1) Separate out CONSTRAINT types
2) Filter both source and dest pads/vias for drilled holes when doing
hole-to-hole checks. We were checking the items being put into the
DRC RTree, but not the items we were scanning.
3) Add hole clearance to Board Setup Constraints panel.
Fixes https://gitlab.com/kicad/code/kicad/issues/6546
Fixes https://gitlab.com/kicad/code/kicad/issues/4683
So the new steals-focus protection stuff works well when there's a
focused control, but not as well when there's a modal dialog up which
happens not to have a focused control (or worse, a focusable control).
This adds a second mechanism for also checking to see if a modal dialog
is up (something that wxWidgets, true to form, makes very difficult).
Fixes https://gitlab.com/kicad/code/kicad/issues/6520
Rotate text using the Rotate90() function which gets the orientation
right.
Also, when calculating the center point for rotation, don't include
labels if the selection contains other stuff. It just makes the
rotation odd, and tends to cause walking when continuing to rotate
(due to keep-upright being non-symmetrical).
Fixes https://gitlab.com/kicad/code/kicad/issues/git
Copy to clipboard save items (using S expr description) using wide strings
(not UTF8 encoding).
But Paste from clipboard was not converting the wide string to UTF8 string
when getting the stored data to send it as std::string to the S expr reader.
Fixes#6449https://gitlab.com/kicad/code/kicad/issues/6449
It shows much more detail. Removes some nag dialogs and places
hypertext links in others.
Also fixes the auto-layer-showing to correctly show Edge.Cuts or
F.CrtYd or B.CrtYd for errors relating to them.
Fixes https://gitlab.com/kicad/code/kicad/issues/6446
1) Generalize SCH_ITEM owners (SCH_COMPONENT, SCH_SHEET, and now
SCH_GLOBALLABEL)
2) Generalize hypertext items
3) Use SCH_FIELD autoplace infrastructure for placing intersheet
references
4) Use textVar infrastructure for buildin intersheet references.
As an important side-effect this also fixes the undo issues with
intersheet refs.
On non-Unix, the platform selection is in platform.h, not on the command
line using the preprocessor macros from wx-config.
<wx/setup.h> relies on the platform being selected correctly, if it is
included directly, it cannot determine the correct configuration with
Visual Studio.
wxWidgets 3.1.5+ on Linux will compile with the Wayland EGL
canvas as the backend instead of the X11 backend. This requires a
version of GLEW compiled with the proper EGL defines and a different
header/code for certain parts that are X11 GLEW specific.
This introduces an in-tree version of GLEW that will be built with the
GLEW_EGL flag then statically linked into the KiCad executables when
EGL support is needed.
It was causing problems with surprising behaviour and issues with
allowing spaces in existing labels. We'll work on something better
for 7.0....
Fixes https://gitlab.com/kicad/code/kicad/issues/6073
1) Make sure that layer dependencies don't prevent us from drawing
drill marks.
2) Don't draw pad shapes when their particular layer isn't enabled
(a side effect from the above)
3) Allow the printout painter to set a different hole colour (the
special case for through-hole pads was handled twice anyway -- once
in LoadColors() and once in draw( D_PAD ).
4) Replace the call to getDrillSize() which handles swapping in the
small mark size if set.
Fixes https://gitlab.com/kicad/code/kicad/issues/4847
The groundwork has now been laid for per sheet instance data. Initially
this only supports sheet page numbers but could be expanded to include
other per sheet instance information.
ADDED: Support for user defined schematic page numbers.
Setting a line thickness = 0 for graphic objects (circle, rect, line) is
allowed but creates issues for circles that were plotted a non filled shapes
but having a outline thickness = 0.
Two main changes: netclass values need to go through the DRC engine
so they can interact with other rules. They're also now dependent
on the layer being routed as well as the start object.
Also make the controls adjust to each other better. For instance,
copy-track-width needs to turn off when you select a particular
track width, and a particular track width needs to zero out when
you choose copy-track-width.
Fixes https://gitlab.com/kicad/code/kicad/issues/5951
This will always show 1 unit from each system, with the primary unit
being the current frame unit and the secondary unit being the
most recent unit used from the other system. These are saved in
the settings, so they are saved between runs.
* Make the ruler able to switch to mils after creation
* Cleanup an unused flag in Pcbnew dimensions
* Move unit changed notification into EDA_DRAW_FRAME so more
frames to use it.
* Allow switching units when GerbView ruler tool is active
Switch Eeschema to use the built-in printing routines
because its precisions are close to those and it is
cleaner.
Give mils a precision of 2 decimal places to match
the precision shown in inches.
This uncovered a memory corruption bug in MODULE's move operator,
several bugs in MODULE's move and copy constructors, and a bug in
BOARD's GetItem() call.
It also bumps the file format for saving/restoring groups inside
footprints.
Using CopyFile() that can collide with a windows header create hard to
understand errors, including link errors.
Renaming this function avoids these strange errors.
Previously, init order depended on the ordering of the
tool state map, which is opaque from the point of view of
registration. This makes it challenging to make one tool's
init depend on another. With this change, registration
order defines init order.
They're only on screen when they're being used, and we don't have
a GAL available to calculate their actual extents from (since their
text scales with zoom).
Fixes https://gitlab.com/kicad/code/kicad/issues/5845
in most of files, including wx.h is not necessary, when only 2 or 3 wx files must be included.
Moreover, on windows, including wx.h sometimes create compil warnings about
shadowed vars defined in some specific windows headers.
When invoking "Break Track" from the RMB context menu, Pcbnew
gets and uses the current position of the mouse to figure out where to
break the track. The problem is that the mouse has to be moved to select
the "Break Track" menu item, and the mouse position used is wrong. This
can result in the break in the wrong location or not happening at all.
CHANGED: This commit determines if the "Break Track" was invoked from a
context menu or a hotkey. If a hotkey, it uses the current mosue position.
If a context menu, it uses the original postion of the mouse when the menu
was opened.
plotter.h contains now only a header common to all plotters.
The code does not actually change, but it allows modifying a specific plotter
without recompiling most of kicad files.
Also simplifies groups so that other areas of code that have to know
about them at least don't have to know as much. One of the simplifications
is to not worry so much about empty groups until save time; others are in
the access logic to parent groups.
Also simplifies user model slightly by removing Merge and Flatten
(which are just ungroup/group and ungroup/ungroup/.../group).
Also allows multiple groups to have the same name. This is useful when
using groups for a classification system.
Fixes https://gitlab.com/kicad/code/kicad/issues/5788
CHANGED: GetDocumentExtents() in 'eda_draw_frame.h' now has a bool
parameter "aIncludeAllVisible" with a default value "true" which makes
it behave as it did before adding parameter. If "aIncludeAllVisible"
is false, the returned bbox ignores some items depending on which
program it is running in.
CHANGED: Made "Zoom to Objects" use only PCB edge in Pcbnew. This
allows text, notes, etc outside the PCB edge to be excluded in the
zoom calculation.
CHANGED: Added "Zoom to Objects" to Pcbnew main menu, and to RMB context
menus for Eeschema and Pcbnew.
Fixes https://gitlab.com/kicad/code/kicad/issues/5787
The infobar changes the size of the visible screen, so adding/removing
it will shift the screen center, causing the position of onscreen
objects to move up/down. This changes the sizing to pin the bottom
corner position when showing/hiding the infobar
Fixes https://gitlab.com/kicad/code/kicad/issues/5776
ADDED memberOf() function for DRC rule expressions.
Also fixes a bug in several of the pickers where the event wasn't
being correctly passed.
Fixes https://gitlab.com/kicad/code/kicad/issues/5647
This changes the file format. All previous copper layers that had a user
defined name are forced back to the canonical name and the user defined
name is stored as an optional quoted string in the layer definition and
only used for UI and plotting purposes. All copper object layer names
are now the canonical name for internal file use.
ADDED: Nine new user definable non-copper layers that can be optionally
added to the board layer stack.
CHANGED: All board layers can now be renamed by the user.
CHANGED: User defined layer names can now contain space characters.
Fixes https://gitlab.com/kicad/code/kicad/issues/1969
ViewGetLOD() returns the minimal value of a zoom to show an item.
However a zoom is a double, and using int as minimal value does not
allows setting a correct value in some cases.
These settings objects could be created in a constructor/destructor
so we should catch the exception since those are noexcept.
Also change the settings trace to match the other kicad traces
as KICAD_SETTINGS
Also improves the SNR and consistency of the menu item text. For
instance, a position is rarely useful, while relative sizes can be.
Also removes some unnecessary repitition, such as "Graphic Rectangle"
when "Rectangle" communicates the necessary information.
Also fixes a bunch of naming issues, primarily with lowercase for
protected variables, but also some for consistency with other parts
of the code.
Also changes the zone fill radio buttons in Board Setup to be more
generic referring to legacy vs. current, and to have tooltips.
Fixes https://gitlab.com/kicad/code/kicad/issues/5583
CHANGED: The margin used in 'Zoom to Fit' is now 2% instead of 10%.
ADDED: Added 'Zoom to Objects' to Eeschema which does not include
the page and border in the bbox calculations.
CHANGED: Removed pre-existing code that tweaked the center to account
for the scrollbars. It actually made the view off center. Removing it
results in perfectly centered zooms.
Fixes https://gitlab.com/kicad/code/kicad/issues/5145
This is a board file format change to account for the new properties.
Also, we now only store the critical information about the dimension's
geometry in the board, rather than storing every drawn line.
The DIMENSION object is now an abstract base, and ALIGNED_DIMENSION
is the implementation that exists today (we will add more dimension
types in the future)
You can now enable and disable snap to grid when drawing/editing across
all apps. You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
There was a regression in v6 where the zoom to selection toolbar
item wasn't canceling the tool when pressed and the tool was active
(it was in v5). This implements a more generic framework for canceling
tools on button presses.
Fixes https://gitlab.com/kicad/code/kicad/issues/5103
Also moves to WX_GRID to get rid of some wxGrid bugs, and moves the
provision of attrs to the GRID_TABLE (as those applied to the grid
are ignored when a table is specified).
Fixes https://gitlab.com/kicad/code/kicad/issues/5260
For instance, we get things like high-contrast-mode from the pad
dialog when rendering a pad preview, but we want the colours from the
parent PCB_BASE_FRAME.
windowClosing() calls Destroy() when the wxCloseEvent has no veto.
This is fine for usual EDA_BASE_FRAME frames, but not for frames shown in modal mode.
In modal mode, windowClosing() should not call Destroy(), because the calling frame
expects the instance not deleted after closing.
(the caller has to call Destroy() only once the frame can be actually deleted)
The center point on polygons now maintains the axis of the dragged line
and, optionally with Ctrl pressed, maintains the slope of the adjacent
segments as well.
This also fixes a longstanding issue that prevented the ctrl-snapping
from using the original point rather than the last updated point when
constraining.
Fixes https://gitlab.com/kicad/code/kicad/issues/2465
This commit adds support for display origin transforms to the PCB_BASE_FRAME
class. This instantiates a PCB_ORIGIN_TRANSFORMS object, and overrides the
GetOriginTransforms method in the EDA_DRAW_FRAME class to reference it.
The formatting of the status line has been updated to display coordinates
relative to the user-selected origin, and with the coordinates increasing
in the user-selected direction.
This commit adds the user configuration options to support display
origin transforms to the PCB_DISPLAY_OPTIONS class. This data is
configured by the "Origins & Axes" preferences panel added in a
later commit.
This commit modifies the UNIT_BINDER class to invoke the ORIGIN_TRANSFORMS
methods to support Display Origin Transforms.
The EDA_DRAW_FRAME class is modified to instantiate an ORIGIN_TRANSFORMS
object providing null transforms. A function is provided to allow the
UNIT_BINDER to find the ORIGIN_TRANSFORMS object in an overrideable manner.
This commit adds the ORIGIN_TRANSFORMS class to support Display Origin
Transforms in all KiCad applications.
Functions are provided to perform four basic types of origin coordinate
transforms:
* Transform a relative coordinate from internal to display form
* Transform a relative coordinate from display to internal form
* Transform an absolute coordinate from internal to display form
* Transform an absolute coordinate from display to internal form
These functions are supported for data types "int", "long long int",
and "double". The default implementations for all but "int" simply
return their input unchanged; the implementation for "int" invokes
the implementation for "long long int".
The expectation is that the different KiCad applications will create
derived classes from this base class and override the functions as
needed. Protected template functions are provided for the standard
translations to maintain consistency within the derived classes.
Display warning infobar in the board/schematic setup when no project
is loaded, since most of the settings in those dialogs are saved in
the project and not in the board/schematic file.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4868
Short net names are not unique; full names with paths must be used.
Added a grid cell renderer that does the escaping, to make it easier
to display net names in grid cells.
Once you unescape a net name, you can't go back to the escaped form
because you can't assume which `/` should be {slash} and which `/`
Because of this, we cannot use Unescape/Escape on the data model in
the netclass setup panel, and instead do the Unescape in the view.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5331
This time remove the push/pop from the picker tools as that's
responsible for the issue of trying to re-activate the move action
when its popped. Instead do the push/pop from the client code
of other actions that need it, and not at all from the move-with-
reference action.
Fixes https://gitlab.com/kicad/code/kicad/issues/5336
* Make the app progress indicator only have the indeterminate state
when the taskbar indicator is used (causes an uused variable warning
on wx<3.1)
* Remove unused dry run variable in pcb_netlist.h
* Remove unused forceDropAnnotations from the paste special dialog
since the dialog only controls keeping them.
wxScrolledCanvas is not properly exported, so when we
add a wxGrid it has a chance of creating linker errors.
Including the wx/grid.h ensures that the linker does not
see two conflicting symbols between gal and the other
place where wxGrid is used.
ADDED: Allow DXF/SVG graphics to be imported as a group
Also, cleanup the placement routine to allow the edit tool's flip
and rotate routines to be used when placing the items.
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.
There is still some debugging output in test code that really needs to
be moved into a unit test.
Add debugging output section to the coding policy regarding debugging
output.
Flags != language See http://www.flagsarenotlanguages.com We now use
local, untranslated language names for all languages.
Languages that have not been updated in >5 years and have less than 15%
of available strings translated have been removed from the menu options.
If a translator steps up to update the .po files, we can re-add them
This leaves the decision to check/enable menu items to the main UI
conditions, and only the menu has control over showing/hiding the menu
items. Also rip out a special case for the preferenes item that isn't
needed on OSX anymore since all the main menus have been moved to
ACTION_MENUs now.
* Frames moved: cvpcb, cvpcb footprints frame, gerbview, pagelayout editor
This also introduces new EDITOR_CONDITIONS that are used to set the
conditions of very common editor settings.
Also, some IDs were converted to tools in the pagelayout editor.
This allows for the tool framework to keep track of a universal
set of conditions for the UI state (enabled/checked/shown) for
controls of actions. It removes the need for the main menubar
menus to be CONDITIONAL_MENUs and be rebuilt on each open,
and instead makes the updates of the check and enabling of
items handled in the native wxWidgets way.
This commit switchs the 3d viewer and kicad project manager window
over to this system.
This introduces layer handling to a lot of the geometry routines.
Many of them don't do much with it now, but it does help multi-layer
zones and will help when padstacks are implemented.
The variables in the common settings struct are only updated on
save, so Python must use the ones from Pgm to get its values.
This does lead to the observation that Python's changes to the
variables do affect KiCad (they can break resolvers). So apparently
it can mess with us but we can't mess with it easily.
Also, improve the environment variable tracing infrastructure to capture
more changes.
The base GAL has the linewidth property already, and its
accessor will only return the base version. This was causing
problems with the Cairo printing GAL, since that setter wasn't
using the base class version. Also, this removes the print-specific
setter, since the actual setting of line width shouldn't be done
there and is instead done where the drawing happens.
Fixes https://gitlab.com/kicad/code/kicad/issues/5089
This ensures the colors used by the status text pane in the preview
widget are the same as the canvas, so there is a seemless transition
between the two.
Additionally, remove the scrollbars from the symbol preview widget
in the place symbol dialog - they are pointless.
Before this, the environment variables inside Python wouldn't reflect
the updates to them made after the interpreter was started in Pcbnew.
This will call into Python and set the variables when they are changed,
since Python can't synchronize itself when running in an embedded
interpreter.
Fixes https://gitlab.com/kicad/code/kicad/issues/5071
ADDED: Progress indicator in the taskbar
This adds a progress indicator to the Windows and macOS taskbar
icons to display the progress of some operations.
Note, this requires wxWidgets 3.1+
KiCad stores 3D cache files but never gets rid of any of them.
This patch adds a new function called 'CleanCacheDir()'. Any cache
files older than the passed 'number of days' parameter are deleted.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1928
Store list of previously open projects only in kicad.json
Keep all management of open projects in SETTINGS_MANAGER
Also add kicadSettings() for convenience
On platforms with limited framebuffer attachments, like GC7000L
driven by the open source etnaviv driver, we can still use
GPU acceleration by drawing directly to the main buffer.
EDA_DRAW_PANEL_GAL::onPaint checks if an overlay target is
available in the GAL, and if not, redraws the whole view if the
overlay target should be dirty.
Clearing of the overlay target is a no-op if there is no overlay
buffer.
Signed-off-by: Lukas F. Hartmann <lukas@mntre.com>
The fix convert all std::string storing a path to wxString (unicode support)
wxString were already used at many place to store paths, but not all.
For internal calculations mixing char strings and wide char strings is a recipe
for bug: any missing conversion between UTF8 and wxString breaks paths.
By default KiCad will now print each polygon point on its own line.
This adds to the vertical distance for large polygons but makes revision
control much cleaner as single point addition to a polygon does not
propagate to a diff over the full polygon.
Users/developers who want to save the files using the 4-points per line
have the ADVANCED_CONFIG setting 'CompactSave' which will provide the
original save method
This way, when the user changes their color theme, any sheets
that did not have a specific color set will change with the theme.
Also add a button to clear color overrides from a sheet, because
any schematics that have been saved before this change will have
the colors set to something other than UNSPECIFIED.
This API doesn't transfer ownership, so no smart pointers are required --
this just needlessly tightens requirements on the user of the interface.
(Fixes five instances of MSVC C26410 warning)
This is particularly important to keep the user from having to
enter overly verbose statements such as:
A.Type == 'via' && A.Via_Type == 'buried'
when:
A.Via_Type == 'buried'
is perfectly clear.
- convert expression string tokens to single-quote-delimited
- fix bug where netclass assignments weren't getting updated after
board setup dialog
- move property manager rebuild to lazy evaluation
- improve performance with wider use of const&
- retire DRC_SELECTOR stuff
- use wxString for GUI stuff (particularly translated stuff)
- fix EqualTo() to return false instead of asserting when op types
don't match
- fix buffer overruns with fixed-size string buffers
- make expression function calls case-insensitive
- integrate expression errors into rule parser
- produce more and better error messages
- keep BOARD_ITEM ptrs const as long as possible
- fix a couple of uninitialized variables
In 3.0, SetDoubleBuffered() is defined only under MSW and Linux. In
3.1, they change the routine to be a virtual function and so we need to
protect against redefining an existing function (Thanks Ian for pointing
this out!)
Str2Double assumes current locale. We usually switch the locale when
reading files but we should be using the function that explicitly gets
the C-locale conversion.
List of hidden nets stored in project local settings
Hide/Show actions in context menu only for now, will
add them to some more GUI places soon.
Ref https://gitlab.com/kicad/code/kicad/-/issues/1951
The previous hash was not unique for changes in integer/boolean values.
Generic hash_combine routines provide decent coverage for limited extra
cycles.
The old way of checking for focus loss caused GTK to be unable to
even open the combobox. This way checks for the event sent when the
list closes and uses that to close the grid editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/4617
LoadProjectSettings changed to take place after the board
has been loaded so that board-specific project settings can
be applied (such as net visibility and color overrides)
ADDED Eeschema-specific netclass settings including wire and bus
thickness, color, and line style.
Netclasses override individual wire & bus colors and line styles.
If that proves an issue we might look at something more sophisticated
with inheritance.
Fixes https://gitlab.com/kicad/code/kicad/issues/4581
aGridSize.x or aGridSize.y can be null if the config file has stored
0 as size.
This is illegal and crashed Kicad.
The min legal value is 1.0 in internal units
Adds a possibility to replace properties inherited from base types with
a more specific ones. For example, such properties may have:
- different meaning which should be reflected in property name
(e.g. TRACK::{G,S}etWidth() sets actual track width, but
VIA::{G,S}etWidth() modifies the diameter)
- different set of possible values (e.g. BOARD_CONNECTED_ITEM::SetLayer()
should accept any copper layer, but MODULE::SetLayer() works only with
F.Cu and B.Cu)
Introduces classes:
- INSPECTED: base class for types taking advantage of
generic properties system.
- PROPERTY*: meta-data storing information about properties
- PROPERTY_MANAGER: singleton class to get properties data
- New public static function OPENGL_GAL::CheckFeatures() gets called in EDA_DRAW_PANEL_GAL::SwitchBackend() before switching to OPENGL_GAL
- Moved all OpenGL feature checks from OPENGL_GAL constructor to OPENGL_GAL::init()
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4714
As long as the arc angle stays below <60°, it will automatically choose between
clockwise and counter clockwise. This allows the user to choose the direction
with a simple mouse movement.
Swap syncs can limit the redraw rate as the screen waits for previously
issued syncs. Setting this to -1 allows for adaptive swapping
(resorting to unsynced if it falls behind) if it is supported by the
card but will fall back to unsynced (0) if the adaptive is not
supported.
Fixes https://gitlab.com/kicad/code/kicad/issues/4226
- Fix file extension for new project
- Fixes for exceptions on MSW
- Fix some ASAN issues
- Allow SETTINGS_MANAGER to run headless
- Don't flag schematic as modified after schematic setup is closed
- Don't automatically unload projects when LoadProject is called
- Don't unload project if it's the same as the current one
- Make sure to properly init/de-init template field names
Per discussion on the developers list, this old system
no longer provides much value and is seen as annoying
by many users. The new save logic should prevent any
cases of file corruption on save, which was a major
reason for the backup file system existing.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2012
Various architecture upgrades to support this.
Creating a BOARD now requires a valid PROJECT, which caused
some (mostly transparent) changes to the Python API internals.
ADDED: Project local settings file
CHANGED: Board design settings are no longer stored in PCB file
CHANGED: Net classes are no longer stored in PCB file
CHANGED: Importing board settings now reads boards, not just projects
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2578
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4070
ADDED new rectangle graphics tool for PCBNew and Footprint Editor.
Also adds rectangle tool to both Footprint Editor and PCBNew Place
menus.
The Aux Origin tool can come back once we have multi-select toobar
buttons.
Also collapses an unnecessary level out of the auxOrigin and gridOrigin
settings.
Fixes https://gitlab.com/kicad/code/kicad/issues/2246
- Clear object attributes before and after plotting a zone.
It avoid using previously defined object attributes when plotting the next zone,
and using therefore incorrect attributes.
- Add aperture attribute to filled zone solid polygons (regions in Gerber)
Remove extraneous use of FLAG0 from tracks cleaner (it was checked but
never set).
Fix issue in expand connections where two parts of it couldn't agree
on the same flag (BUSY vs SKIP_STRUCT), and where the second part was
clearing the flag instead of setting it.
Remove obsolete HIGHLIGHT infrastructure (we now use selection).
Remove extraneous use of BUSY flag in several places (it was never
set).
Add missing plot and print changes for the new bus entry properties.
ADDED: Junction properties diameter and color can now be edited.
Fixes: https://gitlab.com/kicad/code/kicad/issues/4593
both Ucamco and Eurocircuits.
Update message in plot dialog about best solder mask clearance value.
Show warning in plot dialog if these values are no 0.
The scaling factor stored inside the canvas is created by a DPI_SCALING
helper, which will call the platform-specific functions if no user scaling
is specified. This change only affects OSX and Retina displays, so this
now also allows custom scaling to be used on OSX if desired (although it
shouldn't be needed, since wx has detection for it in 3.0.4).
You can now choose the behavior of dragging with the
middle and right mouse buttons.
You can also choose which modifier keys to use for
panning and zooming with the scroll wheel or trackpad.
You can also customize the zoom speed, which makes
it possible to have a good zoom experience on a wider
range of input devices.
You can also now zoom by dragging with the right or
middle button if desired.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/3885
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4348
Note: this is a basic implementation but it could be
improved once we include bus information in the netlist
and pcbnew can natively keep track of buses and nets
instead of just nets.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4158
CHANGED: Cvpcb fpviewer and the pcbnew fpviewer no longer have an options dialog
ADDED: Add a side toolbar to the pcbnew footprint viewer (and the measure tool)
This also cleans up some of the settings structs in the viewers, since
it was somewhat confusing before.
Fixes https://gitlab.com/kicad/code/kicad/issues/2205
* Consolidate the measure tool into one tool (this gives cvpcb
unit changing and snapping capabilities in its measure tool)
* Transition cvpcb to use actions for the sketch modes
* Replumb how magnetic items settings are stored and used
* Move it to a panel along with the canvas to have a better UI
* Allow the infobar to automatically close after a set time
CHANGED: The eeschema find notifications now use the infobar instead of
a popup window
This widget allows for non-intrusive display of text
above the editing canvas. Currently, this is used
for displaying the read only status of the files.
Set up a new lineage for SCH_ITEMS to get back to the SCHEMATIC
they live on: Items will all be parented to the SCH_SCREEN that
they are added to, and each SCH_SCREEN will point back to the
SCHEMATIC that it is part of. Note that this hierarchy is not
the same as the actual schematic hierarchy, which continues to
be managed through SCH_SHEETs and SCH_SHEET_PATHS.
The window decorations introduce an offset to our window size, since
they are not used when restoring the window size at startup they are
added by the window manager again.
Fixes https://gitlab.com/kicad/code/kicad/issues/4278
Migrate COLOR_SETTINGS 0->1 to remove fpedit section
Migrate FOOTPRINT_EDITOR_SETTINGS 0->1 to use new theme if created
Remove COLOR_CONTEXT that is no longer needed
There has been a long standing (since the beginning of the project?)
issue with sharing schematics between projects. It has been somewhat
supported for complex hierarchies (a sheet shared multiple times in a
single design) but it has not been well supported for simple hierarchies
(the symbol references cannot be changed in the shared schematic). This
issue has been resolved by moving all of the symbol instance sheet paths
from the symbol definitions in the all of the project files and save all
symbol path instances in the root sheet. This ensures that orphaned
symbol instance paths do not accumulate in shared schematic files and
that designs that reuse schematic in simple hierarchies can how have
different references. It also allows the root schematic from one project
to be uses as a sub-sheet in another project.
When legacy schematics are loaded, all sheet and symbol UUIDs are
converted from time stamps to true UUIDs. This is done to ensure there
are no sheet path instance clashes between projects. That being said,
there are no checks for this. It is assumed that the probability of
UUID clashes is so low that it doesn't make sense to test for them.
Texts were drawn with a minimal line thickness = GetDefaultPenWidth().
The default pen width can be to large for small texts.
So the actual text thickness is now always clamped.
* Push all sizing operations into EDA_BASE_FRAME
* Save the unmaximized window size when maximizing
so that we can then save it in the config if the
window is maximized. Otherwise the config ends up
with the maximized size saved, and weird behavior
occurs when unmaximizing on the next opening.
SCH_SHEET objects can only have another SCH_SHEET object as a parent
or nullptr for the root sheet so overload EDA_ITEM::SetParent() to
prevent the parent from being set to another type of object and add
some checks to the root sheet code just in case someone gets clever
and attempts to bypass the overloaded SetParent() call.
Now only reposition a window if it is completely on a
disconnected display or if only one corner is on screen
and it is within a region close to the screen border.
CHANGED: Window position on startup should be preserved more
Move the camera out to its own so that everything else is board-
related, and then rename BOARD_ADAPTER.
At some point the flags should probably be moved out too, and they
can have the EDA_3D_SETTINGS name.
Previously, the region was a usual polygon with arc approximated by segment.
Using a region with arcs is a better way because it allows CAM tools to
identify this region as a round-rect pad.
A side effect is a better shape and smaller files, however not really noticeable in fact.
Please note that the symbol cache is not embedded in the schematic file
to allow for round robin testing with the existing file format. Once
the parser round robin testing is complete, the symbol cache will be
embedded in the schematic file.
When the solder mask min size is > 0, pads are no longer flashed or regions items.
Good Gerber files need pads flashed or regions items.
Non 0 solder mask min size is reserved to special cases (home made PCBs for instance)
Let cmake generate the needed version strings, so we don't
have to spend program time doing it. This simplifies the
settings manager versioning.
Also, convert some file line endings to UNIX from Windows.
A more robust fix for https://gitlab.com/kicad/code/kicad/-/issues/4015.
When editing pcb items, the creation of a new net to connect existing
pads or traces can be a useful shortcut. This inserts the ability to
optionally create a new net from the Net Selector dropdown menu.
Replace SEVERITY_ERROR by RPT_SEVERITY_ERROR to avoid collision with a system definition.
Replace other SEVERITY_XXX by RPT_SEVERITY_XX for consistency.
Fix compil warnings and some other compil issues.
CHANGES: Symbol library file format has been converted to s-expressions.
Add support code for picking apart symbols at some future junction that
will allow full inheritance conversion of existing symbol libraries. For
now, symbols arranged by unit and body style numbers are nested for round
robin testing of symbol libraries once the parser is complete.
Keeping a pointer to the actual file history inside a special
file history menu led to many cases of use after free crashes,
so instead rework the actual file history to add the menu
items.
Fixes https://gitlab.com/kicad/code/kicad/issues/3741
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme
Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
When adding a .pretty library, if the actual .pretty folder were
selected then no folder would be added to the list of libraries.
This led to an assert when normalizing paths, and the library
not being added.
Previously we call only setlocale( xx, "C" ), but it was not enough on Windows.
Now we call wxLocale("C")
wxLocale calls setlocale, but also make some others initialization in wxWidgets.
It fixes some issues related to comma versus point as fp separator.
Especially wxWidgets warnings are no longer thrown, and a one case of incorrect
conversion is fixed.
The combination of left over test code in lib_id.h/cpp and the changes
to handle the DEBUG compiler flag correctly on all platforms exposed a
swig issue on debug builds. Removing the offending test from lib_id.h
resolved the issue.
ADDED: Back annotation algorithm,
eeschema back annotation dialog
CHANGED: added some minor helper methods to SCH_REFERENCE_LIST and SCH_REFERENCE,
split SCH_REFERENCE_LIST::CheckAnnotation on 2 parts to reuse code
Remove the CACHE_WRAPPER whose sole purpose was to allow the
cache to be stored in the project, and instead just have the cache
inherit the proper class.
This also removes vector cover types which do nothing except obfuscate
the underlying implementation.
Mainly changes SCH_SHEET_PINS and CONFIG_PARAM_ARRAY (which will soon
be replaced by Jon's new stuff).
It served us (mostly) well for more than a decade. It helped KiCad grow
before the std:: came into decent shape or speed. It was a good little
list.
RIP DLIST 2008-2020
This moves EESchema DLIST structures to rtree. These changes are more
fundamental than the pcbnew changes from 9163ac543888c01d11d1877d7c1
and 961b22d60 as eeschema operations were more dependent on passing
drawing list references around with SCH_ITEM* objects.
The old methods were very clunky and not recommended (and didn't
properly cast the function types). This changes to useing the
recommended way of declaring events and casting the event handlers.
For legacy reasons, it stored left and right "spin" as flipped integers in the file format.
But the code handled the flip in multiple locations rather than just doing it on file io.
This change unifies the internal code and does the mapping in the file I/O.
ADD: Allow drawing of current and phase traces with dotted style
for easier differentiation from voltage and magnitude. The option
is available in the View menu of the simulator.
* Split up the thirdparty code into the thirdparty folder (#3637)
* Create a new kimath static library containing all the math functions
This is part of cleaning the build system for #1906.
Property is a pad info used mainly for fabrication or test.
Currently, supported properties are:
BGA property (variant of SMD pad)
Fiducial (global to the board or local to the footprint)
Test Point
Heat sink
Castellated.
And are used in Gerber files (copper layers and drill files)
Increment BOARD_FILE_VERSION to 20200104
The 3d viewer is the last component to not use the action framework, so
we descope the common defines to its canvas. Once the 3d viewer is
converted, we can remove these entirely.
Change default text size and anchor positions back to mils. Internal
units need to be converted at the source, otherwise the size will get
converted twice in the schematic editor configuration code which will
result in the default text size being off by the conversion factor.
Fixes#3730https://gitlab.com/kicad/code/kicad/issues/3730#
Remove GERBER_FILE_IMAGE_LIST dependency to EDA_ITEM, useless.
GERBER_FILE_IMAGE: replace DLIST by std::deque to store gerber draw items.
Remove dead code
Abandon the previous behavior of always creating a new copy of the
buffered symbol which required a re-parenting of every derived symbol
to prevent accidentally orphaning a derived symbol parent symbol
pointers.
This change required something that should have been done a long time
ago by adding an assignment operator to LIB_PART. The assignment
operator makes it possible to create a single copy of the symbol to
buffer which gets updated rather than deleting the last copy and
replacing it with a new copy.
Add a clear method to the MULTIVECTOR class so that existing LIB_PART
object draw items can be removed before assigning the draw items from
the part being assigned.
Fixes#3672https://gitlab.com/kicad/code/kicad/issues/3672
Create an IsContentModified() function in each frame
that provides if the content has been modified, and
use that instead of always copying the checks.
This is the first step to allowing non-segments in the line chain.
External routines cannot be allowed to change the line chain without
going through the internal routines. To accomplish this, we remove the
Vertex() and Point() access routines and only leave the const versions.
Transformations are given for both points as well as the chain itself.
This was re-introduced by 5d3e6e3d44
The crash happened b/c we have to manage list containers in each element
and minor adjustments cause the rest of the list to be lost. This
commit re-implements it using std::iterators and deque
Fixes#2623 | https://gitlab.com/kicad/code/kicad/issues/2623
Replace some C casts with C++ dynamic_cast.
Fix iterator bug when deleting inherited symbols from legacy file format
symbol library cache.
Remove unnecessary const when return wxString object instead of reference.
This change completely removes the LIB_ALIAS design pattern an replaces
it by allowing LIB_PART objects to inherit from other LIB_PART objects.
The initial implementation only allows for single inheritance and only
supports the mandatory fields in the derived part because that is all
that the current symbol library file format will support. Once the new
file format is implemented and saving to the old file format is deprecated,
more complex inheritance will be added. The LIB_ALIAS information saved
in the document files was move into the LIB_PART object. This change
impacts virtually every part of the schematic and symbol library editor
code so this commit message is woefully incomplete.
REMOVE: Removed the symbol aliases concept from the schematic and symbol
editors and the symbol viewer.
NEW: Replace the symbol alias concept with simple inheritance that allows
a library symbol to be derived from another library symbol.
This update replaces the existing uses of unique pointer creation with
the C++14 std::make_unique call that provides proper memory release in
event of an exception.
-Add a "wrap" option->Search results implemented as a nested list.
-Allow to go back with a "Find previous" button
-Remove the marker search option
-Fix a DLIST issue
-Add a result counter ("eg: hit(s): 1/3")
-Search history limited to 10
-Fix the search history order
-User can include or exclude references/values/texts from results
Fixes: lp:1845460
* https://bugs.launchpad.net/kicad/+bug/1845460
This means that utility programs no longer have to be manually
added to the COMBINED_UTILITY, they self-register their
information at static init time. This is basically the same concept
as the Boost test registration.
All utilities need to do now is register their UTILITY_PROGRAM info
struct with the UTILITY_REGISTRY::Register method. No headers required.
* Make the grid display settings separate from the board object
* Ensure that the grid is initialized on creation in all the frames
Fixes: lp:1843169
* https://bugs.launchpad.net/kicad/+bug/1843169
Mainly because it creates a new keyword a new keyword in *.kicad_pcb files,
and needs some tests, this is currently a advanced feature.
Enable it by adding "UsePinFunction=1" in "kicad_advanced" config file.
Note also "UsePinFunction=1" only enable saving this info in *.kicad_pcb
and kicad_mod files.
The pin name defined in Eeschema is now available as pad info.
Useful for the board designer (the pin function is displayed in the message panel).
Needed for the Gerber P&P files.
Ensure we iterate over all the sub directories and files inside of them
when deleting a directory from the project tree.
Fixes: lp:1852357
* https://bugs.launchpad.net/kicad/+bug/1852357
Handle symbols as well as strings in the "source" lists of
netlist files.
Handle Protex gerber file extensions.
Check for project_name-whatever pattern for files that we
don't recognize (such as project_name-NPTH-drl_map.ps)
Previously, the build version would only update if the dialog_about.cpp
file were modified. This moves the date generation into the same file
as the build version, so it will be updated whenever a new version
is made.
Mainly replacing std::string by wxString to manage filenames.
On Windows, a sdt::string cannot manage a filename, unless using
in many places TO_UTF8 and FROM_UTF8.
So the best way is to use a wxString for filenames and error messages.
The pointer passing for display options is deprecated. This removes the
excess casting as the EDA_FRAME didn't need the base call with no value.
All requests for display options are now returned const and are updated
with a Set() routine after modification.
In Gerbview, this resolves an issue where the display options were not
stored because it was receiving the NULL from EDA_FRAME.
Note that since the markup might exist for other reasons, it has
to be turned on with a preference setting. (It goes through a set
of bitflags so the same architecture can be used for other markup
structures that we might want to support in the future.)
Note also that this is more about engineering nomenclature than
visual formatting. In that respect it's more similar to overbar
than italic or bold.
We have forbidden lists maintained in 3 separate locations. This causes
a bit of confusion as to which is correct.
This makes the list uniform but remains to place the character set in a
single location.
deque structures have higher overhead than vectors. Not usually
problematic, but with hundreds of thousands of characters each with only
a few strokes, the overhead becomes dominant.
Therefore, for some footprints, the right footprint was not associated to the component.
The hash calculation was using a XOR to combine 2 sub hash values.
This is not a strong way to combine these hash values.
They are now added. Looks better to identify similar and different footprints.
Fixes: lp:1847575
https://bugs.launchpad.net/kicad/+bug/1847575
This function calls Pgm(), but when running from a script (not from kicad) Pgm() uses a nullptr reference.
The nullptr reference is now tested in ComputeBoundingBox()
* Fix wildcard display in the file selector dialog (on GTK
it would show the regex to the user)
* Move the file extension comparison into a common function
* Make the events generated by the selection of context menu items
have the position where the menu was opened
* Ensure that TC_COMMAND type events have their position set to
be the cursor position where the event originated
Standard apertures are circle, rect, oblong and polygon (regular polygonal shapes with 3 to 12 vertices)
The support of the standard aperture type polygon was missing in Gerber plotter.
The help file bridget_tee_formula.md can be displayed in pcb_calculator.
For Help messages, a markdown text (with some basic html tags) is often enough
and is more easy to translate than full html texts.
Copying the const pointer on large structures (filled zones) will be
very slow and memory intensive. This can cause OOM on linux and extreme
slowdowns when the save is triggered.
Fixes: lp:1840168
* https://bugs.launchpad.net/kicad/+bug/1840168
The OnKillFocus handler of the UNIT_BINDER replaces the text in the
control with the evaluated string, which removes the selection. To
get the original text on the primary selection clipboard, we must
add it ourselves.
Fixes: lp:1794623
* https://bugs.launchpad.net/kicad/+bug/1794623
Use the HTML_MESSAGE_BOX window to present the warning messages rather
than wxMessageBox which would overflow the display when there were a lot
of graphic items that could not be parsed.
Fixes lp:1839565
https://bugs.launchpad.net/kicad/+bug/1839565
This makes the pcbnew multiline text editor natively accept tabs in the
same manner as eeschema and extracts key handling routines to the shim
to allow undo/redo.
Also allows Ctrl-Y under Linux in addition to other platforms. While
not as popular as Ctrl-Shift-Z, it is utilized for Redo in some contexts
The wxAssert compile path on msw includes inline assembly which is
illegal for constexpr routines. This replaces the wxAssert with
wxLogDebug as suggested by Ian
The INT_MAX limit for most elements makes sense only for single-segment,
straight line elements. For elements that accumulate lengths, we should
utilize the long long int (64 bits) to allow for greater lengths.
Fixes: lp:1842367
* https://bugs.launchpad.net/kicad/+bug/1842367
We use DIALOG_SHIM to display many items that should behave more like
frames with the ability to min/max/resize. This changes the default
custom dialog behavior to the frame-type.
Fixes: lp:1829950
* https://bugs.launchpad.net/kicad/+bug/1829950
The base initialization of EDA_RECT sets a 0/0/0/0 rectangle that
prevents merging properly with valid EDA_RECT. This sets the default to
be uninitialized until the internal data are set.
This allows rapid debugging of the coroutine memory issues. It moves
the default stack size to 256 * 4096 = 2^20, which will utilize full
pages on all architectures.
* Push a function into CONDITIONAL_MENU that adds the item
* Modify the tooltip for close and exit items to have the
program name
Fixes: lp:1835454
* https://bugs.launchpad.net/kicad/+bug/1835454
Our coroutine system can make debugging memory issues harder by not
following a standard stack allocation system. We can get around this by
using valgrind's built-in stack instrumentation. Each coroutine
registers a stack allocation allowing memcheck to recognize when
accesses are bounded.
Also rewrites the PCBNew Find dialog to make use of the above, including:
1) searching in user-defined footprint fields
2) searching in pcb text
3) a history list in the search popup
4) case sensitive searching
5) word sensitive searching
6) the ability to turn wildcard searching on/off
7) better placement of the result when the dialog obscures part of the
window
Fixes: lp:1838006
* https://bugs.launchpad.net/kicad/+bug/1838006
Pads not on copper layers now do not have a netname, and are no longer taken in account in connectivity.
Especially it avoid creating useless rats-nests for these pads.
Previously, for instance after modifying preferences or language,
they were rebuilt but the tools state was not set due to a missing call to SyncToolbars() after rebuilding.
These are used in too many places throughout pcbnew to change all
polygons. If we need different rounding, we'll want to implement them
on a per-call basis.
1) Intermediate states might be self-intersecting, and we shouldn't
be policing our users on what order to do things in
2) The polygon might already be self-intersecting, at which point we're
preventing the user from fixing it.
Also includes better const management for SHAPE_POLY_SET API.
Fixes: lp:1833831
* https://bugs.launchpad.net/kicad/+bug/1833831