This standardizes selection tools in SELECTION_TOOL class to be able to
handle a long-click as asking for a non-heuristic disambiguation menu.
Fixes https://gitlab.com/kicad/code/kicad/issues/8490
Don't show the clean up sheet pins context menu entry when the selected
sheet doesn't have any pins to clean up.
Remove sheet has no pins to clean up nag dialog now that the context menu
entry isn't shown unless there are pins to clean up.
Having the logic split between three different paths was
a bit much, this should hopefully be a bit easier to
maintain. All save logic now goes through SaveProject;
individual file writing is now a private function.
Also change Save As to Save Copy As in project manager
mode, as we don't want to change projects from inside
the editor in project manager mode.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9015
They don't define a KiCad string class, so the header file name was
somewhat misleading. But the fact that they didn't match definitely
made coding more difficult.
The first time a DIALOG_SHIM was created, with a given size, this size
was not taken in account. This this is now forced.
(when recreated during a session, this is the last dialog size that is used)
When doing a schematic cleanup, for instance, we were breaking wires
and pushing undo records on to the stack. Needless to say, this was
pretty unexpected for the rest of the undo framework and caused all
kinds of mayhem (including crashes in some cases).
Fixes https://gitlab.com/kicad/code/kicad/issues/8704
It's tempting to say that we don't need to exclude filename chars
from symbols, but we might regret that decision down the road. Better
to just escape them.
Fixes https://gitlab.com/kicad/code/kicad/issues/8694
SCH_PIN wasn't handling the legacy empty string token (~), but
more importantly this will allow text variable resolution specific
to the schematic.
Fixes https://gitlab.com/kicad/code/kicad/issues/8625
We moved it earlier because AddItemToScreenAndUndoList() was clearing
it, but it needs to be set for AddItemToScreenAndUndoList() too.
Fixes https://gitlab.com/kicad/code/kicad/issues/8289
Units in library items start at 1. 0 is reserved for "all units".
Previous code was requesting an out of range index due to an assumption
that units start at 0.
Undo does some fairly major redraws (including setting the current
screen), all of which drop the selection and cancel interactive tools.
Make sure the selection is re-built *after* all those run.
Fixes https://gitlab.com/kicad/code/kicad/issues/8492
The only subtle difference is that Duplicate() does not modify the
clipboard contents so we need to keep a local variable in which to
store the result of a Copy()
Use justification instead of orientation relative to the anchor point when
describing text direction and alignment. This seems to be the preferred
method by most users so hopefully this will eliminate some confusion.
Fix a bug in the s-expression schematic parser that failed to take into
account how graphical text alignment is defined for graphic text objects
compared to label text objects.
Fixes https://gitlab.com/kicad/code/kicad/issues/6489
ADDED Paste Special... action in pcbnew
CHANGED Additional options for Paste Special... in eeschema, including
"Assign unique reference designators to pasted instance"
Duplicates are reannotated on paste in the same way in pcbnew and
eeschema such that when copying and pasting the same block in the
pcb and schematic, the reference designators will match.
Save sheet and symbol instance information to the clipboard on copy
Load sheet and symbol instance information from the clipboard on paste
and renumber page numbers after loading.
Correctly handle pasting in a multiple hierarchy by ensuring symbol and
sheet instances are updated for all instances of the destination sheet.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8207
wx/wx.h includes all wxWidgets .h files, and sometimes creates collision
names in #define between kicad and windows headers
Moreover, blindly including a lot of useless files is compil time consuming
REMOVED: Update schematic option from geographical annotation dialog due
to potential issues with incomplete and/or broken updates. Use "Update
Schematic from PCB" tool to update reference designation changes.
Forcing the footprint reference designator changes back to the schematic
without checking any other board changes in the schematic could leave the
schematic in a undefined state. The update schematic from board tool is
the correct method to sync any changes from the board.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8042
When activate the new symbol placement, the mouse cursor is outside the canvas.
Therefore a autopan was started and not so easy to stop.
Now the mouse cursor (and the graphic cursor) are moved to a better location inside the canvas.
Fixes#8156https://gitlab.com/kicad/code/kicad/issues/8156
We've been doing this for some time to wires that are attached to
the moving block (and therefore have the other end anchored). However
we also need to apply it when dragging a single end of a wire.
Fixes https://gitlab.com/kicad/code/kicad/issues/7807
The native cursor must be set on the GAL canvas wx object,
not its frame (otherwise on GTK the cursor is only set
when we get a request for it from the WM and not immediately).
Fixes https://gitlab.com/kicad/code/kicad/issues/6421
After commit 9535153f9e there were no more IDs inside the legacy ID
system. Therefore the entire system for dispatching and looking up
the legacy ideas and handling those events can now be removed and
the tool dispatcher simplified (it no longer needs to know about
the ACTIONS class).
The ACTION_MENU constructor now takes the tool as an argument,
so the call to SetTool() immediately following it can be removed
and the tool just passed into the constructor.
SHIFT, CTRL, ALT modifier keys were handled in 2 different codes, one for
the selection tool and another to modify the mouse cursor shape, with 2
different configs.
Now the modifiers are managed from only one function.
Pcbnew: group also SHIFT, CTRL, ALT modifier keys management to a specific function.
Fixes#8021https://gitlab.com/kicad/code/kicad/issues/8021
For some reason, the footprint UUID was being prefixed to the sheet path
which caused the symbol look up by sheet path to fail. An option was
added to not do this when the geographical back annotation to the schematic
is performed.
We kept having various issues of the pointer list going stale. This
will prevent all permutations of that.
Also while I was in there I fixed the double-move thing (see bug
number).
Fixes https://gitlab.com/kicad/code/kicad/issues/7910
1) Accept <enter> as OK if the multiline textbox isn't shown.
2) Focus and select all in first control if multiline textbox isn't shown.
3) Make title be title caps ("Edit Sheet name Field" looked dorky).
Fixes https://gitlab.com/kicad/code/kicad/issues/7940
1) Cloning the component fails to select all its pins.
2) Something about the layer compositing causes light selection shadows
to get even lighter. The default pretty much disappears.
Fixes https://gitlab.com/kicad/code/kicad/issues/7908
1) Don't factor in pin names when computing symbol body boundingbox.
2) Grid-snap only in the axis corresponding to the layout side.
3) We only need interline spacing *between* lines, not for each line.
4) Also cleans up the unit checking logic as the unit can't be more
than 0 unless it's a multi-unit symbol.
Fixes https://gitlab.com/kicad/code/kicad/issues/7907
Bitmaps are now identified by an enum class instead of by pointers.
Bitmap loading and caching is now handled by a class in common, and
we no longer compile most bitmaps into the binary, so there is no
longer a bitmaps static library.
Instead, bitmaps are archived to a .tar.gz file which is installed
in ${KICAD_DATA}/resources/images.tar.gz
The source PNGs are checked in to Git as the original CPP files were,
so that people can build without the required dependencies to convert
SVGs to PNGs.
Initial support is also added for dark theme icons, although this
is not yet exposed in the GUI.
Stubs are present for multi-resolution image resources, but this is
not fully-baked yet and could use some refinement.
CHANGED: add corner and repeat last command now default to 'I' instead
of '<insert>' on Mac.
1) wxWidgets doesn't currently display the correct graphic in the menu
for the insert key
2) Mac laptops don't have an instert key
Fixes https://gitlab.com/kicad/code/kicad/issues/5016
CHANGED: Ctrl-middle mouse button double click should perform
'Zoom to Objects' in Eeschema, but a change in modifier key handling
broke it. This MR restores the functionality.
Fixes https://gitlab.com/kicad/code/kicad/issues/7803
This fix required sorting all of the LIB_PART draw items to ensure
accurate comparison between the symbols stored in the schematic and the
original library symbols. This has a noticeable impact on symbol library
load performance. It may also cause significant changes the next time
the library is saved due to changes in the draw item sorting. Hashing
may be a better solution here but this addressed the immediate problem.
A skeleton method SCH_SCREEN::SwapSymbolLinks() was added because there
is most likely an issue with orphaned symbols in the schematic library
symbol cache during undo/redo operations. More testing is required to
verify this.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7263
The move tool can stack on others, so when we re-enter the previous tool
this caused another immediate action. We flag re-entry in the tool
stack to check for this and avoid unexpected tool starts
I think the guessSelectionCandidates narrows down to a single item
in 99.9% of cases, so we can probably remove this entirely. But for
now it's safer just to fix it.
When a user clicks on the "Add Component", "Add Power" or "Add Footprint"
icon, they want to add the item. Requiring an extra click on the screen
before selecting the component/footprint is not needed.
Original architecture was to pass KICAD_T in to specify what kind of
object you wanted. That didn't work well with things like cursor
shape so it was moved to setting booleans based on the ACTION. When
I cleared out the old KICAD_T stuff I missed one case where it was
still used. That is now corrected as well.
Fixes https://gitlab.com/kicad/code/kicad/issues/7651
Also allows some symbol lib operations when we know the context even
if the library itself isn't selected. (For instance, select a symbol,
copy, paste.)
Adds ability to start new commit to eeschema, allowing all
AddItemsToUndoList to always append without foreknowledge. Keeps newly
split wires on the tool until placed
Fixes https://gitlab.com/kicad/code/kicad/issues/7512
The automatic wire tool was not working in the gridless mode because the
grid snapping on/off logic present in `EE_GRID_HELPER`, based on the
value of `m_enableGrid`, was not taking into account that another check,
but for the global KiCad setting, would be performed in the `Align()`
method, which is inherited from `GRID_HELPER`.
I've modified all tests of `m_enableGrid` value to also take the global
setting into account, and moved checks for it to `Align()` method, as
it's more consistent this way.
I've also removed an override of the `Align()` method in the
`PCB_GRID_HELPER` class, as it was made redundant by my changes.
Fixes https://gitlab.com/kicad/code/kicad/issues/7402
For unknown reasons, the move tool was not clearing the stack when
called from the edit tool. This moves the call to move tool to after
clearing the edit tool from the stack. The move tool handles cleanup,
so we skip the original reason for waiting on the move tool before
finalizing the edit tool routines
Fixes https://gitlab.com/kicad/code/kicad/issues/7481
Some differences are due to difference between libraries being files
in symbol editor and directories in footprint editor, but this unifies
most of the rest.
It also dispenses with the save-to-library vs save-to-document distinction
in the GUI because it makes for too much variability in the GUI, was
implemented differently between the two editors, and isn't needed as much
anymore now that we have the highly visible infobar.
There was also an issue that the save-to-board icon occupies the same
location and has the same size/shape/colours as the Board Setup icon in
PCBNew.
Fixes https://gitlab.com/kicad/code/kicad/issues/7215
Starting a new action (to add junctions) will break the move tool loop
and cancel placement. We need to wait until the tool completes before
choosing where to place the junctions
Fixes https://gitlab.com/kicad/code/kicad/issues/7421
Now looks at how hard it is to select the item (grids) and switches only
if the mouse is more than a grid square away and there is a new item
under the mouse.
Fixes https://gitlab.com/kicad/code/kicad/issues/4455
Forcing grid snap for the kick-start behavior loses snaps to pins that
may be desired. This also adds force-snapping in select mode to match
the user's auto-start preferences
Fixes https://gitlab.com/kicad/code/kicad/issues/7293
Prior to this change the "Save As.." command would take a different action
based on the state of the editor which could be confusing. There are now
separate commands for saving the currently selected library or symbol.
CHANGED: The implicit save as menu entry which would save the currently
selected library if no symbol was selected or the current symbol to a
different library. There are now separate save as commands for libraries
and symbols to make it obvious what is being saved.
Consider a pin synchronized iff the names and electrical types match in
addition to the position, orientation and demorgan variant.
Also, only modify one matching pin per unit. This prevents
moving/editing a full stack of pins on the same unit when synchonized.
Fixes https://gitlab.com/kicad/code/kicad/issues/2590
In particular, allow grid positions to override line snapping if
they're a better match (and do this independently on x and y axes).
We already allow a nearer anchor to override, but that should be
based on a cartesian distance rather than independent axes.
Fixes https://gitlab.com/kicad/code/kicad/issues/6626
CHANGED: If you set the auto-increment value to a negative number,
created a net label and hit the insert key, when the name got below zero,
the net labels tried to go negative but created bad labels instead.
Now the code caps decrementing at zero, warns users when it has
happened, and explains why.
Fixes https://gitlab.com/kicad/code/kicad/issues/6537
We had some spurious bugs where both ends would get dragged to a
single point (making them disappear). While I never caught it
in the debugger, I'm guessing that the flags weren't getting
cleared properly or were getting overwritten or something. Anyway,
it now uses std::pair instead.
Fixes https://gitlab.com/kicad/code/kicad/issues/6550
Fixes https://gitlab.com/kicad/code/kicad/issues/6431
- update hierarchy navigator after any modifications to the SCH_EDIT_FRAME
- do not generate ghost selection events after updating hierarchy tree
- use Human Readable path in SCH_EDIT_TOOL::EditPageNumber
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5760
1) init reference pages before trying to draw the SCH_FIELDs when
turning intersheet references on
2) don't double redraw because we accidentally cleared the last
hover item on a non-mouse-moved event.
3) make sure the root sheet gets a name for the hypertext menu.
Copy to clipboard save items (using S expr description) using wide strings
(not UTF8 encoding).
But Paste from clipboard was not converting the wide string to UTF8 string
when getting the stored data to send it as std::string to the S expr reader.
Fixes#6449https://gitlab.com/kicad/code/kicad/issues/6449
1) Generalize SCH_ITEM owners (SCH_COMPONENT, SCH_SHEET, and now
SCH_GLOBALLABEL)
2) Generalize hypertext items
3) Use SCH_FIELD autoplace infrastructure for placing intersheet
references
4) Use textVar infrastructure for buildin intersheet references.
As an important side-effect this also fixes the undo issues with
intersheet refs.
We want to look for a junction before merging two touching colinear
segments, but the old code would also check for a junction when
merging two overlapping segments, which is not what you want.
Fixes https://gitlab.com/kicad/code/kicad/issues/5960
It was causing problems with surprising behaviour and issues with
allowing spaces in existing labels. We'll work on something better
for 7.0....
Fixes https://gitlab.com/kicad/code/kicad/issues/6073
The groundwork has now been laid for per sheet instance data. Initially
this only supports sheet page numbers but could be expanded to include
other per sheet instance information.
ADDED: Support for user defined schematic page numbers.
Also fixes a bug where the auto-start-wire stuff was messing up the seleciton
when the selection tool wasn't at the top of the tool stack.
Fixes https://gitlab.com/kicad/code/kicad/issues/5960
CHANGED: The button in the left toolbar for hiding/showing hidden
pins, and the button for forcing/relaxing H&V only wire mode had
no tooltips. This MR adds them.
CHANGED: If you start the interactive delete tool and the mouse pointer
isn't near anything, Eeschema tries to use a null EDA_ITEM pointer
which throws an exception. This commit checks if the pointer is null
and exits if it is.
ADDED: Make middle mouse button double click do a 'Zoom to Fit'
in Eeschema, Pcbnew, and Gerbview. Ctrl-MMB does a 'Zoom to Objects'
in Eeschema.
Fixes https://gitlab.com/kicad/code/kicad/issues/1988
CHANGED: When moving a footprint, Eeschema was always warping the mouse
when moving an item regardless of the state of the "Warp mouse to
origin of moved object" checkbox. This MR now honors the state of the
checkbox when moving schematic items.
NOTE: Issue 5279 originally only mentioned Pcbnew, but after the fix
for Pcbnew was submitted, a user pointed out it also happened in
Eeschema. Becuase of this, there are two MRs that "fix" the same issue.
Fixes https://gitlab.com/kicad/code/kicad/issues/5279
The snap range needs tuning to preference and monitor resolution. This
shifts the default range down for users until the customization bits are
implemented.
This separates the two options (drag/move) into different actions. Drag
will drag all graphical lines connected. Move will disconnect the
graphical lines when moving.
You can now enable and disable snap to grid when drawing/editing across
all apps. You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
1) use SCH_COMPONENT::GetRef(), GetValue() and GetFootprint() when
instance-specific info is needed
2) update UpdateAllScreenReferences() to handle value and footprint.
3) BACKANNO is CvPcb's handler, not back annotation's handler. Which
means it needs GUI behaviour, not back annotation behaviour.
Fixes https://gitlab.com/kicad/code/kicad/issues/5520
Also fixes a couple of bugs where resolving a textVar reference
to the refDes or unit wouldn't get the correct value in a
hierarchical schematic. (Unlogged.)
Fixes https://gitlab.com/kicad/code/kicad/issues/5397
* Make the app progress indicator only have the indeterminate state
when the taskbar indicator is used (causes an uused variable warning
on wx<3.1)
* Remove unused dry run variable in pcb_netlist.h
* Remove unused forceDropAnnotations from the paste special dialog
since the dialog only controls keeping them.
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.
There is still some debugging output in test code that really needs to
be moved into a unit test.
Add debugging output section to the coding policy regarding debugging
output.
* Frames moved: cvpcb, cvpcb footprints frame, gerbview, pagelayout editor
This also introduces new EDITOR_CONDITIONS that are used to set the
conditions of very common editor settings.
Also, some IDs were converted to tools in the pagelayout editor.
LIB_PIN is never used in the connectivity calculation,
so it should use SCH_PIN instead. Additionally, the label
orientation should take into account the orientation of
the component to ensure they don't overlap.
We used to have to open a PCB_EDIT_FRAME to get the settings for
the footprint editor and footprint viewer. This necessitated some
special processing when opening a PCB_EDIT_FRAME to actually edit
a board as it might already be open but unloaded.
Since the new settings architecture allows the footprint editor and
footprint viewer to init themselves we no longer need the special-
case code.
Rather than displaying dialog that has every update option possible like
updating footprints in the board editor, this change updates the library
symbol immediately using the symbol library identifier and requires no
additional input from the user.
ADDED: Context menu entry for schematic symbols to update the symbol from
the symbol library using the existing library identifier.
Add missing plot and print changes for the new bus entry properties.
ADDED: Junction properties diameter and color can now be edited.
Fixes: https://gitlab.com/kicad/code/kicad/issues/4593
CHANGED: All mandatory fields in derived symbols can be edited. This
not only includes the field value but also all text properties.
Kill the dual datasheet variable storage which caused many datasheet
bugs over the years. The datasheet is now always stored in the data
sheet field.
Note: this is a basic implementation but it could be
improved once we include bus information in the netlist
and pcbnew can natively keep track of buses and nets
instead of just nets.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4158
Set up a new lineage for SCH_ITEMS to get back to the SCHEMATIC
they live on: Items will all be parented to the SCH_SCREEN that
they are added to, and each SCH_SCREEN will point back to the
SCHEMATIC that it is part of. Note that this hierarchy is not
the same as the actual schematic hierarchy, which continues to
be managed through SCH_SHEETs and SCH_SHEET_PATHS.
Add required library symbols to new file formatter and parser when copying
schematic symbols to prevent missing library symbol when pasting into a
different schematic which may not have the same library symbol available.
Fix a minor bug where the default schematic symbol reference was not set
by the parser when loading.
Fixes https://gitlab.com/kicad/code/kicad/issues/4442
The duplicate sheet code path assigned a SCH_SCREEN object instead of a
SCH_SHEET object as a parent. A recently added assertion to check for
this did it's job.
Fixes https://gitlab.com/kicad/code/kicad/issues/4369
This is a very large and potentially disruptive change so this will be an
unusually long and detailed commit message.
The new file formats are now the default in both the schematic and symbol
library editors. Existing symbol libraries will be saved in their current
format until new features are added to library symbols. Once this happens,
both the legacy schematic and symbol file formats will be no longer be
savable and existing libraries will have to be converted. Saving to the
legacy file formats is still available for round robin testing and should
not be used for normal editing.
When loading the legacy schematic file, it is imperative that the schematic
library symbols are rescued and/or remapped to valid library identifiers.
Otherwise, there will be no way to link to the original library symbol and
the user will be required manually set the library identifier. The cached
symbol will be saved in the schematic file so the last library symbol in
the cache will still be used but there will be no way to update it from the
original library.
The next save after loading a legacy schematic file will be converted to
the s-expression file format. Schematics with hierarchical sheets will
automatically have all sheet file name extensions changed to .kicad_sym
and saved to the new format as well.
Appending schematics requires that the schematic to append has already been
converted to the new file format. This is required to ensure that library
symbols are guaranteed to be valid for the appended schematic.
The schematic symbol library symbol link resolution has been moved out of
the SCH_COMPONENT object and move into the SCH_SCREEN object that owns the
symbol. This was done to ensure that there is a single place where the
library symbol links get resolved rather than the dozen or so different
code paths that previously existed. It also removes the necessity of the
SCH_COMPONENT object of requiring any knowledge of the symbol library table
and/or the cache library.
When opening an s-expression schematic, the legacy cache library is not
loaded so any library symbols not rescued cannot be loaded. Broken library
symbol links will have to be manually resolved by adding the cache library
to the symbol library table and changing the links in the schematic symbol.
Now that the library symbols are embedded in the schematic file, the
SCH_SCREEN object maintains the list of library symbols for the schematic
automatically. No external manipulation of this library cache should ever
occur.
ADDED: S-expression schematic and symbol library file formats.
SCH_SHEET objects can only have another SCH_SHEET object as a parent
or nullptr for the root sheet so overload EDA_ITEM::SetParent() to
prevent the parent from being set to another type of object and add
some checks to the root sheet code just in case someone gets clever
and attempts to bypass the overloaded SetParent() call.
(the dialog was reactivated by calling Raise(), but this is not enough: Show()
must be called also, at least on Windows).
Fix also a minor wxWidgets alert in ERC dialog.
Fixes#4171https://gitlab.com/kicad/code/kicad/issues/4171
deselect the previously placed items.
Otherwise, the changes (rotation, mirroring...) made during placing the current symbol
are applied to other previously placed items.
This is obviously not what is wanted, and creates crashes in Eeschema.
Fixes#4163https://gitlab.com/kicad/code/kicad/issues/4163
Move the camera out to its own so that everything else is board-
related, and then rename BOARD_ADAPTER.
At some point the flags should probably be moved out too, and they
can have the EDA_3D_SETTINGS name.
Replace SEVERITY_ERROR by RPT_SEVERITY_ERROR to avoid collision with a system definition.
Replace other SEVERITY_XXX by RPT_SEVERITY_XX for consistency.
Fix compil warnings and some other compil issues.
The symbol check output the HTML message for each item. This is _very_
slow and can lock the system reponsiveness. Changing to a queue/flush
method is much faster
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme
Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
When searching for fields, the code was sometimes comparing translated and not translated names.
This is an issue for mandatory fields, in non English languages.
Translated field names should be used only in messages.
The immediate action option clears (or not) the position of the events.
We use this to determine if the command should start at the given
position or merely activate the tool. This was being checked in the
menu options, which only activated for tool commands in the context
menu. Moving to the process event, we catch hotkeys as well.
This also restores the previous logic in eeschema that used a static
variable for storing wires rather than the private class variable.
Starting the draw event now picks up from the existing wires when
activated in immediate mode.
Fixes#3891 | https://gitlab.com/kicad/code/kicad/issues/3891
The parents are the only items that live in the RTree, so the rebuild
check needs to recurse into the sub structure to check for selection
Fixes https://gitlab.com/kicad/code/kicad/issues/3858
ADDED: Back annotation algorithm,
eeschema back annotation dialog
CHANGED: added some minor helper methods to SCH_REFERENCE_LIST and SCH_REFERENCE,
split SCH_REFERENCE_LIST::CheckAnnotation on 2 parts to reuse code
Bus submenus weren't sending events because tool wasn't set.
Net names need to be unescaped for display.
Unfolding wasn't drawing the new wire segments.
SCH_LINE_WIRE_BUS_TOOL could get caught in an infinite event handling loop.
Fixes https://gitlab.com/kicad/code/kicad/issues/3796
Scope: NETLIST_ITEM, CONNECTION_TYPE, ELECTRICAL_PINTYPE,
NET_CONNECTION, NETLIST_ITEM, GRAPHIC_PINSHAPE
Note, the pin type enum had PT_ added to the front to prevent
shadowing of the INPUT symbol on msys2 (see discussion at
c17c9960d8)
dynamic_cast could not resolve the cast chain leading to a null undo
point. Since we know the item to be LIB_ITEM, we can use static_cast
anyway and avoid the overhead.
Fixes#3771 | https://gitlab.com/kicad/code/kicad/issues/3771
This also removes vector cover types which do nothing except obfuscate
the underlying implementation.
Mainly changes SCH_SHEET_PINS and CONFIG_PARAM_ARRAY (which will soon
be replaced by Jon's new stuff).
* Ensure the lib edit undo checks for pointer validity
* Assert that the frames are the correct type (satisfies coverity)
* Convert C casts to C++ casts
It served us (mostly) well for more than a decade. It helped KiCad grow
before the std:: came into decent shape or speed. It was a good little
list.
RIP DLIST 2008-2020
This moves EESchema DLIST structures to rtree. These changes are more
fundamental than the pcbnew changes from 9163ac543888c01d11d1877d7c1
and 961b22d60 as eeschema operations were more dependent on passing
drawing list references around with SCH_ITEM* objects.
For legacy reasons, it stored left and right "spin" as flipped integers in the file format.
But the code handled the flip in multiple locations rather than just doing it on file io.
This change unifies the internal code and does the mapping in the file I/O.
* Split up the thirdparty code into the thirdparty folder (#3637)
* Create a new kimath static library containing all the math functions
This is part of cleaning the build system for #1906.
ADD: User can now decide to keep the hierarchy navigator open while working
on a schematic.
This behavior can be configured in eeschema->preferences->eeschema->Editing options.
When dragging we'll create new line segments between selection-edge
objects and things outside the selection that they're attached to.
These new lines have their IS_NEW flags set, but shouldn't fool us
into thinking that the selection contains pasted (or placed) items.
ADDED: a config option to select (when clicking on a pin) the parent symbol
or only the pin.
Previously, when cliking on a pin, the parent symbol was selected.
Allowing the pin selection is mandatory in cross probing, and to display the pin
characteristics in some cases, for instance if a pin is flagged by the ERC tooL.
There is no need to create a new root symbol and re-parent all derived
symbols when renaming a root symbol. Just rename the buffered root
symbol.
Test for duplicate symbol names when validating the properties dialog
information to prevent broken symbol pointers.
Fix a field drawing bug when editing derived symbols.
Fix bug to insure duplicate symbol names cannot exist in a library.
Fixes kicad/code/kicad#3654
Fixes kicad/code/kicad#3672
Apparently the schematic and symbol library editors now have common
selection filtering so checking for a valid LIB_EDIT_FRAME when
filtering for the schematic editor frame prevented all schematic
object from being selected.
The symbol editor selection criteria did not include LIB_FIELD objects
which allowed the root symbol name to be changed causing broken derived
symbol links. Disable the symbols fields from being edited when a
derived part is shown in the editor to prevent this.
Add a missing warning that deleting a root symbol used to derive other
symbols would also delete all derived symbols from a library. Give the
user a chance to cancel the delete operation in this case.
Fixes kicad/code/kicad#3654
Don't clobber value file when load aliases in legacy symbol library cache
parser.
Use actual symbol library LIB_PART pointer rather than a flattened copy
of the symbol. This fixed a bug when displaying the parent field in the
message panel for derived symbols.
Simplify the flatten code by copying the parent and updating the lesser
information from the inherited symbol.
This change completely removes the LIB_ALIAS design pattern an replaces
it by allowing LIB_PART objects to inherit from other LIB_PART objects.
The initial implementation only allows for single inheritance and only
supports the mandatory fields in the derived part because that is all
that the current symbol library file format will support. Once the new
file format is implemented and saving to the old file format is deprecated,
more complex inheritance will be added. The LIB_ALIAS information saved
in the document files was move into the LIB_PART object. This change
impacts virtually every part of the schematic and symbol library editor
code so this commit message is woefully incomplete.
REMOVE: Removed the symbol aliases concept from the schematic and symbol
editors and the symbol viewer.
NEW: Replace the symbol alias concept with simple inheritance that allows
a library symbol to be derived from another library symbol.
When dragging a bus the entry is connected to the bus so the wire
connected to the entry (if any) needs to stretch.
While an entry can connect in the middle of bus, it cannot connect
in the middle of a wire.
Fixes: lp:1849973
* https://bugs.launchpad.net/kicad/+bug/1849973
Copy/Paste should keep the original items' designation for all units and
conversion type. If it was specified in the original copy, we should
keep the same specification when pasting (but update for the current
frame)
The new connectivity algorithm had a tendency to cleanup
globally, but that could insert undo records from other sheets
into the current screen's undo stack. Needless to say, this
was a recipie for segfaults.
Fixes: lp:1846247
* https://bugs.launchpad.net/kicad/+bug/1846247
Right click is a pointing operation combined with a request for the
context menu. We need to highlight the user's intended object when they
have moved their mouse to a new element instead of showing the context
menu for the selected object.
However, in cases where the selection is difficult to make, it is
sometimes helpful to select the item first, then right-click. In these
cases, we keep the selection where the mouse remains inside the selected
object's bounding box.
When placing a new component in the schematic, this allows the user to
iterate through all units in the selected component without re-opening
the choose part dialog. It also allows the optional addition of
multiple copies of the same component to be placed in the schematic.
Fixes: lp:1806217
* https://bugs.launchpad.net/kicad/+bug/1806217
Adding a field to a selection changes the bounding box and count for
rotation. This can cause odd offsets when the field is rotated against
the selection center rather than the bounding box as well as with the
component.
Fixes: lp:1849078
* https://bugs.launchpad.net/kicad/+bug/1849078
The break wire command will break all wires at a point. If there are
multiple crossing wires, we need to check to see if a junction might be
required to reflect the new connection.
Fixes: lp:1848450
* https://bugs.launchpad.net/kicad/+bug/1848450
When we add enough SHEET_PINs that the vector has to grow, it
re-allocates the vector causing our for-loop to get its knickers
tied in a knot.
Fixes: lp:1842394
* https://bugs.launchpad.net/kicad/+bug/1842394
1) When sheet pins are on 3 or more sides there's no point in switching
the orientation to vertical.
2) Careful that we don't cause the sheet to walk when rotating and the
sheet-name or file-name is longer than the side it's on.
Fixes: lp:1841714
* https://bugs.launchpad.net/kicad/+bug/1841714
Also, if it can't be loaded then at least initialize it so that we
don't crash later (trying to access a NULL screen).
Fixes: lp:1841801
* https://bugs.launchpad.net/kicad/+bug/1841801
Saving individual parts of a schematic can break the schematic. This
moves the schematic save option to save all sheets rather than just the
current sheet.
Fixes: lp:1840383
* https://bugs.launchpad.net/kicad/+bug/1840383
They're now used for bus definition control characters.
Also fixes the sheet pin edit dialog to correctly escape/unescape
netnames.
Fixes: lp:1840834
* https://bugs.launchpad.net/kicad/+bug/1840834
1) don't ASSERT; use exceptions (which can be caught) instead.
2) clean up LIB_LOGGER so it's only used during sync
3) fix typos in wxLogMessage() calls so they produce output.
4) throw on unrecognized token in loadContent().
5) if clipboard can't be pasted as content then paste as text.
Fixes: lp:1840172
* https://bugs.launchpad.net/kicad/+bug/1840172
1) Add highlighting to simProbe and simTune tools.
2) Probe tool should accept wires and pins, not wires and components.
3) Give simulator window a flat look to match rest of Kicad.
4) Collapse whitespace out of simulator window.
5) Add some error messages.
6) Add some whitespace to simulation setting dialog.
When selecting items where the reference point is off-screen, GTK
would default the cursor to jump to the bottom of the screen.
Fixes: lp:1838843
* https://bugs.launchpad.net/kicad/+bug/1838843
The problem is that wxEVT_CHAR_HOOK doesn’t do the key translation
properly. wxEVT_CHAR does, but we only get to that if we skip the
event at the end of the tool’s event processing loop, which most tools
don’t do. (Selection tools, point editors, pickers, and a couple of
others do skip, which is probably why this didn’t get reported earlier.)
I played around with a couple of ways to fix wxEVT_CHAR_HOOK. Most of
them don’t work, and the few egregious hacks I tried weren't cross-
platform.
So I’m changing it so that most tools now skip at the end of their
event loops. I left out a couple that I felt were high risk (length
tuning, for instance). But there’s still enough risk that I’m 100%
sure it will break something, I just haven’t a clue what.
Fixes: lp:1836903
* https://bugs.launchpad.net/kicad/+bug/1836903
The point editor expects rectangles with a height and width > 0.
Previously, this constraint did not exist,
so some LIB_RECTANGLE graphic items can create issues when trying to move a corner.
Now, the LIB_RECTANGLE graphic item is normalized before trying to move a corner.
Because the pickers are called with an Activate()/Wait() pair, any
usurping tool gets in between the picker handling the cancel (due
to activation) and the picker client doing a PopTool(). The new
tool is therefore pushed before the old tool is popped.
Fixes: lp:1835907
* https://bugs.launchpad.net/kicad/+bug/1835907
This is based on the notion that in Kicad the start and end-points
are far more important (as they usually connect to other segments)
than the center is.
Includes the addition of an onSetCursor() handler which must be called
from both the GAL canvas AND the GAL backend (at least on OSX) to prevent
cursor flickering between (for instance) pencil and arrow.
Also includes new architecture for point editors which allows them to
coordiate cursors with the editing tools (so we can switch to an arrow
when over a point).
We were running into various corner conditions where a tool's event
loop would exit while the tool was still active, or the tool would
get popped while we were still in the event loop. (A lot of these
had to do with the POINT_EDITOR's, but not all of them.)
The new architecture:
1) tools always do a Push()/Pop()
2) everyone is responsible for their own pops; no more stack-clearing
on a cancel
3) CancelInteractive events go to all tools to facilitate (2)
This adds the functionality to add multiple labels to your schematic at
once by using spaces in the original label name.
Fixes: lp:1095113
* https://bugs.launchpad.net/kicad/+bug/1095113
It's a bit of a hack because they're statically initialized and
so we can't make use of the _() macro. We do still want it in the
code, however, because the string harvesting is based off of it.
Fixes: lp:1833000
* https://bugs.launchpad.net/kicad/+bug/1833000
If a tool called something like clearSelection while processing a
MOUSE_CLICK, the SELECTION_TOOL will pass the clearSelection
COMMAND_EVENT because it handles it as a transition, not as an
event. Because m_passEvent is effectively global, the tool manager
would then interpret that as passing the MOUSE_CLICK and we'd end
up processing the click by multiple tools.
There are a whole bunch of cases which all have to work:
regular move
move followed by drag
drag followed by move
move followed by duplicate
duplicate
paste
and all both with and without Warp Mouse on Move checked.
Also fixes the post-duplicate move to start at the cursor pos.
Also fixes the fact that duplicate wasn't getting its hotkey.
Fixes: lp:1830596
* https://bugs.launchpad.net/kicad/+bug/1830596
Seth Hillbrand
Marek Roszko
Roberto Fernandez Bautista
Wayne Stambaugh
Jeff Young
Mike Williams
Jon Evans
jean-pierre charras
Mikolaj Wielgus
luz paz
Ian McInerney
david-beinder
PJM
Jonathan Haas
James Jackson
Michael Kavanagh
Slawomir Siudym
Peter Montgomery
Werni
Franck Jullien
Franck Jullien
bjpiccioni
Alexander
Simon Richter
Seth Hillbrand
Alexander Shuklin
Maciej Suminski