Keystroke zoom (F1/F2) always centered the screen, because it
was handled as ID_POPUP_ZOOM_IN event. Mousewheel scrolling
was ok, because it is handled using different event based
on the configuration.
This patch introduces special event ids for keystroke
zooming that are then properly translated to either
ID_POPUP_ZOOM_IN or ID_OFFCENTER_ZOOM_IN depending
on the configuration.
The same issue is fixed for legacy canvas pcbnew.
Fixes: lp:1742567
* https://bugs.launchpad.net/kicad/+bug/1742567
Signed-off-by: Martin Sivak <mars@montik.net>
Major cleanup of many icons (started as a simple effort to tweak libedit and modedit icons)
Ref: https://lists.launchpad.net/kicad-developers/msg32860.html
* Each application icon has been updated
* Consolidated icon "modifiers" across many icons
* Replaced confusing arrows with "load" and "save" icons
* Slight code updates to reference correct icons
* Consolidate multiple representations of single icon type(s)
This is meant as a stopgap for 5.0, with plans to add proper scaled
icons in the 6.0 cycle. A function KiScaledBitmap() is added, which
works like KiBitmap() except it scales the bitmap according to the
calling window's font size. Controls have been added to all the main
applications to let the user select scaling manually (these were omitted
from smaller apps that didn't already have a place to put them).
In addition, in eeschema only, the pixel height of the system font is
shown in the options dialog for diagnostics. This is only for collecting
feedback before 5.0 release from users with different displays and will
be removed.
Improve dialog layout and fix UI policy issues with all of the dialog
boxes in the Gerbview and Pcbnew code paths.
Updated the use of component to footprint where appropriate.
The GTK+ file dialog is case sensitive however it does support regular
expressions. Most of the file dialog wildcards are lower case so only
files with the lower case extensions will show up in the file dialog.
This code adds a method to convert file extensions of any case to the
appropriate (sch -> [sS][cC][hH]) regular expression on GTK+ builds so
all file extension case combinations will show up in the file dialog.
A note to developers: make sure to add a file extension when setting
when setting the default file argument. If you do don't set an
extension, the GTK+ file dialog will happily append the regular
expression as the file extension which is surely not what you want.
There are still a few known places (mostly gerbview) where there are
some complex wildcard code that has not been converted.
Fixes lp:1720542
https://bugs.launchpad.net/kicad/+bug/1720542
- New GAL draw layers for GerbView
- Improved bounding boxes for Gerber shapes
- Switched to use of SHAPE_POLY_SET for polygons
- Add GAL methods to support selection and rendering
- Add GUI support of editing GAL options
- Rename get/setActiveLayer to Get/SetActiveLayer to match convention
fp viewer uses the default colors, because it has no color setup dialog.
class_colors_design_settings: remove not used members.
Fix issue in modedit: the color config was never read.
- support for background color setting
- removed several global config settings (such as g_Drc_On)
- wrapped most of global config settings in PCB_GENERAL_SETTINGS class
- reorganized PCB general options dialog to clearly mark which options concern only the legacy canvas
- new GAL feature for legacy users: double-click (or E) to change track width available as an option.
Fixes: lp:1530543
* https://bugs.launchpad.net/kicad/+bug/1530543
Fixes: lp:1707145
* https://bugs.launchpad.net/kicad/+bug/1707145
The zoom window toolbar button is on the right toolbar separated from the
other zoom buttons on the top toolbar. Move the zoom window button to the
top toolbar beside the other zoom buttons.
In Gerber files the char 'X' is used as separator.
But when reading parameter values, the sequence "0xnnn" is a number in hexadecimal format, and the 'X' char is not seen as separator by usual strtod or strtol C functions.
This is now fixed.
non ascii7 filenames of zip files issues are fixed.
There are still issues with non ascii7 filenames inside the zip archives (especially when a zip archive was created on Windows)
The motivation here is to concentrate display options in the GAL display
settings, ready for removal of legacy canvases. Instead of having the
property as a member of the DRAW_FRAME, with the GAL canvas retreiving
it from there, it is now in the GAL_DISPLAY_OPTIONS struct, and both GAL
and legacy get it from there.
The options for setting cursor shape are then moved out of the general
options dialog, and into the GAL display options widget, where they can
be used in all GAL-aware programs.
GAL cursor shape works on GAL, but not legacy, so the option is now
available on OSX (but only affects GAL, and is labelled as such).
The introduces INDICATOR_ICON, which is a very simple class holding a
bitmap that can toggle on or off.
The ICON_PROVIDER class then provides icons to INDICATOR_ICONS, which
means the class can be used for more than just row indicators.
A default row icon provider is also provided for use in the standard row
selector.
eeschema now supports arbitrary colors for all object types, and
pcbnew does in GAL canvas. When switching from GAL to legacy canvas,
pcbnew will convert colors to the nearest legacy color.
bitmaps.h was included in nearly every file in the project due to it
being included by base_struct.h
Only about 130 files actually use the XPM definitions defined there, and
many of those already included bitmaps.h themselves, or via
menu_helpers.h. However, touching bitmaps.h would result in over 400
rebuilt files for pcbnew alone.
This commit moves the bitmap-related types like BITMAT_DEF out to a new
header, which is still included by base_struct.h, which is less
avoidable for now, it's it's used in the interface.
The icon list is still in bitmaps.h. This has the side effect that's
it's now easier to automatically generate this file.
Many classes in pcbnew and eeschema needed some functions moved
to the implementaitons from the headers too.
Make all EDA_TEXT data private and rename accessors to avoid function
name collisions in derived classes.
Overload EDA_TEXT's SetTextAngle() and SetEffects() in TEXTE_PCB.
Add support for preserving Reference text position, size, orientation
during a netlist import into a BOARD, as well as the one off footprint
update dialog.
Fix a very minor other issue (due to a minor bug in wx 3.1)
Displays the full graphic layer name of the selected item in message panel (instead of just the graphic layer number)
This feature was not reliably available: neither pl_editor nor GAL supported
it. It has been replaced over the past few commits with a new zoom-to-selection
tool available in all applications and modes.
This feature cannot work reliably for reasons explained in lp:1463505. Remove
the option on OS X builds and force cursor to the small one.
https://bugs.launchpad.net/kicad/+bug/1463505
> Bernhard Stegmaier (stegmaier) wrote on 2016-01-14:
>
> As far as I see from the code this is no bug but done on intention.
>
> The reason probably is that on OSX in the legacy canvas you don't have the
> XOR-drawing as on other platforms. To the best of my knowledge, this would
> mean that on every mouse move you would have to repaint the whole window just
> to get rid of the "old" cross.
>
> So, I would say this is a clear "won't fix".
> We could think of just removing/disabling the button in the legacy canvas.
I tried to merge some constants used both in legacy mode and gal mode (which were, before this patch, separate constants).
There is still a serious work to avoid different calculation code for the same text in draw and plot functions.
Work in progress to merge these calculation functions.
* Move add_directory()s in main CMakeList.txt after all find_package()
macros are run so all flags in the main CMakeList.txt are propagated
to the sub-folder CMakeList.txt files.
* Remove commented out include of config.h
* Make the link maps only build on linux as -${TO_LINKER},-cref
-${TO_LINKER},-Map=blah just gives warnings on osx w/ clang
* Make the link maps only build with flag -DKICAD_MAKE_LINK_MAPS is
defined during CMake configuration as they are highly specific.
* Moved the code for setting link maps into the main CMakeList.txt
file to avoid duplication.
* Removed -D__ASSERTMACRO__ from osx as its no longer needed
* Removed a couple of other OSX only things that wouldn't work anyway
* Moved set (BU_CHMOD_BUNDLE_ITEMS) to the main CMakeList.txt as
otherwise it would only work for the KiCad build not the other
applications
* Made KICAD_SCRIPTING_MODULES enable KICAD_SCRIPTING as currently if
you have modules enabled without the scripting base it will on build.
This could be changed to a fatal error saying you need to also enable
scripting but it seems unnecessary.
* Removed duplication of pcbnew.py install code under modules and
scripting since you can't have modules without scripting now
* The resource setting for bitmap2component is too late in the CMakeLists.txt,
and is being ignored. Bitmap2component does not have an icon resource on
Windows. Moving the entire section resolves the issue.
* The other programs only have the mingw special case listed, not the generic
declaration for the resource file so added them.
In the C++ standard, this function is only defined for floating point
types, and integers cannot be implicitly converted. Using explicit
conversions avoids a GCC specific extension to the standard library.
* Make the about dialog help string consistent across all menus.
* Improve print preview window and print initialization error messages.
* The usual smattering of coding policy fixes.
* It appears the wxApp leaves the trailing double quote when handling a quoted parameter list
that was causing the project path passed from KiCad to have a trailing double quote which caused
a file read error.
* Remvoe all comments from source file gerbview/gerbview_frame.cpp.
* Remove unused and empty function GERBVIEW_FRAME::SetAllVisibles().
* Add path paramters to KiCad executable launcher so we can see the full command string.
* Rename Eda_FileSelector to EDA_FILE_SELECTOR.
* Add optional pointer to wxString to save the most recently used path to EDA_FILE_SELECTOR.
* Rename Eda_DirectorySelector to EDA_PATH_SELECTOR.
* Replace wxGetCwd() with wxStandardPaths::GetDocumentsDir(). This fixes the windows issue
where wxGetCwd() returns the path where the executable files are located.
* Add code to handle most recently used path to EDA_BASE_FRAME.
* Fix string formatting error in kicad/files-io.cpp.
* Remove setting and restoring current working directory when launching GerbView. Setting the CWD
has no effect on the launched executable which starts with it's own CWD.
* Allow project path to be passed to GerbView when launched from KiCad.
* Note: this is a work in progress. Do not expect every path and/or file selection dialog to properly
update the most recently used path. The correct solution to this problem requires a much more
well though out solution which will not happen until after the next stable release.
If the image was being rotated by a valid amount but not 270 degrees due to the if statements it would already report that there was an invalid value.
Also due to the strnicmp only checking the first 2 characters which was valid for 0* but not the rest of the numbers, some values would be able to work that shouldn't
Fix an issue when a .kicad_pcb file contains an incorrect fpid ( containing a '/ ' in footprint section ) . After saving the board the file was no more readable, due to a broken fpid saved in file
(can happens in old .kicad_pcb files, coming from the bzr 4022 stable version, and/or in files converted from an other EDA tool like altium)
Fix 2 very minor coverity warnings.
* Use "Close" in the file menu of every main frame window instead of the
mismatch of the terms "Close", "Exit", and "Quit".
* Change the terminology in the Pcbnew graphic text edit dialog to match the
module text edit dialog.
* Improve the layout of the Pcbnew graphic text dialog.
* Fix some wxPrintf parameter type assertions for 64 bit time_t.
* Fix all (at least I think I got all of them) duplicate menu accelerator
characters.
Eeschema now uses dashed lines for graphic lines (to be consistent with plot functions and toolbal icon).
Fix an old bug in some envionments which warp the mouse on a bad monitor when opening eeschema, pcbnew and some other windows, only noticeable guys who are lucky enough to have more than one monitor.
Fix issue when using a page layout file in project folder: eeschema and Pcbnew did not use it, unless using an absolute path.
Now, if the file path is nor absolute, it is seen as relative to the project (which is the expected behavior)
fp lib wizard: when pcbnew id compiled with USE_GITHUB_PLUGIN=OFF, the github plugin option is no more accessible (and the web viewer no more used).
BOM dialog: remove a not very useful button, and merge its function with an other (not perfect, need more work)
Add message box to show info added in BOM python scripts (See scripts/bom-in-python/README-bom.txt about this info)
Pcbnew already uses this attribute when creating Gerber files.
Because Gerber files using this attribute identify the board layers stackup, Gerbview (if this attribute is defined) can sort gerber images stach up like the board.
(in layer manager, just right click to access to the sort menu)
* Make title capitalization consistant.
* Replace some instances of module with footprint.
* Use angle instead of orientation where appropriate.
* Remove abbreviations where it made sense.
* Coding policy fixes.
* Fix creation of single app bundle with respect to scripting support.
* Cleanup scripting search paths for OSX.
* Fix some small CMake bugs from previous OSX build change.
* Optimize bundle file structure to be consistent with Apple specs.
* Add helper script for compiling wxWidgets and wxPython
* Update OSX build instructions.
* Compile all binaries into a single application bundle.
* Use CMake BundleUtilities to make application bundle relocatable.
* Restructure build output to directly create an image file.
* Fix default search paths.
* Set KIGITHUB environment variable.
* Added patch to fix wxWidgets so names for OSX.
* Add hot key handled return indicator to DRAW_FRAME::GeneralControl() and
DRAW_FRAME::OnHotKey() and all classed derived from DRAW_FRAME.
* Add code to all GeneralControl() and OnHotKey() functions to return true if
hot key was handled.
* Call event skip in DRAW_PANEL::OnKeyEvent() when key event is not handled to
allow default menu event handler to function properly.
*) When kicad.exe closes a project, close any open KIFACEs so that they cannot
get disassociated from their true PROJECT.
*) Allow loading eeschema library editor from kicad.exe
*) Allow loading pcbnew library editor from kicad.exe
*) Rename LIB_COMPONENT to LIB_PART.
*) Add class PART_LIBS, and PART_LIB.
*) Make PART_LIBS non-global, i.e. PROJECT specific.
*) Implement "data on demand" for PART_LIBS
*) Implement "data on demand" for schematic SEARCH_STACK.
*) Use RSTRINGs to retain eeschema editor's notion of last library and part being edited.
*) Get rid of library search on every SCH_COMPONENT::Draw() call, instead use
a weak pointer.
*) Remove all chdir() calls so projects don't need to be CWD.
*) Romove APPEND support from OpenProjectFiles().
*) Make OpenProjectFiles() robust, even for creating new projects.
*) Load EESCHEMA colors in the KIWAY::OnKiwayStart() rather in window open,
and save them in the .eeschema config file, not in the project file.
*) Fix bug with wxDir() while accessing protected dirs in kicad.exe
*) Consolidate template copying into PROJECT class, not in kicad.exe source.
*) Generally untangle eeschema, making its libraries not global but rather
held in the PROJECT.
* default file ext is now .gbr (the "official extension")
* some outdated commands remoded.
* mainly use mm and 4.5 format instead of inches and 3.4 format. this is mandatory,
because the 3.4 format (comming from old pcbned internal units) creates truncations in coordinates.
(with serious issues in polygons which can appear self-intersecting afer truncation)
2) Change from legacy Cu stack to counting down from top=(F_Cu or 0).
The old Cu stack required knowing the count of Cu layers to make
sense of the layer number when converting to many exported file types.
The new Cu stack is more commonly used, although ours still gives
B_Cu a fixed number.
3) Introduce class LSET and enum LAYER_ID.
4) Change *.kicad_pcb file format version to 4 from 3.
5) Change fixed names Inner1_Cu-Inner14_Cu to In1_Cu-In30_Cu and their
meanings are typically flipped.
6) Moved the #define LAYER_N_* stuff into legacy_plugin.cpp where they
can die a quiet death, and switch to enum LAYER_ID symbols throughout.
7) Removed the LEGACY_PLUGIN::Save() and FootprintSave() functions.
You will need to convert to the format immediately, *.kicad_pcb and
*.kicad_mod (=pretty) since legacy format was never going to know
about 32 Cu layers and additional technical layers and the reversed Cu
stack.
They are now member of EDA_DRAW_FRAME.
This change could fix Bug #1330781 (Background color change in Eeschema affects background color in Pcbnew)
Show page limits has meaning only for the schematic editor, the board editor and the page layout editor.
Draw background color selection exists only in eeschema and page layout editor.
In pcbnew, only a black background is allowed.
A side effect is now the user should set the background color in schematic editor, and the library editor (2 different options).
The default is still the white color.
- Refactored the common part of cursor key movement and crosshair update
in the various GeneralControl
- Add x10 movement with the keyboard (CTRL modifier)
- Avoid fixup of the cursor position by dummy mouse movements generated
by cursor warping (original analysis and idea Chris Gibson)
- Do key handling in a way to permit sub-pixel cursor movement
*) Rework the set language support, simplify it by using KIWAY. Now any major
frame with a "change language" menu can change the language for all KIWAY_PLAYERs
in the whole KIWAY. Multiple KIWAYs are not supported yet.
*) Simplify "modal wxFrame" support, and add that support exclusively to
KIWAY_PLAYER where it is inherited by all derivatives. The function
KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.
*) Remove the requirements and assumptions that the wxFrame hierarchy always
had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
and editors. This is no longer the case, nor required.
*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
quickly. It also gives control to the KIWAY as to frame hierarchical
relationships.
*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
the single KIWAY_PLAYER, see bullet immediately above.
*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
gives the KIFACEs a chance to save their final configuration dope to disk.
*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
these modal frames are distinctly different than their non-modal equivalents.
KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
so this is another important reason for having a dedicated FRAME_T for each
modal wxFrame.
On balance, more lines were deleted than were added to achieve all this.
- Converted the Next/Prev C casts to static casts and removed the type
unsafe ones
- Splitted as virtual the VIA::Flip member instead of using RTTI
- Heavily refactored the 'unconnected track' cleanup routine
- Misc constification
Eeschema, Pcbnew, and Cvpcb all run under the same process now,
FOR THE VERY FIRST TIME!
*) Added KIWAY::PlayerCreate(), PlayerClose(), and PlayersClose().
*) Factored FRAME_T into <frame_type.h> from ID_DRAWFRAME_TYPE.
*) Found that the following command line is helpful for collecting all the *.kiface
files into the <build>/kicad/ directory so that kicad can find them.
$ cp `find . -name '*.kiface'` kicad/
Maybe somebody will want to rework how the CMake files are organized so all
the binaries can go into the same place. See python-a-mingw-us.
*) This might fix the problem on the Mac where child process windows were not
coming to the front. See ->Raise() in kicad/mainframe.cpp.
*) You can set USE_KIFACE to 0 in kicad/mainframe.cpp to chain load child exes
instead of using the KIFACE modules directly, i.e. revert.
if it is running under single_top.cpp or under a project manager.
*) Test Kiface().IsSingle() when adding menus, some operations are not permitted
when running under a project manager and the KIWAY_PLAYER is pegged to a
specific project.
*) Implemented KIWAY::KiFACE() so it loads *.kiface files. They still have to be
in the same directory as the main *.exe launcher, so this presents some difficulty
when the binaries are not yet installed but rather the *.kiface files are still
in their original build directories. For today, I simply copied _pcbnew.kiface
to build/kicad/.
*) Add a test case to kicad/mainframe.cpp just to get an early peek at loading
_pcbnew.kiface under the C++ project manager. Got that working for one
specific invocation just for proof of concept. Surprise, it works.
In PATCH_COMMAND, use patch instead of bzr patch if patch or patch.exe is found (mandatory to use msys2 because bzr patch does not work when using msys2)
! The initial testing of this commit should be done using a Debug build so that
all the wxASSERT()s are enabled. Also, be sure and keep enabled the
USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it
off is senseless anyways. If you want stable code, go back to a prior version,
the one tagged with "stable".
* Relocate all functionality out of the wxApp derivative into more finely
targeted purposes:
a) DLL/DSO specific
b) PROJECT specific
c) EXE or process specific
d) configuration file specific data
e) configuration file manipulations functions.
All of this functionality was blended into an extremely large wxApp derivative
and that was incompatible with the desire to support multiple concurrently
loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
An amazing amount of organization come from simply sorting each bit of
functionality into the proper box.
* Switch to wxConfigBase from wxConfig everywhere except instantiation.
* Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
PGM_SINGLE_TOP,
* Remove "Return" prefix on many function names.
* Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
* Fix building boost for use in a DSO on linux.
* Remove some of the assumptions in the CMakeLists.txt files that windows had
to be the host platform when building windows binaries.
* Reduce the number of wxStrings being constructed at program load time via
static construction.
* Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
these functions are useful even when the wxConfigBase comes from another
source, as is the case in the KICAD_MANAGER_FRAME.
* Move the setting of the KIPRJMOD environment variable into class PROJECT,
so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
* Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
its child wxFrames and wxDialogs now have a Kiway() member function which
returns a KIWAY& that that window tree branch is in support of. This is like
wxWindows DNA in that child windows get this member with proper value at time
of construction.
* Anticipate some of the needs for milestones B) and C) and make code
adjustments now in an effort to reduce work in those milestones.
* No testing has been done for python scripting, since milestone C) has that
being largely reworked and re-thought-out.
Add a workaround to fix a new bug in wxWidgets 3.0 ( Windows specific ) which shows icons only with a size = 16x16 in menus which have attribute wxITEM_CHECK
Add missing calls to Show( false ) to some main frames (Kicad, eeschema, gerbview), to force config saving when closing these windows.
Code cleanup and minor coding style fixes in footprint_wizard_frame
Pcbnew: Code cleaning and bug fix in autoplace functions
Dialog exchange footprints has now a separate button to update the .cmp file, only on request.
*) add hotkey for setting the grid origin as 'S', in board editor, module editor.
*) re-position the function interface for cursor movement from BASE_SCREEN into
class EDA_DRAW_FRAME. This is a prelude to getting rid of BASE_SCREEN or
splitting it up.
File "rules" has instructional text as comments near top.
2) Convert all text files in repo to LF line ending form.
Any checkout done with "rules" in play will convert the working
tree to native line ending, while keeping repo as LF line ending.
(explanation: float is implicitly promoted to double anyway, it's only useful
for storage; also a fp variable forces conversion of other int in the expression
without needing a cast)
Typo fixes in some comments 'floatting' -> 'floating' :D
The plan goes like this:
- eeschema still uses int in decidegrees
- all the other things internally use double in decidegrees (or radians
in temporaries)
- in pcbnew UI the unit is *still* int in decidegrees
The idea is to have better precision everywhere while keeping the user with int i
angles. Hopefully, if a fractional angle doesn't come in from the outside, everything
should *look* like an integer angle (unless I forgot something and it broke)
When the time comes, simply updating the UI for allowing doubles from the user should
be enough to get arbitrary angles in pcbnew.
- Removed spurious int casts (these are truncated anyway and will break
doubles)
- Applied the Distance, GetLineLength, EuclideanNorm, DEG2RAD, RAD2DEG
ArcTangente and NORMALIZE* functions where possible
- ArcTangente now returns double and handles the 0,0 case like atan2, so
it's no longer necessary to check for it before calling
- Small functions in trigo moved as inline
In particular the new mechanism for handling extended color palettes is in place,
included renaming the ini keys and saving the color name instead of its index; this means better forward compatibility with palette changes.
Since ini keys are changed, colors will be reset
* Improve MSG_PANEL_ITEM to handle message panel information.
* Create containers for passing message panel items between objects and
the message panel.
* Rename EDA_ITEM::DisplayInfo to EDA_ITEM::GetMsgPanelInfo.
* Remove all direct manipulation of EDA_DRAW_FRAME from all objects derived
from EDA_ITEM.
* Fix offset errors when scale factor greater is than one.
* Changed behavior of fit in page when not drawing border and
title block to fit board outline in page.
* Fix offset errors when mirroring (still not 100% correct on MSW with
wxWidgets 2.9.4).
* Lots of the usual code cleaning and simplifying.
Eeschema (also Libedit and Libview) starts always to the default grid (50 mils)
Gerbview starts with the last selected grid, but the validity is tested.
In Pcbnew the grid value is always displayed, so it should always be good.
Should allow Pcbnew code easier to change and Gerbview code more understandable and easier to maintain.
Code cleaning (remove dead code, add comments).
Minor other enhancements.
Other scaling factors (MILS_TO_IU_SCALING_FACTOR and DECIMILS_TO_IU_SCALING_FACTOR)
also defined only in convert_to_biu.h.
Allows different scaling value for Gerbview.
Needs more tests.
// This provides better project control over rounding to int from double
// than wxRound() did. This scheme provides better logging in Debug builds
// and it provides for compile time calculation of constants.
#include <stdio.h>
#include <assert.h>
#include <limits.h>
//-----<KiROUND KIT>------------------------------------------------------------
/**
* KiROUND
* rounds a floating point number to an int using
* "round halfway cases away from zero".
* In Debug build an assert fires if will not fit into an int.
*/
#if defined( DEBUG )
// DEBUG: a macro to capture line and file, then calls this inline
static inline int KiRound( double v, int line, const char* filename )
{
v = v < 0 ? v - 0.5 : v + 0.5;
if( v > INT_MAX + 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' > 0 ' for int\n", __FUNCTION__, filename, line, v );
}
else if( v < INT_MIN - 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' < 0 ' for int\n", __FUNCTION__, filename, line, v );
}
return int( v );
}
#define KiROUND( v ) KiRound( v, __LINE__, __FILE__ )
#else
// RELEASE: a macro so compile can pre-compute constants.
#define KiROUND( v ) int( (v) < 0 ? (v) - 0.5 : (v) + 0.5 )
#endif
//-----</KiROUND KIT>-----------------------------------------------------------
// Only a macro is compile time calculated, an inline function causes a static constructor
// in a situation like this.
// Therefore the Release build is best done with a MACRO not an inline function.
int Computed = KiROUND( 14.3 * 8 );
int main( int argc, char** argv )
{
for( double d = double(INT_MAX)-1; d < double(INT_MAX)+8; d += 2.0 )
{
int i = KiROUND( d );
printf( "t: %d %.16g\n", i, d );
}
return 0;
}
*) for footprint access into *.mod files and
*) BOARD save/load
The item_io.cpp and ioascii.cpp have been set off to the side for reference
as *.notused, for awhile.
The CMake options USE_NEW_PCBNEW_LOAD and USE_NEW_PCBNEW_SAVE are gone,
this is now the mandatory usage of the LEGACY_PLUGIN. This should reduce
code maintenance for awhile until the s-expression plugin comes into
play. But at least for legacy format, there is not two code bodies
to maintain any more.
A new LEGACY_PLUGIN footprint library caching scheme is in place which
needs some testing. It should not be any faster, but might give better
results in a networked environment if there is *.mod files on the server.
* Save dialog now supports saving boards to new file format.
* Add CMake option to build s-expression file save.
* Add check to main CMakeList.txt file to make sure nanometers are
enables when the new file format is built.
* Minor tweaks to object format functions for improved output.
* Rename kicad_plugin.h/cpp to legacy_plugin.h/cpp.
* BLOCK_SELECTOR class is not longer derived from EDA_ITEM.
* Encapsulate BLOCK_SELECTOR class member variables and add access methods.
* Move HandleBlockBegin() function from block_commande.cpp to drawframe.cpp.
* Remove virtual methods from top level derived objects per future
coding policy change.
* Remove Doxygen copydoc statement from objects derived from EDA_ITEM
since the comments are automatically copied to the derived object.
* Removed copy and pasted Doxygen comments from objects derived from
EDA_ITEM.
* All objects derived from EDA_ITEM now have consistent hit test method
definitions.
* Remove double function calls from all classes derived from SCH_ITEM.
* Lots of Doxygen comment fixes.
Design rules: increase number of vias and tracks sizes
Pcbnew: netlist reader: change from my recent commits to keep netnames in pads for footprints not in netlist
(allow an user to place some footprints by hand, set pads netnames and do not lost these netnames when loading a netlsit)
Fix other very minor issues.
* EDA_DRAW_PANEL completely encapsulated.
* Moved OSX m_overlay member from EDA_DRAW_PANEL to EDA_DRAW_FRAME where
it is used.
* Doxygen comment warning fixes.
* EDA_DRAW_FRAME completely encapsulated except for DrawFrame member.
* Moved members specific to Pcbnew from EDA_DRAW_FRAME to PCB_BASE_FRAME
or PCB_EDIT_FRAME as appropriate.
* Replace EDA_TOOLBAR with wxAuiToolBar as EDA_TOOL bar provided no
additional functionality and made code less readable.
* Remove EDA_TOOLBAR class definition from wxstruct.h and delete file
wineda_toolbar.cpp.
* Rename tool bar members to something more descriptive since the
horizontal and vertical references wont mean anything once the
tool bars are movable.
* Lots of dead code removal.
* changed all the RotatePoint() functions in trigo.{h,cpp} to take a double as the
angle, which is still in tenths of degrees for now.
* EDA_TEXT::m_Orient is now double, still in tenths of degrees (for a short while),
but the double means parsing files and saving them use a different format string.
++pcbnew
* DRAWSEGMENT::GetStart() and GetEnd() do not operate for S_ARC like they used to.
They are now simply accessors for m_Start and m_End. Use DRAWSEGMENT::GetArcStart()
and GetArcEnd() and GetCenter() for arcs. specctra_export.cpp was the only
source file dependent on the old behavior.
* DIMENSION::m_Text is now contained, not dynamically allocated.
* more kicad_plugin work.
* Removed Pcb_Frame argument from BOARD() constructor, since it precludes
having a BOARD being edited by more than one editor, it was a bad design.
And this meant removing m_PcbFrame from BOARD.
* removed BOARD::SetWindowFrame(), and BOARD::m_PcbFrame
* Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp
* added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance
* a couple dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed,
such as dialog_mask_clearance, dialog_drc, etc.
* Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it
with build_version.h's #define BOARD_FILE_VERSION, although there may be a
better place for this constant.
* Made the public functions in PARAM_CFG_ARRAY be type const.
void SaveParam(..) const and void ReadParam(..) const
* PARAM_CFG_BASE now has virtual destructor since we have various way of
destroying the derived class and boost::ptr_vector must be told about this.
* Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use
an automatic PARAM_CFG_ARRAY which is on the stack.\
* PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array,
since it has to access the current BOARD and the BOARD can change.
Remember BOARD_DESIGN_SETTINGS are now in the BOARD.
* Made the m_BoundingBox member private, this was a brutally hard task,
and indicative of the lack of commitment to accessors and object oriented
design on the part of KiCad developers. We must do better.
Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox().
* Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()
the GetPosition() and SetPosition() changes. It also starts towards making m_Orientation
and m_Thickness fields private with accessors, but does not complete this latter goal.
* Replace C malloc() and free() functions with C++ new and delete
operators or the appropriate STL container.
* Add option to end mouse capture function to skip executing the end
mouse capture callback.
* Lots of coding policy and Doxygen comment goodness.
* Use version of DateAndTime that returns a wxString and delete the
version that takes a char* as it is no longer required.
* Merge StrNumICmp() and StrLenNumICmp() into StrLenNumCmp() to create a
single function for comparing strings with integers and remove a lot
of duplicate code.
* Remove unused strupper from string.cpp.
* Use wxArrayString for sorting the EDA_LIST_DIALOG contents.
* Fixed bug on Windows that prevented the menu short cuts from working
properly.
* Fix duplicate menu short cut keys in KiCad, Pcbnew, and Eeschema.
* Add menu short cuts for all possible menu entries.
* Grammar and spelling fixes in Eeschema, CvPcb, and Pcbnew path and
library dialog tool tips.
* Translate the French file name subrill.cpp to highlight.cpp.
* Lots of coding style policy fixes.
* Correct all user strings and comments for the correct capitalization of
application names according to JP. They are KiCad, Pcbnew, CvPcb,
Eeschema, and GerbView.
* Add a note the the user interface policy about the correct capitalization.
* Move auto save time global variables into PCB_EDIT_FRAME object.
* Move footprint library name list global variable int PCB_EDIT_FRAME
object.
* Improve library back up and temporary file error message strings and make
them translatable.
* PCBNew string unification.
* Translate French code names and comments.
* Coding style policy and Doxygen comment fixes.
* All header files used to create the PCB common library now compile as
stand alone code. This prevents the need to define them in a specific
order to make source code compile properly. It should also now be
possible to relocate the source code to build the common PCB library
to a separate folder.
* Move various locate functions into the appropriate board item object.
* Unified best zoom for all frames derived from PCB_BASE_FRAME.
* Remove track.cpp as it is no longer needed.
* Dead code removal.
* Remove scary frame window pointer member from board item objects.
* Add draw bounding box to gerber draw item for debugging purposes.
Remove or move old .ico and .pgn files and add new icons (.ico files and .png files) in bitmaps_png/icons and bitmaps_xpm/icons
.png files and .ico are used to build desktop shortcuts
Handle variable size bitmaps in kicad.
* Changed <wx-2.8/xml/xml.h> to "xnode.h" in pcbnew_config.cpp to fix bug
when building against wxWidgets 2.9 and above.
* Convert broken wxXmlNode code to use XNODE.
* Overloaded XNODE constructor for creating child nodes.
* Translate French naming conventions.
* Translate French comments.
* Remove tabs from several source files.
* Coding style policy and Doxygen comment fixes.
* Rename all ADD_MENUITEM_* functions to AddMenuItem and move them to
wxstruct.h since they are used by the Kicad main frame classes.
* Move SET_BITMAP and SETBITMAPS definitions to wxstruct.h.
* Fix a bug in SET_BITMAPS that prevented enabling menu item images on
OSX.
* Rename MsgItem to EDA_MSG_ITEM.
* Remove redundant includes from modified files.
* Doxygen and coding style policy fixes.
* Remove most (not all) variables that were initialized but never used that
cause GCC 4.6 to generate a warning.
* Fix bug in schematic library editor best zoom calculation.
In Render, colors shown were the default colors, not the selected colors, when starting Pcbnew or Gerbview,
because colors were not updated after reading the config.
* Move undo item copy global variable into schematic editor frame object
member variable.
* Add helper methods for accessing the undo item copy member variable.
* Fix undetected bug when changing a text type.
* Added an exchange command to the undo/redo base class for handling undoing
a changed item type which cannot be undone by swapping out the variables.
* Revert change to common/hotkeys_basic.cpp that broke hot key behavior.
* Lots of coding policy changes while making the changes above.
(WxWidgets 2.9.1 seems call setlocale( LC_NUMERIC, "" ) when wxConfig read doubles stored in config, but forget to back to current locale.)
Note: perhaps there are some dialogs that need this call to SetLocaleTo_Default() ).
* Minor code cleanup in pcbnew/netlist.cpp
* Set default button on all dialogs that do not already have a defined
default button. The only exception is the EESchema net list dialog
which needs converted over to wxFormBuilder and due to it's design makes
setting the default button in any tab other than the default tab
problematic.
* Fix escape key dialog handling bug in EESchema print post script
dialog.
* Factor change schematic component orientation code out of switch statement
into separate function.
* Remove redundant command events from schematic editor hot key handler.
* Fix grid select box update bug on context menu.
* Fix via size and track width select box update bugs.
* Fix layer pair indicator button update bug.
* Fix auto track width tool bar control enable bug.
* Fix via size and track width select status bug in context menu.
* Fix layer select box and layer control widget select bug when current
layer is removed.
* Add virtual function to notify objects derived from EDA_DRAW_FRAME that
the units setting has changed.
* Coding policy class naming fixes.
* Make EDA_DRAW_FRAME current tool ID member variable private.
* Added global no tool selected ID to replace application specific no
tool selected IDs.
* Change SetToolID to prevent setting the tool ID to anything less than
the new global no tool selected ID and assert on debug builds.
* Change command and update user interface command event handlers to use
new global no tool selected ID.
* Fixed schematic library editor add pin hot key handler.
* CVPcb now uses wxUpdateUIEvent instead of set toolbars.
* Removed duplicate event handlers in CVPcb that were factored into
EDA_DRAW_FRAME.
* Fix definition of GeneralControle() in CVPcb that prevented it from being
called.
* Remove rarely used and scary refresh code GeneralControle() method in all
main frame windows.
* Factor zoom menu and tool bar command IDs down to EDA_DRAW_FRAME.
* Old control state handling code completely removed in all applications.
* Factor common control state handlers into EDA_DRAW_FRAME.
* Replaced EDA_ITEM test for newness with IsNew() method.
* Factor vertical right toolbar command handlers out of giant edit command
switch statement in EESchema and PCBNew.
* Rename all member variables and methods that reference the cross hair
code in draw panel object from cursor to cross hair to eliminate confusion
between the two concepts.
* Rename cursor capture call backs in draw panel object to improve code
readability.
* Create helper class for turning off the cross hair while drawing.
* Remove redundant block clear code.
* Remove redundant mouse capture call back reset code when end capture
call back is called.
* Remove unused function definitions in base draw frame object.
* Lots of minor coding policy and doxygen comment fixes.
* Fix optimized bitmap grid drawing method.
* Enable optimized grid drawing method on Windows and Linux.
* Create a helper class for resetting and restoring device context scale
and origin settings for blitting purposes.
* Use wxLogTrace instead of wxLogDebug for coordinate dumping in
drawpanel.cpp. See comments for more information on enabling coordinate
tracing.
* Add flag to allow hiding the drawing cross hair. Hide cross hair by
default on OSX.
* Move get cross hair device position code from draw panel object to base
screen object.
* Remove redundant parent member variable from draw panel object by
overriding wxWindow::GetParent() method.
* Fix rendering bug in GerbView caused by wxDC scaling change caused by
setting the wxDC clipping region.
* Eliminate the need to have optional background erasing as the change
above fixed that problem as well.
* Default cursor handling improvements.
* Remove base screen methods from draw frame object and correct current
screen methods in derived objects.
* Move restore old wires function code into schematic screen object.
* Make add junction method use current screen position instead of store
position.
* Move poly line ghosting function into the delete current segment method
as that was the only place is was being used.
* Add method to base schematic object of testing if object has a label
that can be incremented.
* Simplified the schematic hierarchy traversing code.
* PCBNew Doxygen warning fixes.
* Changed managed cursor callback definition to include the current
cursor drawing position.
* Modified all managed cursor callbacks to match new definition.
* Added snap to grid option to base drawing frame object.
* Changed add no connect managed cursor callback to use new position
parameter instead of the stored one.
* Lots of coding policy fixes.
* Remove unused member variable m_SizeVisu from base screen object.
* Move nearest grid position code into base screen object.
* Add get cursor position method to base screen object.
* Add position parameter to OnHotKey method in base draw frame and all
derived objects.
* Pass logical position on left mouse button click and double click
events instead of device position.
* Pass logical position to on right mouse button click instead of device
position.
* Use logical event position parameter for locating items in EESchema
instead of the stored position.
* Remove unused position parameter when displaying component edit dialog
in EESchema.
* Comment out debugging macro in eeschema/template_field_names.cpp that was
preventing debug builds using wxWidgets 2.8.x.
* Remove all occurrences if #ifdef USE_WX_ZOOM and all associated code within
the #else/#endif block ( old zoom code ).
* Removed the build option for USE_WX_ZOOM from CMakeList.txt and config.h.in.
* Removed all scaling code in base screen object.
* Fixed buffered paint and buffered client DC on Windows. Buffering works
properly on Linux and Windows.
* Modified kicad_device_context.h to automatically uses buffering on platforms
where double buffering is supported natively.
* Remove all of the scaled versions of the drawing functions in gr_basic.cpp
and any support code.
* Removed all traces of ActiveScreen global variable from eeschema and
gerbview.
* Renamed Recadre_Trace to RedrawScreen in draw frame object.
* Renamed PostDirtyRect to RefreshDrawingRect in draw panel object.
* Lots of code cleaning an Doxygen comment improvements.
* Move schematic wire and bus break code into schematic screen object.
* Move schematic test for dangling ends into schematic screen object.
* Remove left over debugging output in schematic screen object.
* Remove unused file eeschema/cleanup.cpp.
* Fix bug in schematic line object hit test algorithm.
* Fix a string concatenation compile error added in r2752.
* Rename class WinEDA_BasicFrame to EDA_BASE_FRAME.
* Rename class WinEDA_DrawFrame to EDA_DRAW_FRAME.
* Rename class WinEDA_DrawPanel to EDA_DRAW_PANEL.
* Encapsulate file name member of base screen object.
* Encapsulate associated screen member of schematic sheet object.
* Create add screen method to schematic sheet object to simplify setting
the associated screen.
* Move the change file name code in the schematic sheet object to the edit
sheet method in the schematic editor frame object to eliminate message
dialogs.
* Improve reference counting in schematic screen object.
* Add helper type definitions for changing schematic object storage to C++
containers.
Pcbnew: fix that prevents loading modules from libraries (footprint name not identified in lib)
Module Editor: Try to fix incorrect printing. Fixed now only for scale 1. Nor working for other scales. (Work in progress).
Gerbview: Known bug: printing not working.
VRML export: Fix incorrect export of 3D shapes rotations when the 3D shape was rotated.
Rename EDA_Rect::Inside to EDA_Rect::Contains ( EDA_Rect::Inside( const EDA_Rect& aRect ) was very ambiguous )
Fix some Doxygen warnings and erroneous comments; Add comments.
Added: in file dialog, multiple file selection.
Added: Draw mode selector (in left toolbar):
Raw mode:
a Gerber image is drawn on screen without buffering.
Artifacts happen if there are negative items drawn, if more than one Gerber file is shown.
Stacked mode:
each Geber image is drawn in a buffer and after drawn on screen
No artifact with negative items.
Each Gerber image covers previous images.
OR mode (transparency mode):
each Geber image is drawn in a buffer and after drawn on screen
No artifact with negative items.
Each Gerber image is "ORed" with previous images, like in Pcbnew.
Try to optimize Draw function in buffered modes.
(Useful for PC that have problems with "blit" graphic function)
Fix minor issues.
* Changed wxPenStyle which is not define in wxWidgets 2.8 to int and
renamed GRRect to prevent duplicate function definition in gr_basic.
* Add missing wxT() macros to strings in rs274x.cpp.
Added hotkeys editor from David Turner, with a lot of enhancements and fixes
Added pins connections info in intermediate netlist for each compoment. This is redundant, but some netlist formats (ORCADPCB, PSPICE) are very easy to create with this redundant info.
inches and mm, the industry is crazy enough to force us with mixed
design. For example I routinely use imperial units for track size and
clearance, but drilling is strictly a metric issue...
So I added a little parser to recognize a suffix specification in the
unit text boxes... so you can put in things like:
1in (1 inch)
1" (idem)
25th (25 thou)
25mi (25 mils, the same)
6mm (6 mm, obviously)
The rules are: spaces between the number and the unit are accepted, only
the first two letters are significant.
As a bonus, it also recognize the period (.) as a decimal point
substituting it with the correct locale character (there was a wishlist
for it, IIRC). Most useful for number pad fans :D
* Fix a minor problem with wxFileDialog to open a file that no longer
exists in PCBNew.
* Make GerbView open file behavior the same as PCBNew.
* Remove redundant PCB file wild card definition.
* Add open file refactor task to the todo list.
* Fix some minor code formatting issues.
* Some bugs fixed
* Starting enhancements in Libedit: menubar and commands to "plot" current component in PNG or SVF file (SVG file not fully working, must be refined)
* Make USE_WX_ZOOM clipping routine actually clip rather than just test
if line needs drawn.
* Clean up as many USE_WX_ZOOM #ifdefs as possible.
* Minor coordinate rounding improvements.
* Minor scrolling and panning improvements.
* Remove unused KicadGraphicContext object code.
* Implement code to allow wxDC to handle coordinate conversions between
device and drawing units.
* Add build settings to enable wxGCDC for wxGraphicsContext testing.
* Remove wxAUI conditional build cruft as it is now required to build
Kicad.
* Fix scroll increment size regression to prevent jumping around the
zoom center position.
* Add find GDI+ cmake module for building on WXMSW when wxGraphicsContext
is enabled.
* in variable names, change non existent word Hight to High
* Remove redundant tool in left toolbar (option toolbar)
(this option is now in layers manager)
* Show layers in horizontal combo box in same order as in layer manager.
++all:
minor code cleaning.
* Remove redundant background redrawing RedrawActiveWindow.
* Remove redundant managed cursor callback in RedrawActiveWindow.
* Use refresh to redraw instead of directly calling RedrawActiveWindow.
* Remove unused SetDrawBgColor for drawframe.cpp.
* Fix compiler warning in cvpcb/cvframe.cpp.
* Fix menu spelling and syntax errors in pcbnew.
* Rename Trace_Curseur to DrawCursor in common/drawpanel.cpp.
* Fix debug asserts when passing NULL pointers to wxAuiPaneInfo.
* Fix Kicad main window sash sizer bug when using wxAui.
* Remove specctra_test from Visual Studio builds to prevent build errors.
* Add WIN32 to layer widget test so it will build properly on Visual Studio.
* Fixed compiler conversion warnings in PCBNew.
* Fixed worksheet print scaling in PCBNew.
* Minor code renaming.
* Moved ReturnLayerName() to static BOARD::GetDefaultLayerName() and migrated
to a Specctra DSN compatible default layer naming scheme:
Component becomes Front, Copper becomes Back.
* set_color.h: Cmp becomes Front, Cu becomes Back.
* D_PAD::DisplayInfo() changed to use actual copper layer names.
* more layer setup dialog work, moved all programmatic wxControl instantiation
into the wxFormbuilder environment, but this is fraught with danger:
wxFlexGridSizer used the tallest control to establish the row heights, so
be careful about changing control borders in the scroll panel. The vertical
size can explode since just a couple of pixels times the number of rows
is substantial. Currently I am setting a 5 pixel border only left, top, and right
but not bottom.
* Set copper layer count is back in place as a hack until I can get the enabled
layer bit map fully operational.
* Create single event handler for grid size events.
* Fix all frame windows to use new grid size event handler.
* Use offset relative to ID instead of ComboBox index to save last grid size.
* Move last grid size load/save setting into WinEDA_DrawFrame.
* Add equality and assignment operators the GRID_TYPE.
* Add current grid helper methods to BASE_SCREEN.
* Add GetPins helper to LIB_COMPONENT to replace GetNextPin where applicable.
* Add AppendMsgPanel helper to WinEDA_DrawFrame.
* Improve rounding for display of coordinates when millimeter units are selected.
* Split out application specific command IDs to prevent unnecessary rebuilding.
* Eliminate duplicate menu and tool bar command IDs.
* Split component library editor and viewer definitions to separate header files.
* More component library and document file merge code.
* A bunch of minor string readability and consistency fixes.
* Created separate SVN version header.
* Add true config.h for platform dependency checks.
* Add dependency check cmake module.
* Remove some leftover hand crafted make files.
* Remove non-cmake build instructions from COMPILING.txt.
* Fix split _() strings causing Visual C++ compiler error.
* Fix lots of compiler warnings.
* Change project file parameter container from wxArray to boost::vector_ptr.
* Removed lots of redundant header definitions.
* Fixed green_xpm redefinition in ercgreen.xpm.
* Remove some dead code and unnecessary class methods.
Jeff Young
Martin Sivak
jean-pierre charras
Maciej Suminski
Jon Evans
Oliver
Chris Pavlina
Camille
Mark Roszko
Wayne Stambaugh
Tomasz Włostowski
Simon Richter
Marvin Schmidt
Baranovskiy Konstantin
Seth Hillbrand
Seppe Stas
Bernhard Stegmaier
Fabrizio Tappero
John Beard
Eldar Khayrullin
Dick Hollenbeck
Cirilo Bernardo
Ian Roth
Simon Wells
Simon Wells
Wayne Stambaugh
Lorenzo Marcantonio
Marco Serantoni
Emmeran
marco.
Vladimir Ur
Hauptmech
Fabrizio
Jerry Jacobs
Jerry Jacobs
Marco Mattila
Brian F. G. Bidulock
Jerry Jacobs
Jerry Jacobs
jp
charras