This is a board file format change to account for the new properties.
Also, we now only store the critical information about the dimension's
geometry in the board, rather than storing every drawn line.
The DIMENSION object is now an abstract base, and ALIGNED_DIMENSION
is the implementation that exists today (we will add more dimension
types in the future)
1) For a while now we've been using a calculated seg count from a given
maxError, and a correction factor to push the radius out so that all
the error is outside the arc/circle. However, the second calculation
(which pre-dates the first) is pretty much just the inverse of the first
(and yields nothing more than maxError back). This is particularly
sub-optimal given the cost of trig functions.
2) There are a lot of old optimizations to reduce segcounts in certain
situations, someting that our error-based calculation compensates for
anyway. (Smaller radii need fewer segments to meet the maxError
condition.) But perhaps more importantly we now surface maxError in the
UI and we don't really want to call it "Max deviation except when it's
not".
3) We were also clamping the segCount twice: once in the calculation
routine and once in most of it's callers. Furthermore, the caller
clamping was inconsistent (both in being done and in the clamping
value). We now clamp only in the calculation routine.
4) There's no reason to use the correction factors in the 3Dviewer;
it's just a visualization and whether the polygonization error is
inside or outside the shape isn't really material.
5) The arc-correction-disabling stuff (used for solder mask layer) was
somewhat fragile in that it depended on the caller to turn it back on
afterwards. It's now only exposed as a RAII object which automatically
cleans up when it goes out of scope.
6) There were also bugs in a couple of the polygonization routines where
we'd accumulate round-off error in adding up the segments and end up with
an overly long last segment (which of course would voilate the error
max). This was the cause of the linked bug and also some issues with vias
that we had fudged in the past with extra clearance.
Fixes https://gitlab.com/kicad/code/kicad/issues/5567
Partititioning small polygons causes excessive partitions when we use a
fixed number of cells per side. Partitioning by size keeps the
partition count limited and speeds the calculations.
Also adds an option to not partition the grid for elements (like 3d
raytracing) that do not need it.
Fixes https://gitlab.com/kicad/code/kicad/issues/5579
... instead of modifying the argument.
This will make the method usable in python API and will not incur
permormance penalty because named return value optimization (NRVO)
is a thing since C++11.
But even if copy is not elided vector is moved instead of copied.
https://en.cppreference.com/w/cpp/language/copy_elision
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.
There is still some debugging output in test code that really needs to
be moved into a unit test.
Add debugging output section to the coding policy regarding debugging
output.
This allows for the tool framework to keep track of a universal
set of conditions for the UI state (enabled/checked/shown) for
controls of actions. It removes the need for the main menubar
menus to be CONDITIONAL_MENUs and be rebuilt on each open,
and instead makes the updates of the check and enabling of
items handled in the native wxWidgets way.
This commit switchs the 3d viewer and kicad project manager window
over to this system.
Remove some hacks related to postprocessing (not need now because the
previous postprocessing improvements, light parametrization could be
used for tune or future parameters could be implemented)
This introduces layer handling to a lot of the geometry routines.
Many of them don't do much with it now, but it does help multi-layer
zones and will help when padstacks are implemented.
KiCad stores 3D cache files but never gets rid of any of them.
This patch adds a new function called 'CleanCacheDir()'. Any cache
files older than the passed 'number of days' parameter are deleted.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1928
Implement blur based on depth weights.
Improve occlusion based on direct light/shadow it receives.
Improve occlusion mixing with the final color by using multiply instead
of subtract.
Remove debug and test code.
Swap syncs can limit the redraw rate as the screen waits for previously
issued syncs. Setting this to -1 allows for adaptive swapping
(resorting to unsynced if it falls behind) if it is supported by the
card but will fall back to unsynced (0) if the adaptive is not
supported.
Fixes https://gitlab.com/kicad/code/kicad/issues/4226
Various architecture upgrades to support this.
Creating a BOARD now requires a valid PROJECT, which caused
some (mostly transparent) changes to the Python API internals.
ADDED: Project local settings file
CHANGED: Board design settings are no longer stored in PCB file
CHANGED: Net classes are no longer stored in PCB file
CHANGED: Importing board settings now reads boards, not just projects
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2578
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4070
There were a lot of plotters, exporters, etc. that were rolling their
own implementations.
This also introduces a lazily-built set of SHAPE objects for doing
collision detection and some forms of rendering (and later DRC).
Dragging filled zones in OpenGL was extremely slow due to the
invalidated triangulation cache. Moving the zone should also move the
triangles and keep the cache valid.
It's currently only supported in the Footprint Editor. It could be
easily added to the board editor (all the code is there), but the board
editor is a little short on room in the drawing tools toolbar.
A note to developers, please do not set the minimum and/or size of bitmap
buttons. It causes bitmaps to get clipped using GTK on Linux. If the
bitmap button size is not acceptable, then supply an appropriately sized
bitmap rather than attempt to force the wxWidgets sizing mechanism to do
what you want. This almost always causes platform differences that do
not work well.
You can now choose the behavior of dragging with the
middle and right mouse buttons.
You can also choose which modifier keys to use for
panning and zooming with the scroll wheel or trackpad.
You can also customize the zoom speed, which makes
it possible to have a good zoom experience on a wider
range of input devices.
You can also now zoom by dragging with the right or
middle button if desired.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/3885
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4348
* Push all sizing operations into EDA_BASE_FRAME
* Save the unmaximized window size when maximizing
so that we can then save it in the config if the
window is maximized. Otherwise the config ends up
with the maximized size saved, and weird behavior
occurs when unmaximizing on the next opening.
* Use GL vertex buffers and index buffers for 3D model rendering
* Use material or average vertex color for bounding boxes instead of red
* Reinstate bounding box rendering with GL vertex/index buffers
* Use compact vertex/index data representation
- 8-bit normals
- 8-bit colors
- 16-bit or 32-bit indices, depending on model size
This should improve performance a bit on lower end GPUs with less memory
and bandwidth.
Fixes#4112
Move the camera out to its own so that everything else is board-
related, and then rename BOARD_ADAPTER.
At some point the flags should probably be moved out too, and they
can have the EDA_3D_SETTINGS name.
Replace SEVERITY_ERROR by RPT_SEVERITY_ERROR to avoid collision with a system definition.
Replace other SEVERITY_XXX by RPT_SEVERITY_XX for consistency.
Fix compil warnings and some other compil issues.
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme
Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
Previously, OnModify() was called for a lot of items, even when not modified.
For large schematics, the calculation time was unreasonable ( several minutes)
It is now called only a few times.
Remove holes on Silk layer by default so the behaviour is the same
on OpenGL and Raytracing.
Fixes#1836
Fix raytracing shadow offset issue.
Some codestyle fix.
Remove the CACHE_WRAPPER whose sole purpose was to allow the
cache to be stored in the project, and instead just have the cache
inherit the proper class.
Rotating to 0 when above pi would result in the board spinning back
through pi to get there. This led to jarring motion.
Also fix an issue added in b6f64815 where the board would rotate
2pi when crossing over the 0-2pi boundary.
* Split up the thirdparty code into the thirdparty folder (#3637)
* Create a new kimath static library containing all the math functions
This is part of cleaning the build system for #1906.
The 3d viewer is the last component to not use the action framework, so
we descope the common defines to its canvas. Once the 3d viewer is
converted, we can remove these entirely.
The floor render in raytracing creates interesting shadow effects but
significantly increasing the processing time for renders and has the
side effect of making the bottom of the board very dark if you simply
flip it over. Making this option off by default, we allow power users
to turn it on if needed for their renders while speeding up the default
raytrace and preventing new user confusion.
Given that we compare the dot product (square of length) to s_min_dot,
it means that s_min_dot also needs to be square, or we wind up
converting line segments into circles that are visually distinct from
circles, leading to gaps in polylines.
* Push a function into CONDITIONAL_MENU that adds the item
* Modify the tooltip for close and exit items to have the
program name
Fixes: lp:1835454
* https://bugs.launchpad.net/kicad/+bug/1835454
In singletop mode, all frames show the "Quit" option in the file menu
and will quit on Ctrl-Q. When launched from the main KiCad interface,
sub-programs show the "Close" option instead and will close with Ctrl-W.
In this mode, Ctrl-Q will instruct the main program to exit.
Fixes: lp:1779938
* https://bugs.launchpad.net/kicad/+bug/1779938
This allows a setting where the path is not one of the options. This
permits the user to select once to go to any path option (rather than
off the current and then back to currect) when the filetree doesn't
match the dropdown. This also selects the drop down item if it matches
the tree.
(cherry picked from commit f5284ced54)
A few files snuck in with CRLF for the line endings. These make it hard
to look at diffs as every line appears to have changed. This commit
makes only line ending changes, so can be ignored
It's a bit of a hack because they're statically initialized and
so we can't make use of the _() macro. We do still want it in the
code, however, because the string harvesting is based off of it.
Fixes: lp:1833000
* https://bugs.launchpad.net/kicad/+bug/1833000
This corrects an issue with fill segments-per-circle and moves the error
to segmetns calculation down in a number of functions to expose the
single value for approximation
This removes the remaining hard-coded segments counts and replaces them
with the relative error calculation where the segments per arc is
determined by the maximum error we allow (smaller arcs = fewer segments)
Provide a toolkit-agnostic interface for "busy indicators", which
allows the 3D viewer to show a busy cursor, without the canvases
having to to know how a wxCursore works.
The motivation here is to decouple the 3D renderers from the WX
GUI system, as they can then be used when when there is not an
active window (e.g. for offscreen rendering).
Otherwise, attempting to use a wxBusyCursor without a GUI
available is an instant segfault.
In some linux configurations, the canvas refresh must be posted before
being handled. Simply requesting the refresh can queue the event,
preventing an up to date GL canvas from being saved.
Fixes: lp:1819536
* https://bugs.launchpad.net/kicad/+bug/1819536
Use the icon scaling logic and call a toolbar rebuild when the
common settings change (echos the handling in Pcbnew and friends).
Remove an unused function.
The 3D viewer also uses OpenGL, so it also needs to
adjust based on DPI scale factors.
This patch moves the 3D viewer common config code solely
within the 3D viewer, and adds handling of the DPI scale. This
also avoids duplicated logic in PCB_BASE_FRAME::CommonSettingsChanged.
For now, as EDA_3D_VIEWER is not included in the Kiway settings
dispatch, still manually invoke the settings update from
PCB_BASE_FRAME.
The PANEL_3D_PREV gets a similar function to read the config, but
it doesn't have a listener for the update, so it's set just once
at dialog init, just like the existing pan settings.
Fixes: lp:1823681
* https://bugs.launchpad.net/kicad/+bug/1823681
For legacy boards, the setting is picked up from the board outline
thickness. If the board outline has mixed thicknesses, then the
max is used and a warning is displayed.
Fixes: lp:1797787
* https://bugs.launchpad.net/kicad/+bug/1797787
Allows 0 to 4 chamfered corners, not only one.
A custom shape allow this kind of shape. However because it is a primitive,
it is easier to edit and it support thermal reliefs.
Libpolygon can provide its own includes via target_include_dirs PUBLIC.
This means any linking targets do not need to specifiy them manually.
As common requires polygon, the polygon dep is also now no longer
required downstream of libcommon, as it's transisitvely implied
by libcommon's target_link_libraries.
This resolves a circular dependency previously detected and also
simplifies CMakeLists.
Add code to parse OpenGL version string and determine if ray tracing is
supported.
Rationalize ray tracing menu and toolbar to have the same behavior so
a single command ID can be used for setting states.
Fixes lp:1797500
https://bugs.launchpad.net/kicad/+bug/1797500
The standard DIM() macro was not typesafe as it happily deferred errors
to runtime that can be caught at compile time. Replacing it with a
generic C++11 constexpr allows for typecasting, comparison and compile
time error checking.
Where we can get away with lower segment counts (localizing an anchor),
we keep the low-def 16 segment count. Intermediate values and values
that are visible to the user are set to high definition. Most are
simply hints to the inflation correction but where they show, the user
show see smooth lines.
The hotkey name "Help (this window)" does not describe what the hotkey
and associated action does. It displays the current hotkey list, so the
action name should reflect that behavior
Currently, the plugindir in the plugin manager is constructed as
{CMAKE_INSTALL_PREFIX}/bin/../{CMAKE_INSTALL_LIBDIR}/kicad/..., while
CMakes install uses {CMAKE_INSTALL_LIBDIR}/kicad/...
In case CMAKE_INSTALL_LIBDIR is a relative path "install" prefixes it
with CMAKE_INSTALL_PREFIX and both paths happen to match, otherwise
the constructed path ends up as e.g. "/usr/bin/../usr/lib/kicad/...".
For these cases where an absolute path is wanted CMake provides the
CMAKE_INSTALL_FULL_<dir> variants which works the same as
CMAKE_INSTALL_<dir> when used as DIRECTORY for install.
The middle layer of the 3d contours does not need threading as it does
not have substantial calculations. It also contains has a few
wx*Asserts that may not be called from other than the main thread.
Rather than remove useful error checking, we remove excess threading.
Fixes: lp:1802940
* https://bugs.launchpad.net/kicad/+bug/1802940
Mario Luzeiro
Ian McInerney
jean-pierre charras
Jon Evans
Jeff Young
Seth Hillbrand
qu1ck
Wayne Stambaugh
Peter Montgomery
Tomasz Wlostowski
Joshua Redstone
Electro707
Érico Rolim
Simon Richter
Emery Burhan
Oleg Endo
Fabien Corona
Mark Roszko
Michal Jahelka
Seth Hillbrand
Simon Schubert
Michael Kavanagh
Henner Zeller
John Beard
Stefan Brüns