d7616fdca8
Fix a few compil or coverity warnings.
2021-06-01 09:04:37 +02:00
ed66c0f14d
Fix typo and clean up leftover tracks
2021-05-31 22:42:56 -04:00
1a102f03c0
Clean up co-linear tracks after finishing routing
...
This involved adding some extra infrastructure to be able
to handle the case where a track that is sitting in the
router's commit waiting to be added to the board actually
needs to be deleted instead.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8419
2021-05-31 17:36:38 -04:00
6381ffd10a
Fix diff pair coupling test when gap constraint is in a different rule
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8519
2021-05-31 10:13:05 -04:00
c4cabb38d5
More worksheet -> drawing sheet cleanup.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8516
2021-05-31 12:26:44 +01:00
0598c82972
Terminology (use present tense for flags).
2021-05-31 12:26:44 +01:00
1b94534451
Revert "Use lambdas to fix paste conditions"
...
This reverts commit 65c7c77c3d
2021-05-30 21:25:42 -04:00
5c543b62c5
Cleanup: Use make_unique for the legacy plugin board deleter
2021-05-30 20:56:44 -04:00
65c7c77c3d
Use lambdas to fix paste conditions
...
`SELECTION_CONDITIONS::Idle && ` was evaluating as always true because this was referencing the function pointer
2021-05-30 20:37:16 -04:00
a7d1ef9927
Fix some more uninitialized warnings
...
From PVS Studio
2021-05-30 20:05:37 -04:00
382dca4e6f
Fix uninitialized member warnings
...
Based on PVS Studio report
2021-05-30 20:01:01 -04:00
67f0bbc6d7
router: fixed crash in HullIntersection() when the path has 0 or 1 points.
...
fixes: 8515
2021-05-31 00:20:32 +02:00
614787caae
router: clear head line geometry if current head routing failed + small improvement to follow-mouse optimization.
...
Also added a lot of verbosity for the pns-log-viewer tool.
Fixes: 8511
2021-05-31 00:18:42 +02:00
dfd80e077c
router: fix another corner case in LINE::Walkaround() (duplicated vertex triggered by feeding a closed loop as the input path)
...
fixes: 1775
2021-05-31 00:17:12 +02:00
0da85ded2f
PNS: Fix diff pair handling of microvias as start items
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8514
2021-05-30 15:51:28 -04:00
b7f32d7f53
Clean up some layout of pages in Board Setup
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8474
2021-05-30 14:04:00 -04:00
fcb89b99a3
router: walkaround algo should not copy the previous via position when the current iteration via placement fails.
...
fixes: 7827
2021-05-30 00:35:58 +02:00
af2e163890
router: annotate source locations of WALKAROUND debug items
2021-05-30 00:35:54 +02:00
8e2fb1bdb9
Treat Cut like a Delete while in a Move.
...
Also fixes problem where second action wasn't getting executed because
the event was getting eaten.
Fixes https://gitlab.com/kicad/code/kicad/issues/8072
2021-05-29 22:10:43 +01:00
3eb5a484e1
PNS: Don't clip tuning paths to pads on other layers
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8504
2021-05-29 15:52:44 -04:00
f6d6b7d263
Harmonize property names for zone/footprint/pad clearance and thermals
...
Use "override" instead of "local" for better clarity.
2021-05-29 14:12:23 -04:00
28f17c3ae6
PNS: Prevent wrong clearance being cached for new diff pairs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8377
2021-05-29 13:31:17 -04:00
85ca85652d
Do not add debug items to view if debug flag isn't enabled
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8510
2021-05-29 12:40:24 -04:00
bd59da3642
PNS: Local min distance has a minimum points requirement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8510
2021-05-29 12:40:24 -04:00
eff9746f34
CHANGED: Net highlight in PcbNew is now persistent to match Eeschema
...
CHANGED: Highlight net tool changed to highlight display toggle; moved to left toolbar
CHANGED: Multi-net highlight is now accessible when using the highlight net action
ADDED: Highlight Net and Clear Highlight actions to Net Tools context menu
ADDED: Default hotkey (Ctrl+`) for toggling net highlighting
The current and previous net highlight state are now stored and can be toggled
on or off with an action (no hotkey by default).
Highlight is now treated as a persistent state rather than a tool that is entered,
meaning there is no longer a special tool to enter in order to highlight nets.
Highlighting can be controlled while any other tool is active using the hotkeys
or context menu on a net object.
Tweak the icons for highlight net and layer display mode to better disambiguate them.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8250
2021-05-29 12:40:24 -04:00
81c7fb61f8
Sub-menu "Preferences..." in main menu "Preferences": fix not working accelerator key.
...
Accelerator keys are disable in our WX_MENUBAR. A common ACTION_MENU is used and
"Preferences..." is now shown in Hotkeys list.
2021-05-29 18:09:49 +02:00
ebd957b08e
router: rework router's debugging infrastructure to be more compatibile with the 'qa/pns/pns-log-viewer' tool.
...
The log viewer tool lets you inspect all the intermediate stages of the routing algorithms. This patch:
- Adds source location tracking of the debug calls (need to use the PNS_DBG macro, sorry)
- Moves some wxLogTrace calls to DEBUG_DECORATOR::Message() so that messages can be displayed alongside the corresponding geometric shapes
2021-05-29 00:13:24 +02:00
132eb53a40
router: clean some debug clutter
2021-05-29 00:13:24 +02:00
b3caa3c4d4
router: fix ordering of colliding hulls in NODE::NearestObstacle()
...
Replaced the generic SHAPE_LINE_CHAIN::Intersect() with PNS::HullIntersection() which correctly rejects
'non-penetrating' intersections.
2021-05-29 00:13:24 +02:00
e66bbfd1ec
router: improve the feel of the walkaround algorithm
...
Makes walkaround more 'huggy' - the trace being routed sticks to obstacles
instead of jumping around in uncontrollable way.
2021-05-29 00:13:24 +02:00
8148b5d81f
router: improvements in LINE::Walkaround()
...
- Fix walk failure if the input path starts on the hull boundary
(happens very often during tight walkaround)
- Input line can have a loop at the end now. Such condition happens when the routing
destination point lies inside the hull of a colliding primitive.
2021-05-29 00:13:24 +02:00
d2ec3fc4ed
router: P&S-specific hull/line interection function that correctly rejects segments/vertices that only touch the hull polygons without penetrating them
2021-05-29 00:13:24 +02:00
8c4361bbc6
router: adapt to new SHAPE_LINE_CHAIN::INTERSECTIONS structure
2021-05-29 00:13:24 +02:00
752ae4d519
Rename modification flag routines
...
Differentiates better between the EDA_ITEM IsModified(), referring to
items themselves changing and the EDA_SCREEN IsContentModified(),
referring to whether we have made any unsaved changes.
2021-05-28 12:07:04 -07:00
b1dcf74042
Use standard "Untitled" name for files without names
...
Also translates to provide useful information regardless of language
2021-05-28 11:51:54 -07:00
d7f219e98f
Unify IsSave and IsModify
...
The flags and calls were used identically, leading to potential
confusion/bugs. Testing for modification should go through
IsContentModified()
2021-05-28 11:51:54 -07:00
64cd401bdb
Delete Tool: Fix missing "Item Locked" popup
...
Fixes problem identified in https://gitlab.com/kicad/code/kicad/-/issues/8392
Removes same popup from schematic tool because SCH_ITEM can not be locked
2021-05-27 05:38:51 +00:00
4fb643df93
Update POINT_EDITOR when locking/unlocking via Hotkey/RMB.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8489
2021-05-26 16:03:35 +01:00
ba73456d49
Allow point editor to persist
...
After drawing a graphic, allow the control points to persist when
exiting the tool.
The effect of this is to make the first "Esc" press a
"return-to-select-tool" event without modifying the selection or control
points from within the drawing tools. The section "Esc" press, when in
the selection tool will clear the selection and the control points
2021-05-25 16:47:54 -07:00
5c9a73aa5e
Correct position for grid even when we're not snapping to a point.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8125
2021-05-25 21:57:19 +01:00
0eed73ea73
Make PCB_POINT_EDITOR honour locked flag.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8254
2021-05-25 18:13:24 +01:00
5f22025611
Don't drop text on Edge.Cuts when plotting.
...
While -our- user model is that Edge.Cuts is just for edges, it's best
not to dictate a particular model to users.
ADDED a DRC error when text (or a dimension) appears on the Edge.Cuts
layer.
Fixes https://gitlab.com/kicad/code/kicad/issues/8470
2021-05-24 19:54:52 +01:00
8f3343b9e3
Clear UUID paths of unmatched footprints even when not deleting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8461
2021-05-23 22:50:11 +01:00
ab8428bd68
Naming conventions.
2021-05-23 22:21:34 +01:00
9554aaee7f
Can't use wxDD_MULTIPLE before 3.1.4.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8465
2021-05-22 22:19:37 +01:00
ee00d8386f
Make sure dir case can handle multiple selection too.
...
Files case already can.
Fixes https://gitlab.com/kicad/code/kicad/issues/8465
2021-05-22 20:39:26 +01:00
baf868fce7
Add footprint repair tool (currently just for duplicate IDs).
2021-05-21 17:52:11 +01:00
0d8a9a1091
Make sure that a tool never exits with autopan or capture.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8459
2021-05-21 14:53:58 +01:00
3de60231db
Allow clearance debugging of exact items in DRC violation.
...
ADDED: Run clearance resolution tool... RMB menu item to DRC
clearance errors.
Fixes https://gitlab.com/kicad/code/kicad/issues/8438
2021-05-21 00:00:24 +01:00
e93e9fa3e5
Add rudimentary type checking to rule eval with reporter.
...
Also cleaned up existing error reporting to not expend CPU cycles
when there was no reporter.
Fixes https://gitlab.com/kicad/code/kicad/issues/8438
2021-05-20 23:06:24 +01:00
4c3d78dec0
Break out separate holes-co-located violation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8456
2021-05-20 10:36:56 +01:00
60dbda9dd2
Pcbnew: try to fix an issue about frame title.
...
for Pcbnew, this issue (see bug 8404) is only seen on OSX.
So I am blindly trying to add to Pcbnew a fix made for Eeschema.
2021-05-19 17:28:15 +02:00
be3a08bfa7
Pcbnew printing: fix missing zones on non copper layers.
2021-05-19 10:05:49 +02:00
ed2f2257ce
Remove footprint locking in the footprint editor.
...
(It doesn't make any sense there as the position is always {0, 0} in
the editor.)
For discussion see:
https://kicad.zulipchat.com/#narrow/stream/258851-Developer-Chat/topic/Is.20there.20a.20reason.20why.20kicad.20now.20seems.20to.20lock.20pads.3F
2021-05-18 23:14:17 +01:00
810a717e4e
Remove unused NETINFO_MAPPING member
...
The legacy plugin no longer implements saving, so no net code renumbering
is needed.
2021-05-17 11:54:06 +00:00
c33b2cfa8d
PANEL_SETUP_MASK_AND_PASTE_BASE: fix another cosmetic issue.
...
On KDE, a text was truncated, although there is room to display it
2021-05-16 13:22:48 +02:00
4c69a74505
Force layers visible when routing on them.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8432
2021-05-16 11:18:31 +01:00
2354222188
Remove tool tips not related to the objects they are depending on.
...
Probably due to a too zealous copy/paste.
2021-05-16 10:03:12 +02:00
057e2cd6b7
Pcbnew: fix some cosmetic issues in a few dialogs
...
Depending of Window managers, some texts were truncated.
Also avoid to write a sentence with the beginning in one widget,
and the end in another widget: it makes the sentence not translatable
2021-05-16 09:13:13 +02:00
138a4b21c1
Smarten custom-pad-shape test for collapsing solder mask margins.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8413
2021-05-16 00:41:19 +01:00
d1061b9683
3D viewer: Fix broken handling of text thickness, thus creating erroneous item positions
...
Especially, texts having a not centered justification were shown with artifacts.
2021-05-15 13:18:06 +02:00
ccaf9e11df
Load footprint info when there's no cache available.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8371
2021-05-14 22:24:21 +01:00
1642f0d784
Move microwave tools from toolbar to Place menu
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8233
2021-05-12 02:34:52 +00:00
75f49ba1b6
Add length tuner settings to toolbar context menu
2021-05-12 02:34:52 +00:00
34145d8170
Add length tuning menu to vertical pcb toolbar
2021-05-12 02:34:52 +00:00
c49af57c2a
Don't require a restart to get the current m_Live3DRefresh setting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8349
2021-05-11 15:07:52 +01:00
bc6b9b527a
Allow stackup height to be excluded from length calculations
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8384
2021-05-10 22:11:58 -04:00
5157c6c3b9
Use half copper thickness as the thickness of the start and end of vias
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8384
2021-05-10 21:48:50 -04:00
64c76d8067
Hide unimplemented controls in length tuner settings
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8383
2021-05-10 21:40:52 -04:00
1201ab5cac
Clarify track segment length vs net length in message panel
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8396
2021-05-10 21:06:17 -04:00
ce01a28aad
Don't double-remove nets when netcodes are reused
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8206
2021-05-10 19:52:19 -04:00
7356f9568d
Move grid disable modifier from ALT to CTRL.
...
Also had to move the H/V/45 disable modifier from CTRL to SHIFT.
Fixes https://gitlab.com/kicad/code/kicad/issues/8124
2021-05-09 20:17:40 +01:00
916a15793f
Fix some OSX compiler warnings
2021-05-09 12:59:57 +01:00
a5ff27cae7
Pcbnew, EDIT_TOOL::GetAndPlace(): fix and issue, and allows execution only if
...
called inside the board editor.
Fix also a broken behavior: the current action was not cancelled, and if it is
called during a move items (when typing the 'T' key), items were broken.
The actual bug is the fact it is called also in fp editor and footprint wizard frame,
because it is part of EDIT_TOOL action list, common to fp editor, and should not.
But a full change is much more costly than just a filter.
2021-05-09 11:51:57 +02:00
b4b59c3b33
Fix uninitialized variable.
2021-05-08 20:49:51 +01:00
1a45d9474b
Don't show commands that cancel routing when routing is in progress
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8363
2021-05-08 14:55:02 -04:00
6e017b475d
Warn user before removing invalid rows from library table entries.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8080
2021-05-08 08:58:54 -04:00
aaffd0c137
Pcbnew: fix crash due to a not tested null pointer.
...
Fixes #8369
https://gitlab.com/kicad/code/kicad/issues/8369
2021-05-07 10:35:00 +02:00
e709e77870
Add missing locked setting to zone dialogs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8255
2021-05-06 22:50:03 +01:00
cda70a66c3
Spelling fix vrml->VRML
...
Closes https://gitlab.com/kicad/code/kicad/-/merge_requests/739
2021-05-06 21:55:36 +01:00
1b9a8564af
Pcbnew: fix incorrect PCB_TEXT::TextHitTest( const EDA_RECT& aRect,... ).
...
It was not taking in account the text rotation in block selection.
Fixes #8366
https://gitlab.com/kicad/code/kicad/issues/8366
2021-05-06 18:48:23 +02:00
2e3860de6f
Naming conventions.
2021-05-05 22:58:40 +01:00
56058314be
Fix minor Coverity warnings and minor compil warnings.
...
(uninitialized or shadowed vars)
2021-05-05 08:58:55 +02:00
094dd2e08c
pcbnew : rotate relatively to selection center
2021-05-04 09:13:20 +00:00
16bb45208a
Fix save accelerator key handling when library tree has focus.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8247
2021-05-03 19:41:07 -04:00
c7345096f8
Use wxFFileInputStream explicitly when loading xml documents
...
wxFFile (FILE, buffered) is better than wxFile (syscalls)
2021-05-03 19:39:56 -04:00
939b5e1932
PCB_EXPR_EVALUATOR: don't use string comparison to check for undefined enum values
2021-05-03 23:45:54 +02:00
d7e44b5181
Default delete-tracks-inside-pads to false.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8326
2021-05-03 19:48:24 +01:00
f2677340f2
Access the new paste behaviour via a new Paste Special... dialog
...
ADDED Paste Special... action in pcbnew
CHANGED Additional options for Paste Special... in eeschema, including
"Assign unique reference designators to pasted instance"
2021-05-03 19:38:32 +01:00
98c8f43320
eeschema and pcbnew paste: consistent paste behaviour
...
Duplicates are reannotated on paste in the same way in pcbnew and
eeschema such that when copying and pasting the same block in the
pcb and schematic, the reference designators will match.
2021-05-03 19:38:32 +01:00
ae009e0758
Ensure clipboard data is available after KiCad closes
...
Always Flush() after SetData()
2021-05-03 19:38:31 +01:00
688ee18989
Don't apply margin to "interior" shapes in a shape-set.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8345
2021-05-03 12:12:03 +01:00
a6ad7a4a70
Python wizards: Fix a compatibility with "old" pythons scripts, after commit 21fde9b6.
...
Temporary fix until a full python API exists.
2021-05-02 16:06:11 +02:00
c4801a4dd4
Catch oom for graphics importer
...
Because DXFs and SVGs could be nasty sized
2021-05-01 14:26:47 -04:00
d4bb1cbc63
Make drawing sheet loading slightly smarter
2021-05-01 14:11:31 -04:00
f6f2284851
Fix missing includes on Linux after commit 0427bda7
2021-05-01 20:05:01 +02:00
0427bda768
Remove useless wx/wx.h include, that create sometimes compil warnings on msys.
...
wx/wx.h includes all wxWidgets .h files, and sometimes creates collision
names in #define between kicad and windows headers
Moreover, blindly including a lot of useless files is compil time consuming
2021-05-01 19:32:15 +02:00
18ff8ea4a0
Try to catch memory allocation errors in pcbnew and eeschema
2021-05-01 13:11:10 -04:00
3a9a85b373
Enum class PAD_PROP_T
...
Renamed such that it does not affect python
2021-05-01 10:58:30 -04:00
03cf2b517f
Enum class PAD_ATTR_T
...
Renamed such that python stays the same
2021-05-01 10:51:54 -04:00
e20562b09b
Some cleanup
2021-05-01 10:37:20 -04:00
b243c2280d
enum class PAD_SHAPE_T
2021-05-01 08:22:35 -04:00
21fde9b629
enum class PCB_SHAPE_TYPE_T
2021-04-30 22:36:12 -04:00
7df9fa0631
Diffpair gap should only override clearance within a coupled diffpair.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7975
2021-04-30 18:39:21 +01:00
6e874265fa
Autosize all of the layer columns to ensure dpi match
...
Fix #8202
2021-04-29 20:01:07 -04:00
c149ed8905
Allow diffpair gap to override normal netclass clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7975
2021-04-29 10:23:49 +01:00
91421f9908
Separate logic for multi-select and click-select when filtering.
...
Also removes a bunch of old implementations of pad locking and
filtering which are no longer needed. (They're now handled by the
uniform locking code.)
Also removes some of the auto-promotion logic. Rotating a footprint
when a pad was selected is going to be surprising whether the pad
is locked or not.
Fixes https://gitlab.com/kicad/code/kicad/issues/8322
2021-04-29 00:07:35 +01:00
39a0bc6252
Remove erroneous block check in dxf import added during previous improvements
2021-04-28 18:48:59 -04:00
4d9829ec8b
Fix some issues related to python scripts:
...
- make PadArray.py compatible python2/3
- fix a wxWidgets warning in pcbnew_scripting_helpers.cpp shown in some cases
2021-04-28 14:02:47 +02:00
78b555afa2
Filter Select All event against hierarchy
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8316
2021-04-27 16:58:45 -07:00
a433451bd8
router: 'root line' tracking in the SHOVE algorithm. See comments for detailed explanation.
2021-04-27 14:13:16 +02:00
3a8744d054
router: introduce concept of a root lines in the OPTIMIZER.
...
By 'root lines' we mean the oldest traceable ancestor of each track moved by the router
(i.e. after shoving for a while, the root of each shoved line is it's latest non-shoved version).
With this we can teach the OPTIMIZER more tricks, such as the LIMIT_CORNER_COUNT constraint. It ensures
the results of the optimization will not be less cornery than the original line, reducing the feeling
of the optimizer being too intrusive.
2021-04-27 14:13:16 +02:00
76f8861e6e
router: revert Seth's arc adjustment in StartDragging().
...
Fixes picking the last segment instead of the last vertex to drag (when one is requested).
I didn't notice any behaviour change of the dragger wrs to arcs.
2021-04-27 14:13:16 +02:00
524ca442f3
Old python scripts: fix issues due to code change, and make them Python3/3 compatible
2021-04-27 11:55:56 +02:00
b63c482347
Fix a link issue with pcbnew_wrap.cxx (MSYS + Windows 64 bits specific)
...
For some reason the .cxx file generated by SWIG cannot be linked if compiled
with debug options.
It creates a *lot* of not found symbols. So compile it with release mode (MSYS only)
2021-04-27 07:40:34 +02:00
5bf37a9b24
Don't allow selection crossing a parent/child relationship.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8292
Fixes https://gitlab.com/kicad/code/kicad/issues/7255
2021-04-26 18:47:44 +01:00
b65b1f8e9c
Revert NPTH commit, and add some comments.
2021-04-26 17:33:49 +01:00
7afc3f7df9
Rearrange track width button to be more obvious
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8300
2021-04-25 19:58:11 -04:00
cbe8b1644a
Fix segfault after using group properties dialog
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8302
2021-04-25 22:15:19 +02:00
d2b6050792
Minor dialog spacing adjustment.
2021-04-25 19:26:05 +01:00
e6bf922a77
Make sure connectivity is locked for zone filling.
...
See 1e33928b96
2021-04-25 18:09:53 +01:00
e3eacafbcb
Run hole clearance tests on NPTH pads, but not copper clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8295
2021-04-25 17:55:43 +01:00
b7279c0bab
Don't allow rounding errors to flag DRC violations in hole2hole.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8295
2021-04-25 17:55:43 +01:00
517bcb15b1
Formatting.
2021-04-25 17:55:43 +01:00
953f579d59
Keep dialog fields in sync with dummyPad values.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8294
2021-04-25 14:19:38 +01:00
93d42e9902
Pcbnew: Fix crash when importing a netlist created by a 5.1 Eeschema version.
...
Fixes #8293
https://gitlab.com/kicad/code/kicad/issues/8293
2021-04-25 15:13:55 +02:00
eb85836234
Make sure we have footprint courtyards before depending on DRC rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8291
2021-04-25 12:45:06 +01:00
1e8b23402c
Bump board format version for locked syntax fix.
2021-04-24 19:11:17 +01:00
e27733587d
Fix 2 minor Coverity warnings.
2021-04-23 19:57:36 +02:00
3be17ceb50
PANEL_SETUP_TRACKS_AND_VIAS: fix UI issues.
...
Fixes #8264
https://gitlab.com/kicad/code/kicad/issues/8264
2021-04-23 10:58:59 +02:00
7569fc8aad
Bring back live move of footprint in 3D view if live refresh is on
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8220
2021-04-22 22:32:41 -04:00
263e026ac4
Initialize grid visibility in appearance panel constructor
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8266
2021-04-22 22:10:55 -04:00
075bd788eb
Remove unused OBSTACLE_VISITOR::m_extraClearance
2021-04-23 01:53:09 +00:00
3e96fb851c
Give diff pair toolbutton a menu also
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8233
2021-04-22 21:37:15 -04:00
ecd9bf696e
Be consistent about using nullptr instead of 0
...
0 can be too easily overloaded into an int, so ensure we use nullptr
when we mean pointers.
2021-04-22 22:20:34 +01:00
54e18f6b1f
Pcbnew: remove update schematic option for geographical annotation dialog.
...
REMOVED: Update schematic option from geographical annotation dialog due
to potential issues with incomplete and/or broken updates. Use "Update
Schematic from PCB" tool to update reference designation changes.
Forcing the footprint reference designator changes back to the schematic
without checking any other board changes in the schematic could leave the
schematic in a undefined state. The update schematic from board tool is
the correct method to sync any changes from the board.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8042
2021-04-22 12:45:59 -04:00
cf47d665ea
PNS: Dragged line needs to retain width
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8246
2021-04-22 09:04:41 -04:00
9b1890606d
PNS: Do not allow resolved optimal values to go below board minimums
2021-04-21 22:43:26 -04:00
ae113ea299
DRC: inDiffPair should return false if the coupled net is missing
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8268
2021-04-21 22:41:17 -04:00
e7d3bf29aa
Don't save project for legacy board without explicit action
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7368
2021-04-21 21:27:23 -04:00
e5d029af6b
Margin layer missing from some edge clearance tests.
...
Fixes bug reported on KiCad Forums.
2021-04-21 21:58:47 +01:00
61ce1b35ec
R/W dimension lock flags and update format for all lock flags.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8255
2021-04-21 19:59:27 +01:00
3b049b32cf
Show if pads, zones, and dimensions are locked in the status bar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8255
2021-04-21 19:58:18 +01:00
25e2f35308
Remove no-longer-needed macOS wxPython things.
2021-04-21 12:50:31 +00:00
a06f0ca908
Clean up macOS Python3 paths
2021-04-21 12:50:31 +00:00
7357424efc
Update macOS to Python 3, wx 3.1, and Phoenix.
...
This is a work-in-progress. It could use testing while I continue to fix
the remaining pieces.
There are some changes that will be needed for signing and notarization.
This currently relies on a Python tool I wrote (dyldstyle) to fixup
KiCad.app correctly. I would like any bundle fixing necessary to use a
built KiCad on macOS to live inside KiCad, rather than in
kicad-mac-builder or elsewhere. While I was experimenting, I found this
worked, however, and I would love to get extra hands testing.
I added a CMake argument, MACOS_EXTRA_BUNDLE_FIX_DIRS, for devs and
packagers who have extra directories they need to add to
fixup_bundle on KiCad.app.
There's an issue about differing behavior when KiCad is opened via
the command line or via Finder/launchd.
2021-04-21 12:50:31 +00:00
c973a447df
Make sure board netinfo list is updated when net inspector renames a net
2021-04-20 21:15:42 -04:00
cbd7d698a9
Fix diff pair error message suffix suggestions
...
We accept diff pairs that end in N/P, no underscore required
2021-04-20 21:08:34 -04:00
8792d7288d
Net inspector: Fix calculation of via length
...
We have a function for this in the BOARD_STACKUP now, and it returns
a more correct number (excluding the start and end copper layers)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8256
2021-04-20 20:03:38 -04:00
2535daf661
PNS: Account for via stack height in diff pair length tuner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8256
2021-04-20 19:31:10 -04:00
a7f956581c
Pcbnew: fix board file formatting issues.
...
This does not required a board file version change. All of the changes
are white space formatting fixes and improvements.
2021-04-20 10:18:31 -04:00
ce3a84f579
Consolidate wx aui dock art color setting
2021-04-19 21:12:02 -04:00
ba3f0d5d07
Fix a wxWidget assert and a minor wxWidgets alert
2021-04-19 15:01:00 +02:00
287b0eea0f
TRACK::GetMsgPanelInfo(): For arc, display shape ("TRACK (arc)") and radius.
...
Also display "TRACK (arc)" in DRC error message, instead of just "Track".
2021-04-19 10:00:46 +02:00
dd828bd964
PNS: Bring back original Highlight Collisions behavior
...
From discussion with Tom, Jeff, and Wayne, it appears as though
we all agreed that Highlight Collisions should behave like it
did in 5.1, which is to say, always just highlight collisions,
never prevent them. The Allow DRC Violations checkbox just
controls whether or not you can fix/commit the head line if it
has violations; you are not prevented from moving the head
line to violating positions in any case.
Right now, there does not seem to be much demand for a separate
"Stop at First Obstacle" mode since Walkaround basically does that
but better, but we agreed that if there is demand for it in the
future, it should be implemented as a new router mode rather than
a behavior of Highlight Collisions mode controlled by the Allow
DRC Violations checkbox.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7828
2021-04-18 21:01:07 -04:00
4538d78828
router: fix via shoving regression.
2021-04-19 00:43:30 +02:00
57de83897a
router: VIA SetDrill() and SetPosition() must update the hole shape too.
2021-04-19 00:43:15 +02:00
dc3a73a2fb
PAD::MergePrimitivesAsPolygon(): add option to approximate circles outside the actual shape
...
When creating a polygon from an arc/circle, the small error due to approximation
can be now inside (when drawing/plotting the shape) or outside the circle
(when building a clearance area) like other pad shapes
Fixes #5313
https://gitlab.com/kicad/code/kicad/issues/5313
2021-04-18 20:10:00 +02:00
ec6995697d
PNS: even more free performance
...
If this doesn't work, we have bigger problems
2021-04-18 09:50:06 -04:00
2d9bac804c
Pcbnew: minor fix: remove extra spaces when outputting pad primitives section.
...
No format change.
2021-04-18 15:25:14 +02:00
6425ad4118
PNS: Fix propagateDpHeadForces obstacle calculation
...
Using a synthetic via here doesn't quite let us use VIA::PushoutForce
because it will use the wrong clearance, and also doesn't quite have
the logic we want. I am not familiar enough with PushoutForce to know
if its logic is a bug in other cases, so instead I just brought in the
parts of its algorithm that are needed here.
Additionally, we prevent pushing more than once from a given obstacle,
which causes walkaround to be more successful when routing diff pairs
against a large collider such as a keepout area.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8232
2021-04-17 22:37:30 -04:00
5974446523
PNS: Let's make the r-tree work for us
...
I'm not sure where the magic number of "4x worst" came from, but it's
been around forever. This is extremely inefficient as it negates much
of the power of r-tree filtering in dense designs. If we really trusted
it, we could set this just to worstClearance. Keeping it above the worst
clearance by a little bit seems to provide enough of a speed improvement
to resolve the test cases I have, so I'll go with that for now.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7777
2021-04-17 21:37:11 -04:00
a577b6386d
Fix missing status bar update after undo/redo.
...
(Reported by Franck.)
2021-04-17 17:21:54 +01:00
13473420e5
Remove duplicated routine and fix bug in UTIL version.
2021-04-17 15:10:59 +01:00
2ae264751f
Rename class_board_stackup.{h|cpp} to board_stackup.{h|cpp}.
2021-04-16 17:07:06 -04:00
3a6a919097
Improve clarity in the Print dialog around edge cuts layer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8200
2021-04-16 16:53:51 +01:00
29c45743b7
Fix calculation of arc lengths; include them in net inspector
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8140
2021-04-15 21:06:35 -04:00
64c8befa01
Fix copy/paste error
2021-04-15 20:45:32 -04:00
928d336bee
Only try to copy design rules file if it exists
2021-04-15 20:43:35 -04:00
23a1f8b17a
Enforce board minimum clearance over local clearance overrides.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8199
2021-04-15 21:44:04 +01:00
311bb9c36e
Save rules file when saving project.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8143
2021-04-15 10:23:38 +01:00
9a282f081a
Document rules version clause.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8201
2021-04-15 10:23:38 +01:00
4920692bcd
DIFF_PAIR_GAP_CONSTRAINT does not need to be restricted to two items
...
We just need one item to see what netclass we're in; the constraint
itself is specific to diff pairs so the condition doesn't need to be.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8205
2021-04-14 23:43:43 -04:00
1d7e5a0443
Fix merge error that prevented a previous change from working
2021-04-14 23:30:16 -04:00
433e148e08
Move some string formatting functions out of base_units
...
Keeping them in base_units means that we can't introduce
any dependence on these functions to anything that needs to
compile without one of the unit defines (EESCHEMA, PCBNEW, etc)
2021-04-14 23:21:10 -04:00
268d570941
PNS: keep last valid diff pair trace as current state
...
This allows fixing/committing what is on screen even if the current
cursor position doesn't have a valid solution (the old behavior
would result in the current trace disappearing)
2021-04-14 23:21:10 -04:00
c829dba88e
PNS: Reduce minimum distance to start turn in diff pair placer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8193
2021-04-14 23:21:10 -04:00
cac4d70154
PNS: Respect fix-all in diff pair placer
2021-04-14 23:21:10 -04:00
fe6cc0c3d8
Spokes are from center of pad, not from hole (ie: pad position).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8195
2021-04-14 11:34:26 +01:00
f7cc6d1e1e
Fix save as and save copy as for project files.
2021-04-13 17:56:50 +01:00
d79057b83a
Fix merge wreckage in building netclasses.
2021-04-13 17:56:50 +01:00
94e8855c13
Generate changed message before making change.
...
Otherwise we've lost the "before" value.
Fixes https://gitlab.com/kicad/code/kicad/issues/8186
2021-04-13 13:43:30 +01:00
55d2d0d93e
Fix some bugs in file save as.
...
The order of operations *appeared* to be a bit out of joint.
We need to create a new project in project mode as well as in standalone.
Fixes https://gitlab.com/kicad/code/kicad/issues/8143
2021-04-13 13:34:40 +01:00
296a9df530
PNS: Pick up diff pair starting width from continuation track
2021-04-12 23:10:15 -04:00
1d9ca181a2
PNS: Use existing seg direction if both DP segs are parallel
2021-04-12 22:34:13 -04:00
37dd4038eb
Display options can change during the picker lifecycle
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7133
2021-04-12 22:12:48 -04:00
36ef198610
Clean up nets from items when deleting in the inspector
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8162
2021-04-12 21:17:42 -04:00
311cde0984
Safety check suggested by Coverity
2021-04-12 20:42:50 -04:00
2aa5e568e8
Refactoring
2021-04-12 20:40:05 -04:00
73fb85a352
PNS: Calculate diff pair primitive orientation using anchors only
...
The previous method fails if the primitive is an expanding or
contracting pair (diagonals going inward or outward) resulting in
incorrect orientation, which then leads to incorrect candidate
gateways being generated and no solution found.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8185
2021-04-12 20:34:44 -04:00
94fad2944d
ConvertOutlineToPolygon: Don't crash if we didn't find a segment owner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8184
2021-04-12 19:59:55 -04:00
715c61ac9f
PNS: Fix yet more arc edge cases
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8150
2021-04-12 19:59:55 -04:00
edb2136a0d
CADSTAR PCB: KiCad's minimum permitted Through Drill is 0.0508mm(2mils)
2021-04-12 20:25:05 +01:00
a3196a11a7
CADSTAR PCB: Be more specific with "allow thermal pads" DRC hack
...
Only tag the footprint as such when we know it has overlaping copper
over the pads with different pad numbers
2021-04-12 20:25:05 +01:00
b5edd5f6a5
CADSTAR PCB: Fix loading of thermal pads
...
- Create a pad if a component copper is associated with any other pads
in the footprint.
- Rename/renumber 'PCB Only' pads that are associated with a component
copper and make them all use the same pad name/number.
2021-04-12 20:25:05 +01:00
2eb96279a2
Fix FOOTPRINT copy constructor so it maintains ordering of containers
2021-04-12 20:25:04 +01:00
a4c08e2af6
Apply Eeschema cursor updating architecture to PCBNew.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8135
2021-04-12 11:11:11 +01:00
2cba64b258
Fix missing env var expansion in pos file generation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8178
2021-04-12 10:17:42 +01:00
34ea6891b0
Formatting.
2021-04-12 10:17:42 +01:00
675ec70f0f
PANEL_SETUP_BOARD_STACKUP: fix a wxassert due to a "C" locale test in a format function.
...
A call to FormatInternalUnits() was made without switching to "C" locale.
In this case it was not necessary, but FormatInternalUnits() expects in some tests
this locale, thus creating issues (assert and incorrect conversion)
Fixes #8177
https://gitlab.com/kicad/code/kicad/issues/8177
2021-04-12 09:57:40 +02:00
49a91414d7
PNS: Apply co-linear seg merging to drag operations
2021-04-11 22:32:11 -04:00
1c431d9929
PNS: Fix some off-by-one errors with arc dragging
2021-04-11 22:12:53 -04:00
a26fc6d65d
PNS: Fix several issues with arc dragging
...
Do not merge vertices that belong to different arcs
Fix start segment identification after arcs
Fix free-angle drag after arc
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8173
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8150
2021-04-11 17:56:40 -04:00
7d58c53e42
Apply new hole-dimming logic to via pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8144
2021-04-11 17:51:38 +01:00
2cde76a191
Don't do any hole clearance testing within a single footprint.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8141
2021-04-11 16:03:16 +01:00
7ba110bd77
PNS: Fix dragging of segments with arcs in line
2021-04-11 10:18:57 -04:00
a30894e5a1
Allow SHAPE_LINE_CHAIN and SHAPE_ARC to be mirrored using a SEG
2021-04-11 13:27:25 +00:00
fe8fbf1d5d
Use arcs instead of line approximation for Miter shape
...
TODO:
* The resulting line chain is broken with the arcs, and
this appears to be some subsequent issue I was not able to pin down.
* The requirement of a correction factor is not clear to me
2021-04-11 13:27:25 +00:00
cc956695ae
Hit test for worksheet before adding Properties to menu.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8171
2021-04-11 14:18:35 +01:00
6072f5831b
Apply uniform spacing to orientation controls.
2021-04-11 10:33:26 +01:00
29e5882637
Fix typo (found by Coverity).
2021-04-11 10:32:15 +01:00
675444a646
Dim hole walls that don't pass through high-contrast layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8144
2021-04-10 22:41:38 +01:00
5c448057c8
PNS: Prevent state flicker when starting drag
2021-04-10 16:31:39 -04:00
7784d7cb12
PNS: Fix visible area restriction
...
VIEW::GetBoundary() returns the entire view area, not the visible area.
Surprisingly, we had no API for this, so I added one.
Also, changed the dragger behavior to toggle between optimizing just the
modified area and optimizing the visible area, i.e. we will now never
optimize off-screen portions of the dragged track.
2021-04-10 16:13:08 -04:00
94afdcb92a
PNS: Allow control of area-restricted drag optimization
...
CHANGED: The interactive router settings now include a switch to
enable or disable optimization of the entire dragged track,
which is now disabled by default. When enabled, the router
will reroute the entire track (from the dragged segment to
the closest pad/via in each direction) to be more optimal.
When disabled, only the area around the dragged segment
will be modified.
CHANGED: The "optimizer effort" slider is removed from the interactive
router settings dialog, as this setting did not have any
meaningful impact in most cases and was a source of confusion.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5918
2021-04-10 15:17:39 -04:00
846e4aed42
Fix selection filter in Edit Text and Graphics dialog
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7966
Fixes https://gitlab.com/kicad/code/kicad/issues/8149
2021-04-10 15:49:23 +00:00
dc0cf3b802
Clean up a confusing API.
...
AllowDRCViolations is kept in any mode as a *setting*, but only
controls router behaviour when the mode is mark obstacles.
Fixes https://gitlab.com/kicad/code/kicad/issues/7795
2021-04-10 11:08:02 +01:00
176fcd43d8
Cleanup.
2021-04-10 10:04:02 +01:00
252fad1cc7
These grids *must* have a border on OSX to render correctly.
2021-04-10 10:04:02 +01:00
f606069bf6
Formatting.
2021-04-10 10:04:02 +01:00
43d8145304
Pcbnew: Snap to the closest point on graphic polygon border
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8164
2021-04-09 22:33:55 +00:00
58dfb6539f
Change orientation and flip sign of dimension height when rotating orthogonal dimensions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6940
2021-04-09 22:30:18 +00:00
d2c7df155b
Don't show blind/microvia holes on layers they don't appear on.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8144
2021-04-09 17:14:53 +01:00
3450610977
Add ability to allow thermal vias to be implemented as pads.
...
This is mostly just for CADSTAR. Since we don't (yet) have general
purpose footprint attributes, this reuses the "net tie" hack.
Fixes https://gitlab.com/kicad/code/kicad/issues/8141
2021-04-09 14:02:13 +01:00
619a353c5e
Decouple 3D view dirty marking and refresh
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8154
2021-04-08 22:09:19 -04:00
7b3c7e1ef3
Fix some free/delete issues
...
Removes the C-format memory management
2021-04-08 16:58:45 -07:00
9939af3e27
Fix color handling in the stackup manager panel
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5671
2021-04-09 00:56:31 +01:00
401bc53038
Move the DRC constraints page into a scrolled window
...
We seem to be getting a lot of these now, and it was
being cutoff by default - so make it a scrolled window
like the severities.
2021-04-09 00:56:31 +01:00
5490a85f97
Don't recompute the board thickness on UI update
...
The thickness only needs to be computed when the actual
values change, so computing on UI update is a waste of
resources and can cause UI lag.
Fixes https://gitlab.com/kicad/code/kicad/issues/5049
2021-04-09 00:56:31 +01:00
d64de3808f
Pcbnew: Snap to group items
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7694
2021-04-08 23:22:19 +00:00
a8b40bf683
Avoid Clipper when possible.
...
When expanding an error to the outside of a rounded corner pad we
need to trim it to the pad bounding box or else we get little ears
where the circle approximation meets the pad square. This is expensive,
and for clearance lines we don't really care whether the error is
inside or outside.
Fixes https://gitlab.com/kicad/code/kicad/issues/8157
2021-04-08 22:37:14 +01:00
5ea68c7694
Copy some bug fixes from DRC dialog across to Footprint Checker.
2021-04-08 22:37:14 +01:00
4521091cc1
Do not invalidate geometry when all we need is a repaint
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8157
2021-04-08 17:35:51 -04:00
d878cbddbc
PNS: a few forgotten cleanup items
2021-04-07 23:34:45 -04:00
c9040a5c53
PNS: fix some weirdness identified by PVS
2021-04-07 23:16:56 -04:00
e0f26fd525
Make live 3D refresh optional
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8068
2021-04-07 22:39:30 -04:00
d4957b112e
PNS: Keep last valid drag solution in the node
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5450
2021-04-07 21:59:23 -04:00
26835f582c
Some situations require more than one dummy
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7820
2021-04-07 21:30:18 -04:00
9432484394
PNS: Find origin segment correctly when arcs are present
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8139
2021-04-07 20:28:30 -04:00
18f07024a6
Simplify UI event handling in pcbnew global edit dialogs
...
Instead of enabling/disabling the controls on every possible
UI event in these dialogs, only do it when the actual control
wants to know if it should change status.
2021-04-07 17:39:48 +01:00
1a727558b0
Switch update event handlers to use the event instead of pointers
...
It is safer to use the event to pass the enable/string
instead of pointers, since using the pointers could trigger
other UI events.
2021-04-07 17:39:48 +01:00
29cc16a4c4
Push pcbnew layer alpha change update into base frame
...
This code was shared between the footprint frame and
pcb edit frame, so push it into the base edit frame.
Also remove the dummy wxUpdateUIEvents that weren't
actually being used.
2021-04-07 17:39:48 +01:00
3fd3be9843
Layer fixes for PCBNew drawing tools.
...
1) Implement layer changes for dimension drawing tool
2) Ensure drawing layer is visible for (1) and for the text drawing
tool.
Fixes https://gitlab.com/kicad/code/kicad/issues/8106
2021-04-07 15:02:48 +01:00
e50b450092
Formatting and organisation.
2021-04-07 14:50:29 +01:00
85efdb85b0
CADSTAR PCB: Ensure continuous track routes
...
When route offsetting, add an additional thin track to ensure
end point of one track and start point of the next are at the same
location.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8131
2021-04-07 11:28:02 +00:00
211fd65c23
Move: Ignore mouse up and click events until a mouse move / drag event
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8123
2021-04-06 17:29:52 +00:00
09b2db3139
Test for group in footprint was snagging all footprint children.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8121
2021-04-06 18:27:43 +01:00
9f957d3e08
Fix crash when attempting to tune discontinuous lines
...
Also correctly find the tuning path through arcs
https://gitlab.com/kicad/code/kicad/-/issues/8131
2021-04-06 09:07:11 -04:00
235688e459
Less restrictive Arc Track Dragging tool
...
Use the connecting straight tracks even if not exactly parallel - allow
an error margin configurable in ADVANCED_CFG (default 1 degree). Also
be less strict about end point matching and use the width of the track
as the criteria to determine suitability.
Finally, delete any short lengths of track at the end of the operation
and amend the arc end points to keep connectivity.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7967
2021-04-06 12:52:01 +00:00
0a2c8575ce
ZONE properties: stage commit even if !Settings().m_AutoRefillZones
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8028
2021-04-06 12:52:01 +00:00
69fd0b38ff
Remove a couple of unused OnUpdateUI handlers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5049
2021-04-06 13:47:15 +01:00
daaf738c7f
Add save-as files to file history.
...
Also fixes where lock wasn't getting reset on a Save As.
Fixes https://gitlab.com/kicad/code/kicad/issues/8111
2021-04-06 13:35:26 +01:00
b2f788adc1
PNS: Fix UseConnectedTrackWidth when starting from ARCs
2021-04-06 01:27:13 +00:00
e46c9d35ac
Add undo/redo handling to length tuner event loop
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8129
2021-04-05 19:58:14 -04:00
24cd174a23
Don't dereference a possibly-invalid optional
2021-04-05 19:34:57 -04:00
ec45855aed
Make sure drawing layer is visible.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8106
2021-04-06 00:06:23 +01:00
9a764126ce
CADSTAR PCB: Keep all tracks as a single chain where possible
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8119
2021-04-05 20:15:09 +01:00
a6c3d74a73
Pass active layer to StartRouting in length tuner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7857
2021-04-04 21:51:54 -04:00
a24bc34b66
Better colors for length tuning popup in dark mode
2021-04-04 20:33:59 -04:00
c7ecb51f77
Update PNS length tuning algorithm to match the new BOARD algorithm
...
Now tracks inside pads are optimized to give a more accurate length.
Also, the start/end of the assembled line is used to identify the right
pad joints for pad-to-die length calculation.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4204
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1765
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6877
2021-04-04 20:27:22 -04:00
41c54d383e
Fix some edge cases with length calculation
2021-04-04 19:38:54 -04:00
cdfb014ab6
CHANGED: Account for via height in track length calculations
2021-04-04 13:59:18 -04:00
80728f8d78
Improve algorithm for calculating net length; use it for netinfo message panel
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4258
2021-04-04 12:27:09 -04:00
6b24abac8f
PNS: Don't snap to end items if snapping is disabled by modifier key
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8033
2021-04-04 10:22:23 -04:00
52ca7ed27c
Naming conventions.
2021-04-04 10:43:56 +01:00
c1df77f59b
Terminology.
2021-04-04 10:32:24 +01:00
98e6a089ab
Treat board edges same as graphics for locked/unlocked.
...
It would appear that not using the locked/unlocked graphics filters
is confusing too (see deleted comments in code).
Fixes https://gitlab.com/kicad/code/kicad/issues/8114
2021-04-04 10:27:26 +01:00
2c3ee0d85f
Don't forget CommitPendingChanges.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8083
2021-04-04 01:02:31 +01:00
83ae28f04f
Fix selection when pasting/duplicating items
...
The item flags weren't getting reset after placing
the new items, so the next operation on them was
having weird behavior.
Fixes https://gitlab.com/kicad/code/kicad/issues/7528
2021-04-03 19:09:21 +01:00
cb17c9f3dd
Typo fix: Correct various misspelled words
...
agressive -> aggressive
decription -> description
miscellanous-> miscellaneous
rectange -> rectangle
Unkown -> Unknown
2021-04-03 13:39:50 +00:00
8dff3725ac
Typo fix: Correct 'allow to' -> 'allows one to'
2021-04-03 13:39:50 +00:00
52aea0a2c9
Consistent terminology.
2021-04-03 11:15:11 +01:00
c5536b2cab
Title case in menus.
2021-04-03 11:15:11 +01:00
aa09d6448a
Pcbnew: Allow Create Array on groups
...
Also removes possible null pointer dereferencing.
Fixes https://gitlab.com/kicad/code/kicad/issues/7515
2021-04-03 09:06:49 +00:00
a8896ebd73
Don't show leading ratline for unconnected net
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8040
2021-04-02 20:29:25 -04:00
d7a95e2af4
Rotate FP_TEST properly when flipping
...
The angle was `-angle` instead of `180 deg - angle` when flipping top to
bottom.
Fixing that, in turn, created some problems with justification, which
was modified both by `FP_TEXT::Flip()` and `FP_TEXT::KeepUpright()`.
What's worse, `FP_TEXT` has another mechanism for keeping the text
upright: `FP_TEXT::GetDrawRotation()` returns different angles if the
"keep upright" flag is set. But there is no analogous behavior for
justification, so the text would sometimes get shifted, and sometimes
not, depending on which mechanism was engaged. And both are used,
apparently.
Clearly, such an arrangement an open invitation to bugs and
inconsistencies. One of these mechanisms should be removed. I haven't
done this yet, and would prefer to postpone this until V6 is out.
I've fixed the justification problems, but this was by trial-and-error,
and I don't feel I really understand the behavior responsible. But I
think it's a good sign that most of my changes are line removals, not
additions. Flipping is a simple operation, it's just mirroring and layer
change. If something simple has a complicated routine, then it's
probably full of hacks.
Fixes https://gitlab.com/kicad/code/kicad/issues/7289
2021-04-02 21:13:21 +00:00
0a660c2364
Pcbnew: Remove 180 deg rotation when flipping PCB_TEXT in some cases
2021-04-02 21:13:21 +00:00
99fd872fce
Pcbnew: Do not move footprint fields twice in align/distribution tools
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8094
2021-04-02 21:09:36 +00:00
7655533412
Do not move footprint fields twice when performing Move Exactly
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8062
2021-04-02 21:07:59 +00:00
1931677316
Ensure the layer dropdowns are correctly sized
...
On GTK, the layer dropdown was sized based on an empty list,
so for non-default fonts it would be undersized and cutoff
the font.
2021-04-02 21:33:31 +01:00
1db5e2bc96
Don't force an entire refresh of toolbars to update sizes
...
Forcing an entire refresh of the toolbars is wasteful,
so instead just update the sizers directly.
2021-04-02 19:12:21 +01:00
d3bf20e80b
Pcbnew, place free via: take netcode from the pad, if the via is inside a pad.
...
Fixes #8089
https://gitlab.com/kicad/code/kicad/issues/8089
2021-04-02 17:19:44 +02:00
f88d39b4f0
Fix state issue in router's switch layer handling.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7590
2021-04-01 18:10:04 +01:00
f6f31b7654
Get rid of save warning after Footprint Editor Save As.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8084
2021-04-01 11:17:24 +01:00
94470bfa15
Minor cleanup.
2021-04-01 11:10:01 +01:00
0c4184f1a4
Split lib tree initialization into a two-pass affair.
...
This is under the supposition that we can't set the column widths
on some Mac instances because the host controls haven't yet been
created. This is primarily conjecture based on looking at things
that have the *possibility* of going wrong. Why this only happens
in some installs is beyond me.
Fixes https://gitlab.com/kicad/code/kicad/issues/5479
2021-04-01 10:51:29 +01:00
90abc8ba8b
Excellon drill files: slightly change comments inside files
2021-04-01 07:38:00 +02:00
b6f2941a06
Another try a allowing touching courtyards.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8076
2021-03-31 22:54:30 +01:00
a530c22eff
Shorten "Allow free pads" tooltip and rename button "Skip Locked Items"
2021-03-31 18:28:18 +00:00
7077e59395
Make moving pads independent of footprint much harder with new setting
...
It is still possible to move a pad independent of footprint through
the pad properties dialog. This is a much more conscious decision
than using the move tools.
ADDED: "Allow free pads" preference setting in pcbnew, default to off.
When enabled, allows moving unlocked pads independent of the footprint
(i.e. previous behaviour). When disabled (default), any attempt to move
a pad will move the parent footprint instead.
REMOVED: "Lock pads of newly added footprints" preference setting in
pcbnew. (Pad lock state is now loaded from the footprint definition)
CHANGED: There are now only two possible lock states for a footprint:
locked and unlocked. The lock state of the pads in the footprint is
now independent of the footprint lock state.
Also fixed a latent bug that would allow a pad to be moved when the
parent footprint was locked (see m_selectionTool->RequestSelection
lambdas in edit_tool.cpp)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7739
2021-03-31 18:28:18 +00:00
737262ffa8
Allow touching courtyards.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8076
2021-03-31 10:44:59 +01:00
0a0935e0f3
Remove ACTIONS::TranslateLegacyId and TOOL_DISPATCHER::DispatchWxCommand
...
After commit 9535153f9e
2021-03-30 23:20:22 +00:00
8cb6f15687
Warn when diff pair router can't start due to too-small-gap.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7795
2021-03-30 19:49:23 +01:00
b151dd02b9
CADSTAR PCB: Fix incorrect solder mask/paste clearance
...
Need to divide by two as this is a clearance, not diameter.
2021-03-30 13:03:56 +00:00
ad2043eda6
CADSTAR PCB: DrillXoffset and DrillYoffset are zero when not specified
...
Fixes an issue that resulted in pads being loaded 100nm off from the
original CADSTAR position.
2021-03-30 13:03:56 +00:00
6eb2e2a6e3
Fp editor: do not change item UUIDs when loading a footprint from library.
...
Fixes #8066
https://gitlab.com/kicad/code/kicad/issues/8066
2021-03-30 12:58:22 +02:00
78a60e9dfb
PNS: Put polygon error outside pad shapes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7672
2021-03-29 19:49:59 -04:00
6cbc3fb97d
Fix a minor inconsistency between router and DRC
...
Also make sure collision highlighting runs at the starting
location of a drag.
See: https://gitlab.com/kicad/code/kicad/-/issues/7672
2021-03-29 19:41:17 -04:00
8be9832153
PNS: Don't highlight Net 0 (the unconnected net)
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8040
2021-03-29 17:45:07 -04:00
38c849bde7
Pcbnew: load write board netlist to file tool action dynamically.
...
Loading this advanced configuration option statically will cause it to
show up in the hotkey list even when the option is disabled. Creating
the tool action at run time resolves this issue.
2021-03-29 09:04:55 -04:00
3c51964c57
drill report: use more digits in float values for diameters.
...
(Use same resolution in map and rpt files)
2021-03-29 13:02:43 +02:00
f2e68e68d0
Add "Hide Tree" context menu options when tree has no selection.
...
Also cleans up some other code to be more consistent between symbol
editor and footprint editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/8052
2021-03-29 12:02:00 +01:00
6d2f80b4cf
Pcbnew: add write board netlist to file support.
...
This is hidden behind an advanced configuration setting and is primarily
useful for developers trying to troubleshoot the netlist payload sent
from the board editor to the schematic editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/8051
2021-03-28 08:38:29 -04:00
475ac3697f
Ensure toolbar controls have the correct width on frame creation
...
Otherwise they could be slightly too small and then look odd.
2021-03-28 13:07:56 +01:00
d0d6352a25
Fix crash launching footprint editor frame
...
Apparently we get this event before the frame is fully-baked
2021-03-27 23:48:07 -04:00
42c6af4bd8
Cleanup ACTION_MENU creation in some places
...
The ACTION_MENU constructor now takes the tool as an argument,
so the call to SetTool() immediately following it can be removed
and the tool just passed into the constructor.
2021-03-27 19:16:58 +00:00
9535153f9e
Move the import graphics menu item to the action
2021-03-27 19:04:16 +00:00
7bfa8575fa
Remove redundant information from import/export menu item labels
...
Saying "Import/Export" on the labels when the submenu has "Import"
or "Export" in it is redundant.
Note that we can't just update the action text with the new name,
because that is used in the hotkey list and would become too confusing
without the "Import"/"Export" text.
2021-03-27 18:50:35 +00:00
eb8744816e
pcbnew: fix the i18n of the rules syntax help
2021-03-27 16:26:13 +00:00
f6041fb52d
Force update of some text when activation status changes
...
The text areas aren't always redrawn when the window is activated
or deactivated, so we need to force a refresh of the text to ensure
it is the correct font color.
2021-03-26 15:50:56 +00:00
d18323dcf0
Excellon file writer: remove not very useful comments outsider the header section.
...
Looks like comments outside header section can create problems in some readers.
Note: comments inside header section are clearly allowed in Excellon file format)
(trial to fix bug 8032)
2021-03-26 09:46:32 +01:00
132ec37b56
Handle arc in buildHullForPrimitiveShape
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8008
2021-03-25 21:25:30 -04:00
34a435cd56
CADSTAR PCB: Handle import of pads with different paste and mask sizes
...
KiCad doesn't yet support full padstacks, but at least we can use the
solder mask / solder paste expansion to import a better result. Also
we can disable the specific layer if the shape has a size of zero.
2021-03-25 17:54:56 +00:00
107a1990c9
CADSTAR PCB: Handle route offset
...
The CADSTAR post processor has a peculiar feature called "route offset"
which effectively shortens tracks when the pad, track or via that it
connects to has a smaller width. This operation is not saved in the
design itself, but applied as a post processing operation meaning that
the importer has to apply it when loading on the board.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6648
2021-03-25 17:50:33 +00:00
1468764f83
CADSTAR PCB: Lock footprint pads after import
2021-03-25 17:50:33 +00:00
3279e295ac
Don't start filling zones with possibly stale caches.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8014
2021-03-25 17:20:08 +00:00
a2ffb45698
Update diff pair rule syntax to be clearer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8010
2021-03-25 10:29:38 +00:00
bbd7b4ca8c
Eeschema, selection tool: uniformize the cursor shape and the actual modifiers.
...
SHIFT, CTRL, ALT modifier keys were handled in 2 different codes, one for
the selection tool and another to modify the mouse cursor shape, with 2
different configs.
Now the modifiers are managed from only one function.
Pcbnew: group also SHIFT, CTRL, ALT modifier keys management to a specific function.
Fixes #8021
https://gitlab.com/kicad/code/kicad/issues/8021
2021-03-25 10:28:20 +01:00
9a0f9575b6
Fix minor Coverity warnings
2021-03-25 09:12:24 +01:00
41839f7e3f
Update panel_setup_rules_help.md diff pair clearance example to use new A.isCoupledDiffPair() function
2021-03-25 03:33:19 +00:00
cb722c6bfa
Code style
2021-03-24 18:11:32 -04:00
75819206a0
Add support for dark theme in plugin icons
...
Action plugin authors can specify alternative icon path for dark theme.
If it's not specified then standard icon will be used for both light and
dark themes. If neither icon is specified then the default puzzle piece
icon is used.
Fixes #7984
2021-03-24 21:59:30 +00:00
b37b7d53b4
Fix geographic annotation bug when back annotating to schematic.
...
For some reason, the footprint UUID was being prefixed to the sheet path
which caused the symbol look up by sheet path to fail. An option was
added to not do this when the geographical back annotation to the schematic
is performed.
2021-03-24 09:57:36 -04:00
e409b04538
More gracefully handle tinyspline not liking a spline definition
...
Partial fix for #6634
2021-03-24 00:37:01 -04:00
f57dcf2a34
Fix connectivity to only resolve conflicts on netlist load
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8007
2021-03-23 17:43:24 -04:00
a94ce75c02
Fix multiple filter calls that were producing false cache positives.
...
When processing a compound shape we'd decide the first of them didn't
collide and then put false into the cache. The cache value would then
be used for all the other shapes in the compound shape, which very well
might actually collide.
Fixes https://gitlab.com/kicad/code/kicad/issues/8003
2021-03-23 21:06:16 +00:00
a94a481574
Fix compile warnings
...
Some simple warnings and also a deprecation warning from wx
because they felt that a function should be renamed...
2021-03-23 19:46:49 +00:00
4dbeb15024
Use a worker thread to send socket commands
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6503
2021-03-23 03:20:40 +00:00
381cc27548
Add missing include
2021-03-22 21:25:03 -04:00
49b1aceb8b
Handle doc urls enclosed in parens.
...
It seems this has become a common pattern in at least some of our
libraries.
Fixes https://gitlab.com/kicad/code/kicad/issues/7963
2021-03-22 21:20:54 +00:00
f24f0d93a5
Make OK default in inspectors (and hook up to close window).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7831
2021-03-22 21:20:54 +00:00
a677998f47
Don't select new items after cancelling move following item duplication
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7956
2021-03-22 18:49:43 +01:00
9ce34102af
Make sure projects get created for boards migrated from 5.x
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6886
2021-03-21 16:21:44 -04:00
8be213e36f
Trim includes (and use consistent terminology in error messages).
2021-03-21 20:15:47 +00:00
a9eb83201e
Remove ZONE::ClearFilledPolysList() and fix ZONE::Unfill()
...
ClearFilledPolysList is redundant and Unfill() was missing the clearing
of m_insulatedIslands
This fixes potential latent bugs in zone unfilling.
2021-03-21 20:13:20 +00:00
50aafb9d2a
Do not auto-refill zones when added or edited
...
The only exception is when using the Zone Properties Dialog and
user preference is enabled
2021-03-21 20:13:20 +00:00
7a255edc5f
Panel Edit Options: Fix "Show Page Limits" tooltip message
2021-03-21 20:13:20 +00:00
f6c4677189
ADDED Option to disable automatic zone filling in pcbnew
...
The new setting is stored as 'editing.auto_fill_zones' and controls
whether zones should be refilled after certain actions or not.
2021-03-21 20:13:20 +00:00
a743e0c52b
Add Zone fill to undo stack
...
Allows undoing zone filling and reverting to previous fill state.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7440
2021-03-21 20:13:20 +00:00
5e0b65c3a8
Change wording of corner rounding action
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4505
2021-03-21 15:55:56 -04:00
37242f67e0
Connectivity: just pick the most popular net to update conflicting clusters
...
CHANGED: when pad net assignments are changed in a conflicting way (i.e.,
tracks exist that short out more than one net after the change,
track nets will be updated to the net with the most pads).
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7929
2021-03-21 15:31:37 -04:00
f0ed5fab39
add missing include for wxWidgets 3.1.4
2021-03-21 17:35:20 +01:00
e1840ccbd3
Handle exceptions thrown by footprint library table
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7973
2021-03-21 11:43:24 -04:00
68f3d09ac1
altium: introduce tokenizer for query language
...
Based on this tokenizer, a LL1 parser will be built in the future.
2021-03-21 16:39:23 +01:00
fe196771d8
Implement isCoupledDiffPair() DRC rule function.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7975
2021-03-20 23:07:36 +00:00
44e2151ade
Allow diffpair gap to override netclass clearance value.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7975
2021-03-20 21:53:30 +00:00
ce46fe6581
Add insideFrontCourtyard and insideBackCourtyard DRC functions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7972
2021-03-20 21:53:30 +00:00
07aea4339d
Formatting.
2021-03-20 21:53:29 +00:00
4a53917efa
wrml exporter: optimize circle to segment approximation.
2021-03-20 18:16:58 +01:00
f1c599fa4d
Tweak PCB selection behavior to reduce unintuitive behavior
...
We were discarding shapes too aggressively for having a
larger area than a shape underneath.
Let's also try showing fewer disambiguation menus, in particular
always preferring items on the active layer when the candidates
include overlapping items of similar area on other layers.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7949
2021-03-20 13:11:51 -04:00
6924b98bc3
Remove deprecated BRIGHT_BOX preview item
2021-03-20 12:09:20 -04:00
c04e19f9ac
Include optimization: move some things from common.h to point-of-use
2021-03-20 12:09:18 -04:00
6d5536707c
wrml exporter: remove all duplicate code with Pcbnew. Especially, converting layers to polygons exist in Pcbnew, so no need to rebuild item shapes in the exporter. Moreover, in exporter, rebuilding shapes was not up to date and did not include changes in Pcbnew.
2021-03-20 13:44:52 +01:00
4073153e75
vrml exporter: fix incorrect export of zones on solder mask layers. minor changes in colors.
2021-03-20 11:13:55 +01:00
7a8abcadd2
PCB_SHAPE: Use SHAPE_ARC as the effective shape of an arc
2021-03-19 22:43:43 -04:00
6c3b02aabe
Cleanup (no functional changes).
2021-03-19 16:14:34 +00:00
3fec3a3a15
Fix a minor Coverity warning
2021-03-19 15:01:16 +01:00
90742bba9f
Adjust constraints after editing other points.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7103
2021-03-19 11:35:17 +00:00
4034fcb7ac
Fix yet another edge case in B&W printing of holes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7944
2021-03-18 23:50:04 +00:00
af88b01068
export_vrml: Better export of pad shapes, both on copper and paste layers.
...
It removes duplicate code between Pcbnew and the vrml exporter.
Remove also an useless option (plain board) that exported just the board body.
2021-03-18 20:43:27 +01:00
8d5161dae2
export_vrml: more code cleanup and export solder mask
2021-03-18 16:44:28 +01:00
95051c4786
Also duplicate arcs in pcbnew
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7943
2021-03-18 13:35:30 +00:00
e377f2667e
Adding COMMIT support before/after invocation of a python script
...
Allows undo/redo of ACTION_SCRIPT commands
2021-03-18 12:52:17 +00:00
16ef1910ff
export_vrml: more code cleanup and fix incorrect shape of round chamfered pads
2021-03-18 13:35:06 +01:00
074f0432f0
vrml exporter: more cleaning code and enhancements. Dialog exporter: Add option to use board center as coord origin.
2021-03-18 09:52:04 +01:00
b050823c98
export_vrml.cpp: mainly clean code and add some fixes.
2021-03-18 09:52:03 +01:00
36259b1f6b
Refresh lib trees after editing library tables.
...
Also make sure that we grab the library item descriptions from their
source rather than just the cached tree copy.
Fixes https://gitlab.com/kicad/code/kicad/issues/7875
2021-03-17 14:54:18 +00:00
46d71f0d23
Go back to validate-on-OK, but stop doing design checks.
...
If we keep doing design validations at two different places, they can
only start to drift apart. Board Setup should validate for malformed
data ONLY; everything else is the business of DRC.
This also fixes a bug where implementation validations would not allow
OK in the dialog, but wouldn't put up a message to say why. We now use
the InfoBar impl from Jon's commit for that.
2021-03-16 14:49:03 +00:00
bb8d31cd06
Fix context item selection filter type omissions
...
Fixes #7839
2021-03-16 13:08:50 +00:00
cad1cb0262
Improve naming.
2021-03-16 12:07:06 +00:00
c7648b4dba
Formatting.
2021-03-16 12:07:06 +00:00
2ad9da582a
Refresh geometry when clearance changes if clearance lines are shown.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7906
2021-03-16 12:07:06 +00:00
c3c3649211
Stop text from causing a shift during flip when >1 items are selected
...
1e1be730https://gitlab.com/kicad/code/kicad/issues/7304
2021-03-15 21:24:16 +00:00
b2ac9cc29f
Formatting & naming conventions.
2021-03-15 19:04:59 +00:00
a086795ac9
Pcbnew: fix dimensions text rotation and position.
...
Issue #6940 is not addressed, as being able to
rotate a dimension with a group is preferred over
easily rotating the text.
Fixes https://gitlab.com/kicad/code/kicad/issues/3847
2021-03-15 15:44:36 +00:00
cb451dc4b2
Pcbnew: Fix memory leaks and fix inefficient code.
2021-03-14 20:27:59 +01:00
52e2bf0000
Keep focus on filter boxes in footprint viewer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4884
2021-03-14 15:10:20 -04:00
a1b4bcc210
Refinements (add icons to menuitems and better help strings)
2021-03-14 18:44:31 +01:00
c763b0088e
Fix some issues in drawing_stackup_table_tool.cpp
2021-03-14 17:44:16 +01:00
3ba7fc0cc2
Move board stackup table drawing code from drawing_tool.cpp to drawing_stackup_table_tool.cpp
...
This avoid a too large drawing_tool.cpp file.
Remove also values in internal units and convert them to mm.
2021-03-14 17:44:16 +01:00
521982cbf6
Avoid double-redraw on board load
2021-03-14 11:42:09 -04:00
2cbd7b5043
Reduce scope of some view repaints to improve performance
2021-03-14 11:42:09 -04:00
2528e1fc98
EXCELLON_WRITER: update info in comments.
2021-03-14 12:38:03 +01:00
953279ce70
Gerber plot: fix missing AperFunction attribute for texts.
...
Fix also a incorrect AperFunction attribute for graphic items on Edge.Cuts
in footprints
2021-03-14 12:37:13 +01:00
f428ce03f2
ADDED: pcbnew - stackup / characteristics table
2021-03-13 20:19:46 +00:00
18470693fe
Copy linewidths when coverting to polygons.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7893
2021-03-13 17:06:49 +00:00
93db7a130a
Offset 3D models when moving footprint origin.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7868
2021-03-12 17:37:38 +00:00
faf9cca938
Fix many cases of old mils flag getting interpreted as allowEval flag.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7883
2021-03-12 15:15:50 +00:00
24fd326cd1
Make sure we have different strings for past & future tense.
...
(In English both were 'Set', but that means our translation framework
won't support two different strings in other languages. Changed to
'Add' and 'Added'.)
Fixes https://gitlab.com/kicad/code/kicad/issues/7888
2021-03-12 14:59:38 +00:00
ba46a8d12d
Fix some layout issues resulting from wxWidgets version bump.
2021-03-12 14:54:54 +00:00
a01bd52571
Use default line width when creating polygons.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7876
2021-03-12 14:54:54 +00:00
18037e2f65
Rework bitmap system to load from archived PNGs
...
Bitmaps are now identified by an enum class instead of by pointers.
Bitmap loading and caching is now handled by a class in common, and
we no longer compile most bitmaps into the binary, so there is no
longer a bitmaps static library.
Instead, bitmaps are archived to a .tar.gz file which is installed
in ${KICAD_DATA}/resources/images.tar.gz
The source PNGs are checked in to Git as the original CPP files were,
so that people can build without the required dependencies to convert
SVGs to PNGs.
Initial support is also added for dark theme icons, although this
is not yet exposed in the GUI.
Stubs are present for multi-resolution image resources, but this is
not fully-baked yet and could use some refinement.
2021-03-11 08:37:35 -05:00
4db10d419d
Implement future & past tenses for dry-run vs. changes made report.
...
Also improves zone reporting to list either the zone name or the layer
and coordinates.
Fixes https://gitlab.com/kicad/code/kicad/issues/7851
2021-03-11 12:34:02 +00:00
ea9c269914
Don't fill polygons converted from lines.
...
The lines couldn't have been filled, so the polygon shouldn't start
out filled either. The user can set it to filled if they want.
Fixes https://gitlab.com/kicad/code/kicad/issues/7867
2021-03-11 10:42:21 +00:00
4b88d4beed
Don't police the user.
...
There are too many holes and the police-state just makes it harder to
get back from error conditions.
Fixes https://gitlab.com/kicad/code/kicad/issues/7867
2021-03-11 10:38:32 +00:00
e48f86bfd6
Move default assignment on Mac.
...
CHANGED: add corner and repeat last command now default to 'I' instead
of '<insert>' on Mac.
1) wxWidgets doesn't currently display the correct graphic in the menu
for the insert key
2) Mac laptops don't have an instert key
Fixes https://gitlab.com/kicad/code/kicad/issues/5016
2021-03-10 13:35:04 +00:00
d4231d8e9f
Pcbnew: add footprint keepouts to Specctra DSN exporter.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7684
2021-03-10 07:18:37 -05:00
3d4ac9af03
Relocate win32 resource files to the central folder for further consolidation
2021-03-09 21:48:14 -05:00
d160b30ff1
Pcbnew: add keepout helper methods to ZONE object.
2021-03-09 08:13:06 -05:00
60b17e727a
Make sure pad locked flags get transferred on ExchangeFootprint.
...
They used to be in the footprint but were moved to the individual
pads a few months ago.
Also applies to text items.
Fixes https://gitlab.com/kicad/code/kicad/issues/7844
2021-03-09 12:29:14 +00:00
e2aa7be4b3
Added a lot of consts and refactored a few lines
2021-03-08 12:49:48 -08:00
2bc10d58b5
Fix some cases where PCB_FP_ZONE_T was left out.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7615
2021-03-08 13:00:46 +00:00
274d4e2eb4
Fix orientation of orthogonal dimensions
...
When drawing and editing orthogonal dimensions, take distance and
relative position to the end points into account.
Fixes https://gitlab.com/kicad/code/kicad/issues/7243
Fixes https://gitlab.com/kicad/code/kicad/issues/7189
2021-03-08 00:13:38 +00:00
0f22b54cd8
Clip the leader lines properly when using circular text frame
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7810
2021-03-07 21:19:19 +00:00
720147d272
Remove transitive inclusion of bitmaps.h
2021-03-07 16:08:57 -05:00
df99ee39d9
PNS: new through vias should span all copper layers
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7576
2021-03-07 17:58:43 +00:00
47145d349b
Don't run insideArea on ruleAreas.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7826
2021-03-07 17:55:30 +00:00
e0cbcc3330
Excellon drill files: add structured comments to identify via holes and pad holes.
...
This is useful for CAM tools because constraints for via holes and pad holes are
not the same
2021-03-07 17:47:37 +01:00
fde22da478
Greber drill files: Enable using flashed shapes for oval holes.
2021-03-07 17:44:59 +01:00
0fde536223
Adjust zones when moving footprint origin.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7825
2021-03-07 15:04:01 +00:00
d57f5b1a2c
DIALOG_GENDRILL: fix incorrect initialization of drill coord origin option
...
Fix also missing board change mark when drill plot settings are modified.
2021-03-06 09:47:42 +01:00
b691c18bfc
Allow netclass assignents to unnamed nets.
...
Most of the code had already moved over to this, but there were a few
hold-outs.
Fixes https://gitlab.com/kicad/code/kicad/issues/7802
2021-03-05 19:16:09 +00:00
3e9eb3c8ac
More complete fix for crasher JP found.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7806
2021-03-05 15:30:52 +00:00
68f958145d
Gracefully handle lack of diff pair settings
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7806
2021-03-05 09:09:56 -05:00
4ddb942ec0
Do not allow drag selection or drag move when already moving something
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7800
2021-03-04 19:01:31 -05:00
c85c14e6e4
Don't allow exponential notation in specctra export.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7786
2021-03-04 22:39:33 +00:00
bbf02a5f08
Formatting.
2021-03-04 21:23:45 +00:00
528f933ad5
Don't revert commit after user has OK'ed the dialog.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7799
2021-03-04 19:16:43 +00:00
d18afa42cd
Resync nets & netclasses after updateFromPCB.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7793
2021-03-04 15:05:06 +00:00
91350ec9ea
Don't update thickness unless it really changed.
...
Otherwise we're going to generate a continuous stream of OnUpdateUI
events....
Fixes https://gitlab.com/kicad/code/kicad/issues/5049
2021-03-04 14:15:39 +00:00
8831c5567c
Add win32 version manifest block
2021-03-04 00:34:48 -05:00
1fc399fa31
Fix a few more cases of picking up wrong mouse positions
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7745
2021-03-03 20:09:24 -05:00
1e1be730d8
Do not recalculate center from boundaries when flipping
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7304
2021-03-03 23:33:31 +00:00
b9d26a55f2
Show variable references of text in status bar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7790
2021-03-03 18:58:04 +00:00
fcb9af2b12
When saving footprint to library don't detach from board too early.
...
In particular, make sure it's been flipped to the front layer first.
We need to know the layers to do the flip.
Fixes https://gitlab.com/kicad/code/kicad/issues/7780
2021-03-03 15:07:01 +00:00
51d445007f
Switch to using make_shared in another place
2021-03-03 02:19:46 +00:00
908de37e7c
Don't hardcode the file extensions where possible
2021-03-03 01:13:59 +00:00
81570e02f3
Do not change orientation when moving orthogonal dimensions
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7727
2021-03-02 19:59:16 +00:00
bbd6a1db0e
Formatting
2021-03-02 19:57:19 +00:00
b33ec125ac
use "pattern" instead of "sourcelibreference" for footprints
2021-03-02 19:57:19 +00:00
a9ca1e4ebd
use "pattern" instead of "sourcelibreference" for footprints
2021-03-02 19:57:19 +00:00
6533b47f0a
use "pattern" instead of "sourcelibreference" for footprints
2021-03-02 19:57:19 +00:00
f90164f7cf
Fix some typos and improve wording
2021-03-02 19:13:49 +01:00
3199a88d54
Fix pcbnewshell not showing namespace inspector tools
...
on msvc build with recent wxpython
2021-03-02 17:12:57 +00:00
79a9d69ff5
Coverity fixes for issues 314755, 316287, 324536, 324539, and 324539.
2021-03-02 08:10:37 -05:00
d06e8ef01c
Honour pre-defined-size selections for diff pairs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7759
2021-03-02 12:12:05 +00:00
7760570d76
Treat action buttons in Symbol/Footprint Properties as OK, not Cancel.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7001
2021-03-01 20:37:04 +00:00
57e948ff08
Make sure axesEnabled is set before saving config.
...
We don't actually allow the user to change this at present, so one
could argue that we should remove it from what is saved out of the
config. But this is a smaller, safer change.
Fixes https://gitlab.com/kicad/code/kicad/issues/7666
2021-03-01 20:37:04 +00:00
cc6df515a1
Make ARCs accessible from python
2021-03-01 17:34:47 +00:00
f4cc9b86e3
Inform user (and bail on UpdatePCB) if annotation failed.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7310
2021-03-01 16:57:29 +00:00
1a9f55872c
Don't leave a pad with a netinfo pointer from the footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7766
2021-03-01 11:12:51 +00:00
83d07dc7f7
Comments.
2021-03-01 11:12:51 +00:00
63b5d8db43
Pcbnew: use MRU path when opening files in standalone mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7734
2021-02-28 14:30:16 -05:00
dbb6d0fb4a
Move paste and mask clearance settings back to board file
...
These are needed for correct Gerber plotting so need to be stored
along with the board file
2021-02-28 14:04:28 -05:00
4debfbcc53
Fix pcbnew cross probing ignoring the disabling of the cross probing zoom to fit setting
2021-02-28 10:39:51 -05:00
cd7a2cd807
Fix shadowing fix that caused logic bug and different shadowing
2021-02-27 20:01:14 -05:00
65531accf6
DRC: allow testing against particular diff pair membership
2021-02-27 19:54:55 -05:00
061218e567
Take a stab at fixing Python build issue.
2021-02-27 23:56:47 +00:00
3538c8a963
Thread safety for new caches (which are also used during zone fill).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7749
2021-02-27 21:33:30 +00:00
2606ecc619
Add isDiffPair() to custom rule syntax examples.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7746
2021-02-27 19:45:03 +00:00
jean-pierre charras
Jon Evans
Jeff Young
Marek Roszko
Tomasz Wlostowski
Seth Hillbrand
david-beinder
Simon Richter
Ian McInerney
Wayne Stambaugh
Allan Nordhøy
Fabien Corona
Roberto Fernandez Bautista
Jonathan Haas
Adam Wolf
Thomas Pointhuber
Mikolaj Wielgus
Carsten Schoenert
Konstantin Baranovskiy
firebladed
qu1ck
Jean-Samuel Reynaud
pgvoorhees
Fabien-B
Dominik Wernberger
WhiteChairFromIkea