When saving a library, check and report on libraries that do not exist
as well as those that exist but are read-only.
Fixes: lp:1769190
* https://bugs.launchpad.net/kicad/+bug/1769190
Changes SHAPE_CONVEX to SHAPE_SIMPLE to better reflect the limitations.
Changes SHAPE_LINE_CHAIN::PointInside calculation to allow points
strictly inside a line chain
Fixes: lp:1768862
* https://bugs.launchpad.net/kicad/+bug/1768862
Usually pads do not overlap. However custom pads are represented as
their convex hull, so they may enclose other pads. This change allows the
router to select the closest pad to the cursor position.
The roundrect_rratio token was missing a leading space which made the
file formatting different from all other formatting when using rounded
rectangle pads.
Fixes lp:1768355
https://bugs.launchpad.net/kicad/+bug/1768355
This is particularly important when bulk adding (by director, etc.)
as otherwise the user might end up having to click OK to many
many error dialogs.
Fixes: lp:1764057
* https://bugs.launchpad.net/kicad/+bug/1764057
Also fixes a bug where a FOOTPRINT_EDIT_FRAME was being passed
in to a PCB_EDIT_FRAME.
Also tidies up Modedit settings handling for settings which can't
be edited in Modedit's preferences dialog. They're now copied
from Pcbnew.
Fixes: lp:1768477
* https://bugs.launchpad.net/kicad/+bug/1768477
This partially reverts 36d36de and 3bac100, moving the legacy footprint
lock/unlock code from the autorouter (which remains disabled) to
pcb_edit_frame.
Old code failed to set the wxEventType during acceptance, and
failed to set the default button during initialization.
Fixes: lp:1768253
* https://bugs.launchpad.net/kicad/+bug/1768253
When reading netlist or updating board from schematic, if the
changes leave a zone with a net with no pads then change the
zone's net to the new net of one of it's connections.
Also improves update-board-from-schematic's dry run reporting
to include zone nets and single-pad nets.
Fixes: lp:1609401
* https://bugs.launchpad.net/kicad/+bug/1609401
Duplicate already works, so there's little reason to disallow
using the zone dialog to do it.
The legacy canvas can't be fixed because we'll immediately
union the two zones, resulting in a no-op.
Fixes: lp:1464677
* https://bugs.launchpad.net/kicad/+bug/1464677
Corrects an error in polyline estimation
Syncs graphics to world PNS by whole layer set rather than
individual layer at a time.
Prevents reloading of full pns TOOL_BASE during reset of tools unless
the tool is being activated.
Fixes: lp:1766626
* https://bugs.launchpad.net/kicad/+bug/1766626
For some obscure (for me) reason, the path separators in bundlepath are seen as escape seq, and the path can be incorrectly handled
(when \n or \r are found in this string).
it happens only for this path, not for other paths in LoadPlugins.
For bundlepath parameter, unix separator is now used.
Fixes: lp:1766879
https://bugs.launchpad.net/kicad/+bug/1766879
it was due to a incorrect behavior of TRACK::GetBestInsertPoint( BOARD* aPcb )
Also: update comment for this method.
Fixes: lp:1767061
https://bugs.launchpad.net/kicad/+bug/1767061
This really needs to get put into the VIEW_CONTROLS for all the
tools, but that's probably a bit too risky for 5.0 at this
point.
Fixes: lp:1766547
* https://bugs.launchpad.net/kicad/+bug/1766547
Previous algorithm used a static variable which it decremented
for each new unconnected track, but this resulted in the router
marking earlier fixed segments as collisions (because they
would get set to netcode = 0 when "fixed").
Fixes: lp:1762043
* https://bugs.launchpad.net/kicad/+bug/1762043
This had been removed along with autorouter but its functionality is
still desired. If/when the autorouter is resurrected, these IDs will
need to be deconflicted.
Fixes: lp:1766550
* https://bugs.launchpad.net/kicad/+bug/1766550
Corrected polygon export missing vertex.
Set pads to export on copper layer when not masked, keeping visual
output similar to physical.
Fixes: lp:1766634
* https://bugs.launchpad.net/kicad/+bug/1766634
If the initial pad was a custom pad converted in a usual pad + graphic items by the command:
"Explode Pad to Graphic Shapes"
the "old" primitives were not cleaned, and the new created pad contained these old primitives, regardless the new selected shapes.
(Usual case when a user want to edit a custom shape)
Also removes parallel implementation in favour of using the
normal one (with a new wxGauge-backed PROGRESS_REPORTER).
Fixes: lp:1764196
* https://bugs.launchpad.net/kicad/+bug/1764196
The hotkey fix committed in 53b1ec81 broke non-us keyboards. Change the
hotkey help hotkey from '?' to Ctrl+F1 to prevent the hotkey list dialog
from being shown when placing a bus wire junction in Eeschema and when
changing the track posture in Pcbnew. This is still broken in the GAL
framework.
When updating toolbars make sure the events are coming from the
toolbar in question (and not the menus which share the same ID).
Fixes: lp:1763563
* https://bugs.launchpad.net/kicad/+bug/1763563
Symbol/footprint library and entry have the same set of forbidden
characters with a single exception, space character. To accommodate for
this difference, LIB_ID validation and fix methods have been extended to
specify the LIB_ID type that is checked (schematic/board).
LIB_ID::HasIllegalChars() and LIB_ID::FixIllegalChars() had two different
sets of characters treated as invalid in LIB_IDs. The set has been
factored out to another function to avoid duplication.
Some changes (enable/disable a layer) set the dirty bit even for empty boards.
So when closing pcbnew, the dialog asking for saving the board was shown, even when no board loaded.
If the track being routed is unconnected, or the end-point
clicked on is unconnected, allow the connection by changing
the unconnected item to the net of the connected one.
Fixes: lp:1548129
* https://bugs.launchpad.net/kicad/+bug/1548129
When multiple cut commands were issued, the cut command handler would
restart multiple times and keep running until the handler that was
invoked first finishes. As all handlers kept a selection copy, they
would try to save the deleted items to the clipboard resulting in a
crash.
Fixes: lp:1761221
* https://bugs.launchpad.net/kicad/+bug/1761221
Also update the rest of the symbol-chooser usage to current
specs, including examining the timestamp to see if the list
needs loading at all.
Partial fix to: lp:1760936
* https://bugs.launchpad.net/kicad/+bug/1760936
When a new footprint is created, CreateNewModule() added it to a dummy
board in the footprint editor. If a footprint was indeed created (the
action has not been aborted) then the dummy board was cleared,
destroying the just created footprint. Also, the new footprint is later
added with AddModuleToBoard() call.
Fixes: lp:1761052
* https://bugs.launchpad.net/kicad/+bug/1761052
Previous implementation refilled zones every time they have been
unselected. This patch adds a flag that tracks whether the
zone has been actually modified, so it will be refilled only when
necessary.
Fixes: lp:1760903
* https://bugs.launchpad.net/kicad/+bug/1760903
If a polygon has fewer than 3 points, it is invalid. We need to
register this as failure, otherwise we save the formatting/closing
s-expr for the polygon without the actual polygon points. This breaks
the footprint and board.
Don't re-save all files in a library when editing a single footprint.
This creates issues with formatting in version control systems where
unmodified files are re-written without being explicitly changed by the
user.
Fixes: lp:1752991
* https://bugs.launchpad.net/kicad/+bug/1752991
While we already cache the loaded footprint files, parsing said files
into the list is also time-intensive. Since the FOOTPRINT_LIST is
already hash-stamped against the current timestamps of the files that
make up the list, sharing a single copy of the list is quite
straight-forward.
The zeroth index is reserved especially for the <no net> tag, so we need
to keep the current net at 1 or greater to keep it connected.
Fixes: lp:1758488
* https://bugs.launchpad.net/kicad/+bug/1758488
We do not modify the underlying board when saving. Previously only the
visible layers were saved. This created a discrepancy between the board
that the user was editing and the board that was saved to disk.
Fixes: lp:1754049
* https://bugs.launchpad.net/kicad/+bug/1754049
- vias were always left selected, include vias in tracks filter - as in legacy
- make text filtering work
- cleanup drawings filtering code
- hide checkbox "Include items on invisible layers" because it does not work in GAL
If objects are at the clearance limit, they qualify as passing DRC.
Therefore, all comparison functions that indicate failure should be
strictly greater than or less than while all comparison functions that
indicate success (in the DRC) should be greater/equal or less/equal.
This also corrects a rounding error at the nm scale and handles
scaling zero-length and large segments correctly.
Fixes: lp:1756403
* https://bugs.launchpad.net/kicad/+bug/1756403
Fixes: lp:1593373
* https://bugs.launchpad.net/kicad/+bug/1593373
For some DRC checks, the location of the marker is not the location
of the first item in the resulting DRC_ITEM, so centering the screen
on PointA of the DRC_ITEM can be confusing.
The text height and thickness settings were never implemented so they
didn't get updated when the options were changed. Added the missing
code to update both parameters.
Added text width parameter so text height and width do not need to be
the same value. Currently both the value and reference fields are set
to the same height and width. Please feel free to change this if you
feel the need to have separate text settings for both the value and
reference fields.
Fixes lp:1751309
https://bugs.launchpad.net/kicad/+bug/1751309
In fact radius is not used initialized, as the scope where it is
used (while loop) is dependent on the preceding if( w.curve ) clause
that initializes 'radius' variable.
- changed EAGLE_UNIT enum names from EAGLE_* to EU_*
- renamed ToNanoMeters() to ConvertToNm() and added a comment
- added ToMils() and ToNanoMeters() method
pcbnew_action_plug tracks items that were modified within a plugin. In the case of
deletion, the old object is no longer valid. This commit turns off the call to delete
if a plugin is active.
CTRL+{X,C,V} used to be handled both by the legacy hotkey system that
generated ID_EDIT_{CUT,COPY,PASTE} wxCommandEvent, and the Tool Framework
hotkey system.
Fixes: lp:1749549
* https://bugs.launchpad.net/kicad/+bug/1749549
The parameter check was triggered by a grid clear event which was sent
after the current page number was changed, creating a mismatch between
the old and new parameter list lengths.
Fixes: lp:1754738
* https://bugs.launchpad.net/kicad/+bug/1754738
Eagle tracks can have curves. We approximate this using the
segments_per_360 define. This results in 32 segments for a 360-degree
curve. We could increase this value for curved tracks to get closer
tracking with the Eagle layout if needed.
Fixes: lp:1753289
* https://bugs.launchpad.net/kicad/+bug/1753289
This primarily keeps us from overriding "truth" with data that
might not have even been saved when closing ModEdit.
Fixes: lp:1752543
* https://bugs.launchpad.net/kicad/+bug/1752543
Build pcbnew_kiface files as object target that can then be linked in to pcbnew.kiface and _pcbnew.so
Only create _pcbnew.so target if scripting modules is enabled.
For linux builds only.
PCB_BASE_FRAME::PlaceModule() calls CN_CONNECTIVITY_ALGO::Update()
on the new footprint that does not have nets assigned. The Update()
method first removes the footprint (but it has not been added, so
nothing happens) and then adds it with all pads marked as not connected.
Later, when BOARD_COMMIT is pushed - it tries to add the same footprint
again with nets assigned, but the pads are already registered, therefore
they are discarded.
To prevent this, PlaceModule() does not call CN_CONNECTIVITY_ALGO::Update()
for the just created footprint, as it is handled by BOARD_COMMIT later.
There are a few steps to assign correct nets to zones/track/vias:
- create a net name to pad map
- perform 2 stage netlist update (fix timestamps and then references)
- compare new net names with the previously created net map, save the
differences as a old net to new net map
- remap zones/tracks/vias using the map created in the previous step
The main advantage here is it correctly handles unnamed nets (i.e. ones
without any net labels attached), which might be changed by KiCad
netlist generator.
It's too expensive to fetch the timestamps when the github
server is busy. See Dick Hollenbeck's comments at the top of
github_plugin.cpp for more info.
Also adds some safety to the other caching algorithms after
seeing github_plugin's wild-west usage of the kicad_plugin.
Fixes: lp:1753143
* https://bugs.launchpad.net/kicad/+bug/1753143
When aligning module centers, it can be hard to determine which item
will be chosen for the alignment target when it chooses based on the
median of the center values. Instead, this patch chooses the alignment
target as the top and left most items of the Y and X centering,
respectively
When aligning in pcbnew, check for pad/module locks before performing a
move and query the user.
When aligning on pads, don't move the pad without moving the footprint,
so we don't break footprints.
Fixes: lp:1751352
* https://bugs.launchpad.net/kicad/+bug/1751352
Remove a throw in the Eagle importer which just threw a wedge
in the works, and return a default modTime when the file hasn't
been set yet.
Give the gEDA importer the multi-file cache management performance
improvements from the kicad_plugin.
Fixes: lp:1752719
* https://bugs.launchpad.net/kicad/+bug/1752719
reimplement the centerpoint distribution and use it when the items to be
distributed overlap leaving no gap to use for spacing
Fixes: lp:1748763
* https://bugs.launchpad.net/kicad/+bug/1748763
Dispatches a TA_MODEL_CHANGE event when the design rules dialog is
closed, the intention being to cause the router tool to re-sync its
design rule information
Fixes: lp:1462929
* https://bugs.launchpad.net/kicad/+bug/1462929
Frame, dialog and config file couldn't agree on whether to use
internal units or not.
Frame now stores internal units, and they're now mapped on the
way in/out of the config file. Dialog was already assuming they
were stored in internal units (though they were previuosly not).
Fixes: lp:1751435
* https://bugs.launchpad.net/kicad/+bug/1751435
Too many external applications fail to touch the parent directory.
Also removes FP_CACHE_ITEM lastMod times and dirty flags as we've
always loaded libraries atomically anyway.
Claws back some of the performance lost by being more efficient
with cache management for sequential calls to Enumerate and then
Load.
Fixes: lp:1750936
* https://bugs.launchpad.net/kicad/+bug/1750936
Add a library selector to the save dialog. Initialize it to the
footprint's library. This way a straigh-up save will do what's
expected.
However, the user can still select the active library (or any
other library) if they really did want to move the footprint.
Fixes: lp:1750918
* https://bugs.launchpad.net/kicad/+bug/1750918
Also adds indicators in layers palette for feedback.
Also generates sized images for all indicators instead of using
scaled bitmaps (which didn't look great).
Also fixes a completely unrelated typo in a UI string.
Pads and footprints rendering switches in Render tab were working incorrectly, as described in bug report:
https://bugs.launchpad.net/kicad/+bug/1743890
This patch fixes it and makes GAL behave as the legacy canvas.
Fixes: lp:1743890
Includes some dialog changes to go with the menu update.
Includes promoting the Pcbnew graphics mode back to main menu.
Includes renaming Graphics modes to Toolsets.
Move sketch mode stuff from Display Settings to View menu.
Move Icons in Menus from View menu to General Preferences.
Move Icon Scaling from Display Settings to General Preferences.
Regroup some items in both dialogs for better comprehension.
Also fixes:
- forcing the annotation scope to "full schematic" when run
as a prerequisite to Generate Netlist.
- a long-standing bug where displaying extra items in a dialog
would mess up the height of the HTML_REPORT_PANEL (becasue
we were setting the html window's height rather than its
parent flexgrid.
- initializing the annotation radio buttons to safe values
(full schematic and keep existing)
Fixes: lp:1750062
* https://bugs.launchpad.net/kicad/+bug/1750062
NEW: add new align icons based on the existing align_items.svg icon, just flipped and rotated
CHANGED: change the context menu to use the new align icons
After Eagle project import, schematic and board netlists are inconsistent:
footprints do not have sheetpaths assigned, schematics are unannotated.
One can update netlist either by references or timestamps, but timestamps
are empty in pcbnew, and updating by reference must by preceded by
annotation which may lead to broken links between board and schematics
(Eagle does not require references to end with a number, so KiCad annotater
will add numbers in such cases).
To fix the problem, there is a two step netlist update:
- update by reference without the annotation step, to assign
correct sheetpaths to footprints
- update by timestamp, after symbols are annotated, in order to
update references in the board
Fixes: lp:1748502
* https://bugs.launchpad.net/kicad/+bug/1748502
Board update KiWay request may now contain options in the message
payload:
- "no-annotate": do not enforce annotation
- "quiet-annotate": annotate without displaying a dialog
- "by-reference": update netlist by reference, no dialog displayed
- "by-timestamp": update netlist by timestamp, no dialog displayed
Footprint properties dialogs: add test for negative net clearance, similar to the Pad properties dialog test.
Add also a info message in dialogs, to avoid mistakes when setting the local clearances.
Track dragging forces the cursor position, which is still kept when PNS
router is launched again. It is avoided by resetting the force cursor
position option before running the event loop.
Tools preserve their state between runs, so it could happen that
activating a tool restores the state when autopanning is enabled, even
though it should not be.
Fixes a bunch of errors:
- libedit and libbrowser would zoom to bounding box but centre on canvas
- libedit, libbrowser and gerbview didn’t take the scroll bars into account
- pcbnew didn’t take scroll bars into account or apply the 10% margin
- appending a board file would re-centre, but not re-zoom
Fixes: lp:1504302
* https://bugs.launchpad.net/kicad/+bug/1504302
Commit complementary to 4f0c9b6b. In case there were multiple tracks
under the cursor, disambiguation was shown twice because
SELECTION_TOOL::selectConnection() cleared the selection and requested
it again.
Also adds Cancel context menu items for Place Footprint,
Place Target, Place Drill Origin and Place Grid Origin tools,
as well as the standard Zoom and Grid choices.
Removes the Paste context menu item from the Place Drill
and Place Grid Origin tools.
Fixes: lp:1568396
* https://bugs.launchpad.net/kicad/+bug/1568396
Second disambiguation menu was caused by another call to
SELECTION_TOOL::RequestSelection() meant to get the list of
connected tracks. When there were only footprints under the cursor,
it asked the user again to pick an item to remove.
Fixes: lp:1748521
* https://bugs.launchpad.net/kicad/+bug/1748521
Smartens the cache freshness checking, and adds checksums of
constituent-directory last-mod-dates to the footprint info
list.
Also inserts the dataPtrs into the list at the same time as
the text to keep wxWidgets from measuring the width of the
text twice (yes, really). And converts the list to default-
column widths in case the wxWidgets patch is present to
greatly speed list creation (by not measuring all that text).
On my machine drops the first-load time from 4s to 2.5s and
the subsequent-load times from 2.5s to < 1s. With the
wxWidgets patch subsequent-loads become near-instantaneous.
Many had already been fixed but weren't working on Mac because
of the DIALOG_SHIM hack (now fixed). Others hadn't been updated
yet. Also includes some cleanup for elipses in buttons and
layout.
Fixes: lp:1748506
* https://bugs.launchpad.net/kicad/+bug/1748506
Check the footprint library path modification against the last load
time and reload the cache if the path modification time has changed
when a new file is added to the footprint library path.
Fixes lp:1727977
https://bugs.launchpad.net/kicad/+bug/1727977
Make refilling zones during DRC optional to prevent the board from being
changed by changes in the polygon filling. Default to off to prevent
changes by default.
Fixes lp:1721547
https://bugs.launchpad.net/kicad/+bug/1721547
* Cleanup .fbp file, and remove fixed sizes in a few widgets.
* use wxID_CANCEL in close button ID, to allow closing the dialog by the ESC key
Fixes: lp:1748626
https://bugs.launchpad.net/kicad/+bug/1748626
On OpenMP single core systems only the first thread launched. It means
that only the UI updating thread was running, without the one
responsible for actual computation. It is fixed by enforcing at least
two threads.
This changes the distribute horizonally and vertically tools to place
items with constant gaps between them. The previous implementation put
item centers evenly apart but thereby ignored the relative width and
height of the items (i.e. wide items appeared closer together than
narrow items).
Fixes lp;1745366
https://bugs.launchpad.net/kicad/+bug/1745366
Using footprint rects instead of the larger bounding box means that
reference and value texts no longer influence the positioning of the
footprint in unexpected ways. Treatment of non-module items is
unchanged.
This removes a line that deletes the templates created from the eagle
library every time EAGLE_PLUGIN::init( const PROPERTIES* aProperties )
is called, which seems quite often. The templates are deleted though if
the library path for the plugin is changed or the file has been
modified.
Fixes: lp:1731802
* https://bugs.launchpad.net/kicad/+bug/1731802
Launching right click context menu overrides the cursor position, so all
actions executed by the tools will be performed in the right click
position. It created an issue, as the overridden cursor settings were
saved into wrong context if there was another tool activated in the
meantime.
Current implementation saves cursor settings for all tools and restores
them once the right click context menu disappears.
Fixes: lp:1745981
* https://bugs.launchpad.net/kicad/+bug/1745981
Fixes: lp:1746507
* https://bugs.launchpad.net/kicad/+bug/1746507
* Specctra exported polygons are now closed (as required)
* export custom shape is provided in code, but not activated, because i have no way to text it
* fix Specctra export dialog (replace OK and Cancel buttons by only one Close button)
Keystroke zoom (F1/F2) always centered the screen, because it
was handled as ID_POPUP_ZOOM_IN event. Mousewheel scrolling
was ok, because it is handled using different event based
on the configuration.
This patch introduces special event ids for keystroke
zooming that are then properly translated to either
ID_POPUP_ZOOM_IN or ID_OFFCENTER_ZOOM_IN depending
on the configuration.
The same issue is fixed for legacy canvas pcbnew.
Fixes: lp:1742567
* https://bugs.launchpad.net/kicad/+bug/1742567
Signed-off-by: Martin Sivak <mars@montik.net>
PICKED_ITEMS_LIST knows the architecture of the undo commands so
that it can delete those ITEMs which it owns. This represents poor
encapsulation so instead of adding yet another case, I added a
UR_TRANSIENT item flag which is set by callers whenever they create
new objects to “give to” the undo/redo stack. This allowed some
cleanup of other code, but cleaning up UR_DELETE and UR_WIRE_IMAGE
will be a bigger task and have to wait for another day.
Fixes: lp:1542018
* https://bugs.launchpad.net/kicad/+bug/1542018
The undo/redo operations are essentially the same as for
UR_CHANGED: we store both the origin marker item and a copy
of it and flip back and forth between the two. This also
required the implementation of clone() for the markers.
The ORIGIN_VIEWMARKER is moved from being a subclass of
EDA_ITEM to BOARD_ITEM to facilitate the use of a UR_CHANGE-
like implementation without having to know the internals
of the ORIGIN_VIEWMARKER.
In the command processors, the setting of the origins is
broken into two parts: one for UI-level access which includes
setting up undo, and one for low-level access which does not.
The undo/redo code itself of course uses the lower level.
Fixes: lp:1542018
* https://bugs.launchpad.net/kicad/+bug/1542018
This commit also adds a no-selection-mode, which allows the user
to specify what gets update (through the various match modes).
The no-selection-mode is accessed via the Edit menu, although
it could also be applied to the context menu.
Fixes: lp:1466857
* https://bugs.launchpad.net/kicad/+bug/1466857
Rename GetPolyPoint() to BuildPolyPointsList(), because GetPolyPoint() looks like an accessor, but it is not an accessor.
(Using it as accessor can creates a *very long calculation time* for very basic access to polygon vertices)
Fixes: lp:1745050
https://bugs.launchpad.net/kicad/+bug/1745050
Fix also option tool "show footprint texts in outline mode" code,
but because there is no code to show texts in outline mode in GAL canvas, this option still works only in legacy canvas
When a rotation/flip command was issued when a newly placed text
was hovering over an existing item - the item underneath would be
affected by the command and the new text would be discarded.
Fixes: lp:1744152
* https://bugs.launchpad.net/kicad/+bug/1744152
Some actions, such as select trivial connection, don't need the
user to choose which trace at a corner to start from -- either
one will do. Same for moving a simple trace corner.
Likewise, Edit in Footprint Editor shouldn't ask if you mean the
footprint or the pad. Obviously it's the footprint.
This change adds a CLIENT_SELECTION_FILTER which allows clients
to do tool- or action-specific filtering of the selection before
the disambiguation menu is run.
It also removes some tool- and action-specific code which was
in the selection_tool and shouldn't have been.
Fixes: lp:1708869
* https://bugs.launchpad.net/kicad/+bug/1708869
This fixes the layer comboboxes, the copper zones properties
dialog, and the differental-pair icon in the htoolbar.
Fixes: lp:1741049
* https://bugs.launchpad.net/kicad/+bug/1741049
Gal mode: graphic cross-air cursor moved on items when clicking on & DRC error, like in legacy mode.
Make popup menu shown when right clicking on a DRC error item working.
Now, if not yet opened, the schematic editor frame is created, and shown iconized.
(although iconize it is perhaps not the best option)
It fixes a few (minor) issues (when the schematic editor frame is created, but not shown):
- On OSX the schematic frame is shown as a "ghost" frame.
- If later, the schematic editor is opened from Kicad, a message saying the schematic is already opened is shown.
This is technically true, but unexpected by user.
- If symbols need an annotation, the annotation dialog is opened, can can modify the schematics.
So it could be better to really open the schematic editor frame.
The calculation was made too early, before removing insulated islands.
Note: filling zones with segments is an old option, not very useful:
using only polygons has never created issues in gerber files.
The 3D viewer panel had a default size that was causing sizing issue
with the footprint properties dialog. Set the default size to -1;-1
and set the proportion setting to 1 when adding the panel to the sizer
which allows the panel to file in the correct size.
Fixed some minor control spacing issues in the footprint properties
dialog properties tab.
Please note that is only a partial fix for this issue. There is still
too much vertical space which is partially due to the use of wxSpinCtrl
instead of wxDoubleSpinCtrl.
Fixes lp:1742701
https://bugs.launchpad.net/kicad/+bug/1742701
Major cleanup of many icons (started as a simple effort to tweak libedit and modedit icons)
Ref: https://lists.launchpad.net/kicad-developers/msg32860.html
* Each application icon has been updated
* Consolidated icon "modifiers" across many icons
* Replaced confusing arrows with "load" and "save" icons
* Slight code updates to reference correct icons
* Consolidate multiple representations of single icon type(s)
This is meant as a stopgap for 5.0, with plans to add proper scaled
icons in the 6.0 cycle. A function KiScaledBitmap() is added, which
works like KiBitmap() except it scales the bitmap according to the
calling window's font size. Controls have been added to all the main
applications to let the user select scaling manually (these were omitted
from smaller apps that didn't already have a place to put them).
In addition, in eeschema only, the pixel height of the system font is
shown in the options dialog for diagnostics. This is only for collecting
feedback before 5.0 release from users with different displays and will
be removed.
In high-contrast mode, items that don't exist on the current layer are
not selectable, but this is problematic since there are library
components that only exist in the silkscreen layer (logos, etc).
By adding one of the silkscreen layers to the ViewGetLayers() output,
these components are now editable when viewing the silkscreen layer in
high-contrast mode. Silkscreens attached to footprints that have pads
or drawings on non-silkscreen layers are still not selectable.
Fixes: lp:1741350
* https://bugs.launchpad.net/kicad/+bug/1741350
Also, remove a wxPanel border as it makes device-independent sizing
nearly impossible. For some reason wxPanel::GetClientSize() is returning
garbage here and breaks centering text without fudge factors. I think it
still looks good without the border, maybe better.
- Add helper methods for DPI-independent sizes
- Make splitter sashes visible on macOS
- Remove SetSizeInChars() - wx has a built-in way that I missed
- DIALOG_CHOOSE_COMPONENT: DPI-indep splitter sizes
- DIALOG_RESCUE_EACH: DPI-indep default size and sensible HTML window
size
- COMPONENT_TREE: DPI-indep sizing
- DIALOG_FP_LIB_TABLE, DIALOG_SYMBOL_LIB_TABLE
Change term "Flip Horizontal" to "Mirror About Horizontal(X) Axis" in
the schematic editor symbol context menu to improve clarity.
Change term "Flip Vertical" to "Mirror About Vertical(Y) Axis" in the
schematic editor symbol context menu to improve clarity.
Change to the same mirror terminology in the block context menu.
Change "Exchange Footprint" to "Change Footprint" in the board footprint
context menu for improved clarity.
Fixes lp:1740593
https://bugs.launchpad.net/kicad/+bug/1740593
If the client tool indicates it isn't happy for us to continue
(because, for instance, the user has cancelled the Zone Properties
dialog), then make sure we don't capture the mouse.
Fixes: lp: 1740780
* https://bugs.launchpad.net/kicad/+bug/1740780
The previous algorithm stopped whenever it entered a pad, which
sometimes leaves small track segments inside the pad. This one
keeps going as long as each segment gets us closer to the center
of the pad.
Fixes: lp:1662398
* https://bugs.launchpad.net/kicad/+bug/1662398
This patch adds functionality to the Pcbnew draw tool to show the dx and
dy of the current segment being drawn if the relative origin (pressing
spacebar) is not already set (i.e. if those coordinates are ( 0, 0 ) ).
You can set the relative origin while using the draw tool by pressing
spacebar. The relative origin is reset on exit of the tool.
fixes: lp:1736133
* https://bugs.launchpad.net/kicad/+bug/1736133
Passing an empty path to the 3D model select dialog results in the file
select control displaying the root path which requires the user to drill
down to get to the 3D models. Use the KISYS3DMOD path as the default
and fall back to the project path as required for the initial file
select control path.
Clean up some coding policy violations.
Fixes lp:1737094
https://bugs.launchpad.net/kicad/+bug/1737094
Improve dialog layout and fix UI policy issues with all of the dialog
boxes in the Gerbview and Pcbnew code paths.
Updated the use of component to footprint where appropriate.
Replace all instances of "component" and "part" with "symbol" when
referring to schematic and library symbols.
Replace all instances of "component" with "footprint" when referring to
board and library footprints.
Minor dialog layout fixes to some of the dialogs impacted by the UI
string changes.
Refresh is used in the python domain to refresh the display with the current
design. If something has changed, board connectivity likely needs rebuilding.
If using GAL canvas, update its display db.
Improved the selection heuristics to keep footprints in the
disambiguation menu when they contain pads with high pad-to-footprint
area ratio.
In other words: make it possible to select a footprint when
most of its area is taken by a pad. Previously pads were given the
priority, so it was very tricky to select the parent footprint.
Fixes: lp:1739425
* https://bugs.launchpad.net/kicad/+bug/1739425
To avoid situations when a large footprint covering most of the board
area (e.g. shield connector) is always selected, even when user clicks
in a seemingly empty spot, a simple filter has been added. In case
the footprint area covers more than 90% of the view area, the large
footprint is not selected. This way large footprints do not disturb
editing when the zoom is high enough.
Fixes: lp:1636214
* https://bugs.launchpad.net/kicad/+bug/1636214
A few methods differed by the number or type of arguments in derived
classes. They were changed to match the base class method signature and
marked as 'override'.
Module placer did not mark the newly placed modules as selected,
but all edit functions (rotate/place/etc.) rely on getting a selected
item. When a rotation/flip command was issued, the newly placed module
was dropped and the one underneath the cursor has been rotated.
To fix this the newly placed modules are marked as selected.
It also simplifies the placer code a bit.
Fixes: lp:1738148
* https://bugs.launchpad.net/kicad/+bug/1738148
Revert() method was still not aware of CHT_DONE flag, therefore
the switch statement was always invalid. To fix it, the commit
type is split to type and flags as is done in Push() method.
Zones: it turned out that for every zone point, the set of hatch lines
has been drawn, resulting in numerous redundant lines. Now the set is
drawn only once per zone.
Custom shape pads: as GAL supports SHAPE_POLY_SETs, there is no need to
create a temporary vector to copy there a list of points to be drawn.
Changed the drawing calls to use SHAPE_POLY_SETs directly.
Thanks to Andreas Buhr patch, code for drawing filled polygons and their
outlines has been unified. Previously it was done by changing the
drawing method (GAL::DrawPolygon() vs GAL::DrawPolyline()), now it is
done by modifying attributes (stroke/fill).
If the object changes between a TA_CONTEXT_MENU_UPDATE
event and a TA_CONTEXT_MENU_CHOICE event (usually as
a result of a cancel), the old code would leave the
last item hidden.
Fixes: lp:1737562
* https://bugs.launchpad.net/kicad/+bug/1737562
Moved a DRC function (BOARD::Test_Drc_Areas_Outlines_To_Areas_Outlines)
from BOARD class to DRC (DRC::TestZoneToZoneOutline). Added BOARD_COMMITs
to handle marker visibility updates.
Fixes: lp:1619124
* https://bugs.launchpad.net/kicad/+bug/1619124
Delete events when using GAL are handled by only one tool handler
instead of ROUTER_TOOL and EDIT_TOOL both deleting items.
Fixes: lp:1715158
* https://bugs.launchpad.net/kicad/+bug/1715158
This target seems to only create empty makefiles, tested on linux. And I
can not find any references to it in any of the current CMakeLists. Lets
remove it.
- Reverts behaviour of 3e71ed2421
- 3D model offset now explicitly written in mm, using "offset" tag
- Any read "at" tag is converted from inches to mm
- This will not break any 3D model offset when reading files
- It will however render files incompatible with old versions
LAYER_NON_PLATED to LAYER_NON_PLATEDHOLES
LAYER_PADS_HOLES to LAYER_PADS_PLATEDHOLES
LAYER_PADS to LAYER_PADS_TH
and add comments and fix a render issue in gal mode for non plated holes.
Opening Properties dialog normally does not ask the user to confirm the
action, even for locked items. The exception was a case when there was
nothing selected and Properties dialog was invoked via its hot key -
then SELECTION_TOOL::RequestSelection() tried to get the item under the
cursor, verifying the lock flag.
Fixes: lp:1734537
* https://bugs.launchpad.net/kicad/+bug/1734537
This patch enables math expression evaluation for most of the text input
controls in pcbnew.
NEW: pcbnew text input controls are able to evaluate simple
mathematical expressions, including distance units (e.g. 5.0+(2*1.2mm)).
Added new file connectivity.i to expose CONNECTIVITY_DATA to
python. enables access to d_pads from nets.
Added typemap to board_connected_item.i. since board_connected_item
doesn't use virtual inheritance, when returning a std::list of these
items, the typemap populates the return list with the child
types. This enables python scripts to use the full interface of those
classes (pad, track, zone)
Added typeinfo.i to enable passing a list of KICAD_T values to methods
GetNetItems. This list acts as a query filter. typeinfo.i is included
from pcbnew.i right after kicad.i (instead of in board.i like the
others) typeinfo.h is already being included kicad.i so to ensure the
typemap(s) are properly applied I put them next to each other.
The two new files (typeinfo.i and connectivity.i) were added to
pcbnew's CMakeLists.txt as dependencies.
A change in commit 5731000135 caused kicad to stop allowing users
to move items like footprints, arcs and lines using anchors other
than the center point.
This was caused by the new code that stores reference points for
clipboard pasting, a call to updateModificationPoint() prevented
some old code paths from executing, which caused the selection to
snap into the cursor, always using the center anchor.
This fix moves the call within the if-cases that need it, and adds
a ClearReferencePoint call when the selection is "dropped" to allow
the user to grab the same selection again from a different anchor.
Fixes: lp:1722512
* https://bugs.launchpad.net/kicad/+bug/1722512
Jeff Young
Seth Hillbrand
jean-pierre charras
Maciej Suminski
Wayne Stambaugh
Tomasz Włostowski
Andrzej Wolski
Simon Richter
Jean-Samuel Reynaud
Carsten Schoenert
Mario Hros
Kristoffer Ödmark
Russell Oliver
Jon Evans
Alessandro Gatti
Miles McCoo
hauptmech
Diego Herranz
Michael Kavanagh
Robbert Lagerweij
Dan Weatherill
Damien Espitallier
Martin Sivak
Michael Geselbracht
Oliver
Chris Pavlina
Camille
Christoph Riehl
Mark Roszko
Bernhard Stegmaier
Eldar Khayrullin
Henner Zeller
Nick ?stergaard
Jose I Romero