in
the settings file if the new path is different from the default
and the path variable was not defined in the system environment.
wx/wx.h includes all wxWidgets .h files, and sometimes creates collision
names in #define between kicad and windows headers
Moreover, blindly including a lot of useless files is compil time consuming
Windows doesnt need an ambiguous "screen border region" defined in percent, it's an absolute area given in pixels
Also we need to check the top corner y value to the ClientArea returned from the wxDisplay, in the situation the task bar is on top.
Fix#7850
In case the documentation and help files from kicad-doc are not
installed or are located in a folder where KiCad cannot find them, an
info dialog is shown offering the user the option to access the online
help system instead.
Fixes https://gitlab.com/kicad/code/kicad/issues/2142
On Linux, the documentation and help files are potentially installed to
a non-standard location (i.e., outside of /usr/share/doc/kicad/). This
can be the case when, e.g., multiple versions of KiCad are installed in
parallel. Making KICAD_DOCS available at run-time is the only viable
solution to allow the applications to find the help files in this case.
Fixes https://gitlab.com/kicad/code/kicad/issues/7874
Rely on existing code to initialise the list of paths in which the KiCad
documentation might be located, thereby making SearchHelpFileFullPath
platform-agnostic and easier to read.
On MSW, CaptureMouse() was sometimes called event if the GAL panel has
captured the mouse (that was not accepted by wxMSW), although HasCapture()
returns false.
(Perhaps some race condition between events)
The fix add a flag to avoid calling twice CaptureMouse() after only one
wxEVT_MOUSE_CAPTURE_LOST event was received.
Fixes#8239https://gitlab.com/kicad/code/kicad/issues/8239
Keeping them in base_units means that we can't introduce
any dependence on these functions to anything that needs to
compile without one of the unit defines (EESCHEMA, PCBNEW, etc)
This function is used in UNIT_BINDER, that does not accept floating notation
with exponent, that can be generated by parseSetResult().
As a result: values < 0.0001 cannot be entered in a UNIT_BINDER.
Introduce a new advanced config variable `KICAD_LIBRARY_DATA` which can
be used to move templates, symbols, footprints, and 3dmodels out of
`KICAD_DATA`. If not defined, everything is kept as before.
To facilitate this, PATHS::GetStockEDALibraryPath() is added. This
allows to differentiate code paths looking for EDA library data vs. code
paths looking for plugins, demos, and the like.
Thanks to Aimylios for the hints and suggestions with regards to the
stock EDA library data path handling on Windows and MacOS.
VIEW::GetBoundary() returns the entire view area, not the visible area.
Surprisingly, we had no API for this, so I added one.
Also, changed the dragger behavior to toggle between optimizing just the
modified area and optimizing the visible area, i.e. we will now never
optimize off-screen portions of the dragged track.
Use the connecting straight tracks even if not exactly parallel - allow
an error margin configurable in ADVANCED_CFG (default 1 degree). Also
be less strict about end point matching and use the width of the track
as the criteria to determine suitability.
Finally, delete any short lengths of track at the end of the operation
and amend the arc end points to keep connectivity.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7967
The native cursor must be set on the GAL canvas wx object,
not its frame (otherwise on GTK the cursor is only set
when we get a request for it from the WM and not immediately).
Fixes https://gitlab.com/kicad/code/kicad/issues/6421
Before, it was possible for the canvas to steal the
focus if the cursor was only moved over it and not
clicked. Now, the canvas will only take the focus if
the frame is active.
Fixes https://gitlab.com/kicad/code/kicad/issues/7233
This is under the supposition that we can't set the column widths
on some Mac instances because the host controls haven't yet been
created. This is primarily conjecture based on looking at things
that have the *possibility* of going wrong. Why this only happens
in some installs is beyond me.
Fixes https://gitlab.com/kicad/code/kicad/issues/5479
After commit 9535153f9e there were no more IDs inside the legacy ID
system. Therefore the entire system for dispatching and looking up
the legacy ideas and handling those events can now be removed and
the tool dispatcher simplified (it no longer needs to know about
the ACTIONS class).
We don't have a migration handler that can resolve conflicts
and tell the difference between hotkey changes that KiCad made
that we want users to adapt to, and hotkey changes made by the
user.
So, the least-bad option for 6.0 is to just not migrate old
hotkey config files.
See https://gitlab.com/kicad/code/kicad/-/issues/7816
This is hidden behind an advanced configuration setting and is primarily
useful for developers trying to troubleshoot the netlist payload sent
from the board editor to the schematic editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/8051
Saying "Import/Export" on the labels when the submenu has "Import"
or "Export" in it is redundant.
Note that we can't just update the action text with the new name,
because that is used in the hotkey list and would become too confusing
without the "Import"/"Export" text.
Before, the layers were always ellipsized if the name was >30
characters, even if the widget was wide enough to display
the full name. Now they are ellipsized when needed (e.g. if
the widget is shrunk small enough).
Fixes https://gitlab.com/kicad/code/kicad/issues/1919
The text areas aren't always redrawn when the window is activated
or deactivated, so we need to force a refresh of the text to ensure
it is the correct font color.
This allows for color changes and scaling of the arrow
when the display needs it (e.g. HiDPI displays).
Also make the arrow and text respond to if the window is
active to mimic native controls.
Fixes https://gitlab.com/kicad/code/kicad/issues/6042
When the window is not active, the status bar uses disabled text,
so the message panel sticks out because it is then using a different
text color. This is most noticable in dark mode.
Action plugin authors can specify alternative icon path for dark theme.
If it's not specified then standard icon will be used for both light and
dark themes. If neither icon is specified then the default puzzle piece
icon is used.
Fixes#7984
The first phase is for the environment before the OS
apps are created, and the second phase is for after
the OS app is created but before all of our processing.
Fixes https://gitlab.com/kicad/code/kicad/issues/7992
Use the KICAD_DATA build-time variable to determine the default stock
library search path on Linux instead of relying on DEFAULT_INSTALL_PATH
in combination with hardcoded folder names. The search logic for Windows
and macOS is refactored but remains unchanged.
It is not always useful to distinguish between the cases when KiCad is
run from the build or the installation directory. E.g., the libraries
are generally not available in the same path as the code. Make the
evaluation of KICAD_RUN_FROM_BUILD_DIR conditional to accomodate these
scenarios.
1) Accept <enter> as OK if the multiline textbox isn't shown.
2) Focus and select all in first control if multiline textbox isn't shown.
3) Make title be title caps ("Edit Sheet name Field" looked dorky).
Fixes https://gitlab.com/kicad/code/kicad/issues/7940
If we keep doing design validations at two different places, they can
only start to drift apart. Board Setup should validate for malformed
data ONLY; everything else is the business of DRC.
This also fixes a bug where implementation validations would not allow
OK in the dialog, but wouldn't put up a message to say why. We now use
the InfoBar impl from Jon's commit for that.
Bitmaps are now identified by an enum class instead of by pointers.
Bitmap loading and caching is now handled by a class in common, and
we no longer compile most bitmaps into the binary, so there is no
longer a bitmaps static library.
Instead, bitmaps are archived to a .tar.gz file which is installed
in ${KICAD_DATA}/resources/images.tar.gz
The source PNGs are checked in to Git as the original CPP files were,
so that people can build without the required dependencies to convert
SVGs to PNGs.
Initial support is also added for dark theme icons, although this
is not yet exposed in the GUI.
Stubs are present for multi-resolution image resources, but this is
not fully-baked yet and could use some refinement.
Updates the Serbian language code from sr_RS to sr. This appears to
work as intended under Debian whereas the full code, despite existing in
the i18n directory was not recognized by wxWidgets or Weblate.
When updating the libtree, we modify the tree multiple times to avoid
crashes on Linux. These generated events that buffered while the widget
was frozen and resulted in redrawing the same footprint 4-10x.
This reduces the buffering by discarding events that are generated
during the freeze and only redrawing when there is a new footprint to
draw
CHANGED: If the user selected a footprint and then invoked drag from the
RMB menu, the footprint would warp to the mouse center (if set in
preferences) instead of the mouse warping to the footprint center.
There was a call to 'WarpCursor' that was coming after the menu had been
closed and the mouse had already warped to the footprint center. This made
the footprint jump instead to the old mouse position.
This MR removes the call to 'WarpMouse' and prevents the footprint
from warping to the mouse.
Fixes https://gitlab.com/kicad/code/kicad/issues/7680
The move tool can stack on others, so when we re-enter the previous tool
this caused another immediate action. We flag re-entry in the tool
stack to check for this and avoid unexpected tool starts
Previous assumption of 100mil grid in CADSTAR schematic designs has
been proven to be incorrect. Let's use the "working grid" in the
original design instead.
- Rename member variable names to use the 'm_' prefix
- Rename a few object types that clashed with KiCad object names, such
as BOARD and SCHEMATIC, to avoid the use of '::' to access the KiCad
objects.
- Remove some unused code.
Vertex memory allocation uses malloc and realloc without checking the
result. Throw exceptions that can be caught in the DoRepaint() method
in EDA_DRAW_PANEL_GAL when malloc and realloc return a null pointer.
Add a reset button that will only show up if the user
edits the JSON configuration for grids. This is a temporary
measure until we have a real grid editor GUI in V7.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7595
- remove ${COMMENT0}, that was broken (returned the same as ${COMPANY}.
- So ${COMMENT1} to ${COMMENT9} are only recognized for Comment1 to Comment9
in page settings dlg, and are equivalent to our old %C0 to %C8 format string
- fix a minor coding style issue.
Fixes#7642https://gitlab.com/kicad/code/kicad/issues/7642
- Make DIALOG_SHIM::SetPosition working)
- rename PCB_BASE_FRAME::SelectLayer() to PCB_BASE_FRAME::SelectOneLayer()
- PCB_BASE_FRAME::SelectOneLayer(): make dismiss dialog by escape key working.
Fixes#7578https://gitlab.com/kicad/code/kicad/issues/7578
When switching schematics that causes an error message (for example if
the schematic needs repair), wx can refresh in between view updates,
leading to a null preview.
On mac, the backspace key is commonly used from removing items. The
forward delete key doesn't really exist (it is hidden behind
fn-backspace), so this modifies our common use of delete. The
context-dependent usage in router and polygon creation are unaffected as
CONTEXT overrides GLOBAL when processing
* Fix multi line text alignment.
* Parse schematic frame objects and convert them to lines.
* Make implicit global labels normal size so they can easily be seen.
* Move sheet fields to a more sensible position.
* Parse schematic symbol instances before wires so that the implicit power
connections can properly be tested. This will be used at a later time.
* Scale label text size down to allow for differences in label offset and
graphical items.
For some kinds of issues, we want a way to point them out but
we don't need to keep the user from being able to close the
dialog. A separate Validate button lets the user check for
issues if desired, but these issues are not "fatal" and can
be ignored if the user wishes.
The automatic wire tool was not working in the gridless mode because the
grid snapping on/off logic present in `EE_GRID_HELPER`, based on the
value of `m_enableGrid`, was not taking into account that another check,
but for the global KiCad setting, would be performed in the `Align()`
method, which is inherited from `GRID_HELPER`.
I've modified all tests of `m_enableGrid` value to also take the global
setting into account, and moved checks for it to `Align()` method, as
it's more consistent this way.
I've also removed an override of the `Align()` method in the
`PCB_GRID_HELPER` class, as it was made redundant by my changes.
Fixes https://gitlab.com/kicad/code/kicad/issues/7402
Use terminal pin number (i.e. from the symbol definition) when the pin
number is undefined in the part.
This fixes a bug that resulted in symbols with "0" as the pin numbers.
- Load Fields in the library items as well as schematic instances
- Remove invalid characters (e.g. '\n', '\t', '\r') in fields
- Load footprint field (assume that the footprint library name
is the same as the filename of the schematic)
We don't use e-mail addresses for contributors in the about box these
days. The field is re-purposed as an optional additional field to allow
for disambiguation of contributors, should they request it.
We had been using each 4th column of spaces. But we needed an absolute
spacing rather than relative to the existing text to match spacing
between the input text box and our stroke font
Can happen if someone hammers away on the probe and/or tune tools
without ever mousing over the schematic in between.
*May* fix the below bug.
Fixes https://gitlab.com/kicad/code/kicad/issues/6876
david-beinder
luz paz
jean-pierre charras
Marek Roszko
Jeff Young
Wayne Stambaugh
Jon Evans
Mikolaj Wielgus
Thomas Pointhuber
Érico Nogueira
Michal Schulz
Seth Hillbrand
luz paz
Johannes Maibaum
Ian McInerney
Dominik Sliwa
Hajo Nils Krabbenhöft
Tomasz Wlostowski
Roberto Fernandez Bautista
Hanya
Marcus A. Romer
Jonathan Haas
Carsten Schoenert
qu1ck
Dominik Wernberger
Konstantin Baranovskiy
PJM
Adam Wolf
Tokita, Hiroshi
Zoltan Gyarmati
Simon Richter
Michael Kavanagh