Also move courtyard testing flags to BoardSettings API. Both are
still stored in the config until we decide where they go in order
to prevent prematurely disturbing the board file format.
Fixes: lp:684067
* https://bugs.launchpad.net/kicad/+bug/684067
(cherry picked from commit 5399f60)
... and GetMsgPanelInfo.
Step 4 in the g_UserUnit eradication effort.
Also removes a couple of conversion routines that were close
enough to extinction.
(cherry picked from commit c75da51)
This not only reduces the number of different mechanisms, but
will also reduce (yet again) the number of Clarify Selection
pop-ups (because the CLIENT_SELECTION_FILTER runs before the
pop-up, while SanitizePads ran after it).
Fixes: lp:1710451
* https://bugs.launchpad.net/kicad/+bug/1710451
(cherry picked from commit e50a993)
Work around wxWidgets failure to send first key through validator.
Unify treatment of INDETERMINATE values (such as for multiple
selections with mixed values).
(cherry picked from commit 7308729)
Allow copy of a single cell demarcated by the grid cursor.
Paste of lib_table s-expressions should always start at 0,0.
Let caller or specialized sub-class do auto-sizing; don’t
do it from within the base GRID_TRICKS.
Don’t start GRID_TRICKS menu IDs at -1; wxWidgets doesn’t
like it when you get to 0.
Add column visibility menu.
(cherry picked from commit e5071ed)
It's time to fix the focus issues. This adds a new SetInitialFocus()
routine to DIALOG_SHIM which will need to be called from a lot of
dialogs.
(cherry picked from commit 6d9647a)
The general idea is to support user-units inheritance. The
UNIT_BINDER allows wrapped controls to inherit units from their
parent dialog, while KEYWAY_HOLDER and DIALOG_SHIM allow child
KEYWAY_HOLDERs or DIALOG_SHIMs to inherit units from their
parent.
The GetUserUnits() method signature has to move to KEYWAY_HOLDER
rather than KEYWAY_PLAYER (where it makes more sense) as it’s the
only common ancestor of KEYWAY_PLAYER and DIALOG_SHIM.
As long as we'll be using the UNIT_BINDER more widely, it also
makes sense to move evaluation and validation into it.
This commit also provides eeschema’s DIALOG_LABEL_EDITOR and
pcbnew’s DIALOG_TRACK_VIA_PROPERTIES and DIALOG_SET_GRID as
models of how to use the new user-units inheritance, eval, and
validation.
Fixes: lp:593795
* https://bugs.launchpad.net/kicad/+bug/593795
(cherry picked from commit c8bc53e)
Step 1 of the g_UserUnit global eradication. This commit includes
basic hookup of hotkeys, units tool-buttons and grid dialogs.
(cherry picked from commit e0500ab)
Also makes better use of space to significantly increase number
of markers shown.
Fixes: lp:1748676
* https://bugs.launchpad.net/kicad/+bug/1748676
(cherry picked from commit a1d8097)
The old item pointers (which aren't safe to keep around) were
removed in favour of opaque references (void*) which are then
compared against existing items when needed.
Also improves brightening by brightening the whole footprint
(ie: its pads, drawings, reference and value) rather than just
its target cross.
(cherry picked from commit 30e90b0)
Small icons for dialog browse, refresh, and row operations.
Icons in B&W so they don't over-emphasize with respect to other
controls in the dialog.
Layout cleanup for consistency. Removal of the blank space to
left of the fields list in the Global Fields Editor, and addition
of column-sizing-to-list-width.
More even spacing for buttons in html report panel.
Honor platform conventions for action button order and layout.
Move netlist importer to update-pcb-from-schematic algorithm
(display messages and then update instead of "dry run" checkbox)
(cherry picked from commit b21e19d)
When parsing component names, we need to account for the possibility of
illegal characters (e.g. "/", ":") in the names from v4 libraries. They
are fixed internally by the cache parser but if we don't fix them
in the rescue routine, the symbol won't match it's cache name.
This standardizes all schematic illegal character routines into LIB_ID
Fixes: lp:1774774
* https://bugs.launchpad.net/kicad/+bug/1774774
When setting the maximum represented box, std::numerical_limits::min
returns the most negative number only for integers. For floating point,
it returns the smallest positive number. std::numerical_limits::lowest
is the same as min for integers but returns the most negative number for
floating point as well.
During the symbol library table implementation, the legal character
tests for the footprint library table were changed and the forward
slash '/' character became illegal. This change broke editing some
users footprint library tables that already had '/' in library table
nicknames. This change split the library nickname and library item
name illegal character tests.
When removing items, we perform a two-pass removal, checking first
for the cached rectangle collision. Then, if we do not find the item
being removed, we perform a second, more expensive pass over the full
tree. This second pass is required as we cannot be certain that an
item's bbox has not been modified between insertion and deletion. In
which case, keeping stale pointers in the tree will lead to segfaults.
Fixes: lp:1777246
* https://bugs.launchpad.net/kicad/+bug/1777246
There are a bunch of problems with event processing and closing
documents, etc., when enabled. See the bug report for more
info.
Fixes: lp:1774777
* https://bugs.launchpad.net/kicad/+bug/1774777
std::invalid_argument does not work fine with translated strings as argument for message.
(the translated message is incorrectly or not displayed if it contains non ascii8 chars, at least on Windows).
KI_PARAM_ERROR can be throw-ed with a translatable/translated string (a wxString)
This fixes some warnings on GCC 8.1:
warning: catching polymorphic type ‘class std::out_of_range’ by value [-Wcatch-value=]
catch( std::out_of_range )
^~~~~~~~~~~~
This fix is along the same lines as:
* ff1802d7a "Fix Coverity "Big parameter passed by value" warnings"
There are three related changes here to harden our handling of threads
in the footprint async loader.
1) Footprint async loader explicitly aborts any remaining loader threads
on exit.
2) We protect the thread join by a mutex
3) We do not pause during no-wait routines
When starting async processes, we need to have a way to stop the process
before releasing memory. Descoping FOOTPRINT_ASYNC_LOADER while the
threads were still running could cause crashes depending on the memory
structure. To avoid this we define clear procedures for exiting a
running async processes and call these when exiting.
Fixes: lp:1772909
* https://bugs.launchpad.net/kicad/+bug/1772909
It can be useful to have similar class messages grouped together so that
error messages in a larger report don't get lost among the
warning/info/action messages.
This patch allows sorting of messages for dialogs that benefit from
organization. Default behavior of reporter messages remains
unchanged by this patch.
Fixes: lp:1772090
* https://bugs.launchpad.net/kicad/+bug/1772090
1) hide the status popup when the dialog is brought up
2) forward events from the popup to the canvas so hotkeys work
3) make sure diff pair radius is always 100%
4) fix greyed-out Miter style label
5) make L a hotkey so it works before you start dragging
Fixes: lp:1545856
* https://bugs.launchpad.net/kicad/+bug/1545856
Unifies the different sections of hotkeys so that we are not storing two
[eeschema] or [pcbnew] sections in two different files.
Previous hotkey definitions are loaded at start if they exist but are
overwritten by the new format, if it exists. Changes to hotkeys save
only in the combined format.
Hotkey editor for each application only shows the hotkeys relevant to
that application.
Fixes: lp:1741757
* https://bugs.launchpad.net/kicad/+bug/1741757
Fixes: lp:1668799
* https://bugs.launchpad.net/kicad/+bug/1668799
This reverts the hotkeys file format to a human readable and VCS
compatible listing by splitting individual hotkey assignments onto
separate lines instead of the single key. This unifies the hotkey format
between the application configuration and export Hotkey routines.
Both hotkey formats remain readable by the same routines.
* Refresh the view only when changes are made in the caller frame.
* Allows recreate a new instances when try to open the 3D view from a frame taht is not the initial caller
* Remove duplicate code in kicad frames.
Footprint filter provides two Regex filtering options. One for keywords
and one for footprint keywords. The footprint keywords (contained in
the symbol files) need explicit '*' at the beginning and end of the
filters to allow matching start/end. Type-in filters should search
implicitly matching any wildcard substring.
Fixes: lp:1769931
* https://bugs.launchpad.net/kicad/+bug/1769931
Recent versions of wxWidgets wxStandardPaths::GetUserConfigDir() correctly
append ".config" on Linux build which was incorrect as the current code
already appended it to the path. Add a check to see if ".config" is the
last path and append as required.
Check for XDG_CONFIG_HOME environment variable on all platforms not just
Linux.
Fixes lp:1769145
https://bugs.launchpad.net/kicad/+bug/1769145
Changes SHAPE_CONVEX to SHAPE_SIMPLE to better reflect the limitations.
Changes SHAPE_LINE_CHAIN::PointInside calculation to allow points
strictly inside a line chain
Fixes: lp:1768862
* https://bugs.launchpad.net/kicad/+bug/1768862
This is particularly important when bulk adding (by director, etc.)
as otherwise the user might end up having to click OK to many
many error dialogs.
Fixes: lp:1764057
* https://bugs.launchpad.net/kicad/+bug/1764057
Footprint filters need to be able to match the start and end of strings.
The standard wildcard filter implictly adds "*" to the start and end of
match strings, so we create a derived class that requires an explicit
"*" or "?" to match wildcards.
Fixes: lp:1751565
* https://bugs.launchpad.net/kicad/+bug/1751565
Also removes parallel implementation in favour of using the
normal one (with a new wxGauge-backed PROGRESS_REPORTER).
Fixes: lp:1764196
* https://bugs.launchpad.net/kicad/+bug/1764196
Symbol/footprint library and entry have the same set of forbidden
characters with a single exception, space character. To accommodate for
this difference, LIB_ID validation and fix methods have been extended to
specify the LIB_ID type that is checked (schematic/board).
LIB_ID::HasIllegalChars() and LIB_ID::FixIllegalChars() had two different
sets of characters treated as invalid in LIB_IDs. The set has been
factored out to another function to avoid duplication.
Also update the rest of the symbol-chooser usage to current
specs, including examining the timestamp to see if the list
needs loading at all.
Partial fix to: lp:1760936
* https://bugs.launchpad.net/kicad/+bug/1760936
The change track posture hotkey '/' was getting interpreted as the show
hotkey list shortcut '?' on windows. This fix is temporary hack to fix
the problem which much more involved than the simple #ifdef/#endif used
to fix this issue.
Add key code tracing to help analyze key codes for future development.
This is due to the fact the same ID was used for menuitems in menubar,
and tools in toobars.
Especially, some items were not compatible due to different attributes.
Windows does not accept the same ID for 2 items inside the same frame.
It creates issues (items not shown, Asserts, ...)
While we already cache the loaded footprint files, parsing said files
into the list is also time-intensive. Since the FOOTPRINT_LIST is
already hash-stamped against the current timestamps of the files that
make up the list, sharing a single copy of the list is quite
straight-forward.
For some DRC checks, the location of the marker is not the location
of the first item in the resulting DRC_ITEM, so centering the screen
on PointA of the DRC_ITEM can be confusing.
- changed EAGLE_UNIT enum names from EAGLE_* to EU_*
- renamed ToNanoMeters() to ConvertToNm() and added a comment
- added ToMils() and ToNanoMeters() method
This primarily keeps us from overriding "truth" with data that
might not have even been saved when closing ModEdit.
Fixes: lp:1752543
* https://bugs.launchpad.net/kicad/+bug/1752543
Normal SetValue() call would temporarily change the displayed
value, but as soon as the text widget receives focus again, the original
expression (not evaluated) is restored.
To avoid this, the original expression is cleared in the associated
NumericEvaluator object.
If ',' is used as decimal separator by the current locale a '.' is also accepted.
Also add support for units "mi", "th" and "in" as described in the documentation of pcbnew.
Fixes: lp:1751315
* https://bugs.launchpad.net/kicad/+bug/1751315
Frame, dialog and config file couldn't agree on whether to use
internal units or not.
Frame now stores internal units, and they're now mapped on the
way in/out of the config file. Dialog was already assuming they
were stored in internal units (though they were previuosly not).
Fixes: lp:1751435
* https://bugs.launchpad.net/kicad/+bug/1751435
Too many external applications fail to touch the parent directory.
Also removes FP_CACHE_ITEM lastMod times and dirty flags as we've
always loaded libraries atomically anyway.
Claws back some of the performance lost by being more efficient
with cache management for sequential calls to Enumerate and then
Load.
Fixes: lp:1750936
* https://bugs.launchpad.net/kicad/+bug/1750936
Add a library selector to the save dialog. Initialize it to the
footprint's library. This way a straigh-up save will do what's
expected.
However, the user can still select the active library (or any
other library) if they really did want to move the footprint.
Fixes: lp:1750918
* https://bugs.launchpad.net/kicad/+bug/1750918
Also adds indicators in layers palette for feedback.
Also generates sized images for all indicators instead of using
scaled bitmaps (which didn't look great).
Also fixes a completely unrelated typo in a UI string.
Also fixes:
- forcing the annotation scope to "full schematic" when run
as a prerequisite to Generate Netlist.
- a long-standing bug where displaying extra items in a dialog
would mess up the height of the HTML_REPORT_PANEL (becasue
we were setting the html window's height rather than its
parent flexgrid.
- initializing the annotation radio buttons to safe values
(full schematic and keep existing)
Fixes: lp:1750062
* https://bugs.launchpad.net/kicad/+bug/1750062
NEW: add new align icons based on the existing align_items.svg icon, just flipped and rotated
CHANGED: change the context menu to use the new align icons
After Eagle project import, schematic and board netlists are inconsistent:
footprints do not have sheetpaths assigned, schematics are unannotated.
One can update netlist either by references or timestamps, but timestamps
are empty in pcbnew, and updating by reference must by preceded by
annotation which may lead to broken links between board and schematics
(Eagle does not require references to end with a number, so KiCad annotater
will add numbers in such cases).
To fix the problem, there is a two step netlist update:
- update by reference without the annotation step, to assign
correct sheetpaths to footprints
- update by timestamp, after symbols are annotated, in order to
update references in the board
Fixes: lp:1748502
* https://bugs.launchpad.net/kicad/+bug/1748502
All calls to {save,apply}ViewControls() have been replaced with a new
method: setActiveState(). The advantage is that setActiveState() always
saves view controls settings to the tool that set them. As long
as setActiveState() is called every time there is a tool context
switch, the changes are kept up-to-date.
Fixes: lp:1748613
* https://bugs.launchpad.net/kicad/+bug/1748613
Fixes a bunch of errors:
- libedit and libbrowser would zoom to bounding box but centre on canvas
- libedit, libbrowser and gerbview didn’t take the scroll bars into account
- pcbnew didn’t take scroll bars into account or apply the 10% margin
- appending a board file would re-centre, but not re-zoom
Fixes: lp:1504302
* https://bugs.launchpad.net/kicad/+bug/1504302
Second disambiguation menu was caused by another call to
SELECTION_TOOL::RequestSelection() meant to get the list of
connected tracks. When there were only footprints under the cursor,
it asked the user again to pick an item to remove.
Fixes: lp:1748521
* https://bugs.launchpad.net/kicad/+bug/1748521
Smartens the cache freshness checking, and adds checksums of
constituent-directory last-mod-dates to the footprint info
list.
Also inserts the dataPtrs into the list at the same time as
the text to keep wxWidgets from measuring the width of the
text twice (yes, really). And converts the list to default-
column widths in case the wxWidgets patch is present to
greatly speed list creation (by not measuring all that text).
On my machine drops the first-load time from 4s to 2.5s and
the subsequent-load times from 2.5s to < 1s. With the
wxWidgets patch subsequent-loads become near-instantaneous.
Launching right click context menu overrides the cursor position, so all
actions executed by the tools will be performed in the right click
position. It created an issue, as the overridden cursor settings were
saved into wrong context if there was another tool activated in the
meantime.
Current implementation saves cursor settings for all tools and restores
them once the right click context menu disappears.
Fixes: lp:1745981
* https://bugs.launchpad.net/kicad/+bug/1745981
Fixes: lp:1746507
* https://bugs.launchpad.net/kicad/+bug/1746507
Keystroke zoom (F1/F2) always centered the screen, because it
was handled as ID_POPUP_ZOOM_IN event. Mousewheel scrolling
was ok, because it is handled using different event based
on the configuration.
This patch introduces special event ids for keystroke
zooming that are then properly translated to either
ID_POPUP_ZOOM_IN or ID_OFFCENTER_ZOOM_IN depending
on the configuration.
The same issue is fixed for legacy canvas pcbnew.
Fixes: lp:1742567
* https://bugs.launchpad.net/kicad/+bug/1742567
Signed-off-by: Martin Sivak <mars@montik.net>
PICKED_ITEMS_LIST knows the architecture of the undo commands so
that it can delete those ITEMs which it owns. This represents poor
encapsulation so instead of adding yet another case, I added a
UR_TRANSIENT item flag which is set by callers whenever they create
new objects to “give to” the undo/redo stack. This allowed some
cleanup of other code, but cleaning up UR_DELETE and UR_WIRE_IMAGE
will be a bigger task and have to wait for another day.
Fixes: lp:1542018
* https://bugs.launchpad.net/kicad/+bug/1542018
The undo/redo operations are essentially the same as for
UR_CHANGED: we store both the origin marker item and a copy
of it and flip back and forth between the two. This also
required the implementation of clone() for the markers.
The ORIGIN_VIEWMARKER is moved from being a subclass of
EDA_ITEM to BOARD_ITEM to facilitate the use of a UR_CHANGE-
like implementation without having to know the internals
of the ORIGIN_VIEWMARKER.
In the command processors, the setting of the origins is
broken into two parts: one for UI-level access which includes
setting up undo, and one for low-level access which does not.
The undo/redo code itself of course uses the lower level.
Fixes: lp:1542018
* https://bugs.launchpad.net/kicad/+bug/1542018
It fixes the case when a tool sets up a menu and starts its event loop
waiting exclusively for menu events. If none arrived, the tool was stuck
in the loop forever.
Fixes: lp:1744915
* https://bugs.launchpad.net/kicad/+bug/1744915
This adds a set of conditions that will prevent a wire from being
automatically trimmed. Wires that are currently being moved or are
newly created or are explicitly avoided will not be removed. This also
adds a function to set a flag on items in a block.
Fixes: lp:1744632
* https://bugs.launchpad.net/kicad/+bug/1744632
Rename GetPolyPoint() to BuildPolyPointsList(), because GetPolyPoint() looks like an accessor, but it is not an accessor.
(Using it as accessor can creates a *very long calculation time* for very basic access to polygon vertices)
Fixes: lp:1745050
https://bugs.launchpad.net/kicad/+bug/1745050
Three interrelated issues:
1) Implement an undo/redo type for renames so that we know to delete
the old lib entry and add a new lib entry
2) When doing so (for the undo/redo OR the original edit), we must
make a copy of the 'original' LIB_PART which is used for revert, and
hand it to the new lib entry
3) When comparing a modified component tree item with the current item
we must also check for aliases.
Fixes: lp:1743857
* https://bugs.launchpad.net/kicad/+bug/1743857
Fixes: lp:1744371
* https://bugs.launchpad.net/kicad/+bug/1744371
Fixes: lp:1744373
* https://bugs.launchpad.net/kicad/+bug/1744373
Gal mode: graphic cross-air cursor moved on items when clicking on & DRC error, like in legacy mode.
Make popup menu shown when right clicking on a DRC error item working.
Major cleanup of many icons (started as a simple effort to tweak libedit and modedit icons)
Ref: https://lists.launchpad.net/kicad-developers/msg32860.html
* Each application icon has been updated
* Consolidated icon "modifiers" across many icons
* Replaced confusing arrows with "load" and "save" icons
* Slight code updates to reference correct icons
* Consolidate multiple representations of single icon type(s)
This is meant as a stopgap for 5.0, with plans to add proper scaled
icons in the 6.0 cycle. A function KiScaledBitmap() is added, which
works like KiBitmap() except it scales the bitmap according to the
calling window's font size. Controls have been added to all the main
applications to let the user select scaling manually (these were omitted
from smaller apps that didn't already have a place to put them).
In addition, in eeschema only, the pixel height of the system font is
shown in the options dialog for diagnostics. This is only for collecting
feedback before 5.0 release from users with different displays and will
be removed.
- Add helper methods for DPI-independent sizes
- Make splitter sashes visible on macOS
- Remove SetSizeInChars() - wx has a built-in way that I missed
- DIALOG_CHOOSE_COMPONENT: DPI-indep splitter sizes
- DIALOG_RESCUE_EACH: DPI-indep default size and sensible HTML window
size
- COMPONENT_TREE: DPI-indep sizing
- DIALOG_FP_LIB_TABLE, DIALOG_SYMBOL_LIB_TABLE
If the client tool indicates it isn't happy for us to continue
(because, for instance, the user has cancelled the Zone Properties
dialog), then make sure we don't capture the mouse.
Fixes: lp: 1740780
* https://bugs.launchpad.net/kicad/+bug/1740780
Move the OSX dialog fix ups later so they come after some wxWindow
deferred processing.
Also provides a facility for doing a selectAll in each text field
so that tabbing between text fields behaves correctly.
Fixes: lp:1599157
* https://bugs.launchpad.net/kicad/+bug/1599157
The "operator BOX2I() const" of EDA_RECT produced
wrong boxes, usually much to big. It passed its
end-position as second argument to the constructor
of BOX2I. However, BOX2I expects its size as second
argument.
This caused a dramatic performance penalty in some
cases.
There were two problems in the triangulation caching
of SHAPE_POLY_SET:
First there was a double free:
While SHAPE_POLY_SET implements the copy constructor,
it did not implement the operator=, which resulted
in the default operator= being generated by the
compiler. The default operator= copied the member
m_triangulatedPolys, which is a std::vector of pointers.
So after operator= execution, there are two SHAPE_POLY_SET
having pointers to the same TRIANGULATED_POLYGONs, each
of them deleting them in their destructors. This led
to segfaults, because calling
TransformShapeWithClearanceToPolygon on a Zone
uses operator= to copy the contained SHAPE_POLY_SET.
The new SHAPE_POLY_SET then went out of scope and
deleted the cached triangulation within the Zone.
This first problem is fixed by implementing operator=
for SHAPE_POLY_SET.
Second, there was a memory leak: Calling
"CacheTriangulation" on a SHAPE_POLY_SET,
then changing the polygon and then calling
"CacheTriangulation" again led to
leaking the
triangulations generated in the first call.
This second problem is fixed by holding
the cached triangulations in a unique_ptr.
Moved the code handling text overbars to a single function
(ProcessOverbars()) to replace similar pieces of code trying to do the
same thing.
Fixes: lp:1735906
* https://bugs.launchpad.net/kicad/+bug/1735906
In-class initializers for "static const" class members must be constexpr,
however std::string is only "static const" itself and cannot be used
without compiler extensions.
Remove developer email addresses as requested on the developers mailing
list.
Update source contributor list.
Add place holders for symbol and footprint library contributors.
Remove unnecessary wxT() macros.
LAYER_NON_PLATED to LAYER_NON_PLATEDHOLES
LAYER_PADS_HOLES to LAYER_PADS_PLATEDHOLES
LAYER_PADS to LAYER_PADS_TH
and add comments and fix a render issue in gal mode for non plated holes.
Opening Properties dialog normally does not ask the user to confirm the
action, even for locked items. The exception was a case when there was
nothing selected and Properties dialog was invoked via its hot key -
then SELECTION_TOOL::RequestSelection() tried to get the item under the
cursor, verifying the lock flag.
Fixes: lp:1734537
* https://bugs.launchpad.net/kicad/+bug/1734537
3 EDA_RECT members were returned by reference by their accessors, now they are returned by value.
It avoid constraints when using them, especially when mixing Python and C++ in scripts.
Change the legacy schematic plugin to preserve illegal LIB_ID characters
when load schematics prior to version 4.
Check for illegal LIB_ID symbol names during project rescue. Rename and
rescue any symbols with illegal LIB_ID names.
Add static methods to LIB_ID object for testing for and fixing names
with illegal characters so there is uniform code for doing so.
Update the Eagle plugin symbol loader to fix symbol names using the new
LIB_ID fix illegal names method.
Fixes lp:1732236
https://bugs.launchpad.net/kicad/+bug/1732236
The NormalizePath() function always added a trailing separator when
normalizing environment variables. Now it checks an environment
variable for a trailing separator and only adds one if it doesn't
already exist.
May be a partial fix for:
Fixes lp:1733217
https://bugs.launchpad.net/kicad/+bug/1733217
SEARCH_STACK is a deprecated method for getting the list of paths where
one could look for a file. Instead it tries the project path and
environmental variables.
Dotted, dashed and dash-dot lines are provided in
HPGL, PDF, PS and SVG plot outputs along with line
width and color formatting.
DXF format does not currently provide any dashed
line functionality
A bug in HPGL plotted is corrected. Previous HPGL
dashed line commands were incorrect, plotting all
lines as solid.
The GTK+ file dialog is case sensitive however it does support regular
expressions. Most of the file dialog wildcards are lower case so only
files with the lower case extensions will show up in the file dialog.
This code adds a method to convert file extensions of any case to the
appropriate (sch -> [sS][cC][hH]) regular expression on GTK+ builds so
all file extension case combinations will show up in the file dialog.
A note to developers: make sure to add a file extension when setting
when setting the default file argument. If you do don't set an
extension, the GTK+ file dialog will happily append the regular
expression as the file extension which is surely not what you want.
There are still a few known places (mostly gerbview) where there are
some complex wildcard code that has not been converted.
Fixes lp:1720542
https://bugs.launchpad.net/kicad/+bug/1720542
A copy and paste error was causing to footprint library table file name
and path to be shown in the symbol library table edit dialog. Factor
out code in PROJECT::FootprintLibTblName() to PROJECT::libTableName()
to handle both symbol and footprint library table names and create a
new PROJECT::SymbolLibTableName() method to fix the path and file name
in the symbol library table edit dialog.
Simplify some of the library editing code. There have been a few minor
changes in the behavior of the editor. If the current symbol is deleted
from the library, the next symbol in the library is not loaded. The
deleted symbol is cleared and the current symbol is empty.
Change component to symbol to align with the preferred terminology
discussed on the developer's mailing list.
Add separate update UI event for save library as to enable the menu entry
whenever a library is selected.
Change the select symbol list dialog to a single column using the LIB_ID
format LIB_NICKNAME:LIB_ITEM_NAME so that the selection can be parsed by
LIB_ID.
Add method to expand URI to LIB_TABLE_BASE.
Override wxApp::OnExceptionInMainLoop() in debug builds to make debugging
easier when an unhandled exception occurs in a wxUpdateUIEvent handler.
Change SCH_SCREENS::HasNoFullyDefinedLibIds() to return false when the
schematic has no symbols to prevent the remapping dialog from being run.
Use SCH_COMPONENT part reference when creating netlist rather than looking
up the library symbol.
Remove all instances of PART_LIBS and replace them with SYMBOL_LIB_TABLE
except for the CMP_TREE_MODEL_ADAPTER which requires updating as well.
Return the selected symbol using the LIB_NICKNAME:SYMBOL_NAME format when
viewer is launched as modal.
Add code to SYMBOL_LIB_TABLE object to allow enumerating symbol library
power symbols only.
Add a non-const version of LIB_TABLE::findRow().
Remove redundant information from Doxygen comments.
Check the if the schematic being loaded has been remapped (no symbol
library table nicknames defined) and remap accordingly.
Fix issues when resolving the library symbol links in the schematic
symbols.
Add cache library fallback when resolving symbols that cannot be
remapped.
Add remap complete message to remap dialog.
Add HasLibrary() helper to LIB_TABLE_BASE.
Fix issues when loading library symbols using symbol library table.
Add hashing function to symbol library table.
Improve the symbol panel message to warn user when cache library is
used to resolve symbol.
SHAPE_POLY_SET: fix crash in VertexCount when it is a empty poly set, or when params are incorrect.
minor other fixes:
warning in degug mode in dialog_dxf_import_base.cpp
pcb_painter.cpp: remove a useless debug line.
- Also makes the project and file import functions filetype dependent.
- The change from IO_MGR::KICAD to IO_MGR::KICAD_SEXP removes a conflict from a compile definition for KICAD when compiling kicad/import_project.cpp
- !! Eeschema uses Eagle plugin for loading schematics (i.e. it does not
use KiCad format anymore)
- Fixed build errors
- Fixed a few crashes
- Code formatting
- fixed netcode propagation bug
- factored out EDIT_TOOL::m_offset, now selection offset is stored in SELECTION class
- added VECTOR2I-based Move/Flip/Rotate methods in BOARD_ITEM
- added selection of reference point
- added snapping when pasting
- some minor code refactoring
- disabled pasting between footprint and pcb editors due to model incompatibility
This fixes potential DRC false positive bugs that occur when inner layers
are removed from the board but the actual objects on contained on those
layers remain in the board.
Since Pcbnew does not handle odd number layers, this is not a perfect fix.
When the user chooses the front or back layer only options from the layer
setup dialog, objects on the copper layers will not be removed. This will
not cause the false positive issue described above.
Get rid of dialog OK and cancel button event handlers and use the proper
TranferData(To/From)Window for handling control data.
Add PCB_LAYER_COLLECTOR for collecting board objects by layer. Factor out
redundant [] operators into base PCB_COLLECTOR object.
Fixes lp:893950
https://bugs.launchpad.net/kicad/+bug/893950
- New GAL draw layers for GerbView
- Improved bounding boxes for Gerber shapes
- Switched to use of SHAPE_POLY_SET for polygons
- Add GAL methods to support selection and rendering
- Add GUI support of editing GAL options
- Rename get/setActiveLayer to Get/SetActiveLayer to match convention
Add EDA_DRAW_FRAME::isBusy() method to test if the current item is being
edited or a block operation is in progress.
Ignore undo and redo commands when editor is busy.
Fixes lp:1718656
https://bugs.launchpad.net/kicad/+bug/1718656
Make all trace environment variable strings upper case and prefix with
KICAD_TRACE_ for consistency.
Add Doxygen group for the trace environment variable strings.
fp viewer uses the default colors, because it has no color setup dialog.
class_colors_design_settings: remove not used members.
Fix issue in modedit: the color config was never read.
Previous implementation uploaded only vertices with indices less
or equal to the number of stored vertices, which is invalid when
the container become fragmented.
Fixes: lp:1712887
* https://bugs.launchpad.net/kicad/+bug/1712887
- support for background color setting
- removed several global config settings (such as g_Drc_On)
- wrapped most of global config settings in PCB_GENERAL_SETTINGS class
- reorganized PCB general options dialog to clearly mark which options concern only the legacy canvas
- new GAL feature for legacy users: double-click (or E) to change track width available as an option.
Fixes: lp:1530543
* https://bugs.launchpad.net/kicad/+bug/1530543
Fixes: lp:1707145
* https://bugs.launchpad.net/kicad/+bug/1707145
- added TOOL_INTERACTIVE::resetTransitions()
- made protected and moved TOOL_BASE::setTransitions() to TOOL_INTERACTIVE
- TOOL_MANAGER calls TOOL_INTERACTIVE::resetTransitions() instead of
setTransitions()
This forces the compiler class specific features rather than borrowing
from the base class's std::string. In some cases prior to this,
wxString( std::string ) was being called rather than UTF8::operator
wxString() leading to garbled wxStrings.
Added function UTF8::wx_str() which is of great convenience also.
Implicit conversions still work as before, and hopefully more reliably.
This commit was too broad and not cognizant of the purpose of the class
UTF8.
Add MAYBE_VERIFY_UTF8() macro, which can trap non-UTF8 encoded strings in
debug builds.
Use that macro conditionally in class UTF8 to trap non-UTF8 encoded strings
being put into UTF8 instances.
In the previous version the method did not work correctly
when an action was invoked from context menu. In such case,
the cursor position was obtained in the moment of selecting
the action, instead of using the right click location.
Jeff Young
Carsten Schoenert
Seth Hillbrand
Maciej Suminski
Wayne Stambaugh
jean-pierre charras
John Beard
Kristoffer Ödmark
Jon Evans
Tomasz Wlostowski
Russell Oliver
Andrzej Wolski
Michael Geselbracht
Michael
Robbert Lagerweij
Martin Sivak
Oliver
Chris Pavlina
Camille
Mark Roszko
Bernhard Stegmaier
Andreas Buhr
Henner Zeller
Simon Richter
Julius Schmidt
Marvin Schmidt
Oliver Walters
Fabrizio Tappero
Mathias Grimmberger
Michael
Dick Hollenbeck