de5980b92e
Share more of the courtyard collision highlighting code.
2022-10-14 10:42:07 +01:00
11dc5424cb
Pull interactive courtyard checker out of move tool to share with router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-14 00:48:37 +01:00
098e96f1c7
Use more precise formatting in DRC messages when less precise values are identical.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12587
2022-10-06 22:18:53 +01:00
9119b5072a
Respect DRCEpsilon in diff-pair coupling test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12587
2022-10-06 22:18:53 +01:00
d6c7f46842
Formatting.
2022-10-06 22:18:53 +01:00
6927e75eae
Handle keepout areas with holes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12581
2022-10-06 15:08:56 +01:00
b4f3390626
Drill size is absolute
...
Use hole plating size for visibility only, not zone filling, routing or
DRC
2022-10-04 09:52:40 -07:00
e49de68a59
Implement a more durable zone bounding box caching strategy.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10821
2022-10-01 22:10:43 +01:00
d67437a2aa
Move ratsnest exclusion processing to a post-pass.
...
Also fixes a few cases where we were unnecessarily rebuilding
connectivity more than once for an operation.
2022-09-29 17:08:49 +01:00
503385f52e
Don't use FindNamedPad for net-tie logic. It only reutrns the *first*
...
pad of a given number.
Also improves other DRC logic to tighten up the net-tie rules now that
we know which pads are allowed to short with which other pads.
Also removes the "Overlapping pads" DRC violation now that we know
whether or not overlapping pads in a net-tie footprint constitute a
short.
Fixes https://gitlab.com/kicad/code/kicad/issues/12506
2022-09-25 17:38:31 +01:00
0150655ed3
Fix missing DRC check with via
...
When the via is first and not second in our ordering, the hole-copper
clearance was not checked as the track did not have a hole.
We also calculated the NPTH-via clearance incorrectly in the inspector
2022-09-20 13:43:01 -07:00
64a6fc0fd4
Push UNITS_PROVIDER down into a low-level mixin.
...
This allows us to also construct cheap UNIT_PROVIDERs for specific
tasks when necessary.
2022-09-19 17:10:59 +01:00
45d6b4a9fc
Readability improvements.
2022-09-19 11:18:20 +01:00
3d5913c825
Remove convert_to_biu.h, merge contents to base_units.h
2022-09-16 21:09:28 -04:00
e6ed275c25
Repoint IU_PER_MILS
2022-09-16 21:09:26 -04:00
a8613ee80f
Combine Iu2Millimeter & remove PcbMm2iu
2022-09-16 21:09:26 -04:00
b00178adb3
Nuke base_units from orbit
2022-09-16 04:38:10 +00:00
78acb4f07f
Fix unintentional typo
2022-09-14 15:14:35 -07:00
26a1114e3c
Avoid Yields when the results are ready
...
We always need to check for calculation results before yielding the
system otherwise we will delay outcomes
Fixes https://gitlab.com/kicad/code/kicad/issues/12228
2022-09-14 13:30:04 -07:00
0df1786456
Improve adherecne to ignored tests.
2022-09-11 19:48:08 +01:00
3534cfbba8
Allow a single net collision with a free pad.
2022-09-06 13:59:52 +01:00
c0ba1b35bf
Remove SMD pad side sanity check.
2022-09-05 10:41:37 +01:00
d5cf7828fa
ADDED footprint checks for SMD pad consistency.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11736
2022-09-04 10:34:32 +01:00
854acd4c77
Null-ptr safety for diff-pair-coupling test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12329
2022-09-02 00:49:33 +01:00
9188838e50
RIP EDA_RECT.
2022-08-31 23:57:24 +01:00
b4492e0bd2
More EDA_RECE yeetage.
2022-08-31 17:19:50 +01:00
2dc6300501
Move EDA_ITEM bounding boxes to BOX2I.
2022-08-31 10:16:55 +01:00
b736460e71
Move optional access from value() to *operator
...
`value()` throws. Where we check for existence, we don't need to use
the throwing version and should just use the unprotected variant
2022-08-30 13:59:39 -07:00
2d68cdff94
Better reporting of hole-to-hole clearances and clearance resolutions.
2022-08-29 17:37:49 +01:00
e0f6a6e475
Run hole-to-hole checks on Edge_Cuts layer.
...
Also makes the flashing logic inside PAD::GetEffectiveShape() easier
to understand.
Fixes https://gitlab.com/kicad/code/kicad/issues/12296
2022-08-29 17:37:49 +01:00
667a54ad86
Retire insideArea in favour of intersectsArea and enclosedByArea.
2022-08-28 18:02:41 +01:00
06786c34d7
Blacklist hashes for 2d integer elements
...
The hash table for integer hashes is extremely limited and places most
elements in the same buckets. This leads to a linear search time for
structures built on this.
This blocks hashes, directing the coder to utilize std::set or std::map
structures instead of hash tables for implementing integer-based
lookups.
2022-08-26 08:43:37 -07:00
1a672aba56
Fix a couple of DRC bugs where the bbox wasn't inflated for largestClearance.
...
Also removes a case of double-testing a pad with a non-plated hole.
2022-08-26 13:22:57 +01:00
909358e643
Make sure pair caches are layer-specific where they need to be.
2022-08-26 13:22:57 +01:00
86944c4f9f
Marginal performance improvements.
2022-08-26 13:22:57 +01:00
f1261e71d4
Replace boost::optional with std::optional
2022-08-25 15:50:47 -07:00
792d7babe3
Performance (std::map -> std::unordered_map) and commenting.
2022-08-22 12:43:57 +01:00
46df421064
ADDED defined pad groups for net-tie footprints
...
Each pad group is allowed to short nets with other pads in its group.
Legacy footprints with the "net tie" keyword hack will get a single
group auto-created with all the footprint's pads in it.
DRC and the router now allow a track to collide with copper graphic items
while entering a net-tie pad as long as the closest point in the collision
is within the pad.
DRC (and the footprint checker) now check for copper items in the
footprint shorting pads which are not in the same pad group.
Fixes https://gitlab.com/kicad/code/kicad/issues/2265
2022-08-19 18:54:20 +01:00
3a718385cf
Just match the type to the comparison type on second thought
2022-08-18 22:22:04 -04:00
675938375b
Use a larger data type for min_dist
...
Squared norms are massive and can logically exceed 32-bit ints
2022-08-18 22:19:36 -04:00
b9461f2ba7
Re-enable tests for zones
...
Avoid invalid substantial checks triggered by signed floating point
zeros. Adds a QA check to ensure zone-self checks are maintained
2022-08-18 17:06:29 -07:00
35ac39844f
Clean up some auto usage
...
Don't make new copies of shared_ptr if we can use references. Keep auto
usage down to hard-to-type-out sequences
2022-08-15 11:29:45 -07:00
1f347582f8
Introduce new marker type so we can track DRC errors on the drawing sheet.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12221
2022-08-15 18:03:03 +01:00
86938aa425
Read, write and process the board-wide Allow soldermask bridges in FPs.
2022-08-14 22:56:29 +01:00
a9536b5de9
CHANGED netclass assignments now done via canvas or via patterns.
2022-08-14 22:56:29 +01:00
a11f48ef10
Markers provider is no longer responsible for all markers.
...
Unconnected items and schematic partity violations are also now
represented by markers, so the ERC/DRC window itself needs to do
the deep-delete.
Fixes https://gitlab.com/kicad/code/kicad/issues/12182
2022-08-08 22:02:20 +01:00
015bde8cb0
Test pad:hole violations in footprints as long as not same pad number.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12124
2022-08-07 19:49:39 +01:00
96f01d33c8
Performance improvements.
...
1) Move a bunch of std::map's to std::unordered_map to get constant-time
look-ups
2) Lengthen progress-reporting intervals to spend more time doing work
and less time talking about it
3) Reverse order of SHAPE_LINE_CHAINs in thermal intersection checks to
make (much) better use of bbox caches
4) Don't re-generate bboxes we already have
5) Fix some autos that weren't by reference (and were therefore copying
large datasets)
6) Rename delta progressDelta so it's easier to search for in future
7) Get rid of a few more autos (because I don't like them)
8) Pass large items to lambdas by reference
Fixes https://gitlab.com/kicad/code/kicad/issues/12130
2022-08-03 11:59:42 +01:00
9a4136de00
Implement annular ring checking for pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12109
2022-08-01 17:45:34 +01:00
f3936f24ae
Go back to single-threaded sliver checker.
...
Something was unhappy with the multi-threaded version.
(Note that we still multi-thread the polygon-building, which is the
most expensive part.)
2022-08-01 17:45:34 +01:00
7556d7152f
Fix errant return and improve progress reporting.
2022-08-01 13:09:51 +01:00
43df863df2
Fix issue with caches not being initialized when printing msg bar.
2022-08-01 13:09:51 +01:00
0304ad4494
Move connection width testing to rule system.
...
Also copies connection width progress reporting architecture over to
the sliver checker.
2022-08-01 13:09:51 +01:00
f2f04b1d20
Better progress reporting for thermal connections.
2022-08-01 13:09:51 +01:00
b0a9cea6f6
Better progress reporting, and don't report necks that don't have items.
...
Since we aren't searching zones (they aren't in the m_CopperItemRTreeCache)
this will drop all errors that are zone-only (which are better handled by
zone-min-width).
2022-08-01 13:09:51 +01:00
54213bb7f1
Cleanup and move to DRC_ENGINE's status reporter.
...
1) brace formatting
2) get rid of some autos
3) get rid of a dyn_cast that CLion claims is bad
4) use DRC_ENGINE's status reporter
2022-08-01 13:09:51 +01:00
bf5e649e44
Fix log errors in new solder masking checking code.
2022-07-23 09:26:04 +01:00
f41af10007
Clean up hole shapes for safety (smart pointer) and consistency.
2022-07-22 23:06:07 +01:00
a2c002e1da
Improve solder mask aperture testing.
...
1) For solder mask apertures report both the aperture and both
exposed items.
2) Don't process solder mask apertures in footprints with the
"bridging allowed" flag set.
Fixes https://gitlab.com/kicad/code/kicad/issues/12064
2022-07-22 23:06:07 +01:00
16e3d40552
ADDED: Display calculated clearance in status bar
...
In addition to showing resolved clearance, we also show the calculated
clearance in the same method as is used for DRC. This will allow users
to better examine their system while working.
Fixes https://gitlab.com/kicad/code/kicad/issues/7934
2022-07-21 15:44:48 -07:00
2de10080cd
Add edge and margin clearances to message panel.
2022-07-15 16:14:32 +01:00
a9a5136c1c
Always allow blind/buried/micro vias
...
Removes a nanny setting that prevented the use of
blind/buried/micro-vias without a checkbox. If the designer does not
want microvias in their board, they simply do not place microvias.
2022-07-12 19:47:31 -07:00
3081023b5e
ADDED: Minimum copper connection width DRC check
...
Checks all copper connections in each net/layer for minimum width
setting.
Fixes https://gitlab.com/kicad/code/kicad/issues/9870
2022-07-11 19:26:56 +00:00
c7746fa000
Fix copy pasta error.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11986
2022-07-08 17:44:36 -06:00
521b231873
Don't zero out width of shapes on Margin, only Edge_Cuts.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11967
2022-07-08 17:27:05 -06:00
8a9bf02b7e
Smarten up silk clearance & tented item handling.
...
The inspection tool will report whether or not the item is tented
(indicating in that case that any clearance will only be applied
to any hole).
The DRC test ignores tented items without a hole, and runs the
clearance test against the hole for items with a hole.
Fixes https://gitlab.com/kicad/code/kicad/issues/11954
Fixes https://gitlab.com/kicad/code/kicad/issues/11951
2022-07-08 17:27:05 -06:00
f611f9f5d3
Allow zone connection rules to target footprints.
...
If the pad is set to inherit and a rule targets its parent footprint,
then that rule should fire.
2022-07-08 17:27:05 -06:00
fa2e43f696
Reduce noise in board <-> library footprint tests.
2022-07-08 17:27:04 -06:00
7f9f37e507
Avoid double-caching FP zones
...
Leads to crashes/invalid data when multi-threading hits both at same
time
2022-07-05 20:07:18 -07:00
af6ba1a16e
Fix typos in pcbnew sub-directory
...
Found via `codespell -q 3 -S *.po,./thirdparty,./Documentation/changelogs -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,ba,busses,dout,einstance,leaded,modul,ontext,ot,overide,serie,te,,tesselate,tesselator,tht`
2022-06-30 09:39:45 -04:00
03c279ffd4
ADDED: Threadpool
...
Thread pools are long-lasting executors that have close to zero overhead
when launching new jobs. This is advantageous over creating new threads
as we can use this for threading smalling jobs and smaller quanta. It
also avoids the heuristics needed to determine the optimal number of
threads to spawn
2022-06-24 22:59:24 +00:00
a852286eb5
Cleanup compile warnings
2022-06-21 17:04:56 -07:00
82ebc247b8
More performance enhancements for DRC.
2022-06-18 19:47:11 +01:00
97b0005780
More caching for DRC.
...
Also fixes a bug where some physical clearance tests would be run even
if the clearance was 0 (or if the rule was set to IGNORE).
2022-06-17 23:58:31 +01:00
4043dca613
Push wxString allocation to smaller context
...
Prevents creation of new wxString on stack for each clearance check
2022-06-16 08:26:28 -07:00
5327b10064
Remove shared wxString instance in DRC
...
Threaded DRC access will write to this string, re-allocating the memory
without any synchronization between threads using the string. Comment
adding this listed performance as a reason for using shared strings.
Measured performance does not seem noticeably different in either case,
even with high-error count boards. If there is a case where the
performance is limiting, we can replace these wxStrings with
std::wstring and utilize fmt
Fixes https://gitlab.com/kicad/code/kicad/issues/9888
2022-06-15 16:46:03 -07:00
5e80e2a421
58f553a9ca requires that cache be layer-sensitive.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11814
2022-06-15 00:30:11 +01:00
d14fd5a9da
Fix logic error with silk overlap test.
2022-06-04 19:34:24 +01:00
8b75a32cfa
We only want "actual" shapes, not anything derived from SHAPE.
...
Also fixes a bug where GetParentFootprint would get confused by
groups.
Fixes https://gitlab.com/kicad/code/kicad/issues/11741
2022-06-04 00:24:27 +01:00
d2a9cbe6e8
Use effective width for DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11740
2022-06-03 23:27:10 +01:00
37838dffb9
Make sure physical_clearance rules are run against courtyard layers.
2022-05-10 23:02:53 +01:00
ecf6773f74
Remove dead code.
2022-05-07 21:10:04 +01:00
30ecca464d
Rename mechanical_clearance -> physical_clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11554
2022-05-06 15:54:46 +01:00
dfdedfa605
Fix some issue with NPTH pads with holes same size as pad.
2022-05-06 00:06:00 +01:00
f590dcf513
Fix a couple of typos.
2022-05-06 00:06:00 +01:00
5d0d2201f3
Improve clearance report messages.
...
Removes some duplicated terms; puts in some more headers to make
visual parsing easier, and makes non-connected-pads report the correct
data.
Also fixes a bug where zone-connection overrides of none weren't getting
handled correctly.
Fixes https://gitlab.com/kicad/code/kicad/issues/11544
2022-05-03 16:30:04 +01:00
bf2566a44f
Post-process board min clearance rather than building it in to netclasses.
...
The later makes the diagnostic messages harder to decipher.
2022-05-03 13:39:14 +01:00
d192d3c31d
Better violation title for disabled layers check.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11451
2022-04-25 09:39:49 +01:00
f0dab2e07b
Fix some layer handling issues.
2022-04-23 21:29:46 +01:00
e6684bf7c7
Add footprint checks to board-level DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11437
2022-04-23 11:34:18 +01:00
4525b1f085
More consistency in DRC error messages.
2022-04-23 09:39:34 +01:00
9ff1ae5bdc
Better inspection reporting for netclasses, custom rules and DRC.
2022-04-17 00:33:56 +01:00
7f3a75bccd
Add a bunch more inspections for rule resolution.
2022-04-15 22:10:13 +01:00
819276bd98
DP tolerance needs to be 1IU on each axis
...
ApproximatelyParallel will only check for parallel within 1 IU, so a 1x1
SEG will always be parallel and the projection is invalid
(cherry picked from commit d0796399a2
2022-04-11 16:58:10 -07:00
82820d4b1c
Cleanup.
2022-04-09 20:39:35 +01:00
722b2588f4
Better error reporting for DP uncoupled length.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10087
2022-04-08 11:40:53 +01:00
a118249093
NPTHs obey HOLE_CLEARANCE, not CLEARANCE.
...
Also, plating thickness appears on both walls, so diameter is drill
plus 2X plating thickness.
2022-04-04 20:43:08 +01:00
f7cdc7af75
Apply a more sophisticated test for ignoring isInCoupledDiffPair.
...
The basic problem is that the DRC engine does length testing and skew
testing by collecting all the diff pair constituent parts and pairing them
itself. Since each part is collected on its own, we need to ignore the
'B' unit when evaluating any conditional expressions. However, doing this
in general means that when evaluating "OwnClearance()" we also ignore the
'B' unit and return the diff pair CLEARANCE_CONSTRAINT when we shouldn't.
This implements a more discerning test which know what the current requested
constraint is when evaluating expressions.
See also https://forum.kicad.info/t/solved-custom-differencing-rule-not-working-drc/34034/6
Fixes https://gitlab.com/kicad/code/kicad/issues/11314
2022-04-02 15:12:42 +01:00
150859c973
Try Coverity fixes that don't break unit tests.
2022-03-25 16:49:29 -04:00
7da7864f5e
Fix some Coverity issues.
2022-03-25 15:51:05 -04:00
b679a21651
Zero out parent rule when overridden by local property.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11197
2022-03-21 20:49:35 +00:00
cf611f1742
Better safety around layersets.
2022-03-21 18:19:00 +00:00
5aa561abe1
Add overlapping pad test and share some tests between board & fp editor DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10086
2022-03-18 19:58:42 +00:00
0f359c8a3b
Careful of calculated fields when comparing board FPs with library.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10143
2022-03-17 13:19:25 +00:00
62f813fddc
Better error reporting for PTH pads.
2022-03-16 14:56:32 +00:00
f596ae3487
Allow mechanical-clearance checks between edge_cuts and other layers.
2022-03-16 14:56:32 +00:00
600dcd31ad
Allow track board edge clearance violations inside the holes of castellated pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-15 00:05:23 +00:00
8d682002c3
Fix previous breakage from shared_ptr going out of scope.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-14 23:57:50 +00:00
e7bf4ab8fa
Separate board-edge silk clearance from mask-edge silk clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-14 20:19:09 +00:00
2ec21c7720
Don't check for board edge collision on castellated pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-14 20:19:09 +00:00
65185f53a1
Rotate fp zones before comparing with library versions.
...
Also includes some performance fixes to not copy around triangulation
data when it's not needed.
Fixes https://gitlab.com/kicad/code/kicad/issues/10143
2022-03-14 15:53:24 +00:00
ced1e68ea1
A bit of wxT().
2022-03-13 16:09:06 +00:00
db0b733be5
Clear DRC caches before running soldermask tests again.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10922
2022-03-12 19:44:34 +00:00
89e61ff73b
More performance enhancements for DRC.
2022-03-12 14:17:52 +00:00
6f555b6258
wxT() and some cleanup in DRC.
2022-03-11 23:19:16 +00:00
eec528ae48
Fix GCC build error on Linux.
2022-03-11 17:03:01 -05:00
ae307e1b34
Parallelize DRC triangulation, keepout processing, and sliver checking.
...
Also fixes issue with adding fractured polygons in sliver checking which
slowed the board from hell down to less than a crawl.
2022-03-11 20:52:11 +00:00
663edcf665
Better progress indication for board from hell.
2022-03-09 14:30:21 +00:00
e4b56ab7f1
Performance fixes for the board from hell....
2022-03-08 23:54:34 +00:00
1fc99dd2c0
Don't call GetLayer() on a multi-layer object.
2022-03-05 23:07:43 +00:00
843a56c4e4
Implement two-staged zone priority: assigned priority followed by UUID.
2022-03-01 14:53:35 +00:00
914e706023
Replace zone-with-no-pads test with isolated copper test.
...
The later is far more discriminating.
Fixes https://gitlab.com/kicad/code/kicad/issues/11009
2022-03-01 12:02:17 +00:00
79c7859052
Apply a19d9105f0 to zone case as well.
...
Also improves on the previous comments.
Fixes https://gitlab.com/kicad/code/kicad/issues/10922
2022-02-21 13:48:34 +00:00
86988225c3
Exclude some fab attrs from library parity check.
...
Also excludes zone outline hatching, which is just a visualization
property.
Fixes https://gitlab.com/kicad/code/kicad/issues/10903
2022-02-19 14:59:50 +00:00
a19d9105f0
Fix SolderBridge check to only check across multiple
...
We should not generate an error when overlapping a single copper element
with a soldermask that is not associated with copper.
Fixes https://gitlab.com/kicad/code/kicad/issues/10906
2022-02-18 11:47:28 -08:00
6f6cf995ba
Don't ask for layer of multi-layer item.
2022-02-18 14:53:10 +00:00
1ee3ce45e8
Don't ask for layer of multi-layer objects.
2022-02-18 14:19:13 +00:00
ce0233577b
Don't try to fetch layer of multi-layer objects.
2022-02-18 13:20:36 +00:00
e09ecd8380
Don't ask for layer of multi-layer objects.
2022-02-18 13:20:36 +00:00
2172810600
Performance: better sharing of zone fills.
2022-02-15 19:19:03 +00:00
3deaf902bb
Retire the V5 zone fill algorithm.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10578
2022-02-11 13:10:52 +00:00
50a4d610a6
Be cognizant of flashed layers when generating pad shapes.
2022-02-11 13:10:52 +00:00
ca56de7816
Show DRC overflows in both tab titles and number badges.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10617
2022-02-09 17:04:32 +00:00
06e00c7957
Fix shadow variable compile warning in text DRC provider.
2022-02-08 09:26:12 -05:00
3b5474f190
Don't punt on TrueType char thickness; analyze it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10740
2022-02-08 14:10:37 +00:00
137edbe3f3
Add disclaimer for TrueType fonts to thickness test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10740
2022-02-08 14:10:37 +00:00
3c5ae6d317
Don't let zone cutout on different layer confuse us about intersections.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10583
2022-02-08 14:10:37 +00:00
091055fa1d
Don't count track as a pre-existing connection.
2022-02-08 14:10:37 +00:00
5ce559176d
Overhaul the font metrics calcs for overbar, italics and bboxes.
2022-02-07 17:36:40 +00:00
e59aaf05c6
Make sure that GetConnectedItems searches from the root item.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10583
2022-02-06 19:43:25 +00:00
b2e3f03222
More wide-string declarations.
2022-02-05 22:03:04 +00:00
193dee11e8
Add missing null check PVS V595
2022-02-05 11:25:09 -05:00
c8d14ade65
Only run starved-thermals checks when pad is actually connected to zone.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10583
2022-02-02 13:09:27 +00:00
63a3b1e20a
Estimate outline font thickness for DRC readability checks.
2022-02-01 12:01:04 +00:00
1f8c29c395
Coverity fixup.
2022-02-01 12:01:04 +00:00
5739505aa3
TextBoxes for PCBNew.
2022-01-31 20:00:47 +00:00
c01e2dcfec
Fix large memory leak in DRC
...
All elements get effective shapes, many of which get triangulated. This
memory needs to be freed when destroying the tree
(cherry picked from commit c2707f3cc0
2022-01-28 17:08:33 -08:00
29841ba315
Bring ERC & DRC dialogs into parity.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9350
2022-01-22 22:27:41 +00:00
14006495d5
Angle cleanup.
2022-01-20 22:35:41 +00:00
038db715a3
Move zone hatch orientation to EDA_ANGLE.
2022-01-19 00:34:03 +00:00
f60c05fc67
Use epsilon compartor for doubles.
2022-01-18 18:40:55 +00:00
8c246a761d
Move EDA_ANGLE from int to double.
2022-01-17 20:57:54 +00:00
0967cc82e2
Exclude rules which match no enabled layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10227
2022-01-15 01:30:03 +00:00
bc77a1e2dd
drc_test_provider_library_parity: fix a crash due to a incorrect if()...else() logic.
...
The incorrect logic allowed execution of the else sequence when it should not be executed.
2022-01-14 18:17:27 +01:00
07013d00e1
More EDA_ANGLE.
2022-01-14 16:08:19 +00:00
abd3f5bc2b
Move footprints to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
d485eb2514
Move pads to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
cf11abda3d
Fix test_drc_regressions.cpp: disable tests that need a footprint library
...
DRCE_LIB_FOOTPRINT_ISSUES and DRCE_LIB_FOOTPRINT_MISMATCH imply a library
but the test cases do not have a library.
2022-01-12 15:57:41 +01:00
ea3efac2b6
drc/drc_test_provider_library_parity.cpp: protect against null pointer use.
...
qa tests, test_solder_mask_bridging.cpp: filter not relevant DRC tests
2022-01-12 14:41:11 +01:00
8c6c87eaf4
Separate footprint lib issues from footprint mismatch issues.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10132
2022-01-11 22:28:24 +00:00
fcfe42d67c
Continue the war on wxPoint
2022-01-10 19:52:26 -05:00
21790fcab7
Fix a pair of dereference-freed-pointers in DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10335
2022-01-10 21:06:03 +00:00
c24985e8cf
drc_test_provider_sliver_checker.cpp: skip very small vertices when testing.
...
Very small vertices (length <= 2 or 3 iu) are frequent in filled areas, and
create false positive detections because one cannot calculate a meaningful
orientation of these vertices.
2022-01-10 11:50:29 +01:00
2b20a58615
Zone fill: fix an issue that uses thermal spoke width as thermal gap.
...
Fixes #10300
https://gitlab.com/kicad/code/kicad/issues/10300
2022-01-08 14:24:14 +01:00
33dbe92deb
drc_test_provider_mechanical_clearance: add missing handling of SHAPE_T::RECT
...
test_ee_item.cpp: add missing call to ClearFieldsAutoplaced();
2022-01-08 10:49:47 +01:00
b70cf1473f
Allow solder mask aperture objects to inherit nets during DRC.
...
The issue is that object A (the solder mask aperture object) can
bridge objects B and C which have different nets. Since we only do
object-to-object compares we don't find this. By allowing object A
to inherit the first net it collides with (either object B's or
object C's), we'll generate a violation with the second collision.
Fixes https://gitlab.com/kicad/code/kicad/issues/10189
2022-01-03 20:58:01 +00:00
0365c6bf4b
Coverity fixes.
2022-01-02 14:57:03 +00:00
7d671cff1e
Scoop up some more wxPoints
2022-01-01 21:06:40 -05:00
dafa8ec671
pcbnew: fix incorrect type cast in DRC_TEST_PROVIDER_TEXT_DIMS
...
FP_TEXT cannot be casted to PCB_TEXT for obvious reasons, but what I don't understand is why downcasting to EDA_TEXT also crashes due to incorrect vtable method pointer (Clang10/Linux here).
I leave this as a curiosity for whoever knows C++.
2022-01-01 22:42:16 +01:00
c4c56de708
Neurotically update position wxPoint usages
2022-01-01 11:55:51 -05:00
347e03363a
Convert wxPoint/wxSize starting from EDA_RECT usages
2022-01-01 11:30:33 -05:00
0e9cfd0af2
Add missing initialization values to variables
...
Flagged by Coverity.
2021-12-30 23:42:06 +00:00
dc98419d85
pcbnew: Add via height support in drc length
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10135
(cherry picked from commit 11c967b259
2021-12-30 09:35:10 -05:00
ab583a32f9
Better layer handling for DRC markers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10126
2021-12-26 15:06:12 +00:00
03a5bd5319
Handle flipped footprints in library compare algorithm.
...
Also fixes a bug where line styles weren't taken into account.
Fixes https://gitlab.com/kicad/code/kicad/issues/10107
2021-12-25 13:41:59 +00:00
09b7e0b72b
ADDED Exclude Footprint from Courtyard Requirement.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9881
2021-12-24 21:10:28 +00:00
d649b288a6
Swap out autoplace rotation costs for private footprint layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2291
Fixes https://gitlab.com/kicad/code/kicad/issues/5391
2021-12-24 21:10:28 +00:00
fa908e1f98
Dimensions for footprints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8441
2021-12-24 21:10:28 +00:00
ed79f6e511
Clean up some TODOs.
2021-12-24 21:10:28 +00:00
b4c5e64db2
Exclusions for Unconnected Items; Markers & exclusions for Parity checks
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5589
Fixes https://gitlab.com/kicad/code/kicad/issues/5504
2021-12-24 21:10:28 +00:00
b7e196b710
ADDED assertion constraints for user-defined DRC checks.
2021-12-24 16:13:18 +00:00
4ba3937f8a
Cleanup.
2021-12-24 15:43:24 +00:00
0332ec6016
ADDED exclude all violations of rule X.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5463
2021-12-24 15:42:22 +00:00
5f37c2b247
Custom rule severities.
...
ADDED severity token to custom rule syntax. Each rule can now define
its own severity.
Fixes https://gitlab.com/kicad/code/kicad/issues/6148
2021-12-24 15:42:22 +00:00
b2dff6fa55
Fix solder mask plotting issues.
...
1) Don't plot all footprint texts for each footprint graphic item.
2) Enforce min web thickness around board shapes and board text.
3) Enforce min web thickness around footprint shapes
4) Correctly handle multi-layer zones.
(1) and (4) will get cherry-picked back to 6.0, so after rebasing
won't actually appear in this changelist anymore....
2021-12-24 12:36:45 +00:00
ef10b36948
Add mask-to-copper clearance parameter and rename mask margin.
2021-12-24 12:36:41 +00:00
3aa6d73770
Allow min/max/opt to come from different rules.
2021-12-24 12:36:37 +00:00
4b6f2f0658
Add mechanical copper clearance testing for shapes.
...
Also includes going from distance-based neighbor exclusion to angle-
based. (Distance doesn't work when very short segments are followed
by very long ones.)
Fixes https://gitlab.com/kicad/code/kicad/issues/2512
2021-12-24 11:40:10 +00:00
1305c2177f
Add a checker for copper-to-copper clearance within a single zone.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2512
2021-12-24 11:40:06 +00:00
5433684d3c
Try to make gcc happy.
2021-12-23 23:59:48 +00:00
235e0a430d
Less flashing of the progress bar.
2021-12-23 22:31:33 +00:00
56c85bd354
Improve clearance and constraint resolution reporting.
...
1) Report on all applicable clearance types
2) Don't double-book constraints if they're used by more than one
test provider
Fixes https://gitlab.com/kicad/code/kicad/issues/8961
2021-12-23 22:31:26 +00:00
3f64b69917
Mechanical clearance rules.
...
ADDED mechanical_clearance and mechanical_hole_clearance constraints.
Fixes https://gitlab.com/kicad/code/kicad/issues/2183
2021-12-23 22:31:21 +00:00
a48867ea01
Solder mask integrity testing.
...
ADDED DRC test for solder mask aperture bridging copper from different
nets.
ADDED visualization of minimum web width processing for solder masks.
ADDED allow_soldermask_bridges property for footprints.
Fixes https://gitlab.com/kicad/code/kicad/issues/2183
Fixes https://gitlab.com/kicad/code/kicad/issues/1792
2021-12-23 22:31:14 +00:00
533276e6b6
Copper sliver checking.
...
ADDED DRCE_COPPER_SLIVER DRC error.
ADDED ADVANCED_CFG DRCSliverWidthTolerance and DRCSliverAngleTolerance.
Fixes https://gitlab.com/kicad/code/kicad/issues/2183
2021-12-23 22:31:05 +00:00
a1e3f2b188
Starved thermals DRC checking.
...
ADDED min_resolved_spokes constraint.
ADDED "Thermal relief connection to zone incomplete" violation.
Fixes https://gitlab.com/kicad/code/kicad/issues/2183
2021-12-23 22:30:42 +00:00
32721755bf
Hook up zone-pad connections to custom rules.
...
ADDED zone_connection constraint.
ADDED thermal_relief_gap and thermal_spoke_width constraints.
ADDED angle override for thermal relief spokes in Pad Properties.
Fixes https://gitlab.com/kicad/code/kicad/issues/4067
2021-12-23 22:30:26 +00:00
92e589b398
Use board maxError value, and return SH_ARC for unfilled circle.
2021-12-23 20:36:11 +00:00
2bc86fa0a8
Shapes for schematic.
...
ADDED arc, circle and rectangle shapes for schematic. Shapes support
line styles and fill colors.
CHANGED sheet background color in Edit Text & Graphics Properties to
fill color (and it now affects shapes).
Pushed STROKE_PARAMS down into common and moved all shapes to using it
for stroke descriptions.
2021-12-23 20:36:07 +00:00
4b6bf3095a
Radial dimensions.
...
ADDED radial type dimensions.
Fixes https://gitlab.com/kicad/code/kicad/issues/2056
2021-12-23 19:34:54 +00:00
21eb928218
Add Ignored Violations tab to DRC dialog.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7726
2021-12-23 19:18:45 +00:00
2001d08186
Add DRC tests for text height and text thickness.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8683
2021-12-23 19:18:45 +00:00
0a609dd48d
Add footprint library checking to DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6821
2021-12-23 19:18:45 +00:00
24fe5bc2a8
Fix DRC thread locking
2021-12-15 06:05:40 -08:00
40d44c94cd
Fix single-threaded loads/connectivity
...
We cannot set thread counts to hardware_concurrency()-1 without
considering that single core machines will get a thread count of 0.
2021-12-14 17:18:46 -08:00
0dcbfa2b69
Always use UUIDs for implicit keepout rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9580
2021-11-09 17:57:47 +00:00
6af031be05
Use double-quotes for rule expressions.
...
The Mac double-quote bug is now fixed and strings inside expressions
are single quoted making single-quoting the entire expression pretty
hard to visually parse.
2021-11-08 20:53:59 +00:00
ffd1139cfe
Make sure a pad is at least as big as its hole in the RTree.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9516
2021-11-03 18:53:26 +00:00
40e6a9a926
Fp editor: add DRC test for through hole pads without hole.
2021-10-19 14:47:29 +02:00
856cc26d4c
Allow vias the same same-net waiver that pads have for hole clearance
...
Note that in 7.0 we have physical_hole_clearance rules to give a bit
more expressivity here.
Fixes https://gitlab.com/kicad/code/kicad/issues/9420
2021-10-18 18:09:40 +01:00
b52529521e
Replace individual LIB_* shapes with LIB_SHAPE (based on EDA_SHAPE).
...
Also moves to more capable FILL_T model that can be shared.
2021-10-15 12:45:43 +01:00
fce054319c
Update DRC MatchDPSuffix routine
...
This matches the router matchDPSuffix routine until we merge the two
into a common utility
2021-10-11 10:33:50 -07:00
dfe4997664
Fix nullptr crash.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9250
2021-09-27 10:27:25 +01:00
3e7310a219
Move FP type check to FP DRC
...
Checks for validity are better centrally located where they don't
interrupt user actions
2021-09-25 08:56:27 -07:00
c38de1dcaf
Pull back some 7.0 fixes to Custom Rules code completion.
2021-09-23 13:08:31 +01:00
814b6b8e86
Fix disabled layer error text
2021-09-12 17:14:24 -04:00
0ac765c5bb
Special case footprint zones which can be on "inner layers".
...
Also improves the reporting so that it reports the actual conflict
layer rather than just the first layer the object is on.
Fixes https://gitlab.com/kicad/code/kicad/issues/9144
2021-09-12 13:53:12 +01:00
1a43515128
Repair multi-layer disabled layer tests.
2021-09-09 16:43:47 +01:00
bb2efa0649
Improve disabled layer test.
...
1) handle graphic items on copper layers
2) handle items on multiple layers
2021-09-09 15:20:48 +01:00
3b16c38756
Coverity issue fixes.
...
Fix Coverity issues 157138, 338547, and 338716.
2021-09-08 14:51:27 -04:00
a397e85589
Implement PTH/NPTH/courtyard collision tests.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9081
2021-09-04 00:16:26 +01:00
436ad0ede7
Add missing token to DRC rule parser.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9041
2021-08-27 12:49:07 +01:00
f4905cb1ae
Cherry-pick fix from 7.0 branch back to master.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9005
2021-08-25 20:14:11 +01:00
e6ca9837a2
Clear numbers from non-numberable pads and don't run DRC on them.
...
This was also the last straw on the misnamed PAD::GetName() and
PAD::SetName(), which are now PAD::GetNumber() and PAD::SetNumber().
Fixes https://gitlab.com/kicad/code/kicad/issues/9017
2021-08-24 01:03:06 +01:00
fec34e8dd8
Get rid of an extraneous layer parameter.
...
Also adds a bit of nullptr safety.
2021-08-23 20:00:17 +01:00
9770962ab4
Fix logic bug in rule processing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9011
2021-08-22 20:16:58 +01:00
1fa5e43597
Fix some dodgy logic in clearance overrides.
2021-08-22 03:24:51 +01:00
3e57700b21
Process rules in "natural" order using overrides.
...
(We used to process in reverse order with first-match-wins, but
that doesn't allow min, max and opt to come from different rules.)
Fixes https://gitlab.com/kicad/code/kicad/issues/9004
2021-08-21 16:43:11 +01:00
1e23ce1c95
Pull some fixes back from 7.0.
...
1) An earlier 6.0 fix to apply pad clearance overrides to NPTH pads
got broken, so this replaces it.
2) Allow min/max/opt to be set by different rules.
3) Fixes a bug where board minimum enforcement over a local override
didn't get the right message text.
2021-08-21 16:43:11 +01:00
8b5f393804
DRC bug fixes and debugging improvements.
...
1) Don't wait for UpdateUserInterface to build the (global) list of
layer names.
2) Report clearance resolution between a silk layer and a mask layer.
3) When writing DRC reports, include info about the violating rule.
4) Report "no relevant layers" if we fail to find anything to write
a clearance resolution report about.
Fixes https://gitlab.com/kicad/code/kicad/issues/8963
2021-08-17 15:41:12 +01:00
1a252b4f96
Add a compile error for ill-defined rules, and more performance.
...
Also adds const-safety to GetBoard().
2021-08-16 12:14:17 +01:00
eaccbce48b
Fix logic errors in progress reporting in a couple of DRC providers.
2021-08-15 22:24:44 +01:00
1ec70d30af
Cherry-pick some 7.0 Clearance Resolution improvements.
...
6.0 will be in the field for a long time, and the better the debugging
tools we have available the less costly it will be to maintain.
Fixes https://gitlab.com/kicad/code/kicad/issues/8961
2021-08-15 19:03:58 +01:00
41619ebbe2
Decouple PROGRESS_REPORTER interface from implementations.
2021-08-14 21:05:49 +01:00
e5586fb974
Accept legacy hole token as well as new hole_size.
2021-08-13 21:28:11 +01:00
d34e9e8946
Code safety.
2021-08-13 21:28:11 +01:00
4c3954aea8
Clearer DRC rule token name for hole_size.
2021-08-13 16:18:56 +01:00
f4a7565b9c
fix a compil warning
2021-08-11 08:16:26 +02:00
13fc16b03f
Fix uninitialized variable.
2021-08-10 16:51:30 +01:00
a208dac8d8
Convert hole clearance tests from NPTH holes to all holes.
2021-08-09 22:26:00 +01:00
bafa105ed0
Enforce hole clearance on NPTHs in zones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8924
2021-08-06 18:16:38 +01:00
faa1ff4ec6
Add false-negative DRC tests (and fix first bug found by them).
2021-07-31 16:41:44 +01:00
8c69a856fc
Add zone filler tests.
...
One test has pads of a bunch of different shapes and provokes some
errors to make sure they're caught.
The others are all past issues with the zone filler to make sure we
don't suffer any regressions. (They should all just pass with no DRC
errors.)
2021-07-30 17:09:24 +01:00
6aaf4413b3
Fix kicad_string.h / string.cpp mismatch.
...
They don't define a KiCad string class, so the header file name was
somewhat misleading. But the fact that they didn't match definitely
made coding more difficult.
2021-07-29 16:03:25 +01:00
f221220fe2
Rename layer ids file.
...
It hasn't had anything to do with colors or visibility for some time
now.
2021-07-29 16:03:25 +01:00
46338403e7
Unwrap some std::library typedefs.
2021-07-28 22:16:38 +01:00
8fd83cbb95
Pass wxPoint objects by reference instead of on the stack.
2021-07-26 15:35:33 -04:00
0fb864d596
Pull some name changes back from 7.0 to ease merging.
2021-07-21 20:58:59 +01:00
cf00319c85
More NULL expunging.
2021-07-20 07:27:18 -04:00
6c3ba1c20b
Coverity issue fixes.
...
Issues #332032 , #332086 , #332157 , and #332171 .
2021-07-09 10:56:35 -04:00
Jeff Young
Seth Hillbrand
Marek Roszko
luz paz
Wayne Stambaugh
jean-pierre charras
Tomasz Wlostowski
Ian McInerney
Erwan Rouault
Jon Evans