Str2Double assumes current locale. We usually switch the locale when
reading files but we should be using the function that explicitly gets
the C-locale conversion.
The config.h header for ngspice is not packaged with all platforms so
use pkg-config to fetch the version information when available. When
pkg-config is not available, check if the ngspice/config.h file is
installed on the system before including it to build the ngspice version
string. If neither pkg-config or ngspice/config.h is available set the
version string to "unknown".
Fixes https://gitlab.com/kicad/code/kicad/issues/4851
As expected, the required padding difference between wxStaticText and
wxHyperlinkCtrl varies depending on the platform. Restore the original
padding which was correct for windows and add the extra padding required
for GTK builds. Someone with MacOS should verify if the padding looks
correct and change the padding for MacOS as required.
List of hidden nets stored in project local settings
Hide/Show actions in context menu only for now, will
add them to some more GUI places soon.
Ref https://gitlab.com/kicad/code/kicad/-/issues/1951
The previous hash was not unique for changes in integer/boolean values.
Generic hash_combine routines provide decent coverage for limited extra
cycles.
The old way of checking for focus loss caused GTK to be unable to
even open the combobox. This way checks for the event sent when the
list closes and uses that to close the grid editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/4617
LoadProjectSettings changed to take place after the board
has been loaded so that board-specific project settings can
be applied (such as net visibility and color overrides)
ADDED Eeschema-specific netclass settings including wire and bus
thickness, color, and line style.
Netclasses override individual wire & bus colors and line styles.
If that proves an issue we might look at something more sophisticated
with inheritance.
Fixes https://gitlab.com/kicad/code/kicad/issues/4581
There is a difference between how wxStaticText and wxHyperlinkCtrl
controls are rendered causing alignment issue between the two. The
cheap and dirty solution was to pad the wxStaticText but this may
yield inconsistent results depending on the platform.
Fixes https://gitlab.com/kicad/code/kicad/issues/4843
The issue for the grid color was due to the fact there are 2 places to
store the color: the color settings and the m_gridColor GERBVIEW_FRAME member.
The worksheet color (color set to RED after a color change in layer render)
is a bit strange: looks like LAYER_GERBVIEW_WORKSHEET and LAYER_WORKSHEET
are both used to draw the worksheet.
When Validate() find an out of limits user value, it displays the limits.
However, the displayed limit value was incorrectly converter to internal units,
and strange values were displayed.
GTK only calculates new widths once the tree is displayed,
so calling Refresh after updating the tree but before display
will return a column width of 0. Instead, use saved column
widths if an invalid width was returned.
Fixes https://gitlab.com/kicad/code/kicad/issues/4837
Adds a possibility to replace properties inherited from base types with
a more specific ones. For example, such properties may have:
- different meaning which should be reflected in property name
(e.g. TRACK::{G,S}etWidth() sets actual track width, but
VIA::{G,S}etWidth() modifies the diameter)
- different set of possible values (e.g. BOARD_CONNECTED_ITEM::SetLayer()
should accept any copper layer, but MODULE::SetLayer() works only with
F.Cu and B.Cu)
Introduces classes:
- INSPECTED: base class for types taking advantage of
generic properties system.
- PROPERTY*: meta-data storing information about properties
- PROPERTY_MANAGER: singleton class to get properties data
- New public static function OPENGL_GAL::CheckFeatures() gets called in EDA_DRAW_PANEL_GAL::SwitchBackend() before switching to OPENGL_GAL
- Moved all OpenGL feature checks from OPENGL_GAL constructor to OPENGL_GAL::init()
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4714
As long as the arc angle stays below <60°, it will automatically choose between
clockwise and counter clockwise. This allows the user to choose the direction
with a simple mouse movement.
Swap syncs can limit the redraw rate as the screen waits for previously
issued syncs. Setting this to -1 allows for adaptive swapping
(resorting to unsynced if it falls behind) if it is supported by the
card but will fall back to unsynced (0) if the adaptive is not
supported.
Fixes https://gitlab.com/kicad/code/kicad/issues/4226
- Fix file extension for new project
- Fixes for exceptions on MSW
- Fix some ASAN issues
- Allow SETTINGS_MANAGER to run headless
- Don't flag schematic as modified after schematic setup is closed
- Don't automatically unload projects when LoadProject is called
- Don't unload project if it's the same as the current one
- Make sure to properly init/de-init template field names
Per discussion on the developers list, this old system
no longer provides much value and is seen as annoying
by many users. The new save logic should prevent any
cases of file corruption on save, which was a major
reason for the backup file system existing.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2012
Various architecture upgrades to support this.
Creating a BOARD now requires a valid PROJECT, which caused
some (mostly transparent) changes to the Python API internals.
ADDED: Project local settings file
CHANGED: Board design settings are no longer stored in PCB file
CHANGED: Net classes are no longer stored in PCB file
CHANGED: Importing board settings now reads boards, not just projects
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2578
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4070
Remove extraneous use of FLAG0 from tracks cleaner (it was checked but
never set).
Fix issue in expand connections where two parts of it couldn't agree
on the same flag (BUSY vs SKIP_STRUCT), and where the second part was
clearing the flag instead of setting it.
Remove obsolete HIGHLIGHT infrastructure (we now use selection).
Remove extraneous use of BUSY flag in several places (it was never
set).
Removes the TTL triangulator in favor of the delaunator triangulator.
This removes the only AGPL code in the KiCad codebase and therefore
allows the full project to be licensed under the GPLv3.
Add missing plot and print changes for the new bus entry properties.
ADDED: Junction properties diameter and color can now be edited.
Fixes: https://gitlab.com/kicad/code/kicad/issues/4593
when a wxTextCtrl has the focus but is read only, and cannot use a CHAR event.
It fixes an issue in Kicad manager (menus with accelerator not working) when
the wxTextCtrl window showing messages has the focus.
It's currently only supported in the Footprint Editor. It could be
easily added to the board editor (all the code is there), but the board
editor is a little short on room in the drawing tools toolbar.
As of ab83c862, the canvas scaling setting is now used on OSX
(before it was ignored). Legacy settings would have this set to 1.0,
which would not automatically scale the canvas and break on Retina
displays. OSX auto detection works well enough in wx 3.0, so we
can use it now.
Due to rounding issues, sometimes (especially for rotated pads) the region
(4 segments+4 arcs) was incorrectly closed (1 unit (nanometer) mismatch between
start point and end point.
Although it does not create bad shape, its breaks the round rect pad identification
in CAM tools.
start point and end point are now the same.
The scaling factor stored inside the canvas is created by a DPI_SCALING
helper, which will call the platform-specific functions if no user scaling
is specified. This change only affects OSX and Retina displays, so this
now also allows custom scaling to be used on OSX if desired (although it
shouldn't be needed, since wx has detection for it in 3.0.4).
A note to developers, please do not set the minimum and/or size of bitmap
buttons. It causes bitmaps to get clipped using GTK on Linux. If the
bitmap button size is not acceptable, then supply an appropriately sized
bitmap rather than attempt to force the wxWidgets sizing mechanism to do
what you want. This almost always causes platform differences that do
not work well.
* Implement ReparentQuasiModal for OSX natively
* Implement ForceFocus of OSX natively
This change means we no longer rely on the kicad-specific functions in our osx wx fork.
When the ERC is run and a component has a ERC error linked to it, if it is deleted,
when reopening the ERC dialog, the dialog crashed due to a not found item
(null pointer use)
You can now choose the behavior of dragging with the
middle and right mouse buttons.
You can also choose which modifier keys to use for
panning and zooming with the scroll wheel or trackpad.
You can also customize the zoom speed, which makes
it possible to have a good zoom experience on a wider
range of input devices.
You can also now zoom by dragging with the right or
middle button if desired.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/3885
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4348
Note: this is a basic implementation but it could be
improved once we include bus information in the netlist
and pcbnew can natively keep track of buses and nets
instead of just nets.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4158
The escape key event shouldn't be propagated after the first
tool dispatcher. Propagatint it causes it to go to parent frames,
which can mean problems arise (such as in cvpcb, where an
escape key press in the fpviewer frame was closing the main
cvpcb window when it is propagated).
CHANGED: Cvpcb fpviewer and the pcbnew fpviewer no longer have an options dialog
ADDED: Add a side toolbar to the pcbnew footprint viewer (and the measure tool)
This also cleans up some of the settings structs in the viewers, since
it was somewhat confusing before.
Fixes https://gitlab.com/kicad/code/kicad/issues/2205
* Consolidate the measure tool into one tool (this gives cvpcb
unit changing and snapping capabilities in its measure tool)
* Transition cvpcb to use actions for the sketch modes
* Replumb how magnetic items settings are stored and used
* Move it to a panel along with the canvas to have a better UI
* Allow the infobar to automatically close after a set time
CHANGED: The eeschema find notifications now use the infobar instead of
a popup window
This widget allows for non-intrusive display of text
above the editing canvas. Currently, this is used
for displaying the read only status of the files.
Set up a new lineage for SCH_ITEMS to get back to the SCHEMATIC
they live on: Items will all be parented to the SCH_SCREEN that
they are added to, and each SCH_SCREEN will point back to the
SCHEMATIC that it is part of. Note that this hierarchy is not
the same as the actual schematic hierarchy, which continues to
be managed through SCH_SHEETs and SCH_SHEET_PATHS.
This is required, because Ninja otherwise doesn't properly rebuild after
updating the version string header file.
Because BYPRODUCTS requires CMake 3.2, bump the minimum version and remove
now unused compatibility code for older CMake versions.
The window decorations introduce an offset to our window size, since
they are not used when restoring the window size at startup they are
added by the window manager again.
Fixes https://gitlab.com/kicad/code/kicad/issues/4278
Migrate COLOR_SETTINGS 0->1 to remove fpedit section
Migrate FOOTPRINT_EDITOR_SETTINGS 0->1 to use new theme if created
Remove COLOR_CONTEXT that is no longer needed
There has been a long standing (since the beginning of the project?)
issue with sharing schematics between projects. It has been somewhat
supported for complex hierarchies (a sheet shared multiple times in a
single design) but it has not been well supported for simple hierarchies
(the symbol references cannot be changed in the shared schematic). This
issue has been resolved by moving all of the symbol instance sheet paths
from the symbol definitions in the all of the project files and save all
symbol path instances in the root sheet. This ensures that orphaned
symbol instance paths do not accumulate in shared schematic files and
that designs that reuse schematic in simple hierarchies can how have
different references. It also allows the root schematic from one project
to be uses as a sub-sheet in another project.
When legacy schematics are loaded, all sheet and symbol UUIDs are
converted from time stamps to true UUIDs. This is done to ensure there
are no sheet path instance clashes between projects. That being said,
there are no checks for this. It is assumed that the probability of
UUID clashes is so low that it doesn't make sense to test for them.
Texts were drawn with a minimal line thickness = GetDefaultPenWidth().
The default pen width can be to large for small texts.
So the actual text thickness is now always clamped.
* Push all sizing operations into EDA_BASE_FRAME
* Save the unmaximized window size when maximizing
so that we can then save it in the config if the
window is maximized. Otherwise the config ends up
with the maximized size saved, and weird behavior
occurs when unmaximizing on the next opening.
Remove translation mark for strings used in debug, or strings
that cannot be translated (for instance because they are char strings
instead of wide char strings)
Iterating over the tool stack, we potentially remove the current
iterator. If this removal happens at the beginning of the toolstack, we
cannot decrement the iterator to a position before the stack without
creating an invalid state.
Now only reposition a window if it is completely on a
disconnected display or if only one corner is on screen
and it is within a region close to the screen border.
CHANGED: Window position on startup should be preserved more
It belongs out in the calling loop so that if someone else uses
finishTool() later they won't get bit by it.
This also fixes a crash bug where we weren't deactivating all tools
because we couldn't back up at the beginning of the stack (and the
loop increment therefore went past the first element).
Fixes https://gitlab.com/kicad/code/kicad/issues/4206
These pads were plotted as a segment. This is not the right way.
Pads must be flashed or plotted as regions, not painted.
They are now plotted as Gerber regions round rectangle pads.
These regions are similar to flashed pads.
Previously, the region was a usual polygon with arc approximated by segment.
Using a region with arcs is a better way because it allows CAM tools to
identify this region as a round-rect pad.
A side effect is a better shape and smaller files, however not really noticeable in fact.
Please note that the symbol cache is not embedded in the schematic file
to allow for round robin testing with the existing file format. Once
the parser round robin testing is complete, the symbol cache will be
embedded in the schematic file.
Previously, for historical reasons, they were added only if
Include Netlist Attributes option was on.
But Aperture Attributes have nothing to do with Netlist Attributes, and good
Gerber files must include them.
Let cmake generate the needed version strings, so we don't
have to spend program time doing it. This simplifies the
settings manager versioning.
Also, convert some file line endings to UNIX from Windows.
A more robust fix for https://gitlab.com/kicad/code/kicad/-/issues/4015.
Some buggy SVG interpreters can't handle 0-length ovals. In this case,
they are meant to be circles, so we can export as circles in our
plotter.
Fixes https://gitlab.com/kicad/code/kicad/issues/3995
When editing pcb items, the creation of a new net to connect existing
pads or traces can be a useful shortcut. This inserts the ability to
optionally create a new net from the Net Selector dropdown menu.
The canvas size is not guaranteed to be strictly > 0, so we need to
enforce a minimum returned size before dividing by it or passing to GAL
initialization
Replace SEVERITY_ERROR by RPT_SEVERITY_ERROR to avoid collision with a system definition.
Replace other SEVERITY_XXX by RPT_SEVERITY_XX for consistency.
Fix compil warnings and some other compil issues.
CHANGES: Symbol library file format has been converted to s-expressions.
Add support code for picking apart symbols at some future junction that
will allow full inheritance conversion of existing symbol libraries. For
now, symbols arranged by unit and body style numbers are nested for round
robin testing of symbol libraries once the parser is complete.
Config values were not stored into the right variables.
Make also an option persistent during the session
in DIALOG_UPDATE_PCB and DIALOG_NETLIST
DIALOG_UPDATE_PCB and DIALOG_NETLIST match options: use same order in dialogs.
Keeping a pointer to the actual file history inside a special
file history menu led to many cases of use after free crashes,
so instead rework the actual file history to add the menu
items.
Fixes https://gitlab.com/kicad/code/kicad/issues/3741
For some reason, OSX won't return the minimum window size properly
using GetMinWidth/GetMinHeight, so it would not properly adjust
windows with saved size (0,0).
It is already added with MSVC, and must be added with gcc/mingw
However, the cmake option:
add_definitions( -DBOOST_UUID_FORCE_AUTO_LINK )
does not work on msys2 (at least with my cmake version), so another syntax is used.
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme
Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
Using a UTF8 char inside a C string can work on unix, but not on Windows.
It must be explicitly converted in a unicode value inside a wide string
(like a wxString)
When adding a .pretty library, if the actual .pretty folder were
selected then no folder would be added to the list of libraries.
This led to an assert when normalizing paths, and the library
not being added.
Add also a comment in common.cpp about using wxLocale instead of setlocale.
DIALOG_UPDATE_FIELDS has issues in non English languages, due to its design.
The fix for mandatory fields is only a partial fix that avoid major issues.
The immediate action option clears (or not) the position of the events.
We use this to determine if the command should start at the given
position or merely activate the tool. This was being checked in the
menu options, which only activated for tool commands in the context
menu. Moving to the process event, we catch hotkeys as well.
This also restores the previous logic in eeschema that used a static
variable for storing wires rather than the private class variable.
Starting the draw event now picks up from the existing wires when
activated in immediate mode.
Fixes#3891 | https://gitlab.com/kicad/code/kicad/issues/3891
Previously we call only setlocale( xx, "C" ), but it was not enough on Windows.
Now we call wxLocale("C")
wxLocale calls setlocale, but also make some others initialization in wxWidgets.
It fixes some issues related to comma versus point as fp separator.
Especially wxWidgets warnings are no longer thrown, and a one case of incorrect
conversion is fixed.
The combination of left over test code in lib_id.h/cpp and the changes
to handle the DEBUG compiler flag correctly on all platforms exposed a
swig issue on debug builds. Removing the offending test from lib_id.h
resolved the issue.
ADDED: Back annotation algorithm,
eeschema back annotation dialog
CHANGED: added some minor helper methods to SCH_REFERENCE_LIST and SCH_REFERENCE,
split SCH_REFERENCE_LIST::CheckAnnotation on 2 parts to reuse code
Use the proper encoding to prevent extraneous conversion encoding conversion inside UnescapeString(). This change reduces the eeschema symbol library loading time (ubuntu and windows build) from 2700ms to 1700ms.
See merge request https://gitlab.com/kicad/code/kicad/merge_requests/70
This also removes vector cover types which do nothing except obfuscate
the underlying implementation.
Mainly changes SCH_SHEET_PINS and CONFIG_PARAM_ARRAY (which will soon
be replaced by Jon's new stuff).
When printing (using DC context) the bitmap will clear the full screen
unless the clipping region is set to the image itself.
Addresses KSC ticket 126
Fixes#1877 | https://gitlab.com/kicad/code/kicad/issues/1877
Bitmaps scale internally to 100nm instead of 1mil. There is a better
way to do this but I think we'll be adjusting it again when Cairo
printing in finished.
It served us (mostly) well for more than a decade. It helped KiCad grow
before the std:: came into decent shape or speed. It was a good little
list.
RIP DLIST 2008-2020
This moves EESchema DLIST structures to rtree. These changes are more
fundamental than the pcbnew changes from 9163ac543888c01d11d1877d7c1
and 961b22d60 as eeschema operations were more dependent on passing
drawing list references around with SCH_ITEM* objects.
The old methods were very clunky and not recommended (and didn't
properly cast the function types). This changes to useing the
recommended way of declaring events and casting the event handlers.
For legacy reasons, it stored left and right "spin" as flipped integers in the file format.
But the code handled the flip in multiple locations rather than just doing it on file io.
This change unifies the internal code and does the mapping in the file I/O.
ADD: Allow drawing of current and phase traces with dotted style
for easier differentiation from voltage and magnitude. The option
is available in the View menu of the simulator.
* Split up the thirdparty code into the thirdparty folder (#3637)
* Create a new kimath static library containing all the math functions
This is part of cleaning the build system for #1906.
Property is a pad info used mainly for fabrication or test.
Currently, supported properties are:
BGA property (variant of SMD pad)
Fiducial (global to the board or local to the footprint)
Test Point
Heat sink
Castellated.
And are used in Gerber files (copper layers and drill files)
Increment BOARD_FILE_VERSION to 20200104
102b5301 introduced an issue on GTK where the column width was
incorrect when read, then was set incorrectly (a known problem
on GTK tree views). We should only apply that fix on OSX.
Fixes https://gitlab.com/kicad/code/kicad/issues/3720
Quasi H or V segments are segments having the same x value or y value
(with a + or -1 max diff) for end points coordinates.
The change is a workaround, not really a fix.
Fixes#3711https://gitlab.com/kicad/code/kicad/issues/3711
Create an IsContentModified() function in each frame
that provides if the content has been modified, and
use that instead of always copying the checks.
CHANGED: Update the Linux appdata file to include new tags
* Include version tags (and others) in the appdata file
* Refactor the version string generation to clean it up
They are now in a specific block and no longer combined with an other command.
(combining these commands with an other command (D01 or D02) is deprecated)
Fixes#3677 | https://gitlab.com/kicad/code/kicad/issues/3677
Use wxMessageDialog instead of wxRichMessageDialog in DisplayErrorMessage
so the platform specific message dialog is used. wxRichMessageDialog
looks different than the stock message dialog on every platform so only
use it when a checkbox is required.
This is the first step to allowing non-segments in the line chain.
External routines cannot be allowed to change the line chain without
going through the internal routines. To accomplish this, we remove the
Vertex() and Point() access routines and only leave the const versions.
Transformations are given for both points as well as the chain itself.
This change completely removes the LIB_ALIAS design pattern an replaces
it by allowing LIB_PART objects to inherit from other LIB_PART objects.
The initial implementation only allows for single inheritance and only
supports the mandatory fields in the derived part because that is all
that the current symbol library file format will support. Once the new
file format is implemented and saving to the old file format is deprecated,
more complex inheritance will be added. The LIB_ALIAS information saved
in the document files was move into the LIB_PART object. This change
impacts virtually every part of the schematic and symbol library editor
code so this commit message is woefully incomplete.
REMOVE: Removed the symbol aliases concept from the schematic and symbol
editors and the symbol viewer.
NEW: Replace the symbol alias concept with simple inheritance that allows
a library symbol to be derived from another library symbol.
Ratsnest did not need a reserve and then iterative emplace. Instead, we
use resize(). Stroke font gets private vars initialized and kiway
variables that are only used in debug builds are properly scoped for
releases as well
Calling resize(size()) will only zero out elements that exist above the
vector size(). The memory is not freed in this case. shrink_to_fit()
will accomplish this action (at the discretion of the library)
This update replaces the existing uses of unique pointer creation with
the C++14 std::make_unique call that provides proper memory release in
event of an exception.
The crash is inside wxDynamicLibrary::Load() when loading Eeschema,
and hard to find on Windows (gdb shows nothing).
Perhaps due to some issue with a specific string.
The fix is to switch to "C" locale with LC_COLLATE option to load the dll.
Fixes: lp:1853681
https://bugs.launchpad.net/kicad/+bug/1853681
Mainly because it creates a new keyword a new keyword in *.kicad_pcb files,
and needs some tests, this is currently a advanced feature.
Enable it by adding "UsePinFunction=1" in "kicad_advanced" config file.
Note also "UsePinFunction=1" only enable saving this info in *.kicad_pcb
and kicad_mod files.
The pin name defined in Eeschema is now available as pad info.
Useful for the board designer (the pin function is displayed in the message panel).
Needed for the Gerber P&P files.
Remove not used files:
- markdown2html is not used (we are using "Sundown" tool)
- newstroke_font_without_CJK.cpp is removed.
Due to code optimization the full font works fine without memory issues
-fix also a few very minor compil warnings
Ensure we iterate over all the sub directories and files inside of them
when deleting a directory from the project tree.
Fixes: lp:1852357
* https://bugs.launchpad.net/kicad/+bug/1852357
Handle symbols as well as strings in the "source" lists of
netlist files.
Handle Protex gerber file extensions.
Check for project_name-whatever pattern for files that we
don't recognize (such as project_name-NPTH-drl_map.ps)
Previously, the build version would only update if the dialog_about.cpp
file were modified. This moves the date generation into the same file
as the build version, so it will be updated whenever a new version
is made.
Mainly replacing std::string by wxString to manage filenames.
On Windows, a sdt::string cannot manage a filename, unless using
in many places TO_UTF8 and FROM_UTF8.
So the best way is to use a wxString for filenames and error messages.
Don't accidentally flip the x-axis glyph size when resetting after
a sub- or superscript.
Special-case three tildes in a row. (We could also do this for
sub- and superscript, but does anyone really need a superscript
^ or a subscript?
Fixes: lp:1851657
* https://bugs.launchpad.net/kicad/+bug/1851657
Fixes: lp:1851880
* https://bugs.launchpad.net/kicad/+bug/1851880
Note that since the markup might exist for other reasons, it has
to be turned on with a preference setting. (It goes through a set
of bitflags so the same architecture can be used for other markup
structures that we might want to support in the future.)
Note also that this is more about engineering nomenclature than
visual formatting. In that respect it's more similar to overbar
than italic or bold.
RS274X Gerber files using only regions (polygons) can be valid, and are not old RS274D files
Now a warning is raised only if there are some missing D codes definitions
(RS274D file or broken RS274X file)
Remove unused var and add comments
Fixes: lp:1850821
https://bugs.launchpad.net/kicad/+bug/1850821
We have forbidden lists maintained in 3 separate locations. This causes
a bit of confusion as to which is correct.
This makes the list uniform but remains to place the character set in a
single location.
The constrained draw was constraining the polygon size to fit the
existing points rather than extending the existing points to fit the
user's intent.
This adds a 90° double-joint for the completion polygon that allows the
user to complete common constrained polygons visually based on the
preview with a double-click to finish.
Changing common settings in EDA_BASE_FRAME may segfault for frames that
don't implement tool manager yet (simulator)
Fixes: lp:1849492
* https://bugs.launchpad.net/kicad/+bug/1849492
deque structures have higher overhead than vectors. Not usually
problematic, but with hundreds of thousands of characters each with only
a few strokes, the overhead becomes dominant.
Therefore, for some footprints, the right footprint was not associated to the component.
The hash calculation was using a XOR to combine 2 sub hash values.
This is not a strong way to combine these hash values.
They are now added. Looks better to identify similar and different footprints.
Fixes: lp:1847575
https://bugs.launchpad.net/kicad/+bug/1847575
It allow using the previous font set without CJK.
The new font (with CJK) is very large (10x), and can create (on Opengl) out of memory issues
with some graphic cards.
* Fix wildcard display in the file selector dialog (on GTK
it would show the regex to the user)
* Move the file extension comparison into a common function
* Make the events generated by the selection of context menu items
have the position where the menu was opened
* Ensure that TC_COMMAND type events have their position set to
be the cursor position where the event originated
Standard apertures are circle, rect, oblong and polygon (regular polygonal shapes with 3 to 12 vertices)
The support of the standard aperture type polygon was missing in Gerber plotter.
The help file bridget_tee_formula.md can be displayed in pcb_calculator.
For Help messages, a markdown text (with some basic html tags) is often enough
and is more easy to translate than full html texts.
Previously, a 600 DPI was used to set device scale (can create minor visible rounding issues).
Using now 4800 DPI to reduce these rounding artifacts.
Fixes: lp:1845229
https://bugs.launchpad.net/kicad/+bug/1845229
* Move column width manipulation into the lib tree adapter
* Fix issue with GTK where if someone types too fast, the part
column gets 0 width.
Fixes: lp:1841584
* https://bugs.launchpad.net/kicad/+bug/1841584
The OnKillFocus handler of the UNIT_BINDER replaces the text in the
control with the evaluated string, which removes the selection. To
get the original text on the primary selection clipboard, we must
add it ourselves.
Fixes: lp:1794623
* https://bugs.launchpad.net/kicad/+bug/1794623
Use the HTML_MESSAGE_BOX window to present the warning messages rather
than wxMessageBox which would overflow the display when there were a lot
of graphic items that could not be parsed.
Fixes lp:1839565
https://bugs.launchpad.net/kicad/+bug/1839565
The INT_MAX limit for most elements makes sense only for single-segment,
straight line elements. For elements that accumulate lengths, we should
utilize the long long int (64 bits) to allow for greater lengths.
Fixes: lp:1842367
* https://bugs.launchpad.net/kicad/+bug/1842367
We use DIALOG_SHIM to display many items that should behave more like
frames with the ability to min/max/resize. This changes the default
custom dialog behavior to the frame-type.
Fixes: lp:1829950
* https://bugs.launchpad.net/kicad/+bug/1829950
The thumb size changes between system versions and (on GTK) render
managers, so hard-coded wasn't working. This gets the actual value from
the system and uses to adjust the range. Changes in the range can also
trigger the refresh.
Fixes: lp:1822617
* https://bugs.launchpad.net/kicad/+bug/1822617
Fixes: lp:1816749
* https://bugs.launchpad.net/kicad/+bug/1816749
They're now used for bus definition control characters.
Also fixes the sheet pin edit dialog to correctly escape/unescape
netnames.
Fixes: lp:1840834
* https://bugs.launchpad.net/kicad/+bug/1840834
When plotting in Eeschema, various elements may be filled with either
the foreground or background colors. The fill mode is rather unique,
requiring un-stroked pie wedges for arcs and both closed and open filled
polylines.
Fixes: lp:1840769
* https://bugs.launchpad.net/kicad/+bug/1840769
(cherry picked from commit 213547f545)
KiCad is case sensitive but we need to be consistent in displaying sort
order as case insensitive (same as file systems)
Fixes: lp:1836911
* https://bugs.launchpad.net/kicad/+bug/1836911
(cherry picked from commit ebba15fe67)
The base initialization of EDA_RECT sets a 0/0/0/0 rectangle that
prevents merging properly with valid EDA_RECT. This sets the default to
be uninitialized until the internal data are set.
This allows rapid debugging of the coroutine memory issues. It moves
the default stack size to 256 * 4096 = 2^20, which will utilize full
pages on all architectures.
1) don't ASSERT; use exceptions (which can be caught) instead.
2) clean up LIB_LOGGER so it's only used during sync
3) fix typos in wxLogMessage() calls so they produce output.
4) throw on unrecognized token in loadContent().
5) if clipboard can't be pasted as content then paste as text.
Fixes: lp:1840172
* https://bugs.launchpad.net/kicad/+bug/1840172
libcontext currently restores and saves the FPSCR register
on ppc64. This behavior is fine (though unnecessary) on the
ELFv1 ABI which designates the register as volatile, but has
been observed to cause crashes on ELFv2 systems.
The ELFv2 ABI designates the FPSCR register as Limited-access
and specifies specific conditions that must be met to clobber
it. It does not seem that a context swap function meets these
conditions (and indeed, the save/restore register example in the
ABI document does not modify FPSCR).
This patch fixes ELFv2 ABI compliance by removing the FPSCR
save/restore code in libcontext entirely. This fixes observed
crashes on the platform and should have no consequence for
ELFv1 support.
Fixes: lp:1840088
* https://bugs.launchpad.net/kicad/+bug/1840088
* Push a function into CONDITIONAL_MENU that adds the item
* Modify the tooltip for close and exit items to have the
program name
Fixes: lp:1835454
* https://bugs.launchpad.net/kicad/+bug/1835454
KICAD_STDLIB_DEBUG option generate intrusive tests and asserts, and on Windows, generate crashed not captured by GDB.
KICAD_STDLIB_LIGHT_DEBUG generate less intrusive tests and asserts.
it adds only -Wp,-D_GLIBCXX_ASSERTIONS and that generate less asserts.
Add also the new build options in dialog about.
There seems to be a bug with certain GTK setups that prevents the
submenus from getting sized correctly unless the elements are added
when the main menu is displayed.
Fixes: lp:1835460
* https://bugs.launchpad.net/kicad/+bug/1835460
Also rewrites the PCBNew Find dialog to make use of the above, including:
1) searching in user-defined footprint fields
2) searching in pcb text
3) a history list in the search popup
4) case sensitive searching
5) word sensitive searching
6) the ability to turn wildcard searching on/off
7) better placement of the result when the dialog obscures part of the
window
Fixes: lp:1838006
* https://bugs.launchpad.net/kicad/+bug/1838006