in most of files, including wx.h is not necessary, when only 2 or 3 wx files must be included.
Moreover, on windows, including wx.h sometimes create compil warnings about
shadowed vars defined in some specific windows headers.
This is a board file format change to account for the new properties.
Also, we now only store the critical information about the dimension's
geometry in the board, rather than storing every drawn line.
The DIMENSION object is now an abstract base, and ALIGNED_DIMENSION
is the implementation that exists today (we will add more dimension
types in the future)
1) For a while now we've been using a calculated seg count from a given
maxError, and a correction factor to push the radius out so that all
the error is outside the arc/circle. However, the second calculation
(which pre-dates the first) is pretty much just the inverse of the first
(and yields nothing more than maxError back). This is particularly
sub-optimal given the cost of trig functions.
2) There are a lot of old optimizations to reduce segcounts in certain
situations, someting that our error-based calculation compensates for
anyway. (Smaller radii need fewer segments to meet the maxError
condition.) But perhaps more importantly we now surface maxError in the
UI and we don't really want to call it "Max deviation except when it's
not".
3) We were also clamping the segCount twice: once in the calculation
routine and once in most of it's callers. Furthermore, the caller
clamping was inconsistent (both in being done and in the clamping
value). We now clamp only in the calculation routine.
4) There's no reason to use the correction factors in the 3Dviewer;
it's just a visualization and whether the polygonization error is
inside or outside the shape isn't really material.
5) The arc-correction-disabling stuff (used for solder mask layer) was
somewhat fragile in that it depended on the caller to turn it back on
afterwards. It's now only exposed as a RAII object which automatically
cleans up when it goes out of scope.
6) There were also bugs in a couple of the polygonization routines where
we'd accumulate round-off error in adding up the segments and end up with
an overly long last segment (which of course would voilate the error
max). This was the cause of the linked bug and also some issues with vias
that we had fudged in the past with extra clearance.
Fixes https://gitlab.com/kicad/code/kicad/issues/5567
Partititioning small polygons causes excessive partitions when we use a
fixed number of cells per side. Partitioning by size keeps the
partition count limited and speeds the calculations.
Also adds an option to not partition the grid for elements (like 3d
raytracing) that do not need it.
Fixes https://gitlab.com/kicad/code/kicad/issues/5579
... instead of modifying the argument.
This will make the method usable in python API and will not incur
permormance penalty because named return value optimization (NRVO)
is a thing since C++11.
But even if copy is not elided vector is moved instead of copied.
https://en.cppreference.com/w/cpp/language/copy_elision
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.
There is still some debugging output in test code that really needs to
be moved into a unit test.
Add debugging output section to the coding policy regarding debugging
output.
This allows for the tool framework to keep track of a universal
set of conditions for the UI state (enabled/checked/shown) for
controls of actions. It removes the need for the main menubar
menus to be CONDITIONAL_MENUs and be rebuilt on each open,
and instead makes the updates of the check and enabling of
items handled in the native wxWidgets way.
This commit switchs the 3d viewer and kicad project manager window
over to this system.
Remove some hacks related to postprocessing (not need now because the
previous postprocessing improvements, light parametrization could be
used for tune or future parameters could be implemented)
This introduces layer handling to a lot of the geometry routines.
Many of them don't do much with it now, but it does help multi-layer
zones and will help when padstacks are implemented.
KiCad stores 3D cache files but never gets rid of any of them.
This patch adds a new function called 'CleanCacheDir()'. Any cache
files older than the passed 'number of days' parameter are deleted.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1928
Implement blur based on depth weights.
Improve occlusion based on direct light/shadow it receives.
Improve occlusion mixing with the final color by using multiply instead
of subtract.
Remove debug and test code.
Swap syncs can limit the redraw rate as the screen waits for previously
issued syncs. Setting this to -1 allows for adaptive swapping
(resorting to unsynced if it falls behind) if it is supported by the
card but will fall back to unsynced (0) if the adaptive is not
supported.
Fixes https://gitlab.com/kicad/code/kicad/issues/4226
Various architecture upgrades to support this.
Creating a BOARD now requires a valid PROJECT, which caused
some (mostly transparent) changes to the Python API internals.
ADDED: Project local settings file
CHANGED: Board design settings are no longer stored in PCB file
CHANGED: Net classes are no longer stored in PCB file
CHANGED: Importing board settings now reads boards, not just projects
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2578
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4070
There were a lot of plotters, exporters, etc. that were rolling their
own implementations.
This also introduces a lazily-built set of SHAPE objects for doing
collision detection and some forms of rendering (and later DRC).
Dragging filled zones in OpenGL was extremely slow due to the
invalidated triangulation cache. Moving the zone should also move the
triangles and keep the cache valid.
It's currently only supported in the Footprint Editor. It could be
easily added to the board editor (all the code is there), but the board
editor is a little short on room in the drawing tools toolbar.
A note to developers, please do not set the minimum and/or size of bitmap
buttons. It causes bitmaps to get clipped using GTK on Linux. If the
bitmap button size is not acceptable, then supply an appropriately sized
bitmap rather than attempt to force the wxWidgets sizing mechanism to do
what you want. This almost always causes platform differences that do
not work well.
You can now choose the behavior of dragging with the
middle and right mouse buttons.
You can also choose which modifier keys to use for
panning and zooming with the scroll wheel or trackpad.
You can also customize the zoom speed, which makes
it possible to have a good zoom experience on a wider
range of input devices.
You can also now zoom by dragging with the right or
middle button if desired.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/3885
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4348
* Push all sizing operations into EDA_BASE_FRAME
* Save the unmaximized window size when maximizing
so that we can then save it in the config if the
window is maximized. Otherwise the config ends up
with the maximized size saved, and weird behavior
occurs when unmaximizing on the next opening.
* Use GL vertex buffers and index buffers for 3D model rendering
* Use material or average vertex color for bounding boxes instead of red
* Reinstate bounding box rendering with GL vertex/index buffers
* Use compact vertex/index data representation
- 8-bit normals
- 8-bit colors
- 16-bit or 32-bit indices, depending on model size
This should improve performance a bit on lower end GPUs with less memory
and bandwidth.
Fixes#4112
Move the camera out to its own so that everything else is board-
related, and then rename BOARD_ADAPTER.
At some point the flags should probably be moved out too, and they
can have the EDA_3D_SETTINGS name.
Replace SEVERITY_ERROR by RPT_SEVERITY_ERROR to avoid collision with a system definition.
Replace other SEVERITY_XXX by RPT_SEVERITY_XX for consistency.
Fix compil warnings and some other compil issues.
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme
Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
Previously, OnModify() was called for a lot of items, even when not modified.
For large schematics, the calculation time was unreasonable ( several minutes)
It is now called only a few times.
Remove holes on Silk layer by default so the behaviour is the same
on OpenGL and Raytracing.
Fixes#1836
Fix raytracing shadow offset issue.
Some codestyle fix.
Remove the CACHE_WRAPPER whose sole purpose was to allow the
cache to be stored in the project, and instead just have the cache
inherit the proper class.
Rotating to 0 when above pi would result in the board spinning back
through pi to get there. This led to jarring motion.
Also fix an issue added in b6f64815 where the board would rotate
2pi when crossing over the 0-2pi boundary.
* Split up the thirdparty code into the thirdparty folder (#3637)
* Create a new kimath static library containing all the math functions
This is part of cleaning the build system for #1906.
The 3d viewer is the last component to not use the action framework, so
we descope the common defines to its canvas. Once the 3d viewer is
converted, we can remove these entirely.
Jeff Young
jean-pierre charras
Mario Luzeiro
Ian McInerney
Seth Hillbrand
Jon Evans
qu1ck
Wayne Stambaugh
Peter Montgomery
Tomasz Wlostowski
Joshua Redstone
Electro707
Érico Rolim
Simon Richter
Emery Burhan
Oleg Endo
Fabien Corona
Mark Roszko
Michal Jahelka