54e18f6b1f
Pcbnew: remove update schematic option for geographical annotation dialog.
...
REMOVED: Update schematic option from geographical annotation dialog due
to potential issues with incomplete and/or broken updates. Use "Update
Schematic from PCB" tool to update reference designation changes.
Forcing the footprint reference designator changes back to the schematic
without checking any other board changes in the schematic could leave the
schematic in a undefined state. The update schematic from board tool is
the correct method to sync any changes from the board.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8042
2021-04-22 12:45:59 -04:00
620aa315f6
Show infobar error when asking for empty datasheet.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8260
2021-04-21 15:40:59 +01:00
afe0c79a1e
Sheet pins need new UUIDs, too
2021-04-18 22:14:15 -04:00
1e52f0a180
Make sure pasted symbols get new pin UUIDs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8218
2021-04-18 21:53:38 -04:00
15353e3c33
Eeschema: when placing a new symbol or image, avoid starting the autopan.
...
When activate the new symbol placement, the mouse cursor is outside the canvas.
Therefore a autopan was started and not so easy to stop.
Now the mouse cursor (and the graphic cursor) are moved to a better location inside the canvas.
Fixes #8156
https://gitlab.com/kicad/code/kicad/issues/8156
2021-04-11 18:01:25 +02:00
cc956695ae
Hit test for worksheet before adding Properties to menu.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8171
2021-04-11 14:18:35 +01:00
21d4197eab
Apply SPECIAL_CASE_LABEL_INFO architecture to one-ended-drag.
...
We've been doing this for some time to wires that are attached to
the moving block (and therefore have the other end anchored). However
we also need to apply it when dragging a single end of a wire.
Fixes https://gitlab.com/kicad/code/kicad/issues/7807
2021-04-07 14:40:07 +01:00
30a073c2bb
Cleanup.
2021-04-07 14:40:07 +01:00
895f3de455
Formatting.
2021-04-07 14:40:07 +01:00
2b86b34124
Eeschema: split out SCH_SHEET_PIN declarations into separate header.
2021-04-06 17:15:49 -04:00
7d9ee76f64
Don't iterate through m_selection if deleting items from it
...
Use the copied container saved_selection instead
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8126
2021-04-05 18:40:40 +00:00
e08387ce3d
Make the GAL responsible for the native cursor management
...
The native cursor must be set on the GAL canvas wx object,
not its frame (otherwise on GTK the cursor is only set
when we get a request for it from the WM and not immediately).
Fixes https://gitlab.com/kicad/code/kicad/issues/6421
2021-04-05 02:36:12 +01:00
329577cc5c
Add new text items/labels to the selection so rotate/mirror/etc. work.
...
Also clears the selection after finding the sheet in the sheet pin
case so that the sheet itself doesn't get rotated/mirrored/etc.
Fixes https://gitlab.com/kicad/code/kicad/issues/8108
2021-04-03 19:41:24 +01:00
32e8a17cc0
Fix nullptr error.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8102
2021-04-03 11:15:11 +01:00
bb95761642
Remove unused variable
...
item is already an SCH_ITEM, so the static cast is pointless.
2021-04-02 19:26:22 +01:00
c7d689a022
Show field children when creating new labels.
...
And in particular, show reasonable intersheet reference facsimiles.
2021-04-02 15:15:07 +01:00
0a0935e0f3
Remove ACTIONS::TranslateLegacyId and TOOL_DISPATCHER::DispatchWxCommand
...
After commit 9535153f9e
2021-03-30 23:20:22 +00:00
f2e68e68d0
Add "Hide Tree" context menu options when tree has no selection.
...
Also cleans up some other code to be more consistent between symbol
editor and footprint editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/8052
2021-03-29 12:02:00 +01:00
14e73d24dc
Naming conventions.
2021-03-29 11:46:05 +01:00
455e7dc3a8
Reorder for better readability and consistency.
2021-03-29 11:04:06 +01:00
1b163c5dd3
Don't eat delete event when there's no item being drawn.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8061
2021-03-29 10:59:45 +01:00
0561ce903e
Don't remove IS_MOVED flag too early.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8056
2021-03-28 20:05:41 +01:00
c32932a311
Naming conventions.
2021-03-28 20:05:41 +01:00
42c6af4bd8
Cleanup ACTION_MENU creation in some places
...
The ACTION_MENU constructor now takes the tool as an argument,
so the call to SetTool() immediately following it can be removed
and the tool just passed into the constructor.
2021-03-27 19:16:58 +00:00
bbd7b4ca8c
Eeschema, selection tool: uniformize the cursor shape and the actual modifiers.
...
SHIFT, CTRL, ALT modifier keys were handled in 2 different codes, one for
the selection tool and another to modify the mouse cursor shape, with 2
different configs.
Now the modifiers are managed from only one function.
Pcbnew: group also SHIFT, CTRL, ALT modifier keys management to a specific function.
Fixes #8021
https://gitlab.com/kicad/code/kicad/issues/8021
2021-03-25 10:28:20 +01:00
b37b7d53b4
Fix geographic annotation bug when back annotating to schematic.
...
For some reason, the footprint UUID was being prefixed to the sheet path
which caused the symbol look up by sheet path to fail. An option was
added to not do this when the geographical back annotation to the schematic
is performed.
2021-03-24 09:57:36 -04:00
be51be22a7
Update Page Number when Duplicating or Pasting sheets
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7872
Also, update hierarchy before renaming pasted sheets
Avoids duplicate sheet names when pasting multiple sheets
2021-03-23 02:48:07 +00:00
cf4cbea8a1
Use a more robust storage of items added to drag.
...
We kept having various issues of the pointer list going stale. This
will prevent all permutations of that.
Also while I was in there I fixed the double-move thing (see bug
number).
Fixes https://gitlab.com/kicad/code/kicad/issues/7910
2021-03-22 13:51:10 +00:00
c5c348538e
Fix some STL asserts in EE_SELECTION_TOOL
2021-03-21 22:01:45 -04:00
c04e19f9ac
Include optimization: move some things from common.h to point-of-use
2021-03-20 12:09:18 -04:00
f0e6f812ff
Edit One Field improvements.
...
1) Accept <enter> as OK if the multiline textbox isn't shown.
2) Focus and select all in first control if multiline textbox isn't shown.
3) Make title be title caps ("Edit Sheet name Field" looked dorky).
Fixes https://gitlab.com/kicad/code/kicad/issues/7940
2021-03-20 00:41:09 +00:00
2e129d9b47
Naming conventions and other cleanup.
2021-03-19 23:06:19 +00:00
4b46c0c954
Make sure nested settings get released in dtor
...
Also fix a crash if sim window can't be created because
ngspice shared library could not be found
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7969
2021-03-19 19:04:27 -04:00
e206a9d39a
Naming conventions.
2021-03-18 12:28:24 +00:00
cc70a9fa98
New components must be added to the screen.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7952
2021-03-18 12:28:24 +00:00
35d17929ff
Add specific warning for no symbol library selected.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7954
2021-03-18 12:28:24 +00:00
7e682e9948
Don't allow pins on corners.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7917
2021-03-16 22:03:08 +00:00
30fdba4cbb
Finish grid-snapping impl.
2021-03-16 22:03:08 +00:00
ee4bc8b1d0
Fix default line width for symbol editor graphic items, add validation
...
There was a mils to iu conversion missing for line width (the default
values are in mils).
Fixes https://gitlab.com/kicad/code/kicad/issues/7813
2021-03-16 13:50:41 +00:00
2bafc1af00
Give up on using preview layer for PlaceComponent.
...
1) Cloning the component fails to select all its pins.
2) Something about the layer compositing causes light selection shadows
to get even lighter. The default pretty much disappears.
Fixes https://gitlab.com/kicad/code/kicad/issues/7908
2021-03-15 19:04:59 +00:00
573dd36515
Handle <delete> in move and drawing tools.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7924
2021-03-15 14:23:54 +00:00
afab60ae06
Fixes for autoplace fields.
...
1) Don't factor in pin names when computing symbol body boundingbox.
2) Grid-snap only in the axis corresponding to the layout side.
3) We only need interline spacing *between* lines, not for each line.
4) Also cleans up the unit checking logic as the unit can't be more
than 0 unless it's a multi-unit symbol.
Fixes https://gitlab.com/kicad/code/kicad/issues/7907
2021-03-15 02:23:29 +00:00
7415bf0c62
Don't hide (or disable) options if it's not obvious why.
...
It deprives us of the opportunity to inform the user what the conditions
are.
2021-03-15 02:23:29 +00:00
e34734c230
Make sure pasted sheet instances get added.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7872
2021-03-13 16:34:30 +00:00
18037e2f65
Rework bitmap system to load from archived PNGs
...
Bitmaps are now identified by an enum class instead of by pointers.
Bitmap loading and caching is now handled by a class in common, and
we no longer compile most bitmaps into the binary, so there is no
longer a bitmaps static library.
Instead, bitmaps are archived to a .tar.gz file which is installed
in ${KICAD_DATA}/resources/images.tar.gz
The source PNGs are checked in to Git as the original CPP files were,
so that people can build without the required dependencies to convert
SVGs to PNGs.
Initial support is also added for dark theme icons, although this
is not yet exposed in the GUI.
Stubs are present for multi-resolution image resources, but this is
not fully-baked yet and could use some refinement.
2021-03-11 08:37:35 -05:00
068e85c567
Reset moved flag after completing move.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7818
2021-03-10 16:00:28 +00:00
e48f86bfd6
Move default assignment on Mac.
...
CHANGED: add corner and repeat last command now default to 'I' instead
of '<insert>' on Mac.
1) wxWidgets doesn't currently display the correct graphic in the menu
for the insert key
2) Mac laptops don't have an instert key
Fixes https://gitlab.com/kicad/code/kicad/issues/5016
2021-03-10 13:35:04 +00:00
8be3ff5a0a
Perform a slightly more aggressive cleanup.
...
Also removes the functionality that selects the newly-added item as
we don't do that with any of the other drawing tools.
Fixes https://gitlab.com/kicad/code/kicad/issues/7833
2021-03-09 21:42:35 +00:00
720147d272
Remove transitive inclusion of bitmaps.h
2021-03-07 16:08:57 -05:00
22b4a74bfa
Don't forget intersheet refs when collecting non-view items.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7819
2021-03-07 15:04:01 +00:00
3ab1ef7b83
Formatting.
2021-03-07 15:04:01 +00:00
0fc8a9d89a
Eeschema: Fix ctrl-MMB double click to perform 'Zoom to Objects'
...
CHANGED: Ctrl-middle mouse button double click should perform
'Zoom to Objects' in Eeschema, but a change in modifier key handling
broke it. This MR restores the functionality.
Fixes https://gitlab.com/kicad/code/kicad/issues/7803
2021-03-04 22:43:03 -08:00
4ddb942ec0
Do not allow drag selection or drag move when already moving something
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7800
2021-03-04 19:01:31 -05:00
7a00e01b3e
Eeschema: fix false positive library symbol changed ERC errors.
...
This fix required sorting all of the LIB_PART draw items to ensure
accurate comparison between the symbols stored in the schematic and the
original library symbols. This has a noticeable impact on symbol library
load performance. It may also cause significant changes the next time
the library is saved due to changes in the draw item sorting. Hashing
may be a better solution here but this addressed the immediate problem.
A skeleton method SCH_SCREEN::SwapSymbolLinks() was added because there
is most likely an issue with orphaned symbols in the schematic library
symbol cache during undo/redo operations. More testing is required to
verify this.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7263
2021-03-04 17:59:24 -05:00
1fc399fa31
Fix a few more cases of picking up wrong mouse positions
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7745
2021-03-03 20:09:24 -05:00
908de37e7c
Don't hardcode the file extensions where possible
2021-03-03 01:13:59 +00:00
f90164f7cf
Fix some typos and improve wording
2021-03-02 19:13:49 +01:00
375cd12258
Eeschema: never replace event position in wire drawing tool
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7745
2021-03-01 12:17:18 -05:00
9797bc5f25
Left Mouse Button: use same modifiers for Pcbnew, Eeschema and pleditor for selection.
...
It also means the "force disambiguation menu" uses now Ctrl in Eeschema and pleditor.
2021-02-25 08:22:35 +01:00
0bab025832
Fixup toolchaining for immediate mode
...
The move tool can stack on others, so when we re-enter the previous tool
this caused another immediate action. We flag re-entry in the tool
stack to check for this and avoid unexpected tool starts
2021-02-24 10:44:54 -08:00
2fd5f25c3c
Allow expand selection to work (even if you probably can't get there).
...
I think the guessSelectionCandidates narrows down to a single item
in 99.9% of cases, so we can probably remove this entirely. But for
now it's safer just to fix it.
2021-02-24 14:12:32 +00:00
1786ae8773
Eeschema: use symbol nomenclature for object file naming.
2021-02-24 08:48:02 -05:00
0518d9c546
Add more force-immediate tools
2021-02-23 17:05:03 -08:00
005622027f
Add component/footprint is always immediate
...
When a user clicks on the "Add Component", "Add Power" or "Add Footprint"
icon, they want to add the item. Requiring an extra click on the screen
before selecting the component/footprint is not needed.
2021-02-23 16:15:31 -08:00
7318417ca4
Fix typo in expand-selection-disambiguation menu logic.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7654
2021-02-23 22:09:00 +00:00
c0487e5c87
Don't leave the cursor position forced.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7665
2021-02-23 21:43:41 +00:00
8755f55956
Fix copy-paste error.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7674
2021-02-23 17:50:11 +00:00
a9ea617069
Add some defensive code for double-moves.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7665
Fixes https://gitlab.com/kicad/code/kicad/issues/7502
2021-02-23 16:38:18 +00:00
9eb2113a50
Make TwoClickPlace cursor handling match SingleClickPlace.
2021-02-23 15:28:45 +00:00
d7b6d4a541
Warn user when placing a junction is just going to remove it again.
...
Also removes a duplicate call to SaveCopyForRepeatItem (which has
already been done in AddItemToScreenAndUndoList).
Fixes https://gitlab.com/kicad/code/kicad/issues/7651
2021-02-23 12:51:15 +00:00
a3b9e8ddb4
Round 2 of Worksheet -> Drawing Sheet.
2021-02-23 11:57:44 +00:00
cad5198ab7
Worksheet -> (industry standard) Drawing Sheet.
2021-02-22 17:35:46 +00:00
09d3667bce
Fix bone-headed mess up of two-click-place.
...
Original architecture was to pass KICAD_T in to specify what kind of
object you wanted. That didn't work well with things like cursor
shape so it was moved to setting booleans based on the ACTION. When
I cleared out the old KICAD_T stuff I missed one case where it was
still used. That is now corrected as well.
Fixes https://gitlab.com/kicad/code/kicad/issues/7651
2021-02-22 11:54:03 +00:00
781d293b60
Add option for text updating to Update Symbol.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6420
2021-02-22 00:36:40 +00:00
afb4bbde47
Bug fixes to Eeschema context menu.
...
1) Fix typo in SingleSymbolOrPower
2) Remove Edit reference/value/footprint items for power symbols
2021-02-21 23:45:32 +00:00
f9c42585fb
Force immediate action for auto start wire feature
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7503
2021-02-21 18:43:34 +00:00
18d4d517b0
Implement RMB Import Sheet Pin as a single-shot.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7638
2021-02-21 15:46:53 +00:00
907e282347
Silence some msvc warnings
...
- exception variables that were unused
- RAYSEG2D improperly foward declared with class instead of struct
- unused vars
2021-02-20 11:58:55 -05:00
26cb05051b
fixup! Whittle down library tree context menus to be more contextual.
2021-02-19 19:07:45 +00:00
57e043e0e6
Don't allow moving markers. Do allow excluding them.
2021-02-19 19:07:45 +00:00
c2f68ca4da
Whittle down library tree context menus to be more contextual.
...
(From discussion on Zulip.)
2021-02-19 19:07:45 +00:00
48853d0c88
Eeschema: Allow auto-wiring / drawing from unconnected bus and graphic line endpoints
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7537
2021-02-19 17:15:27 +00:00
b43db7cd7d
Fix assert in Symbol Editor.
...
Also allows some symbol lib operations when we know the context even
if the library itself isn't selected. (For instance, select a symbol,
copy, paste.)
2021-02-18 18:08:37 +00:00
a25dfcd1b4
Allow "Update Symbol" command on power symbols
...
Power symbols can be modified in the library so it is useful to allow
them to be updated with the right-click menu
2021-02-17 15:31:22 -08:00
2c4d53d994
Minor cleanup.
2021-02-16 21:11:36 +00:00
2a7e60960a
Use standard mirror icons & terminology.
...
Also use standard group icons.
Also put both (and rotate commands) in toolbar.
Fixes https://gitlab.com/kicad/code/kicad/issues/7504
2021-02-16 21:11:36 +00:00
24795f5b12
Fix overzealous breakSegments()
...
We cannot break segements that are merely close or on endpoints, so we
filter these prior to the break routine. Failing to do this was
overloading our undo stack with bogus values
Fixes https://gitlab.com/kicad/code/kicad/issues/7553
Fixes https://gitlab.com/kicad/code/kicad/issues/7557
Fixes https://gitlab.com/kicad/code/kicad/issues/7554
2021-02-16 10:12:30 -08:00
d93ba0a06a
Choose half-grid for mirror
...
Using the half-grid allows for odd-grid counts to remain on-grid,
closer to the actual center.
Fixes https://gitlab.com/kicad/code/kicad/issues/7493
2021-02-15 11:59:04 -08:00
55e34592a6
Fix expand selection option in Eeschema
2021-02-15 10:53:17 -08:00
9205f1571d
EE_SELECTION_TOOL correctly identifies buses and wires for auto starting
2021-02-15 14:57:06 +00:00
cf42d692bf
Remove some dead code. A little bit of comment cleanup as well.
2021-02-15 14:13:43 +00:00
ec20121114
Make sure schematic symbol fields get transferred to symbol editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7501
2021-02-14 18:30:14 +00:00
0f463ee84b
Add Update Symbol Fields dialog for derived symbols.
...
ADDED This allows one to update a derived symbol's fields from the
parent symbol.
Fixes https://gitlab.com/kicad/code/kicad/issues/7168
2021-02-14 12:15:26 +00:00
02c7fcdc84
Fix BreakWire tool
...
Adds ability to start new commit to eeschema, allowing all
AddItemsToUndoList to always append without foreknowledge. Keeps newly
split wires on the tool until placed
Fixes https://gitlab.com/kicad/code/kicad/issues/7512
2021-02-12 17:17:12 -08:00
1bec10b6fa
Make it easy to select small things overlapping symbols
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7487
2021-02-11 12:13:46 -05:00
a0b9b0c3ee
Improve IsSymbolEditable to differentiate fields.
...
Fields are editable in Aliases, but still not in Legacy libraries,
locked libraries, etc.
Fixes https://gitlab.com/kicad/code/kicad/issues/7175
2021-02-10 22:57:23 +00:00
1dc0ef01b3
Fix automatic wire tool in gridless mode
...
The automatic wire tool was not working in the gridless mode because the
grid snapping on/off logic present in `EE_GRID_HELPER`, based on the
value of `m_enableGrid`, was not taking into account that another check,
but for the global KiCad setting, would be performed in the `Align()`
method, which is inherited from `GRID_HELPER`.
I've modified all tests of `m_enableGrid` value to also take the global
setting into account, and moved checks for it to `Align()` method, as
it's more consistent this way.
I've also removed an override of the `Align()` method in the
`PCB_GRID_HELPER` class, as it was made redundant by my changes.
Fixes https://gitlab.com/kicad/code/kicad/issues/7402
2021-02-10 22:07:49 +00:00
67ccee338e
Give cleanup to the move tool
...
For unknown reasons, the move tool was not clearing the stack when
called from the edit tool. This moves the call to move tool to after
clearing the edit tool from the stack. The move tool handles cleanup,
so we skip the original reason for waiting on the move tool before
finalizing the edit tool routines
Fixes https://gitlab.com/kicad/code/kicad/issues/7481
2021-02-10 10:01:05 -08:00
a30ae6a237
Pass un-pretty-printed bus names through menu help text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7412
2021-02-10 15:03:06 +00:00
356c2d3508
Symbol editor: fix symbol save as menu enable logic issue.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7451
2021-02-07 18:21:59 -05:00
d70cebcd62
Allow clicking on terminal point to finish a bus unfold.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7413
2021-02-07 00:31:00 +00:00
db66cd50d7
Use Save As icon for Save As action in symbol editor
2021-02-06 22:51:56 +00:00
c2dbd28101
Simplify and harmonize symbol editor and footprint editor menus.
...
Some differences are due to difference between libraries being files
in symbol editor and directories in footprint editor, but this unifies
most of the rest.
It also dispenses with the save-to-library vs save-to-document distinction
in the GUI because it makes for too much variability in the GUI, was
implemented differently between the two editors, and isn't needed as much
anymore now that we have the highly visible infobar.
There was also an issue that the save-to-board icon occupies the same
location and has the same size/shape/colours as the Board Setup icon in
PCBNew.
Fixes https://gitlab.com/kicad/code/kicad/issues/7215
2021-02-06 14:33:16 +00:00
2aa8a3724f
Don't continue until the move tool completes
...
Starting a new action (to add junctions) will break the move tool loop
and cancel placement. We need to wait until the tool completes before
choosing where to place the junctions
Fixes https://gitlab.com/kicad/code/kicad/issues/7421
2021-02-05 10:18:34 -08:00
b4a9792e23
Add a warning for hidden power pins.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6440
2021-02-04 22:47:37 +00:00
62254309b0
Don't rotate fields if their parent is selected.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7410
2021-02-04 00:05:13 +00:00
b07c8110c8
Follow grid snapping when moving
2021-02-02 20:23:12 -08:00
238aa2b5b0
Snap to eeschema lines
...
Allows easier snapping to lines when drawing in eeschema.
Fixes https://gitlab.com/kicad/code/kicad/issues/7378
2021-02-02 19:33:18 -08:00
ea08f1b8cb
Update action short names for clarity
2021-02-02 19:33:18 -08:00
147c839857
Allow drag-select of fields.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6662
2021-02-01 17:14:30 +00:00
ae5d2efe07
Snap common single-click tools
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7362
Fixes https://gitlab.com/kicad/code/kicad/issues/7363
2021-01-31 15:17:24 -08:00
08a932a969
Add smarts to switch selection on right-click
...
Now looks at how hard it is to select the item (grids) and switches only
if the mouse is more than a grid square away and there is a new item
under the mouse.
Fixes https://gitlab.com/kicad/code/kicad/issues/4455
2021-01-31 07:00:48 -08:00
abf0a46dce
Refactor PICKER_TOOL and push up snapping disable functionality
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7348
2021-01-31 09:50:41 -05:00
7737489e57
Symbol editor: don't allow new or imported symbols in read only libraries.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7334
2021-01-30 13:03:05 -05:00
41234a8373
Implement more precise annotation-required messages.
...
Also moves the message to an infobar so it's more noticeable.
Fixes https://gitlab.com/kicad/code/kicad/issues/7332
2021-01-30 16:31:27 +00:00
1d12f3fe4a
Fix logic in selecting power symbols for net highlighting
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7339
2021-01-30 10:28:26 -05:00
b64611af7a
Make highlight net flexible with grid
2021-01-29 14:28:26 -08:00
ea6dc0d730
Make auto-wire use snapping behavior
...
Forcing grid snap for the kick-start behavior loses snaps to pins that
may be desired. This also adds force-snapping in select mode to match
the user's auto-start preferences
Fixes https://gitlab.com/kicad/code/kicad/issues/7293
2021-01-29 14:09:33 -08:00
02954dfaa1
Fix another instance of modifying iterators
...
We cannot modify the ee_rtree while iterating over it without
invalidating the iterators
Fixes https://gitlab.com/kicad/code/kicad/issues/7331
2021-01-29 08:33:44 -08:00
ff7742c6b8
File naming and include cleanup.
2021-01-28 11:35:18 +00:00
7d6a749285
Implement a more aggressive re-entrancy check for SCH drawing tools.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7259
2021-01-27 19:51:11 +00:00
f3047829e5
Mark document dirty after drag; don't wait for point editor deactivation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7285
2021-01-26 19:01:31 +00:00
1598e870b6
Insert the same unit on all sheet instances when adding a symbol
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5898 (C)
2021-01-26 18:12:49 +00:00
2e21489acf
Copy unit numbers to symbol instances when pasting sheets
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5898 (B)
2021-01-26 18:12:49 +00:00
4bcd56b1f6
Always include unit number when copying to clipboard
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5898 (A)
2021-01-26 18:12:49 +00:00
4619d5e112
Fix more broken Doxygen comment specifiers.
2021-01-26 12:17:52 -05:00
b576ccef61
Don't double-up tools on tool stack.
...
Also make sure move tool gets cancelled by other tools being
activated.
Fixes https://gitlab.com/kicad/code/kicad/issues/7259
2021-01-26 10:56:19 +00:00
f6b7817044
Init intersheet refs props when converting to global label.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7252
2021-01-25 13:20:16 +00:00
8ad448cbbc
Don't leave point editor running when moving things in eeschema
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7227
2021-01-24 12:59:42 -05:00
df2d0962c6
Drop hover selection in Symbol Editor after edit action.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7234
2021-01-23 17:12:34 +00:00
d770284fa2
Add a bus instead of a wire for bus junctions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7231
2021-01-23 17:04:44 +00:00
4f0accb714
Allow only updating reference links during back-annotation
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7190
2021-01-20 00:37:38 +00:00
360953ba98
"comp" -> "symbol".
2021-01-19 23:50:40 +00:00
d32c12b4b9
Banish new project from template to the menubar
...
+ remove inappropriate icon from Eeschema ctx menu
2021-01-19 22:57:25 +00:00
80dbc24326
Icons: remove superfluous icon
...
Remove icons where menu text gives context
2021-01-19 22:57:25 +00:00
351074cc48
Better-encapsulate collector sources in the selection tool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7191
2021-01-19 21:10:43 +00:00
4da28cf8f4
Fix bad dereference
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7188
2021-01-19 08:39:22 -08:00
2c9da4daa4
Make sure Check Pins works on a flattened copy of the part.
...
Also improved the reporting slightly (in particular for pins with
no names or pins with the empty flag ("~").
Fixes https://gitlab.com/kicad/code/kicad/issues/7165
2021-01-18 15:20:15 +00:00
479487ceb1
Tidy up context menus a bit
...
Try and put the common actions in the same places
2021-01-17 22:42:03 +00:00
e10025db64
Hierarchy navigation: keep the last used zoom level in a sheet when go back to this sheet.
...
Fixes #7107
https://gitlab.com/kicad/code/kicad/issues/7107
2021-01-17 09:41:49 +01:00
68efdb2fff
Push shared parts of GRID_HELPERs into common.
2021-01-16 23:18:10 +00:00
bae5825d1b
Fix copy/paste error.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7119
2021-01-15 13:14:47 +00:00
2d64613bbb
Coverity fixes.
...
Reports 314745, 316271, and 316269.
2021-01-13 11:23:09 -05:00
d23b5f89b3
Don't save sheet multiple times on undo stack.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7063
2021-01-12 23:56:35 +00:00
8fba0c257b
Icons: remove more inconsistencies around Select
...
Missed from 5d9b2d3fea
2021-01-11 23:31:24 +00:00
50889a9ed6
Promote mouse drag settings to full enums.
2021-01-11 22:09:36 +00:00
6c648df4c6
Support 3 drag vs. select options, and unifiy with other drag prefs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5493
2021-01-11 11:50:14 +00:00
0655f2c436
Symbol editor: do not disable tools and grey symbols from schematic.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6968
2021-01-08 18:25:18 -05:00
51e6846ca5
Don't edit fields when more than one is selected.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7005
2021-01-08 20:43:02 +00:00
54724096ea
Icons: consistency between Eeschema and Pcbnew
2021-01-06 00:35:20 +00:00
b40e3a39f5
Minor cleanup.
2021-01-04 23:59:36 +00:00
dc65166ee7
Implement algin-to-grid for fields.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6530
2021-01-03 22:39:58 +00:00
154e19b6e7
Icons: use common prefix for small 16x16
2021-01-02 23:16:33 +00:00
6d3c1c7716
Icons: remove unused sources/duplicates + rename
2021-01-02 23:16:33 +00:00
a69a4be853
Fix build error with icon names
2021-01-01 13:13:33 -08:00
5a0c3bf4bc
Icons updates
...
- Remove 22px bitmaps
- Move 24px icons to icon_XXX_24 filenames
- Update convert icon thanks to MisterHW
Fixes https://gitlab.com/kicad/code/kicad/issues/6088
2021-01-01 11:00:15 -08:00
db0f3b42b4
Stop the cursor from reverting away from the window select in eeschema
...
Fix #6590
2020-12-29 19:51:34 -05:00
157ceedc12
Fix offset of repeated pin in Symbol Editor
2020-12-29 18:32:46 +00:00
77f651639d
Eeschema: fix crash using tune/probe function in spice simulator.
...
Fixes #6875
https://gitlab.com/kicad/code/kicad/issues/6875
2020-12-29 13:13:58 +01:00
ac1f7f93a2
Save context menu position for bus unfold
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6378
2020-12-27 13:07:16 -05:00
5069d20768
Symbol editor: make library and symbol save as operations explicit.
...
Prior to this change the "Save As.." command would take a different action
based on the state of the editor which could be confusing. There are now
separate commands for saving the currently selected library or symbol.
CHANGED: The implicit save as menu entry which would save the currently
selected library if no symbol was selected or the current symbol to a
different library. There are now separate save as commands for libraries
and symbols to make it obvious what is being saved.
2020-12-27 11:55:32 -05:00
c16dda4027
Make sure added wires (from junctions) don't get left selected.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6852
2020-12-27 13:17:03 +00:00
c0e5e8eeee
Formatting.
2020-12-27 13:17:03 +00:00
8a720ef305
Update naming.
2020-12-25 23:37:01 +00:00
eb1f07bade
Icons: standardise `export_png` to match set
2020-12-24 01:02:03 +00:00
d2018b122b
Icons: unify export_svg with the rest of the set
2020-12-24 01:02:02 +00:00
3a3ef19ccb
When rotating during a drag/move, only rotate user-selected items.
...
In particular, don't rotate wires that had to be picked up; just
keep them connected.
Fixes https://gitlab.com/kicad/code/kicad/issues/6789
2020-12-23 14:24:35 +00:00
fb7ac450d9
Read-only dialogs for symbols in legacy libraries.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5211
2020-12-22 12:16:27 +00:00
f311831c27
Coverity fixes.
...
280252, 314742, 314745, 314747, 314755, 314756, 314757, 314758,
314935, 314936
2020-12-20 13:24:47 -05:00
9b0a137d6c
Stop bludgeoncompiling dialog_page_settings
...
Through the power of OOP!
Needs some more cleanup though
2020-12-19 10:40:37 -05:00
489db6adde
Handle case where multiple pins are moved
...
When synchronized, if multiple pins are selected to be moved, we need to
match each to a matching pin in the new unit
Fixes https://gitlab.com/kicad/code/kicad/issues/2589
2020-12-18 15:48:34 -08:00
0fd920a94c
Modify Synchronize Pins behavior
...
Consider a pin synchronized iff the names and electrical types match in
addition to the position, orientation and demorgan variant.
Also, only modify one matching pin per unit. This prevents
moving/editing a full stack of pins on the same unit when synchonized.
Fixes https://gitlab.com/kicad/code/kicad/issues/2590
2020-12-18 15:48:29 -08:00
b68b1692ec
Clean up some more user messages.
...
Mostly component -> symbol but also some I18N cleanup.
2020-12-18 12:49:20 +00:00
91ab540d18
Naming conventions.
2020-12-18 00:30:26 +00:00
c875efb635
Prevent modal deadlock by using QuasiModal mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6779
2020-12-18 00:30:26 +00:00
bb232e6ac6
Unify LIB_IDs now that both are stored in sexpr files.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6764
2020-12-18 00:30:26 +00:00
a6085fa88d
Consistency for gerbview toolbar icons and some other icon tweaks.
2020-12-17 14:02:23 +00:00
fc20eaa083
Fix some compiler and Coverity warnings
2020-12-17 00:30:22 +00:00
dad2e317e9
Modify edit text & graphics to use pencil
2020-12-14 17:03:35 -08:00
22a6b36257
Don't allow dbl-click to leak through to other tools.
...
This only applies if the tool doesn't handle properties (which also
handles double-click events).
Fixes https://gitlab.com/kicad/code/kicad/issues/6735
2020-12-14 22:15:43 +00:00
07bb2729f8
Clean up over-use of auto.
2020-12-14 22:15:43 +00:00
126d40f9d3
"Sheet label" too confusing w/ sheet names and fields. Use "sheet pin".
2020-12-13 22:43:09 +00:00
5b22cef984
Associate -> assign in the context of footprint assignments.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6708
2020-12-13 13:41:25 +00:00
93d55e3d23
Tweak no-connect and label icons
2020-12-12 11:26:30 -05:00
b6e267b78d
Naming conventions.
2020-12-12 03:43:41 +00:00
cf6f0b9b92
Use trash icon where appropriate
2020-12-11 17:05:11 -08:00
412c9c8c4e
Save should be disabled only if the file is up-to-date.
...
Any other issues (such as locked files) need to produce a dialog
with info for the user.
2020-12-11 23:58:30 +00:00
e667d26854
Eeschema: use "board editor" instead of "PcbNew" in UI strings.
2020-12-11 15:24:42 -05:00
4516aff43e
Symbol Editor: don't show edit page number in context menu.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6711
2020-12-11 15:02:34 -05:00
5d028b82ed
Eeschema: tool tip improvements.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6708
2020-12-11 13:42:50 -05:00
dd4298bb94
Coverity fixes: 280374, 313611, 313648, 313649, and 314720.
2020-12-11 13:29:52 -05:00
224697d0b3
Sheet navigator tooltip.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6680
2020-12-11 16:43:55 +00:00
4f90c03c7d
Allow snapItem to be re-activated.
...
Don't clear until another snapPoint is chosen. This allows line
snapping to re-appear when they move back in range.
Fixes https://gitlab.com/kicad/code/kicad/issues/5973
2020-12-05 23:57:33 +00:00
a3406e7514
Make snapping more predictable.
...
In particular, allow grid positions to override line snapping if
they're a better match (and do this independently on x and y axes).
We already allow a nearer anchor to override, but that should be
based on a cartesian distance rather than independent axes.
Fixes https://gitlab.com/kicad/code/kicad/issues/6626
2020-12-04 22:50:30 +00:00
c47871e775
EDA_BASE_FRAME::ShowInfoBarMsg: add option to show a close button.
...
Same for EDA_BASE_FRAME::ShowInfoBarError and EDA_BASE_FRAME::ShowInfoBarWarning
2020-12-04 14:45:14 +01:00
821128cb8e
Eeschema: Make auto-decrementing net labels stop at zero
...
CHANGED: If you set the auto-increment value to a negative number,
created a net label and hit the insert key, when the name got below zero,
the net labels tried to go negative but created bad labels instead.
Now the code caps decrementing at zero, warns users when it has
happened, and explains why.
Fixes https://gitlab.com/kicad/code/kicad/issues/6537
2020-12-04 12:48:32 +00:00
e882753ebf
Grid snapping fixes.
...
1) Uniformly honour the GAL grid snap settings
2) Make more uniform use of GRID_HELPERs
3) Smarten EDIT_LINE for mid-point snapping
Fixes https://gitlab.com/kicad/code/kicad/issues/6558
2020-12-03 19:55:58 +00:00
a19028a396
Hook up EE_GRID_HELPER to some more tools.
...
Also implements EE_GRID_HELPER layers so that connectable things
snap to connectable things and graphics snap to graphics.
Fixes https://gitlab.com/kicad/code/kicad/issues/5641
2020-12-03 15:16:34 +00:00
43fe228367
Hook up a bit more of the EE_GRID_HELPER.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5985
2020-12-02 23:18:33 +00:00
05609dbc1d
Update screen r-tree after mirror operation
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6549
2020-12-01 19:19:12 -05:00
df262eaa06
Make prev/next marker work reliably on all platforms.
...
Requires us to move from arrow-keys to our own commands (the only
way that the OSX wxWidgets impl doesn't eat the keys when the dataVIew
has focus).
While there we might as well add a command to exlucde markers.
ADDED Prev Marker, Next Marker, Exclude Marker
Fixes https://gitlab.com/kicad/code/kicad/issues/6575
Fixes https://gitlab.com/kicad/code/kicad/issues/5501
2020-12-01 22:37:07 +00:00
3c521942ed
Smarten isEmpty checks to include nothing-but-whitespace.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6567
2020-12-01 16:39:06 +00:00
3ad5bce67f
Rewrite connected-lines dragger to not use EDA_ITEM flags.
...
We had some spurious bugs where both ends would get dragged to a
single point (making them disappear). While I never caught it
in the debugger, I'm guessing that the flags weren't getting
cleared properly or were getting overwritten or something. Anyway,
it now uses std::pair instead.
Fixes https://gitlab.com/kicad/code/kicad/issues/6550
Fixes https://gitlab.com/kicad/code/kicad/issues/6431
2020-11-30 19:30:03 +00:00
9380d6f533
eeschema page numbers: match ordering in hierarchy navigator to sheet page number ordering
...
- update hierarchy navigator after any modifications to the SCH_EDIT_FRAME
- do not generate ghost selection events after updating hierarchy tree
- use Human Readable path in SCH_EDIT_TOOL::EditPageNumber
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5760
2020-11-30 16:49:33 +00:00
3da0ab1a9a
Fix a couple of bugs in intersheet references.
...
1) init reference pages before trying to draw the SCH_FIELDs when
turning intersheet references on
2) don't double redraw because we accidentally cleared the last
hover item on a non-mouse-moved event.
3) make sure the root sheet gets a name for the hypertext menu.
2020-11-29 16:53:18 +00:00
13c63e3a50
Clearer warning about not back-annotating footprint deletes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6521
2020-11-26 19:30:16 +00:00
c85ef8eb69
Make updating netnames in backannotate more discrete.
...
Trying to be too smart was producing unexpected results.
Fixes https://gitlab.com/kicad/code/kicad/issues/6480
2020-11-25 22:16:56 +00:00
d50d728d19
Cleanup compiler warnings
2020-11-25 00:08:09 +00:00
71ce00c5ce
Allow rotation of a single graphic line.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6487
2020-11-24 23:40:53 +00:00
9c7c05c161
Mostly formatting cleanup but a few type-casting cleanups too.
2020-11-24 22:16:41 +00:00
78b505f36a
Count head and tail lists as well.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6461
2020-11-23 23:54:54 +00:00
e91a5b3f81
Symbol editor: prevent derived symbol elements from being moved.
2020-11-23 15:46:03 -05:00
dd60fd47b2
Cleanup and formatting.
2020-11-23 01:10:08 +00:00
3a4bd6fb8b
Fix uninitialized variable.
2020-11-21 20:57:36 +00:00
1391774f64
Re-factor boundary/courtyard checker error handling.
...
ADDED Footprint Checker dialog to display the results in.
Fixes https://gitlab.com/kicad/code/kicad/issues/6446
2020-11-21 20:57:35 +00:00
01b6cd08b5
lib_edit_tool.cpp: fix a wxWidgets 3.0.4 compatibility.
2020-11-21 11:56:32 +01:00
64636601b8
Eeschema: fix a Unicode/UTF8 management when pasting items from Clipboard.
...
Copy to clipboard save items (using S expr description) using wide strings
(not UTF8 encoding).
But Paste from clipboard was not converting the wide string to UTF8 string
when getting the stored data to send it as std::string to the S expr reader.
Fixes #6449
https://gitlab.com/kicad/code/kicad/issues/6449
2020-11-21 10:59:25 +01:00
9e9946628a
Go back to arrow cursor on a cancel (or finish).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6421
2020-11-19 20:09:28 +00:00
99796d359f
Honour include-in-board flag when back-annotating.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6438
2020-11-19 15:29:53 +00:00
7c344e9be6
Mirroring for intersheet references.
2020-11-18 23:34:27 +00:00
293795fd46
Support rotation on intersheet references.
2020-11-18 23:34:27 +00:00
0e44f5128c
Add const specifiers
2020-11-18 19:50:36 +00:00
cb5ec8bce1
Make Eeschema cursors update without waiting for mouse movement.
2020-11-18 17:32:40 +00:00
bd1f262a6b
Fix issues with Intersheet Ref highlighting and hover actions.
2020-11-18 17:32:40 +00:00
a4201ea833
Fix crash in libedit
...
LIB_ITEM is not derived from SCH_ITEM but they share a selection model
2020-11-17 14:28:56 -08:00
8c5c902fa3
Re-write IntersheetRefs on top of SCH_FIELDs and textVars.
...
1) Generalize SCH_ITEM owners (SCH_COMPONENT, SCH_SHEET, and now
SCH_GLOBALLABEL)
2) Generalize hypertext items
3) Use SCH_FIELD autoplace infrastructure for placing intersheet
references
4) Use textVar infrastructure for buildin intersheet references.
As an important side-effect this also fixes the undo issues with
intersheet refs.
2020-11-17 16:05:49 +00:00
a207bd97bb
Naming conventions.
2020-11-17 16:05:49 +00:00
6e6e0aa644
Naming conventions (including some component -> symbol).
2020-11-15 20:23:15 +00:00
6654c03041
Embarking on the next adventure: component -> symbol.
2020-11-15 20:23:15 +00:00
bdbb68f813
MODULE -> FOOTPRINT.
2020-11-13 16:04:03 +00:00
63a54d003e
More module -> footprint.
2020-11-13 15:16:24 +00:00
522d64968e
Yet more module -> footprint.
2020-11-13 15:16:24 +00:00
f0d0e17aab
Prepare for MODULE -> FOOTPRINT.
2020-11-13 15:16:24 +00:00
4889f9bb7c
Fix typo in net label orientation calculation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6333
2020-11-09 12:07:40 +00:00
bfd8a62852
Formatting and naming conventions.
2020-11-07 18:50:30 +00:00
91ba002da7
Make sure move machinery gets initialized if we're going to use it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6293
2020-11-06 12:21:31 +00:00
ae4614bfbd
Symbol editor: do not allow paste into derived symbols.
...
Don't allow select all, copy, cut, paste, or duplicate if the current
symbol is an alias.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6050
2020-11-04 15:00:09 -05:00
88abcc1287
Fix broken handling of closing ERC dialog.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6277
2020-11-04 01:08:21 +00:00
5507575d64
Move ERC dialog to EE_INSPECTION_TOOL and kill when resetting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6111
2020-11-03 20:27:44 +00:00
4be6a27a39
Report error when pin for backannotate can't be found.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6263
2020-11-03 18:53:14 +00:00
2a8ea25209
Null pointer safety.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6263
2020-11-03 15:47:38 +00:00
bd103c133d
Don't save junction colours when they're inherited.
...
Also fixes Edit Text & Graphics Properties to be able to clear
colours from junctions.
Fixes https://gitlab.com/kicad/code/kicad/issues/6018
2020-11-03 14:07:50 +00:00
92d6988f10
Keep pin positions stable when resizing sheet.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6196
2020-10-31 11:49:07 +00:00
bddc97df30
LibEdit -> SymbolEditor
2020-10-31 10:28:21 +00:00
0d8789935d
Refactoring. Push editing code to toolset.
2020-10-31 10:28:21 +00:00
de013ee60a
Selection center is center of visible items.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6188
2020-10-30 23:37:35 +00:00
9065908859
Update SCH_SCREEN's RTree when moving items.
...
Or when modifying geometric shape/properties.
Fixes https://gitlab.com/kicad/code/kicad/issues/5922
2020-10-30 15:26:07 +00:00
45618327cf
Fix crash bug closing schematic with sheet selected.
2020-10-30 15:26:07 +00:00
1d110d5414
Move a couple more dialogs to QuasiModal for syntax help.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5897
2020-10-29 22:55:33 +00:00
c9d7bdc340
Hook up AutoplaceFields for sheets.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6197
2020-10-28 22:32:36 +00:00
c5a86126d2
Be more clever about making sheet names unique.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6123
2020-10-23 23:55:45 +01:00
d785dae88b
DIALOG_EDIT_COMPONENT_IN_LIB -> DIALOG_LIB_SYMBOL_PROPERTIES.
2020-10-22 10:41:21 +01:00
b39fb3374d
Fix fat fingered error
2020-10-21 14:41:14 -07:00
69d47c90ea
Unify sentences in translation
2020-10-21 12:31:21 -07:00
176f461b2c
Fix a corner case of wire merging.
...
We want to look for a junction before merging two touching colinear
segments, but the old code would also check for a junction when
merging two overlapping segments, which is not what you want.
Fixes https://gitlab.com/kicad/code/kicad/issues/5960
2020-10-21 18:51:47 +01:00
f8a4edb1c9
First pass renaming module to footprint
...
This is mostly in comments and the few remainin text strings that
reference module
2020-10-20 20:49:11 -07:00
e5089d783d
Remove multi-label entry feature.
...
It was causing problems with surprising behaviour and issues with
allowing spaces in existing labels. We'll work on something better
for 7.0....
Fixes https://gitlab.com/kicad/code/kicad/issues/6073
2020-10-20 22:53:44 +01:00
83890f8d3a
Move label editors to QuasiModal so the Syntax Help window can be shown.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5437
2020-10-20 22:26:47 +01:00
4085757aeb
Remove beginning/ending spaces in translations
...
Adding space padding makes translations more difficult by increasing
string counts
2020-10-20 12:08:04 -07:00
8ff51d8899
Eeschema: add schematic sheet page number.
...
The groundwork has now been laid for per sheet instance data. Initially
this only supports sheet page numbers but could be expanded to include
other per sheet instance information.
ADDED: Support for user defined schematic page numbers.
2020-10-19 14:05:45 -04:00
6ce803b77c
Push/pop move tool even when there's nothing to move.
...
This keeps other tools from having the special-case an empty move.
Fixes https://gitlab.com/kicad/code/kicad/issues/6048
2020-10-18 12:08:15 +01:00
6dfcfb0177
Rename DIALOG_EDIT_COMPONENT_IN_SCHEMATIC -> DIALOG_SYMBOL_PROPERTIES
2020-10-18 00:26:37 +01:00
a2c3bdec0d
Remove kicad_string.h from netlist_exporter.h
2020-10-15 18:48:53 -04:00
128910c602
Pass unhandled command events from Symbol Editor move tool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6015
2020-10-15 18:43:23 +01:00
5f4b0eb0fb
Fix formatting and overzealous renaming for FILL_TYPE
2020-10-15 11:24:49 +01:00
1538d737e7
Split out FILL_T to its own header to avoid spreading eda_item everywhere
2020-10-14 21:51:23 -04:00
5302f7ce73
Remove kicad_string.h from eda_text.h
2020-10-14 19:18:38 -04:00
90da5fccbd
Disambiguate backannotation (Update Schematic from PCB) from Cvpcb.
2020-10-14 21:07:10 +01:00
12d21e34e2
Remove trigo.h from eda_text.h
2020-10-13 23:37:48 -04:00
b2e9f6987d
Split base_struct into eda_item and eda_rect
2020-10-13 21:24:50 -04:00
2c86363aa0
Relocate the page_layout includes to a page_layout folder
2020-10-13 20:33:33 -04:00
d1bdfb7253
Clear selection before adding new lines in immediate mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4266
2020-10-13 19:16:48 -04:00
fd874d8345
Check to see if isolating junction is part of the drag or not.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5960
2020-10-13 13:52:49 +01:00
5f6d309d36
Eeschema: REMOVED "Update from Symbol Library"
...
This is effectively duplicated by "Update Symbol(s) from Library".
Fixes https://gitlab.com/kicad/code/kicad/issues/5217
2020-10-12 22:44:53 +00:00
8930e48cf3
Cleanup dead code
...
Remove leftovers from e4bc1eb3bf
2020-10-12 22:44:53 +00:00
c40483d18a
Cleanup: Move KiCad files into plugins folder
2020-10-12 16:36:08 +00:00
0efe073dec
Add wires between selected wires and unselected junctions when dragging.
...
Also fixes a bug where the auto-start-wire stuff was messing up the seleciton
when the selection tool wasn't at the top of the tool stack.
Fixes https://gitlab.com/kicad/code/kicad/issues/5960
2020-10-12 11:46:08 +01:00
03074ae6ed
Kick the selection tool to activate (and thus update cursors) on exiting some picker tools
2020-10-11 13:12:29 -04:00
91db6a770c
Eeschema: Add missing tooltips to left toolbar buttons
...
CHANGED: The button in the left toolbar for hiding/showing hidden
pins, and the button for forcing/relaxing H&V only wire mode had
no tooltips. This MR adds them.
2020-10-11 13:55:36 +00:00
558f4b4b51
Add new place cursor, fix cursor hotpoints again
2020-10-10 23:45:21 -04:00
310786333d
Add missing cursors for bus, graphic lines, and hier labels
...
Fix #5949
2020-10-10 18:25:44 -04:00
5aa796b5fe
Cleanup compiler warnings
2020-10-10 15:24:35 +01:00
fc93a04751
eeschema: iref: use GetParentLabel instead of GetParent
2020-10-09 02:37:51 +00:00
bd30a4a406
Add selection lasso and window cursors
2020-10-08 21:25:21 -04:00
f238d05ead
Add COMPONENT cursor
2020-10-08 20:52:58 -04:00
6cf4016a64
Add net and global label cursors
2020-10-08 20:52:58 -04:00
fd22fe8e37
Show preview item in drawing tool before mouse is moved.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5922
2020-10-08 19:56:09 +01:00
4095edda07
Add Properties support to Junction and Bus Entry tools.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5907
2020-10-08 18:11:06 +01:00
2b839c6c9c
Ensure command events are passed when placing junctions
...
We only handle specific command events in the handler, so we
must pass the rest to allow other tools to work.
Fixes https://gitlab.com/kicad/code/kicad/issues/5922
2020-10-08 17:58:06 +01:00
7e974e5ccc
Use the snapped cursor position used for detection for the wire tool autostart
...
Fixes #5902
2020-10-07 23:57:26 -04:00
f5e0754f65
Use the setCursor lambda pattern and fix up the initial cursor states
2020-10-07 23:26:14 -04:00
d9485129c8
Implement more context specific cursors using both stock and custom cursors.
2020-10-08 00:50:28 +00:00
809f4c2ffb
Finish single-click-place drawing tool on double-click.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5907
2020-10-07 18:30:55 +01:00
4565631728
Finish moving eeschema assigned netclasses to sheet-path-relative.
...
Also adds code for the case where a new label is created on a net
with an existing netclass assignment.
Fixes https://gitlab.com/kicad/code/kicad/issues/5886
2020-10-07 16:31:55 +01:00
63a0f537d8
Performance enhancement: check hierarchy validity only when necessary.
2020-10-05 13:49:29 +01:00
c9096c7168
Re-enable selection of intersheet references.
...
Un-modified roll-overs and clicks still produce hypertext action, but
modified clicks and drag-selects will select.
2020-10-05 11:55:33 +01:00
44580acee2
Clean up some compiler warnings.
2020-10-03 22:55:34 +01:00
676f3221cc
Fix symbol editor glitches due to autostart trying to start
2020-10-03 15:47:08 -04:00
0b2b8b150d
Use the event position always instead of the view cursor position
...
Fix #5850
2020-10-03 15:20:32 -04:00
bda275de46
more cleanup about removing useless include
2020-10-03 11:48:16 +02:00
b0ffbcaba1
Fix #5850
2020-10-03 02:10:56 +00:00
cc617b715f
Implement hypertext links for intersheet references.
2020-10-02 21:18:34 +01:00
c1b34b02b5
Disallow selection of intersheet references.
2020-10-02 13:50:16 +01:00
c940a45937
ADDED: Autostart wires in eeschema
...
Allows wires to be automatically started by clicking over a connection point
2020-10-01 23:53:47 +00:00
71ed7ee707
Revert "Drag preselected items even when "prefer selection to dragging" enabled"
...
This reverts commit d530e2c2cd
2020-10-01 18:23:30 -04:00
2fc49045d1
ADDED: eeschema: Add intersheets references function
...
Add a new function to place intersheets references next to
global labels.
2020-10-01 20:39:32 +00:00
d530e2c2cd
Drag preselected items even when "prefer selection to dragging" enabled
...
Not being able to drag an already-selected item feels broken
2020-09-30 20:10:13 -07:00
b0e05ad9bf
Eeschema: Check for NULL pointer when using interactive delete tool
...
CHANGED: If you start the interactive delete tool and the mouse pointer
isn't near anything, Eeschema tries to use a null EDA_ITEM pointer
which throws an exception. This commit checks if the pointer is null
and exits if it is.
2020-09-30 23:05:29 +00:00
2c49c406a0
Remove ignore other projects option from back annotation
...
The new schematic format makes this option unneeded, and it isn't
used at all in the backannotation code - so it doesn't need to be
in the UI.
2020-09-30 23:34:04 +01:00
e4bc1eb3bf
Fold Update Fields from Library into Update Symbol.
...
Also gives Change Symbol control over which fields to update.
Fixes https://gitlab.com/kicad/code/kicad/issues/5217
2020-09-27 14:09:11 +01:00
e77b7e3360
Make MMB double click perform 'Zoom to Fit'
...
ADDED: Make middle mouse button double click do a 'Zoom to Fit'
in Eeschema, Pcbnew, and Gerbview. Ctrl-MMB does a 'Zoom to Objects'
in Eeschema.
Fixes https://gitlab.com/kicad/code/kicad/issues/1988
2020-09-22 23:21:44 +00:00
fdbb28aea2
Treat Reference and Unit as separate words when searching.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4630
2020-09-20 18:57:33 +01:00
39bdc547af
Smarten up the guess selection routine to pick closest item.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5697
2020-09-19 15:55:27 +01:00
4fa3de2211
Ensure we clear forced position
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5699
2020-09-18 16:10:09 -07:00
d468618411
Don't eat commands that aren't ours in SCH_MOVE_TOOL.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5692
2020-09-18 16:45:41 +01:00
c8879d9034
Eeschema: Check if user wants to warp mouse to origin of moved object
...
CHANGED: When moving a footprint, Eeschema was always warping the mouse
when moving an item regardless of the state of the "Warp mouse to
origin of moved object" checkbox. This MR now honors the state of the
checkbox when moving schematic items.
NOTE: Issue 5279 originally only mentioned Pcbnew, but after the fix
for Pcbnew was submitted, a user pointed out it also happened in
Eeschema. Becuase of this, there are two MRs that "fix" the same issue.
Fixes https://gitlab.com/kicad/code/kicad/issues/5279
2020-09-18 02:49:59 +00:00
471f81742f
ADDED: Align to Grid function in Eeschema
...
Adds tool option to align selected elements to the current grid.
Fixes https://gitlab.com/kicad/code/kicad/issues/5481
2020-09-17 12:27:43 -07:00
67a7aa8ba4
Make snapping size grid-dependent
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5638
Fixes https://gitlab.com/kicad/code/kicad/issues/5588
2020-09-15 12:07:34 -07:00
1703657fb5
Decrease default snap range
...
The snap range needs tuning to preference and monitor resolution. This
shifts the default range down for users until the customization bits are
implemented.
2020-09-12 08:34:21 -07:00
d14c6ba71f
Keep snap line alignment before new snaps
...
Also fixes the alignment line that was supposed to be dashed and not
solid.
2020-09-11 14:22:41 -07:00
23a9df8a59
ADDED: Allow Eeschema dragging graphical corners
...
This separates the two options (drag/move) into different actions. Drag
will drag all graphical lines connected. Move will disconnect the
graphical lines when moving.
2020-09-11 09:31:38 -07:00
f493e270ea
ADDED: Menu option to enable/disable snap to grid
...
You can now enable and disable snap to grid when drawing/editing across
all apps. You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
2020-09-10 20:09:30 -07:00
62433736bc
Snap Eeschema moves to nearest anchor
...
Fixes https://gitlab.com/kicad/code/kicad/issues/3803
2020-09-09 10:48:15 -07:00
4026904cc4
Make grid snapping depend on grid visibility
...
Turning the grid view on enables snapping to the grid. Turning it off
removes the snap and allows free draw
2020-09-09 10:18:15 -07:00
173b4ff588
Add snapping to eeschema
...
This generalizes both the SetPosition() function and ORIGIN_VIEWITEM
class away from the pcbnew-centric.
2020-09-09 10:18:15 -07:00
02a5d47de9
Avoid passing references in EESchema
...
This returns the connection list by value. This allows easier Python
use
Also renames m_End() to GetEnd()
2020-09-08 06:29:27 -07:00
7b05e456cc
Bug fixes for multiple symbol instances in complex hierarchies
...
1) use SCH_COMPONENT::GetRef(), GetValue() and GetFootprint() when
instance-specific info is needed
2) update UpdateAllScreenReferences() to handle value and footprint.
3) BACKANNO is CvPcb's handler, not back annotation's handler. Which
means it needs GUI behaviour, not back annotation behaviour.
Fixes https://gitlab.com/kicad/code/kicad/issues/5520
2020-09-06 13:57:14 +01:00
d5fd09249b
Save instance info on clipboard and reapply it when keeping annotations.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5522
2020-09-06 11:32:28 +01:00
be15053745
Allow back-annotation of differing values and footprints.
...
Also fixes a couple of bugs where resolving a textVar reference
to the refDes or unit wouldn't get the correct value in a
hierarchical schematic. (Unlogged.)
Fixes https://gitlab.com/kicad/code/kicad/issues/5397
2020-09-04 15:21:56 +00:00
04ba129881
Add specific icon for save symbol to schematic.
...
Also update CMakeLists.txt to prepare compatibility with Inkscape 1.0
However the command line to invoke Inkscape is still for 0.92 version
2020-09-03 10:00:44 +02:00
bd23d003d2
Bring Eeschema UI closer in line with Pcbnew for change terminology.
...
Also clears up the text & tooltip of the Remap Symbols function to
better explain why it's greyed out most of the time.
2020-09-02 15:21:51 +01:00
fa8138ee5a
Rework Symbol Props to Footprint Props design.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2286
Fixes https://gitlab.com/kicad/code/kicad/issues/5414
2020-09-02 15:21:51 +01:00
c9fa46ace8
Eeschema: allow symbols to be edited in place.
...
ADDED: Support to allow schematic symbols to be edited in place.
2020-09-01 07:28:20 -04:00
6e72f609f0
Make sure router and via tools update when sizes change.
...
Also adds a size menu to the context menu for the Via tool.
Fixes https://gitlab.com/kicad/code/kicad/issues/5321
2020-08-31 23:33:02 +01:00
88635ee5b6
Clean up error messages.
...
Convert a lot of nags to InfoBar errors/warnings/messages, and some
that never should have been exposed to wxFAIL_MSGs.
2020-08-31 14:19:57 +01:00
38a4e4ad5a
Remove the last bits of the old netlist system
2020-08-30 16:30:04 -04:00
cf17a675b4
Port simulator probing to new connectivity info
2020-08-30 16:05:16 -04:00
1bd7290309
Repair broken logic in ForceKeepAnnotations.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5382
2020-08-29 18:18:23 +01:00
1082402b33
Convert UNDO_REDO_T to an enum class
2020-08-26 18:04:32 +00:00
a97f2fb22a
Eeschema: cosmetic enhancement: add 2 missing icons
2020-08-26 13:00:46 +02:00
1138c32bf3
Don't pass Cancel event where there was a specific action cancelled.
...
For instance, if during a move the user hits ESC they only want the
move cancelled, not (for instance) the selection dropped.
Fixes https://gitlab.com/kicad/code/kicad/issues/5356
2020-08-25 12:54:40 +01:00
2f7094b352
Cleanup some unused variables
...
* Make the app progress indicator only have the indeterminate state
when the taskbar indicator is used (causes an uused variable warning
on wx<3.1)
* Remove unused dry run variable in pcb_netlist.h
* Remove unused forceDropAnnotations from the paste special dialog
since the dialog only controls keeping them.
2020-08-24 01:51:23 +01:00
97c34e2516
ADDED alternate pin definitions and assignments.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2002
2020-08-21 18:29:36 +01:00
7565a08396
eeschema: Add select all to schematic and library editor
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2497
2020-08-20 16:07:10 -07:00
ede39780e2
Remove all debugging output that cannot be disabled.
...
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.
There is still some debugging output in test code that really needs to
be moved into a unit test.
Add debugging output section to the coding policy regarding debugging
output.
2020-08-18 10:17:36 -04:00
1905a23ba1
libedit: fix double msg_panel refresh and use new move event
2020-08-18 13:11:48 +00:00
3674064b9e
Fix double msgpanel refresh and use the new moved event
2020-08-18 13:11:48 +00:00
3b05d7cddd
Move more frames to the new UI condition framework
...
* Frames moved: cvpcb, cvpcb footprints frame, gerbview, pagelayout editor
This also introduces new EDITOR_CONDITIONS that are used to set the
conditions of very common editor settings.
Also, some IDs were converted to tools in the pagelayout editor.
2020-08-16 19:10:25 +00:00
2b0b7a5153
Clear pin net-name-driving cache when changing annotation.
...
Also update connectivity after clear annotation, annotate or back
annotate.
Also update status bar for highlighted nets.
Fixes https://gitlab.com/kicad/code/kicad/issues/5170
2020-08-14 12:41:20 +01:00
0bb175a028
Eeschema: Add change and update symbol from library support.
...
ADDED: Add support to to Eeschema to change and update symbols from a
symbol library.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/4565
2020-08-13 13:53:49 -04:00
f4ab14f32d
Performance improvements for SchematicCleanup().
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4563
2020-08-10 12:41:52 +01:00
e910dc0092
Make sure lines/wires/busses get default widths if not spec'ed.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4854
2020-08-09 21:52:36 +01:00
5abc85aa80
Cleanup re-annotation code style
2020-08-09 12:43:05 -04:00
d08bf90576
ADDED: Geographic Reannotation
2020-08-09 12:43:05 -04:00
dcd02539e3
Remove linked-pin processing from LIB_PIN's setters.
...
It belongs in the tool layer (specifically LIB_PIN_TOOL).
2020-08-03 22:21:35 +01:00
5f3fd43b29
Fix uninitialized variable.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4948
2020-07-31 17:19:21 +01:00
f00c59c446
Fix a few Coverity warnings.
2020-07-29 09:26:57 +02:00
8a9fa53cd7
Clear annotations by default on copy/paste.
...
Folks didn't seem to like the "only clear when there are collisions"
behaviour. Paste Special remains available to "force keep".
Fixes https://gitlab.com/kicad/code/kicad/issues/4933
Fixes https://gitlab.com/kicad/code/kicad/issues/4744
2020-07-27 19:53:42 +01:00
7bdb98f961
libedit: Make context menu follow context
2020-07-26 20:16:38 +00:00
864087890b
Fix typo assuming new field value was always the name.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4936
2020-07-22 15:10:54 +01:00
ae45c08ce4
Fix label creation for new netname driven from a pin
...
LIB_PIN is never used in the connectivity calculation,
so it should use SCH_PIN instead. Additionally, the label
orientation should take into account the orientation of
the component to ensure they don't overlap.
2020-07-19 01:52:34 +01:00
944c9eac7c
Allow Update Schematic from PCB to re-link based on refdes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4306
2020-07-16 18:32:49 +01:00
11ca21039a
Clear new flag when creating image pins.
...
Otherwise if you then move it we'll think it needs to be inserted
and end up with a circular drawings list.
Fixes https://gitlab.com/kicad/code/kicad/issues/4622
2020-07-16 01:39:29 +01:00
e8079bf655
Make sure UI gets adjusted for Symbol property changes.
...
For instance, if the number of units is changed from 1 to not-1
or vice versa then we need to rebuild the units selector.
Fixes https://gitlab.com/kicad/code/kicad/issues/4622
2020-07-16 01:39:29 +01:00
7340c97ef9
Undo for schematic-wide operations.
...
Editing value/footprint fields of multi-unit components.
Find/Change.
Annotation.
Back annotation.
Fixes https://gitlab.com/kicad/code/kicad/issues/2122
Fixes https://gitlab.com/kicad/code/kicad/issues/4869
Fixes https://gitlab.com/kicad/code/kicad/issues/3933
Fixes https://gitlab.com/kicad/code/kicad/issues/4871
Fixes https://gitlab.com/kicad/code/kicad/issues/3899
2020-07-13 12:32:17 +01:00
9b92b275de
Remove vestiages of old open-PCB-for-settings hack.
...
We used to have to open a PCB_EDIT_FRAME to get the settings for
the footprint editor and footprint viewer. This necessitated some
special processing when opening a PCB_EDIT_FRAME to actually edit
a board as it might already be open but unloaded.
Since the new settings architecture allows the footprint editor and
footprint viewer to init themselves we no longer need the special-
case code.
2020-07-11 21:19:49 +01:00
e325d2e18f
Allow Net Inspector to create, rename and delete nets.
...
ADDED: create/edit/delete nets in PCBnew Net Inspector
ADDED: update from PCB now allows updating of changed nets
Fixes https://gitlab.com/kicad/code/kicad/issues/1996
2020-07-11 21:19:49 +01:00
4a5792cb87
Fix bus unfolding in the wake of bus entry changes
...
Since bus entry shape is not a thing anymore,
unfolding routine can be simplified to just use size
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4853
2020-07-09 18:51:42 -04:00
4c383c51fa
Eeschema: add update symbol from library command to context menu.
...
Rather than displaying dialog that has every update option possible like
updating footprints in the board editor, this change updates the library
symbol immediately using the symbol library identifier and requires no
additional input from the user.
ADDED: Context menu entry for schematic symbols to update the symbol from
the symbol library using the existing library identifier.
2020-07-08 10:15:24 -04:00
7cea4b23f1
ADDED: Expand selection in context menu
...
Break out the context menu with heuristically limited choices being
appended to the main list rather than re-selecting
Fixes https://gitlab.com/kicad/code/kicad/issues/4799
2020-07-07 14:18:35 -07:00
358cccfd73
A bit of safety if realtime connection updating isn't on.
2020-07-07 14:45:14 +01:00
e66523586b
Add Assign Netclass... to context menu.
...
ADDED Assign Netclass feature to EEschema.
Netclass assignments also now shown in status bar.
Fixes https://gitlab.com/kicad/code/kicad/issues/4581
2020-07-07 14:23:39 +01:00
3939b31027
Integration of netclasses into Eeschema.
...
This is mostly architecture, with the hookup of the Schematic Setup
dialog's Net Classes page. Things like assigning to a net on the
canvas to follow.
Fixes https://gitlab.com/kicad/code/kicad/issues/2132
Fixes https://gitlab.com/kicad/code/kicad/issues/4581
2020-07-06 20:00:50 +01:00
e9b99cc8b7
Fix grabbing connections from power components
2020-07-04 20:59:35 -04:00
b94e29e3b1
Persist ERC pin table in project settings
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2066
Also a partial fix for https://gitlab.com/kicad/code/kicad/-/issues/4577
2020-07-03 17:11:42 -04:00
bb1afb747a
Remove bus entry shape
...
The shape isn't needed anymore, since bus entries can be rotated
and mirrored like other items.
Fixes https://gitlab.com/kicad/code/kicad/issues/4588
2020-06-30 02:09:33 +01:00
6acd35c981
Cleanup.
2020-06-27 20:07:26 +01:00
2078e629c5
Eeschema: allow editing of junction properties diameter and color.
...
Add missing plot and print changes for the new bus entry properties.
ADDED: Junction properties diameter and color can now be edited.
Fixes: https://gitlab.com/kicad/code/kicad/issues/4593
2020-06-24 13:36:17 -04:00
853cf2c9b9
Eeschema: make bus wire entry properties editable.
...
CHANGED: Bus to wire entry object properties line color, width, and style
can now be edited.
Fixes: https://gitlab.com/kicad/code/kicad/issues/4591
2020-06-24 13:36:17 -04:00
c48f4272f3
Collapse a level out of the zoom settings.
...
The APP_SETTINGS_BASE now holds the list of zoom factors, and
the old legacy (screen-based) code has been removed.
2020-06-13 22:44:16 +01:00
f84406009b
Push a couple of layers of indirection out of grid settings.
2020-06-13 11:35:56 +01:00
eef81e84b2
Avoid marking a default name translatable: after translation the result
...
can be unexpected and broken.
2020-06-06 20:51:50 +02:00
4357c1d3b3
Coverity and compiler warning fixes
...
* Initialize variables
* Test dynamic casts
Fixes https://gitlab.com/kicad/code/kicad/issues/4620
2020-06-05 12:50:56 +01:00
ae852e17f9
Re-add null component checking in UpdateNetHighlighting
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4606
2020-06-03 20:36:30 -04:00
c01046c12f
Give new sheets an initial name and filepath.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4516
2020-06-02 20:28:20 +01:00
aadc926740
Coverity fixes and "auto" removal.
2020-06-02 17:22:23 +01:00
52078a4b1b
Allow setting mandatory derived symbol field properties.
...
CHANGED: All mandatory fields in derived symbols can be edited. This
not only includes the field value but also all text properties.
Kill the dual datasheet variable storage which caused many datasheet
bugs over the years. The datasheet is now always stored in the data
sheet field.
2020-06-02 14:21:11 +00:00
9414f65a3f
Eeschema: allow Properties... in wire context menu
...
Seems to have been forgotten from 91fd0635
2020-05-30 14:29:53 +00:00
91fd063585
Eeschema: allow editing of wire and bus properties.
...
CHANGED: Wire and bus lines properties (color, line width, and line type)
can be edited the same as graphical lines.
2020-05-29 14:33:27 +00:00
f3e4e61fa7
Push some more editing code out to the tool framework.
2020-05-27 23:29:51 +01:00
1792479ca5
Fix sheet pin import after SelectPoint API change
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4552
2020-05-27 11:21:59 -04:00
160981ee71
Better error reporting for DRC rule parsing.
2020-05-25 22:51:47 +01:00
ecec7192fc
Add "Select All" in schematic & layout disambiguation popup menu
...
ADDED: "Select All" in schematic editor disambiguation menu
ADDED: "Select All" in layout edtor disambiguation menu
Fixes https://gitlab.com/kicad/code/kicad/-/issues/3877
2020-05-24 23:35:04 +00:00
77a6550ba9
Fix bus unfolding with prefixes
2020-05-24 19:17:01 -04:00
699985cd97
Check for nested buses when highlighting
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4531
2020-05-24 16:15:22 -04:00
c7daf8a8f3
ADDED: Cross-probe highlighting of bus members
...
Note: this is a basic implementation but it could be
improved once we include bus information in the netlist
and pcbnew can natively keep track of buses and nets
instead of just nets.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4158
2020-05-24 13:30:23 -04:00
1e69f592f6
Rework net highlighting to use connections instead of strings
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1933
Fixes https://gitlab.com/kicad/code/kicad/-/issues/3921
2020-05-24 10:46:05 -04:00
a63df2fbf0
Remove BuildNetListBase from netlisting paths
2020-05-23 13:14:05 -04:00
d61b6f965e
Flatten some settings and remove some more globals.
2020-05-23 16:50:33 +01:00
70fb5cac96
Flatten one level of showElectricalTypes settings.
2020-05-23 16:50:33 +01:00
4cfff6b35d
Libedit: fix crash when right clicking.
...
Fixes #4511
https://gitlab.com/kicad/code/kicad/issues/4511
2020-05-22 09:01:29 +02:00
7c7b7f41da
Move SCH_SCREEN project access to SCHEMATIC
...
SCH_SCREEN no longer needs to be a KIWAY_HOLDER
2020-05-20 22:27:48 -04:00
c4142a5842
Remaining part of code forgotten by 73a1ce3e
2020-05-20 11:43:50 +01:00
fbc42a8cb5
Move schematic defaults to SCHEMATIC and add some missing settings entries
2020-05-20 00:03:23 -04:00
e1476dea58
Fix build
2020-05-19 23:57:53 -04:00
4e2e280bf4
Fix part adding
2020-05-19 13:24:57 -04:00
d7bd4c9b04
Move Eeschema globals to new SCHEMATIC object
...
Set up a new lineage for SCH_ITEMS to get back to the SCHEMATIC
they live on: Items will all be parented to the SCH_SCREEN that
they are added to, and each SCH_SCREEN will point back to the
SCHEMATIC that it is part of. Note that this hierarchy is not
the same as the actual schematic hierarchy, which continues to
be managed through SCH_SHEETs and SCH_SHEET_PATHS.
2020-05-18 13:04:56 -04:00
980aefea4b
Eeschema: fix copy and paste bug.
...
Add required library symbols to new file formatter and parser when copying
schematic symbols to prevent missing library symbol when pasting into a
different schematic which may not have the same library symbol available.
Fix a minor bug where the default schematic symbol reference was not set
by the parser when loading.
Fixes https://gitlab.com/kicad/code/kicad/issues/4442
2020-05-15 15:53:59 -04:00
ad88874adf
Use new file formats for copy and paste in schematic and symbol editors.
2020-05-13 18:56:19 -04:00
4a1ee40058
Pretty print bus definitions to the menus.
2020-05-13 16:26:53 +01:00
ba301c292a
Check for single item seletion for most property dialogs.
2020-05-13 13:42:23 +01:00
ec5f7b35a9
Attempt to fix crash with RMB on un-selected graphic line.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4414
2020-05-12 19:48:59 +01:00
724c669434
Move a few more commands to tool framework.
2020-05-12 18:12:38 +01:00
b29f55c1ca
Cosmetic minor changes for 2 icons.
...
Avoid using the same icon for 2 different actions in the same screen or menu.
2020-05-09 16:22:29 +02:00
1840fe351e
Eeschema: fix assertion when duplicating a sheet.
...
The duplicate sheet code path assigned a SCH_SCREEN object instead of a
SCH_SHEET object as a parent. A recently added assertion to check for
this did it's job.
Fixes https://gitlab.com/kicad/code/kicad/issues/4369
2020-05-08 14:57:44 -04:00
73e1496b25
Change attached-label algorithm.
...
Rather than try and keep moving with other items, calculate nearest
point on current line to original label at each step.
Fixes https://gitlab.com/kicad/code/kicad/issues/4347
2020-05-07 18:59:47 +01:00
51e72ed9ba
Finish the collect-attached-labels rewrite.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4341
2020-05-06 20:38:12 +01:00
f6d1aa1f42
Fix some failures to drop hover selections after executing a command.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4330
2020-05-06 19:02:21 +01:00
0f34fc2e5f
Simplify the "pick up attached labels" logic.
...
This should vastly reduce the number of side-effects we were seeing.
Fixes https://gitlab.com/kicad/code/kicad/issues/4311
Fixes https://gitlab.com/kicad/code/kicad/issues/git
Fixes https://gitlab.com/kicad/code/kicad/issues/4320
2020-05-06 15:48:58 +01:00
590a101a88
Eeschema: fix update schematic symbol library link bugs.
2020-05-05 18:06:43 -04:00
9c99286385
Fix a few Coverity warnings.
2020-05-05 16:42:59 -04:00
7183e9f97e
Make the new schematic and symbol library file formats the default.
...
This is a very large and potentially disruptive change so this will be an
unusually long and detailed commit message.
The new file formats are now the default in both the schematic and symbol
library editors. Existing symbol libraries will be saved in their current
format until new features are added to library symbols. Once this happens,
both the legacy schematic and symbol file formats will be no longer be
savable and existing libraries will have to be converted. Saving to the
legacy file formats is still available for round robin testing and should
not be used for normal editing.
When loading the legacy schematic file, it is imperative that the schematic
library symbols are rescued and/or remapped to valid library identifiers.
Otherwise, there will be no way to link to the original library symbol and
the user will be required manually set the library identifier. The cached
symbol will be saved in the schematic file so the last library symbol in
the cache will still be used but there will be no way to update it from the
original library.
The next save after loading a legacy schematic file will be converted to
the s-expression file format. Schematics with hierarchical sheets will
automatically have all sheet file name extensions changed to .kicad_sym
and saved to the new format as well.
Appending schematics requires that the schematic to append has already been
converted to the new file format. This is required to ensure that library
symbols are guaranteed to be valid for the appended schematic.
The schematic symbol library symbol link resolution has been moved out of
the SCH_COMPONENT object and move into the SCH_SCREEN object that owns the
symbol. This was done to ensure that there is a single place where the
library symbol links get resolved rather than the dozen or so different
code paths that previously existed. It also removes the necessity of the
SCH_COMPONENT object of requiring any knowledge of the symbol library table
and/or the cache library.
When opening an s-expression schematic, the legacy cache library is not
loaded so any library symbols not rescued cannot be loaded. Broken library
symbol links will have to be manually resolved by adding the cache library
to the symbol library table and changing the links in the schematic symbol.
Now that the library symbols are embedded in the schematic file, the
SCH_SCREEN object maintains the list of library symbols for the schematic
automatically. No external manipulation of this library cache should ever
occur.
ADDED: S-expression schematic and symbol library file formats.
2020-05-04 12:40:03 +00:00
5bed201a23
Don't collect connected labels on a paste.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4311
2020-05-03 21:47:53 +01:00
199bb2ffb0
Add hittesting for worksheets in Pcbnew and Eeschema.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4282
2020-05-03 00:07:38 +01:00
fa57c8a570
Eeschema: fix sheet bug in schematic editor drawing tool.
...
SCH_SHEET objects can only have another SCH_SHEET object as a parent
or nullptr for the root sheet so overload EDA_ITEM::SetParent() to
prevent the parent from being set to another type of object and add
some checks to the root sheet code just in case someone gets clever
and attempts to bypass the overloaded SetParent() call.
2020-04-26 14:27:51 -04:00
1535c83b88
Lay some groundwork for adding distances to DRC errors.
...
modified: eeschema/lib_rectangle.cpp
2020-04-24 14:46:22 +01:00
7308099852
Add an icon and put Schematic Setup in the toolbar.
2020-04-24 14:46:22 +01:00
facf40d3ce
libedit: Add drag to move behavior
...
ADDED: Drag to move behavior in the symbol editor
Fixes https://gitlab.com/kicad/code/kicad/issues/1904
2020-04-23 23:58:33 +01:00
f113370e1e
Edit worksheet properties when no other selection is available.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4044
2020-04-21 21:17:59 +01:00
a286cb5a8f
Keep labels on dragged wires.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2107
2020-04-19 18:24:39 +01:00
2b6089240a
Change super/subscript syntax to ^{foo} and _{foo}.
2020-04-18 21:04:41 +01:00
42cd604c3c
Expose Show Hidden Fields to GUI.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2010
2020-04-18 16:36:51 +01:00
d7d1cb6f78
A bunch of fixes to Eeschema Find/Replace.
2020-04-18 14:43:08 +01:00
9c8941e040
Remove a bunch of globals.
2020-04-16 17:34:46 +01:00
122b1ddaae
Unwrap an unnecessary layer now that we have new config stuff.
2020-04-13 20:58:12 +01:00
c82679a6f2
Fix crash bug when highlighting no net (found by Coverity).
2020-04-12 11:19:44 +01:00
292a9fadd9
Allow a click in the value field when searching for power nodes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4180
2020-04-11 23:51:00 +01:00
c4994eee7b
Fix a pair of bugs in the new highlight net logic.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4180
2020-04-11 13:02:18 +01:00
962aa73e12
Improve EE_COLLECTOR to not miss children of sheets or symbols.
...
Also implements pin highlighting and special cases for power symbols.
Fixes https://gitlab.com/kicad/code/kicad/issues/4180
2020-04-10 14:09:26 +01:00
cb7263d017
Eeschema: fix ERC dialog not shown after a double click, when recalled by tool ERC.
...
(the dialog was reactivated by calling Raise(), but this is not enough: Show()
must be called also, at least on Windows).
Fix also a minor wxWidgets alert in ERC dialog.
Fixes #4171
https://gitlab.com/kicad/code/kicad/issues/4171
2020-04-08 10:03:51 +02:00
8eb15fe911
Tidy up some Coverity issues.
2020-04-07 17:29:58 +01:00
1027c2fb8d
Eeschema: when placing a symbol, and after placing others instances of the symbol
...
deselect the previously placed items.
Otherwise, the changes (rotation, mirroring...) made during placing the current symbol
are applied to other previously placed items.
This is obviously not what is wanted, and creates crashes in Eeschema.
Fixes #4163
https://gitlab.com/kicad/code/kicad/issues/4163
2020-04-06 13:00:58 +02:00
cc9ac37a0e
Add text variable support to envVar processing.
2020-04-05 20:52:26 +01:00
591428b0d9
Remove some problematic global variables.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4121
2020-04-05 16:17:04 +01:00
20c00cbb21
Finish off "busses" -> "buses".
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4144
2020-04-02 18:27:05 +01:00
e811101567
fix a few Coverity warnings.
2020-04-01 09:34:44 +02:00
132d4d3ffa
Clean up compiler warning.
2020-03-30 14:15:59 +01:00
4990d1e7b2
Variable substitution framework.
...
This implements editing of variables and moving SCH_FIELDs,
TEXTE_MODULEs, TEXTE_PCB and worksheet items over to the new
framework.
2020-03-30 14:15:59 +01:00
5134856f18
Rationalise 3D settings data-structure.
...
Move the camera out to its own so that everything else is board-
related, and then rename BOARD_ADAPTER.
At some point the flags should probably be moved out too, and they
can have the EDA_3D_SETTINGS name.
2020-03-28 16:09:40 +00:00
615deb40f3
Eeschema: move, mirror and rotate block: fix some issues.
...
Fixes #4111
https://gitlab.com/kicad/code/kicad/issues/4111
2020-03-28 13:17:59 +01:00
ba36fc0009
Fix some Coverity issues.
2020-03-25 14:38:43 +00:00
d69ebfae49
Push tool framework base down into TOOL_HOLDER.
...
This allows us to use it outside of EDA_BASE_FRAMEs (in this case, in
PANEL_PREVIEW_3D.)
2020-03-24 19:00:25 +00:00
cf25975876
EEschema: Fix back annotation
...
Repairs back annotation after some schematic code modifications
2020-03-24 10:53:00 +00:00
66382db7dd
Add some defensive code for selection anomalies.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4021
2020-03-21 20:55:50 +00:00
204f2cd580
Reference -> reference designator.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4012
2020-03-17 16:09:25 +00:00
cee973dc04
Move ERC error reporting over to the new framework.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1989
2020-03-16 11:06:15 +00:00
085d80e3f3
Remove duplicated settings from preferences.
...
These have now moved to project-specific settings.
2020-03-13 17:28:53 +00:00
dc9882c3b9
Fix a few bugs with Sheet field dragging and rotating.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4046
2020-03-12 13:57:29 +00:00
437f888c25
Schematic Setup dialog.
...
Includes:
- moving some of the project settings from the Preferences dialog
- ERC severites
- project-specific field-name templates
Fixes https://gitlab.com/kicad/code/kicad/issues/2145
2020-03-10 18:54:17 +00:00
535033c5c9
Enable editing of sheet fields.
2020-03-07 18:52:30 +00:00
fe3e0307d8
Move sheet name and filename to SCH_FIELD architecture.
...
Only internal storage architecture has changed (so far).
2020-03-06 16:23:44 +00:00
b7cd0c54c2
Fix compil issues, especially on Windows:
...
Replace SEVERITY_ERROR by RPT_SEVERITY_ERROR to avoid collision with a system definition.
Replace other SEVERITY_XXX by RPT_SEVERITY_XX for consistency.
Fix compil warnings and some other compil issues.
2020-03-04 10:48:18 +01:00
85c2e0d23a
Add user-defined severities, exclusions and colors to DRC markers.
...
Exclusions are currently persisted in the project file.
Fixes https://gitlab.com/kicad/code/kicad/issues/1989
2020-03-04 00:39:28 +00:00
20fde2c16f
eeschema: Fix find from RTree change
...
The RTree doesn't keep pins and fields in the tree, so we need to search
for them differently.
Fixes #3979 | https://gitlab.com/kicad/code/kicad/issues/3979
2020-03-03 09:35:12 -08:00
866aac9737
Clean up a few unused names of caught exceptions
2020-03-01 00:33:45 +00:00
3f31d48b5e
Use a more friendly method of ensuring unique sheet names.
...
Also fixes a bug where we were failing to respect the
forceKeepAnnotations flag when processing content nested in
a sheet.
Fixes https://gitlab.com/kicad/code/kicad/issues/3681
2020-02-29 00:07:57 +00:00
d5ceb8252e
Clean up some warnings
2020-02-28 00:06:52 +00:00
245b778454
libedit: Fix speed of lib check
...
The symbol check output the HTML message for each item. This is _very_
slow and can lock the system reponsiveness. Changing to a queue/flush
method is much faster
2020-02-27 15:06:48 -08:00
c7ec110fba
Only center focused items when they're not visible.
...
This includes outside the window and behind an occluding dialog.
This keeps the view from jumping around when focusing on nearby
objects.
2020-02-24 23:19:17 +00:00
c68b554c8e
Promote PathsAndReferences from wxArrayString to first-class-citizen.
...
Keeping the data in an un-serialized format greatly simplifies usage,
and should make it more robust.
2020-02-24 23:19:17 +00:00
41f59ab873
Avoid intermittent compiler crash in GCC 7.4
...
Somehow the previous way this statement was written can cause an
internal compiler crash on gcc 7.4.0-1ubuntu1~18.04.1 sometimes.
2020-02-22 21:26:48 -05:00
ea025a35e5
Change KUUID to KIID.
2020-02-21 22:20:42 +00:00
e8e3b4f11e
Rename UUID to KUUID to fix MSVC build
...
Also add another newly-required boost flag
2020-02-20 22:07:17 -05:00
129042f8a6
Convert timestamps to UUIDs.
2020-02-20 21:29:52 +00:00
e59a3d981e
Implement a new settings framework across all of KiCad
...
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme
Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
2020-02-19 23:44:56 -05:00
2ca16c0b29
eeschema: fixes some issues related to translated and not translated field names.
...
When searching for fields, the code was sometimes comparing translated and not translated names.
This is an issue for mandatory fields, in non English languages.
Translated field names should be used only in messages.
2020-02-16 17:52:53 +01:00
2017389f2d
Pinning for library trees in FPEditor and SymbolEditor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2288
2020-02-14 00:10:40 +00:00
03f74c87a1
Update immediate mode location and restart wires
...
The immediate action option clears (or not) the position of the events.
We use this to determine if the command should start at the given
position or merely activate the tool. This was being checked in the
menu options, which only activated for tool commands in the context
menu. Moving to the process event, we catch hotkeys as well.
This also restores the previous logic in eeschema that used a static
variable for storing wires rather than the private class variable.
Starting the draw event now picks up from the existing wires when
activated in immediate mode.
Fixes #3891 | https://gitlab.com/kicad/code/kicad/issues/3891
2020-02-11 09:12:36 -08:00
ba9dedaaf3
Eeschema, point editor: constraint corners of a SHEET symbol to stay on 50 mil grid
...
Fixes #3867
https://gitlab.com/kicad/code/kicad/issues/3867
2020-02-07 10:06:01 +01:00
b1240b5b1e
Gracefully shutdown tools when frames are closed
...
If the tools are not gracefully exited, then the stack variables are
never destroyed, so variable lifetime issues can occur.
Fixes https://gitlab.com/kicad/code/kicad/issues/1753
2020-02-05 22:23:24 +00:00
7d64527eeb
eeschema: Handle Rebuild for subcomponents
...
The parents are the only items that live in the RTree, so the rebuild
check needs to recurse into the sub structure to check for selection
Fixes https://gitlab.com/kicad/code/kicad/issues/3858
2020-02-04 22:49:43 -06:00
ac875e26a8
Fix handling of SCH_PINs on multi-unit parts
...
Fixes https://gitlab.com/kicad/code/kicad/issues/3770
2020-02-04 11:51:29 +00:00
9f7e0ef8e8
eeschema: Remove Bus-Bus and Place sheet pin buttons
...
Cleaning toolbars of functions that are superfluous or do not match well
to the user workflow.
2020-02-04 04:39:26 -06:00
b8108d294f
Fix a few I18n messages, and minor wxWidgets alerts.
2020-02-01 14:06:56 +01:00
3d0b3a51f3
Eeschema: Adding back annotation
...
ADDED: Back annotation algorithm,
eeschema back annotation dialog
CHANGED: added some minor helper methods to SCH_REFERENCE_LIST and SCH_REFERENCE,
split SCH_REFERENCE_LIST::CheckAnnotation on 2 parts to reuse code
2020-01-29 16:33:57 +00:00
84a697060f
Don't insert pins/text when moving
...
Pins and component fields belong to the parent object and need to be
avoided when moving to prevent re-insertion on update.
Fixes #3804 | https://gitlab.com/kicad/code/kicad/issues/3804
Fixes #3811 | https://gitlab.com/kicad/code/kicad/issues/3811
2020-01-25 09:30:51 -08:00
da222d96b1
Fix a few issues with bus unfolding
...
Bus submenus weren't sending events because tool wasn't set.
Net names need to be unescaped for display.
Unfolding wasn't drawing the new wire segments.
SCH_LINE_WIRE_BUS_TOOL could get caught in an infinite event handling loop.
Fixes https://gitlab.com/kicad/code/kicad/issues/3796
2020-01-21 22:02:46 -05:00
70908043a3
Convert enums inside eeschema and the symbol editor to be scoped
...
Scope: NETLIST_ITEM, CONNECTION_TYPE, ELECTRICAL_PINTYPE,
NET_CONNECTION, NETLIST_ITEM, GRAPHIC_PINSHAPE
Note, the pin type enum had PT_ added to the front to prevent
shadowing of the INPUT symbol on msys2 (see discussion at
c17c9960d8
2020-01-18 20:51:28 +00:00
40f97b55c7
Remove confused dynamic_cast
...
dynamic_cast could not resolve the cast chain leading to a null undo
point. Since we know the item to be LIB_ITEM, we can use static_cast
anyway and avoid the overhead.
Fixes #3771 | https://gitlab.com/kicad/code/kicad/issues/3771
2020-01-16 06:17:04 -08:00
33a40e788b
Add missing null check to library viewer control tool
2020-01-13 14:40:55 +00:00
836c1ea56e
Fix a bunch of un-caught boost::bad_pointer exceptions.
...
This also removes vector cover types which do nothing except obfuscate
the underlying implementation.
Mainly changes SCH_SHEET_PINS and CONFIG_PARAM_ARRAY (which will soon
be replaced by Jon's new stuff).
2020-01-12 19:55:00 +00:00
960b553a70
Cleanup type casting in EE toolbase
...
* Ensure the lib edit undo checks for pointer validity
* Assert that the frames are the correct type (satisfies coverity)
* Convert C casts to C++ casts
2020-01-12 19:47:13 +00:00
84d5d6c168
Eeschema: Return null in case of canceling placement
2020-01-11 17:02:55 -08:00
3d8150032f
Fix some uninitialized variables found by Coverity.
2020-01-11 21:29:25 +00:00
7c28c3838a
Comment-only changes
...
Makes class comments conform to coding standards
2020-01-10 16:43:01 -08:00
88eab8134e
Fix a couple of uninitialized variables (from Coverity scan).
2020-01-11 00:11:31 +00:00
8abfc13053
Fix possible null dereference (from Coverity scan).
2020-01-10 22:32:50 +00:00
77c60d9655
Remove the last vestiges of dlist
...
It served us (mostly) well for more than a decade. It helped KiCad grow
before the std:: came into decent shape or speed. It was a good little
list.
RIP DLIST 2008-2020
2020-01-10 06:37:08 -08:00
6e5e453d0d
Replace EESchema DLIST
...
This moves EESchema DLIST structures to rtree. These changes are more
fundamental than the pcbnew changes from 9163ac543888c01d11d1877d7c1961b22d60
2020-01-10 06:37:08 -08:00
ca34ade00c
Make global labels have the same spin style as net/hierarchical labels
...
For legacy reasons, it stored left and right "spin" as flipped integers in the file format.
But the code handled the flip in multiple locations rather than just doing it on file io.
This change unifies the internal code and does the mapping in the file I/O.
2020-01-08 19:07:55 +00:00
13b6028e1b
Refactor all math into a new kimath library
...
* Split up the thirdparty code into the thirdparty folder (#3637 )
* Create a new kimath static library containing all the math functions
This is part of cleaning the build system for #1906 .
2020-01-07 17:12:59 +00:00
5255a29bc0
Always use local bus member names for unfolding menu
2020-01-03 22:11:00 -05:00
d5a80e9cfd
Fix shadowing warning
2020-01-03 18:52:46 -05:00
ea218bc722
eeschema: Allow hierarchy navigator to stay open
...
ADD: User can now decide to keep the hierarchy navigator open while working
on a schematic.
This behavior can be configured in eeschema->preferences->eeschema->Editing options.
2020-01-03 21:08:40 +01:00
81292d2bf1
eeschema: Cleanup processing for multiple line editing
2020-01-03 19:30:29 +00:00
079423c3cc
eeschema: Remove unused include of eeschema_id.h
2020-01-03 16:04:54 +00:00
b84fe2b703
ADDED: Editing style of multiple graphical lines at the same time.
...
Provides the ability to quickly set the style of multiple lines. This is only allowed if the selection includes _only_ graphical lines.
2019-12-31 04:05:51 +00:00
e85701f405
Don't allow IS_NEW flag on created-line-segments to fool us.
...
When dragging we'll create new line segments between selection-edge
objects and things outside the selection that they're attached to.
These new lines have their IS_NEW flags set, but shouldn't fool us
into thinking that the selection contains pasted (or placed) items.
2019-12-28 11:58:33 +00:00
87e163945e
Items added to a selection for a drag should only be temporary.
...
After the drag, cancel, or undo, only the originally-selected items
should remain selected.
2019-12-28 11:58:33 +00:00
19ceb11ae7
Change more enums over to scoped enums
2019-12-28 00:55:11 +00:00
d3edeaec50
Fix "Properties" not appearing in right click menu for graphic line.
2019-12-26 15:15:34 +00:00
3ca231aa78
Rename lib viewer frame files to use the class name
2019-12-19 14:05:46 +00:00
d9de28de35
Eeschema: usability enhancement.
...
ADDED: a config option to select (when clicking on a pin) the parent symbol
or only the pin.
Previously, when cliking on a pin, the parent symbol was selected.
Allowing the pin selection is mandatory in cross probing, and to display the pin
characteristics in some cases, for instance if a pin is flagged by the ERC tooL.
2019-12-19 12:41:51 +01:00
a049348576
Eeschema: fix null pointer use.
...
Fixes #3694 | https://gitlab.com/kicad/code/kicad/issues/3694
2019-12-19 09:11:34 +01:00
2b920ffa04
Symbol editor: inheritance symbol editing bug fixes.
...
There is no need to create a new root symbol and re-parent all derived
symbols when renaming a root symbol. Just rename the buffered root
symbol.
Test for duplicate symbol names when validating the properties dialog
information to prevent broken symbol pointers.
Fix a field drawing bug when editing derived symbols.
Fix bug to insure duplicate symbol names cannot exist in a library.
Fixes kicad/code/kicad#3654
Fixes kicad/code/kicad#3672
2019-12-16 10:11:06 -05:00
e9323fff82
Eeschema: Move SCH_LINE_WIRE_BUS_TOOL to class
...
The remaining static elements of SCH_LINE_WIRE_BUS_TOOL are moved into
the class and passed elements eliminated in favor of held class
elements.
2019-12-13 12:41:57 -08:00
cda291adae
eeschema: Clean bits of DLIST
...
Removes the extra DLIST manipulation from SCH_LINE_WIRE_BUS_TOOL and
moves the static storage into class storage
2019-12-13 11:22:18 -08:00
20836261d7
Fix minor coding policy violations.
2019-12-12 14:55:35 -05:00
a18d7a8495
Eeschema: fix a selection bug created in commit bec87864.
...
Apparently the schematic and symbol library editors now have common
selection filtering so checking for a valid LIB_EDIT_FRAME when
filtering for the schematic editor frame prevented all schematic
object from being selected.
2019-12-12 11:42:11 -05:00
bec878640c
Symbol editor: fix crash caused by broken root symbol name.
...
The symbol editor selection criteria did not include LIB_FIELD objects
which allowed the root symbol name to be changed causing broken derived
symbol links. Disable the symbols fields from being edited when a
derived part is shown in the editor to prevent this.
Add a missing warning that deleting a root symbol used to derive other
symbols would also delete all derived symbols from a library. Give the
user a chance to cancel the delete operation in this case.
Fixes kicad/code/kicad#3654
2019-12-12 10:45:12 -05:00
8e150521a2
Fix a few minor symbol library inheritance bugs.
...
Don't clobber value file when load aliases in legacy symbol library cache
parser.
Use actual symbol library LIB_PART pointer rather than a flattened copy
of the symbol. This fixed a bug when displaying the parent field in the
message panel for derived symbols.
Simplify the flatten code by copying the parent and updating the lesser
information from the inherited symbol.
2019-12-06 11:33:52 -05:00
54f066fed7
Implement simple inheritance for library symbols.
...
This change completely removes the LIB_ALIAS design pattern an replaces
it by allowing LIB_PART objects to inherit from other LIB_PART objects.
The initial implementation only allows for single inheritance and only
supports the mandatory fields in the derived part because that is all
that the current symbol library file format will support. Once the new
file format is implemented and saving to the old file format is deprecated,
more complex inheritance will be added. The LIB_ALIAS information saved
in the document files was move into the LIB_PART object. This change
impacts virtually every part of the schematic and symbol library editor
code so this commit message is woefully incomplete.
REMOVE: Removed the symbol aliases concept from the schematic and symbol
editors and the symbol viewer.
NEW: Replace the symbol alias concept with simple inheritance that allows
a library symbol to be derived from another library symbol.
2019-12-06 11:33:52 -05:00
3af3bf894c
Make sure the IS_MOVED flag gets set when breaking out of a bus.
...
This (among other things) causes an update-preview event to be sent
when modifying it (such as rotating).
Fixes: lp:1854456
* https://bugs.launchpad.net/kicad/+bug/1854456
2019-12-02 20:01:44 +00:00
ffcf3b01fc
Fixup issue with adding junctions
...
Segfault when we pass a component to the routine as it expects to see a
selection.
2019-11-27 11:13:01 -08:00
a5f8340654
eechema: add junction if needed when component is placed
...
Fixes: lp:1849376
* https://bugs.launchpad.net/kicad/+bug/1849376
2019-11-26 19:23:02 -08:00
087a90cf99
eeschema: Update titlebar when searching schematics
...
Fixes: lp:1851641
* https://bugs.launchpad.net/kicad/+bug/1851641
2019-11-24 01:25:00 +00:00
7339eb31eb
eeschema: Allow bus entry labels to rotate and mirror
...
Fixes: lp:1853079
* https://bugs.launchpad.net/kicad/+bug/1853079
2019-11-23 23:35:21 +00:00
fb52124426
Fix several issue with bus entry connectivity.
...
When dragging a bus the entry is connected to the bus so the wire
connected to the entry (if any) needs to stretch.
While an entry can connect in the middle of bus, it cannot connect
in the middle of a wire.
Fixes: lp:1849973
* https://bugs.launchpad.net/kicad/+bug/1849973
2019-11-18 11:36:30 +00:00
1df7b718d9
eeschema: Allow labels to rotate on bus unfold
2019-11-15 20:43:56 +00:00
42f5c944b3
libedit: When pasting keep original multi-unit
...
Copy/Paste should keep the original items' designation for all units and
conversion type. If it was specified in the original copy, we should
keep the same specification when pasting (but update for the current
frame)
2019-11-12 16:11:08 -08:00
9d288968e7
Be more explicit about extent of schematic cleanups.
...
The new connectivity algorithm had a tendency to cleanup
globally, but that could insert undo records from other sheets
into the current screen's undo stack. Needless to say, this
was a recipie for segfaults.
Fixes: lp:1846247
* https://bugs.launchpad.net/kicad/+bug/1846247
2019-11-10 23:25:54 +00:00
81ce588a00
eeschema: Set sheet unit number when setting unit
...
The auto increment needs to ensure the unit number is updated in two
places. Hierarchy and draw list.
Fixes: lp:1851431
* https://bugs.launchpad.net/kicad/+bug/1851431
2019-11-05 14:04:01 -08:00
984c64677e
Hook up rotate & flip to bus entries when drawing them.
...
Also adds support for the bus entry shape hotkeys while drawing.
Fixes: lp:1849967
* https://bugs.launchpad.net/kicad/+bug/1849967
2019-11-05 17:22:51 +00:00
bbf355a12f
eeschema: Fix an issue with duplicate timestamps
...
Duplicating into a non-clone still doesn't get a new timestamp, so we
need to explicitly set it.
2019-10-29 16:48:19 -07:00
868ff5bb2c
Right click gets a new object if the mouse has moved
...
Right click is a pointing operation combined with a request for the
context menu. We need to highlight the user's intended object when they
have moved their mouse to a new element instead of showing the context
menu for the selected object.
However, in cases where the selection is difficult to make, it is
sometimes helpful to select the item first, then right-click. In these
cases, we keep the selection where the mouse remains inside the selected
object's bounding box.
2019-10-29 16:11:06 -07:00
7b2d6ab40e
eeschema: Allow mult-part placement option
...
When placing a new component in the schematic, this allows the user to
iterate through all units in the selected component without re-opening
the choose part dialog. It also allows the optional addition of
multiple copies of the same component to be placed in the schematic.
Fixes: lp:1806217
* https://bugs.launchpad.net/kicad/+bug/1806217
2019-10-29 12:20:14 -07:00
e533ea4ae6
eeschema: Keep selection with only components
...
Adding a field to a selection changes the bounding box and count for
rotation. This can cause odd offsets when the field is rotated against
the selection center rather than the bounding box as well as with the
component.
Fixes: lp:1849078
* https://bugs.launchpad.net/kicad/+bug/1849078
2019-10-28 10:50:26 -07:00
080275b4ee
Cleanup wire merge code
2019-10-18 20:15:29 -07:00
92011d91d2
eeschema: Testing for static/dynamic cast failure
2019-10-18 15:29:26 -07:00
363281dd4d
eeschema: add junction when needed for broken wire
...
The break wire command will break all wires at a point. If there are
multiple crossing wires, we need to check to see if a junction might be
required to reflect the new connection.
Fixes: lp:1848450
* https://bugs.launchpad.net/kicad/+bug/1848450
2019-10-17 12:22:57 -07:00
d9336e9f97
Reset autoplace flag when a field is moved with respect to its component.
...
Fixes: lp:1843929
* https://bugs.launchpad.net/kicad/+bug/1843929
2019-10-01 15:31:52 +01:00
f2bf9fa534
eeschema: Prevent crash on move/drag re-entry
...
Restarting a move/drag operation breaks the stack by starting the tool
without popping it on exit.
TODO: implement RAII for these stack push/pop
2019-09-11 17:01:16 -07:00
1a375a1e71
Better handling of SPICE current probe statements.
2019-09-10 11:07:47 +01:00
f21e24cd17
Fix pin rotatation and SPICE current probe statement for 2-pin symbols
...
Fixes: lp:1843159
* https://bugs.launchpad.net/kicad/+bug/1843159
2019-09-08 22:54:49 +01:00
44a1cf9f1b
Implement quiet-mode for selection clearing.
...
Also adds comments for exising quiet-mode calls.
Fixes: lp:1843177
* https://bugs.launchpad.net/kicad/+bug/1843177
2019-09-08 19:45:35 +01:00
0ff20c18a3
More direct selection handling.
...
Fixes: lp:1842750
* https://bugs.launchpad.net/kicad/+bug/1842750
2019-09-07 20:52:17 +01:00
3996a490a1
Re-allocating a std::vector invalidates its iterators.
...
When we add enough SHEET_PINs that the vector has to grow, it
re-allocates the vector causing our for-loop to get its knickers
tied in a knot.
Fixes: lp:1842394
* https://bugs.launchpad.net/kicad/+bug/1842394
2019-09-04 11:50:56 +01:00
8bbbc66e46
Another attempt to fix the crash-on-selection bug.
...
Fixes: lp:1842394
* https://bugs.launchpad.net/kicad/+bug/1842394
2019-09-03 22:29:05 +01:00
54a85cfaa2
Not everything in a VIEW_GROUP is an EDA_ITEM.
...
Fixes: lp:1842394
* https://bugs.launchpad.net/kicad/+bug/1842394
2019-09-03 17:24:50 +01:00
efbc802f4d
Fix sheet rotation issues.
...
1) When sheet pins are on 3 or more sides there's no point in switching
the orientation to vertical.
2) Careful that we don't cause the sheet to walk when rotating and the
sheet-name or file-name is longer than the side it's on.
Fixes: lp:1841714
* https://bugs.launchpad.net/kicad/+bug/1841714
2019-09-02 22:36:55 +01:00
fc50ddda64
Implement Paste Special for eeschema.
...
Also changes the normal paste behaviour to only clear annotations
when a collision is found.
Fixes: lp:1837002
* https://bugs.launchpad.net/kicad/+bug/1837002
2019-09-02 19:24:29 +01:00
5e353e8967
Fix another case of selection getting out of sync with dragged items.
...
Use a big hammer this time.
Fixes: lp:1839780
* https://bugs.launchpad.net/kicad/+bug/1839780
2019-08-31 20:23:06 +01:00
33625dbd9d
Add support for cut/paste of unsaved sheet content.
...
Fixes: lp:1841801
* https://bugs.launchpad.net/kicad/+bug/1841801
2019-08-30 21:56:57 +01:00
71c7bf3274
Avoid ghosting items in original location when pasting.
2019-08-29 23:56:16 +01:00
02a7a79e0d
Use resolved path when trying to load sheet content.
...
Also, if it can't be loaded then at least initialize it so that we
don't crash later (trying to access a NULL screen).
Fixes: lp:1841801
* https://bugs.launchpad.net/kicad/+bug/1841801
2019-08-29 23:56:16 +01:00
bc450853ae
More robust solution for adding dragged items to selection.
...
Fixes: lp:1839780
* https://bugs.launchpad.net/kicad/+bug/1839780
2019-08-29 23:56:16 +01:00
83b2332f1f
eeschema: Check for proper type before dereference
...
When bundling a selection, we need to ensure that we have correct types
before attempting to dereference.
Fixes: lp:1841919
* https://bugs.launchpad.net/kicad/+bug/1841919
2019-08-29 08:47:26 -07:00
0d3f6a4930
eeschema: Remove Save All
...
Saving individual parts of a schematic can break the schematic. This
moves the schematic save option to save all sheets rather than just the
current sheet.
Fixes: lp:1840383
* https://bugs.launchpad.net/kicad/+bug/1840383
2019-08-27 20:21:02 -07:00
5348f88a8f
Add sheet pins to candidate list by hand (as they're not in the view).
...
Fixes: lp:1841555
* https://bugs.launchpad.net/kicad/+bug/1841555
2019-08-27 21:08:36 +01:00
a5a237ac32
Improve readability of flag checking.
2019-08-27 19:23:07 +01:00
49a0907c55
Force deletion of junctions which were selected.
...
Fixes: lp:1841456
* https://bugs.launchpad.net/kicad/+bug/1841456
2019-08-27 19:23:07 +01:00
b109aba663
Add a file browser to the Sheet Properties dialog.
...
Fixes: lp:1840459
* https://bugs.launchpad.net/kicad/+bug/1840459
2019-08-26 00:45:34 +01:00
23fd4b64dd
Remove curly braces from netname escaping context.
...
They're now used for bus definition control characters.
Also fixes the sheet pin edit dialog to correctly escape/unescape
netnames.
Fixes: lp:1840834
* https://bugs.launchpad.net/kicad/+bug/1840834
2019-08-22 10:53:39 +01:00
cc93d82025
Don't drop selection until unfold net has been chosen.
...
Fixes: lp:1831466
* https://bugs.launchpad.net/kicad/+bug/1831466
2019-08-21 15:35:02 +01:00
a25368cc6b
Improve spelling.
...
The groundwork here is thanks to kunda1.
Fixes: lp:1831510
* https://bugs.launchpad.net/kicad/+bug/1831510
2019-08-20 19:14:05 +01:00
3135b63976
Eeschema: Update pins on paste
...
We use the pin cache to mark the pin locations for future operations.
This needs to be updated after paste.
Fixes: lp:1840286
* https://bugs.launchpad.net/kicad/+bug/1840286
2019-08-16 09:32:35 -07:00
49dd5d838c
libedit: Fix inverted Y axis on move command
...
Also clean up some code formatting issues
2019-08-15 20:13:18 +01:00
29af26565d
Fix re-entrancy issue in LibEdit move tool.
2019-08-15 15:51:27 +01:00
8ba7d4570c
Move warp-mouse-on-move setting from Eeschema settings to common settings.
...
It's also used by the Symbol Editor, and will likely be used by
Pcbnew and friends in the future.
2019-08-15 12:53:04 +01:00
206b40621e
Fix bugs in Eeschema paste.
...
1) don't ASSERT; use exceptions (which can be caught) instead.
2) clean up LIB_LOGGER so it's only used during sync
3) fix typos in wxLogMessage() calls so they produce output.
4) throw on unrecognized token in loadContent().
5) if clipboard can't be pasted as content then paste as text.
Fixes: lp:1840172
* https://bugs.launchpad.net/kicad/+bug/1840172
2019-08-15 10:00:23 +01:00
b4c8657904
Fix non-visible-part or conversion items from getting selected.
...
Also renames lib_draw_item to lib_item to match the class.
Fixes: lp:1840170
* https://bugs.launchpad.net/kicad/+bug/1840170
2019-08-15 10:00:23 +01:00
3cdf88f2c6
CERN copyrights for work packages.
2019-08-14 09:35:15 +01:00
e855b244ae
Highlight whole net for simulation voltage probe.
2019-08-12 22:21:09 +01:00
b414cbfada
Cleanup doDelete ACTIONs
2019-08-12 13:49:55 -04:00
79b2ff7551
Refactor deleteTool ACTION removing duplicates
2019-08-12 13:49:55 -04:00
039bd92ea5
Make LibEdit respect the Move-warps-cursor setting.
2019-08-10 11:58:05 +01:00
c5fb8518d2
Redraw pins when placing when they are modified.
...
Fixes: lp:1839363
* https://bugs.launchpad.net/kicad/+bug/1839363
2019-08-08 14:09:42 +01:00
9fe7bfb596
Check for focus loss from dialog before doing cut/copy/paste in edit frame.
...
Fixes: lp:1838708
* https://bugs.launchpad.net/kicad/+bug/1838708
2019-08-08 13:51:23 +01:00
a96158e26b
Add current probe to SPICE simulation.
...
Fixes: lp:1740321
* https://bugs.launchpad.net/kicad/+bug/1740321
2019-08-05 16:48:18 -06:00
23d824de66
Simulator improvements.
...
1) Add highlighting to simProbe and simTune tools.
2) Probe tool should accept wires and pins, not wires and components.
3) Give simulator window a flat look to match rest of Kicad.
4) Collapse whitespace out of simulator window.
5) Add some error messages.
6) Add some whitespace to simulation setting dialog.
2019-08-05 16:48:18 -06:00
ce7833b982
Warp display when selecting schematic items
...
When selecting items where the reference point is off-screen, GTK
would default the cursor to jump to the bottom of the screen.
Fixes: lp:1838843
* https://bugs.launchpad.net/kicad/+bug/1838843
2019-08-03 19:17:53 -06:00
c624ee9cff
Re-parent new objects on duplicate.
...
Fixes: lp:1838269
* https://bugs.launchpad.net/kicad/+bug/1838269
2019-08-01 21:40:18 -06:00
03a33b6b56
Selection fixes for multi-part lib items.
...
1) Don't select pins from other units/conversions
2) Don't delete pins from other units/conversions
Fixes: lp:1838511
* https://bugs.launchpad.net/kicad/+bug/1838511
2019-07-31 22:34:24 -06:00
c03535343c
Don't apply GTK fix to OSX: it produces somewhat random crashes.
...
Fixes: lp:1837225
* https://bugs.launchpad.net/kicad/+bug/1837225
2019-07-28 11:28:42 -06:00
70270f5bd1
Fix accidental commit of debugging change.
2019-07-27 23:33:34 -06:00
0a0eb35ee8
Update comments with latest test results.
2019-07-27 23:27:21 -06:00
2af41e87f9
Don't add first found object to selection until Find (or return) is hit.
...
Fixes: lp:1838021
* https://bugs.launchpad.net/kicad/+bug/1838021
2019-07-27 00:20:52 -06:00
21b90de829
Another attempt to work around Apple's [NSAlert runModal] bug.
...
Fixes: lp:1837225
* https://bugs.launchpad.net/kicad/+bug/1837225
2019-07-26 16:47:17 -06:00
77334628c4
Change default tool behaviour to skip unhandled events.
...
The problem is that wxEVT_CHAR_HOOK doesn’t do the key translation
properly. wxEVT_CHAR does, but we only get to that if we skip the
event at the end of the tool’s event processing loop, which most tools
don’t do. (Selection tools, point editors, pickers, and a couple of
others do skip, which is probably why this didn’t get reported earlier.)
I played around with a couple of ways to fix wxEVT_CHAR_HOOK. Most of
them don’t work, and the few egregious hacks I tried weren't cross-
platform.
So I’m changing it so that most tools now skip at the end of their
event loops. I left out a couple that I felt were high risk (length
tuning, for instance). But there’s still enough risk that I’m 100%
sure it will break something, I just haven’t a clue what.
Fixes: lp:1836903
* https://bugs.launchpad.net/kicad/+bug/1836903
2019-07-26 12:21:24 -06:00
815602d1af
Fix missing AF_ACTIVATE flags on some tools.
...
Fixes: lp:1813659
* https://bugs.launchpad.net/kicad/+bug/1813659
2019-07-26 12:21:24 -06:00
6b031d9b9e
Symbol editor: fix an issue when editing LIB_RECTANGLE graphic items.
...
The point editor expects rectangles with a height and width > 0.
Previously, this constraint did not exist,
so some LIB_RECTANGLE graphic items can create issues when trying to move a corner.
Now, the LIB_RECTANGLE graphic item is normalized before trying to move a corner.
2019-07-26 10:40:40 +02:00
b858fa38c4
Fix crash bugs in picker tools.
2019-07-21 19:06:06 -06:00
de4854d112
Eeschema - restrict buses and wires to H and V orientation was taken in account only when activating the Create Bus or Wire tool.
...
Now taken in account during creation.
Fixes: lp:1837308
https://bugs.launchpad.net/kicad/+bug/1837308
2019-07-21 10:02:43 +02:00
4d4adf0753
A possible hack to work around the apple runModal bug.
...
Fixes: lp:1837225
* https://bugs.launchpad.net/kicad/+bug/1837225
2019-07-20 17:31:56 -06:00
0821f1ac11
Move crosshairs to found item; remove find highlighting when find dialog closed.
...
Fixes: lp:1837069
* https://bugs.launchpad.net/kicad/+bug/1837069
2019-07-19 18:41:11 -06:00
0b08e4dcd2
Deactivate other tools when running one based on a PICKER.
...
In particular, if the last one was a PICKER tool, then we're going
to assert on "click-handler-already-set".
Fixes: lp:1836673
* https://bugs.launchpad.net/kicad/+bug/1836673
2019-07-19 15:29:10 -06:00
e32a50b34d
Simulator: fix a crash when using the "Probe" or "Tune" tool, when clicking on an item is schematic editor.
2019-07-19 10:12:54 +02:00
5324b65fb0
eeschema: Don't trust the pointer
...
We are not guaranteed a selection. Keep pointers to the front items
guarded. This can happen after repeating a new item, e.g.
2019-07-17 18:21:36 -07:00
3de00eef5f
Cleanup.
2019-07-17 21:45:43 +01:00
d67c2d13c7
Fix re-entrancy problem in cross-probing.
...
Fixes: lp:1836940
* https://bugs.launchpad.net/kicad/+bug/1836940
Fixes: lp:1836937
* https://bugs.launchpad.net/kicad/+bug/1836937
2019-07-17 21:35:28 +01:00
a61673a144
Fix compile error for those who have to use the somewhat feeble gcc.
2019-07-16 15:11:50 +01:00
7d10b29592
Cleanup unused includes.
2019-07-16 01:15:33 +01:00
3069fd5974
Exit point editor after an <esc> while dragging.
...
Fixes: lp:1836652
* https://bugs.launchpad.net/kicad/+bug/1836652
2019-07-16 01:09:49 +01:00
e816a0c29d
Push Eeschema & PLEditor PICKER_TOOLs down into common.
...
Also implements a more robust push/pop tool strategy for pickers.
2019-07-16 00:44:01 +01:00
58ca5b71a9
A more robust fix for 36f1d023f0.
...
This one also handles when the events get out-of-order due to them
starting out in the Simulation window and not getting dispatched until
the mouse goes over the Schematic window.
Fixes: lp:1835907
* https://bugs.launchpad.net/kicad/+bug/1835907
Fixes: lp:1836544
* https://bugs.launchpad.net/kicad/+bug/1836544
2019-07-15 14:15:24 +01:00
34894acb89
Don't try to copy a null item.
...
Fixes: lp:1836126
* https://bugs.launchpad.net/kicad/+bug/1836126
2019-07-11 18:23:32 +01:00
029b624e96
When adding new wires due to directly-connected items, don't try and de-select them after an undo. The won't be around anymore.
...
Fixes: lp:1836218
* https://bugs.launchpad.net/kicad/+bug/1836218
2019-07-11 17:36:32 +01:00
cd1a1a67fb
Add seleciton/brightening/highlighting to images.
2019-07-10 01:14:28 +01:00
30ec895c96
Cleanup event processing stuff to keep better track of "handled".
...
See: https://lists.launchpad.net/kicad-developers/msg41471.html .
2019-07-09 21:59:46 +01:00
483dc24e87
Homogenize selection tools around our HIG.
...
In particular make addative and exclusive-or selections work the
same way.
Also give Highlight Net a hotkey now that it can't use ctrl-click
anymore.
2019-07-09 21:59:46 +01:00
36f1d023f0
Make sure Push/PopTool() go in the right order.
...
Because the pickers are called with an Activate()/Wait() pair, any
usurping tool gets in between the picker handling the cancel (due
to activation) and the picker client doing a PopTool(). The new
tool is therefore pushed before the old tool is popped.
Fixes: lp:1835907
* https://bugs.launchpad.net/kicad/+bug/1835907
2019-07-09 15:03:23 +01:00
46f47adebe
Update symbols after assigning different LIB_IDs.
...
Fixes: lp:1835612
* https://bugs.launchpad.net/kicad/+bug/1835612
2019-07-09 12:38:41 +01:00
3a8f32c380
Convert ShowEEschema to an ACTION so it can get a hotkey assignment.
...
Fixes: lp:1686010
* https://bugs.launchpad.net/kicad/+bug/1686010
2019-07-09 00:43:41 +01:00
d3d0bdbe17
Go back to rotating selection around center.
...
Fixes: lp:https://bugs.launchpad.net/kicad/+bug/1833371
* https://bugs.launchpad.net/kicad/+bug/https://bugs.launchpad.net/kicad/+bug/1833371
2019-07-09 00:14:32 +01:00
772dff7a01
Removed post-page-settings ZoomFitToScreen() calls.
...
Fixes: lp:1834608
* https://bugs.launchpad.net/kicad/+bug/1834608
2019-07-08 00:06:28 +01:00
a9c66e15ea
Common-ize EE_ACTIONS::refreshPreview and use it after cursor actions.
...
Fixes: lp:1818667
* https://bugs.launchpad.net/kicad/+bug/1818667
2019-07-05 14:45:15 +01:00
fffb0d340f
Eeschema: fix not deletable bitmap issue (missing SCH_BITMAP in deletable list).
...
Also display bitmap info in message panel.
Fixes: lp:1835125
https://bugs.launchpad.net/kicad/+bug/1835125
2019-07-05 10:25:23 +02:00
c715a22e1c
Symbol Editor: clear IS_NEW flag after placing a pin
...
IS_NEW flag needs to be cleared after a pin is placed, otherwise further
move operations will keep adding the pin to the edited symbol.
2019-07-03 13:32:47 +02:00
d03041b565
Cleanup.
2019-07-02 21:36:42 +01:00
9effd24f3a
Allow move tool to run on top of other tools.
...
Fixes: lp:1784480
* https://bugs.launchpad.net/kicad/+bug/1784480
2019-07-01 22:15:25 +01:00
ad26ece8d4
Add Global Edit Text and Graphics Properties to Eeschema.
...
Fixes: lp:1801150
* https://bugs.launchpad.net/kicad/+bug/1801150
2019-07-01 22:15:25 +01:00
5ed8ba5bf3
Libedit: fix a bug in edit graphic item properties:
...
When changing the common to units and/or common to convert options, the item properties were not updated.
2019-07-01 12:36:46 +02:00
d88bddad7e
Respect m_DrawSpecificUnit and m_DrawSpecificConvert when pasting.
...
Fixes: lp:1834719
* https://bugs.launchpad.net/kicad/+bug/1834719
2019-06-29 22:20:40 +01:00
09b07cd387
Minor adjustments to arc editing algorithms.
...
1) Don't snap center since it will be re-computed (most likely
off-grid) anyway.
2) Don't flip shape during initial drawing.
2019-06-29 20:03:08 +01:00
232e21cb37
Restore selection properly after an undo.
2019-06-29 20:03:08 +01:00
a498d7e9c5
Try out a new arc-editing paradigm for LibEdit.
...
This is based on the notion that in Kicad the start and end-points
are far more important (as they usually connect to other segments)
than the center is.
2019-06-29 16:10:58 +01:00
2ed3bf47bb
Improve hittesting for Eeschema and LibEdit delete tools.
2019-06-28 22:18:30 +01:00
a72b5416c3
Show preview object for Eeschema junction, noconnect and bus entry tools.
2019-06-28 22:18:30 +01:00
981072598b
Overhaul cursor code for new tool/action framework.
...
Includes the addition of an onSetCursor() handler which must be called
from both the GAL canvas AND the GAL backend (at least on OSX) to prevent
cursor flickering between (for instance) pencil and arrow.
Also includes new architecture for point editors which allows them to
coordiate cursors with the editing tools (so we can switch to an arrow
when over a point).
2019-06-27 22:37:11 +01:00
2f23aa9556
Implement a more robust tool stacking architecture.
...
We were running into various corner conditions where a tool's event
loop would exit while the tool was still active, or the tool would
get popped while we were still in the event loop. (A lot of these
had to do with the POINT_EDITOR's, but not all of them.)
The new architecture:
1) tools always do a Push()/Pop()
2) everyone is responsible for their own pops; no more stack-clearing
on a cancel
3) CancelInteractive events go to all tools to facilitate (2)
2019-06-27 17:01:31 +01:00
7208ef481f
Don't confuse a pasted pin with being synchronized.
...
It's only at the same location because it was copied from there.
Fixes: lp:1834377
* https://bugs.launchpad.net/kicad/+bug/1834377
2019-06-27 00:24:42 +01:00
5e40de9357
Clear IS_NEW flag after placing pin so the tool knows we're no longer drawing.
...
Fixes: lp:1834376
* https://bugs.launchpad.net/kicad/+bug/1834376
2019-06-27 00:02:13 +01:00
7292ce6a8b
Improve eeschema selection disambiguation logic.
2019-06-26 21:54:03 +01:00
c77d214c5f
Clear annotation of pasted sheets only when they already exist in the current hierarchy.
...
Fixes: lp:1833205
* https://bugs.launchpad.net/kicad/+bug/1833205
2019-06-26 21:54:03 +01:00
89d1d3d299
Real-time highlighting for PlEditor delete tool.
2019-06-25 21:10:21 +01:00
4eaba20cd3
Real-time highlighting for Pcbnew and ModEdit delete tools.
2019-06-25 21:10:21 +01:00
f9702aab87
Immediate actions for PlEditor, PcbNew, etc.
2019-06-25 11:34:28 +01:00
70ff2e14a5
Eeschema: avoid crashes when the tool highlight or delete is activated and clicking in a empty schematic.
...
Was a nullptr not tested.
2019-06-25 08:31:22 +02:00
39c2745f55
eeschema: Allow spaces in label names for multilabeling
...
This adds the functionality to add multiple labels to your schematic at
once by using spaces in the original label name.
Fixes: lp:1095113
* https://bugs.launchpad.net/kicad/+bug/1095113
2019-06-20 16:21:49 -07:00
485d436860
Clear ctx-menu before rebuilding; don't veto ctx-menu mousewarp for non-ctx-menu dialog.
...
Fixes: lp:1833312
* https://bugs.launchpad.net/kicad/+bug/1833312
2019-06-19 21:17:56 +01:00
4054d7ddf7
Don't try an intertwine deletion and junction fixup.
...
Fixes: lp:1833224
* https://bugs.launchpad.net/kicad/+bug/1833224
2019-06-19 19:30:38 +01:00
730b89af6d
Another round of changes for immediate actions.
2019-06-19 18:35:17 +01:00
3a0256aade
Add handle-based editing for eeschema bitmaps.
...
Also cleans out a bunch of duplicated functionality from the image
editor dialog.
Fixes: lp:1828722
* https://bugs.launchpad.net/kicad/+bug/1828722
2019-06-19 18:35:17 +01:00
e16bf40e60
eeschema: Insert junctions when repeating
...
This is the v6 analog to 697234dd5https://bugs.launchpad.net/kicad/+bug/1832253
2019-06-18 20:12:08 -07:00
b8dfc1f26a
Fix import sheet pin.
...
Fixes: lp:1829314
* https://bugs.launchpad.net/kicad/+bug/1829314
2019-06-18 22:44:22 +01:00
581b5257e1
One more try getting <ESC>/PopTool behaviour right.
2019-06-18 22:34:31 +01:00
b0c1c1ad2b
Select both ends of wires in block select.
...
Fixes: lp:1830717
* https://bugs.launchpad.net/kicad/+bug/1830717
2019-06-18 20:24:15 +01:00
dcbd897a95
Push/pop tools even when selected from the toolbar.
2019-06-18 20:24:15 +01:00
7dd247f1dc
Make better use of TOOL_EVENT parameters.
2019-06-18 20:24:15 +01:00
9e464f9f5b
Implement rollover highlighting for Eeschema delete tool.
2019-06-17 22:15:20 +01:00
7cfe19d9fd
Cleanup.
2019-06-17 22:15:20 +01:00
1f35ec5521
Beware of copying events and losing the m_passEvent flag.
...
Fixes: lp:1833031
* https://bugs.launchpad.net/kicad/+bug/1833031
2019-06-17 14:44:39 +01:00
5d7739a662
Handle '&'s in menu labels.
...
Fixes: lp:1832904
* https://bugs.launchpad.net/kicad/+bug/1832904
2019-06-17 10:45:23 +01:00
e6d5110ccf
Implement I18N for ACTIONs.
...
It's a bit of a hack because they're statically initialized and
so we can't make use of the _() macro. We do still want it in the
code, however, because the string harvesting is based off of it.
Fixes: lp:1833000
* https://bugs.launchpad.net/kicad/+bug/1833000
2019-06-17 10:45:23 +01:00
418bd28347
Fix build error.
2019-06-16 18:31:10 -04:00
dd3617cfda
Fix compile issue.
2019-06-16 22:46:35 +01:00
de67f3f1e9
Move a few more things to ACTIONs.
2019-06-16 19:53:30 +01:00
909aeba3d9
Transition some more stuff from the MVC view to the controller.
2019-06-16 19:53:30 +01:00
c7bfa9857e
Use more reflective naming of what the tool does.
2019-06-16 19:52:07 +01:00
e4fbd003e0
Make m_passEvent event-specific rather than global.
...
If a tool called something like clearSelection while processing a
MOUSE_CLICK, the SELECTION_TOOL will pass the clearSelection
COMMAND_EVENT because it handles it as a transition, not as an
event. Because m_passEvent is effectively global, the tool manager
would then interpret that as passing the MOUSE_CLICK and we'd end
up processing the click by multiple tools.
2019-06-16 12:06:49 +01:00
6a8e69f9c9
Fix a compil warning.
2019-06-16 09:12:32 +02:00
0f4bdbd184
Tighten down the POINT_EDITORs a bit more.
2019-06-16 01:33:39 +01:00
18ebced8f4
Code hygiene.
2019-06-15 20:43:52 +01:00
19aba615c2
Remove selection condition from conditional menu separators.
...
We don't allow duplicate separators anyway so all they really do
is complicate the code.
2019-06-15 20:43:51 +01:00
5610261dce
Immediate-action hotkeys (and context menu actions) for eeschema.
2019-06-15 20:43:51 +01:00
83ee51370c
Cancel interactive editing when switching sheets.
...
Fixes: lp:1819278
* https://bugs.launchpad.net/kicad/+bug/1819278
2019-06-14 16:54:46 +01:00
7d69a917b9
Fixed a crash in EE_SELECTION_TOOL::SelectPoint()
...
The for loop is continued after an item removal, so the removed item
is not accessed anymore.
2019-06-14 13:00:39 +02:00
8cc1e2b5e7
Fix breakage in wire moving/dragging/etc.
...
Fixes: lp:1832750
* https://bugs.launchpad.net/kicad/+bug/1832750
2019-06-13 19:58:37 +01:00
8f84c3ec4f
Grid rid of GetCanvas/GetGalCanvas distinction now that there's only gal.
2019-06-13 19:58:37 +01:00
ce1f35a1be
Cleanup some left-over vestiages of the legacy canvas architecture.
2019-06-13 15:51:32 +01:00
4043a15482
When pasting a sheet link to existing copy if it already appears in the hierarchy.
...
Fixes: lp:1830633
* https://bugs.launchpad.net/kicad/+bug/1830633
2019-06-13 15:51:32 +01:00
c0e1f7a17a
Add dragging of wire ends, corners and junctions.
...
Fixes: lp:1830007
* https://bugs.launchpad.net/kicad/+bug/1830007
2019-06-11 21:20:19 +01:00
b1b7408cf2
Accidentally checked in some debugging stuff.
2019-06-11 18:53:36 +01:00
7726b039b2
Re-jigger standard submenus so they both link AND work.
2019-06-11 18:03:16 +01:00
05652d4787
Rework the preparation for eeschema's move-tool.
...
There are a whole bunch of cases which all have to work:
regular move
move followed by drag
drag followed by move
move followed by duplicate
duplicate
paste
and all both with and without Warp Mouse on Move checked.
2019-06-11 18:03:16 +01:00
e4d16abcbd
Fix overly-generic flag test when synchronizing pins.
...
Fixes: lp:1832170
* https://bugs.launchpad.net/kicad/+bug/1832170
2019-06-11 09:29:30 +01:00
09a3c5b280
Update pasted items' parent pointers.
...
Fixes crashes when trying to manipulate the item after the paste,
and weird redraw behaviour with pins.
Fixes: lp:1832178
* https://bugs.launchpad.net/kicad/+bug/1832178
2019-06-11 09:22:56 +01:00
6623ab91a8
Fix issue with picker tool activation.
2019-06-11 00:25:38 +01:00
e9017ce0b1
Update status bar when selected items are modified.
...
Fixes: lp:1831801
* https://bugs.launchpad.net/kicad/+bug/1831801
2019-06-10 23:46:01 +01:00
a568e70b99
Follow naming conventions.
2019-06-10 23:46:01 +01:00
5e49517781
Move hotkeys to ACTION architecture.
2019-06-10 23:46:00 +01:00
765606012f
Convert separate-compilation of selection.cpp to polymorphism.
2019-06-10 23:46:00 +01:00
e606587ff6
Move remaining Symbol Tree ctx menu cmds to ACTIONS.
...
Also moves the various Player instantiators down into COMMON_TOOLS
for better sharing.
2019-06-10 23:46:00 +01:00
b9927a0655
Don't put standard menu items into symbol tree context menu.
2019-06-05 23:33:15 +01:00
469fc3b572
Finish moving symbol editor tree context menu to ACTIONs.
2019-06-05 23:29:59 +01:00
2d40425e4d
Move footprint & symbol tree context menus to tool infrastructure.
...
Fixes: lp:1831692
* https://bugs.launchpad.net/kicad/+bug/1831692
2019-06-05 20:16:48 +01:00
1ea5b04e22
More ACTIONS work. Nearly done now.
2019-06-04 22:31:42 +01:00
1721cc1700
Ensure pasted sheets get parents set properly for screen discovery
...
Fixes: lp:1831460
* https://bugs.launchpad.net/kicad/+bug/1831460
2019-06-03 20:30:35 -04:00
1bf04d1722
More ACTIONs work.
2019-06-04 00:51:16 +01:00
568c8c336b
Move DRC control to a tool; move assorted commands to ACTIONS.
2019-06-03 21:08:30 +01:00
9f1e2e34b7
Move some dupicated tools to common tools.
2019-06-03 21:08:30 +01:00
33773bad4d
Yet more command conversions to ACTIONs.
2019-06-02 21:10:56 +01:00
dfc2fe3929
Don't try to post-process an empty clipboard paste.
...
Fixes: lp:1831364
* https://bugs.launchpad.net/kicad/+bug/1831364
2019-06-02 16:21:44 +01:00
7f1ed30ff5
Move DeMorgan handling to ACTIONs.
2019-06-01 23:03:24 +01:00
39b91c90dd
Moved more operations to ACTIONs.
2019-06-01 23:03:24 +01:00
3777c5270b
Move some more Eeschema operations to ACTIONs.
2019-06-01 16:29:12 +01:00
f1076c0f48
Fix missing reference keeping history from getting saved.
...
Fixes: lp:1830185
* https://bugs.launchpad.net/kicad/+bug/1830185
2019-05-31 23:38:15 +01:00
c7fa5c567f
Load sheet content after a paste.
...
Fixes: lp:1830633
* https://bugs.launchpad.net/kicad/+bug/1830633
2019-05-31 23:38:15 +01:00
1dd1ddf83b
Try an "add wires" strategy instead of trying to figure out what to pick up and what to anchor.
...
Fixes: lp:1831199
* https://bugs.launchpad.net/kicad/+bug/1831199
2019-05-31 21:56:35 +01:00
d7774b94fc
Fix regression with switching between drag and move operation.
2019-05-31 21:56:35 +01:00
ead1914b1d
Don't autopan until mouse moves.
2019-05-31 21:55:30 +01:00
d2daab808c
Remove some legacy cursor handling stuff.
2019-05-31 21:54:22 +01:00
4842c73530
Fix minor compil warnings.
2019-05-31 21:38:30 +02:00
0260b32125
Push resetLocalCoords down into COMMON_TOOLS.
...
Fixes: lp:1830693
* https://bugs.launchpad.net/kicad/+bug/1830693
2019-05-29 00:26:29 +01:00
db90e97d0b
fixup! Implement undo for Page Settings in PlEditor, Eeschema and PCBNew.
2019-05-27 14:12:20 +01:00
d24a2afaca
Fix duplicate to work like paste to keep pins from getting duplicated.
...
Also fixes the post-duplicate move to start at the cursor pos.
Also fixes the fact that duplicate wasn't getting its hotkey.
Fixes: lp:1830596
* https://bugs.launchpad.net/kicad/+bug/1830596
2019-05-27 11:58:56 +01:00
800cc1a11c
Fix intial drag point for paste in LibEdit.
2019-05-27 11:58:56 +01:00
e9e28b9aac
Retire legacy block architecture.
2019-05-27 11:58:56 +01:00
927d2a645c
Move LibEdit Save operations to ACTIONS.
2019-05-27 11:58:55 +01:00
6936effaa7
Implement undo for Page Settings in PlEditor, Eeschema and PCBNew.
...
Fixes: lp:1820059
* https://bugs.launchpad.net/kicad/+bug/1820059
2019-05-27 11:58:55 +01:00
568d4e2b19
Avoid including id.h in a lot of files that do not use it.
2019-05-26 08:14:25 +02:00
b8e2054b23
Activate context menu in LIB_VIEW_FRAME canvas.
2019-05-25 10:13:27 +02:00
a3dfce5adb
Implement common file menu actions and move Eeschema over.
2019-05-25 01:14:21 +01:00
85f984ccd9
Add point-editor activation for immediate-mode drawing.
2019-05-24 19:49:09 +01:00
323bb0f8e1
Moving PageLayout editor to GAL canvas and modern toolset.
2019-05-24 19:49:09 +01:00
43a5bb72ca
Fix swapped mirror icons in eeschema context menu
...
Fixes: lp:1828631
* https://bugs.launchpad.net/kicad/+bug/1828631
2019-05-24 13:12:58 -04:00
ab3ada5200
Clear moving flag for second-click-placed items
...
Fixes: lp:1830227
* https://bugs.launchpad.net/kicad/+bug/1830227
2019-05-23 21:51:14 -04:00
ebd8c44eee
Don't confuse SCH_ITEMs and LIB_ITEMs.
...
Fixes: lp:1829826
* https://bugs.launchpad.net/kicad/+bug/1829826
2019-05-23 22:57:53 +01:00
872c8ca37b
Remove a duplicate icon.
2019-05-23 16:21:06 +02:00
e1f6230e8c
Do not statically construct wxTimer
...
If you construct wxTimer statically, it will be constructed
before WX init, which means you might get assertions about
missing m_impl's within the timer class.
The solution is to construct the wxTimer at run time. In this
case, static within the function will be constructed only after
the function is called (and actually the scope only needed to be
this function anyway).
2019-05-23 11:28:11 +01:00
0047f88f82
Mark unfold bus menu as clean so it doesn't get generated a second time.
...
Fixes: lp:1829878
* https://bugs.launchpad.net/kicad/+bug/1829878
2019-05-23 00:27:53 +01:00
1636405b66
Set a reference point for all selection sizes.
...
Fixes: lp:1829833
* https://bugs.launchpad.net/kicad/+bug/1829833
2019-05-23 00:27:53 +01:00
ecb81426a4
eemodern: fixed use-after-free in SCH_DRAWING_TOOLS::DrawSheet().
2019-05-23 00:28:58 +02:00
323ecada8d
Generate refresh preview events when objects are moving.
...
Fixes: lp:1829683
* https://bugs.launchpad.net/kicad/+bug/1829683
2019-05-22 21:48:04 +01:00
fbffb9ae1e
Don't put KICAD_T arrays on stack and expect them to be there when you need them.
...
Fixes: lp:1829748
* https://bugs.launchpad.net/kicad/+bug/1829748
2019-05-22 21:48:04 +01:00
67f7571f04
Don't call VIEW::Redraw() from within the tool.
...
Fixes: lp:1828824
* https://bugs.launchpad.net/kicad/+bug/1828824
2019-05-22 21:48:04 +01:00
67cc2aac2e
Rework Eeschema find/replace for modern toolset.
...
Fixes: lp:1827274
* https://bugs.launchpad.net/kicad/+bug/1827274
Fixes: lp:1827240
* https://bugs.launchpad.net/kicad/+bug/1827240
2019-05-22 21:48:04 +01:00
2b38b23a5e
eemodern: fixed use-after-free crash in LIB_EDIT_TOOL::DoDelete()
2019-05-22 21:35:03 +02:00
f18807ea0f
Eeschema: Ensure axis are always drawn in libedit and viewlib
...
Fixes: lp:1822408
https://bugs.launchpad.net/kicad/+bug/1822408
2019-05-22 10:04:34 +02:00
e1373d70ae
libedit: Ensure proper dereference in shared tools
...
Fixes: lp:1829826
* https://bugs.launchpad.net/kicad/+bug/1829826
2019-05-21 19:43:15 -07:00
bc52f0a03b
eemodern: clean printf debug gibberish, implement inline drag, move & cursor warp/reference point options
2019-05-20 21:04:46 +02:00
af30eca3cb
eemodern: hover selection should autoclear after invoking properties dialog
2019-05-20 21:04:46 +02:00
aff3243f3b
eeschema: fix use-after-free crash in GetScreen()/GetCurrentSheet()
2019-05-20 21:04:46 +02:00
034669bf30
eemodern: implement drag-related settings in the Preferences window
2019-05-20 21:04:46 +02:00
5ea46e8b78
eemodern: initial attempt at inline drag/move actions
2019-05-20 21:04:46 +02:00
813de6a1f3
Implement brightening for Eeschema Find/Replace.
2019-05-18 14:28:22 +01:00
21a7621ddb
Fix issues with multiple M or G commands in a row.
2019-05-18 14:11:19 +01:00
952108dd43
Implement SCH_SHEET_PIN selection, rotation and mirroring.
...
Fixes: lp:1829521
* https://bugs.launchpad.net/kicad/+bug/1829521
2019-05-18 00:23:12 +01:00
5f851a4bad
Add AutoplaceFields to symbol tool context menu.
2019-05-18 00:21:49 +01:00
7c25001622
Implement immediate actions for adding and importing sheet pins.
...
Fixes: lp:1829314
* https://bugs.launchpad.net/kicad/+bug/1829314
2019-05-18 00:21:49 +01:00
6b3fe33d6f
Improve selection logic for sloppy selections.
2019-05-17 00:48:39 +01:00
5dd71b5563
Disable pin table and part properties when there's no part.
...
Fixes: lp:1828962
* https://bugs.launchpad.net/kicad/+bug/1828962
2019-05-16 23:53:33 +01:00
68224e0fcd
Don't double-add pins to parent part when pasting.
...
Also adds undo to paste operations in LibEdit.
Fixes: lp:1829355
* https://bugs.launchpad.net/kicad/+bug/1829355
2019-05-16 23:53:11 +01:00
0dd1584394
Add import-sheet-pin error message and move messages to status popups.
...
Fixes: lp:1829314
* https://bugs.launchpad.net/kicad/+bug/1829314
2019-05-16 23:11:22 +01:00
6630a7227d
Constrain SHEET_PIN movement, and keep them attached when resizing SHEET.
...
Fixes: lp:1829314
* https://bugs.launchpad.net/kicad/+bug/1829314
2019-05-16 22:36:19 +01:00
fbb807f3bb
Move some more menu & toolbar items to modern toolset.
2019-05-16 19:57:06 +01:00
eba892009d
Improve hit-test logic by gradually increasing threshold.
...
Fixes: lp:1828222
* https://bugs.launchpad.net/kicad/+bug/1828222
2019-05-16 19:57:05 +01:00
69afa27a5f
Implement ACTION_TOOLBAR and update some of the menus to ACTION_MENU.
...
This gives us better separation of MVC in line with the design of
the modern toolset. It also reduces a whole bunch of duplicated
data.
2019-05-15 17:50:52 +01:00
f9e4ee1fc9
CONTEXT_MENU -> ACTION_MENU. (Now used for menu-bar menus too.)
2019-05-15 17:50:52 +01:00
e850592587
Cleanup.
2019-05-15 17:50:52 +01:00
ef5c69167a
Start moving some LibEdit and SchEdit menubar menus to actions.
...
Also includes a bunch of bug fixes that got intermingled.
Fixes: lp:1828826
* https://bugs.launchpad.net/kicad/+bug/1828826
Fixes: lp:1828826
* https://bugs.launchpad.net/kicad/+bug/1828826
Fixes: lp:1828793
* https://bugs.launchpad.net/kicad/+bug/1828793
2019-05-13 21:44:29 +01:00
d290154dd3
Fix rectangle resizing in LibEdit.
...
Fixes: lp:1828791
* https://bugs.launchpad.net/kicad/+bug/1828791
2019-05-13 21:44:29 +01:00
924a5e68f0
Fix missing superclass call.
2019-05-12 18:20:41 +01:00
25209516a6
Adjust net highlighting after edits.
...
Fixes: lp:1800291
* https://bugs.launchpad.net/kicad/+bug/1800291
2019-05-12 18:20:41 +01:00
f602ccd814
Insert EE_TOOL_BASE under SchEdit and LibEdit tools, and fix errant rename scope which clobbered PCBNew's PICKER_TOOL.
2019-05-12 13:47:08 +01:00
5c39521149
Move Symbol Properties and Pin Table to actions.
...
Fixes: lp:1804273
* https://bugs.launchpad.net/kicad/+bug/1804273
2019-05-11 15:38:49 +01:00
7995b5cc3c
Restore selection on abort and undo/redo.
...
Also includes a related bug fix to not create an undo record for
the initial schematic cleanup.
Fixes: lp:1825975
* https://bugs.launchpad.net/kicad/+bug/1825975
2019-05-11 15:38:49 +01:00
76a915d472
Fix highlighting when initiated via ctrl-click.
...
Fixes: lp:1796755
* https://bugs.launchpad.net/kicad/+bug/1796755
2019-05-11 15:38:49 +01:00
0a308c4584
Fix minor compil warnings
2019-05-11 11:12:39 +02:00
792c4328aa
Cleanup.
2019-05-10 21:40:08 +01:00
a9f663d5ef
Soften hit-testing in SchEdit and LibEdit a bit.
...
Old threshold was 0; new is 5 pixels.
2019-05-10 20:46:28 +01:00
0c2ba94b16
More sharing between SchEdit and LibEdit.
2019-05-10 20:22:26 +01:00
86d1592777
Fix bug with re-enting selection main loop.
2019-05-10 19:56:20 +01:00
c1539ae014
Naming changes to reflect sharing between SchEdit and LibEdit.
2019-05-10 19:56:20 +01:00
f3c95ad83c
Clean up the RepeatItem architecture and finish deleting the UndoItem facility.
2019-05-10 19:56:20 +01:00
7da2631b27
Check item before concluding that ConvertText has run.
...
Otherwise we set item from nullptr back to the selection, and then
we think we're dragging again which causes all kinds of grief.
Fixes: lp:1828067
* https://bugs.launchpad.net/kicad/+bug/1828067
2019-05-10 16:11:57 +01:00
f6e07f575a
Rename for clarity.
...
SetOffset() didn't set anything; it performed an action.
Move() suggests a delta, when it in fact does a SetPosition().
2019-05-10 16:11:57 +01:00
ea0941cab3
Implement modern tools for LibEdit.
2019-05-10 16:11:57 +01:00
40f41133b3
Move Circle, Arc, Rectangle and PolyLine tools to modern toolset.
2019-05-10 16:11:57 +01:00
589a37bfe8
eeschema: Don't segfault on empty drawlist
2019-05-09 15:11:36 -07:00
0e5f5d37d1
eeschema: Fix sign error in comparison
2019-05-09 14:10:53 -07:00
2f782ac7a4
eeschema: Prevent double-commit on duplicate/copy
...
When activating the move from a drag extension, we need to add
additional components to the commit. This breaks for duplicate/copy
when we have already added the correct components
2019-05-09 13:46:35 -07:00
c716d66e53
Fix typo
2019-05-08 14:28:31 +02:00
a40367ce17
Add a wire between direct-connect items when only is being dragged.
...
Fixes: lp:1798968
* https://bugs.launchpad.net/kicad/+bug/1798968
2019-05-07 20:39:46 +01:00
469231ae15
Move Pin, Symbol Text and Symbol Anchor to modern toolset.
2019-05-07 20:39:46 +01:00
cf046e0548
Anchor a selected wire at the edge of a drag which is connected to a non-drag item.
...
Fixes: lp:1827846
* https://bugs.launchpad.net/kicad/+bug/1827846
2019-05-07 12:04:19 +01:00
f40408187e
A couple of temp hacks for LibEdit <esc> processing while in transition.
...
Fixes: lp:1828004
* https://bugs.launchpad.net/kicad/+bug/1828004
2019-05-07 12:04:19 +01:00
2097411550
Refresh RequestSelection selection if all items were filtered out.
...
If you have, for instance a pin selected and do a cmd-E we'll filter
out the pin and then do nothing. We should instead treat it as a
hover selection if everything got filtered.
2019-05-07 12:04:19 +01:00
f1a38a6d41
Respond to <esc> from selection tool.
...
Fixes: lp:1827917
* https://bugs.launchpad.net/kicad/+bug/1827917
2019-05-06 21:56:19 +01:00
cd2bd23c37
Fix a bunch of issues with hotkeys, IDs and event processing.
...
Fixes: lp:1827894
* https://bugs.launchpad.net/kicad/+bug/1827894
2019-05-06 21:42:00 +01:00
e5151ed639
Use parent's transform when moving SCH_FIELDs.
...
Fixes: lp:1827873
* https://bugs.launchpad.net/kicad/+bug/1827873
2019-05-06 21:41:44 +01:00
a76bcc204f
Use parent's transform when moving SCH_FIELDs.
...
Fixes: lp:1827873
* https://bugs.launchpad.net/kicad/+bug/1827873
2019-05-06 16:59:23 +01:00
b97d65e791
Fix crash bug when deleting sheet pin and disappearing bug when moving them.
...
Fixes: lp:1827890
* https://bugs.launchpad.net/kicad/+bug/1827890
2019-05-06 16:31:02 +01:00
d12eee9c98
Process new sheets after drawing.
2019-05-06 15:31:23 +01:00
207900e4f9
Move libedit message panel updating to the Inspection Tool.
2019-05-06 15:31:23 +01:00
a12d769074
Code clarification and commenting.
...
Also renames toolbar files to reduce confusion with the modern toolset
tool files.
2019-05-06 15:31:23 +01:00
f87d371b8b
Move to shared COLLECTORS for sch and lib.
2019-05-06 15:31:23 +01:00
49231ac08f
Fix missing event processing for Leave Sheet button in toolbar.
2019-05-06 03:30:51 +01:00
b7e67073ef
Fix bugs in bus unfold logic.
...
The worst of which left you in the bus unfold popup menu event loop
if you cancelled the menu by clicking outside it.
2019-05-05 19:48:11 +01:00
0b2e1d00ea
Don't allow motion between two clicks of a dblclick to spoil forceHV.
2019-05-05 18:38:49 +01:00
d881f4b21f
When unfolding a bus from the selection tool, stay in that tool.
2019-05-05 18:36:18 +01:00
c4fac81dbb
Transition from bus to wire tool when unfolding bus.
2019-05-05 17:14:30 +01:00
a42a4b0b52
Implement immediate bus unfold and add bus unfold to selection context menu.
2019-05-05 17:14:30 +01:00
fd546da640
Homogenize hit testing and selection return types.
...
Prep work for sharing SCH_SELECTION_TOOL with LibEdit.
2019-05-05 17:14:30 +01:00
2d28ab7dd2
More cleanup.
2019-05-05 17:14:30 +01:00
32765ebffd
Do some refactoring in prep for sharing some sch tools with libedit.
2019-05-05 17:14:30 +01:00
ed0e6af66d
Move to direct tool registration.
...
It was confusing that the primary frames registered their tools
differently than the other frames. In addition, since the other
frames also added their own tools, foo_actions::RegisterAllTools()
didn't really register all tool but rather those used by the
principal frame (PCB_EDIT_FRAME, SCH_EDIT_FRAME, etc.)
2019-05-05 17:14:30 +01:00
dd9c426922
Cleanup a TODO.
2019-05-05 17:14:30 +01:00
b5fd7b9842
Move Leave Sheet to the top of the context menu.
2019-05-05 17:14:30 +01:00
7e3ad4585a
Fix issues with dragging, moving and rotating wires.
2019-05-05 17:14:30 +01:00
2edb09e583
Double click action should enter sheet.
2019-05-05 17:14:30 +01:00
4ccfa17ff9
Fix bugs in sheet duplicate & copy/paste.
...
Don't edit sheet during AddToScreenAndUndoList() call. If it's
cancelled and we delete the item, callers will still own pointers
to the freed memory. Do it in New and Paste instead.
2019-05-05 17:14:30 +01:00
a825cdfa5a
Fix new image drawing issue.
2019-05-05 17:14:30 +01:00
bcdc3ad90a
Set IS_NEW flag on new images. And a bunch of cleanup of dead code.
2019-05-05 17:14:30 +01:00
21b315f2af
Finish removing GetCurItem() from eeschema.
2019-05-05 17:14:30 +01:00
6e695aac25
Move bus unfold and symbol unit selection to modern toolkit.
2019-05-05 17:14:30 +01:00
f4b92e6acf
Refactor as SCH_DRAWING_TOOL was getting too big.
2019-05-05 17:14:30 +01:00
2774af928a
Remove extra Show Datasheet menu item.
2019-05-05 17:14:30 +01:00
20b63174dc
Support wire & bus drawing from selection tool.
2019-05-05 17:14:30 +01:00
f95f202f81
Restore Jon's change which I accidentally nuked.
2019-05-05 17:14:30 +01:00
4ca0f4da10
Fixes to the context menu logic around wire/bus drawing.
2019-05-05 17:14:30 +01:00
7273748c57
Context menu cleanup for eeschema modern toolset.
2019-05-05 17:14:30 +01:00
90a663facd
Implement sheet cleanup in modern toolset.
2019-05-05 17:14:30 +01:00
1e5334f5d4
Implement DeMorgan conversions in modern toolset.
2019-05-05 17:14:30 +01:00
29f1787af2
Logic improvements and fixes for wire segment selection states.
2019-05-05 17:14:30 +01:00
c09817e08c
Context menus for labels.
2019-05-05 17:14:30 +01:00
0ea156042b
Fix over-zealous wire-grabbing for drag.
2019-05-05 17:14:30 +01:00
a61bbea4bd
Fix issue with selection being inadvertantly cleared via ClearFlags().
...
Also fixes an undo bug when pick-component-rotate-place-undo.
2019-05-05 17:14:30 +01:00
58ba573038
Handle cascading selections in placement.
...
See https://forum.kicad.info/t/call-for-testers-eemodern/16663/32
2019-05-05 17:14:29 +01:00
e9dd8542d1
Allow user to change from move to drag and vice versa.
...
Also fixes bugs when doing a duplicate in the middle of a move.
2019-05-05 17:14:29 +01:00
0af7c87277
Add resize sheet to context menus. Fix bugs in it.
...
Also assign a bunch of icons that were missing.
2019-05-05 17:14:29 +01:00
bbd8659f69
Implement explicit cross-probing (mainly for sheets which are too slow to do automatically).
...
Also moves the message panel updaters to SCH_INSPECTION_TOOL.
2019-05-05 17:14:29 +01:00
588d13a912
Fix gcc issue with temp variable and move some collection specs.
...
Having the collection specs localized with their code improves
encapsulation.
(Thanks to crasic for the original patch.)
2019-05-05 17:14:29 +01:00
35e8a340ca
Add enter/leave sheet to modern toolset.
2019-05-05 17:14:29 +01:00
423d430b58
Replace deleteNode and deleteConnection with selectNode and selectConnection.
2019-05-05 17:14:29 +01:00
1ff7869ec3
Move Edit with Symbol Editor to modern toolset context menu.
2019-05-05 17:12:59 +01:00
f81007f74b
Some clean-up and moving message panel update to selection event.
2019-05-05 17:12:59 +01:00
2244dcd567
Move show datasheet to SCH_INSPECTOR_TOOL and add show marker info.
2019-05-05 17:12:59 +01:00
902be18a04
More modern toolset context menu work.
...
Text/label type changes and bus entry shape changes. And some
context menu bug fixing.
2019-05-05 17:12:59 +01:00
ddbd92c274
Add some more context menu stuff to eeschema modern toolset.
2019-05-05 17:12:59 +01:00
f2474d074b
Clean out stuff that's already been moved.
2019-05-05 17:12:59 +01:00
42383ae871
Build out some of the modern toolkit context menus.
2019-05-05 17:12:59 +01:00
da988428cf
Add modern toolset cut/copy/paste. They now use the system clipboard.
2019-05-05 17:12:59 +01:00
2bd4a1b58c
Implement properties dialogs in modern toolset.
2019-05-05 17:12:59 +01:00
9e2bbcb8b6
Clean up delete and fix bug with juctions getting double-deleted.
2019-05-05 17:12:59 +01:00
de347998d1
Implement drag in modern toolset.
2019-05-05 17:12:59 +01:00
eacc3e67a5
Implement repeatDrawItem in modern toolkit and fix bugs.
...
Fixes moving of SCH_FIELDS.
Fixes undo operations around SCH_FIELDS and SCH_PINS.
2019-05-05 17:12:59 +01:00
4e0208dfba
Move duplicate item and block to modern toolset.
2019-05-05 17:12:59 +01:00
a80f7432b7
Update dangling ends when dragging block.
2019-05-05 17:12:59 +01:00
1c8461bec7
Transition mirroring to modern toolset.
2019-05-05 17:12:59 +01:00
f200c61897
Start transitioning block operations to modern toolset.
2019-05-05 17:12:59 +01:00
e0ada1379f
Allow clearing PcbNew highlight through cross-probing
...
Fixes: lp:1821486
* https://bugs.launchpad.net/kicad/+bug/1821486
2019-05-04 16:18:51 -04:00
cbc8faf49b
Restore start segment behavior to unfold bus action
...
This must have gotten lost in the move
Fixes: lp:1826682
* https://bugs.launchpad.net/kicad/+bug/1826682
2019-05-01 21:03:30 -04:00
c054944d67
Set real-time connectivity to on by default with a safety valve
2019-04-29 18:59:32 -04:00
3aaba79b87
Fix crash when unfolding bus.
...
Thanks to Julien Faucher for the investigation into the problem.
2019-04-28 18:41:17 +01:00
f9dd1324da
Cleanup problems with fighting event loops.
2019-04-25 22:58:58 +01:00
8049c07a34
Add filtering to RequestSelection().
2019-04-25 22:58:58 +01:00
e476cfcec5
Move SPICE tools to modern framework.
2019-04-25 22:58:58 +01:00
5e556f0c6a
Fix segfault when finishing a wire at a connection point.
2019-04-24 14:43:10 +01:00
e046e8f593
Fix crash when <esc>ing from Hierarchical Sheet drawing tool.
2019-04-24 13:43:46 +01:00
d281f051ed
Move eeschema delete tool to modern toolset.
2019-04-23 14:19:55 +01:00
a967adbf26
Don't toggle selection twice when trying to select.
...
Also fixes issues with trying to use a CONTEXT_MENU as a wxMenu.
2019-04-23 14:19:55 +01:00
b6674e3bcb
Prevent segfault when running selection disambiguation menu.
2019-04-23 10:59:07 +01:00
b03e9061ff
Have another go at fixing 'w' command when wire tool is already active.
2019-04-23 00:11:26 +01:00
f6d0166584
Don't exit wire tool at end of wire.
...
Fixes: lp:1825871
* https://bugs.launchpad.net/kicad/+bug/1825871
2019-04-22 22:13:47 +01:00
1a007c3e4b
Implement SCH_SELECTION_TOOL (but still with legacy semantics).
2019-04-22 22:08:18 +01:00
8e812c012d
Second activation of wire or bus tool should start drawing.
...
Fixes: lp:1825871
* https://bugs.launchpad.net/kicad/+bug/1825871
2019-04-22 22:08:18 +01:00
64ba866146
Fix ignoreMouseEvents getting stuck in drawing tool.
...
Fixes: lp:1825613
* https://bugs.launchpad.net/kicad/+bug/1825613
2019-04-22 09:32:57 +01:00
6e8dd598c0
Minor fixes in translatable strings. Fix also a minor compil warning.
2019-04-22 09:34:28 +02:00
ed4c9f7ddb
Use format string for composed strings
...
Some translations may need this.
2019-04-20 22:01:43 +01:00
f2d9887409
Make usage of BRIGHTENED consistent (m_Flags, not m_Status).
2019-04-19 17:19:41 +01:00
e9c1cd2371
Fix duplicate hotkeys.
2019-04-19 01:07:36 +01:00
d88126e519
Tidy up and fix end sheet command.
2019-04-19 01:00:54 +01:00
f274e0f68b
Move some more immediate actions to modern toolset.
2019-04-19 00:42:50 +01:00
cc18464f8f
Move sheet drawing and resizing to modern toolset and fix some bugs.
...
Fixes: lp:1825204
* https://bugs.launchpad.net/kicad/+bug/1825204
2019-04-18 18:19:12 +01:00
0772b54845
Move eeschema zoom-selection to modern toolset.
...
Fixes: lp:1825164
* https://bugs.launchpad.net/kicad/+bug/1825164
2019-04-17 21:49:50 +01:00
c88fd514a0
Implement drawing tools in modern toolset.
...
Fixes: lp:1825192
* https://bugs.launchpad.net/kicad/+bug/1825192
2019-04-17 21:49:50 +01:00
460909ea9a
Move click-to-place tools to modern toolset.
2019-04-16 16:20:52 +01:00
ecfa05e2ca
Allow adding symbols/footprints from editors and browsers.
...
This was always possible from modal browsers and from the footprint
editor, but it's now also possible from non-modal browsers and the
symbol editor.
Fixes: lp:920380
* https://bugs.launchpad.net/kicad/+bug/920380
2019-04-16 16:20:51 +01:00
32c86a4ca4
Move place symbol to modern toolset.
2019-04-16 16:20:51 +01:00
b63fab92cf
Move Eeschema net highlighting to modern toolset.
2019-04-14 12:10:48 +01:00
94a948fdd1
Move grid selection for both Eeschema and Pcbnew to COMMON_TOOLS.
2019-04-13 18:43:35 +01:00
fc7f5630c7
Move eeschema zoom operations to modern toolset.
2019-04-13 18:43:26 +01:00
Wayne Stambaugh
Jeff Young
Jon Evans
jean-pierre charras
Roberto Fernandez Bautista
Ian McInerney
Mikolaj Wielgus
PJM
Jonathan Haas
Seth Hillbrand
Marek Roszko
James Jackson
Michael Kavanagh
david-beinder
Slawomir Siudym
Peter Montgomery
Werni
Franck Jullien
Franck Jullien
bjpiccioni
Alexander
Simon Richter
Seth Hillbrand
Alexander Shuklin
Maciej Suminski
John Beard
Tomasz Włostowski