When working in high contrast mode, we want to be able to select a
footprint with only elements in, e.g. silk and fab layers.
The previous design for footprint IsOnLayer had one behavior of every
other element and a different behavior for footprints. This leads to
multiple bugs as new features use the overloaded IsOnLayer expecting it
to report if the element exists on a layer or not.
For footprints, we need a different routine to determine whether or not
to select the footprint when clicking on it. IsOnLayer will report if
the footprint has any elements on a specific layer but we don't want to
use the bbox for a hittest because large footprints with through hole
pads will exist on every layer and have an enormous bbox. Instead, we
filter footprints based on the hittest of each element. This behaves in
a more logical fashion, allowing you to select a footprint by clicking
on a visible element of that footprint.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15284
This needs the ITEM_MODIFICATION_ROUTINE to learn to delete items.
Condense the item change handlers into a single injected object
(ITEM_MODIFICATION_ROUTINE::CHANGE_HANDLER) and provide the basic
implementation that just takes some callables.
This simplifies the construction of the routines and also would make
a CHANGE_HANDLER object possible that can be reused between different
tools.
In the EDIT_TOOL::ModifyLines method, there was some
remaining special-casing for FP childen commits.
One bit was put back by mistake (in
0b32ae3f4b) because I thought I'd
left it out of the refactor. In fact it was removed slightly later in
1218f61d0a.
THe other bit is omitting Modify commits in the FP-editor (what the
reinstatement of the above code was trying to cause). This shouldn't
be needed any more.
However, something is still incomplete here as the tools still don't
work correctly in the footprint editor. However, I don't think it's
substantially _more_ broken with the special casing removed and at
least it's less confusing.
Related to: https://gitlab.com/kicad/code/kicad/-/issues/15253
We were calculating the same thing in three locations and we missed
adding the clearance from the footprints in, resulting in bad fills and
missed drc errors (see QA addition)
- Support unicode footprint names
- Set default footprint text size and thickness to match KLC
- Position Reference at the top, Value at the bottom of fp bounding box
The IPC-7351C rule (which may be IPC 7352 now), is 25%, or
0.25mm, whichever is smaller. Currently the default ratio is 25%, which
is incorrect for pads with shortest edges over 1mm.
This also means that the "25%" default is applied in one place:
previously sometimes the value came from the default set in PAD,
rather than the value set by this dialog. While the PAD default isn't
changed here, this dialog no longer relies on that value for its
behaviour.
If KiCad crashes or exits without deleting the lockfile, don't show the
warning message unless we are not the one who locked it or there are
other KiCad instances running locally.
This should catch 99% of the cases where the message is shown
incorrectly. There may be some corner cases where the lock file is
created on a network drive using two different machines with the same
name and same user but these cases should be (famous last words)
sufficiently rare as to not be observed in practice
- Writes expansion values to board design settings
- Imports footprint regions on Cu layers as pads
- Adds support for holes in non-Cu polygons in footprints
Previous check only looked for the existence of a new (as of v6) flag
that controlled which strategy we took. Previous versions did not write
this flag and so will not hit the check. This works around a missing
version bump from when the feature was introduced.
KICAD_MANAGER_FRAME Ctor. Two advantages:
- it is built after the splash screen is dismissed.
- if there are issues when creating the PLUGIN_CONTENT_MANAGER, this is more
easy to debug
Also includes persisting settings for next dialog invocation
and use the TransferDataFromWindow function rather than per-field
accessor methods.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10651
The symbol editor has few enough items that it will still be performant
if we always send a selected-item-modifed event. (As it turns out we
were doing that anyway as the check for child-modified flags didn't
also check for selected.)
The draft fill and single zone unfill would only work if something was
selected first, this allows them to call the selection operation to
request what is under the cursor. Also properly gate the operation to
not cause crashes/issues when the selection contains non-zone items.
The lib watch on Mac may not actually remove the tree on DTOR, so we
need to force the removal. This also adds some additional debug flags
if the issue continues
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15173
Using the new ITEM_MODIFICATION_ROUTINE system, drop in two new
tools: chamfer and line extend. These are two geometric operations
that are relatively common when editing footprints in particular.
Chamfer delegates the geometric calculations to a dedicated unit
in kimath/geometry.
Describe the actions of the fillet tools is a generic way, so that the
same general pattern can be used for other tools that modify shapes on
the BOARD.
Basically, an "ITEM_MODIFICATION_ROUTINE" is defined, which is
configured and called multiple times, calling back to the EDIT_TOOL when
it modifies or creates an item.
The motivation here is to make it easier to slot in new line-based
tools like chamfer, extend and so on without having to redo the
complicated item, selection and commit handling each time, and keep the
core "routines" simple and decoupled from the EDIT_TOOL's
internals.
This also resolves#15094 because the new commit handling does the right
thing when items were "conjured up" for the fillet (e.g. when a
rectangle is decomposed into lines).
Fixes: #15094
Also moves the settings from Board Setup to Preferences > PCB Editor.
Also collapses Track Drag Mode from radio buttons to a choice menu to
save space and allow it to be with the other editing action modes.
It makes this ifo more easily readable.
- Remove duplicate properties
- Do not plot empty properties
- do not plot lib descr and keywords, useless in a pdf plot.
Note that "immediate" doesn't mean quite the same thing: while it will
enter the tool immediately, it won't necessarily finish the tool during
the call if the tool has an event loop. So for something like Rotate
"immediate" and "synchronous" have the same behaviour, but for something
like Move they do not.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15085
The actions the router uses for via placement can be a combination of
enum values, so the actions must use an int parameter instead of the
enum type.
Fixes KICAD-2DS
It had several encapsulation leakage issues, as well as poorly-defined
behaviour of undo for chained-actions (append-to-board, and then rotate
while moving, for instance).
in footprints when the text angle is 0 but the fp orientation is not 0.
It was due to the fact angle 0 is not written in file and use the default
value of the created PCB_TEXT in footprint, that is not always 0
Now the angle is always written in file.
Fixes#15054https://gitlab.com/kicad/code/kicad/-/issues/15054
Using a boolean argument just leads to a lot of trailing booleans in the
function calls and is not user friendly. Instead, introduce PostAction()
to send an action that runs after the coroutine (equivalent to passing
false or the default argument), and leave RunAction as the immediate
execution function.
Bounding box computation uses a temporary footprint, but the clone
operation keeps the group information. We can't delete a footprint if it
has group information, so just delete the group information.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14909
The edit is intended to be on the newly placed dimension, but the actual
properties tool doesn't take an item, so it was always looking up the
item to edit using the current selection/cursor position. Make this more
robust by just calling the edit properties directly on the item.
Using std::any from C++17 allows for proper type handling in the
parameter field, removing the need for casting to void* and then casting
the void* to the desired type.
Its members can be on copper layers, but the group itself isn't on any
layer.
Also fixes a bug where we were trying to clone TRIANGULATED_POLYGON::TRI
shapes as indexable sub-shapes. (The TRI only has indexes into its
parent, so cloning it will only result in segfaults down the line.)
Also fixes a bug where we weren't including copper items inside groups
when checking footprint net ties.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15021
The --board-plot-params argument was never parsed so it was always ignored.
[ADDED] A '--no-protel-ext' option to allow plotting gerbers with the KiCad
file extension (gbr) instead of the Protel gerber file extensions.
(cherry picked from commit 4e79d1ecdd)
The 1st level items being copied don't have their group information
copied, and we assert that it has been removed from the group on
deleting it, so we just reset the group membership to prevent the
assert.
Fixes sentry KICAD-22S
The plotter doesn't care about the grouping, and we expect the item to
have no group on deletion, so temporary items like this shouldn't be
part of one.
(Sentry issue KICAD-24Y)
When routing and using layerNext (hotkey '+') to switch to next layer,
it will skip invisible layer, when click BUT_LEFT, the new line should
be in the same layer (visible layer)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14480
The ReloadFootprint function now exists in the base class with 1
argument, but this frame already had a similar function with no
arguments. Rename this one to RegenerateFootprint to prevent warnings.
We don't really control when these are called, so best not to assume
we've finished initialization of the frame/screen/document/whatever.
Possible fix for KICAD-KY.
Note that this only works where a BOARD_COMMIT or SCHEMATIC_COMMIT is used.
(BOARD_COMMIT is used almost universally in PCBNew, but SCHEMATIC_COMMIT
has very little adoption in EEschema so far.)
ADDED: The -n or --negative option for exporting negative svg or pdf plots
from kicad-cli. Example usage: kicad-cli pcb export svg -n -l B.Cu board.kicad_pcb
This commit partially reverts deb3cbf8. VIA and SOLID operator='s introduced in it do a good job but the cloning of holes in addHole() causes bogus collisions.
The diff-pair placer creates DIFF_PAIRs on the stack, which have
VIAs in them, which have HOLEs in them. The HOLEs get put in the
NODE's index, and we then crash later when doing a collision after
the stack variable has gone out of scope.
The stack variable is also copied while doing a search for "best",
and without the operator= definitions the "best" and the "original"
both think they own the HOLE.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14852
We need to check if a lockfile is valid to determine if we should
override the lock. Valid() is true if the lockfile couldn't be created
b/c of permissions or if the lockfile could be created and acquired.
This was causing intermittent shove hiccups/freezes as RULE_RESOLVER::GetClearance() could return a bogus clearance value, taking
a cached value for an item that does not exist anymore. If the allocator/stack accidentally reclaimed such item's address - we were getting
very nasty and difficult to reproduce misbehaviours of the shove algorithm. Hopefully this patch fixes this. More info in the comments.
Note to self - I'm still not fully convinced I want PNS::ITEM pointers as the cache key, probably a unique counter would be better here.
When editing or viewing library symbols, the files are watched for
underlying changes. If any occur, the user is either prompted to reload
(if reloading would overwrite their current edits) or the file is
silently updated to the current version on disk.
This also sets a custom assertion handler to avoid unneeded crashes when
recieving invalid SAMBA packets and turns off assertions entirely when
running in release (non-debug) mode
The root cause was not removing the original (pre-dragging) via from the world, comparing the ITEM::Parent() pointers of the items was only hiding the main issue.
This also fixes the PNSViaCollisions test in the qa/ suite.
1) Also reorders parameters to make sure the compiler helps out.
2) This also makes it harder to mess up the discrepency between
BOX2I/wxRECT/etc::Inflate() and SHAPE_POLY_SET::Inflate.
3) Also fixes a couple of bugs where the corner strategy was passed
in as a segCount.
4) Also fixes a couple of bugs where the error wasn't forced to the
outside to match the ERROR_LOCATION.
5) Also fixes a couple of bugs where the seg count was specified
without regard to an already passed-in max deviation
Don't open-code knockout text shape generation in several different
places.
Make sure triangulated knockout text gets clearance added when
specified.
Collapse duplicated footprint text item plot routine (they're no
longer any different from plotting pcb text items).
Temporary and autosave files do not neccessarily have the correct
permissions set to replace existing project files. This updates the
permissions to match the existing values where possible
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13574
wxSingleInstanceChecker is meant for running programs, not file locking.
This implements an RAII class for file locking that stores the lock
files next to the file being locked, allowing it to be easily found and
removed. Also includes the ability to override the lock, with
information about the original owner
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14734
The previous test didn't handle is-self-tests between a hole and
its override in a different NODE. When calculating the pushout
force we don't remove the via (and its hole) from the current
node until after the calculation, so we end up checking for
collisions between the new (cloned) via's hole and the original
hole in the root node.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14795
The layer combobox color swatch was clipped when the combobox was
closed when the dialog was launched. Setting the minimum width
resolved the issue. This may have been a GTK only issue.
Operator[] was creating an empty entry in the connectivity map,
fooling us into thinking the item had already been added.
Worryingly, this bug has been in there since 2017; a recent
change in teardrops just happened to expose it.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14781
Change teardrop generation to rely more heavily on BOARD_CONNECTIVITY
for improved performance.
Add updating of teardrops on BOARD_COMMIT::Push().
Also converts m_CopperItemRTreeCache to std::shared_ptr.
We don't copy it around anyway, and having to create a new set
of std::unique_ptr's for each operation is likely to be more
expensive than std::shared_ptr's overhead.
Version 7 text alignment changed subtly for stroke fonts from version 6.
Additionally, the output has been different between screen and plotting,
leading to offset text in plotted output relative to the text shown on
screen.
This introduces a fudge factor in FONT::getLinePositions to correct the
offset in the plotting output relative to v6.
This also changes the SCH_PAINTER and PCB_PAINTER to correct the
relative offsets between GAL and PLOTTER classes. The source of these
offsets is atm unclear.
Fixes https://gitlab.com/kicad/code/kicad/issues/14755
If you drag a track out and connect to a pad then press the hotkey
to switch the track posture it may not switch because the track
posture selected when the pad was reached is different than the one
that the mouse trail placer drew. As the aspect switching is done
in the mouse trail placer it does not know that the line placer
already override the track.
To correct this, in LINE_PLACER::FlipPosture() if the aspect is not
currently manually forced then copy the current aspect from the
line placer to m_mouseTrailPlacer before calling the FlipPosture()
method of m_mouseTrailPlacer. This will only be done once per
dragging session as once the aspect is manually forced it remains
manually forced. This seems to fix the issue with no undesirable
side effects.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12369
A sheetpath is required to correctly resolve text variables.
Depending on currentSheet is rife with bugs.
There are many places where we do *not* want to be prepending
field names to the field values, such as netlisting,
building PDF hypertext menus, etc.
Also, Find/Replace needs to work on unresolved text, as
that's what we're going to display (and if replace nuked
your variable references you wouldn't be happy).
In particular, when a CN_ITEM is freed set all its anchor's
item pointers to NULL. (The anchors have a separate
lifecycle due to being std::shared_ptrs.)
Hopefully fixes Sentry KICAD-KV.
Also simplifies the scoring algorithm so that it only
differentiates between exact-match, match-at-start and
any-match. The rest of the position-based matching
stuff is gone, as is the knowledge of the name vs the
keywords vs the description. All that is left to the
provider of the weighted search terms array.
- SCH_SYMBOL::GetMsgPanelInfo(): slighly change the displayed lines to allow
longer strings in Description and Keywords
- panel_setup_rules_help.md: fix incorrect html link (URI), creating ERR 404
Provides a single-point access for modifying the schematic and symbol
elements that allows chaining updates and reverting partial changes.
Standardizes the undo hierarchy between pcb and schematic editors
As this is another layer on the existing undo/redo structure, the
initial commit does not replace all undo/redo calls currently existing.
These will be handled in a series of follow-on commits
Adds QA checks to copper sliver tests. Adds the following checks:
- Dot product between two arms (quickly avoids checks for >90°)
- Checks the sliver is convex (area test)
- Eliminates minor slivers with angles that are approximately 0 and ones
with the opposite side width beneath a configurable level
- Updates Clipper2 to fix a couple of jagged edges on inflate
- Adds simplify during zone fill inflation to limit jaggies
Fixes https://gitlab.com/kicad/code/kicad/issues/14549
in GetMsgPanelInfo() (PPI, scale).
m_image name was confusing: it is not a wxImage, but a BITMAP_BASE item,
and m_image name was already in use in BITMAP_BASE, used inside SCH_IMAGE.
Bitmap properties dialog: show PPI value and add Title to dialog.
Our basic logic for whether we have a hole or an outline in a footprint
checks if there is copper pads outside of the closed edge. This misses
the case where the footprint is used to align multiple holes but has no
copper. Since we do not support multiple outlines in a board, we can
safely assume that multiple, closed edges in a footprint represent holes
and not outlines
Fixes https://gitlab.com/kicad/code/kicad/issues/14468
Settings loading needs to account for potential chaining, so each
instance should be created before being Load()ed. Additionally, add the
settings loading to QA
Settings should be initialized on start-up. This removes the option of
lazily loading the settings from file and instead requires all settings
needed to be loaded on KiFACE start before requesting data from the
settings object
DRC exclusions were originally written following the C++
pragma model (ie: allow this violation here). However, the
"exclusion" terminology we used in the GUI suggests a model
model where the exclusions go away when the violation no
longer exists.
Fixes https://gitlab.com/kicad/code/kicad/issues/14351
That even was removed by upstream wxWidgets in
81570ae070
which is included in all versions after 3.1.1, so our 3.2 versions
definitely aren't doing anything when we pass this event. The actual
identifier has also been guarded behind a 3.0 compatibility define in wx
as of 3.3.
This method shadows the C++ method, and doesn't properly handle updating
the duplicated object's KIID to be unique.
Also add tests to ensure the KIIDs are unique after duplication.
Fixes https://gitlab.com/kicad/code/kicad/issues/14460
About 1/3 of callers to Parent() don't care if they get the immediate
parent or not, about 1/3 want only the immediate parent, and about 1/3
want the hole parent's Parent().
I had earlier changed PNS::ITEM::HOLE to override Parent() and return
the hole parent's Parent(), but since the callers are pretty evenly
split I've reverted that and added BoardItem() for callers who want the
eventual BOARD_ITEM (whether a direct parent or a grandparent).
(Also removes a dead routine so I didn't have to figure out which of
the two it wanted....)
(While we don't currently have holes without a parent pad or via, you
could imagine using HOLEs in the future to represent a hole in a first-class
board outline, so better not to build this assumption in.)
- LINEs now own their vias optionally (depending whether a LINE with its VIA belongs to a node)
- get rid of unique_ptr on the internal NODE::Add API (and also made it private)
- make sure stack pointers are not added to the node
- use rvalue reference for NODE::Add/NODE::Replace
Manually rebased by Jeff Young <jeff@rokeby.ie> 5 April 2023
pickSingleItem() had a two-attempt algorithm, but the second attempt
was never made because we'd check for no hits before throwing out the
aAvoidItems.
The second attempt would fail anyway because QueryHoverItems() ignored
the aUseClearance flag when not idle, and didn't factor in the actual
clearance.
The spacemouse driver, particularly on Mac, is extremely unstable and
causes crashes even when not being used. This places the interface
behind an advanced config flag to ensure that users can affirmatively
opt-in to the potential for crashes
- ensure the metadata GBR_NETINFO_CMP is added to all PCB_SHAPE living in a footprint
- fix a too zealous plot of negative objects on the silkscreen layers, when
merging layers to silkscreen layers.
This reverts commit 33da9b2327 and the
following commit dc08c48f33.
C++17 changed the behavior of static class member variables that are
constexpr defined. Previously this definition/declaration split was
valid for constexpr members, but after C++17 the static constexpr member
variables are automatically inlined, so the declaration is no longer
exported in some compilers (GCC 9/10/11 seem to have problems).
An alternate way of constexpr member variables is putting the
initialization in the class definition, but we can't init a COLOR4D
object when defining the COLOR4D class.
For now, revert this change until we can figure out the proper way of
architecting these colors.
Jon Evans
Seth Hillbrand
Mike Williams
jean-pierre charras
Roberto Fernandez Bautista
John Beard
Alex Shvartzkop
Josue
Jeff Young
Marek Roszko
Josue Huaroto
Ian McInerney
Ian McInerney
StuartTylerRelytDesigns
Kuba Sunderland-Ober
qu1ck
Tomasz Wlostowski
Wayne Stambaugh
Yang Hongbo
CraftedNightmare
Nils VAN ZUIJLEN
Steve Bollinger
Lucas Dumont
Nimish Telang
Salvador E. Tropea